Schmidt Armaturen FlowProTM - UECcontrol · • Mounting according to IEC 534, part 6 ( NAMUR ) •...
Transcript of Schmidt Armaturen FlowProTM - UECcontrol · • Mounting according to IEC 534, part 6 ( NAMUR ) •...
Schmidt Armaturen
FlowProTM
Class 900, 1” - 6"
2
ApplicationControl of gases, vapours and liquids.
The modular concept of valve, multispr ing ac tuator and d ig i ta lFOXBORO/Eckardt positioner TypeSRD 992, facililates trouble freeexpans ion to a l low for thecommunication capability of theFLOWPRO Valve System.
With its simple design the FLOWPROmodular concept has a wide range ofapplication.
Product featuresBody shape gives optimumflow characteristic
• Excellent flow dynamics when cor-rectly selected
• Heavy top guided plug• Largest possible kvs-values
Long service life and opera-tional reliability
• With aggressive or evaporating me-dia due to sturdy design
• Strong guides, give minimum vibra-tion and wear
Replaceable trim
• Simple maintenance as the valvebody remains in the piping whentrim is replaced
• Seat = DN, screwed seat
Wide range of application
• Up to 13 Kvs-values are available persize
• Trims are generally interchangeable
Quality assurance system certifica-ted acc.EN ISO 9001 : 2000 including pro-duct development.
01SCHERR
Actuators
Bonnets
Trims
Body
Within the series the followingcombinations of body, trim, bon-nets and actuators for each valvesize are possible:
Three-Flange Body, flanged
Gasket
Gasket
Pneumatic linearActuator
PSL-Electriclinear Actuator
Linear thrust Unit forElectric rotary Actuators
Haselhofer-Electriclinear Actuator
Standard Bonnet Bellows seal Bonnet Extension Bonnet forhigh/low temperatures
Contoured Plug
Multi-Hole Plug RLS, 2-step, Series 1
Silentpack
Screwed Seat
3
Body with Flange Connection
Nominal Pressure Level, Form of Connection
Pressure- Temperature Ratings ( acc. to ANSI B16.5 )
Packing Box
Bonnet
Plug
Material Certificateacc. EN 10 204
Pressure/TightnessCertificate acc. EN 10 204
Nominal SizeBody
Three-flange
Material
A216 WCB
A217 WC6
A351 CF8M
1" 1 1/2" 2" 3" 4" 6"3.1 B2.2without3.1 B2.2without
Form RFFlanges acc. toANSI B16.5
Form of ConnectionNominal SizeANSI
Class
300
Form RTJ
1" 1 1/2" 2" 3" 4" 6"
Body Material ANSI A217 WC6ANSIClass
safe load operating pressure in bar at °C
900
-73 -29 38 100 150 200 250 300 350 400 450 500 538
155,1 154,4 149,2 143,9 138,6 128,6 120,7 109,8155,1 101,4 75,7 44,8
Body Material ANSI A351 CF8MANSIClass
safe load operating pressure in bar at °C
300
-60 -29 38 100 150 200 250 300 350 400 450 500
148,9 126,8 115,6 107,0 100,2 95,0 91,3 88,2148,9
-73
148,9
Body Material ANSI A216 WCBANSIClass
safe load operating pressure in bar at °C
900
-73 -29 38 100 150 200 250 300 350 400 450 500 525
153,1 139,2 135,7 131,4 125,1 116,1 110,8 103,4153,1
BonnetBody-MaterialsPressure Balancing
A216 WCB
A351 CF8M
Sizes
Unbalanced,Shaft guided
1"
to
6"A217 WC6
Standard Bonnet
Use:General,-10 °C to 250 °C
Bellows seal Bonnet
Use:Toxic, smell strong,searching, costly media orvacuum,-60 °C bis 400 °C
Extension Bonnet
Use:Protect the Actuatorif temperature exeeds-60 °C to -10 °C for low temperature250 °C to 538 °C for high temperature
A351 CF8M
A351 CF8M
A216 WCB
A216 WCB
3"
to
6"
V-Ring balanced,up to 250 °C
Piston-Ring balanced,up to 450 °C
BonnetType of Packing
PTFE-Rings - 60 °C ÷ 250 °C, general use, BAM
Pure Grafite-Rings - 60 °C ÷ 538 °C, general use, BAMstan
dar
d
Extension BonnetBellows seal BonnetStandard Bonnet
Design Guide of Plug Flow Action
equal percentage
linear
tends toopenValve
tends tocloseValve
CharacteristicPlug Type
Contoured Pluggeneral use
RLS-Unitlike Multi-Hole Plug, for red. noise ≤ 30 dB(A)
equal percentage
linear
standard partialstellited
fullstellited
softseated
hardened tenifertreated
Top guided
Seatø 4 - 130
equal percentage
linear
Perforated Plugin case of cavitation, high differential pressure bygases, vapours, for reducing noise ≤ 18 dB(A)
Contoured Plugwith Silentpack, only for moderate operating condi-tions by gases and steam, for red. noise ≤ 18 dB(A)
equal percentage
linear
Disk Plug on / off
4
Contoured PlugCharacteristic: modified - equal percentage * Seat facing for seat diameter < 10 mm = 10,5 mm
Perforated PlugCharacteristic: equal percentage
Incorporable seat diameter depends on nominal size DNMaterial / Design
1.4571 1.4122
Stroke = 20 mm 40 mm 60 mmstandardpartial
stellitedfull
stellitedsoft
seated hardenedstandard
6"4"3"2"1 1/2"1"Seatø
100
84
80
67
53
50
42
40
34
25
25
20
16
12
10
8
6
4
4
105
4
4
4
8
130
withoutSilentpack
withSilentpack
Kvs(m3/h)
34
42
67
84
-
-
-
-
-
180
355
160
125
100
47,5
40
31,5
25
250
0,25
0,16
0,40
0,10
0,063
14
63
16
10
6,3
4,0
2,5
1,6
0,63
1,0
25
40
100
160
125
280
12,5
22,4
20
31,5
35,5
90
90
125
224
Kvs(m3/h)
Incorporable seat diameter depends on nominal size DNMaterial / Design
Stroke = 20 mm 40 mm
1.4122
60 mm
Seatø
100
84
67
53
50
42
40
34
25
20
20
20
105
130
84
67
80
112
100
71
56
28
25
20
16
10
6,3
4,0
2,5
160
200
125
71
80
1.4571tenifer treated standard hardened
6"4"3"2"1 1/2"1"
5
Multi-Hole PlugCharacteristic: linear
Contoured PlugCharacteristic: linear
1.4571
Incorporable seat diameter depends on nominal size DNMaterial / Design
Stroke = 20 mm 40 mm 60 mm
2" 3" 4" 6"1" 1 1/2"Kvs
(m3/h)
withoutSilentpack
withSilentpack standard partial
stellitedsoft
seated
Seatø
100
84
80
67
53
50
42
40
34
25
25
20
16
12
105
130
125
280
12,5
20
22,4
31,5
35,5
90
90
125
224
160
125
100
250
47,5
40
31,5
25
14
180
355
34
67
84
63
16
10
6,3
4,0
25
100
160
1.4122
Incorporable seat diameter depends on nominal size DNMaterial / Design
Stroke = 20 mm 40 mm 60 mm
Seatø
140
125
100
90
63
35,5
25
25
16
10
6,3
4,0
2,5
160
200
280
100
84
80
67
53
50
42
40
34
25
20
20
20
84
105
130
1.4571tenifer treated standard hardened
6"4"3"2"1 1/2"1"Kvs(m3/h)
6
Leakage-class acc. DIN/IEC 534 Teil 4 resp. ANSI/FCI 70-2 - 1991
RLS-DesignCharacteristic: equal percentage / linear
Disk PlugCharacteristic: on / off
1.4571
Incorporable seat diameter depends on nominal size
Stroke = 20 mm 40 mm 60 mm
Material / Design
6”4”3”2”1 1/2”1”
soft seatedstandard
1
1
1
1
1
1
Guideof
plug
100
80
50
40
25
130
Port
Size
200
140
53
35,5
16
400
kvs(m3/h)
The kvs-values will be adapted on the operating conditions !
Plug Type1.4122
RLS 2-step
Incorporable seat diameter depends on nominal size
Stroke = 20 mm 40 mm 60 mm
1” 1 1/2” 2” 3” 4” 6”
Material / Design
standard
1
Guideof
plug
20 - 125
Port
Size
4,0 - 150
kvs(m3/h)
hardened
1.4571tenifertreated
Plug Design Test Medium
Water
Water
Air
Water
Air
Water
Water
Leakage-class acc.DIN/IEC 534
IV
IV-S1
IV-S2
V
VI
IV
III
Test Pressure (bar)
Working Pressure, max. 4
Working Pressure, max. 4
Working Pressure, max. 4
Working Pressure
Working Pressure, max. 4
Working Pressure, max. 4
Working Pressure, max. 4
max. Seat Leakagein % of cvs
0,01
0,0005
0,0001
0,000001
0,0 - bubble-tight
0,01
0,1
metal-to-metal seated
metal-to-metal seated, reseated
soft seated
metal-to-metal seated
metal-to-metal seated
mtm-seated, reseated, heightened seal force
mtm-seated, reseated, heightened seal force
Plug withPressure Balancing
Unbalanced
V-Ring balanced
Piston-Ring balanced
7
Multi-Spring ActuatorActuators are selected for use onFLOWPRO:
Actuator Size Stroke(mm) Spring closes Spring opens
Spring ranges (bar)
PD 252 20
0,1 - 1,0
0,5 - 1,9
1,0 - 2,4
1,5 - 2,7
2,0 - 4,8
0,2 - 1,0
0,5 - 1,9
1,0 - 2,4
1,5 - 2,7
2,0 - 4,8PD 502
20
0,2 - 1,0
0,5 - 1,9
1,5 - 2,7
2,0 - 4,8
40 1,0 - 2,4
20 0,8 - 2,7
PD 700
0,2 - 1,0
0,5 - 1,9
1,5 - 2,7
2,0 - 4,8
40 1,0 - 2,4
20 0,8 - 1,6
PD 1500
0,2 - 1,0
0,4 - 1,2
1,2 - 2,0
1,5 - 2,3
40 0,8 - 1,6
0,2 - 1,5
0,4 - 1,7
1,2 - 2,5
2,2 - 3,8
80 0,8 - 2,1
PD 3000
40 0,8 - 1,6
0,2 - 1,5
0,4 - 1,7
1,3 - 2,6
800,8 - 2,1
8
Product featuresSRI990 Analog Positioner ( direct mounting ! )
Product Specification PSS EVE 0107 A
• Configuration by means of switches and potentiometers• Low air consumption• Supply air pressure up to 6 bar (90 psig)• Attachment to stroke actuators directly or acc. to IEC 534 part 6 (NAMUR)• Protection class IP 65 and NEMA 4X• Explosion protection: EEx ia IIC acc. to CENELEC or
“Intrinsic safety” acc. to FM and CSA• Additional equipments• Integrated inductive limit switches• Gauge attachment• Booster relay
SRD992 Digital Positioner ( direct mounting ! )
Product Specification PSS EVE 0106 A
Technical data same as SRI990 with additional features
• Autostart with self-calibration• Selfdiagnostics• Configuration by means of local keys and LEDs• Position feedback
SRD991 Intelligent Positioner ( direct mounting ! )
Product Specification PSS EVE 0105 A
Technical data same as SRD992 with additional features
• Self diagnostics, status- and diagnostic messages• Communication HART, FoxCom, PROFIBUS-PA or FOUNDATION
Fieldbus H1• Configuration by means of local keys, hand-held terminal, PC or I/A Series
system• Sensors for supply air pressure and output pressure optional• Additional Inputs / outputs
SRP981 Pneumatic PositionerProduct Specification PSS EVE 0101 A
• Input signal range 0,2 - 1,0 bar ( split range up to 4-fold possible )• Independent adjustment of stroke range and zero• Low vibration effect in all directions• Supply pressure up to 6 bar• Single or double-acting• Mounting according to IEC 534, part 6 ( NAMUR )• Electrical limit switches optional• Connection manifold optional• Booster optional
FRS 107 Airset• Max. supply pressure up to 10 bar• Output range 0,3 - 10 bar• Filter 5 µm• Manually operated drain• With gauge
MV - valve ( direct mounting ! )
Tubing• without, by direct mounting• Steel, chromatised• Stainless steel
Any further information see product specifications sheet.
SRD992 Digital Positioner
SRP 981 Pneumatic Positioner
9
Haselhofer-ActuatorActuators are selected for use onFLOWPRO:
Power input ( 230V, 50Hz )
28 W / 32 W
7 W
60 W / 130 W
60 W / 130 W
145 W / 165 W
145 W / 165 W
Voltage
alternatingcurrent
230 V, 50 Hz400 V, 50 Hz
direct current
24 V
Linear actuator
ED 12
ED 20
ED 25
ED 8
ED 4,5
ED 1,2
max. Torque
50 Nm
30 Nm
80 Nm
Connection
acc. to
F10 - ISO 5210 form Atrapezoid thread
24 x 5 left
Linear thrust Unit
LD 12
LD 16
LD 20
Linear thrust UnitThrust Unit selected for use onFLOWPRO:
10
3.2
2.8
3.16
3.13
3.14
2.15
2.6
3.17
2.7
3.15
3.9
3.10
3.11
3.6
3.8
3.4
3.3
3.22
3.21
3.19
3.5
2.4
3.20
1.4
3.1
2.3
3.2
1.2
2.1
2.5
2.2
1.3
1.1
11
Body
Designation MaterialsPart
1.1
Bonnet Gasket 1.2 Pure Grafite 1)
Stud Bolt 1.3
Hex Nut 1.4
Screwed Seat 2.1
Contoured Plug 2.2
Spring Pin 2.3 A2
Stem 2.4 1.4571 Cold-finished
Profil Ring 2.5 Pure Grafite
Hex Nut 2.6 1.4571
Seal Carrier 2.7 1.4571
Profil Ring 2.8
Head Gasket 2.15
Standard Bonnet 3.1
Bottom Ring 3.2 1.4571
PackingBox
3.3 PTFE-Rings
Stuffing Box 3.4
Stud Bolt 3.5
1.4404 ( DN 15 - 100 ) resp. 1.4571 ( DN 150 )
Hex Nut 3.6
Plain Washer 3.8
Hex Nut 3.9
Plain Washer 3.10
Belleville Spring 3.11
Gasket 3.13
Locking Screw 3.14 A2
Head 3.15
Hex Nut 3.16
Stud Bolt 3.17
Distance Ring 3.20 1.4571
Pressure Spring 3.21 1.4310
Plain Washer 3.22 A2
Bellows seal Bonnet
Extension Bonnet
Multi-Hole Plug
Pure Grafite 1)
Pure Grafite
unloaded
Springloaded
Pure Grafite Rings
PTFE/Oel-Rings resp. PTFE/Grafite Core
TDM-seal set
A2-70
A2-70
A2
1.4571
A2
1.4310
Pure Grafite 2)
1) Pure Grafite on Support Plate from 1.44012) Pure Grafite on Support Plate from MYLAR
K Plug SetS Seat SetD Gasket Set
SpareParts
D
S
K
K
K
S
D
D
D
D
DPTFE-Rings
Pure Grafite Rings
1.4581 / A351 CF8M
A2-70
A2-70
1.4571
1.4571
1.4571
A2-70
A2-70
1.4571
1.7357 / A217 WC61.4308 / A351 CF8
G / A2-70
-
-
-
1.5415
-
-
-
1.4571 / 1.4122
1.4571 / 1.4122
-
-
1.0619 / A216 WCB
G
G
1.0460
1.0460
G
G
1.4571 / 1.4122
1.4571 / 1.4122
G / A2-70
12
Pneumatic linear Actuatorwith direct mountig Yoke
Designation
≈ Weight
Area
Stroke
≈H IT
127
- IT
700
ø A
125 250 500 700
ø A
≈ H
kg
mm
mm
20 mm 40 mm 20 mm
405352352265198
40 mm
405
545
46
560
40
455
31
335
16
320
11
550
46
Dimensions
BL Face to Face Dimensions in mm
H2 for Bellows seal Bonnet
Weight for Valves with Standard Bonnet
DesignationNominal Size DN
40 mmStroke = 20 mm
Flanges Drilled and Dimensioned acc. to ANSI B16.5, Form RF or RTJ
Weight for Valves with Extension Bonnet
Weight for Valves with Bellows seal Bonnet
H3 for Extension Bonnet
H1 for Standard Bonnet
≈ W
eigh
tin
kg
≈ H
eigh
tin
mm
≈H1
1" 1 1/2" 2" 3" 4"
60 mm
6"
Class 900 lbs, RF
Class 900 lbs, RTJ
292,1
292,1
333,2
333,2
374,7
377,7
441,5
444,5
511,0
514,1
714,2
717,3
15
18
13 21
22
26
26
27
31
63
65
73
97
100
107
179
184
203
147
327
147
170
331
170
170
331
170
248
555
412
264
555
431
322
735
478
Valve withBellows seal Bonnet
Valve withStandard Bonnet
Valve withExtension Bonnet
≈H2
BL
≈H3
V 7 2 3V 7 2 3V 7 2 3
13
Designation
≈ Weight
LB 20
ø A
≈ H
kg
mm
mm
Linear Unit
Stroke 20 mm 40 mm
Haselhofer - Electric linear Actuator
Linear thrust Unit
60 mm
LB 16LB 12
196
407
20
196
320
17
196
240
12
Pneumatic linear Actuatorwith NAMUR-Yoke
ø A
≈H PB
300
0
≈H PB
150
0
≈H PB
252
- P
B 7
00ø A
Designation
≈ Weight
EB 25
ø A
≈ H
20 mm 20/40 mm 60 mm
216
660
19
184
570
13
216
660
19
184
570
13
145
535
7,5
145
505
6,5
EB 20EB 12EB 8EB 4,5EB 1,2
20 / 40 / 60 mm
kg
mm
mm
Area
Stroke
Designation
≈ Weight
1500
ø A
≈ H
kg
mm
mm
Area
Stroke 20, 40, 60 mm
3000
550
835
115
40, 60 mm
550
1140
145
Designation
≈ Weight
250 500 700
ø A
≈ H
kg
mm
mm
Area
Stroke 20 mm 40 mm 20 mm
405352352265
40 mm
405
60 mm
405
545
46
450
40
420
31
330
16
545
46
600
46
ø A
≈H
ø A
≈H
14
2”V723 DFVNA 900 A216WCB/OO PN1GG 42 46 1.4571
Type Size Class Body./Cert. Plug Seat kvs Trim Actuator S
Packing Box Assembly
PTFE-Rings, adjustable, BAM AGrafite-Rings, adjustable, BAM B
ANSI Class 900 900
Seat Diameter 4 - 130
Nominal Size 1" - 6"
Plug
Contoured plug PContoured plug with Silentpack KDisk plug TPerforated plug LRLS-unit, 2-step, series I A
Form of Connection
Flange acc. to Form RF FANSI B16.5 Form RTJ JSmoothfinish Form RFS U
Bonnet Assembly
Standard Bonnet NBellows seal Bonnet FExtension Bonnet R
Body Material A216 WCBA351 CF8MA217 WC6
Material Certificate
without O .acc. EN 10 204 - 2.2 Z .acc. EN 10 204 - 3.1B B .acc. EN 10 204 - 3.1A A .
Pressure and Leakage Certificate
without . Oacc. EN 10 204 - 2.2 . Zacc. EN 10 204 - 3.1B . Bacc. EN 10 204 - 3.1A . A
1.4571 Plug, Seat-Material1.4122
Bonnet Form
without Pressure Balancing Vwith V-Ring Balancing Owith Piston-Ring Balancing K
Plug Type
standard Nstandard, IEC 534-4 Class IV S1 Epartial stellited Dpartial stllited, IEC 534-4 Class IV S1 Lfull stellited Kfull stellited, IEC 534-4 Class IV S1 Fsoft seated Whardened Htenifer treated T
Characteristic
equal percentage Glinear Lon / off A
equal percentage with Hspecial rangeability
Flow tends to open Valve GFlow tends to close Valve I
0,063 - 400 kvs - Value
15
LB 16 Linear thrust Unit
LB 12 actuating power 10,4 kNLB 16 actuating power 17,3 kNLB 20 actuating power 27,7 kN
EB 8/8 ZPO 50 Positioning Speed
13,5 13,5 mm/min17 17 mm/min25 25 mm/min50 50 mm/min
Positioning Electronics
O withoutM Positioning electronics,
input in mAV Positioning electronics,
input in V
Positioning Feedback
O withoutP 1000 Ω potentiometerM 4 - 20 mA positioning
feedback
Mains Power
Z alternating current230 V, 50 Hz
D alternating current400 V, 50 Hz
G direct current24 V
Haselhofer-Electric linearActuator
EB 1,2/1,2 actuating power 1,2 kNEB 4,5/2 actuating power 2 kNEB 4,5/4,5 actuating power 4,5 kNEB 8/6 actuating power 6 kNEB 8/8 actuating power 8 kNEB 12/12 actuating power 12 kNEB 20/15 actuating power 15 kNEB 20/20 actuating power 20 kNEB 25/25 actuating power 25 kN
AB 204 ZQO
Positioning Feedback
O withoutE 2 add. limit switchesP 1000 Ω potentiometerM 4 - 20 mA positioning
feedbackQ 1000 Ω potentiometer
and 2 add. limit switchesN 4 - 20 mA position feed-
back and 2 add. limitswitches
Mains Power
Z monophase current230 V, 50 Hz
Positioning Electronics
O withoutM Positioning electronics,
input in mAV Positioning electronics,
input in V
PSL-Electric linear Actuator
AB 201 actuating power 1 kNAB 102 actuating power 2 kNAB 202 actuating power 2 kNAB 204 actuating power 4,5 kNAB 208 actuating power 8 kNAB 210 actuating power 10 kN
IT 252 AOZ
Actuator Size
IT 127 Area 125 cm2
IT 252 Area 250 cm2
IT 502 Area 500 cm2
IT 700 Area 700 cm2
PB 700 Area 700 cm2
PB 1500 Area 1500 cm2
PB 3000 Area 3000 cm2
Spring Ranges
A 0,2 - 1,0G 0,4 - xB 0,5 - 1,9M 0,8 - xD 1,0 - 2,4N 1,2 - xV 1,5 - 2,7F 2,0 - 4,8
Hand Wheel
O withoutL top, light-weight-variantS lateral mounted
Operation on air failure
A Stem retractedZ Stem extended
PSS 108294 02/03 V723 e
TM indicates a trade mark of Schmidt Armaturen.Information given in this leaflet is made in god faith and based upon specific testing but does not, however, constitute a guarante.
Modifications without notice in line with technical progress.
Schmidt Armaturen
Zweigniederlassung derFlowserve (Austria) GmbH
Kasernengasse 6A-9500 Villach
Telephone: +43 (0) 4242 41181-0Facsimile: +43 (0) 4242 41181-50 or 51
e-mail: [email protected]
Regional Headquarters
Flowserve
1350 N. Mt. Springs Prkwy.Springville, UT 84663USA
Telephone: +1 801 489 8611Facsimile: +1 801 489 3719
Flowserve
12 Tuas Avenue 20
Republic of Singapore 638824
Telephone: +65 862 3332Facsimile: +65 862 4940
Flowserve
Manderscheidstr. 1945141 EssenGermany
Telephone: +49 (0) 201 89195Facsimile: +49 (0) 201 8919662
Flowserve
Van Leeuwenhoekweg 63225 LX HellevoetsluisNetherland
Telephone: +31 (0) 181 330044Facsimile: +31 (0) 181 330040
Flowserve
12, Av. du Québec91965, Courtaboeuf CedexFrance
Telephone: +33 (0) 1 60 923 251Facsimile: +33 (0) 1 60 923 299
Flowserve
Station RoadPershore, WorcestershireEngland WR102BZ
Telephone: +44 (0) 1386 554551Facsimile: +44 (0) 1386 554968
Main Sales Offices (Europe, Middle East, Africa)
Flowserve
Burrell RoadHayward Heath, West SussexEngland
Telephone: +44 (0) 1444 314400Facsimile: +44 (0) 1444 314401
Flowserve
c/o Saleh & Abdulaziz AbahsainP.O. Box 209Al Khobar 31952Saudi Arabia
Telephone: 9663 857 3442Facsimile: 9663 859 5284
Flowserve
Units 1 and 226, Imvuba Road, Sebenza Ext 6Edenvale, GautengEdenglen 1613South Africa
Telephone: +27 11 609 2094Facsimile: +27 11 609 3735
Flowserve
Allee du Quartz 12300 La-Chaux-de FondsSwitzerland
Telephone: +41 (0) 32 925 9700Facsimile: +41 (0) 32 926 5422
Flowserve
Via Prealpi 3020032 Cormano (MI)Italy
Telephone: +39 02 663251Facsimile: +39 02 6151863
Flowserve
Kasernengasse 69500 VillachAustria
Telephone: +43 (0) 4242 41181-0Facsimile: +43 (0) 4242 4118150