Minigraph A2M 200 

 

 

 

  CODE NO. 3768   MINIGRAPH    A2M  200  

The Minigraph A2M 200 is the new manual foot operated frame assembly machine with a simplified design.

 The technology applied for the mechanical components ensures the same heavy duty and    reliability performances as all the other machine in the Alfamacchine range.

The A2M 200 is well suited for low levels of production, the hobby trade, beginners or areas where noise is a major concern.

The only manual machine which can join moulding up to 180mm wide, it offers a lot of advantages such as

1.          Tilting bench,2.           Front or rear operating mode,3.           Minimum servicing,4.           Easy to use and reduced weight. 

The machine is delivered in an assembly kit box and is easily assembled  in a few minutes for use.

 Technical Specification

  Moulding thickness   6 mm to 90 mm  Moulding width   Up to 180mm ( 7inch.)  Type   Pedestal  Weight   38 Kgs.  Dimension   380 X 600 X 1150 mm

Manual bench disk sander

 Manual Bench disk sander, allows to recover perfectly cutting faults setting up the angle at 45 degrees.

 It utilizes 30 cm (12") abrasive disks.  The Disk Sander consistence of construction and its working easiness, are the safe-life for a 

long term duration.  Suitable in different working environments from handcraft to mass production.

Technical Specification

Working Angle 45°

Clamping type  Mechanical

Movement Manual

Dimension body 500 x 700 x 80mm

Fly-wheel diameter 30 cm (12") in dia.

LOGAN

Logan Mount Cutter 

  HANDHELD MAT CUTTER 1100 

    

  

Cut unique shapes and designs into matboard using the Logan Freestyle handheld mat cutter. It's easy to use with either your left or right hand, and is Logan's most affordable mat cutter. Follow traced designs by pushing or pulling the cutter. Available in red or silver.

LOGAN handheld mat cutter 1100     

Use Logan 324 Blade                            

 

                 TEAM SYSTEM                  

     

Get it all once. This practical combo system includes a 40’’ / 1016 mm straight edge and a LOGAN HANDHELD MAT CUTTER for accurate, high quality mat cutting. Just mark your borders using the rule red straight edge, attach the cutting head, and cut from line to line. All models include a non -slip rubberized base, US or metric ruled straight edge, and a LOGAN HANDHELD MAT CUTTER. Can also be used with LOGAN GLASS CUTTER or Straight Cutter.LOGAN 40’’ with

LOGAN 2000 push style Handheld Mat Cutter   

Use  Logan 270  Blade                                                       

 

      INTER MEDIATE       

     An   economical,   all   purpose,   40’’/1016mm   mat   cutting system capable of cutting full 32’’ x 40’’ sheet of mat board. Includes parallel mat guide for setting border widths up to 4 1/4’’,   90°   -  degree   squaring  bar   for   true   corners,   straight cutting head.  Designed for Artists,  photographers,  crafters  

and framers.   Includes creative matting instruction and five extra Blades.

LOGAN Intermediate 401 mat Cutter 40’’                             

Use Logan 270 Blade                                                        

 

  LOGAN FRAMER'S EDGE MOUNT CUTTER  

 

    

Heavy-duty construction, rich features, and an attractive look make the Framer’s Edge the preferred system for framers and serious artists. Handles high production mat as well as small projects. Teflon coated cutting bar provides smooth cutting and need no lubrication. Parallel mat guide slides smoothly in aluminum channels and enables quick, accurate border measurements up to 5 ¼" ‘’(133 mm ). Fully scaled 27’’ squaring arm hold mats perfectly square. Base is 3/4’’ durable composite board laminated surface, easy to clean laminate. Includes production stop, 10 extra blades, dual straight & bevel cutting heads, and fully illustrated mat cutting manual.

 

Bevel Cutting Head 

‘’ Start ” and “ Stop ” indicator movable production stop lets you cut all sides without readjusting stops or marking mat.

Comfortable ergonomic handle

 

Straight Cutting Head

Automatic lock-down pin holds blade in cutting position

Comfortable ergonomic handle 3 position depth adjustment

LOGAN 655 Professional Mat Cutter (48"/122cm)                                                                                                                   Uses Logan M-269 blade                                                              

 

  SIMPLEX MAT CUTTER  

    

Provides the quality and ease of use of a professional mat cutter at a fraction of the price. Features include dual guide rail stops for fast production mat cutting, a 27" (68.6cm) squaring arm for easy material downsizing, parallel mat guide for setting border widths up to 5-1/2" (13.97cm), durable laminated surface, straight cutting head, and bevel cutting head. Also available in a 60" (152cm) model. Includes creative matting instructions and five extra blades.

    LOGAN 750 (40"/101cm)         

                 LOGAN 760 (60"/152cm)         

  Uses Logan 270 blade            

 

  LOGAN  COMPACT   MOUNT  CUTTEC  

    

Versatile, portable 32" (81cm) mat cutter provides affordable and professional results. Open ended guide rail allows bevel Cuts in mat boards of any size. Downsize Mat board up to 29-1/2" (74.93cm). Includes parallel mat guide for setting border widths from 3/4" (1.9cm) to 4-1/4" (10.8cm), safety lock to keep mat guide secure during cutting, spring loaded, serrated aluminum guide rail, five extra blades, and a fully illustrated matting instruction guide. Includes bevel and straight cutting heads.

    LOGAN Compact  Mount Cutter   

  Uses Logan 270 blade                   

 

  BEVEL CUTTING HEAD 

    “Start" and “stop"  indicator  push  style  blade  action  retractable  blade  holder  adjustable  blade  depth  patented  blade  slot.

 

  STRAIGHT CUTTING HEAD  

 

3  blade  settings (safety,  matboard,  Foamboard)  Larger, ergonomic, comfortable  handle "start"  and "stop" indicator  safety  blade cover.

Fletcher Mutli material cutter 3100

 

Fletcher Multi Material Cutter can cut:

  Glass up to 6mm (requires steel glass wheels     set-02-120)   Foam Board, Gator Board, Mount Board, Card Board up to 12mm (requires knife

blade set-05-004)   MDF Board/ Hard Board up to 3mm (requires MDF/ Hard Board cutting wheels

set-05-715)   Acrylic/ Plastic/ PVC sheets up to 6mm (requires plastic scoring blades-05-712/

plastic cutting clades 05-711)   Aluminium Sheet up to 1mm (requires Aluminium cutting set-05-716)   Vertical cutting capacity 63” (1.60mtr) to any width.

Features:

  Wall mounted space saving.

  Single hand operation of head.   Glass and Plastic are broken out with single hand operation.   Cut’s debris-free no secondary cutting.   Cuts wide range of materials

F3100 unit comes with-

  Pillar post for Mount Board/ Foam Board/ MDF/  Plastic & Glass.   Mount Board/ Foam Board blades, Plastic blades,   Steel 120º Glass wheel unit,   MDF Cutting wheel set,   Measuring stop.

Optional Heads

12-224 Aluminium Pillar post with wheels. 12-225 PVC cutting Pillar post 04-110 Site line laser assembly. 04-101 Optional Mount stand.

ACCESSORIES  

                                   CUTTING MATS                                     

 

        

A range of top quality self-healing, cutting mats, available in two sizes.  Made of a 3-ply Polypropylene construction, this, as well as offering a non-slip surface, will allow a blade to be run across it without causing permanent damage.

SIZE ( 24” x 35”)                                         SIZE ( 40” x 60”)                                          

          VACU FOAM                    CODE NO.  A2208            

       A thin grey foam, specially designed for use with Vacuum Presses.

     

       PIERCING TOOL                    CODE NO.   A2236       

 

        

Used to perforate unpierced  PVC heat seal films before laminating.A special roller with sharp spikes                                                                              

                         HOT PRESS FILM DISPENSER                     

     

Hot Press Film Dispenser is designed to be fitted either on Hot Press Stand or can be mounted on wall. It can hold upto 6 rolls of any Films & Mounting tissues

     

                            HOT PRESS STAND                               

 

    

 This is designed to  install Hot Press machine on the stand  safely. It has one drawer & a shelf where one can store art work & consumables.

HGP 260HGP 360

Wooden plaque

     

   

This imaginative process is less expensive & alternative to framing.

Wooden plaque is designed for laminating Photo Graphs, Prints, Posters, Drawings, Certificates...

Wooden Plaque offers a clean professional look and a wide range of possible surface finishes and textures.

It is ideal for high humidity environment Protects from moisture, heat & dirt, resist scratching, non reflective, safe-no glass. Special ultraviolet, inhibitor reduces fading, cleans easily with soap & water. Available in standard sizes. Colour available : Black colour available in stock.

Golden, Silver & Rosewood colour also available on request.

                                    

------------ Standard Wooden Plaque ------------ 

                     

------------- Name Plate Plaque ------------- 

               4” X 8.5”

                10" X 10"

         8" X 10"                             8" X 11"

 ------------- Photo Plaque -------------      WOODEN PLAQUE

WOODEN PLAQUE WITHMETAL ROD

WOODEN PLAQUE WITH OUTMETAL ROD

Size Size

2” X 3” 10” X 15”

3” X 4” 12” X 15”

3.5” X 5” 12” X 16”

4” X 6” 12” X 17”

5” X 7” 12” X 18”

6” X 8” 12” X 24”

6” X 9” 12” X 30”

8” X 10” 12” X 36”

8” X 11”  

8” X 12”  

10” X 12”  

NAME PLATE PLAQUE

Size

3” X 12”

4” X 12”

4” X 18”

PHOTO PLAQUE

Size Window IMAGE

4” X 8.5” Single

8” X 10” Single

8” X 11” Double

10” x 10” 4 Window