Science Workshop for Parents 2014
description
Transcript of Science Workshop for Parents 2014
-
Science
Workshop For
Parents
Yu Neng Pri Sch
8 March 2014
-
Workshop Outline
What is Inquiry Based Learning and its impact on
acquisition of scientific concepts. ( 15 min )
Knowledge with Understanding(KU) vs. Process
Skill(PS) Questions. (15 min )
Strategies in answering Process Skill(PS) questions.
i) Terms used in Science Open-ended questions
(15 min )
ii) Answering Process Skill Qns using RIP (30 min )
Common misconceptions of pupils. ( 15 min )
Developing a passion for Science learning. ( 15 min )
-
Inquiry-based Approach
Teaching science as inquiry must go beyond merely
presenting facts and using just the textbooks.
Focus on questioning . Who,What,How,Why?
Pupils must be actively engaged in the collection
and use of evidence: formulate and communicate
explanations based on scientific knowledge.
-
Knowledge,
Understanding
and Application
Skills and
Processes
Ethics and
Attitudes
Scientific phenomena, facts, concepts and
principles
Scientific vocabulary, terminology and
conventions
Scientific instruments and Apparatus including
techniques and aspects of
Safety
Scientific and technological applications
Skills
Observing Comparing Classifying Using apparatus and equipment
Communicating Inferring Formulating hypothesis Predicting Analysing Generating possibilities Evaluating Processes Creative problem solving Decision-making Investigation
Curiosity Creativity Integrity Objectivity Openmindedness Perseverance Responsibility
Primary Science Curriculum 2014
Remembering
Understanding
Applying
Understanding
Applying
Analysing
Evaluating
Creating
60%
40%
-
Environment Web of Life Adaptation Mans Impact on the Environment
-
12 qns K/U
18 qns PS
16m K/U 24m PS
understanding
-
With understanding
understanding
-
Process Skill
Questions
-
Themes Skills
Diversity Cycles
Systems
Interactions
Energy
1) Observing
2) Comparing
3) Classifying
4) Using apparatus
5) Communicating
6) Analysing
7) Generating
8) Evaluating
9) Inferring
10) Generating Possibilities
Basic
Process
Skills
9) Creative Problem Solving
10) Decision-making
11) Investigation
Integrated Processes
Summary of
Process Skills
-
Observing This is the skill of using our senses to gather information about
objects or events. This also includes the use of instruments to
extend the range of our senses.
Comparing This is the skill of identifying the similarities and differences
between two or more objects, concepts or processes.
Classifying This is the skill of grouping objects or events based on common
characteristics.
Process Skills
-
Observing / Comparing
The diagrams below show two Plants A and B.
Based on the above diagram, state one difference and one
similarity between Plant A and Plant B.
Similarity: Both have leaves.
Difference: Plant B has fruits but Plant A does not have fruits.
Plant A Plant B
-
Classify the following items in the correct group.
Classifying
Things
Living Things
____________
____________
Non-Living Things
Once Alive
____________
____________
Never Alive
____________
____________
Lime Plant
Paper
Bread
Iron
Paper Lime plant Bread Iron
-
Communicating This is the skill of transmitting and receiving information
presented in various forms - verbal, pictorial, tabular or
graphical.
Inferring This is the skill of interpreting or explaining observations or
pieces of data or information.
Process Skills
-
Communicating & Inferring Ameer set-up the circuit tester
shown on the right. He placed different
materials in the gap marked A in the
circuit tester and recorded the brightness
of the bulb in the table below. The term lux is a unit used when measuring the brightness of an object: the higher the lux
value, the brighter the object.
Material
Brightness of Bulb (lux)
Reading 1 Reading 2 Reading 3
W 302 313 307
X 423 450 448
Y 328 336 324
Z 412 421 414
Which one of the above materials should Ameer choose to
make an electric wire in a circuit? Why?
A
-
X. The lux value of the bulb for Material X is the
highest, indicating that the bulb was most brightly
lit with Material X.
Which one of the above materials should Ameer choose to make an electric wire in a circuit? Why?
Communicating & Inferring
This shows that Material X allowed most electricity
to flow through it, so Material X is the best
electrical conductor, and hence most suitable for
making an electric wire in a circuit.
-
Predicting This is the skill of assessing the likelihood of an outcome based on
prior knowledge of how things usually turn out.
Analysing This is the skill of identifying the parts of objects, information or processes, and the patterns and relationships between these
parts.
Evaluating This is the skill of assessing the reasonableness, accuracy and quality of information, processes or ideas. This is also the skill of
assessing the quality and feasibility of objects.
Process Skills
-
Predicting/Analysing
A mixture of ice and water was poured on the outer surface of
the round bottomed-flask.
Glass Delivery Tube
Ice and water Water level
Round-Bottomed
Flask
What will happen immediately to the water level in the delivery tube? Explain.
The loss of heat causes the flask to contract, so the air in
the flask will be pushed into the glass delivery tube
causing the water level to fall or drop.
The water level will fall or drop.
-
Richard was trying to make a model of the water cycle to demonstrate
the formation of rain. He noticed that hardly any rain was formed under the aluminium sheet or inside the beaker.
Aluminium sheet
beaker
Ice cubes
Evaluating
Explain why Richards set-up did not work well.
The temperature at the bottom and the top of the aluminium
sheet was the same as the surrounding. Therefore, there was
little/no condensation of water to allow rain to form.
-
Generating possibilities
This is the skill of exploring all the alternatives, possibilities and
choices beyond the obvious or preferred one.
Using apparatus and equipment
This is the skill of knowing the functions and limitations of
various apparatus, and developing the ability to select and
handle them appropriately for various tasks.
Process Skills
-
Generating possibilities/
Using apparatus & equipment
John was puzzled when his friends told him that plants give off
water vapour. He wanted to convince himself if it was true or
not. He went to his garden and saw these things there.
Plastic bags Newspapers Strings
A pot of balsam plant
a) Suggest what he could do to show that plants give off
water vapour.
He need not use all of the above things.
b) Explain your answer in (a).
a)John could wrap the leaves of the balsam plant with a plastic
bag and tie it up using the string.
( Take note that he did not have to use the newspapers.)
-
b)The plant gives off water vapour through
tiny openings found on its leaves. The water
vapour condenses into water droplets upon
touching the cooler inner surface of the
plastic sheet. He will see tiny water droplets
on the inner sides of the plastic bag.
-
Answering
Open-ended
Process Skill
questions
Words in the
questions that
indicate how they
should be answered
-
Some can be answered using only one word while
others may require several sentences.
It is important to know how much detail to give in your answer.
Writing more than is required wastes precious time
Writing too little causes you to lose precious marks.
There are words in the questions that indicate how they should be answered.
-
Answering OE questions
Terms used in questions
1. State Simply required to write down the
answer.
2. Describe To give relevant details about an object or event. Not required to explain your
answer.
3. Explain To give reasons or make something
clear and simple to understand. It is not
enough to give only the key words as
the answer. Link the answer to at least one scientific concept.
-
State the conditions necessary for plants to carry out photosynthesis.
The presence of carbon dioxide, water and light are necessary.
State
-
Describe
The diagram below shows a strong magnet attached to each toy car, A and B.
S N N S
Car A Car B
Direction
Describe what happens to toy car B when toy car A is slowly moved towards it in the direction shown above.
Toy car B will move away from toy car A.
-
Two similar wet towels were hung out to dry in the sun. The diagram below shows how the towels were hung.
It has a larger exposed surface area, allowing the water in it to evaporate faster.
State which towel will dry faster. Explain why.
Explain
Towel B.
-
Answering Open-ended questions
Terms used in questions
4. What does this
experiment tell
you?
To interpret the results of the experiment
and state what the results mean. Do not
need to describe the results.
5. What is the
purpose of the
experiment?
To state the aim of the experiment. Do not
need to interpret the results or describe
them.
6. What would
happen?
To make logical prediction. No
explanations are required.
-
When object X is connected to the circuit, the bulb lights up.
Object X is a conductor of electricity.
What does this activity tell you about object X?
What does this
activity tell you
-
Jill poured equal amount of water at 850C into Glass A and Glass B. She wrapped Glass A with a cotton handkerchief and Glass B with a silk handkerchief. Both handkerchiefs were of the same size. After 15 minutes, Jill measured the temperature of the water in the glasses again.
The purpose is to find out which material is a better insulator of heat.
What is the purpose of her experiment?
What is the purpose
-
A thick elastic band was stretched and attached to the wall at one end and a pole holding a basket of marbles at the other end.
The elastic band would stretch and become longer.
a) What would happen to the length of the elastic band if more marbles are added to the basket?
What would happen
-
A thick elastic band was stretched and attached to the wall at one end and a pole holding a basket of marbles at the other end.
Move the basket of marbles further away from the wall.
b) How can you make the elastic band stretch more without adding any more marbles to the basket?
How can you make
-
Dos and Donts
Weaknesses
in answers
-
Example 1 Roza and her classmates dug a hole in the school garden and set up an investigation to find out if it was possible to obtain fresh water from seawater. The diagram below shows their set-up.
After the set-up was left in the sun for a day, the pupils found some freshwater in the cup at night. Describe how water was obtained in the cup. [2m]
Describe
-
Answer 1
By evaporation and condensation. [0m]
Weakness : Answer is too general and vague. No description was given.
-
Answer 2
Water evaporates from seawater. [1/2m] The water vapour then condenses to form a liquid.
Weakness : Answer is not given in the context present in the question.
-
Answer 3
During the day, the heat causes water to evaporate from the seawater and changes it to water vapour. Water vapour is visible and does not have a definite shape. At night, when it is cooler, the water vapour condenses onto the plastic sheet as droplets of water. Water as a liquid can flow from a higher level to a lower level. The water droplets then run along the slope of the plastic sheet and drip into the cup.
Weakness : Answer is too long and includes unnecessary details.
-
Suggested answer
During the day, water gains heat from the Sun and evaporates [1/2m] and changes to water vapour.[1/2m] At night, when it is cooler, the water vapour loses heat and condenses on the cooler plastic sheet above.[1/2m] The water then drips from the plastic sheet into the cup.[1/2m]
-
Example 2 Mr Tan has a small aquarium with a few fish. Instead of an air pump, he places some water plants in the aquarium. How do the water plants help the fish in the aquarium? [1m]
Describe
-
Answer 1
For the fish to survive. [0m]
Weakness : Answer is too general and vague. No description was given.
-
Answer 2
The water plants produce oxygen. [1/2m]
Weakness : Answer is not given in the context present in the question.
-
Answer 3
When the water plants make food during photosynthesis using carbon dioxide and water, oxygen is produced for the fish to breathe.
Weakness : Answer includes unnecessary details.
-
Suggested answer
The water plants produce oxygen during photosynthesis [1/2m]which the fish in the aquarium need to breathe. [1/2m]
-
Answering
challenging
questions
-
Require you to recall concepts learnt
Use multiple process skills and apply
the relevant concepts accordingly.
-
Step 1
R I P
Read the question
carefully and
highlight the
keywords.
(Reread if required)
-
Step 2
R I P
Identify the
1)Topic(T)
2)Sub Topic(ST)
3)Scientific Knowledge(SK)
4)Make an Inference(I) based on question and the scientific knowledge, if possible.
-
Step 3
R I P
Perform an analysis
To compose the answer by linking it to the concept tested and in the context present in the question.
-
David placed an inverted test-tube containing some water
and hydrilla inside a beaker of water as shown in the
diagram below.
After ten minutes, he counted the number of bubbles produced by
the water plants over 1 minute. He repeated the procedure 4 more
times, increasing the distance between the light source and the
beaker. He recorded his observations in the table shown below
Distance of light source from beaker (cm) Number of bubbles produced in 1 minute
30 60
40 50
50 40
60 30
70 20
The constants(C) are the
amount of carbon dioxide in
the water ,the water and the
hydrilla.
T: Energy and Photosynthesis
ST : Photosynthesis in Plants.
SK : Plants can make their
own food only in the presence
of light energy, carbon
dioxide and water.
I : The bubbles formed must
be oxygen
decreasin
g
Increasing
-
(a) Write down one observation David can make from the above experiment.[1m]
(b) Write down one conclusion David can make from the above experiment.[1m]
As the distance of the light source from the
beaker increases, the number of bubbles
produced in 1 minute decreases.
The further the distance between the light source
and the hydrilla, the slower the rate of
photosynthesis.
-
A B C D
When Bars A, B, C and D are hung from a rod using strings of the same
length, they move in the manner as shown in the diagram below. Some
of them are magnets but some of them are not.
a) Use the table below to classify the four bars according to
their magnetic property.
Magnets Non-magnetic
materials
Not Possible To Tell
A
B
C
D
T: Magnets
ST: Magnetic property
SK: Unlike poles attract while
like poles repel
I: Non-magnetic materials
neither attract or repel.
Magnetic materials only
attract.
-
Bar E was then hung between bar A and bar B and this was
what happened.
Is bar E a magnet? Explain your answer.
It repels bar A and only magnets
can repel one another.
Bar E is a magnet.
-
When the trigger of a popgun is pressed, the ball pops out and moves along a curved path as shown by the dotted line in the diagram below.
As you observe the ball moving along the curved path, how can you tell that a force is acting on the ball?
how can you tell
-
What you should do
The curved path shows that the ball is changing its direction as it moves and only a force can change the direction of the ball.
T: Forces
ST: Effects of A Force
SK: When a force acts on an object, it can cause the
direction of its movement to change.
As you observe the ball moving along the curved
path, how can you tell that a force is acting on the
ball?
-
Three identical containers, A, B and C, are each filled with the
following substances, W, X, Y and Z. Stoppers were then used
to seal the three air-tight containers as shown below.
An object of mass 10 kg was then placed on the stopper of
each container. The stoppers were observed and the results
recorded in the table below.
C
Container A B C
Did the stopper move? Yes No Yes
filled with Z
-
(a) Based on the results, which of the substance(s) (W, X, Y or Z)
is/are most likely a gas? [1m]
(b) Explain your answer in (a). [1m]
T: Matter
ST: Three States of Matter
SK: A gas has no definite shape nor volume.
I: A gas can be compressed but a solid
cannot be compressed.
X and Z
A gas can be compressed (1/2m) and the 10kg masses
compress Gas X and Z and push the stopper downwards (1/2m).
-
Ben poured exactly 500ml of tap water into each
saucepan shown below. He put the saucepans on
separate burners of the same size and covered one of
it with a lid. The burners were turned on high.
A B
-
Ben recorded the time taken by the tap water in
saucepan A and saucepan B to boil and plotted his
reading in the graph shown below.
Identify and state two errors that he has made when
he plotted the graph.
of water
-
T: Heat & Temperature
ST: Conduction of heat
SK: Water freezes at 0C and boils at 100C.
Heat travels from a hotter to a colder place or object.
I: Temperature of tap water is above 0C .
Heat travels when two objects touch each other.
-
Ben recorded the time taken by the tap water in
saucepan A and saucepan B to boil and plotted his
reading in the graph shown below.
Identify and state two errors that he has made when
he plotted the graph.
of water
A B
-
(ii) The tap water in saucepan A should take longer to boil
than the tap water in saucepan B.
T: Heat & Temperature
ST: Conduction of heat
SK: Water freezes at 0C and boils at 100C.
Heat travels from a hotter to a colder place or object.
I: Temperature of tap water is above 0C .
Heat travels when two objects touch each other.
i)The graph should not begin at 0 degree Celsius [m] as
the temperature of tap water is not 0 degree celsius.[m]
-
In another experiment, Ben placed a potato of similar sized in each
saucepan and covered the saucepan with lids. Both pans had
enough tap water (1litre) to cover the entire potato. He placed the
pans on different types of metal plates as shown below and turned on the heat.
Which potato would be cooked much faster? Explain your answer.
Potato in Saucepan A [1m]. Saucepan A has a flat metal plate
which has more contact area [m] with the heat so that more
heat can be transferred [m]to cook the potato faster.
-
Science
Misconceptions
-
True or False
Breathing is respiration.
-
Breathing is the process of taking in oxygen and
expelling carbon dioxide.
-
Respiration is the process where the body breaks
down the oxygen so that the cells in the body can
use it to create energy.
-
True or False
Batteries store electricity.
-
Batteries convert stored chemical
energy into electrical energy.
-
-
-
A community is the same as a population.
Hyenas, vultures, earthworms, millipedes and termites are decomposers.
Camels adapt to the dry desert environment by drinking a lot of water at one time and storing it in their humps.
All aquatic animals adapt to breathing underwater by having gills.
Global warming causes all parts of the world to become warmer and drier.
-
How can you help your child?
Raise your childs awareness of Science in their daily life. Science is everywhere. Connect the
concepts learnt in the textbooks to actual
happening that takes place around them.
Create opportunities for Science learning at home
while watching educational programmes or
perhaps embarking on inquiry-based experiments
right in your very own home.
-
Explore non-formal education sites. Eg. Visit to
zoo, beach, hiking
Inject fun into Science learning and revision
through games, quizzes and crossword puzzles.
Show excitement/passion for science. If you
expect your child to develop the passion for
the science, you too have to develop it.
Develop existing skills, reinforce what is learnt
in school. ( You can apply what you have learnt on RIP strategy! )
How can you help your child?
-
USING ICT for self-directed
learning
BrainPoP for EMS
http://www.brainpopjr.com/
http://www.brainpop.com/
Username: yunengps
Password: 1658stud
AsknLearn Learning Management System
https://lms.asknlearn.com/
-
Q & A
Mr Hashim HOD Sci
Mdm Dewi LH Sci
Mrs Singh P5 Sci Tr
Mrs Iris Lim P6 Sci Tr
-
The End
Please fill up the
feedback form.