SCHOTTKY BARRIER RECTIFIER - ElecFans
Transcript of SCHOTTKY BARRIER RECTIFIER - ElecFans
SCHOTTKY BARRIER RECTIFIER
DN:T20526A0
http://www.microdiode.com Rev:2020A0 Page :1
Reverse Voltage - 20 to 200 Volts Forward Current - 5.0 Ampere
SR520 THRU SR5200
Mechanical Data
Features
The plastic package carries Underwriters Laboratory Flammability Classification 94V-0Metal silicon junction,majority carrier conduction Low power loss,high efficiencyHigh forward surge current capabilityHigh temperature soldering guaranteed: 250°C/10 seconds,0.375”(9.5mm) lead length, 5 lbs. (2.3kg) tension
DO-201AD
Dimensions in inches and (millimeters)
Case : JEDEC DO-201AD Molded plastic bodyTerminals : Solder plated, solderable per MIL-STD-750,Method 2026 Polarity : Polarity symbol marking on bodyMounting Position : AnyWeight : 0.04 ounce, 1.10 grams
Maximum Ratings And Electrical Characteristics Ratings at 25°C ambient temperature unlss otherwise specified.
Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%.
ParameterSYMBOLS
SR520
SR530
SR540
SR550
SR560
SR570
SR580
SR590
SR5100
SR5150
SR5200
UNITSMarking Code
MDDSR520
MDDSR530
MDDSR540
MDDSR550
MDDSR560
MDDSR570
MDDSR580
MDDSR590
MDDSR5100
MDDSR5150
MDDSR5200
Maximum repetitive peak reverse voltage VRRM 20 30 40 50 60 70 80 90 100 150 200 V
Maximum RMS voltage VRMS 14 21 28 35 42 49 56 63 70 105 140 V
Maximum DC blocking voltage VDC 20 30 40 50 60 70 80 90 100 150 200 V
Maximum average forward rectified current 0.375”(9.5mm) lead length(see fig.1) I(AV) 5.0 A
Peak forward surge current
8.3ms single half sine-wave
superimposed onrated load (JEDEC Method)IFSM
150 A
Maximum instantaneous forward voltage at 5.0A VF 0.55 0.70 0.85 0.95 V
TA=25℃Maximum DC reverse currentat rated DC blocking voltage TA=100℃ IR
0.5 0.2mA
20.0 10.0 2.0
Typical junction capacitance (NOTE 1) CJ 500 400 pF
Typical thermal resistance (NOTE 2) RθJA 25.0 ℃/W
Operating junction and storage TJ -50 to +125 -50 to +150 ℃
Storage temperature range TSTG -50 to +150
Note:1.Measured at 1MHz and applied reverse voltage of 4.0V D.C.
2.Thermal resistance from junction to ambient at 0.375”(9.5mm)lead length,P.C.B. mounted
℃
0.220(5.6)0.197(5.0)
DIA.
DIA.
1.0 (25.4)MIN.
0.375 (9.50)0.285(7.20)
1.0 (25.4)MIN.
0.052 (1.3)0.048 (1.2)
Rev:2020A0 Page :2
Ratings And Characteristic Curves
The curve above is for reference only.
http://www.microdiode.com
Reverse Voltage - 20 to 200 Volts Forward Current - 5.0 Ampere
SR520 THRU SR5200
5
4
3
2
1
00 25 50 75 100 125 150 175
150
125
100
75
50
25
0.01 0.1 1 10 100
100
10
1
0.1
t,PULSE DURATION,sec.
FIG. 6-TYPICAL TRANSIENT THERMAL IMPEDANCE
NUMBER OF CYCLES AT 60 Hz
FIG. 2-MAXIMUM NON-REPETITIVE PEAK FORWARDSURGE CURRENT
FIG. 1- FORWARD CURRENT DERATING CURVE
Single PhaseHalf Wave 60HzResistive orinductive Load
1 10 100
8.3ms SINGLE HALF SINE-WAVE(JEDEC Method)
0 20 40 60 80 100
100
10
1
0.1
0.01
0.001
TJ=25 C
TJ=100 C
PERCENT OF PEAK REVERSE VOLTAGE,%
FIG. 4-TYPICAL REVERSE CHARACTERISTICS
AMBIENT TEMPERATURE, C
SR570-SR5200SR520-SR560
TJ=75 C
0.1 1.0 10 100
REVERSE VOLTAGE,VOLTS
FIG. 5-TYPICAL JUNCTION CAPACITANCE
TJ=25 C
10
100
1000
2000
SR550-SR5200SR520-SR540
0.2 0.4 0.6 0.8 1.0 1.1
FIG. 3-TYPICAL INSTANTANEOUS FORWARDCHARACTERISTICS
INSTANTANEOUS FORWARD VOLTAGE,VOLTS
0.01
0.1
1
20
10
TJ=25 CPULSE WIDTH=300 µs1%DUTY CYCLE
SR550-SR560SR520-SR540
SR570-SR5150SR5200
PEA
K F
OR
WAR
D S
UR
GE
CU
RR
ENT,
AM
PER
ESIN
STA
NTA
NEO
US
REV
ERSE
CU
RR
ENT,
MIL
LAM
PER
ESTR
AN
SIEN
T TH
ERM
AL
IMPE
DA
NC
E,C
/W
AVER
AG
E FO
RW
AR
D R
ECTI
FIED
CU
RR
ENT,
AM
PER
ESJU
NC
TIO
N C
APA
CIT
AN
CE,
pF
INST
AN
TAN
EOU
S FO
RW
AR
DC
UR
REN
T,A
MPE
RES
Rev:2020A0 Page :3http://www.microdiode.com
Reverse Voltage - 20 to 200 Volts Forward Current - 5.0 Ampere
SR520 THRU SR5200
Package Information
DO - 201AD
Component alignment
Taping Specifications
Item Symbol
Component Pitch A 10.0±0.5
Specifications(mm)
Ammunition Package Specifications
Package
255*74*145 1000
QTY/Box Carton Size
410*275*340
Q'TY/Carton
10000
Inner Box Size(mm) (mm)(pcs) (pcs)
Tape width T 6.0±0.5
Inner Tape Pitch B 52.4±1.5
Z 1.2 Max
Exposed adhesive E 0.8 Max
Body eccentricity L1-L2 1.0 Max
DO - 201AD
Bulk Package Specifications
Package
198*86*21 200
QTY/Box Carton Size
460*220*250
Q'TY/Carton
10000
Inner Box Size(mm) (mm)(pcs) (pcs)
Important Notice and DisclaimerMicrodiode Electronics (Jiangsu) reserves the right to make changes to this document and its products and
specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design,purchase or use.
Microdiode Electronics (Jiangsu) makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, not does Microdiode Electronics (Jiangsu) assume any liability for application assistance or customer product design. Microdiode Electronics (Jiangsu) does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application.
No license is granted by implication or otherwise under any intellectual property rights of Microdiode Electronics (Jiangsu).
Microdiode Electronics (Jiangsu) products are not authorized for use as critical components in life support devices or systems without express written approval of Microdiode Electronics (Jiangsu).