SCHEMATIC FLOW CHART FOR PRODUCTION OF WM … Ø90mm~Ø100mm is applicable where min 500 denier PP...
Transcript of SCHEMATIC FLOW CHART FOR PRODUCTION OF WM … Ø90mm~Ø100mm is applicable where min 500 denier PP...
SCHEMATIC FLOW CHART FOR PRODUCTION OF PP/PE WOVEN SACKS, CEMENT BAGS
(Split by heat)
PP/HDPE Resin
Tubular Woven Web
Printed Tube Printed Tube
Kraft-Paper Web
Sandwiched Wed Film-Coated Web
Flat Woven Web
J&T FLAT YARN MAKING M/C
J&T CIRCULAR WEAVING M/C
Pigments Additive
J&T PP/PE EXTRUSION COATING M/C(LAMINATOR)
Reel To Reel Printing Machine
J&T AUTO-CONVERTER
J&T AUTOMATIC TUBING& PRINTING M/C
J&T AUTOMATIC VALVEFORMING & ENDS SEWING M/C
MIXER
Laminating
Yam MakingFeed Stock
Weaving
Converting
Products Tubular Sacks Multiply Laminated Sacks Laminated Sacks
Yarn Package For Warp Yarn Package For Weft
WM STANDARD SPECIFICATION
Company Address: No.56, Chenggong St., Minsyong Township, Chiayi County 62157, TaiwanFactory Address:No.22, Shansi Rd., Gangshan Dist., Kaohsiung City 82056, TaiwanTEL: 886-7-6281118 FAX: 886-7-6281210Website: www.china-poly.com.tw E-mail: [email protected]
Specifications are subject to change without previous notice; above is for reference only, the update please refer to quotation specified.
SPECIFICATION MODEL WM-4/80 WM-6/100 WM-6/125 WM-6/150 WM-8/155 WM-8/215
Max. Shuttle Speed (RPM) 190 160 150 140 130 110
No. of Shuttle (Set) 4 6 6 6 8 8
Max Weft Inserting Speed (PPM) 760 960 900 840 1040 880
Weft Density (P/in) 8-14 8-14 8-14 8-14 8-14 8-14
Lay Flat Width (cm) 45-80 48-95 70-120 90-135 95-150 170-220
Dia. of Web-Roll (mm) Ø1200 Ø1200 Ø1200 Ø1200 Ø1200 Ø1200
Warp Creel (Bobbin) 720 720 864 1152 1152 1826(2600)
Warp Tube (mm) ID Ø21-Ø35mm x OD Ø23-Ø38m/m x 215-230m/m L
Max. Warp Package (mm) 120m/m(OD) x 230m/m(L)
Weft Tube (mm) ID Ø21-Ø35mm x OD Ø23-Ø38m/m x 215-230m/m L
Max. Weft Package (mm) 90 mm 100 mm 100 mm 100 mm 100 mm 110 mm
Main Motor (with Inverter) (HP) 5.0 HP 5.0 HP 5.0 HP 7.5 HP 7.5 HP 10(15) HP
Layout Space, L x W x H (m) 9.5 x 2.3 x 2.6 9.5 x 2.3 x 2.6 10.5 x 2.8 x 3 11 x 3 x 3.3 11 x 3 x 3.3 12 x 3.6 x 4.3
FOR PP/PE WOVEN FABRICSWM CIRCULAR LOOM
www.china-poly.com.tw
The sophisticated shuttles were made by highly-precision CNC machine center and accurate mold to assure the unity and quality of assembly. Also, we replaced the traditional slide plate to a new dust-proof ball bearing. Furthermore, WM circular loom installed with standard weft compensation device (which will not pre-stop before weft yarn broken or out of supply). (Pre-stop: when weft yarn broken or out of supply, machine stop running to avoid the tail of weft yarn cutting and breaking the warp yarn.) Weft Bobbin size Ø90mm~Ø100mm is applicable where min 500 denier PP yarn produces woven cloth with the same high speed.
The application of rotating wheel shuttle and energy saving inverter has lower 40% of power consumption than before. While loom runs 150 RPM, it only takes 4 to 5 amperes (WM6/100) that leads to more energy saving and higher speed of production. Meanwhile, we also select AC motor to assemble in cloth winder device. It reduces the possibility of breakdown on motor controller. Therefore, using AC motor can simplify the adjustment of tension but improve the quality of cloth winder and efficiency of production.
PRECISE SHUTTLE & AUTOMATIC WEFT COMPENSATION
ELECTRICITY SAVING & NIL BREAKDOWN OF CIRCUIT
OPTIONALEQUIPMENT
WM-6/100
01 PLC Control System02 PLC Control System03 Auto Oil Feeding Device04 Warp Feeding Device
01 02
WM-6/125
PLC CONTROL BOX (OPTIONAL)
03 04