cOfocS 1990 21 E 76-79 E (DIN 912 • (D) 2-01 LH *-121 01 ...
SCPD 76/76 DIN · SCPD 76/76 DIN is a dual flow pump with two separate flows of equal sizes.€...
4
Sunfab Hydraulics AB, Box 1094, SE-824 12 Hudiksvall, Sweden. Tel: +46 650-367 00, Fax: +46 650-367 27, E-mail: [email protected] Web: www.sunfab.com SCPD 76/76 DIN is a dual flow pump with two separate flows of equal sizes. SCPD 76/76 DIN gives a maximum flow of 127 + 127 = 254 lit/min and supports a maximum working pressure of 350 bar. It can effectively be directly mounted on gear boxes equipped with engageable and disengageable power take-offs. SCPD 76/76 is a modern, compact pump, which meets the market's high demands on flow performance, pressure, efficiency and small installation dimensions. It is speed optimized and therefore supplied for either left (L) or right (R) rotation direction. Other advantages: • Large displacement gives the possibility of low engine speeds and low noise levels. • Long life due to high demands on material selection, such as bearings, seals, etc. • O-rings on all contact surfaces as well as double shaft seals eliminate oil leakage from the pump and power takeoff. • Highest displacement-to-size-ratio on the market. SCPD 76/76 DIN GB - Printed: 06/03/2014 10:32:55 - Page 1/4
Transcript of SCPD 76/76 DIN · SCPD 76/76 DIN is a dual flow pump with two separate flows of equal sizes.€...
Sunfab Hydraulics AB, Box 1094, SE-824 12 Hudiksvall, Sweden. Tel: +46 650-367 00, Fax: +46 650-367 27, E-mail: [email protected] Web: www.sunfab.com
SCPD 76/76 DIN is a dual flow pump with two separate flows of equal sizes.
SCPD 76/76 DIN gives a maximum flow of 127 + 127 = 254 lit/min and supports a maximum working pressure of 350 bar. It can effectively be directly mounted on gear boxes equipped with engageable and disengageable power take-offs.
SCPD 76/76 is a modern, compact pump, which meets the market's high demands on flow performance, pressure, efficiency and small installation dimensions.
It is speed optimized and therefore supplied for either left (L) or right (R) rotation direction.
Other advantages:
• Large displacement gives the possibility of low engine speeds and low noise levels.
• Long life due to high demands on material selection, such as bearings, seals, etc.
• O-rings on all contact surfaces as well as double shaft seals eliminate oil leakage from the pump and power takeoff.
• Highest displacement-to-size-ratio on the market.
SCPD 76/76 DIN
GB - Printed: 06/03/2014 10:32:55 - Page 1/4
Sunfab Hydraulics AB, Box 1094, SE-824 12 Hudiksvall, Sweden. Tel: +46 650-367 00, Fax: +46 650-367 27, E-mail: [email protected] Web: www.sunfab.com
Line
SC Sunfab Compact
1. Type
PD Dual flow pump
2. Displacement
76/76
3. Direction of rotation
L Left
R Right
4. Sealing
N Nitrile
5. Mounting flange
DL4 DIN 4-h (ISO 76530)
6. Shaft
L35 DIN 5462/ISO14
7. Connection cover
S0 Sunfab standard
8. Connections
S Sunfab standard
9. Additional
2 Optimised
10. Accessories
00 No accessories available
VERSIONS, MAIN DATA Example
SC PD - 76/76 L - N - DL4 - L35 - S0 S - 2 00
Line 1 2 3 4 5 6 7 8 9 10
GB - Printed: 06/03/2014 10:32:55 - Page 2/4
SCPD 76/76 DIN
Sunfab Hydraulics AB, Box 1094, SE-824 12 Hudiksvall, Sweden. Tel: +46 650-367 00, Fax: +46 650-367 27, E-mail: [email protected] Web: www.sunfab.com
SCPD 76/76 DINTheoretical oil flowat pump speed rpm 500
10001500
l/min 37.5 + 37.5 = 7575.0 + 75.0 = 150
112.5 + 112.5 = 225
Displacement cm3/rev 75 + 75
Max pump speedcontinuouslimited
rpm 15001700
Max working pressure bar 350
Weight kg 23.2
Tare-weight torque without valve Nm 34.5
Theoretical power at pressure and pump speed rpm 500
10001500
200 Bar 12.5 + 12.5 = 25.0 kW 25.0 + 25.0 = 50.0 kW
37.5 + 37.5 = 75 kW
250 Bar 15.6 + 15.6 = 31.2 kW 31.3 + 31.3 = 62.6 kW 46.9 + 46.9 = 93.8 kW
350 Bar 21.9 + 21.9 = 43.8 kW 43.8 + 43.8 = 87.6 kW
65.6 + 65.6 = 131.2 kW
Nominal torque on pump shaftat different pressures
200 Bar 239 + 239 = 478 Nm
250 Bar 298 + 298 = 596 Nm
350 Bar 418 + 418 = 836 Nm
Direction of rotation Left (L) or Right (R)
GB - Printed: 06/03/2014 10:32:55 - Page 3/4
SCPD 76/76 DIN
Sunfab Hydraulics AB, Box 1094, SE-824 12 Hudiksvall, Sweden. Tel: +46 650-367 00, Fax: +46 650-367 27, E-mail: [email protected] Web: www.sunfab.com
WARNINGWARNINGWARNINGWARNING
When the pump is running:
1. Do not touch the pressure hose
2. Watch out for rotating parts
3. The pump and hoses may be hot
Sunfab reserves the right to make changes in design and dimensions without notice. Printing and typesetting errors reserved.
SCPD 76/76 DIN
GB - Printed: 06/03/2014 10:32:55 - Page 4/4
