Schlosser-Pfeiffer Radialpresse englisch
8
RADIAL PRESS
description
Radial PressThe High Speed Machine for High End PerformanceThe SP RADIALPRESS is a high-speed, high-performance machine for the manufacturing of concrete pipes in the diameter range i.d. 250 mm up to i.d. 2000 mm and lengths of up to 3.5 m. It is ideal for the production of reinforced and non-reinforced bell end pipes, jacking pipes and rocker pipes, pipes with two spigot ends, as well as manhole pipes, manhole rings and manhole bases.The concrete is compacted during the course of the radial pressing process. The pressing action is effected by the rotating pressing tool consisting of the distributor head, which rotates in the opposite direction of the pressing head. As a result, the torques of distributor head and pressing head largely cancel each other out, hence ensuring a precise and tension-free embedding of the reinforcement. The machine is controlled by a Siemens S7 electronic PLC. The pipe production is fully automatic.
Transcript of Schlosser-Pfeiffer Radialpresse englisch
RADIAL PRESS
Radialpresse_8 Seiten_D_R.indd 1 16.04.2007 09:41:20
RADIAL PRESS
The SP RADIALPRESS is a high-speed, high-perfor- mance machine for the manufacturing of concrete pipes in the diameter range i.d. 250 mm up to i.d. 2000 mm and lengths of up to 3.5 m.
It is ideal for the production of reinforced and non-reinforced bell end pipesjacking pipes and rocker pipes
pipes with two spigot ends, as well as manhole pipes, manhole rings and manhole bases
The concrete is compacted during the course of the radial pressing process. The pressing action is effected by the rotating pressing tool consisting of the distribu-tor head, which rotates in the opposite direction of the pressing head. As a result, the torques of distributor head and pressing head largely cancel each other out, hence ensuring a precise and tension-free embedding of the re-inforcement. The machine is controlled by a Siemens S7 electronic PLC. The pipe production is fully automatic.
SP RADIALPRESS RP 830, fully automated, with forklift operation
The High Speed Machine for High End Performance
Radialpresse_8 Seiten_D_R.indd 2 16.04.2007 09:41:29
The following modular concepts are available for the off-bearing and handling of the finished pipes inside the mould:
SP RADIAL PRESS + forklift truckSP RADIAL PRESS + craneSP RADIAL PRESS + demoulding robot + evacuation robotSP RADIAL PRESS + demoulding robot + evacuation robot + moving floor system
The level of automation can be upgraded step by step, at the desired pace, through addition of fully automated peripheral equipment like a pallet handling line, a rein-forcement cage feeding system, and a pipe testing line.
Product Handling
RADIAL PRESS RP 1235, fully automated, for forklift operation
Demoulding by forklift
Radialpresse_8 Seiten_D_R.indd 3 16.04.2007 09:42:05
Optionally available equipment
Height-adjustable working table for the manufacture of short length pipes and manhole elements or gene-rally for easier maintenanceSpigot forming ring, rotation 360 degrees Remote service and maintenanceAdditional cooling for specific countriesHopper weighing
Frequency control for the vibrating unit of the bell-end compactor Special equipment kit for the production of com-pound pipes (SP patent)Automatic anchor position deviceAdditional quality monitoring by video camera
RADIAL PRESS
Bell-end compactor with synchronised vibrators and rotating vibrating plateOffbearing of pipes by forklift
RADIAL PRESS RP 1235 RADIAL PRESS RP 1635
Radialpresse_8 Seiten_D_R.indd 4 16.04.2007 09:42:38
Extremely high reliability and long life at minimal wearVery low noise level thanks to SP’s special compacting processSeparately controllable drives for distributor head and pressing headExtremely simple and user-friendly operation, outstanding reli-ability and ease of maintenanceFully-automated productionHigh drive power for superior quality products, including so-phisticated products like jacking pipes, thick-walled, reinforced pipes with multiple-reinforcement and the processing of difficult aggregatesThe high-performance electro-hydraulic drive unit of the press-ing tools replicates the typical characteristic curve of a radial press to perfection, for maximum process capacity at minimum energy consumption..
Special Characteristics of the SP RADIAL PRESS
Pressing tool
Double-acting cage centring unit (BZE)
Bell-end compactor with synchronised vibrators and rotating vibrating plate
Pressing tool, reinforcing cage and cage centring unit BZE (replication)
Radialpresse_8 Seiten_D_R.indd 5 16.04.2007 09:42:47
RADIAL PRESS
Model ranges: RP830
RP1235
RP1635
RP2035
for effective pipe lengths up to 3.5m
Production output in 8 hrs/2.5m pipe length*:
i.d. 300mm pipe diameter – up to 250 pipes
i.d. 800mm pipe diameter – up to 185 pipes
i.d. 1,200mm pipe diameter – up to 160 pipes
*) Production output depends on the machine equipment and the aggregates used
Type: SP RADIALPRESS
Technical characteristics:
Radialpresse_8 Seiten_D_R.indd 6 16.04.2007 09:43:34
H2
H1
A
BL
B
Development - Design & Engineering - Manufacture
Our machines are developed and designed using state-of-the-art 3D CAD/CAE systems. The materials and compo-nents used in the manufacture of our machines and plants are selected to meet the strictest quality requirements and are quality-checked on a regular basis by in-house quality audits.
Our machine components are manufactured from cer-tified steel qualities, using CNC welding, milling and drilling technologies. The resulting machines and plants are characterised by low manufacturing tolerances and a correspondingly high quality standard.
Model RP 830 RP 1235 RP 1635
BL 3,0m 3,5m 3,5m
B 1900 2400 2800
A 2700 3100 3500
T 2240 2340 2540
H1 6250 6735 7200
H2 10600 11900 12500
Radialpresse_8 Seiten_D_R.indd 7 16.04.2007 09:44:37
We put concrete into shape
SCHLOSSER-PFEIFFER GmbHScheidertalstrasse, Tor 4D-65326 Aarbergen
Telephone: +49 (0) 6120 282901Fax: +49 (0) 6120 282931E-Mail: [email protected]: www.schlosser-pfeiffer.com
RA
D_0
407_
EN1
Radialpresse_8 Seiten_D_R.indd 8 16.04.2007 09:44:45
