Scissor Lift - Getman · Product Datasheet Updated February 11, 2015 A4 SL Scissor Lift 1 Getman...
8
Product Datasheet Updated February 11, 2015 A64 SL Scissor Lift 1 Getman scissor lifts are a key component of underground mining operations, supporting electrical installations, ventilation fan and ducting installations, pipe installations, ground support operations and explosives charging. Getman’s A64 SL offers a maximum platform height of 4.2 m (14 ft) with a capacity of up to 2,720 kg (6,000 lb), and comes equipped with a telescoping ladder that allows for easy access and egress from the platform without having to lower the platform. Available fold-down wings or sliding platform features provide added flexibility to perform required functions without repositioning the machine. A64 scissor lifts protect miner safety through purpose-built design, including a fully stabilized non-skid platform with leveling capability and fall arrest anchor points located throughout the basket for quick and easy tie off. The lifting structure is compliant with all relevant ANSI, CSA and AS standards.
Transcript of Scissor Lift - Getman · Product Datasheet Updated February 11, 2015 A4 SL Scissor Lift 1 Getman...
Product DatasheetUpdated February 11, 2015
A64 SLScissor Lift
1
Getman scissor lifts are a key component of underground mining operations, supporting electrical installations, ventilation fan and ducting installations, pipe installations, ground support operations and explosives charging.
Getman’s A64 SL offers a maximum platform height of 4.2 m (14 ft) with a capacity of up to 2,720 kg (6,000 lb), and comes equipped with a telescoping ladder that allows for easy access and egress from the platform without having to lower the platform. Available fold-down wings or sliding platform features provide added flexibility to perform required functions without repositioning the machine.
A64 scissor lifts protect miner safety through purpose-built design, including a fully stabilized non-skid platform with leveling capability and fall arrest anchor points located throughout the basket for quick and easy tie off. The lifting structure is compliant with all relevant ANSI, CSA and AS standards.
Product DatasheetUpdated February 11, 2015
A64 SLScissor Lift
2
Technical Specifications
Engine• Tier III approved engine - 4-cylinder
› Mercedes Benz OM904LA, 129 kW (173 hp) @ 2200 rpm › Cummins QSB4.5, 127 kW (170 hp) @ 2200 rpm
• Liquid-cooled, turbocharged• 113 L (30 gal) fuel tank with self-closing cap
Exhaust System• Catalytic exhaust conditioner and silencer
Transmission• Dana Clark 32000 powershift transmission• Three speeds forward and reverse• 4-wheel drive
Axles• Planetary drive axles
› Heavy-duty Carraro 28.43 axle package › Enhanced capacity Carraro 28.60 axle package
Tires• Mine service tires
› 10.00×20-16pr › 12.00×20-28pr
Brake System• Fully hydraulic wet disc service brakes on each axle• Spring applied, hydraulic pressure release wet disc secondary
brake• Automatic secondary brake application upon loss of brake
accumulator pressure, transmission pressure or electrical power
Steering• Orbitrol controlled articulated frame steering• Heavy-duty, self-aligning bearings inside replaceable inserts• Two double-acting steer cylinders with replaceable bushings
in cylinder and frame ears• 40° articulation each direction
Hydraulic System• Hot side/cold side engine layout• Hydraulic hoses routed to cold side of engine• Open center hydraulic circuits with gear hydraulic pump• Diagnostic test ports with quick couple fittings for: each axle,
service brake application pressure, and hydraulic pumps• 10-micron return filter• 151 L (40 gal) hydraulic reservoir
Operator Compartment• Three-point contact for entry and exit• ROPS/FOPS certified compartment (SAE J1040C, CSA B-352,
ISO 3471) › Open canopy › Enclosed cabin with heater and air conditioner
• Operator and passenger seating• Mechanical suspension operator seat• Retractable lap seat belts
Instrumentation• Engine and transmission gauges• Engine temperature• Engine oil pressure• Voltmeter• Hour meter• Tachometer • Transmission clutch pressure• Converter temperature• Brake accumulator pressure gauge• Brake accumulator low-pressure warning• Park brake applied warning light• Audio/visual alert for high engine temperature• Audio/visual alert for low engine pressure
Electrical System• 12 V, 140 A alternator• Lockable electrical master switch (lockout)• Maintenance-free 12V batteries• LED Lighting package (IP69K rated): two 900 lm front
headlights, two 900 lm rear headlights• Sealed and oil resistant wiring• Fully sealed connectors• Fully sealed electrical boxes
Other General Equipment• Variable audio backup alarm (87-112dBA)• 2.3 kg (5 lb) fire extinguisher• Wheel chocks• Four nozzle Ansul fire suppression system tied to engine
shutdown (LTA-101-30)
Optional Equipment• Wiggins fill system• Lincoln auto-lubrication package• Stabilizer interlock control system (SICS) package• Ansul Checkfire automatic actuation fire suppression system
with linear detection loop
OPTIONAL FRONTMOUNTED JACKS
18°
7911[25’-11”]
12.00 x 20TIRES
40°
4268[14’]
311[12.25”]
GRNDCLRN
2292[7’-6”]
2771[9’-1”]
4144[13’-7”]
2153[7’-1”]
2134[7’]
3353[11’]
2000[6’-7”]
1000[3’-3”]
R4564[R15’]
4144[13’-7”]
R7371[R24’-2”]
5569[18’-3”]
4479[14’-8”]
3271[10’-9”]497
[20”]621
[24”]
2404[8’-11”]
1220 [48"]STABILIZERS
7911[25’-11”]
12.00 x 20TIRES
1220 [48"]STABILIZERS
18°
[98”]2492
40°
4268[14’]
311[12.25”]
GRNDCLRN
2292[7’-6”]
4119[13’-6”]
2115[6’-11”]
3062[10’-1”]
1829[6’]
3340[11’]
2000[6’-7”]
1000[3’-3”]
4119[13’-6”]
R4599[R15’-1”]
R7371[R24’-2”]
5415[17’-9”]
4295[14’-1”]
2034[6’-8”]
3267[10’-9”]
2404[7’-11”]
4267[14’]
12.00 x 20TIRES
18°
40°
7868[25’]
311[12.25”]
GRNDCLRN
2284[7’-6”]
2483[8’-2”]
4005[13’-2”]
2153[7’-1”]
2127[7’]
3289[10’-10”]
2000[6’-7”]
1000[3’-3”]
4005[13’-2”]
R4551[R14’-11”]
R7223[R23’-8”]
2083[6’-10”]
5337[17’-6”]
4220[13’-10”]
Product DatasheetUpdated February 11, 2015
A64 SLScissor Lift
3
Scissor Lift System*
Scissor Lift Setup• 2.13 m × 3.35 m (7 ft × 11 ft) platform with non-skid deck• Fixed safety railing with midrail• Telescopic ladder• Scissor lift mechanism
› 178 mm × 102 mm (7 in × 4 in) arms with 2,500 kg (5,500 lb) platform capacity
› 178 mm × 127 mm (7 in × 5 in) arms with 2,700 kg (6,000 lb) capacity
• Hydraulic stabilizers with internal pilot check valves › 610 mm (24 in) › 1220 mm (48 in)
• Engine start and engine stop on platform• Fire suppression actuator on platform
Scissor Lift Setup – Additional Options• Counterbalance valves on lift cylinders, and emergency
lowering pump-off package• Air-powered electric/hydraulic system (using mine air)• Electrical platform controls located in operator’s
compartment• Manual pipe jacks, sliding laterally on end rails
Scissor Lift – Sliding Platform Option• Scissor lift mechanism with 178 mm × 127 mm (7 in × 5 in)
arms• Platform capacity
› With Carraro 28.43 axles: 2,040 kg (4,500 lb) › With Carraro 28.60 axles: 2,700 kg (6,000 lb)
• Side shifting platform function: 497 mm (20 in) to left, 621 mm (24 in) to right
Scissor Lift – Winged Platform Option• Scissor lift mechanism with 178 mm × 127 mm (7 in × 5 in)
arms• Platform capacity
› With Carraro 28.43 axles: 2,040 kg (4,500 lb) › With Carraro 28.60 axles: 2,700 kg (6,000 lb)
• Hydraulic fold-down wings increases platform working width to 3380 mm (133 in)
*Consult Getman for special configurations
A64 SL A64 SL Wing A64 SL Slider
Product DatasheetUpdated February 11, 2015
A64 SLScissor Lift
4
Design Features and Layout
Engine start/stop and fire suppression activation controls
located on the platform
*Optional 48in leveling jacks for leveling on grade
Fluid levels easily checked using ground-
level sight gauges
All filters and lubrication points accessible from
ground level
Telescoping ladder for easy access/egress with raised platform
Built on the reliable Getman A64 Chassis
Fall arrest anchors
Non-slip deck surface
*Standard 24” stabilizers not shown
4267[14’]
12.00 x 20TIRES
18°
40°
7868[25’]
311[12.25”]
GRNDCLRN
2284[7’-6”]
2483[8’-2”]
4005[13’-2”]
2153[7’-1”]
2127[7’]
3289[10’-10”]
2000[6’-7”]
1000[3’-3”]
4005[13’-2”]
R4551[R14’-11”]
R7223[R23’-8”]
2083[6’-10”]
5337[17’-6”]
4220[13’-10”]
Product DatasheetUpdated February 11, 2015
A64 SLScissor Lift
5
Dimensions and Maneuverability
Machine Length 7868 mm 300 in
Wheelbase Length 4267 mm 168 in
Ground Clearance 311 mm 12.25 in
Machine Height (Canopy) 2284 mm 90 in
Machine Height (Platform) 2483 mm 98 in
4267[14’]
12.00 x 20TIRES
18°
40°
7868[25’]
311[12.25”]
GRNDCLRN
2284[7’-6”]
2483[8’-2”]
4005[13’-2”]
2153[7’-1”]
2127[7’]
3289[10’-10”]
2000[6’-7”]
1000[3’-3”]
4005[13’-2”]
R4551[R14’-11”]
R7223[R23’-8”]
2083[6’-10”]
5337[17’-6”]
4220[13’-10”]
Product DatasheetUpdated February 11, 2015
A64 SLScissor Lift
6
Dimensions and Maneuverability(Machine width and turning radius may be affected by stabilizer mounting points)
Machine Width 2153 mm 85 in
Platform Width 2127 mm 84 in
Platform Length 3289 mm 132 in
Inner Turning Radius 4551 mm 179 in
Outer Turning Radius 7223 mm 284 in
0.0
10.0
20.0
30.0
40.0
50.0
0.0 5.0 10.0 15.0 20.0 25.0
% I
ncl
ine
KPH
0.0
10.0
20.0
30.0
40.0
50.0
0.0 5.0 10.0 15.0 20.0 25.0
% I
ncl
ine
KPH
Maximum RecommendedLongitudinal Tramming Gradient
Maximum RecommendedTransverse Tramming Gradient
20%
0% 0%
9%
Product DatasheetUpdated February 11, 2015
A64 SLScissor Lift
7
Engine and Performance
Mercedes Benz OM904 Engine Package Cummins QSB4.5 Engine Package
Manufacturer Mercedes
Model OM904
Stage Tier III
Design 4 Cylinders in line, water cooled
Max Power 129 kW (173 hp) @ 2200 rpm
Exhaust System Catalytic exhaust conditioner and silencer
Aspiration Turbocharged
Fuel Consumption 220 g/kW-hr (0.361 lb/hp-hr)
Manufacturer Cummins
Model QSB4.5
Stage Tier III
Design 4 Cylinders in line, water cooled
Max Power 127 kW (170 hp) @ 2200 rpm
Exhaust System Catalytic exhaust conditioner and silencer
Aspiration Turbocharged
Fuel Consumption 243 g/kW-hr (0.399 lb/hp-hr)
Speed Chart with Estimated GVW: 12,250 kg (27,000 lb)• Dana Clark 32000 Transmission• Standard Heavy-Duty Carraro 28.43 Axles• 10×20-16pr Mine-Duty tires
0.0
10.0
20.0
30.0
40.0
50.0
0.0 5.0 10.0 15.0 20.0 25.0
% I
nclin
e
KPH
1st Gear
2nd Gear
3rd Gear
Speed Chart with Estimated GVW: 12,250 kg (27,000 lb)• Dana Clark 32000 Transmission• Standard Heavy-Duty Carraro 28.43 Axles• 10×20-16pr Mine-Duty tires
0.0
10.0
20.0
30.0
40.0
50.0
0.0 5.0 10.0 15.0 20.0 25.0
% I
nclin
e
KPH
1st Gear
2nd Gear
3rd Gear
Getman Corporation59750 34th Avenue
Bangor, MI 49013 USA
TelFaxwww.getman.com
+1 (269) 427-5611+1 (269) 427-8781 Product Datasheet
Updated February 11, 2015
A64 SLScissor Lift
8
Getman Corporation assembled this datasheet with the intention of passing along the most accurate information possible, however this document shall not be binding in any way and shall be considered informational only. All values stated herein are theoretical in nature. All orders are accepted based on the terms and conditions set forth in the individual purchase or sales agreement. Getman reserves the right to make changes to the specification herein at any time and without further notification.
Pictured machines in this document may contain optional and additional equipment.
About Getman Corporation
Getman Corporation is a global supplier of mobile equipment to the mining industry, offering customer-specific solutions to underground mines in the production and production support classes of equipment. All Getman equipment is designed with extensive research and development and is supported by over fifty years of experience in serving the underground mining industry.
Through our network of distributors we sell and support our products on six continents, offering exceptional product solutions and following up with world class aftermarket support. At Getman Corporation, designing and building trucks for the underground mining industry is what we do. We take pride in being the preferred supplier of underground production and production support equipment to miners globally by offering customer-specific, value-driven and long-lasting solutions.
For more information contact your Getman distributor or email us at [email protected], or visit our website at www.getman.com.
For parts or service support, email us at [email protected] or [email protected].
