schede LATITUDE A4TREAD BUILDER Builder developed for the cold retreading industry and designed to...
Transcript of schede LATITUDE A4TREAD BUILDER Builder developed for the cold retreading industry and designed to...
TREAD BUILDERBuilder developed for the cold retreading industry and designed to apply pre-cured tread strips on truck, bus and light transport vehicle tyre casings. It is equipped with a support for application of calendered cushion gum and an automatic rotating knife to cut the pre-cured tread strips.The machine can be tread roll lifting system provided.
KEY FEATURES• For tyres from 15” to 24”, including 445/65R22,5”
• Expandable chuck unit driven centrally with gearbox motor
• Automatic stitching cycle (Radial stitching)
• Limit switch for automatic tread length control
• Foot pedal that controls tyre rotation in both directions for manual cushion gum application
• Rotating knife integrated in the machine
• Crank for poly removal
• Full tread rolls lifting system
• Automation components Rockwell
3552
1548
3552
1548
LAYOUT
(image just for illustrative purposes the machine may have different configurations)
Shamrock marketing, inc11206 Bluegrass parkway - louisville, ky 40299 - [email protected] - www.Shamrockmarketinginc.Com
TECHNICAL DATAPower Supply Voltage 400/460 V - 50/60 Hz
Total installed power 5kW
Tyre diametermin. 600 mm - 23,6’’max. 1260 mm - 49,6’’
Tread widthmin. 160 mm - 6,3’’max. 460 mm - 18,1’’
Bead diameter min. 15’’ – max. 24’’
Air supply pressure 8 bar (120 psi)
Width 71 inches
Height (from the floor) 83 inches
Length 138 inches
Weight 4.000 pounds
OPTIONAL:• Tread roll lifting system
TREAD BUILDER