1

Scientific ProgramACNDT2016 / IC-WNDT-MI’16

Friday, November25, 2016

15h00-19h30

Reception and Registration at Hotel EDEN PALACE Aïn-Turck Oran

20h00 Dinner

Saturday, November 26, 2016 08h00

Departure to Centre de Recherche en Anthropologie Sociale et Culturelle (C.R.A.S.C)

El-M Naouer - Technopôle de l’USTO, Bir El Djir, Oran

09h00-9h30 Opening Ceremony

Centre de Recherche en Anthropologie Sociale et Culturelle (CRASC)

09h30-11h45: 03 Plenary Sessions (Presidents: M. Zergoug, A. Badidi bouda, M. Farley)

9h30-10h10

Plenary Conference I

“Positrons as Non Destructive Characterization tool”

Pr. AOURAG Hafid

10h10-10h50 Plenary Conference II

“The importance of NDT and NDT Research”

Dr. Mike Farley (ICNDT PGP Chairman)

10h50-11h10 Coffee break

11h10-11h45

Plenary Conference III

“Enjeux de l’accréditation 17020,17024,17025 dans le CND”

Mr. Boudissa 11h45-13h00 Departure to Hotel EDEN PALACE 13h00-14h00 Lunch Break

14h00-16h00 Oral Session I

Room: 1 (ACNDT2016)

Room: 2 (IC-WNDT-MI’16)

16h00-16h30 Coffee break

Poster Session I/A

16h30-18h30 Oral Session II

Room: 1 (ACNDT2016)

Room: 2 (IC-WNDT-MI’16)

18h30-19h00 Poster Session I/B 20h00 Dinner

Sunday, November 27, 2016 08h30-10h10: 02 Plenary Sessions (Presidents: M. Farley, T. Boutekjirt)

8h30-9h 30

Plenary Conference I “Acoustic in NDT field”

Pr OSMANI

Universite de Valencienne

9h30-10h10 Plenary Conference II

“Certification of NDT and CM Personnel”

Dr. Mike Farley

10h10-10h40 Coffee break

Poster session II

10h45-12h50: 01 Plenary Sessions (Presidents: F. Herelli, M. Zergoug)

10h45-12h50 Panel discussion on Qualification of NDT Personnel’

Dr. Mike Farley (ICNDT PGP Chairman)

Dr. Harold Jansen ( AFNDT & SAIW)

2

Farid Herelli (AFNDT)

Cooperation IAEA- AFNDT

13h00-14h00 Lunch Break

14h00-16h00

Oral session III Room: 1 (ACNDT2016)

Room: 2 (IC-WNDT-MI’16)

16h00-16h30 Coffee break

Poster session III/A

16h30-18h30 Oral session IV

Room:1 (ACNDT2016)

Room: 2 (IC-WNDT-MI'16)

18h30-19h00 Poster session III/B

20h00 Dinner

Monday, November 28, 2016 08h30-10h10: 02 Plenary Sessions (Presidents: S. Lebaili, Y. Benkheda)

08h30-09h30

Plenary Conference I

“Diamond Tool Wear in Diamond

Turning of Rapidly Solidified Optical

Aluminium”

Pr. Khaled Abou-El-Hossein 8

h45-12

h30

Meeting of the ICNDT Policy and

General Purposes Committee

( Room: 2)

09h30-10h10

Plenary Conference II

“On the JMAK kinetics of phase

transformations in metals”

Pr. M. BOUABDELLAH

10h10-10h40 Coffee break

Poster session IV

10h45-12h30 Oral session V

Room: 1 (IC-WNDT-MI’16)

12h30-13h00 Closing Ceremony

3

Oral Sessions

November 26, 2016

Oral Session I

Room 1 (ACNDT2016): Ultrasonic NDT Methods (Presidents: R. Drai, M. Osmani)

14h00-16h00

Weld Defects Recognition and Classification using Ultrasonic Signals

Naima MEZHOUD,Fairouez BETTAYEB, Yacine AMARA, Abdenour LABED

Measurement of thickness of thin metal sheets by the A0 Lamb mode at low products

frequency thickness

S. Sait, F. Boubenider

The technique enabling measurement of the dispersion influence of the phase velocity of

Lamb wave signals propagating in the higer dispersion zone

L. Draudvilienè, H. Ait Aider

Non-destructive testing of concrete cover using spectral analysis of ultrasonic surface waves

Morad GRIMES, Zoubir Mehdi SBARTAΪ, Nabil YACEF

The defaults geometry influences's on the propagation of the guided waves Numerical study

with finite elements method

Nadia HARHAD, Soumia CHAIEB EDRAA

Increased your Asset integrity using the latest UT, non-intrusive corrosion monitoring

Technologies

Thaer Alkhouri

Ultrasonic TOFD Technique for Cracks Sizing and Locating Based on PSO

Yacef Nabil, Bouden Toufik, Grimes Morad

THEORETICAL AND NUMERICAL STUDY OF THE REFLECTION OF AN

ULTRASONIC PULSE RADIATED BY A LINEAR PHASED ARRAY TRANSDUCER

AT A FLUID-FLUID INTERFACE

A. Oudina, H. Djelouah

Ultrasonic attenuation in trabecular bone: Theoretical approach and experimental

measurement

Bennamane Abderrazek, Boutkedjirt Tarek

Room 2 (IC-WNDT-MI’16): Theme 1Welding, welding metallurgy, simulation of process, residual

stresses in welding, electric Arc, plasma…etc. (Presidents: R. Badji, S. Frappart)

14h00-16h00

Evaluation of the Corrosion Behaviour of Friction Stir Welded High Yield Strength Steels by

Scanning Electrochemical Microscopy

Simon FRAPPART, Loic Grégoire, Philippe Missoffe

Experimental study of metal transfer of CMT welding

Bachir MEZRAG, Ismail BOURI, Frédéric DESCHAUX BEAUME, Mustapha

BENACHOUR

Joining of polymer-metal lightweight structures using self-piercing riveting technique:

context of study, numerical approach and preliminary results

Elias AMRO, Afia KOUADRI-HENNI, Vigen ARAKELIAN

Effect of resistance spot welding parameters on mechancial behavior of thin sheet

BENACHOUR Mustapha, LARBI CHERIF Mohamed

Numerical modelling of hybrid laser friction stir welding of aluminum alloy

Oussama Mimouni, Mohamed Hadji, Nabil Chekroun, Riad Badji, Afia Kouadri-David,

M’hamed djelloul abbou

A comparative study between pulsed and unpulsed Ti-6Al-4V alloy TIG welds

B. Mehdi, R. Badji, L. Rabahi, N. Kherrouba, V. Ji, B. Alili, D. Bradai, F.D. Beaume

SEM/ DRX / EBSD charaterization of electric submerged arc welded of an industrial low

carbon steel

Semcheddine DERFOUF Amria BOURAS, Nourdine BELGHAR

16h00-16h30 Coffee break

4

Oral Session II

Room 1 (ACNDT2016): NDT for Material Characterisation (Presidents: K. Cain, M. H. Alaalam)

16h30-18h30

Thermography for. Face Recognition Application

Z. Mentouri, M. Zergoug, S. Ziani, H. Bourouba, A. Moussaoui

The finite element method and the Infrared Thermography principle applied to the control of

homogeneity between a weld and the structure to weld

Sougrati Belattar

Acoustic Emission Monitoring of high risk installation in industrial environment

Hamid HAFID, Alain PROUST, Richard DUNOYER, Omar AL HAJ

The Effect of Laser Treatment on the Erosion Resistance of a CU copper -NI Austempered

Ductile Iron

Mohamed H. Alaalam, Abdussalam M. Drah

Crystallization kinetics phenomena assessment in a glass-ceramic material, by non-

destructive spectroscopic methods

D. Moudir, N.Kamel, A . Benmounah, A.Djeridi, A.Sari, Y. Mouheb, S.Kamariz,

F.Aouchiche

Study of the effect of ɣ-ray irradiation on the optical properties of polyethylene terephthalate

polymer

K. Chikaoui, M. Djebara, R. Yefsah, M, Siad, M. Abdesselam

Magneto-electriqueand magnetic studies of the Sr-doped Samarium manganite synthsesed by

citrate gelmethod

E. Lakhal, A. Amira, R.Chihoub, S. P. Altintas, A. Varilci, C. Terzioglu

Room 2 (IC-WNDT-MI’16): Theme 2 Metallic materials Elaboration, forming, phase

transformations, simulation, mechanical behavior (Presidents: Y. Benkeedda, K. Abou-El-Hossein)

16h30-18h30

Effect of cold rolling on texture evolution during primary recrystallization of an IF steel

M. Ramoul, A. Ayad, N. Rouag

Experimental study of shot peening effect on the surface of austenitic stainless steels:

roughness, residual stresses and work hardening

Mohamed Chaib, Mohamed Belhamiani, Abdelkader Megueni, Abdelkader Ziadi, F. Javier

Belzunce

Influence of sintering temperature on the densification of copper matrix composite

reinforced with CoAl particle developed by SHS

K. KHELOUI, S. AZEM, M. NECHICHE

First principles study of the new half-metallic ferromagnetic full-Heusler

alloysCo2CrSi1_xGex: An ab-initio study

I. Asfour,D. Rached

Numerical analysis of Hydrogen embrittlement of CrMo and CrMoV steels using Monte

Carlo method

Soumia Ourrad, Youcef Houmadi, Abdelkader Ziadi, F. Javier Belzunce

5

November 27, 2016 Oral Session III

Room 1 (ACNDT2016):Electromagnetic NDT Methods(Presidents: H. Jansen, A. Benson)

14h00-16h00

Non intrusive stochastic finite elements method applied for non destructives NDT problems

Azouaou Berkache, Zehor Oudni, Hassane Mohellebi, Taib Brahimi Abdelhalim

Fast Finite Element Computation for 3D Eddy Current Testing Problems with T-Ω

Formulation

M. Hamel, H. Mohellebi, F. Hocini

3D Phase Measurement : get your accurate 3 dimensional surface scans and measurement

while simplifying your inspection process

Hafees Faisada

Harmonized system for the training, qualification and certification of personnel,

implemented within the French Confederation for NDT (COFREND)

André CHARBONNIER

Stress and temperature effects study on anhysteretic curves behavior of magnetostrictive

materials

TAMAZIRT Souad, MOHELLEBI Hassane

Reconstitution of complex defects with the method of neural networ: Application for the

nondestructive evaluation

A. Harouz, H. Mohellebi, M. Hamel

DO PERMANENT MAGNETS WORK?

Keith Cain, Marius Purcell

Study of the Effet of the Geometry Shape of defect on the Reliability of NDT Device

Z. Oudni, H. Mohellebi

Room 2 (IC-WNDT-MI’16): Theme 3 Composite and ceramic materials (Presidents: M. Azzaz, M.

Bouabdellah )

14h00-16h00

Study of the repair of the pipes damaged by patch in composites

AZZOUZ Achewek

Reliability-simulation of composite tubular structure by finites elements method–Mechanical

loading

A. Maizia, A. Hocine, A. Ghouaoula, D. Chapelle, H. Dehmous

Structural and electrical Properties of the ceramic manganite Pr0.6Sr0.4Mn1-x CuxO3

R.Chihoub, A. Amira, E. Lekhal, A. Varilci, S.P. Altintas, C. Terzioglu

Elaboration and Characterization of PbS nanorods trapped in Y zeolite

H. Tebani, N. Keghouche

Comparison of IR Spectra of Five Porcelain Compositions Prepared Using Algerian Raw

Materials

S.Kitouni, A.Harabi

Contribution à l’étude du comportement du composite verre/polypropylène par la technique

de nano-indentation instrumentée

A. Mokhtari, N. Tala Ighil, A.Brick Chaouche, K. Bettahar

A new and economic approach to synthesize and fabricate anorthite based ceramics using

kaolin and CaCO3

S. Zaiou, I. Serradj, A. Harabi

The effect of Sintering condition on the microstructure and Electrical Conductivity of

Apatite- type La9.33(SiO4)6O2 ceramic

A. Saoudel, N. Azzouz, S. Boulfrad and J. T. Sirr Irvine

Modeling and optimization of the composite plates laminated by genetic algorithm

SAFER M, Belkheir F

16h00-16h30Coffee break

6

Oral Session IV

Room 1 (ACNDT2016):New NDT Tools(Presidents: K. Cain, A. Benammar)

16h30-18h30

Computed radiography : Application and benefits for profile inspection

Haitham Ibrahim

Investigating applicability of discontinuous Galerkin methods towards structural health

monitoring in transportation

Salah-Eddine HEBAZ,FaroukBENMEDDOUR, Emmanuel MOULIN, Jamal ASSAAD

A comparison of tow powerful optimization method, genetic algorithm and practical swarm

optimization for the design of waveguide filters

I. Bouchachi, I. Messaoudene, M. Boudjerda, A. Reddaf, K. Ferroudji, M.L. Riabi

Multistep Relaxations in a Spin-Crossover Lattice with Defect: a Spatiotemporal Study of

the Domain Propagation

Rachid Traiche, Hassane Oubouchou, Jorge Linares, Mourad Zergoug and Kamel

Boukheddaden

Temperature Effects on Thin film Based SPR-Sensor

S. Benaziez, Z. Dibi, N. Benaziez, B. Abdelhadi

Radiographic Weld Images Denoising Using Wavelet-Based Technique

Fatma Zohra BOUDANI, Nafaa NACEREDDINE

Testing the setting and hardening of concrete using the prism technique

F. Kemihaa, A. Bouhadjerab, M. Grimes, T. Benkedidah

Monitoring of cracking in reinforced concrete beam by using Digital Image Correlation

(DIC) and Acoustic Emission (AE)

A. BELBACHIR, S.Y. ALAM, M. MATALLAH, A. LOUKILI

Room 2 (IC-WNDT-MI’16): Theme 4Corrosion and materials protection, pitting corrosion,

stress corrosion, coating, thin films, …etc. (Presidents: T. Chouchane, H. Meradi)

16h30-18h30

Improvement in Nano-hardness and Corrosion Resistance of XC48 samples by plasma

immersion ion implantation

M. M. ALIM, N. SAOULA, R. TADJINE, F. HADJ-LARBI, A. KEFFOUS and M.

KECHOUANE

SURFACE CONDITIONS EFFECT ON THE CORROSION BEHAVIOUR OF STEEL

REBAR IN SIMULATED CONCRETE PORE SOLUTION

Somia BELKHIR, Hakim BENSABRA, Noureddine AZZOUZ, Agnieszka FRANCZAK,

Omar ABOUBI, Jean Paul Chopart

DURABILITY OF CONCRETE UNDER THE INFLUENCE OF SULPHATES ATTACK

IN THE REGION OF OUARGLA – ALGERIA

Mohammed-AminBOUMEHRAZ,MELLAS Mekki

The inhibition effect of Gum Arabic (GA) On the corrosion of carbon steel in H2SO4

medium

Hicham TAOUI, Ahmed LOUAFI, Hamza Bentrah, AbdelouahadChala

NUCLEATION AND FORMATION OF OXIDE FILM UNDER A MAGNETIC FIELD

M. Amirat, A. Beloufa and A. Dekkiche

Structural, Morphological and Optical Properties of Zn(1−x)CdxO thin films by spray

pyrolysis method

A. SERRAR, K. BOUZID, A. ABDELHAK, A. ROUSTILA

Identification of Fe-Al intermetallic phases in aluminide coatings on mild steel

Sabrina Mendil, Kamel Taïbi, Said Azem

Effect of some experimental conditions on the electroplated Mn-Bi film composition

S. Boudinar, N.Benbrahim, B.Benfedda, A.Kadri, E.Chainet

7

November 28, 2016 Oral Session V

Room 1 (IC-WNDT-MI’16): Theme 4Corrosion and materials protection, pitting corrosion,

stress corrosion, coating, thin films, …etc. (Presidents: T. Chouchene, A. Haddad, H. Meradi)

10h45-12h30

A comparative study of potentiostatic and pulsed Electrodeposition of ZnS nanostructures

K.GHEZALI, L.MENTAR, B. BOUDINE, A.AZIZI

Evolution of texture and residual stresses with the thickness for AlN films deposited by

dcMS on Si (100)

B. Riah, A. Ayad, J. Camus, M.A. Djouadi, N. Rouag

The influence of annealing temperature and mercury doping (Hg) on nanostructures thin

films of TiO2 obtained by sol-gel method

F. Abbas, R. Bensaha

Influence of oxygen fraction on the deposition of Al2O3 thin film onto the steel by

magnetron sputtering

A. Hammouche,N. Saoula, N. Madaoui, L. Zougar, D. Dergham, L. Bait

Copper Oxide Thin Films Deposited by Radiofrequency Magnetron Sputtering: Photovoltaic

Applications

R. Tadjine, A. Haouimi, M.M. Alim, M. Kechouane

Elaboration et caractérisation morphologique et mécanique des couches minces deZrN

déposées par ablation laser

I. GHEMRAS, S. ABDELLI-MESSACI, M. IZERROUKEN, K.YAHIAOUI,

S.LADJOUZI, M.BOUAKIL

Properties of thin films Cr-N, Cr-Mo-N, Ti-Al and Ti-Al-N, prepared by PVD

H. Berkane, L. Chekour, Y. Benlatreche, I. Rahil

First principle investigation of structural, electronic and optical properties of Er-doped (ZB)

ZnO using modified Becke-Johnson exchange potential

E. A. Alkahtani, A. E. Merad, M. R. Boufatah, A. Benosman

8

Poster Sessions (Hall)

November 26, 2016

14h00-16h00

Poster session I/ A (ACNDT 2016)

Code Author Title

001 B. Smili Studies of temperature-dependent behavior and crystallization of metallic glass

alloys determined by a new device «NDT» for simultaneous measurements of

electronic transport

003 Djebbara

Benzerga

Behavior and damage of welded structures withdefects : Application to pipeline

007 Daheche Bilal Flare Test, an application on the welded steel tubes, study with simulation

010 F. Moumen Comparative Numerical Simulation of blood flow in the cases of left sub-

clavian artery sténosis and aortic coarctation

020 Abderrahim

HADJ LARBI

THE VARIATION OF THE GAP WITH HYDROSTATIC PRESSURE OF

THE FLUOROPERVSKITE RbZnF3 COMPOUND

026 CH. Erredir Teaching Learning Based Optimization Neural Networks for Waveguide Filter

Modeling

028 MOHAMED

MOKHTARI

Electrical characterization of the contact between the composite grains by

dielectric spectroscopy

035 SAFER Omar

Adib

Eddy-current non-destructive testing system using a magnetic sensor based on

GMR

039 S. Triaa Electromagnetic and Hyperfrequency Conductivity of Polymar and Iron based

Nanocomposites

040 Merzouk HALIT SPIN CROSSOVER MATERIALS BASED ON FUNCTIONALIZED

MACROCYCLE LIGANDS

042 Bouchra Abou El

Anouar

A comparative experimental study of ultrasound technique and vibration

analysis in detection of bearing defect

062 M.H.TEDJINI A first-principles study of the physical properties of of CdX (S, Se,Te)

compounds materials for using in radiation and optical applications

065 CH. Erredir Swarm Optimization Algorithm Inspired in the Behavior of the Social-Spider

for Microwave Filters Optimization

066 A. Hedir Dielectric Characterization of Thermally Aged XLPE Used as High Voltage

Cable Insulation

077 Kaddour Gherfi Edge detection in an infrared image in steel and metallurgical domain

089 OKBA Fouad Characterization of micro cracks growth generated by Ion Co-Implantation

093 Hamid

Boutoutaou

Modeling and Simulation of the Defect Form Effect on Mechanical Behaviour

of Shrink-Fit Assemblies

102 Yassine Adjal Theoretical investigation of damage detection in composite structures using

harmonic response technique

107 I. Messaoudene Rectangular Dielectric Resonator Antenna with Stacked BaxSr1-xTiO3 Ceramic

film

129 O. Boudrifa SRUCTURAL, MECHANICAL ,ELECTRONIC, ELASTIC, AND

CHEMICAL BONDING PROPERTIES OF HYDRIDES Sr2RuH6: AN AB

INITIO STUDY

130 Yahia lahssene

Yamina

Driver's drowsiness detection by vision

131 F. Khathyri Non destructive testing of different structure of composite with infrared

thermography and ultrasonics

140 Mohammed Ouali Numerical Damage Localization in Beam like Structures by using Modal Strain

Energy Ratio Based Method

141 MESSAOUDI

Rahma

Test of multilayer concrete structures by ultrasound

150 L.Boukerdja Status of Neutron Tomography at the Nuclear Research Centre of Birine:

Principles and facility characteristics

151 Abraham O. NON-DESTRUCTIVE EVALUATION OF BURNT BRIDGE AT CH. 57+450

9

OLANIYI ALONG ABUJA-ABAJI-LOKOJA ROAD, NIGERIA

164 AZIEZ SIHAM Numerical simulations of the propagation of Chirped Vector Soliton in optical

fibers with variable coefficients in the presence of third order dispersion and

power law nonlinearity

167 Fairouz Bettayeb Is the occurrence of an attractor in a multi-scale Ndt computer based data

analysis a good indicator of Chaos theory data modeling?

184 S. Ahmed Influence of temperature on polarization and depolarization current in XLPE

insulated cable subjected to the DC electric aging

Poster session I/ B (ACNDT 2016)

187 T. Ounnoughi Surface potential distribution on PVC samples charged by corona discharge

193 S. Laddada Time of Flight (TOF) Estimation of Overlapping Ultrasonic Signals Using

Wavelet Transforms

198 L. YOUNES Study of residual stresses of identation in the glass

219 Sonya REDJALA UV radiations impact on the mechanical and physicochemical properties of

polycarbonate

225 Issam Attoui Rolling Bearing Fault Diagnosis using SVM, Frequency Kurtosis and Entropy

Techniques

227 S. Megherfi Study of propagation comportment of partial discharge pulses in transmission

electric power cable 18/30 kV subjected to the electric aging DC voltage 60 kV

230 H. Bouhani

benziane

Electronic and magnetic properties of Ba2CoWO6: First principal investigation

233 BOUAMAMA

Mohamed

vibrations of sandwich beams FGM

236 S. LEMLIKCHI Estimating overlapped backscattered echoes from thermal sprayed coating using

the maximum likelihood approach

241 Belaribi Hassiba RELATION ENTRE LA RESISTANCE A LA COMPRESSION ET UPV DU

BETON AVEC DES FIBRES EXPOSEE A DES TEMPERATURES

ELEVEES

242 Belaribi Hassiba Prediction of compressive strength of Concrete with steel fibers exposed to high

temperatures by artificial neural networks

243 BEDOUD

Khouloud

Gas Sensors Elaboration Based to SnO2 and ZnO: application to the detection

of CO, CO2 & NH3

250 Rezaiguia

Mansouria

Study of the structural, electronic and magnétique proprieties of PrCoO3

260 O. Benaouda Comparative Performance Study between DTC_C and DTNC Multi-level

Inverter Fed DSIM

261 H. Berrached Bayesian Inference for Image Reconstruction in X-Ray Tomography

267 S. AOUABDI Using Multivariate Statistics & Multi-Scale Entropy to Monitor Gears

Degradation and Signal Denoising Strategy using Wavelet Decomposition

270 N. Harb Defects dispersion studies in composite structures has polymer matrix

282 ABER Chifaa Innovative Eddy Current Probes Characterization Of Micro Defects

284 Z. Guezoui Conception et Optimisation d’une Antenne Patch Rectangulaire pour les Tests

Non Destructifs (CND)

285 BENYAHIA

Ahmed

Human Liver Tissue Characterization Using Backscattered Ultrasound Signals

Mean Scatterer Spacing

288 Rabah

ABDELKADER

Condition Monitoring and Fault Diagnosis of Bearing Using Hybrid Method

Based on EEMD and Minimum Entropy Deconvolution

297 M. S. Hamache Magnetic Flux Leakage Analysis Around Pipeleine Defect Using Finite

Elements Method

304 R. RACHIDI Non-destructive testing of adhesion defects in Ni-WC coating by focused

ultrasound method using a phased array probe

314 Nikhil

Gopalkrishnan

Assessment of fire affected concrete structure by NDT- A Case Study

315 S. Benalia Contribution of the comprehension of nanostructured (Fe65Co35) and

(Fe65Co35)90Cr10 some structural and magnetic properties

10

331 L. CHERRAD Application of Diagonally Relaxed Orthogonal Projections (DROP)- conjugate

gradient and Kaczmarz method for X Rays reconstruction image

336 Melzi Nesrine Influence of induced phenomena during a dressing operation of a turning

process

339 Merazi Sayah Contribution to the minimization of vibration of rotating machines

341 Faiza Mekhalfa Weld Defect Classification in Industrial Radiography through Hu and Zernike

Moments

November 27, 2016

10h10-10h40

Poster session II (IC-WNDT-MI’16)

Theme 1 / Theme2

Theme 1 Welding, welding metallurgy, simulation of process, residual stresses in welding, electric Arc,

plasma…etc.

Code Author Title

038 L. KABA Etude de soudage TIG d’un alliage d’aluminium 2219 appliqué dans l’aérospatial

142 Tahar Madani Thermal analysis of friction stir welding on AA6061 aluminium alloy using

COMSOL

171 A. Deliou Fatigue behavior of welded joints in X70

175 Habib Lebbal Experimental study of shot peened and not peened similar resistance spot welds of

ferritic and austenitic stainless steels: residual stresses and mechanical properties

208 Khatir

Mohamed

Impact of the heat treatments on the microstructure of the aluminum alloys 7075

T6 welded by the friction stir welding process

248 Mouloud

AISSANI

Numerical modelling of an aluminium alloy welded by a TIG process and

experimental validation

253 Kaid Mustapha Comparaison entre le soudage FSW et le soudage Bout a Bout pour le

polyéthylène à haute densité (PEHD)

258 S. Benharat Behaviour of the electric arc for different times and for different values of welding

currents

272 A. KELLAI L'effet du traitement thermique et le métal d’apport sur le comportement structural

et mécanique d’une soudure en acier inoxydable duplex

276 Youcef-Amine

MASMOUDI

Heat source modeling of keyhole Laser welding process: Models analysis

281 A. Kouadri-

Henni

Simulation and calculation of residual stresses of magnesium AZ91-D alloy

welded by laser beam process

287 Saad Chaouch Multi-Function Converter Digital-control implemented by dSPACE and Arduino

boards: Application to arc welding power source

307 L. Rabahi Morphology and Mechanical properties of α grain boundary during TIG welding

process

321 H. Nezzari Determination of residual stress by X-ray diffraction in a weld cordon

334 L. Belgacem Welding assembly of thin plates of 7075 T6 aluminium alloy

Theme 2 Metallic materials Elaboration, forming, phase transformations, simulation, mechanical

behavior

Code Author Title

002 Y. ZIDI Structural and magnetic properties of TbMnSi and LaMnSi compounds in CeFeSi-

type

005 Meriem KAB Study of intermetallic compounds of X182CrN11-1 steel hot dipped into molten

aluminium

022 M. Beldi Characterization of nanostructures Ti80Ni20 powder mixtures elaborated by

mechanical alloying

029 A.Djeridi Phase transition phenomena in an iron phosphate glass and thermal stability

criteria

034 Abderrahmane Bending of laminated beams using Timoshenko model via nonlocal elasticity

11

Besseghier

036 A.Boulegane Study the structural, electronic and elastic properties of CuS and CuTe using FP-

LMTO method

037 M. Mehenni Analytical Characterization of Nd2Fe14B sintered magnet

044 A. Boulassel Elaboration of Metallic oxide nanopowder Fe doped ZnO

067 Fatima Zohra

Lemmadi

Effect of ageing on structural, microstructural and mechanical properties of Al-

Mg-Si alloy

068 IMENE

LAMIRI

STUDY OF THE RELATIONSHIPE BETWEEN THE NEW REACTION AT

LOW TEMPERATURE IN Au-Ag-Cu SYSTEM AND THE COPPER RATE

072 Boura

Mohammed

Impact resolution methods of contact on the mechanical behavior of structures

076 M.Bendoumia Study of the structural evolution of Ni50%at Al50%at mixture during mechanical

alloying

083 L. FAGHI Synthesis and characterization of nanocristalline Fe53%Si28%B19% Alloy

prepared by high energy ball mill

086 H. Bouhabila INFLUENCE OF ROUGHNESS ON FRICTION AND WEAR CONTACT PiN-

CYLINDER: STEEL-STEEL

114 K.SLIMANI Simulation of the propagation of cracking by finite element code calculation of a

supermartensitic stainless steel pipe

124 D.Lamrous Effect of Magnesium addition on the microstructure of Al-Zn-Mg alloys

125 H. Fiad Study of nickel silicide by X- ray diffraction

128 S. Bourahla Heat treatment effect on structure evolution of Al-Li 8090 Alloys

134 Mohamed

Tourab

Effect of roller burnishing parameters on roughness surface and hardness of steel

S355J0 specimens by using response surface methodology

135 Sofiane

Abdelhadi

STRUCTURAL, ELECTRONIC AND OPTICAL OF Zn1-xMgxTe

138 A. Ouchtati Behaviour of dislocations near phase boundaries in the anisotropic linear elasticity

theory

143 R.

BENCHOUIEB

EFFECT OF MULTI-PASS HOT ROLLING ON RECRYSTALLISATION

BEHAVIOUR OF FERRITIC STAINLESS STEEL TYPE 409

156 R. Bellili Study Ni70Al20Si10 prepared by mechanical alloying

159 Katia

HAMMAR

Effects of the stacking fault on free surface FePt L10

185 Abdedaïm

Yassamine

Improvement of the Mechanical Properties of the Steel 16NC6 by Cementation

189 T. Chabi Structural and magnetic properties of Fe77Nb8B15 alloy prepared by mechanical

alloying

194 SETTAR Nacer

Eddine

Expertise on the wear of a oil drilling tool head steel and physicochemical

characterization of multi-materials (steel / tie layer/ hardfacing / brazing)

196 I. Hamdi The effect of the artificial aging on the precipitation kinetic in the Al-Mg-Si alloy

199 A. Saoudel The effect of addition by TlF3 on structure and electrical properties of (Bi,Pb)-2223

phase

204 M.D. Hadid Effect Of Precipitation Processes In Aluminum Alloy 6101 T1 Used In The

Electric Transmission Lines

212 E.

KHENNOUS

Simulation of a quantum-well structure based on BInGaAs/GaAs for laser’s

applications

220 TAHI Sid

Ahmed Lamine

Numerical simulation of mechanical behavior of the metal foam with open and

closed cells

223 Ibrahim

ZIDANE

Characterization of the rheological and tribological behaviors from the micro-

scratch test for steel C45

228 M. Beldjehem XRD analysis and thermal properties of nanocrystalline Fe50Co40Ni10 alloys

229 B. HAMADI Determining the effect of cutting parameters on surface roughness in turning using

the Response Surface Methodology

237 O. Djema Effect of Ag addition and artificial aging temperature on the precipitation kinetic

of β’’ phase in 6063 aluminum alloys

240 Adel SAOUDI Modelling of the relationship between mechanical properties in API X70 steels

12

245 S. ACHOURI EFFECT OF DIVISIBILITY OF THE PROBABILITY OF FAILURE OF THE

MODEL OF WEIBULL PARAMETERS DURING THE SIMULATION OF

PULLING A CAST IRON

293 HARHOUT R Amélioration des caractéristiques mécaniques des surfaces par nitruration procédé

technologique du plasma à froid

340 Ibtissem Slatni Conversion du Kaolin en matériaux nanostructurés et application dans le

traitement des effluents textiles

16h00-16h30

Poster session III /A (IC-WNDT-MI’16)

Theme 3 / Theme4

Theme 3 Composite and ceramic materials

Code Author Title

004 W. REZIG Characterization and Improved Solar Light Activity of TiO2 doped Ferric

Oxide/Diatomite Hybrid Catalysts

004 W. REZIG Preparation of Modified Asphalt Benders with Different Contents of Diatomite

019 A. Malki Thermal evolution of gibbsite Al(OH)3

021 D. Belfennache STUDY AND ELABORATION OF SILVER NANOPARTICLES SUPPORTED

ON TITANIUM OXIDE

047 Ouahiba

Meziane

Effect of catalyst on Thermal properties of PC/PET blends

048 A.

BENSEDIRA

Synthesis and characterization of polyaniline doped with different doping agents

059 Souad Kasrani The effect of TiO2 additions on mechanical properties of the porcelain prepared

from Algerian raw materials

069 Nadjat

CHELGHOUM

Thermal, rheological and morphological properties of biodegradable blends based

on poly(lactic acid) and polycarbonate blends

070 Ahmed Hamidi A Three-Dimensional Solution for Bending Analysis of Functionally Graded

Ceramic–Metal Sandwich Plates with Stretching Effect

079 Dehchar Charif Two-step electrosynthesis of copper nanoparticles-polypyrrole composite

films on ITO substrate 083 F. SIAHMED Thermal and mechanical properties of bio-composites unsaturated polyester

reinforced by Luffa cylindrical

084 CHABOUR

ABDELALI

Kinetics study of Oxidation UO2 pellets at High Temperature, Processing and

Characterization

088 R. Bennai Analysis of Free Vibration of Sandwich Beams Consider Normal Deformation

Effect

092 Merabet Safia Effet du traitement Thermique (Trempe libre )sur les proprietes thermiques et

thermo-dynamique du polypropylene(PP)

100 AYADI

AICHA

ELASTIC INTERACTION BETWEEN DISLOCATION AND INTERFACE IN

ELASTICALLY ANISOTROPIC BIMATERIALS: Al2O3-X

101 MADI Wafa EXPERIMENTAL ASSESSMENT OF THE BEHAVIOR OF RECTANGULAR

TUBULAR COLUMNS (RHS) FILLED WITH CONCRETE

110 A.Khiat Elaboration and characterization of a piezoelectric ceramic resonator

120 N.Douas Elaboration and study of Ni/SiO2, Co/SiO2 and Ni-Co/ SiO2 nanocomposites

supported on silica

153 C. Rocandio Fatigue behavior in Mixed Mode I/II of carbon-epoxy composites

154 L. Belgacem Experimental Analysis Of Mechanical Behavior Of Hybrid Composite Laminate

Manufacturing By Vacuum Molding

158 I. Serradj Characterization of porcelain composition using raw materials Algerian

160 Belkheir F OPTIMIZATION OF THE BEHAVIOR OF BUCKLING OF THE

STRATIFIEES BY GENETIC ALGORITHM

13

162 S. Ouyahia Synthesis and characterization of Cu1+x SixFe2-2xO4 spinnel ferrites produced by

the ceramic technique

168 HOUDA

Amina

THE EXPERIMENTAL BEHAVIOUR OF SLABS STRENGTHENED BY

COMPOSITE FIBRE REINFORCED POLYMER (CFRP)

171 A. Deliou Failure of symmetric composite laminates with various reinforcement

arrangements

182 W. Oudad Analysis of Hybrid Repaire Technique (Bonded Patch And Drilling) of Metallic

Aircraft Structures

183 D. Belhadri Nonlinear Behavior of Cracked Pipeline API X65 Repaired with Composite

Materials Under Pressure Load

186 Nassima Djebri PHYSICO-CHEMICAL ANALYSIS OF COMPOSITE MATERIALS

(ALGINATE-BENTONITE-ACTIVATED CARBON)

200 Daikh Ahmed

Amine

Thermal behavior of Functionally Graded Materials

202 Ali Benouis FE ANALYSIS OF THE BEHAVIOUR CRACK INTERACTION IN THE

BONE CEMENT OF THE FEMUR THP

Poster session III /B (IC-WNDT-MI’16)

203 Yasmina

Kissoum

Synthesis and characterization of TiO2 nanoparticles by ball milling process: the

influence of process time on the structural, optical, and morphological propreties

215 RAHMANI

MOHAMED

Vegard's Law in the Si1-yCy alloys

216 E. Britel Modélisation et Simulation Numérique des Engrenages Plastiques (PVC, PA) à

Denture Hélicoïdale sous un Environnement C.A.O "Application du Logiciel

SolidWorks 2013+ Comsol 4.4"

217 Hamza

Bouguessir

Mechanical Charcterization of a new hybrid Jute/Glass reinforced laminates

Experimental comparative study

221 H.I. Beloufa The effects of laminated composite patch with different stacking sequences on

bonded repair

226 FERHAT

Djawad

Elaborationand Characterization of Nano -Bio- Composite Membranes

235 Soumia

Sekkiou

Thermo-mechanical beahvior of steel-concrete composite columns under natural

fire including heating and cooling phases

246 S. Chaib Influence of mixing sequences on the characteristics of fresh self-compacting

concrete reinforced with metal fibers

247 H. Kouadri Structural characterisation and antibacterial activity of PP/HDPE/TiO2-clay

nanocomposites prepared by reactive extrusion

252 Samira Hassiba

Tagrara

On bending and buckling functionally graded carbon nanotube-reinforced

composite beams

278 N.

BOUSALEM

GREEN SYNTHESIS, CHARACTERIZATION AND ANTIBACTERIAL

ACTIVITY OF ALGINATE-Ag NANOPARTICLES-CHITOSAN COMPOSITE

FILMS

292 N. BOUZEGZI Microstructural and tribological characterizations of a Hard material composite:

WC-W-Mn-Ni/Cu-Sn/assembled with cermet (WC-Co) by brazing process

300 Ali Mameri CHARCTERISATION MICROSTRUCTURAL AND MECHANICAL OF

Ni/NiAl2O4, DEVELOPED BY MECHANICAL ALLOYING AND REACTIVE

SINTERING

305 Z. Zeddour The optimization of the gap between fibers to estimate damage of the composite

interface

310 S. DEBILI THE EFFECT OF THE ELECTRICAL FIELD AND THE POLARIZATION

TEMPRRATURE ON PIEZOELECTRIC PROPRIETES IN THE POLY

(VINYLIDENE FLUORIDE) (PVDF)

330 Fares

Djematene

Elaboration and Tribological study of WC-35 wt%(Fe-Co-NI)hard metal alloys

obtained by liquid phase sintering

335 S. Menassel Investigation of Structural and Superconducting Properties of BiSrCa(Ti)CuO

Superconducting Ceramics from Sol-Gel Method

Theme 4 Corrosion and materials protection, pitting corrosion, stress corrosion, coating, thin films,

…etc.

14

Code Author Title

006 M. Salhi Development of a magnetron sputtering system for in-situ deposition of thin

multilayerscoatings

009 N.

Boukmouche

Study of corrosion resistance of carbon steel in albian water solution in the

presence of Chimec as corrosion inhibitor

011 Faiza Kakaa Corrosion performance and electrochemical stability of 316L in body fluid

014 A. Lebbad Structural and microstructural properties ofAl-doped ZnO thin films prepared by

sol gel method

018 Karima

Abderrahim

Synthesis and Inhibition effect of tetrathiafulvalene –TTF- type on the Corrosion

of Mild Steel in 0.5 M H2SO4 Solution

027 Ammar

KASSAA

STUDIES OF IRON DISELENIDE THIN FILMS DEPOSITED BY THERMAL

EVAPORATION

031 Mohammed-

Amin

BOUMEHRAZ

DIAGNOSIS OF DAMAGE OF METAL STRUCTURES UNDER THE

INFLUENCE OF CORROSION IN THE REGION OF DJIJEL

032 Hanane

Hamani

Application of new azomethine as corrosion inhibitor on mild steel in acidic

medium: Electrochemical, thermodynamic and SEM investigations

043 H. Mechri Friction and wear behaviors of TiCN coating treated by R.F magnetron sputtering

045 TRAIAIA

Noura

The degradation mechanism of coatings in MgO-C of the steel pockets

050 M. Boudjerda Numerical Investigations of a reconfigurable patch antenna using thin ferrite film

054 O. Bouriche Study of stuctural , electrochimical and antibacterial properties of PVK pur and

Doped with TiO2

058 M .Rekaik Production and characterization of a composite deposit on steel Nickel-Alumina

November 28, 2016

10h10-10h40

Poster session IV (IC-WNDT-MI’16)

Theme 4

Theme 4 Corrosion and materials protection, pitting corrosion, stress corrosion, coating, thin

films, …etc.

Code Author Title

060 Leila LAMIRI Corrosion protection of stainless steel by thin films of poly (bithiophene) in

different medium

061 S. Laidoudi Effect of Applied Potential on Electrodeposition and Properties of Cuprous

Oxide (Cu2O) Nanostructures

063 Djamel Eddine

Hamza

Electro-polymerization and characterization of PANI thin films obtained from a

sulfuric acid bath on ITO

064 Nadia Boukhalfa HARACTERIZATION OF SYNTHESISED LAYERED DOUBLE

HYDROXIDES MATERIALS

071 S. HARIECH Elaboration and Characterization of Cadmium Sulfide (CdS) Thin Films

Prepared by Chemical Bath Deposition (CBD)

078 Amina Sriba Microstructure Evolution, Mechanical Properties and Pitting Corrosion

Resistance of AISI 316L Stainless Steel Weldment

080 O. Belgherbi Electropolymerization of Polyaniline Thin Films on Indium Tin Oxide Substrate

082 Alioui Sara Microstructure development during pack aluminization of Z60CDV5 steel

085 Imene

Benmahammeda

Study on the anticorrosive power of a Schiff's base (4,4'-bis (2-thiophene

carboxaldehyde) diimino diphenyl sulfide) on the XC48 steel in aggressive HCl

1M

087 CHIKOUCHE

Imene

Elaboration and characterization of a multifunctional (Cu-In)/conducting

polymer/Si hybrid composite coating

15

089 OKBA Fouad Nano Thin Layer Silicon Elaboration

091 N.BOUSSATHA Synthesis, structural and optical properties of ZnO thin films

099 F.Termemil Contribution à l’étude de la formation de la rouille verte carbonatée RV(CO32-

)

en milieu sulfaté en fonction du pH et du rapport [SO42-

]/[HCO3-]

105 N. Madaoui Corrosion study on TiCrN coatings deposited on 316L by RF magnetron

sputtering

108 B.Idir CORROSION INHIBITION EFFICIENCY OF PHENANTHROLIN ON

GRAY CAST IRON IN HYDROCHLORIC ACID

109 Nesrine Ramli Evaluation of electrochemical behavior of the passive film formed on Ni in

0,5M H3PO4 solution

111 R.Hendi Corrosion due to the interference between cathodic protection systems

112 S. Taleb Influence of electrodeposition conditions on the morphology and properties of

ZnO nanosheets

117 Rabie Bacha Synthesis and Characterization of CuO Nano Particles by Sol-Gel Method

123 Hind

LAOUAMRI

Functional coatings: Application to cover panels of solar cells

127 S. Haya Fabrication and characterization of pure ZnO thin films deposited by Sol–gel

method

132 Benamar balegh Time-varying ultimate strength of aging sheet pile considering corrosion effect

133 S. Lallouche Determination of residual stress in Al-Alloys thin films

133 S. Lallouche Etude structurale et électrique des dépôts nanostructures Al (% Cu)

144 Houssem Eddine

El yamine

SAKHRAOUI

ILLUSTRATION OF SQUAR-WAVE VOLTAMMETRY AS AN

EFFICIENT ANALYTICAL METHOD FOR THE HIGH DETECTION OF

NANOMOL AMOUNT OF HEAVY METALS FOR ENVIRONMENTAL

APPLICATIONS

149 Hakim

BENSABRA

THE EFFECT OF Cu2+

ADDITIVE ON CORROSION RESISTANCE OF

PHOSPHATE COATING OF REBAR STEEL

157 Meryem ACILA THE COMPARATIVE STUDY BETWEEN THE INHIBITIVE EFFECT OF

SODIUM MOLIBDATE AND SODIUM VANADATE ON THE

CORROSION BEHAVIOUR OF ALUMINIUM ALLOY IN CHLORIDE

MEDIUM

161 F. Mousli Elaboration and characterization of nanosized RuO2-TiO2 powder by Sol Gel

route

163 Leila Hasniou Steel XC38 protection against corrosion by an organic compound (DHASC) in

hydrochloric acid medium

170 Mohamed

HAMIDOUCHE

Microstructural, morphological, mechanical and tribological characterization of

nanocrystalline nickel and Ni-Co electrodeposits coatings

173 R. Boufnik Study of etch characteristics of monocristalline silicon wafers using KOH

solution

174 L. Bouamama DFT study of F atom adsorption on Si(001) surface

177 S. KABOUCHE DISSOLVED OXYGEN AND TEMPERATURE EFFECT ON THE

ELECTROCHEMICAL SYNTHESIS OF SnS

178 Yamina

LOUAFI

CORROSION BEHAVIOUR OF CARBON STEEL IN CHLORIDE

SOLUTION AT DIFFERENT CONCENTRATION OF SODIUM

HYDROGENOCARBONAT

188 Ahmed LOUAFI The inhibition effect of Gum Arabic (GA) On the corrosion of carbon steel in

HCl medium

201 A. LEKOUI Investigation on the corrosion process of carbon steel coated by HVOF

WC/Co/Cr cermets in neutral solution

210 Saida

MOUZALI

Experimental studies of new Schiff base as corrosion inhibitor for mild steel in

sulfuric acid solution

211 F. Medjaldi Optical and photocatalytic properties of TiO2 thin films prepared by sol–gel

method

213 Hakim

BENSABRA

INHIBITIVE EFFECT OF PHOSPHATE IONS ON THE PITTING

CORROSION BEHAVIOUR OF STEEL REINFORCEMENTS PART (I):

STUDY IN SIMULATED CONCRETE PORE SOLUTION

232 L. Touafri Experimental and computational studies on the inhibition efficiencies of

Tyrosine and phenylalanine as green inhibitors for mild steel in acidic medium

16

244 S. Benfattoum Corrosion study of Neodymium-Iron-Boron alloys: Neutron reflectometry of

the ultra-thin polymer film interfaces and effectiveness of polymer coatings

254 F. TOURI Preparation electrochemically and structural and morphological characterization

of thin films based on zinc oxide

263 D. Allou Corrosion of multi-material in marine environment

266 F. Ahnia Corrosion behavior Molybdenum coatings on industrial carbon steel in

simulated sea water

275 A. Kouache Protection d’un acier au carbone contre la corrosion acide par un inhibiteur vert

283 A. Chaa Electrochemical behavior with and without the presence of hardening phase in

ferritic stainless steel

286 BAHI

AZZOUOUM

Ahmed

ELABORATION AND CHARACTERIZATION OF NiO THIN FILM

DEPOSITED BY CHEMICAL SPRAY PYROLYSIS TECHNIQUE, SOLAR

CELLS APPLICATIONS

289 M.SELLAM Effect of Heat Treatments on Mechanical and Electrochemical Properties of

6082-T651 Aluminium Alloy in NaCl Medium

292 N. BOUZEGZI Electrochemical behavior and microstructure of infiltrated hard material

composite: WC-W-Mn-Ni / Cu-Sn / and brazed with (WC-Co) using Ag-Zn-Cu

as filer metal

326 Rahmani Farid PROTECTION DES OUVRAGES GAZIERE CONTRE LA CORROSION

327 S.Bouyegh Quality and performance of sacrificial anodes used in cathodic protection

332 D. Dergham Effet de Silicium sur les propriétés de Ti déposé par évaporation thermique sous

vide