SCIN AB - WasteEnergy
description
Transcript of SCIN AB - WasteEnergy
Flexible “green” solutions
for electric and heat energy production
T H E G R E E N E N E R G Y S O L U T I O N
specializes in the
Waste-to-Energy sector, providing com-
mercial, construction and consulting services.
WASTEENERGY is an affiliate of the Swedish company
SCIN AB.
The company’s primary field of expertise is in the exploitation of
biogas and various low-energy gases (such as waste gases) to pro-
duce electricity and thermal energy with zero emissions. In this frame-
work, has established a partnership with EECT-
Turbomachinery to install and service the cleanest power stations in the
market – all manufactured by FlexEnergy, the leader in renewable, green
and flexible energy production.
the future drives us to green energy
exec
utive
sum
mar
y
T H E G R E E N E N E R G Y S O L U T I O N 4
5
The implementation of the eco-friendly FlexEnergy electric and thermal
power stations, installed by the partnership of EECT-Turbomachinery and
, is a proposal not only ecological but also finan-
cially sound, due to the high prices of energy produced from renewable
sources and enjoys the expertise and service support of the world leaders
in this field.
The legal framework regarding Renewable Energy Sources (RES), which
ensures the sale of produced power and energy savings in commercial,
industrial and residential implementations, guarantees the profitability of
the corresponding technological investment.
The partnership of EECT-Turbomachinery and ’s tar-
get is to install and service the FlexEnergy technology either through
direct sale to interested producers (in the private or public sector) or
through the installation, operation and exploitation of the techno-
logy on its own behalf under various types of collaboration with
such producers.
The concept
SCIN (ScandInvestor) AB was founded in Stockholm in 2010.
The company takes pride in its efforts to become recognizable
as a Swedish investment company that is both significant and
valuable for its humanitarian message and the satisfaction of
its investors-shareholders. It considers that businesses, profit,
people and the environment are equally significant factors in
attaining long-term success. In this framework, SCIN strives to be
part of the solution to existing environmental problems and affect
positively our way of life. This strong principle is fully implemented
in the aims and priorities of the company and plays a lead role in the
development of its strategy.
T H E G R E E N E N E R G Y S O L U T I O N
6
Α completesystem that
convertsmethane into
clean energywith almost
zero emissions.The investment areas where SCIN is active
include:
“Green” production of electrical
power
Waste processing
Production of biogas and biodiesel
Mining of gold, diamonds and other minerals,
oil, bauxite, etc.
Activities related to the infrastructure and networks of a
country
Development projects and activities
Social programs (education, training, health, etc.)
The collaboration
EECT-Turbomachinery is an European bases company specialised in
combustion technologies and official sales partner of FlexEnergy Inc.
SCIN AB represents EECT-Turbomachinery in Scandinavia,
Greece, Cyprus, Albania and the GCC.
The implementation
SCIN AB, has entrusted the vision for green energy produc-
tion implementation to , an effort fully
supported by our international group, network and people
with many years of expertise in the investment and energy
sectors.
7
THE CLEANEST COMBUSTION TECHNOLOGY AVAILABLE TODAY
Clean energy production
offers a range of innovative solutions for energy
production with nearly zero emissions. These solutions revolve around
the production of heat and electrical energy (cogeneration) from a wide
range of fuel sources, including low quality gas. Its personnel spe-
cialization along with innovative technology guarantees the imple-
mentation of optimal solutions for the production of energy from
gaseous waste.
The European legislative
framework for renewable energy
- DIRECTIVE 2001/77/EC
September 27, 2001 for the promotion of electricity produced
from renewable sources in the internal electricity market.
- DIRECTIVE 2003/30/EC of May 8, 2003
on the promotion of biofuels or other renewable fuels for transport.
- DIRECTIVE 2009/28/EC of 23 April 2009 on the use of energy
from renewable sources and amending and subsequently repealing
Directives 2001/77/EC and 2003/30/EC
8
The technology
FlexEnergy Inc. is a technology firm.
It is reputed for top technological solu-
tions through its commitment to develop the
cleanest energy platforms in the world· the Flex
Turbine MT250 and the Flex Powerstation FP250.
This dedication, combined with profound know-how
and extensive expertise, has turned FlexEnergy into one
of the fastest developing industries in the market.
FlexEnergy possesses the cleanest engineering technology for
internal combustion turbines. Three from among FlexEnergy’s energy
platforms are promoted and installed by the partnership of EECT-
Turbomachinery and , as most appropriate for its
target collaborations in the public and private sector. They all use gases con-
taining methane and natural gas, for the production of basic energy loads and the
reduction of greenhouse gases. More specifically, these stations are:
The Flex Powerstation FP250, which runs on the widest range of fuels
down to as low as 5% methane, while delivering emissions that are almost
undetectable.
The Flex Turbine MT 250 EX, an air turbine to be used with an external heat
source that can be customized and easily integrated into an existing power
generation process.
The Flex Turbine MT250 G3, the third generation of FlexEnergy’s proven gas
turbines, which offers specific tested enhancements in its performance.
T H E G R E E N E N E R G Y S O L U T I O N9
The proposal
The partnership of EECT-Turbomachinery and deploying the
innovative Flexenergy technology, utilizes a broad of fuel sources, including otherwise
unusable low quality gases from industrial and other activities, in order to produce clean
energy.
Applications:
Active or inactive landfills
Sewage waste processing installations
Biogas plants from anaerobic digestion of biomass
Biomass combustion
Cogeneration of energy in industrial, commercial and residential applications
Enterprises in the exploitation of natural gas and oil
Concentrated solar power plants (CSP)
The partnership of EECT-Turbomachinery and promotes and
installs the FlexEnergy power stations and turbines described above. The company’s target
collaborations, in both the public and the private sector, fall into two different categories:
1. Direct sale of the energy platforms to producers (or prospective producers), with
installation and service support.
2. Installation of the equipment and own exploitation of the produced energy under
various types of collaboration.
The service support and spare parts of these installations are provided from the company’s
central facility in the Netherlands. They include monitoring and synchronization on a 24/7
basis over the Internet as well as local service support within 48 hours.
T H E G R E E N E N E R G Y S O L U T I O N11
THE CLEANEST COMBUSTION TECHNOLOGY AVAILABLE TODAY
Ultra-clean
electricity and
useful thermal
energy is
generated from a
rugged and efficient
turbine system.
A Turbine for the timesGas turbine-powered generators
represent the cleanest combustion
technology available today. The
250 kW Flex Turbine™ leads the
way with its clean, low emissions
technology as the very best way to
consume less and generate more.
At the heart of this extraordinary
equipment is a simple, powerful
single-shaft design that has proven
to be one of the most reliable and
rugged in its class.
The MT250 successfully operates in a variety of environments.
Combined Heat and Power (CHP)
The 250kW system provides clean, continuous power to a facility
while it recovers heat for greater efficiency in on site heating,
cooling and hot water systems. It is the cleanest burning and
most robust gas turbine suitable for industrial or commercial
applications, such as medical facilities, universities, public
buildings.
Renewable Fuel Sources
FlexEnergy technology enables customers to generate continu-
ous energy from methane while attaining low emissions of NOx,
CO and VOC’s. The technology is suitable for landfills, waste
water treatment plants, food processing facilities, breweries,
agricultural waste handling facilities and biomass plants.
Oil & Gas Production
Hydrocarbon fuels can result from many operations along the
oil/gas recovery stream. “Raw” gases associated with upstream
recovery operations can often be conditioned for direct use
with a turbine. Hydrocarbon constituents can be used as fuel
as long as sufficient dew point suppression can be maintained.
Overhead vapors from downstream processing with significant
ethane and propane content represent good opportunity fuel
gases.
Flex Turbine ΜΤ250™
T H E G R E E N E N E R G Y S O L U T I O N
prod
ucts
12
• Generates reliable power that provides
energy security and the ability to supply
electricity to priority loads in the event of
a grid outage.
• Has a long-term field operating record in
diverse applications and environments.
• Contains an internal waste heat recovery
system that results in a compact
footprint.
• Provides heating/cooling capability in
addition to electricity resulting in energy
savings over time.
• Hedges against increasing electricity
prices by ensuring predictable costs.
• Increases power output in colder
temperatures.
• Performs in the harsh environments
due to its durable, rugged design.
• Has low emissions as a result of its
patented low-N Ox combustor.
• Recuperates engine heat to enhance
turbine efficiency.
• Has integrated fuel-gas booster
available.
• Is CARB Certified for landfill gas, digester
gas and natural gas
HOW IT WORKS
The Flex Turbine™ MT250 operates effectively using a wide range of gaseous fuels.
Its ability to adjust the combustion turbine technology, allows the MT250 to make clean
and efficient fuel consumption of a broad spectrum of caloric values - even with gas
30% methane content. Thus, low-fuel blends (biogas) or too high in energy (natural
gas) that other technologies are unable to exploit, the MT250 reclaims them.
Advantages of a Flex Turbine™ MT250
13
The MT250 G3 is a complete system for producing electricity and thermal energy with a gas turbine.
The MT250 G3, the third generation of FlexEnergy’s proven gas
turbine with nearly one million operating hours in the field,
boasts the following improvements:
CHARACTERISTICSNominal Electrical Output 250kW
Minimum Fuel Higher Heating Value 300Btu/scf
Minimum Fuel Supply Pressure 80-115 psig
NOx Concentration in Exhaust Gas <5ppm
CO Concentration in Exhaust Gas <5ppm
Heat Rate (HHV) 12645 Btu/kWh
Electrical Efficiency (LHV) 30%
Exhaust Gas Temperature 450-5000 F
Exhaust Gas Mass Flow 4.7 lb/sec
System Weight 14500 lbs
System Footprint 11 ft x 7 ft
STRENGTHS
Low Emissions; Carb Certified
High Maximum Output
Regulatory Compliance
Long Term Field Operating Experience
Robust System Design
MARKETS
Higher Quality Fuel Sources
Cogeneration Applications
Active Landfills
Associated Petroleum Gas
Digester Gas
Natural Gas Systems
Flex Turbine ΜΤ250 G3
prod
ucts
T H E G R E E N E N E R G Y S O L U T I O N 14
The Flex MT250 EX is a gas turbine, which takes advantage of hot air from an external heat source to produce electricity.
This system provides customers the flexibility to produce electricity and use-
ful thermal energy through their applications. The Flex MT250 EX is the only
turbine in its class to offer such options to the customer.
CHARACTERISTICS
Nominal Electrical Output 250kW
Air Mass Flow Rate 2,13 kg/sec. (4,7lb/sec.)
Package Footprint 3.35 mx2.13 m (11ft x 7ft)
STRENGTHS
- Easy Integration to Custom Processes or
Systems
- Comprehensive Development Packaging
- Robust System Design
- Compact Power Source
- Integrated High Effectiveness Recuperator
MARKETS
Ideal for applications such as biomass combustion. Concentrated Solar
Power (CSP) heating and heat capture from industrial processes.
Flex Turbine ΜΤ250 EX
THE CLEANEST COMBUSTION TECHNOLOGY AVAILABLE TODAY
15
GAS TURBINE CYCLE
Generating clean energy from greenhouse gas sources such as landfills, digesters, coal mines, oil fields and industrial processes is beyond the capability of existing energy technologies.
The Flex Powerstation™ (FP) now fills this gap with its ability to utilize all sources of methane.
The Flex Powerstation™ is the integration of an oxidizer sys-
tem (instead of conventional internal combustion engine) and a
FlexEnergy turbine, that creates an electricity and thermal energy
production system with almost zero emissions and a wide range
of gaseous fuels. The FP250 is able to operate on dilute gas
streams with as little as 5% methane content. The FP250 tolerates
siloxanes and moisture.
Near Zero emissions
Fuel Flexibility (50 Btu/scf to 2,000+)
<1 ppm NOx and CO Emissions
Minimal Fuel Conditioning
Low Maintenance
Integrated Heat Recovery
Nominal Electrical Output1 250kW
Minimum Fuel Higher Heating Value 1.9 MJ/m3 (50Btu/scf)
Fuel Supply Pressure Range 21-34 kPa (3-5 psig)
NOx Concentration in Exhaust Gas <1ppm
CO Concentration in Exhaust Gas <1ppm
Heat Rate (HHV)1 15400 kJ/kWh (14600 Btu/kWh)
Exhaust Gas Temperature 232-2600C (450-5000 F)
Exhaust Gas Mass Flow1 2.13 kg/s (4.7 lb/sec)
System Weight 24500 kg (540000 lbs)
System Footprint732cm x 274 cm x 716 cm tall (24 ft x 9 ft x 23.5 ft)
FLEX
ENER
GY P
OWER
STAT
ION
™
MARKETS
PRODUCTION OF RENEWABLE
ENERGY SOURCE
• Landfills
• Wastewater Treatment Plants
• Agricultural processing plants,
dairies, industrial waste etc. by
anaerobic digestion
• Biogas-Tail Gases
ADDITIONAL GAS SOURCES
• Associated Petroleum Gas
• Gas fields
• Preparation of Natural Gas Pipeline (gas)
• Flue gas from other applications
• Natural Gas Pipeline
Flex Powerstation™
THE CLEANEST COMBUSTION TECHNOLOGY AVAILABLE TODAY
16
Advantages of the Flex Powerstation™
Generates electricity from existing gas sources at landfills, anaerobic
digester applications, such as wastewater treatment plants or dairy farms,
coal mines, industrial plants and oil fields.
Eliminates the need for gas compression and prior siloxane removal
Runs equally well on 100% (1000 Btu/scf), 50% (500 Btu/scf), 15% (150 Btu/scf)
and 5% (50 Btu/scf) methane fuel.
Operates cleanly and efficiently with a wide range of fuels including fuels
with varying energy content.
Produces emissions (NOx, CO, VOCs) below 1ppm, significantly lower than
those from other power plants and flares.
Integrates two proven and mature technologies – gas turbine technology
with thermal oxidation – in a ground-breaking fashion.
Scales to match the available gas energy.
Low cost service.
T H E G R E E N E N E R G Y S O L U T I O N
17
The Flex Powerstation™ eliminatesthe complexity and expense offuel conditioning required by
traditional technologies.
HOW the Flex Powerstation™ WORKS
The Flex Powerstation™ is the only solution of pure
energy that works directly with a gas of low BTU.
Figure 1 shows a traditional gas turbine station:
In conventional technologies, compressed fuel is
injected into compressed air and combusted to raise
the temperature even further. This high-temperature
and high pressure fuel/air mixture spins the turbine at
high speeds to generate electricity. Each fuel is different
and therefore requires its own compressor, clean-up
and unique combustor. The siloxane removal and fuel
conditioning system is the weakest link in traditional
gas power plants. The fuel conditioning consumes up to
20% of the power generated. Such fuel conditioning and
siloxanes removal are substantially eliminated with the
Flex Powerstation™, as shown in Figure 2.
Figure 2 shows the operation of Flex Powerstation™
with its unique characteristics - of discrete box at the
bottom of the chart. Fuel is aspirated with air forming
a fuel/air mixture of 15 Btu / cft that is compressed.
The energy released is oxidized by the Flexidizer in a
gradual oxidizer. The high temperature and pressure
developed in the oxidizer is then used to spin the tur-
bine and generate electricity. The Flex Powerstation™
does not require a fuel compressor or fuel processing.
Regardless of the initial fuel Btu content, diluted with
air at 15 Btu / cft (1,5% methane, or 1.5% of the power of
natural gas).
figure 1
figure 2
THE CLEANEST COMBUSTION TECHNOLOGY AVAILABLE TODAY
T H E G R E E N E N E R G Y S O L U T I O N 18
The Flex Powerstation™ runs on the widest range of fuels down to as low as 5% methane while
delivering emissions that are almost undetectable.
Fuel Flexibilty
The Flex Powerstation™ efficiently operates on a wide variety of fuel sources,
including waste gas with as little as 5% methane.
Emissions
Flex Powerstation™ emissions are slated to meet the stringent California Air
Resources Board 2013 regulations for waste gas and are over 30 times lower than
the U.S. average for existing power plants.
The table below represents a comparison of emissions data between the
Flex Powerstation™, current emissions standards and future emissions stan-
dards. (Emissions Standards diagram. PPMV @15% O2.)
FLEXENER
GY POWER
STATION™
Over 300 million tons of man-relatedmethane seeps into the atmosphere each
year from locations around the world.
19
uniq
ue
solu
tion
Flexenergy Powerstation™ FP 250
the only solution for Inactive landfills that generate gases discharged freely into the atmosphere, polluting our environ-
ment for many decades. The environmental problem caused has now a unique solution.
The FlexEnergy Powerstation™ (FP), working on low caloric gases, is the only station that converts the problem into
efficient and profitable use. The FP 250 offers the sole holistic solution with no need of fuel conditioning. The FlexEnergy
Powerstation™, not only produce energy from otherwise useless gases, but also relieves the atmosphere of pollutants.
20
With the ability to run on ultra
low quality methane, the combi-
nation of micro-turbine and
thermo oxidiser technology
being installed at the closed
Santiago Canyon Landfill site
in California will be the biggest
landfill gas project delivered be
FlexEnergy so far.
T H E G R E E N E N E R G Y S O L U T I O N
THE CLEANEST COMBUSTION TECHNOLOGY AVAILABLE TODAY
PUBLIC BUILDING
The Phillip Burton Federal Building in San Francisco is the
largest federal building in the western US. Built in 1959 this
21-floor multi purpose federal facility has a 24/7 demand for
both electricity and heat. A study was completed to first cap-
ture and measure the facilities’ energy usage, then select the
technology to best fit the load profile and achieve the maximum
available energy savings. The Flex turbine MT250 gas turbine
was chosen. It provides round the clock power and heat thereby
reducing base load power consumption by 250 kW/ht and also
generates up to 1.100.000 Btu/hr of hot water for space heating.
Annual Energy profit $275.000
FACTORY
The Ethicon facility in Cornelia, Georgia - a Johnson & Johnson
Company- manufactures surgical and medical instruments. In
the process, Ethicon uses both heat and electrical energy on
a consistent 24X7X365 basis. The FlexEnergy Inc MT250 gas
turbine became an obvious choice as a consistent provider of
on site heat and electrical energy. They installed two MT250
gas turbines that deliver 2.200.000 Btu/hr as part of a modi-
fied exhaust system that feeds a steam boiler. The heat energy
generated by the gas turbines aids in the sterilization process
by reducing the amount of natural gas that the existing steam
boilers consume for regular operation.
Results: Boiler Savings: $ 150.000/year
Annual Energy Savings: $ 350.000/year
THE CLEANEST COMBUSTION TECHNOLOGY AVAILABLE TODAY
T H E G R E E N E N E R G Y S O L U T I O N 22
HOSPITAL
The John Muir Medical Center’s Walnut Creek campus is an
acute-care 324 bed facility that in 2007 began construction for
a Central Utility Plant expansion with a plan to increase energy
efficiency and reduce grid-purchased power. A feasibility study
was conducted to predict the facilities’ power and hot water
usage, then selected the technology that generates reliable out-
put to best fit the defined profile.
3 Flex Turbine MT250 configuration for a total of 750kW/hr won
the bid. To help fix cost and maximize uptime, hospital agreed to
a Total Care Service Agreement with FlexEnergy Inc for its low
maintenance gas turbine system.
Results: Boiler Savings: $ 200.000/year
Annual Energy Savings: $ 350.000/year
LABORATORY / OFFICE BUILDING
EMERYSTATION, EMERYVILLE, CA
Laboratory / office building
Wareham Development, a forward-looking real estate firl
based in San Francisco Bay Area, were seeking to offer their
tenants the unique benefit of low cost energy. Distributed
generation was chosen to produce the desired result. It limits
cost exposure to future rate increases and the thermal energy
generated from combustion can be used for space or process
heating for the EmeryStation facilities.
By installing 3 250kW Flex Turbine MT250s Wareham
Development benefits from secure power energy savings and
reduced energy cost volatility. The tenants benefit from ultra-
clean onsite, reliable power and an installation that is unobtru-
sive. All 3 units are natural gas fired.
Results: Annual Emissions: $ 200.000/year
Annual Energy Savings: $ 50.000 to 60.000/year in energy
23
Landfill gas to energy
Toland Road Landfill Ventura county CA
Ventura Regional Sanitation District wanted to take advantage
of all the landfill gas as it became available rather than waiting
5-10 years for the optimal flow required for a large scale
reciprocating engine. With installation of the FlexTurbine
system, Ventura County affirms its’ commitment to renewable
energy and environmental stewardship. The partnership with
Flex Energy will continue to pay dividents in future years as the
9 commissioned 250kW MT250 turbines will increase to 15 to
meet the full capacity of Toland Road Landfill.
Results: Annual Emissions: CARB certified for operation on
landfill.
Annual Energy Savings: $ 1.9MM/year in energy savings.
Renewable Portfolio Standard: 2,25 MW towards California’s
overall renewable energy goals.
THE CLEANEST COMBUSTION TECHNOLOGY AVAILABLE TODAY
T H E G R E E N E N E R G Y S O L U T I O N 24
What is the Flex Powerstation™ FP250?
The Flex Powerstation™ FP250 is simply the cleanest, most versatile pollution control and power generation solution in the world. The revo-lutionary Flex Powerstation FP250 oxidizes fuel gases, especially previously unusable fuel gases, to produce clean, green electricity.
The Flex Powerstation FP250 significantly expands the range of fuels that can be used to generate power. Unlike other current power plants that are available, the system operates cleanly and efficiently with a wide range of fuels, including landfill gas as low as 5% methane (50 Btu/scf). It is also atypical in that it accepts fuel gas near atmospheric pressure, so a gas compressor is not needed and it needs minimal fuel conditioning.
For landfills, why not just use a flare to destroy the methane?
A flare certainly destroys the methane, but cre-ates combustion-related pollution and provides no beneficial use. The Flex Powerstation™ FP250 destroys methane, has virtually zero emissions and generates electricity which creates revenue or savings to pay for the pollution clean-up and methane destruction.
What range of methane gas can the Flex Powerstation™ FP250 run on?
Unlike current market solutions, the Flex Power-station FP250 can operate on waste gases like methane in concentrations from 100% down to 5% methane.
How much power can a Flex Powerstation™ FP250 generate?
The Flex Powerstation generates 250 kW per system.
Is the Flex Powerstation™ FP250 scale-able?
Absolutely. The Flex’s modular design enables easy scaling based on the specific requirements of the site.
How much NOx (Nitrogen Oxide) emissions does the Flex Powerstation™ FP250 generate?
Less than 1 part per million (ppm).
How much CO (Carbon Monoxide) emissions does the Flex Powerstation™ FP250 generate?
Less than 1 part per million (ppm).
Where can the Flex Powerstation™ FP250 be used?
The Flex Powerstation FP250 can be utilized in Landfills (open and closed), Coal Mines, Digesters, Oil & Gas Operations, Waste Water Treatment Plants, Industrial Processing Plants and Waste Fuel Sites (military bases/ships, etc.), to name a few. New applications for the Flex Powerstation FP250 are discovered every day.
Does the Flex Powerstation™ FP250 have a combustion process?
No.
Does the Flex Powerstation™ FP250 require fuel conditioning and clean-up?
Many less than conventional technologies.
What is LFGTE?
Landfill Gas to Energy, using a potent green-house gas pollutant and waste product to create electricity.
How destructive is Methane gas for the environment?
According to the EPA, methane gas is 20-25 times more potent to the atmosphere than the green-house gas CO2.
How long does Landfill produce methane?
A landfill continues to emit methane gas for up to 100 years
Frequently Asked Questions _ FP250
25
What is the Flex Turbine™ MT250?
Gas turbine-powered generators represent the cleanest combustion technology available today. And the FlexEnergy Inc Flex Turbine™ MT250 leads the way with its on-site, clean, low emissions technology… the very best way to consume less and generate more. At the heart of this extra-ordinary equipment is a simple, powerful single-shaft design sharing a heritage with the legendary Dresser-Rand KG2 two-megawatt gas turbine that has proven to be one of the most reliable in its class. With typical FlexEnergy ruggedness and reliability, the 250 kW turbine has a product design life of 80,000 hours.
What types of methane gas can the Flex Turbine™ MT250 run on?
The FlexEnergy, 250 kW Flex Turbine™ can use pipeline natural gas and renewable “waste” fuels with a wide range of energy content, including landfill gases, digester gases, gases recovered from oil and gas processes and even gases that include significant hydrogen content.
Where can the Flex Turbine™ MT250 be used?
The Flex Turbine™ MT250 can be deployed at facilities such as Landfills, Wastewater treatment plants, Food processing facilities, Breweries, Agricultural waste handling facilities and Oil and Gas recovery facilities.
How much power can a Flex Turbine™ MT250 generate?
The Flex Turbine™ MT250 generates 250 kW per system.
What types of electrical generation can the Flex Turbine™ MT250 provide?
Grid parallel, dual-mode, or grid-isolated.
Is the Flex Turbine™ MT250 scale-able?
Definitely. The MT250’s modular design enables
easy scaling based on the specific requirements of the site.
How much NOx (Nitrogen Oxide) emissions does the Flex Turbine™ MT250 generate?
Less than 5 parts per million (ppm) @ 15% O2 at 100%* load (*natural pipeline gas only).
How much CO (Carbon Monoxide) emissions does the Flex Turbine™ MT250 generate?
Less than 5 parts per million (ppm) @ 15% O2 at 100%* load (*natural pipeline gas only).
Where can the Flex Turbine™ MT250 be used?
The Flex Turbine™ MT250 can be utilized in Landfills (open and closed), Coal Mines, Digesters, Oil & Gas Operations, Waste Water Treatment Plants, Industrial Processing Plants and Oil and Gas recovery facilities, to name a few.
Does the Flex Turbine™ MT250 feature inte-grated heat recovery?
Yes, the Flex Turbine™ MT250 offers built-in heat recovery integration with controllable output le-vels, the ability to reduce overall footprint, no need for ducting and is suitable for potable applications.
Is the Flex Turbine™ MT250 recuperator unique?
Yes, the Flex Turbine™ MT250 has a pa-tented recuperator that is critical to high efficiency and is considered the best in the industry.
Is the Flex Turbine™ MT250 combustor unique?
Yes, the Flex Turbine™ MT250 has a patented combustor that generates dry low NOx and easily meets stringent environmental regulations.
Frequently asked questions _ MT 250
26
SCIN AB ScandInvestor ABReg nr. SE.556811-1248
www.scin.se / [email protected]
EUR IBAN: SE77 6000 0000 0000 4500 1529
BIC: HANDSESS
SWEDEN Västra Finnbodavägen 2
131 31 Nacka
P.O.Box 2037,
132 02 Saltsjö-Boo
NETHERLANDS:Benoordenhoutseweg 13,
2596 BA Den Haag
P.O.Box 3, 2650 AA Berkel en Rodenrijs
Tel +31 70 314 24 16
Fax +31 10 713 15 63
GREECE:Athens dpt: Mavrogenos 13 Lofos Axiomatikon,
GR-121 36 Peristeri Attiki
Tel +30 697 285 66 22
Ioannina dpt: Gerakari str 7,
GR- 45 332 Ioannina,
Tel: +30 26510 21846,
Fax: +30 26510 21848
www.scin.se