Scanlan Catalog
-
Upload
anna-sucharska -
Category
Documents
-
view
756 -
download
57
description
Transcript of Scanlan Catalog
1
2
3
4
5
6
7
8
9
10INCHES
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25CM
For more information or to place an order,
please contact your local Scanlan representative, or call...
U.S. & Canada: 800-328-9458 International: 651-298-0997FAX: 651-298-0018www.scanlaninternational.com
MK-CAT-2012 © 2012 Scanlan International, Inc.ONE SCANLAN PLAZA • SAINT PAUL, MINNESOTA 55107 • U.S.A.
800-328-9458 • 651-298-0997 • FAX 651-298-0018 • www.scanlaninternational.com
TimScanlan
BrigidScanlan Eiynck
Adam Scanlan
RussellScanlan
JosephScanlan
RonPeick
Dear Customer,
The Scanlan family has specialized in the design and manufacture of the highest quality surgical products since 1921. Now in our fourth generation, my family continues its dedication to providing you with the best surgical instrumentation available anywhere in the world.
This catalog is a composite of our instruments and single-use products. However, it is difficult to offer you a completely up-to-date catalog because, even as you are reading this, we are designing and refining even more unique and innovative products to serve you and, ultimately, your patients.
In the years ahead, we will continue to listen and serve you as personally as we have since our inception, with the vigor of the young, growing, and dynamic company that we are.
If I can ever be of assistance to you, please call me toll-free within the United States or Canada, or collect from anywhere in the world. Thank you for your continued support and demand for the finest.
Sincerely,
Timothy M. ScanlanPresidentChief Executive Officer
TAB
LE O
F C
ON
TEN
TS
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
1. NEW SCANLAN® Premier™ Jacobson Micro Spring Style Scissors .................... 1.1 SCANLAN® Titanium Needle Holders ................................................... 1.3 Nitinol Dilators......................................................................................... 1.4 Thoracoscopic ........................................................................................ 1.5 Reliance Bulldog Applier / Introducer, Clamps........................................ 1.8 Sterilization Tray .................................................................................... 1.10 Easy-Tag™ with Custom Printing ........................................................... 1.11 SURG-I-BAND® Color Coding with Data Matrix ..................................... 1.12 Prep-MARK Surgical Skin Markers........................................................ 1.12
2. CLAMPS Titanium Micro Vascular........................................................................... 2.1 Titanium Medium / Large Vascular .......................................................... 2.8 Titanium Specialty ................................................................................. 2.12 Micro Vascular ....................................................................................... 2.13 Medium Vascular .................................................................................. 2.16 Large Vascular ...................................................................................... 2.24 Haemostats............................................................................................ 2.31 Specialty ................................................................................................ 2.40
3. FORCEPS Titanium Round Handle — Micro ............................................................. 3.1 Titanium Flat Handle ............................................................................... 3.9 Micro Tips / Round Handle ................................................................... 3.12 Gerald .................................................................................................... 3.15 DeBakey ............................................................................................... 3.17 General / Fine to Medium Tips.............................................................. 3.19 Specialty ................................................................................................ 3.22
4. NEEDLE HOLDERS Titanium Spring Style Needle Holders ..................................................... 4.1 Titanium Ring Handle Needle Holders ................................................. 4.10 Spring Style Needle Holders................................................................. 4.14 Ring Handle Needle Holders ................................................................ 4.23
5. SCISSORS Spring Style – Micro................................................................................. 5.1 Ring Handle .......................................................................................... 5.17 6. SPECIALTY Temporary Occlusion Clips / Forceps ...................................................... 6.1 Sundt™ Graduated Suction System ........................................................ 6.6 SCANLAN® Caliper / Knife Blade Tool .................................................... 6.8 SCANLAN® MEMORY Instruments ........................................................ 6.9 Vascular Dilators ................................................................................... 6.10 Dissectors / Plaque Removers ............................................................. 6.12 Chest Tube Passer ............................................................................... 6.14 Phlebectomy Hooks .............................................................................. 6.14 Valvulotomes ........................................................................................ 6.15 Aorta / Vein Punches (Re-useable) ...................................................... 6.15 Bipolar Forceps...................................................................................... 6.16 Hand-Held Retractors ........................................................................... 6.17 Self-Retaining Retractors...................................................................... 6.18 Puskas™ Coronary Instrument Sets ...................................................... 6.20 Endartectomy Sets ............................................................................... 6.26 Samson Phlebectomy Set .................................................................... 6.30
Celebrating Success
1920
1960
1930
1970
2000
1940
1980
1950
1990
1921Dennis R. Scanlan, Sr., brings ″non-rustable″ stainless steel from Sweden to the United States for use in the manufacture of ice skate blades and surgical instruments.
1961Surg-I-Band™ color coding is invented, beginning a new era of single-use and instrument care products.
1998Scanlan International works in cooperation with industry-leading robotic manufacturers to develop state-of-the-art instrumentation for new robotic surgical systems for use in minimally-invasive heart surgery.
1999 Scanlan International develops a new focus for Neurosurgical products working with industry leading surgeons.
2010 Scanlan International continues the development of new Thoracoscopic and Minimally Invasive instrumentation. Designed with traditional handles, these instruments allow small incision access within the Cardiac/Vascular and Thoracic arenas.
2005 Scanlan International proudly celebrates 85 years of excellence in the design and manufacture of surgical products.
1968Tim Scanlan, D.R. Scanlan, Jr.’s son, joins the company and expands the instrument line, setting up a worldwide distribution network.
1970Scanlan International offers the world’s medical community its latest invention, the new Aortic Vein Punch, for use in coronary bypass.
1975The new Diamond Dust™ texture is developed to meet the need for an instrument tip surface that would provide surgeons with definite control without trauma to tissue or damage to needles.
1980Scanlan International begins offering complete medical packaging services, combining its U.S. facilities with a new office in Amsterdam.
1980Scanlan International develops the world’s first single-use aortic vein punch.
1997Working with world-renowned cardiovascular surgeons, Scanlan International begins to develop innovative designs and concepts for minimally-invasive surgical instruments.
1923Dr. William J. Mayo works in collaboration with Dennis R. Scanlan, Sr., to design and manufacture the first Mayo surgical scissors.
1925Dennis R. Scanlan, Sr., makes the first Crile forceps for Dr. George W. Crile at the Cleveland Clinic.
1930Dennis R. Scanlan, Sr., convinces Walter Chrysler to use stainless steel for the roof of the new Chrysler Building in New York.
1935Dennis R. Scanlan, Sr., works in collaboration with Dr. Harvey Cushing to create neurosurgical instrumentation.
1937Dennis R. Scanlan, Sr., invents the portable iron lung for use in the treatment of polio patients.
1946Upon returning from England, where he served as Captain in the 8th Air Force, D.R. Scanlan, Jr., began work with his father to design and manufacture new surgical instruments, as well as single-use and instrument care products.
1950sThe Scanlans work closely with Dr. C. Walton Lillehei and others at the newly founded heart surgery program of the University of Minnesota.
Into The Future...Scanlan International continues to be recognized across
the world as the premier manufacturer of the highest quality surgical instruments.
"Our instruments must be the best in the world." D.R. Scanlan, Sr.
"Scanlan instruments must fit each surgeon’s hand." D.R. Scanlan, Jr.
"We must remember why we make our products: To improve the quality of life." Timothy M. Scanlan
Celebrating Success Since 1921
Use your Smart Phone and QR Reader software to photograph the code below to watch a video on the History of Scanlan International.
7. THORACOSCOPIC Clamps ..................................................................................................... 7.1 Forceps .................................................................................................. 7.12 Needle Holders ..................................................................................... 7.14 Scissors ................................................................................................. 7.20 Suction ................................................................................................... 7.22 Biopsy Forceps ...................................................................................... 7.25 Specialty ................................................................................................ 7.26
8. NEUROSURGICAL Biopsy Needle......................................................................................... 8.1 Dura Closure Set .................................................................................... 8.2 LEGACY Titanium Forceps..................................................................... 8.3 Loftus™ ACDF Distractor ......................................................................... 8.4 SCANLAN® SuperCut™ Microsurgical Knives ......................................... 8.5 Titanium Instrumentation ........................................................................ 8.6 SCANLAN® Micro Instrumentation ........................................................ 8.21 Forceps ................................................................................................. 8.23 Needle Holders ..................................................................................... 8.32 Abdulrauf™ EC/IC Set ........................................................................... 8.37 Scissors ................................................................................................ 8.39 Sundt™ Suction ..................................................................................... 8.48 Carotid Instrumentation ........................................................................ 8.50 Temporary Occlusion Clips ................................................................... 8.58 Micro Dissectors ................................................................................... 8.61
9. INSTRUMENT CARE Color Coding ............................................................................................ 9.1 EASY-TAG™ Tracking System ................................................................. 9.5 Instrument Tip Protectors......................................................................... 9.6 Demagnetizer ......................................................................................... 9.8 TRAVELER™ Autoclavable Pouch .......................................................... 9.8 Sterilization Trays ................................................................................... 9.9
10. SINGLE USE Aorta / Vein Punches ............................................................................ 10.1 Graft Markers ........................................................................................ 10.1 Vascular Tunneling ............................................................................... 10.2 VASCU-STATT® Bulldog Clamp System ............................................... 10.4 Silicone Loops ....................................................................................... 10.8 Clamp and Jaw Covers......................................................................... 10.9 Microsurgical Knives ............................................................................. 10.9 Pin Protectors ..................................................................................... 10.10 Suture Boots ....................................................................................... 10.10 Suture Tags ......................................................................................... 10.11 Vein Holders ....................................................................................... 10.11 Surgical Skin Markers ......................................................................... 10.11 11. INDEX
12. WARRANTY 13. CARE AND MAINTENANCE
TAB
LE O
F C
ON
TEN
TS
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
Use your Smart Phone and QR Reader software to photograph the code below which will take
you to this section on the Scanlan Website
SCANLAN® Premier™ Jacobson Micro Spring Style Scissors 1.1SCANLAN® Titanium Needle Holders LEGACY . . . . . . . . . . . . 1.3NITINOL DILATORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.4THORACOSCOPIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5 D'Amico Mediastinoscopy Biopsy Forceps . . . . . . . . . . . . . . 1.5 Foerster Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.6RELIANCE BULLDOG APPLIER / INTRODUCER, CLAMPS. . 1.8STERILIZATION TRAY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.10EASY-TAG™ with Custom Printing . . . . . . . . . . . . . . . . . . . . . 1.11SURG-I-BAND® Color Coding with Data Matrix . . . . . . . . . . . 1.12PrepMARK™ Surgical Skin Markers . . . . . . . . . . . . . . . . . . . . 1.12
NE
Wht
tp://
ww
w.s
canl
anin
tern
atio
nal.c
om/n
ew-p
rodu
cts/
1
2
3
4
5
6
7
8
9
10
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
INCHES CM
NE
Wht
tp://
ww
w.s
canl
anin
tern
atio
nal.c
om/n
ew-p
rodu
cts/
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Cat. No. DescriptionNEW 7007-440-8 25° angled blades, 8″ (20 cm)
NEW 7007-442-8 45° angled blades, 8″ (20 cm)
NEW 7007-444-8 60° angled blades, 8″ (20 cm)
NEW 7007-446-8 90° angled blades, 8″ (20 cm)
7007-449-8 V-neck, 125° angled blades, 8″ (20 cm)
n SCANLAN® Premier™ Jacobson Micro Scissors, Flat Handle, Angled Micro Fine Blades
60º Angled Blades
25º Angled Blades
45º Angled Blades
90º Angled Blades
V-Neck 125º Angled Blades
7007-440-8
Instrument blades are shown approximate size
7007-440-8
Spring Style n Flat Handle n Angled Blades
NE
Wht
tp://
ww
w.s
canl
anin
tern
atio
nal.c
om/n
ew-p
rodu
cts/
1.1
3003-344
Straight Jaws - Streamline Box LockRecommended suture size: 3-0 and smaller
Cat. No. DescriptionNEW 3003-362 With ratchet, 7″ (18 cm)
NEW 3003-364 With ratchet, 8″ (20 cm)
NEW 3003-366 With ratchet, 9″ (23 cm)
NEW 3003-368 With ratchet, 10″ (25.4 cm)Instrument jaws are shownapproximate size
Cat. No. DescriptionNEW 3003-342 With ratchet, 7″ (18 cm)
NEW 3003-344 With ratchet, 8″ (20 cm)
NEW 3003-346 With ratchet, 9″ (23 cm)
NEW 3003-348 With ratchet, 10″ (25.4 cm)
n SCANLAN® LEGACY Needle Holders, 10 mm Diameter Extended Knurling, DIAMOND DUST™ Jaws, Round HandleStraight Jaws - Regular Box LockRecommended suture size: 7-0 and smaller
Instrument jaws are shownapproximate size
StraightDIAMOND DUST™ Jaws
Cat. No. DescriptionNEW 7007-490-8 25° angled blades, 8″ (20 cm)
NEW 7007-492-8 45° angled blades, 8″ (20 cm)
NEW 7007-494-8 60° angled blades, 8″ (20 cm)
NEW 7007-496-8 90° angled blades, 8″ (20 cm)
7007-499-8 V-neck, 125° angled blades, 8″ (20 cm)
n SCANLAN® Premier™ Jacobson Micro Scissors, Round Handle, Angled Micro Fine Blades
60º Angled Blades
25º Angled Blades
45º Angled Blades
90º Angled Blades
V-Neck 125º Angled Blades
7007-490-8
Instrument blades are shown approximate size
7007-490-8
NE
W
NE
W
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/new
-pro
duct
s/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/new
-pro
duct
s/
1.31.2
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Titanium n Needle Holder n Spring Style n Round Handle n LEGACYSpring Style n Round Handle n Angled Blades
n D'Amico Mediastinoscopy Biopsy Forceps, Ring Handle Developed in cooperation with Thomas A. D’Amico, MD
Cat. No. Description Shaft
Working Length
Total Length
NEW 9009-300 6 mm width oval ring jaw, with ratchet 7 mm 11"(28 cm)
15"(38 cm)
NEW 9009-301 6 mm width oval ring jaw, without ratchet 7 mm 11"(28 cm)
15"(38 cm)
NEW 9009-310 7 mm width oval cupped jaws, with ratchet 7 mm 11"(28 cm)
15"(38 cm)
NEW 9009-311 7 mm width oval cupped jaws, without ratchet 7 mm 11"(28 cm)
15"(38 cm)
9009-311
6 mm Oval Ring Jaw(9009-300 and 9009-301)
7 mm Oval Cupped Jaws(9009-310 and 9009-311)
8008-478
n SCANLAN® Memory Garrett Vascular Dilators, 5 1/2" (14 cm)
n SCANLAN® Memory Garrett Vascular Dilators, 8 1/4" (21 cm)
n SCANLAN® Memory Graduated Vascular Dilators, 8 1/4" (21 cm)
Cat. No. DescriptionNEW **8008-448A 0.5 mm
NEW **8008-448B 1.25 mm
NEW **8008-448C 1.75 mm
NEW **8008-452 1 mm
NEW **8008-454 1.5 mm
NEW **8008-456 2 mm
NEW **8008-458 2.5 mm
NEW **8008-460 3 mm
NEW **8008-462 3.5 mm
NEW **8008-464 4 mm
NEW **8008-466 4.5 mm
NEW **8008-468 5 mm
Cat. No. DescriptionNEW **8008-493 1/1.5 mm
NEW **8008-494 1.5/2 mm
NEW **8008-495 2/2.5 mm
Cat. No. DescriptionNEW **8008-449A 0.5 mm
NEW **8008-449B 1.25 mm
NEW **8008-449C 1.75 mm
NEW **8008-472 1 mm
NEW **8008-474 1.5 mm
NEW **8008-476 2 mm
NEW **8008-478 2.5 mm
NEW **8008-480 3 mm
NEW **8008-482 3.5 mm
NEW **8008-484 4 mm
NEW **8008-486 4.5 mm
NEW **8008-488 5 mm
Instrument tips are shown approximate size
Nitinol is a metal alloy which is flexible and has shape memory. This means that the nitinol portion of the instrument can be bent by the user to a desired curved shape for use. The instrument will return back to its original shape when exposed to a temperature of 60°C - 90°C (140° - 194°F). Steam autoclaving exceeds this temperature and is the recommended method to return the nitinol portion of the instrument back to the original shape.
NE
W
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/new
-pro
duct
s/
1.5
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
NE
W
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/new
-pro
duct
s/
1.4
D'Amico Mediastinoscopy Biopsy Forceps n Ring HandleNitinol Dilators
n Foerster Clamps
Instrument jaws are shownapproximate size
9909-923
Cat. No. Description Shaft
Working Length
Total Length
NEW 9909-923 Deep curve left 20 mm oval ring jaws, with ratchet 10 mm 9 1/2" (24 cm)
13" (33 cm)
20 mm Oval Ring Jaws, Deep Curve(9909-923)
Curved Left 12 mm Oval Ring Jaws(9009-228)
Curved Right (Left-Hand Style) 12 mm Oval Ring Jaws(9009-227)
Curved Left 20 mm Oval Ring Jaws(9909-922)
Curved Right (Left-Hand Style) 20 mm Oval Ring Jaws(9909-921)
n Foerster Clamps
Cat. No. Description Shaft
Working Length
Total Length
NEW 9009-227 Curved right (left-hand style) 12 mm oval ring jaws, with ratchet
7 mm 7 1/2" (19 cm)
11 1/2" (29 cm)
NEW 9009-228 Curved left 12 mm oval ring jaws, with ratchet 7 mm 7 1/2" (19 cm)
11 1/2" (29 cm)
NEW 9909-921 Curved right (left-hand style) 20 mm oval ring jaws, with ratchet
10 mm 7 1/2" (19 cm)
11 1/2" (29 cm)
NEW 9909-922 Curved left 20 mm oval ring jaws, with ratchet 10 mm 7 1/2" (19 cm)
11 1/2" (29 cm)
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
NE
W
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/new
-pro
duct
s/
1.7
NE
W
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/new
-pro
duct
s/
1.6
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Clamps n Lung Grasping n Foerster ClampThoracoscopic Clamps n Lung Grasping n Foerster Clamp
9909-922
Cat. No. DescriptionNEW ** 3795-50 25 mm straight DeBakey Jaws, 2″ (5 cm)
NEW ** 3795-51 25 mm curved DeBakey Jaws, 2″ (5 cm)
NEW ** 3795-54 7 mm straight DeBakey Jaws, 1 1/4″ (3.2 cm)
NEW ** 9999-50 Starter Pack includes 4 Bulldogs (3795-50) and 1 sterilization tray (2133-03)
n Reliance Bulldog Clamp
3795-51
3795-54
3795-50
Cat. No. Description ShaftWorking Length
Total Length
NEW 9009-395 SCANLAN® Reliance Bull Dog Applier / Introducer straight
7 mm 13 3/4″ (35 cm) 17 1/3″ (44 cm)
n Reliance Bulldog Applier / Introducer
9009-395
Instrument jaws are shownapproximate size
Instrument jaws are shownapproximate size
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
NE
W
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/new
-pro
duct
s/
1.9
NE
W
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/new
-pro
duct
s/
1.8
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Reliance Bulldog Applier / Introducer Reliance Bulldog Clamps
Cat. No. Description
NEW * 1001-904C EASY-TAG™, Black
NEW * 1001-905C EASY-TAG™, Red
NEW * 1001-906C EASY-TAG™, Yellow
NEW * 1001-907C EASY-TAG™, Blue
NEW * 1001-908C EASY-TAG™, Green
NEW * 1001-909C EASY-TAG™, Pink
Now you can customize your EASY-TAG™ Tracking System to meet the unique needs within your hospital. Simply define your message, and we do the rest! Your custom print EASY-TAG™ will be developed and printed to your specific needs.
Your custom message, combined with the unique advantages of the EASY-TAG™ Tracking System, offers a powerful combination – providing a cost-effective, secure method of tracking instruments, trays, equipment & repairs through cleaning, decontamination and sterilization processes.
Approximately 250 Tags per spool2.5″ x 4.75″(63.5 mm x 120.65 mm) Elastomer Handle Polymer Tag
2146-03
Cat. No. Description Capacity
NEW ** 2146-03 SCANLAN® Thoracoscopic VATS / MIS Sterilization Tray, aluminum, silver-gray color, additional tray insert with full silicone mat, 10.25" x 21.75" x 4" (26 cm x 55.2 cm x 10 cm)
20+ VATS / MIS Instruments
Note: All trays are steam, flash (immediate use), ETO, and plasma sterilization compatible.
n Sterilization Tray
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
NE
W
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/new
-pro
duct
s/
1.11
NE
W
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/new
-pro
duct
s/
1.10
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Custom EASY-TAG™Sterilization Trays n Metal
• Economy – Each spool contains 200 unique bar codes
• 14 colors – For fast and easy identificaiton• Durable – resistant to flaking, chipping, peeling
and cracking through multiple sterilization cycles• Trouble Free – Easy application and removal
without damaging instrument• Sterilizable – Tested for steam, gas and
flash (immediate use) sterilization• 1/4″ Width• Latex-safe
Cat. No. Description
NEW 1001-1084 Red
NEW 1001-1085 Yellow
NEW 1001-1086 Orange
NEW 1001-1087 Blue
NEW 1001-1088 Green
NEW 1001-1089 Brown
NEW 1001-1090 White
Cat. No. Description
NEW 1001-1091 Black
NEW 1001-1092 Glo-Orange
NEW 1001-1093 Purple
NEW 1001-1094 Lime Green
NEW 1001-1095 Grey
NEW 1001-1096 Pink
NEW 1001-1097 Light Blue
SURGICAL SKIN MARKERS
Available in gentian violet with regular tip, SCANLAN® PrepMARK™ surgical skin markers are made with a unique scrub-resistant ink and ideal for marking, identifying, coding, and contouring the surgical area. Radiopaque and latex-safe.
Regular Tip Cat. No. Description
NEW 1001-730 PrepMARK™ Surgical Skin Marker, Sterile, plus ruler, Box of 50 One per sterile package with ruler 50 per box
NEW 1001-731 PrepMARK™ Surgical Skin Marker, Non-Sterile, plus ruler, Container of 50
Use your Smart Phone and QR Reader software to photograph the code below which will demonstrate the use of the Surg-I-Band® DM.
Available 2013
Available 2013
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
NE
W
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/new
-pro
duct
s/
1.12
Surg-I-Band® Color Coding Data Matrix
CLA
MP
Sht
tp://
ww
w.s
canl
anin
tern
atio
nal.c
om/in
stru
men
tatio
n/cl
amps
/Use your Smart Phone
and QR Reader software to photograph the code below which will take
you to this section on the Scanlan Website
TITANIUM MICRO VASCULAR Micro Clamps ............................................................................................. 2.1 Micro Kitzmiller Clamps .............................................................................. 2.2 Castaneda Clamps ..................................................................................... 2.5
TITANIUM MEDIUM / LARGE VASCULAR Clamps ....................................................................................................... 2.8 Aorta Clamps ............................................................................................ 2.11
TITANIUM SPECIALTY SCANLAN® Loftus™ Titanium Bulldog Shunt Clamps ............................... 2.12
MICRO VASCULAR SCANLAN® Baby Vascular ....................................................................... 2.13
MEDIUM VASCULAR SCANLAN® Vascular Clamps ................................................................... 2.16 Dennis Vascular Clamps .......................................................................... 2.17 Dennis Anastomosis ................................................................................. 2.18 Dennis Multi-Purpose ............................................................................... 2.20 SCANLAN® Multi-Purpose ........................................................................ 2.22
LARGE VASCULAR SCANLAN® Anastomosis ......................................................................... 2.24 Lambert-Kay Anastomosis Clamps .......................................................... 2.25 Tangential Occlusion Clamps ................................................................... 2.26 Satinsky Occlusion Clamps, ..................................................................... 2.27 Hunter-Satinsky Aortic Clamps ................................................................. 2.28 SCANLAN® Aortic Aneurysm Clamps ....................................................... 2.29 Pollock Aortic Clamps ............................................................................... 2.30
HAEMOSTATS Ochsner Forceps / Phlebectomy Haemostat ............................................ 2.31 Bailey / Mosquito Forceps ........................................................................ 2.32 Vascular Forceps ...................................................................................... 2.33 Adson Forceps ......................................................................................... 2.36 Bengolea Forceps .................................................................................... 2.37 Crafoord Artery Forceps ........................................................................... 2.38 DeBakey Cooley Forceps ......................................................................... 2.39
SPECIALTY MacDougall Clamp ................................................................................... 2.40 Prostatectomy Clamp ............................................................................... 2.41 Allis Intestinal Clamp ................................................................................ 2.41 Vasectomy Forceps .................................................................................. 2.42
CLA
MP
Sht
tp://
ww
w.s
canl
anin
tern
atio
nal.c
om/in
stru
men
tatio
n/cl
amps
/
CLA
MP
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
titan
ium
/cla
mps
/
2.1
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Clamps n Modifications
Modification Description904 Angle jaws/tips
904A Angle and cut down jaws/tips
905 Cut down jaws/tips
907 Angled shanks - down
907B Angled shanks - up
911 Cut down shanks
917 Bailey modification (30°, 60°, 90°)
923 Satin finish instrument
924 Tension modification
928 Modify to left-handed instrument (ring style)
928A Modify to left-handed instrument (spring style)
929 Special etching
971 Lengthen instrument
973 Shorten instrument
3003-73
3003-73 with modifications 904 and 907
9009-912-13
5005-51
9009-912-13 with modifications 907B
5005-51 with modifications 917 (90º)
3003-620
n Micro Clamps, DeBakey Jaws
Cat. No. Description3003-616 6 mm jaws, slightly angled shanks, 14 mm jaw length,
4 1/8″ (10.5 cm)
* 3003-636 6 mm jaws, slightly angled shanks, 22 mm jaw length, 4 3/8" (11.2 cm)
3003-618 6 mm spoon jaws, straight shanks, 14 mm jaw length, 4 1/8″ (10.5 cm)
* 3003-638 6 mm spoon jaws, straight shanks, 26 mm jaw length, 4 5/8" (11.8 cm)
3003-620 9 mm jaws, slightly angled shanks, 16 mm jaw length, 4 1/8″ (10.5 cm)
3003-637 9 mm jaws, slightly angled shanks, 20 mm jaw length, 4 3/8" (11.2 cm)
Instrument is shown
approximate size
6 mm Jaws • Slightly Angled Shanks14 mm Jaw Length
(3003-616)
6 mm Jaws • Slightly Angled Shanks22 mm Jaw Length
(3003-636)
6 mm Spoon Jaws • Straight Shanks14 mm Jaw Length
(3003-618)
6 mm Spoon Jaws • Straight Shanks26 mm Jaw Length
(3003-638)
9 mm Jaws • Slightly Angled Shanks16 mm Jaw Length
(3003-620)
9 mm Jaws • Slightly Angled Shanks20 mm Jaw Length
(3003-637)
Jaw Length
Jaw
Titanium n Micro Vascular
3003-614
n Micro Clamps, Angled DeBakey Jaws
Cat. No. Description3003-613 45° angled jaws, 25 mm jaw length, 4 1/4″ (11 cm)
3003-633 45° angled jaws, 30 mm jaw length, 4 1/2" (11.5 cm)
3003-614 60° angled jaws, 23 mm jaw length, 4 1/8″ (10.5 cm)
3003-634 60° angled jaws, 30 mm jaw length, 4 1/4" (11 cm)
Instrument is shownapproximate size
45° Angled Jaws25 mm Jaw Length
(3003-613)
45° Angled Jaws30 mm Jaw Length
(3003-633)
60° Angled Jaws 23 mm Jaw Length
(3003-614)
60° Angled Jaws 30 mm Jaw Length
(3003-634)Instrument jaws are shownapproximate size
3003-630
Cat. No. Description3003-628 Left angled jaws, 23 mm jaw length, 4 1/4″ (11 cm)
3003-630 Right angled jaws, 23 mm jaw length, 4 1/4″ (11 cm)
n Micro Kitzmiller Clamps, Angled DeBakey Jaws
Instrument is shownapproximate size
Left Angled Jaws23 mm Jaw Length
(3003-628)
Right Angled Jaws23 mm Jaw Length
(3003-630)
CLA
MP
S
CLA
MP
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
titan
ium
/cla
mps
/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
titan
ium
/cla
mps
/
2.32.2
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Titanium n Micro VascularTitanium n Micro Vascular
n Castaneda Clamps, Cooley Jaws
n Castaneda Clamps, Double-Angled Calibrated DeBakey Jaws
3003-46
3003-67
Cat. No. Description
* 3003-47 Curved jaws, 6" (15 cm)
* 3003-46 Slightly curved jaws, 6" (15 cm)
Cat. No. Description
* 3003-67 Carotid clamp, 7 1/2" (19 cm)
Curved Jaws (3003-47)
Slightly Curved Jaws (3003-46)
n Micro Clamps, Straight DeBakey Jaws
Cat. No. Description3003-610 Straight shanks, 30 mm jaw length, 4 3/4" (12 cm)
* 3003-611 Slightly angled shanks, 30 mm jaw length, 4 3/4" (12 cm)
3003-612 Angled shanks, 22 mm jaw length, 4 1/4" (11 cm)
* 3003-632 Angled shanks, 30 mm jaw length, 4 5/8" (11.8 cm)
3003-610
Instrument is shown
approximate size
Straight Jaws, 30 mm Jaw Length(Shown actual size) (3003-610)
Straight Shanks(3003-610)
Slightly Angled Shanks(3003-611)
Angled Shanks(3003-632)
Straight Jaws, 22 mm Jaw Length(Shown actual size) (3003-612)
Angled Shanks(3003-612)
CLA
MP
S
CLA
MP
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
titan
ium
/cla
mps
/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
titan
ium
/cla
mps
/
2.52.4
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Titanium n Micro VascularTitanium n Micro Vascular
n Clamps
3003-64
3003-66
3003-68
Cat. No. Description
* 3003-64 Peripheral clamp, curved DeBakey jaws, 6 1/4" (16 cm)
* 3003-66 Beck infant aorta clamp, DeBakey jaws, 6 1/2" (16.5 cm)
* 3003-68 Subramanian infant aorta clamp, DeBakey jaws, 6 1/4" (16 cm)
Peripheral Clamp(3003-64)
Beck Infant Aorta Clamp (3003-66)
Subramanian Infant Aorta Clamp (3003-68)
Top View
30° Angled Jaws(3003-52)
50° Angled Jaws(3003-54)
70° Angled Jaws(3003-56)
n Castaneda Clamps, Cooley Jaws
Cat. No. Description* 3003-52 30° angled jaws, 5 1/4" (13.5 cm)
* 3003-54 50° angled jaws, 5 1/4" (13.5 cm)
* 3003-56 70° angled jaws, 4 3/4" (12 cm)
3003-52
Instrument is shown
approximate size
CLA
MP
S
CLA
MP
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
titan
ium
/cla
mps
/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
titan
ium
/cla
mps
/
2.72.6
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Titanium n Micro VascularTitanium n Micro Vascular
3003-69
3003-79
Cat. No. Description* 3003-69 7.5 cm jaws, 7 3/8" (18.8 cm)
* 3003-79 8 cm jaws, 2 x 3 DeBakey Wide Jaw, 11" (28 cm)
n DeBakey Vascular Clamps
8 cm DeBakey Jaws(3003-79)
7.5 cm DeBakey Jaws(3003-69)
Instrument jaws are shownapproximate size
3003-70
3003-72
Cat. No. Description* 3003-70 Kay aorta clamp, 8" (20 cm)
3003-72 Lambert-Kay aorta clamp, 8″ (20 cm)
n Clamps, 3 cm DeBakey Jaws
3 cm DeBakey Jaws (3003-72)
3 cm DeBakey Jaws(3003-70)
Instrument jaws are shownapproximate size
CLA
MP
S
CLA
MP
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
titan
ium
/cla
mps
/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
titan
ium
/cla
mps
/
2.92.8
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Titanium n Medium / Large VascularTitanium n Medium / Large Vascular
3003-74
3003-88
Cat. No. Description* 3003-74 5.5 cm curved Cooley jaws, 9 3/4" (24.8 cm)
* 3003-88 7 cm DeBakey jaws, 10 1/2" (27 cm)
n Aorta Clamps
7 cm DeBakey Jaws (3003-88)
Top View
5.5 cm Cooley Jaws (3003-74)
Instrument jaws are shownapproximate size
3003-80
3003-86
Cat. No. Description* 3003-84 2 cm jaws, 10" (25.4 cm)
* 3003-82 2.5 cm jaws, 10" (25.4 cm)
3003-80 3 cm jaws, 10" (25.4 cm)
3003-86 3.5 cm jaws, 10" (25.4 cm)
n Clamps, 3 cm DeBakey Jaws
2 cm DeBakey Jaws(3003-84)
2.5 cm DeBakey Jaws (3003-82)
3 cm DeBakey Jaws(3003-80)
3.5 cm DeBakey Jaws (3003-86)
CLA
MP
S
CLA
MP
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
titan
ium
/cla
mps
/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
titan
ium
/cla
mps
/
2.112.10
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Titanium n Medium / Large VascularTitanium n Medium / Large Vascular
n SCANLAN® Baby Vascular Clamps, Cooley Jaws
2002-231
Cat. No. Description2002-229 Small spoon jaws, straight shanks, 5 3/4″ (14.5 cm)
* 2002-230 Spoon jaws, straight shanks, 6" (15 cm)
2002-231 Profunda clamp, angled shanks, 5 1/2" (14 cm)
Profunda Cooley Jaws (2002-229)
Spoon Cooley Jaws(2002-230)
Profunda Cooley Jaws(2002-231)
Instrument is shownapproximate size
Instrument jaws are shownapproximate size
n SCANLAN® Loftus™ Titanium Bulldog Shunt Clamps
4385-42
Cat. No. Description
* 4385-40 10° angled, 10 Fr., 3 3/4" (9.5 cm) 10 Fr.
* 4385-42 25° angled, 10 Fr., 3 3/4" (9.5 cm) 10 Fr.
* 4385-44 45° angled, 10 Fr., 3 3/4" (9.5 cm) 10 Fr.
* 4385-46 60° angled, 10 Fr., 3 3/4" (9.5 cm) 10 Fr.
* 4384-40 10° angled, 12 Fr., 3 3/4" (9.5 cm) 12 Fr.
* 4384-42 25° angled, 12 Fr., 3 3/4" (9.5 cm) 12 Fr.
* 4384-44 45° angled, 12 Fr., 3 3/4" (9.5 cm) 12 Fr.
* 4384-46 60° angled, 12 Fr., 3 3/4" (9.5 cm) 12 Fr.
* 4383-40 10° angled, 14 Fr., 3 3/4" (9.5 cm) 14 Fr.
* 4383-42 25° angled, 14 Fr., 3 3/4" (9.5 cm) 14 Fr.
* 4383-44 45° angled, 14 Fr., 3 3/4" (9.5 cm) 14 Fr.
* 4383-46 60° angled, 14 Fr., 3 3/4" (9.5 cm) 14 Fr.
60º 45º 25º 10º
CLA
MP
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
clam
ps/
2.13
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
CLA
MP
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
titan
ium
/cla
mps
/
2.12
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Micro Vascular n CooleyTitanium n Specialty Instruments n Loftus™ Shunt Clamps
n SCANLAN® Baby Vascular Clamps, Cooley Jaws
2002-248
Cat. No. Description2002-246 8 mm jaws, 5 3/4" (14.5 cm)
* 2002-244 12 mm jaws, 5 3/4" (14.5 cm)
2002-242 16 mm jaws, 5 1/4" (13.5 cm)
2002-240 20 mm jaws, 5 1/4" (13.5 cm)
2002-248 Kitzmiller, left angled jaws, 5 1/4″ (13.5 cm)
2002-250 Kitzmiller, right angled jaws, 5 1/4″ (13.5 cm)
Kitzmiller Left Angled Cooley Jaws
(2002-248)
8 mm Cooley Jaws(2002-246)
12 mm Cooley Jaws(2002-244)
16 mm Cooley Jaws(2002-242)
20 mm Cooley Jaws(2002-240)
Kitzmiller Right Angled Cooley Jaws (2002-250)
Instrument jaws are shownapproximate size
Instrument is shownapproximate size
n SCANLAN® Baby Vascular Clamps, Cooley Jaws
2002-234
Cat. No. Description2002-232 4 cm straight jaws, 6" (15 cm)
2002-234 25° angled jaws, 5 3/4″ (14.5 cm)
2002-235 45° angled jaws, 5 3/4″ (14.5 cm)
2002-236 60° angled jaws, 5 1/4″ (13.5 cm)
* 2002-238 90° angled jaws, 5 1/4" (13.5 cm)
Instrument is shownapproximate size
Instrument jaws are shownapproximate size
60º Cooley Jaws (2002-236)
90º Cooley Jaws (2002-238)
45º Cooley Jaws (2002-235)
25º Cooley Jaws (2002-234)
4 cm Straight Cooley Jaws (2002-232)
CLA
MP
S
CLA
MP
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
clam
ps/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
clam
ps/
2.152.14
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Micro Vascular n CooleyMicro Vascular n Cooley
1.5 cm DeBakey Jaws(2002-90)
6 cm DeBakey Jaws(2002-78)
n Dennis Clamps, DeBakey Jaws
n Dennis Peripheral Vascular Clamps
Cat. No. Description2002-90 1.5 cm carotid clamp, 7" (18 cm)
Cat. No. Description2002-78 6 cm DeBakey jaws, 8" (20 cm)
2002-78
Instrument jaws are shownapproximate size
Cat. No. Description
* 2002-128 6.5 cm straight jaws, straight shanks, 8 1/2" (21.5 cm)
* 2002-134 30 mm jaws, angled shanks, 8" (20 cm)
6.5 cm Straight DeBakey Jaws(2002-128)
30 mm DeBakey Jaws
(2002-134)
12 mmHausmann Jaws(2002-186)
18 mmHausmann Jaws(2002-184)
n SCANLAN® Vascular Clamps, DeBakey Jaws
2002-128
2002-134
Instrument jaws are shownapproximate size
n SCANLAN® Vascular Clamps, Hausmann Jaws
Cat. No. Description
* 2002-186 12 mm jaws, straight shanks, 8" (20 cm)
* 2002-184 18 mm jaws, straight shanks, 8" (20 cm)
CLA
MP
S
CLA
MP
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
clam
ps/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
clam
ps/
2.172.16
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Medium Vascular n SCANLAN® Dennis VascularMedium Vascular n SCANLAN® DeBakey
1 cm DeBakey Jaws (2002-62)
1.5 cm DeBakey Jaws (2002-64)
1.5 cm DeBakey Jaws(2002-70)
2 cm DeBakey Jaws (2002-66)
2 cm DeBakey Jaws (2002-72)
n Dennis Anastomosis Clamps, DeBakey Jaws
Cat. No. Description2002-62 1 cm jaws, 7" (18 cm)
* 2002-64 1.5 cm jaws, 7" (18 cm)
* 2002-70 1.5 cm jaws, 7" (18 cm)
* 2002-66 2 cm jaws, 7" (18 cm)
* 2002-72 2 cm jaws, 7" (18 cm)
2002-62
Instrument jaws are shownapproximate size
1 cm Cooley Jaws(2002-92)
1.5 cm Cooley Jaws(2002-94)
2 cm Cooley Jaws(2002-96)
n Dennis Anastomosis Clamps, Cooley Jaws
Cat. No. Description* 2002-92 1 cm jaws, 6 1/2" (16.5 cm)
* 2002-94 1.5 cm jaws, 6 3/4" (17 cm)
* 2002-96 2 cm jaws, 6 3/4" (17 cm)
2002-92
Instrument jaws are shownapproximate size
CLA
MP
S
CLA
MP
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
clam
ps/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
clam
ps/
2.192.18
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Medium Vascular n Dennis AnastomosisMedium Vascular n Dennis Anastomosis
n Dennis Multi-Purpose Clamps, Angled DeBakey Jaws
2002-88
Cat. No. Description2002-82 4 cm 45° angled jaws, 6 1/4" (16 cm)
2002-80 6 cm 45° angled jaws, 7 1/4″ (18.5 cm)
2002-88 8 cm 45° angled jaws, 8″ (20 cm)
* 2002-86 6 cm 90° angled jaws, 5 1/2" (14 cm)
6 cm 45º Angled DeBakey Jaws
(2002-80)
4 cm 45° AngledDeBakey Jaws
(2002-82)
6 cm Right AngledDeBakey Jaws
(2002-86)
8 cm 45º Angled DeBakey Jaws
(2002-88)
Instrument jaws are shownapproximate size
Large Semi-Circle Cooley Jaws(2002-100)
3 cm Cooley Jaws(2002-110)
2 cm Cooley Jaws (2002-106)
n Dennis Anastomosis Clamps, Semi-Circle Cooley Jaws
n Dennis Multi-Purpose Clamps, 3 cm Cooley Jaws
n Dennis Anastomosis Clamps, 2 cm Cooley Jaws
Cat. No. Description* 2002-100 Large jaws, 6 3/4 " (17 cm)
Cat. No. Description* 2002-110 angled jaws, 6 1/4 " (16 cm)
Cat. No. Description* 2002-106 7" (18 cm)
2002-110
Instrument jaws are shownapproximate size
CLA
MP
S
CLA
MP
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
clam
ps/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
clam
ps/
2.212.20
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Medium Vascular n Dennis Multi-PurposeMedium Vascular n Dennis Anastomosis / Multi-Purpose
4 cm Cooley Jaws (2002-112)
8 cm DeBakey Jaws(2002-23)
8.5 cm Cooley Jaws (2002-113)
8.5 cm DeBakey Jaws(2002-13)
11 cm DeBakey Jaws(2002-51)
10.5 cm DeBakey Jaws(2002-43)
13.5 cm DeBakey Jaws(2002-33)
n SCANLAN® Multi-Purpose Clamps, Straight Jaws
Cat. No. Description* 2002-112 4 cm Cooley jaws, 6 3/4" (17 cm)
* 2002-23 8 cm DeBakey jaws, 10 1/4" (26 cm)
* 2002-113 8.5 cm Cooley jaws, 8 1/2" (21.5 cm)
* 2002-13 8.5 cm DeBakey jaws, 8 1/2" (21.5 cm)
* 2002-43 10.5 cm DeBakey jaws, 11 3/8" (28.8 cm)
* 2002-51 11 cm DeBakey jaws, 12 1/2" (32 cm)
* 2002-33 13.5 cm DeBakey jaws, 13" (33 cm)
2002-51
Instrument jaws are shownapproximate size
n SCANLAN® Multi-Purpose Clamps, Angled DeBakey Jaws
2002-16
Cat. No. Description
* 2002-14 6 cm, 60° angled jaws, 9″ (23 cm)
2002-16 7.5 cm, 60° angled jaws, 9″ (23 cm)
7.5 cm 60º Angled DeBakey Jaws
(2002-16) 6 cm, 60° Angled
DeBakey Jaws (2002-14)
Instrument jaws are shownapproximate size
CLA
MP
S
CLA
MP
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
clam
ps/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
clam
ps/
2.232.22
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Medium Vascular n SCANLAN® Multi-PurposeMedium Vascular n SCANLAN® Multi-Purpose
n Dennis Aortic Anastomosis Clamps, 3 cm DeBakey Jaws
n Lambert-Kay Anastomosis Clamps, 3 cm DeBakey Jaws
2002-76
Cat. No. Description
* 2002-76 7" (18 cm)
Cat. No. Description2002-42 8 3/4" (22 cm)
3 cm DeBakey Jaws(2002-42)
3 cm DeBakey Jaws(2002-76)
n SCANLAN® Anastomosis Clamps, DeBakey Jaws
2002-38
Cat. No. Description
* 2002-52 2 cm jaws, 8 1/2" (21.5 cm)
* 2002-38 3.5 cm jaws, 8 1/2" (21.5 cm)
* 2002-40 3.5 cm jaws, 10 1/4" (26 cm)
3.5 cm DeBakey Jaws(2002-38)
3.5 cm DeBakey Jaws(2002-40)
2 cm DeBakey Jaws (2002-52)
CLA
MP
S
CLA
MP
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
clam
ps/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
clam
ps/
2.252.24
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Large Vascular n Dennis / Lambert-KayLarge Vascular n SCANLAN® Anastomosis
n Satinsky Occlusion Clamps, DeBakey Jaws
2002-34
Cat. No. Description
* 2002-34 2.3 cm jaws, 8 1/2" (21.5 cm)
* 2002-32 2.7 cm jaws, 8 1/2" (21.5 cm)
* 2002-36 3.5 cm jaws, 8 3/4" (22 cm)
2.7 cmDeBakey Jaws
(2002-32)
3.5 cmDeBakey Jaws
(2002-36)
2.3 cmDeBakey Jaws
(2002-34)
Instrument jaws are shownapproximate size
n Tangential Occlusion Clamps, DeBakey Jaws
2002-28
Cat. No. Description
* 2002-28 2.5 cm jaws, 9" (23 cm)
* 2002-30 3.4 cm jaws, 9 1/4" (23.5 cm)
3.4 cmDeBakey Jaws
(2002-30)
2.5 cmDeBakey Jaws
(2002-28)
Instrument jaws are shownapproximate size
CLA
MP
S
CLA
MP
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
clam
ps/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
clam
ps/
2.272.26
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Large Vascular n SatinskyLarge Vascular n Tangential Occlusion
n SCANLAN® Aortic Aneurysm Clamps, DeBakey Jaws
2002-44
Cat. No. Description
* 2002-46 5 cm jaws, 8 1/2" (21.5 cm)
2002-44 8 cm curved jaws, reversed handle curvature, 10 1/4" (26 cm)
* 2002-48 7 cm jaws, 10 3/4" (27.3 cm)
* 2002-50 7.5 cm jaws, 11" (28 cm)
8 cm DeBakey Jaws
(2002-44)
7 cmDeBakey Jaws
(2002-48)
7.5 cmDeBakey Jaws
(2002-50)
5 cmDeBakey Jaws
(2002-46)
Instrument jaws are shownapproximate size
n Hunter-Satinsky Aortic Clamps
2002-117
Cat. No. Description
* 2002-116 Blunted Potts Teeth Jaws, 4.0 cm jaws, 8 3/4" (22 cm)
2002-117 DeBakey jaws, 3.5 cm jaws, 8 3/4" (22 cm)
3.5 cmDeBakey Jaws
(2002-117)
4.0 cm Blunted Potts Teeth Jaws
(2002-116)
CLA
MP
S
CLA
MP
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
clam
ps/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
clam
ps/
2.292.28
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Large Vascular n Aortic AneurysmLarge Vascular n Hunter-Satinsky
n Ochsner Forceps, 90° Angled Very Fine Serrated Jaws
n Phlebectomy Haemostat, 90° Angled Very Fine Jaws with Sharp Grasping Serrations
9009-148
5005-80
Cat. No. Description9009-148 4 1/2″ (11.5 cm)
Cat. No. Description5005-80 4 1/2″ (11.5 cm)
90º Angled Very Fine Serrated Jaws
(9009-148)
90º Angled (5005-80)
Instrument is shownapproximate size
Instrument is shownapproximate size
Instrument jaws are shownapproximate size
Instrument jaws are shownapproximate size
n SCANLAN® Aortic Aneurysm Clamps, DeBakey Jaws
n Pollock Aortic Clamps, DeBakey Jaws
2002-54
Cat. No. Description
* 2002-22 5 cm jaws, 10 3/4" (27.3 cm)
Cat. No. Description2002-54 8 cm jaws, 10" (25.4 cm)
5 cmDeBakey Jaws
(2002-22)
2002-22 Top View
8 cmDeBakey Jaws
(2002-54)
CLA
MP
S
CLA
MP
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
clam
ps/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
clam
ps/
2.312.30
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Haemostats n Ochsner ForcepsLarge Vascular n Aortic Aneurysm / Pollock Aortic
n Vascular (Mosquito) Forceps, Serrated Jaws
5005-82
Cat. No. Description5005-01 Straight jaws, 5" (12.7 cm)
5005-02 Delicate curved jaws, 4 3/4" (12 cm)
5005-03 Curved jaws, 5" (12.7 cm)
5005-82 Curved jaws with sharp grasping serrations, 5" (12.7 cm)
* 5005-05 Full curved jaws, 4 1/2" (11.5 cm)
Straight Jaws(5005-01)
Delicate Curved Jaws (5005-02)
Curved Jaws(5005-03)(5005-82)
Full Curved Jaws(5005-05)
Instrument is shownapproximate size
n Bailey Forceps, Very Fine Angled Serrated Jaws
n Hartman Mosquito Forceps
5005-64
5005-00
Cat. No. Description5005-60 30° angled jaws, 7″ (18 cm)
5005-62 60° angled jaws, 7″ (18 cm)
5005-64 90° angled jaws, 7″ (18 cm)
Cat. No. Description5005-00 Curved jaws, 3 7/8″ (9.8 cm)
* 5005-001 Straight jaws, 3 7/8″ (9.8 cm)
90º Angled (5005-64)
60º Angled(5005-62)
30º Angled (5005-60)
Straight Jaws(5005-001)
Curved Jaws (5005-00)
Instrument is shown approximate size
Instrument is shownapproximate size
Instrument jaws are shownapproximate size
CLA
MP
S
CLA
MP
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
clam
ps/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
clam
ps/
2.332.32
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Haemostats n VascularHaemostats n Bailey / Mosquito
n Vascular Forceps, Serrated Jaws
5005-23
Cat. No. Description5005-13 Curved jaws, 5 1/2" (14 cm)
5005-15 Full curved jaws, 5 1/3″ (13.7 cm)
5005-23 Curved jaws, 6 1/2″ (16.5 cm)
5005-25 Full curved jaws, 6 1/4" (16 cm)
5005-37 Straight jaws, 1x2 teeth, 7″ (18 cm)
* 5005-39 Curved jaws, 1x2 teeth, 7" (18 cm)
5005-35 Full curved jaws, 7″ (18 cm)
5005-33 Curved jaws, 7 1/4″ (18.5 cm)
Curved Jaws (5005-13, 5005-23 and 5005-33)
Full Curved Jaws (5005-15, 5005-25 and 5005-35)
Curved Jaws 1 x 2 Teeth (5005-39)
Straight Jaws 1 x 2 Teeth(5005-37)
n Delicate Mosquito Forceps
5005-86
Cat. No. Description5005-86 Very fine curved jaws, 5″ (12.7 cm)
5005-88 Curved, 1 x 2 teeth, 5" (12.7 cm)
Very Fine Curved Jaws (5005-86)
Curved Jaws,1x2 Teeth (5005-88)
Instrument is shownapproximate size
Instrument is shownapproximate size
CLA
MP
S
CLA
MP
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
clam
ps/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
clam
ps/
2.352.34
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Haemostats n VascularHaemostats n Vascular
n Bengolea Forceps, Curved Serrated Jaws
5005-47
Cat. No. Description
* 5005-47 8" (20 cm)
5005-51 9 1/2" (24 cm)
* 5005-49 Full curved jaws, 7 3/4" (19.5 cm)
5005-53 Full curved jaws, 9" (23 cm)
Curved Jaws(5005-47 and 5005-51)
Full Curved Jaws (5005-49 and 5005-53)
n Adson Forceps, Serrated Jaws
5005-43
Cat. No. Description5005-43 Curved jaws, 7" (18 cm)
5005-45 Full curved jaws, 7" (18 cm)
Curved Jaws(5005-43)
Full Curved Jaws(5005-45)
CLA
MP
S
CLA
MP
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
clam
ps/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
clam
ps/
2.372.36
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Haemostats n BengoleaHaemostats n Adson
n DeBakey Cooley Forceps, Carmalt Jaws with Cross Hatch Tips
4377-11
Cat. No. Description4375-08 Curved jaws, 7 1/2" (19 cm)
4375-09 Curved jaws, 9" (23 cm)
4375-10 Curved jaws, 10" (25.4 cm)
4375-11 Curved jaws, 11″ (28 cm)
4375-12 Curved jaws, 12" (30.5 cm)
* 4375-14 Curved jaws, 14" (35.6 cm)
4377-08 Right angled jaws, 7 1/2" (19 cm)
4377-09 Right angled jaws, 9" (23 cm)
4377-11 Right angled jaws, 11″ (28 cm)
4377-12 Right angled jaws, 12" (30.5 cm)
Right Angled Jaws Curved Jaws
n Crafoord Artery Forceps, Curved Serrated Jaws
4447-07
Cat. No. Description
* 4447-07 7" (18 cm)
4447-09 9 1/4" (23.5 cm)
Curved Jaws
CLA
MP
S
CLA
MP
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
clam
ps/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
clam
ps/
2.392.38
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Haemostats n DeBakey CooleyHaemostats n Crafoord Artery
n Prostatectomy Clamp, 45° Angled Babcock Jaws, Curved Shanks
n Allis Intestinal Clamp
4545-09
4635-06
Cat. No. Description4545-09 8 mm width jaws, 9" (23 cm)
Cat. No. Description4635-06 4 mm width jaws, 5 7/8" (14.9 cm)
Instrument is shownapproximate size
Instrument is shownapproximate size
n MacDougall Clamp, Carmalt Jaws with Cross Hatch Tips
4377-30
4377-28
Cat. No. Description4377-28 Shanks angled left, 12" (30.5 cm)
4377-30 Shanks angled right, 12" (30.5 cm)
4377-28
CLA
MP
S
CLA
MP
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
clam
ps/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
clam
ps/
2.412.40
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Haemostats n Specialty n Prostatectomy / AllisHaemostats n Specialty n MacDougall
n Smith Leifer Vasectomy Forceps
1001-54
Cat. No. Description1001-54 Sharp tips, 7" (18 cm)
Instrument is shownapproximate size
CLA
MP
Sht
tp://
ww
w.s
canl
anin
tern
atio
nal.c
om/in
stru
men
tatio
n/cl
amps
/
2.43
CLA
MP
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
clam
ps/
2.42
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Haemostats n Specialty n Vasectomy
1
2
3
4
5
6
7
8
9
10
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25INCHES CM
CLA
MP
Sht
tp://
ww
w.s
canl
anin
tern
atio
nal.c
om/in
stru
men
tatio
n/cl
amps
/
2.44
FOR
CE
PS
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
forc
eps/
Use your Smart Phone and QR Reader software to photograph the code below which will take
you to this section on the Scanlan Website
TITANIUM ROUND HANDLE — MICRO LEGACY Platform Ring Tips ............................................. 3.1 LEGACY Platform Tips ...................................................... 3.2 LEGACY DeBakey Tips ..................................................... 3.4 LEGACY Bayonet Style ..................................................... 3.5 Ring Tips ............................................................................3.6 Platform Tips ......................................................................3.7 DeBakey Tips .................................................................... 3.8 TITANIUM FLAT HANDLE Gerald Tips ........................................................................ 3.9 DeBakey Tips .................................................................. 3.10 General / Cushing ........................................................... 3.11 Resano Valve .................................................................. 3.11
MICRO TIPS / ROUND HANDLE Ring Tips ......................................................................... 3.12 Platform Tips ................................................................... 3.14
GERALD Fine Tips ...........................................................................3.15
DeBAKEY Fine to Medium Tips ........................................................ 3.17 Needle Pulling Tissue Forceps ........................................ 3.18
GENERAL / FINE TO MEDIUM TIPS Cushing / Brophy ............................................................ 3.19 McIndoe ........................................................................... 3.20 Gillies / Thumb................................................................. 3.21
SPECIALTY Small Vascular / Plastic Surgery Jewelers / Suture Tying ................................................... 3.22 Adson / Broli-Adson ......................................................... 3.23 Resano Valve Forceps .................................................... 3.24 Suction ............................................................................ 3.24
FOR
CE
PS
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
forc
eps/
Forceps n Modifications
Modification Description904 Angle jaws/tips
904A Angle and cut down jaws/tips
905 Cut down jaws/tips
905E Cut down jaws/tips 0.4 mm
905TC Cut down carbon-inlay jaws/tip
915 Gold plating
921 Grasping modification
923 Satin finish instrument
924 Tension modification
929 Special etching
971 Lengthen instrument
973 Shorten instrument
4004-79
3003-05 4004-97
4004-84
4004-79 with modifications 971
3003-05 with modifications 904 4004-97 with modifications 904
4004-84 with modifications 905
FOR
CE
PS
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
titan
ium
/forc
eps/
3.1
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Cat. No. Description3003-922 Straight tips, 7 1/8″ (18.1 cm)
3003-924 Straight tips, 8 1/4″ (21 cm)
3003-926 Straight tips, 9″ (23 cm)
3003-928 Straight tips, 10″ (25.4 cm)
3003-804 Bayonet, straight tips, 8 3/4″ (22 cm)
n SCANLAN® LEGACY Micro Forceps, Never Shear™ Dual Guide™ DIAMOND DUST™ Platform Ring Tips, Round Handle, 10 mm Diameter Knurling
PlatformTips
Straight PlatformDIAMOND DUST™ Ring Tips
3003-924
Titanium n Round Handle n Micro Platform Ring Tips n LEGACY
DUAL GUIDE™ Patent No. 8,147,152
The Never Shear™ Dual Guide™ design was developed in cooperation with John D. Puskas, MD
Never Shear™ Dual Guide™■ Prevents the tips from scissoring
■ Prevents tissue shearing
Dual Guide™ Patent No. 8,147,512
n SCANLAN® LEGACY Micro Forceps, Never Shear™ Dual Guide™ DIAMOND DUST™ Platform Tips, 1 x 2 Micro Teeth, Round Handle, 10 mm Diameter Knurling
Cat. No. 0.5 mm Tips
Cat. No. 1.0 mm Tips Description
3003-770 Puskas™ straight tips, 7 1/8″ (18.1 cm)
3003-774 3003-778 Puskas™ straight tips, 8 1/4″ (21 cm)
3003-775 Puskas™ curved tips, 8 1/4″ (21 cm)
3003-776 3003-779 Puskas™ angled tips, 8 1/4″ (21 cm)
3003-780 3003-784 Straight tips, 9″ (23 cm)
3003-782 3003-786 Straight tips, 10″ (25.4 cm)
3003-810 Puskas™ bayonet, straight tips, 8 3/4″ (22 cm)
PlatformTips
45º Angled PlatformDIAMOND DUST™ Tips
Straight PlatformDIAMOND DUST™ Tips
3003-774 3003-778
Curved PlatformDIAMOND DUST™ Tips
Delicate 1x2 Fine Teeth
3003-774
Cat. No. 0.5 mm Tips
Cat. No. 1.0 mm Tips Description
3003-902 3003-912 Straight tips, 7 1/8″ (18.1 cm)
3003-904 3003-914 Straight tips, 8 1/4″ (21 cm)
3003-906 3003-916 Straight tips, 9″ (23 cm)
3003-908 3003-918 Straight tips, 10″ (25.4 cm)
3003-816 3003-818 Bayonet, straight tips, 8 3/4″ (22 cm)
n SCANLAN® LEGACY Micro Forceps, Never Shear™ Dual Guide™ DIAMOND DUST™ Platform Tips, Round Handle, 10 mm Diameter Knurling
PlatformTips
Straight PlatformDIAMOND DUST™
3003-904
DUAL GUIDE™ Patent No. 8,147,152
The Never Shear™ Dual Guide™ design was developed in cooperation with John D. Puskas, MD
FOR
CE
PS
FOR
CE
PS
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
titan
ium
/forc
eps/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
titan
ium
/forc
eps/
3.33.2
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
DUAL GUIDE™ Patent No. 8,147,152
The Never Shear™ Dual Guide™ design was developed in cooperation with John D. Puskas, MD
Titanium n Round Handle n Micro Platform Tips n LEGACYTitanium n Round Handle n Micro Platform Tips n LEGACY
n SCANLAN® LEGACY Micro Forceps, Never Shear™ Dual Guide™, Bayonet Style, Round Handle, StraightTips, 83/4″(22cm),10mmDiameterKnurling
Cat. No. Description3003-816 0.5 mm DIAMOND DUST™ platform tips
3003-818 1 mm DIAMOND DUST™ platform tips
3003-810 0.5 mm DIAMOND DUST™ with 1x2 micro-teeth
3003-804 1 mm DIAMOND DUST™ platform ring tips
3003-806 1 mm Tapered DeBakey tips
PlatformTips
Straight PlatformDIAMOND DUST™ Tips
1 mm StraightDIAMOND DUST™ Tips
Delicate 1x2Fine Tips
TaperedDeBakey Tips
3003-816
Cat. No. Description3003-932 Straight tips, 7 1/8″ (18.1 cm)
3003-934 Straight tips, 8 1/4″ (21 cm)
3003-936 Straight tips, 9″ (23 cm)
3003-938 Straight tips, 10″ (25.4 cm)
3003-806 Bayonet, straight tips, 8 3/4″ (22 cm)
n SCANLAN® LEGACY Micro Forceps, Never Shear™ Dual Guide™, 1 mm Tapered DeBakey Tips, Round Handle, 10 mm Diameter Knurling
TaperedDeBakey Tips
3003-934
FOR
CE
PS
FOR
CE
PS
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
titan
ium
/forc
eps/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
titan
ium
/forc
eps/
3.53.4
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Titanium n Bayonet Style n Micro Tips n LEGACY
DUAL GUIDE™ Patent No. 8,147,152
The Never Shear™ Dual Guide™ design was developed in cooperation with John D. Puskas, MD
DUAL GUIDE™ Patent No. 8,147,152
The Never Shear™ Dual Guide™ design was developed in cooperation with John D. Puskas, MD
Titanium n Round Handle n Micro DeBakey Tips n LEGACY
Cat. No. Description3003-158 Straight tips, 7 1/4″ (18.5 cm)
3003-158-8 Straight tips, 8 1/4″ (21 cm)
3003-158-9 Straight tips, 9″ (23 cm)
* 3003-158-10 Straight tips, 10″ (25.4 cm)
* 3003-159 Curved tips, 7 1/4″ (18.5 cm)
3003-159-8 Curved tips, 8 1/4″ (21 cm)
* 3003-159-10 Curved tips, 10″ (25.4 cm)
n Micro Forceps, DIAMOND DUST™ Platform Tips, Round Handle
PlatformTips
Straight PlatformDIAMOND DUST™
Curved PlatformDIAMOND DUST™
n Micro Suture Tying Forceps, DIAMOND DUST™ Platform Tips, Round Handle
Cat. No. Description* 3003-150 Straight tips, 4 3/4″ (12 cm)
3003-154 Straight tips, 6″ (15 cm)
PlatformTips
Straight PlatformDIAMOND DUST™
3003-158-8
3003-150
Cat. No. Description* 3003-164 1 mm ring tip, 6″ (15 cm)
3003-160 1 mm ring tip, 7 1/4″ (18.5 cm)
* 3003-166 2 mm ring tip, 6″ (15 cm)
3003-162 2 mm ring tip, 7 1/4″ (18.5 cm)
Cat. No. Description3003-720 7″ (18 cm)
3003-724 8 1/4″ (21 cm)
3003-726 9" (23 cm)
3003-728 10" (25.4 cm)
n Micro Forceps, Straight DIAMOND DUST™ Ring Tips, Round Handle
n Dennis Micro Forceps, 1 mm Straight DIAMOND DUST™ Ring Tips, Round Handle, Counterbalanced
1 mm StraightDIAMOND DUST™ Ring Tips
2 mm StraightDIAMOND DUST™ Ring Tips
1 mm StraightDIAMOND DUST™ Ring Tips
3003-160
3003-720
FOR
CE
PS
FOR
CE
PS
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
titan
ium
/forc
eps/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
titan
ium
/forc
eps/
3.73.6
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Titanium n Round Handle n Micro Platform TipsTitanium n Round Handle n Micro Ring Tips
Cat. No. Description3003-740 7″ (18 cm)
3003-742 8″ (20 cm)
n Gerald DeBakey Forceps, 1 mm Straight DeBakey Tips, Flat Handle
StraightDeBakey Tips
n Gerald Forceps, 1 mm Straight DIAMOND DUST™ Platform Ring Tips, Flat Handle
n Gerald Forceps, Straight Tips, Flat Handle
Cat. No. Description3003-750 7" (18 cm)
* 3003-752 8" (20 cm)
Cat. No. Description* 3003-738 Delicate 1x2 fine teeth, 7" (18 cm)
3003-760 DIAMOND DUST™ platform tips, 7" (18 cm)
3003-762 DIAMOND DUST™ platform tips, 8" (20 cm)
1 mm DIAMOND DUST ™
Platform Ring Tips
Delicate 1x2Fine Tips
DIAMOND DUST ™
Platform Tips
3003-750
3003-760
3003-740
n Dennis Micro Forceps, DIAMOND DUST™ Platform Tips, Round Handle, Counterbalanced
Cat. No. Description3003-710 Straight tips, 7″ (18 cm)
* 3003-712 Curved tips, 7″ (18 cm)
3003-714 Straight tips, 8 1/4″ (21 cm)
* 3003-716 Curved tips, 8 1/4″ (21 cm)
PlatformTips
Straight PlatformDIAMOND DUST™ Tips
3003-710
Curved PlatformDIAMOND DUST™ Tips
n SCANLAN® DeBakey Micro Forceps, 1 mm Straight DeBakey Tips, Round Handle
Cat. No. Description3003-730 7 1/8″ (18.1 cm)
1 mm StraightDeBakey Tips
3003-730
Titanium n Round Handle n Micro DeBakey Tips
FOR
CE
PS
FOR
CE
PS
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
titan
ium
/forc
eps/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
titan
ium
/forc
eps/
3.93.8
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Titanium n Flat Handle n Gerald DeBakey TipsTitanium n Round Handle n Micro Platform Tips
n ResanoValveForceps,Multi-ToothedTips,FlatHandle(forheartvalveremoval)
n Cushing Forceps, 1 mm Straight Serrated Tips, Fluted Handle
Cat. No. Description3003-794 9″ (23 cm)
Cat. No. Description3003-09 7″ (18 cm)
Multi-Toothed Tips
1 mm Serrated Tips
3003-794
3003-09
Titanium n Flat Handle n Resano Valve
n DeBakey Dissecting Forceps, Straight Tips, Flat Handle
Cat. No. Description3003-03 1 mm tips, 6″ (15 cm)
3003-05 1 mm tips, 7 3/4″ (19.5 cm)
3003-07 1 mm tips, 9 1/2″ (24 cm)
3003-02 2 mm tips, 6″ (15 cm)
3003-04 2 mm tips, 7 3/4″ (19.5 cm)
3003-06 2 mm tips, 9 1/2″ (24 cm)
1 mm Straight DeBakey Tips
2 mm Straight DeBakey Tips
3003-04
FOR
CE
PS
FOR
CE
PS
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
titan
ium
/forc
eps/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
titan
ium
/forc
eps/
3.113.10
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Titanium n Flat Handle n General / CushingTitanium n Flat Handle n DeBakey Tips
n SCANLAN® Micro Forceps, Lightweight, DIAMOND DUST™ Round Handle
Cat. No. Description4004-250 1 mm straight ring tips, 7 1/8″ (18.1 cm)
4004-280 1 mm straight platform ring tips, 7 1/8″ (18.1 cm)
4004-282 1 mm straight platform ring tips, 8 1/4″ (21 cm)
4004-254 2.5 mm straight ring tips, 7 1/8" (18.1 cm)
4004-252 1 mm straight ring tips, 8 1/4″ (21 cm)
* 4004-253 1 mm curved ring tips, 8 1/4" (21 cm)
* 4004-256 2.5 mm straight ring tips, 8 1/4" (21 cm)
Straight PlatformDIAMOND DUST™ Ring Tips
Platform Tips
StraightDIAMOND DUST™ Ring Tips
4004-280
CurvedDIAMOND DUST™ Ring Tips
n Dennis Micro Forceps, DIAMOND DUST™ Ring Tips, Round Handle, Counterbalanced
Cat. No. Description4004-216 1 mm straight tips, 6" (15 cm)
4004-220 1 mm straight tips, 7 1/4″ (18.5 cm)
* 4004-221 1 mm curved tips, 7 1/4" (18.5 cm)
4004-224 1 mm straight tips, 8 1/4″ (21 cm)
* 4004-225 1 mm curved tips, 8 1/4" (21 cm)
4004-226 1 mm straight tips, 9″ (23 cm)
* 4004-227 1 mm curved tips, 9" (23 cm)
* 4004-228 1 mm straight tips, 10" (25.4 cm)
4004-320 2 mm straight tips, 7" (18 cm)
* 4004-330 2.5 mm straight tips, 7" (18 cm)
StraightDIAMOND DUST™ Ring Tips
CurvedDIAMOND DUST™ Ring Tips
4004-220
FOR
CE
PS
FOR
CE
PS
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
forc
eps/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
forc
eps/
3.133.12
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Round Handle n Micro Ring TipsRound Handle n Micro Ring Tips
n Gerald Forceps, Straight Tips, Flat Handle
n Gerald Forceps, Flat Handle
Cat. No. Description4004-76 1 mm serrated tips, 7″ (18 cm)
4004-77 1 mm cross-serrated tips, 7 3/4″ (19.5 cm)
4004-79 1 mm cross-serrated tips, 10″ (25.4 cm)
* 4004-79-12 1.5 mm cross-serrated tips, 12" (30.5 cm)
Cat. No. Description4004-238 Straight tips, delicate 1x2 teeth, 7" (18 cm)
4004-240 1 mm straight DeBakey tips, 7″ (18 cm)
4004-242 1 mm straight DeBakey tips, 8″ (20 cm)
4004-244 1 mm straight DIAMOND DUST™ ring tips, 7″ (18 cm)
4004-346 1 mm straight DIAMOND DUST™ platform tips, 7" (18 cm)
4004-246 1 mm straight DIAMOND DUST™ tips, 7″ (18 cm)
4004-248 1 mm straight DIAMOND DUST™ tips, 8" (20 cm)
Straight Cross-SerratedGerald Tips
Straight GeraldDeBakey Tips
Straight GeraldDelicate 1x2 Teeth
Straight Gerald DIAMOND DUST™ Ring Tips
Straight Gerald DIAMOND DUST™ Tips
Platform Tips DIAMOND DUST™
Straight SerratedGerald Tips
4004-76
4004-244
n Dennis Micro Forceps, DIAMOND DUST™ Platform Tips, Round Handle, Counterbalanced
Cat. No. Description4004-210 Straight tips, 6" (15 cm)
4004-95 Straight tips, 7″ (18 cm)
4004-96 Curved tips, 7″ (18 cm)
4004-98 Straight tips, 8 1/4″ (21 cm)
4004-99 Curved tips, 8 1/4″ (21 cm)
4004-204 Straight tips, 10" (25.4 cm)
* 4004-206 Curved tips, 10" (25.4 cm)
4004-305 Straight tips, 1x2 teeth, 7" (18 cm)
Curved PlatformDIAMOND DUST™ Tips
Straight PlatformDIAMOND DUST™ Tips
Cat. No. Description4004-260 Straight tips, 7 1/8″ (18.1 cm)
* 4004-261 Curved tips, 7 1/8" (18.1 cm)
4004-262 Straight tips, 8 1/4″ (21 cm)
* 4004-263 Curved tips, 8 1/4" (21 cm)
4004-280 1 mm straight ring tips, 7 1/8" (18.1 cm)
4004-282 1 mm straight ring tips, 8 1/4" (21 cm)
4004-235 Straight tips, 1x2 teeth, 7 1/8" (18.1 cm)
n SCANLAN® Micro Forceps, Lightweight, DIAMOND DUST™ Platform Tips, Round Handle
Straight Platform DIAMOND DUST™Tips
Curved Platform DIAMOND DUST™ Tips
Straight Ring DIAMOND DUST™ Tips
Straight Platform Tip 1x2 Teeth
Straight Platform Tip 1x2 Teeth
Platform Tips
Platform Tips
4004-95
4004-260
FOR
CE
PS
FOR
CE
PS
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
forc
eps/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
forc
eps/
3.153.14
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Gerald n Flat Handle n Fine TipsRound Handle n Micro Platform Tips
Cat. No. Description4004-40 1 mm straight tips, 6" (15 cm)
4004-42 2 mm straight tips, 6" (15 cm)
4004-43 1 mm straight tips, 7 3/4″ (19.5 cm)
4004-44 1 mm straight tips, fluted handle, 7 3/4″ (19.5 cm)
4004-45 2 mm straight tips, 7 3/4″ (19.5 cm)
4004-45A 2.7 mm straight tips, 7 3/4" (19.5 cm)
4004-46 2 mm straight tips, fluted handle, 7 3/4" (19.5 cm)
* 4004-47 2 mm 25° angled tips, 7 3/4" (19.5 cm)
4004-48 1.5 mm straight tips, 9 1/2" (24 cm)
4004-50 2 mm straight tips, 9 1/2″ (24 cm)
4004-50A 2.7 mm straight tips, 9 1/2" (24 cm)
4004-50B 3.2 mm straight tips, 9 1/2″ (24 cm)
4004-52 1.5 mm straight tips, 12" (30.5 cm)
4004-54 2 mm straight tips, 12″ (30.5 cm)
n DeBakey Forceps, Flat Handle
StraightDeBakey Tips
4004-43
4004-44
25º Angled DeBakey Tips
StraightDeBakey Tips
StraightDeBakey Tips
n SCANLAN® Micro Forceps, 1 mm Straight DeBakey Tips, Round Handle, Lightweight
n Dennis Micro Forceps, 1 mm Straight DeBakey Tips, Round Handle, Counter Balanced
Cat. No. Description4004-230 7 1/8" (18.1 cm)
4004-232 8 1/4" (21 cm)
Cat. No. Description4004-270 7" (18 cm)
4004-272 8 1/4" (21 cm)
4004-232
4004-272
Cat. No. Description4004-97 Straight tips, 7 1/8″ (18.1 cm)
* 4004-97A Curved tips, 7 1/8″ (18.1 cm)
n SCANLAN® Micro Forceps, Lightweight, DIAMOND DUST™ Tips, Round Handle
StraightDIAMOND DUST™
Curved DIAMOND DUST™
4004-97
FOR
CE
PS
FOR
CE
PS
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
forc
eps/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
forc
eps/
3.173.16
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
DeBakey n Flat Handle n Fine to Medium TipsRound Handle n Fine Tips
n CushingForceps,StraightCarbon-InlayTips,FlatHandle(GoldHandle)
n Brophy Tissue Forceps, Cardiovascular, Fine 1x2 teeth
Cat. No. Description4004-56 7″ (18 cm)
4004-57 8 1/4" (21 cm)
4004-59 10" (25.4 cm)
Cat. No. Description3190-08 8" (20 cm)
StraightCarbon-Inlay Tips
Cardiovascular1x2 Teeth
4004-56
3190-08
n SCANLAN® DeBakey Needle Pulling Tissue Forceps, Lightweight, Straight Micro Carbon-InlayTips,RoundHandle(GoldHandle)
n DeBakey Needle Pulling Tissue Forceps, 2 mm Straight Carbon-Inlay Tips, Flat Handle
Cat. No. Description4004-266 2 mm tips, 7 1/4" (18.5 cm)
4004-268 Fine tips, 7 1/4″ (18.5 cm)
4004-269 Fine tips, 8 1/4" (21 cm)
Cat. No. Description4004-37 7 1/2″ (19 cm)
Fine Straight DeBakeyCarbon-Inlay Tips
Straight DeBakeyCarbon-Inlay Tips
Straight DeBakeyCarbon-Inlay Tips
4004-268
4004-37
FOR
CE
PS
FOR
CE
PS
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
forc
eps/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
forc
eps/
3.193.18
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
General / Fine to Medium TipsDeBakey n Needle Pulling Tissue Forceps
n Thumb Forceps, Straight DIAMOND DUST™ Tips, Flat Handle
Cat. No. Description* 4004-80 1 mm tips, 6 1/4" (16 cm)
4004-84 1 mm tips, 7 3/8" (18.8 cm)
* 4004-86 2 mm tips, 7 3/8" (18.8 cm)
4004-88 1 mm tips, 8″ (20 cm)
* 4004-90 2 mm tips, 8" (20 cm)
* 4004-92 1 mm tips, 9 3/4" (24.8 cm)
* 4004-94 2 mm tips, 9 3/4" (24.8 cm)
StraightDIAMOND-DUST™ Tips
4004-88
n Gillies Thumb Forceps, Straight Tips, Flat Handle
Cat. No. Description* 4004-65 1 mm DIAMOND DUST™ tips, 8" (20 cm)
4004-65
StraightDIAMOND-DUST™ Tips
n McIndoe Forceps, Straight Serrated Tips, Flat Handle
Cat. No. Description4004-62 2 mm tips, 6" (15 cm)
4004-63 Fine 1x2 teeth, 6 1/4″ (15.5 cm)
Straight Serrated Tips1x2 Teeth
Straight Serrated Tips
4004-63
FOR
CE
PS
FOR
CE
PS
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
forc
eps/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
forc
eps/
3.213.20
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
General / Fine to Medium TipsGeneral / Fine to Medium Tips
n Adson Forceps, Straight Tips, Flat Handle
n Broli-Adson Forceps, 1.2 mm Tips, Flat Handle
Cat. No. Description* 4004-25 1.2 mm serrated tips, 4 3/4" (12 cm)
4004-27 1.2 mm DIAMOND DUST™ tips, 4 3/4" (12 cm)
4004-28 1.2 mm platform tips, 1x2 teeth, 4 3/4" (12 cm)
4004-29 1.2 mm tips, 1x2 teeth, 4 3/4" (12 cm)
Cat. No. Description4004-31 Straight serrated tips, 6" (15 cm)
* 4004-35 Straight tips, 1x2 teeth, 6" (15 cm)
4004-29
4004-31
Straight Serrated Tips Straight Platform DIAMOND DUST™
Straight DIAMOND DUST™
Straight Platform Tip 1x2 Teeth
Straight Tip 1x2 Teeth
n Jewelers Forceps, Sharp Flat Tips, Flat Handle
n Suture Tying Forceps, DIAMOND DUST™ Platform Tips, Round Handle
Cat. No. Description* 4004-05 Straight tips, 4 1/4" (11 cm)
* 4004-07 Straight DIAMOND DUST™ tips, 4 1/4" (11 cm)
* 4004-17 Straight tips, 5 1/8" (13 cm)
* 4004-19 Straight DIAMOND DUST™ tips, 5 1/8" (13 cm)
* 4004-23 45° angled DIAMOND DUST™ tips, 5 1/8" (13 cm)
Cat. No. Description* 4004-01 Straight tips, 4 3/4" (12 cm)
* 4004-02 Curved tips, 4 3/4" (12 cm)
* 4004-03 Straight tips, 5 1/2" (14 cm)
* 4004-04 Curved tips, 5 1/2" (14 cm)
Straight Tips
4004-19
4004-02
StraightDIAMOND-DUST™ Tips
Straight PlatformDIAMOND-DUST™ Tips
45º Angled DIAMOND-DUST™ Tips
Curved Platform DIAMOND-DUST™ Tips
FOR
CE
PS
FOR
CE
PS
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
forc
eps/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
forc
eps/
3.233.22
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Specialty n Small Vascular / Plastic SurgerySpecialty n Small Vascular / Plastic Surgery
n Suction Forceps, One Suction Cannula
Cat. No. Description* 4004-108 Potts-Smith Forceps, straight serrated tips, 8" (20 cm)
* 4004-124 DeBakey Forceps, straight tips, 8 1/2" (21.5 cm)
* 4004-125 Broli-Adson Forceps, 1.2 mm straight serrated tips, 6 3/4" (17 cm)
4004-125
Straight Serrated Tips Straight DeBakeyTips
Straight Tip 1x2 Teeth
n ResanoValveForceps,Multi-Toothed,FlatHandle(forheartvalveremoval)
Cat. No. Description4004-394 9″ (23 cm)
Multi-Toothed Tips
4004-394
Specialty n Suction
FOR
CE
PS
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
forc
eps/
3.24
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Specialty n Flat Handle n Resano Valve
NE
ED
LE H
OLD
ER
Sht
tp://
ww
w.s
canl
anin
tern
atio
nal.c
om/in
stru
men
tatio
n/ne
edle
-hol
ders
/Use your Smart Phone
and QR Reader software to photograph the code below which will take
you to this section on the Scanlan Website
SPRING STYLE NEEDLE HOLDERS Round Handle, Micro Jaws ............................................. 4.14 Round Handle, Heavy Jaws ............................................ 4.19 Flat Handle, Micro Jaws .................................................. 4.20
RING HANDLE NEEDLE HOLDERS Micro Jaws ...................................................................... 4.23 Delicate to Fine Jaws .......................................................4.25 Fine Jaws .........................................................................4.26 Heavy Jaws ......................................................................4.27
TITANIUM SPRING STYLE NEEDLE HOLDERS LEGACY Round Handle ................................................... 4.1 Round Handle, Micro Jaws ............................................... 4.4 Round Handle, Heavy Jaws .............................................. 4.6 Flat Handle, Micro Jaws .................................................... 4.7 Flat Handle, Heavy Jaws ....................................................4.9
TITANIUM RING HANDLE NEEDLE HOLDERS Micro Jaws ..................................................................... 4.10 Heavy Jaws ..................................................................... 4.13
NE
ED
LE H
OLD
ER
Sht
tp://
ww
w.s
canl
anin
tern
atio
nal.c
om/in
stru
men
tatio
n/ne
edle
-hol
ders
/
3003-204
3003-180
6006-32
3003-204 with modifications 971
3003-180 with modifications 905
6006-32 with modifications 928
Modification Description905 Cut down jaws/tips
905E Cut down jaws/tips 0.4 mm
905TC Cut down carbon-inlay jaws/tip
915 Gold plating
923 Satin finish instrument
924 Tension modification
928 Modify to left-handed instrument (ring handle)
928A Modify to left-handed instrument (spring style)
929 Special etching
971 Lengthen instrument
973 Shorten instrument
SCANLAN® INSTRUMENTATION
SUTURE SIZE GUIDE for SCANLAN® Needle Holders
The use of suture needles larger than those recommended may result in damage and invalidate your warranty. The following recommendations are made regarding the use of suture needles with SCANLAN® instrumentation. This update supercedes all previous reference materials.7-0 Suture and Smaller • Catalog Numbers
2813-00 through 2813-05 3003-171 through 3003-391 (odd numbers) 6006-44 through 6006-47 6006-70 through 6006-76 6006-121, 6006-123 6006-125, 6006-127 through 6006-135 6006-205 through 6006-218 6006-342 through 6006-348 9009-541 through 9009-543
6-0 and Smaller • Catalog Numbers 3003-450 through 3003-454 3003-866 through 3003-872
5-0 Suture and Smaller • Catalog Numbers 3003-90 through 3003-94A 3003-170 through 3003-200 (even numbers) 3003-202 through 3003-249 (even numbers) 3003-352 through 3003-358 3003-390 3003-412 through 3003-468 3788-12 through 3788-15 3789-11 through 3789-14 4155-06 through 4157-79 6006-02 through 6006-04 6006-20 through 6006-42 6006-48 through 6006-68 6006-82 through 6006-120 6006-122, 6006-124, 6006-126 6006-138 through 6006-177 9009-550 through 9009-553 9009-618, 9009-648, 9009-648-9, 9009-650
4-0 Suture and Smaller • Catalog Numbers 9009-560 through 9009-563 9009-640 through 9009-642
3-0 Suture and Smaller • Catalog Numbers 3003-362 through 368 6006-06 through 6006-14 6006-17, 6006-19
2-0 Suture and Smaller • Catalog Numbers 3003-402 through 3003-408 3003-510 through 3003-586 6006-15, 6006-16 6006-310 through 6006- 632 9009-570 through 9009-573 9909-610 through 9909-612 9909-916, 9909-916CI
#5 Wire and Smaller • Catalog Number 6006-05
For more information, contact your local Scanlan distributor or call: U.S. & Canada 800-328-9458, International 651-298-0997 or FAX 651-298-0018.
Needle Holders n Modifications
NE
ED
LE H
OLD
ER
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
titan
ium
/nee
dle-
hold
ers/
4.1
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Cat. No. DescriptionNEW 3003-342 With ratchet, 7″ (18 cm)
NEW 3003-344 With ratchet, 8″ (20 cm)
NEW 3003-346 With ratchet, 9″ (23 cm)
NEW 3003-348 With ratchet, 10″ (25.4 cm)
n SCANLAN® LEGACY Needle Holders, 10 mm Diameter Extended Knurling, DIAMOND DUST™ Jaws, Round HandleStraight Jaws - Regular Box LockRecommended suture size: 7-0 and smaller
StraightDIAMOND DUST™ Jaws
3003-344
Instrument jaws are shownapproximate size
Instrument jaws are shownapproximate size
Titanium n Spring Style n Round Handle n LEGACY
Cat. No. Description3003-390 With ratchet, 9″ (23 cm)
n SCANLAN® LEGACY Puskas™ Jacobson Micro Needle Holders, 8 mm Diameter Extended Knurling, DIAMOND DUST™ Jaws, Round Handle
Straight Jaws - Streamline Box LockRecommended suture size: 5-0 and smaller
Straight Jaws - Regular Box LockRecommended suture size: 7-0 and smaller
Cat. No. Description3003-381 With ratchet, 8 1/4″ (21 cm)
3003-391 With ratchet, 9 1/2″ (24 cm)
3003-381
Instrument jaws are shownapproximate size
Instrument jaws are shownapproximate size
Instrument jaws are shownapproximate sizeStraight
DIAMOND DUST™ Jaws
Straight Jaws - Streamline Box LockRecommended suture size: 3-0 and smaller
Cat. No. DescriptionNEW 3003-362 With ratchet, 7″ (18 cm)
NEW 3003-364 With ratchet, 8″ (20 cm)
NEW 3003-366 With ratchet, 9″ (23 cm)
NEW 3003-368 With ratchet, 10″ (25.4 cm)
Cat. No. Description3003-352 With ratchet, 7″ (18 cm)
3003-354 With ratchet, 8″ (20 cm)
3003-356 With ratchet, 9″ (23 cm)
3003-358 With ratchet, 10″ (25.4 cm)
Straight Jaws - Streamline Box LockRecommended suture size: 5-0 and smaller
n SCANLAN® LEGACY Jacobson Micro Needle Holders, 10 mm Diameter Extended Knurling, DIAMOND DUST™ Jaws, Round Handle
3003-354
Instrument jaws are shownapproximate size
Instrument jaws are shownapproximate size
Instrument jaws are shownapproximate size
StraightDIAMOND DUST™ Jaws
NE
ED
LE H
OLD
ER
S
NE
ED
LE H
OLD
ER
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
titan
ium
/nee
dle-
hold
ers/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
titan
ium
/nee
dle-
hold
ers/
4.34.2
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Titanium n Spring Style n Round Handle n LEGACYTitanium n Spring Style n Round Handle n LEGACY
n Jacobson Micro Needle Holders, DIAMOND DUST™ Jaws, Round Handle
Cat. No. Description Cat. No. Description3003-170 With ratchet, 7 1/4″ (18.5 cm) 3003-171 With ratchet, 7 1/4″ (18.5 cm)
3003-172 Without ratchet, 7 1/4″ (18.5 cm) * 3003-173 Without ratchet, 7 1/4″ (18.5 cm)
3003-180 With ratchet, 8″ (20 cm) 3003-181 With ratchet, 8″ (20 cm)
3003-182 Without ratchet, 8″ (20 cm) * 3003-183 Without ratchet, 8″ (20 cm)
3003-190 With ratchet, 9″ (23 cm) 3003-191 With ratchet, 9″ (23 cm)
3003-200 With ratchet, 10″ (25.4 cm) * 3003-193 Without ratchet, 9″ (23 cm)
* 3003-202 Without ratchet, 10″ (25.4 cm)
* 3003-200-12 With ratchet, 12″ (30.5 cm)
Cat. No. Description Cat. No. Description3003-174 With ratchet, 7 1/4" (18.5 cm) * 3003-175 With ratchet, 7 1/4" (18.5 cm)
3003-184 With ratchet, 8" (20 cm) * 3003-177 Without ratchet, 7 1/4" (18.5 cm)
* 3003-204 With ratchet, 10" (25.4 cm) * 3003-185 With ratchet, 8" (20 cm)
* 3003-195 With ratchet, 9" (23 cm)
Straight Jaws - Streamline Box LockRecommended suture size: 5-0 and smaller
Curved Jaws - Streamline Box LockRecommended suture size: 5-0 and smaller
Straight Jaws - Regular Box Lock Recommended suture size: 7-0 and smaller
Curved Jaws - Regular Box Lock Recommended suture size: 7-0 and smaller
3003-180
Instrument jaws are shownapproximate size
Instrument jaws are shownapproximate size
Instrument jaws are shownapproximate size
Instrument jaws are shownapproximate size
Instrument jaws are shownapproximate size
StraightDIAMOND DUST™ Jaws
Curved DIAMOND DUST™ Jaws
Cat. No. Description* 3003-90A Straight jaws, with ratchet, 4 3/4" (12 cm)
* 3003-93 Straight jaws, without ratchet, 6" (15 cm)
3003-93A Straight jaws, with ratchet, 6" (15 cm)
* 3003-94A Curved jaws, with ratchet, 6" (15 cm)
n Castroviejo Micro Needle Holders, Streamline Box Lock, DIAMOND DUST™ Jaws, Round Handle
Recommended suture size: 5-0 and smaller
3003-93
Instrument jaws are shownapproximate sizeStraight
DIAMOND DUST™ JawsCurved
DIAMOND DUST™ Jaws
NE
ED
LE H
OLD
ER
S
NE
ED
LE H
OLD
ER
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
titan
ium
/nee
dle-
hold
ers/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
titan
ium
/nee
dle-
hold
ers/
4.54.4
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Titanium n Spring Style n Round Handle n Micro JawsTitanium n Spring Style n Round Handle n Micro Jaws
n Micro Needle Holders, DIAMOND DUST™ Jaws, Flat Handle
Cat. No. Description3003-224 With ratchet, 7 1/4″ (18.5 cm)
3003-226 Without ratchet, 7 1/4" (18.5 cm)
3003-234 With ratchet, 8 1/2″ (21.5 cm)
3003-234-1 Fine jaws, with ratchet, 8 1/2″ (21.5 cm)
3003-236 Without ratchet, 8 1/2″ (21.5 cm)
Cat. No. Description3003-207 With ratchet, 5 3/4" (14.5 cm)
3003-225 With ratchet, 7 1/4″ (18.5 cm)
* 3003-227 Without ratchet, 7 1/4″ (18.5 cm)
3003-235 With ratchet, 8 1/4" (21 cm)
* 3003-237 Without ratchet, 8 1/4" (21 cm)
3003-243 With ratchet, 9 1/2" (24 cm)
Cat. No. Description* 3003-229 With ratchet, 7 1/4" (18.5 cm)
* 3003-239 With ratchet, 8 1/4" (21 cm)
Straight Jaws - Streamline Box LockRecommended suture size: 5-0 and smaller
Straight Jaws - Regular Box LockRecommended suture size: 7-0 and smaller
Curved Jaws - Regular Box LockRecommended suture size: 7-0 and smaller
3003-224
Instrument jaws are shownapproximate sizeStraight
DIAMOND DUST™ Jaws
Instrument jaws are shownapproximate size
Instrument jaws are shownapproximate size
Instrument jaws are shownapproximate size
Curved DIAMOND DUST™ Jaws
Cat. No. Description3003-510 Straight jaws, with ratchet, 7 1/2″ (19 cm)
3003-530 Straight jaws, with ratchet, 9″ (23 cm)
3003-540 Straight jaws, with ratchet, 10″ (25.4 cm)
n Jacobson Needle Holders (for large needles), Streamline Box Lock, DIAMOND DUST™ Jaws, Round Handle
Recommended suture size: 2-0 and smaller
3003-530
Instrument jaws are shownapproximate size
Instrument jaws are shownapproximate size
StraightDIAMOND DUST™ Jaws
NE
ED
LE H
OLD
ER
S
NE
ED
LE H
OLD
ER
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
titan
ium
/nee
dle-
hold
ers/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
titan
ium
/nee
dle-
hold
ers/
4.74.6
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Titanium n Spring Style n Flat Handle n Micro JawsTitanium n Spring Style n Round Handle n Heavy Jaws
n Rendina Needle Holders (for large needles), Streamline Box Lock, DIAMOND DUST™ Jaws, Flat Handle Anniversary Knurl
Cat. No. Description* 3003-550 Straight jaws, with ratchet, 7 1/2" (19 cm)
* 3003-570 Straight jaws, with ratchet, 9" (23 cm)
3003-580 Straight jaws, with ratchet, 10″ (25.4 cm)
Recommended suture size: 2-0 and smaller
3003-580
Instrument jaws are shownapproximate sizeStraight
DIAMOND DUST™ JawsCurved
DIAMOND DUST™ Jaws
Cat. No. Description3003-261 Straight jaws, with ratchet, 8″ (20 cm)
* 3003-263 Straight jaws, without ratchet, 8″ (20 cm)
* 3003-265 Curved jaws, with ratchet, 8″ (20 cm)
n Jacobson Micro Needle Holders, Regular Box Lock, DIAMOND DUST™ Jaws, Flat Knurled Handle
Recommended suture size: 7-0 and smaller
3003-261
Instrument jaws are shownapproximate sizeStraight
DIAMOND DUST™ JawsCurved
DIAMOND DUST™ Jaws
NE
ED
LE H
OLD
ER
S
NE
ED
LE H
OLD
ER
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
titan
ium
/nee
dle-
hold
ers/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
titan
ium
/nee
dle-
hold
ers/
4.94.8
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Titanium n Spring Style n Flat Handle n Rendina n Heavy JawsTitanium n Spring Style n Flat Handle n Micro Jaws
n DeBakey Needle Holders, Straight DIAMOND DUST™ Jaws, Ring Handle
n Cardiovascular Needle Holders, Straight DIAMOND DUST™ Ryder Style Jaws, Ring Handle
Cat. No. Description3003-412 7 1/8" (18.1 cm)
* 3003-414 8" (20 cm)
* 3003-416 8 5/8" (21.9 cm)
3003-418 10" (25.4 cm)
Cat. No. Description* 3003-436 7 1/8" (18.1 cm)
* 3003-438 8" (20 cm)
* 3003-440 8 5/8" (21.9 cm)
3003-442 10" (25.4 cm)
Recommended suture size: 5-0 and smaller
Recommended suture size: 5-0 and smaller
3003-412
3003-436
Instrument jaws are shown
approximate size
Instrument jaws are shown
approximate size
StraightDIAMOND DUST™ Jaws
StraightDIAMOND DUST™ Jaws
n Richards Micro Needle Holders, Extra Fine Straight DIAMOND DUST™ Jaws, Ring Handle
n Ryder Needle Holders, Straight DIAMOND DUST™ Jaws, Ring Handle
Cat. No. Description* 3003-450 6" (15 cm)
* 3003-452 6 3/4" (17 cm)
* 3003-454 7 1/2" (19 cm)
Cat. No. Description3003-430 6" (15 cm)
3003-432 6 3/4" (17 cm)
3003-434 7 1/2" (19 cm)
Recommended suture size: 6-0 and smaller
Recommended suture size: 5-0 and smaller
3003-450
3003-430
Instrument jaws are shown
approximate size
Instrument jaws are shown
approximate size
StraightDIAMOND DUST™ Jaws
StraightDIAMOND DUST™ Jaws
NE
ED
LE H
OLD
ER
S
NE
ED
LE H
OLD
ER
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
titan
ium
/nee
dle-
hold
ers/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
titan
ium
/nee
dle-
hold
ers/
4.114.10
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Titanium n Ring Handle n Micro JawsTitanium n Ring Handle n Micro Jaws
n Mayo-Hegar Needle Holders, Straight DIAMOND DUST™ Jaws, Ring Handle
Cat. No. Description3003-402 6 1/4" (16 cm)
* 3003-404 7 1/8" (18.1 cm)
3003-406 8" (20 cm)
3003-408 8 5/8" (21.9 cm)
Recommended suture size: 2-0 and smaller
3003-406
Instrument jaws are shownapproximate sizeStraight
DIAMOND DUST™ Jaws
n Microvascular Needle Holders, Straight DIAMOND DUST™ Jaws, Ring Handle
n SCANLAN® Micro Needle Holders, DIAMOND DUST™ Jaws, Ring Handle
Cat. No. Description3003-422 7 1/8" (18.1 cm)
* 3003-424 8" (20 cm)
* 3003-426 8 5/8" (21.9 cm)
3003-428 10" (25.4 cm)
Cat. No. Description3003-462 Straight jaws, 7 1/4" (18.5 cm)
* 3003-464 Curved jaws, 7 1/4" (18.5 cm)
3003-466 Straight jaws, 8 3/4" (22 cm)
Recommended suture size: 5-0 and smaller
Recommended suture size: 5-0 and smaller
3003-422
3003-462
Instrument jaws are shown
approximate size
Instrument jaws are shown
approximate size
StraightDIAMOND DUST™ Jaws
StraightDIAMOND DUST™ Jaws
Curved DIAMOND DUST™ Jaws
NE
ED
LE H
OLD
ER
S
NE
ED
LE H
OLD
ER
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
titan
ium
/nee
dle-
hold
ers/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
titan
ium
/nee
dle-
hold
ers/
4.134.12
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Titanium n Ring Handle n Heavy JawsTitanium n Ring Handle n Micro Jaws
n Castroviejo Micro Needle Holders, DIAMOND DUST™ Jaws, Regular Box Lock, Round Handle, 5 3/4″ (14.5 cm)
n Castroviejo Micro Needle Holders, DIAMOND DUST™ Jaws, Regular Box Lock, Round Handle, 4 3/4″ (12 cm)
Cat. No. Description6006-50 Straight jaws, with ratchet
* 6006-52 Straight jaws, without ratchet
* 6006-54 Curved jaws, with ratchet
* 6006-56 Curved jaws, without ratchet
Cat. No. Description6006-44 Straight jaws, with ratchet
Recommended suture size: 5-0 and smaller
Recommended suture size: 7-0 and smaller
6006-50
6006-44
Instrument jaws are shownapproximate size
Instrument jaws are shownapproximate size
StraightDIAMOND DUST™ Jaws
StraightDIAMOND DUST™ Jaws
Curved DIAMOND DUST™ Jaws
n Glasser Micro Needle Holders, Inside Spring, DIAMOND DUST™ Jaws, Regular Box Lock, with Ratchet, Round Handle
Cat. No. Description6006-48 Straight jaws, 4 7/8" (12.4 cm)
* 6006-139 Curved jaws, 7" (18 cm)
Recommended suture size: 5-0 and smaller
6006-48
Instrument jaws are shownapproximate sizeStraight
DIAMOND DUST™ JawsCurved
DIAMOND DUST™ Jaws
NE
ED
LE H
OLD
ER
S
NE
ED
LE H
OLD
ER
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
need
le-h
olde
rs/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
need
le-h
olde
rs/
4.154.14
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Spring Style n Round Handle n Micro JawsSpring Style n Round Handle n Micro Jaws
n Jacobson Micro Needle Holders, DIAMOND DUST™ Jaws, Streamline Box Lock, Round Handle, 8 1/4″ (21 cm)
Cat. No. Description6006-120 Straight jaws, with ratchet
6006-122 Straight jaws, without ratchet
6006-124 Curved jaws, with ratchet
Recommended suture size: 5-0 and smaller
CurvedDIAMOND DUST™ Jaws
6006-120
Instrument jaws are shownapproximate sizeStraight
DIAMOND DUST™ Jaws
n Jacobson Micro Needle Holders, DIAMOND DUST™ Jaws, Regular Box Lock, Round Handle, 8 1/4″ (21 cm)
Cat. No. Description6006-121 Straight jaws, with ratchet
6006-123 Straight jaws, without ratchet
6006-125 Curved jaws, with ratchet
* 6006-127 Curved jaws, without ratchet
Recommended suture size: 7-0 and smaller
6006-121
Instrument jaws are shownapproximate sizeStraight
DIAMOND DUST™ JawsCurved
DIAMOND DUST™ Jaws
n Jacobson Micro Needle Holders, DIAMOND DUST™ Jaws, Regular Box Lock, Round Handle, 6 1/4″ (16 cm)
Cat. No. Description6006-59 Straight jaws, with ratchet
* 6006-61 Straight jaws, without ratchet
* 6006-63 Curved jaws, with ratchet
Recommended suture size: 5-0 and smaller
6006-59
Instrument jaws are shownapproximate sizeStraight
DIAMOND DUST™ JawsCurved
DIAMOND DUST™ Jaws
n Jacobson Micro Needle Holders, DIAMOND DUST™ Jaws, Regular Box Lock, Round Handle, 7 1/4″ (18.5 cm)
Cat. No. Description6006-82 Straight jaws, with ratchet
6006-84 Straight jaws, without ratchet
6006-86 Curved jaws, with ratchet
* 6006-88 Curved jaws, without ratchet
Recommended suture size: 5-0 and smaller
6006-82
Instrument jaws are shownapproximate sizeStraight
DIAMOND DUST™ JawsCurved
DIAMOND DUST™ Jaws
NE
ED
LE H
OLD
ER
S
NE
ED
LE H
OLD
ER
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
need
le-h
olde
rs/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
need
le-h
olde
rs/
4.174.16
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Spring Style n Round Handle n Micro JawsSpring Style n Round Handle n Micro Jaws
n SCANLAN® Jacobson Heavy Style Needle Holders (for large needles), DIAMOND DUST™ Jaws, Regular Box Lock, Round Handle
Cat. No. Description6006-310 Straight jaws, with ratchet, 7 1/2″ (19 cm)
6006-330 Straight jaws, with ratchet, 9″ (23 cm)
* 6006-334 Curved jaws, with ratchet, 9″ (23 cm)
6006-340 Straight jaws, with ratchet, 10″ (25.4 cm)
Recommended suture size: 2-0 and smaller
6006-330
Instrument jaws are shownapproximate sizeStraight
DIAMOND DUST™ JawsCurved
DIAMOND DUST™ Jaws
n Jacobson Micro Needle Holders, DIAMOND DUST™ Jaws, Regular Box Lock, Round Handle (Short Knurling), 9″ (23 cm)
Cat. No. Description6006-128 Straight jaws, with ratchet
6006-130 Straight jaws, without ratchet
* 6006-132 Curved jaws, with ratchet
Recommended suture size: 7-0 and smaller
6006-128
Instrument jaws are shownapproximate sizeStraight
DIAMOND DUST™ JawsCurved
DIAMOND DUST™ Jaws
n Jacobson Micro Needle Holders, DIAMOND DUST™ Jaws, Regular Box Lock, Round Handle, 9″ (23 cm)
Cat. No. Description6006-129 Straight jaws, with ratchet
6006-131 Straight jaws, without ratchet
6006-133 Curved jaws, with ratchet
Recommended suture size: 7-0 and smaller
6006-129
Instrument jaws are shownapproximate size
StraightDIAMOND DUST™ Jaws
Curved DIAMOND DUST™ Jaws
NE
ED
LE H
OLD
ER
S
NE
ED
LE H
OLD
ER
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
need
le-h
olde
rs/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
need
le-h
olde
rs/
4.194.18
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Spring Style n Round Handle n Heavy JawsSpring Style n Round Handle n Micro Jaws
n Jacobson Micro Needle Holder, DIAMOND DUST™ Jaws, Regular Box Lock, Flat Handle
Cat. No. Description6006-108 Straight jaws, with ratchet, 8 1/4″ (21 cm)
6006-110 Straight jaws, without ratchet, 8 1/4″ (21 cm)
6006-112 Curved jaws, with ratchet, 8 1/4″ (21 cm)
6006-158 Straight jaws, with ratchet, 9 1/2″ (24 cm)
6006-159 Straight jaws, without ratchet, 9 1/2″ (24 cm)
* 6006-160 Curved jaws, with ratchet, 9 1/2″ (24 cm)
Recommended suture size: 5-0 and smaller
6006-108
Instrument jaws are shownapproximate sizeStraight
DIAMOND DUST™ JawsCurved
DIAMOND DUST™ Jaws
n Jacobson Micro Needle Holders, DIAMOND DUST™ Jaws, Regular Box Lock, Flat Handle, 7 1/4″ (18.5 cm)
Cat. No. Description6006-90 Straight jaws
6006-92 Straight jaws, without ratchet
* 6006-94 Curved jaws, with ratchet
Recommended suture size: 5-0 and smaller
6006-90
Instrument jaws are shownapproximate sizeStraight
DIAMOND DUST™ JawsCurved
DIAMOND DUST™ Jaws
n Castroviejo Micro Needle Holders, DIAMOND DUST™ Jaws, Regular Box Lock, Flat Handle, 5 1/2″ (14 cm)
n Jacobson Micro Needle Holders, DIAMOND DUST™ Jaws, Regular Box Lock, Flat Handle, 6 3/4″ (17 cm)
Cat. No. Description6006-58 Straight jaws, with ratchet
* 6006-62 Curved jaws, with ratchet
Cat. No. Description6006-70 Straight jaws, with ratchet
* 6006-72 Straight jaws, without ratchet
Recommended suture size: 5-0 and smaller
Recommended suture size: 7-0 and smaller
StraightDIAMOND DUST™ Jaws
StraightDIAMOND DUST™ Jaws
6006-58
6006-70
Instrument jaws are shownapproximate size
Instrument jaws are shownapproximate size
CurvedDIAMOND DUST™ Jaws
NE
ED
LE H
OLD
ER
S
NE
ED
LE H
OLD
ER
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
need
le-h
olde
rs/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
need
le-h
olde
rs/
4.214.20
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Spring Style n Flat Handle n Micro JawsSpring Style n Flat Handle n Micro Jaws
n Jacobson Micro Needle Holders, DIAMOND DUST™ Jaws, Ring Handle
Cat. No. Description* 6006-148 Straight jaws, 7 1/4" (18.5 cm)
* 6006-152 Straight jaws, 9" (23 cm)
Recommended suture size: 5-0 and smaller
StraightDIAMOND DUST™ Jaws
6006-148
Instrument jaws are shownapproximate size
n Jacobson Micro Needle Holders, DIAMOND DUST™ Jaws, Regular Box Lock, Flat Knurled Handle
Cat. No. Description6006-170 Straight jaws, with ratchet, 7 1/4" (18.5 cm)
6006-100 Straight jaws, with ratchet, 8″ (20 cm)
6006-102 Straight jaws, without ratchet, 8″ (20 cm)
* 6006-104 Curved jaws, with ratchet, 8″ (20 cm)
6006-174 Straight jaws, with ratchet, 9" (23 cm)
Recommended suture size: 5-0 and smaller
6006-100
Instrument jaws are shownapproximate sizeStraight
DIAMOND DUST™ JawsCurved
DIAMOND DUST™ Jaws
NE
ED
LE H
OLD
ER
S
NE
ED
LE H
OLD
ER
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
need
le-h
olde
rs/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
need
le-h
olde
rs/
4.234.22
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Spring Style n Ring Handle n Micro JawsSpring Style n Flat Handle n Micro Jaws
n Dennis Delicate Needle Holders, Straight DIAMOND DUST™ Jaws, Ring Handle
n SCANLAN® Micro Needle Holders, Ryder-Style, Straight DIAMOND DUST™ Jaws, Ring Handle
Cat. No. Description6006-04 7" (18 cm)
Cat. No. Description* 6006-02 1.5 mm jaws, 6 1/4" (16 cm)
6006-29 1.2 mm jaws, 6 1/4" (16 cm)
6006-33 1.2 mm jaws, 7 1/4" (18.5 cm)
6006-37 1.2 mm jaws, 8 3/4" (22 cm)
* 6006-41 1.2 mm jaws, 10" (25.4 cm)
Recommended suture size: 5-0 and smaller
Recommended suture size: 5-0 and smaller
StraightDIAMOND DUST™ Jaws
StraightDIAMOND DUST™ Jaws
6006-04
6006-33
Instrument jaws are shownapproximate size
Instrument jaws are shownapproximate size
n Webster Needle Holders, Straight Delicate DIAMOND DUST™ Jaws, Ring Handle
n Kaye Needle Holders/Scissors, Straight DIAMOND DUST™ Jaws, Ring Handle
Cat. No. Description4155-06 5 1/8" (13 cm)
* 4155-07 Offset bows, 5 1/8" (13 cm)
Cat. No. Description* 4157-77 4 3/4" (12 cm)
Recommended suture size: 5-0 and smaller
Recommended suture size: 5-0 and smaller
StraightDIAMOND DUST™ Jaws
StraightDIAMOND DUST™ Jaws
4155-07
4157-77
Instrument jaws are shownapproximate size
Instrument jaws are shownapproximate size
NE
ED
LE H
OLD
ER
S
NE
ED
LE H
OLD
ER
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
need
le-h
olde
rs/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
need
le-h
olde
rs/
4.254.24
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Spring Style n Ring Handle n Delicate to Fine JawsSpring Style n Ring Handle n Micro Jaws
n Fell Needle Holders, 2 mm Straight Carbon-Inlay Jaws, Ring Handle (Gold Handle)
Cat. No. Description6006-08 6″ (15 cm)
6006-10 7" (18 cm)
6006-12 8″ (20 cm)
6006-14 8 1/2" (21.5 cm)
6006-17 10 1/2" (27 cm)
6006-19 11 3/4" (29.8 cm)
Recommended suture size: 3-0 and smaller
StraightCarbon-Inlay Jaws
6006-08
Instrument jaws are shownapproximate size
n SCANLAN® Micro Needle Holders, DIAMOND DUST™ Jaws, Ring Handle
Cat. No. Description6006-20 Straight jaws, 5" (12.7 cm)
6006-24 Straight jaws, 5 3/4″ (14.5 cm)
6006-28 Straight jaws, 6 1/4″ (16 cm)
6006-32 Straight jaws, 7 1/4″ (18.5 cm)
6006-36 Straight jaws, 8 3/4″ (22 cm)
6006-40 Straight jaws, 10" (25.4 cm)
Recommended suture size: 5-0 and smaller
6006-32
Instrument jaws are shownapproximate sizeStraight
DIAMOND DUST™ Jaws NE
ED
LE H
OLD
ER
S
NE
ED
LE H
OLD
ER
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
need
le-h
olde
rs/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
need
le-h
olde
rs/
4.274.26
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Ring Handle n Heavy JawsSpring Style n Ring Handle n Fine Jaws
n Stratte Valve Needle Holders, Curved Carbon-Inlay Jaws, Ring Handle (Gold Handle)
Cat. No. Description* 6006-15 7 1/2" (19 cm)
6006-16 10″ (25.4 cm)
Recommended suture size: 2-0 and smaller
6006-16
Instrument jaws are shownapproximate size
CurvedCarbon-Inlay Jawsn SCANLAN® Heavy Style Needle Holders, DIAMOND DUST™ Jaws, Ring Handle
Cat. No. Description* 6006-610 Straight jaws, 7 1/4" (18.5 cm)
6006-620 Straight jaws, 8 1/8" (20.1 cm)
6006-630 Straight jaws, 9 1/8″ (23.5 cm)
Recommended suture size: 2-0 and smaller
6006-630
Instrument jaws are shownapproximate sizeStraight
DIAMOND DUST™ Jaws
NE
ED
LE H
OLD
ER
S
NE
ED
LE H
OLD
ER
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
need
le-h
olde
rs/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
need
le-h
olde
rs/
4.294.28
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Ring Handle n Heavy JawsRing Handle n Heavy Jaws
n SCANLAN® Sternal Needle Holders, Straight Carbon-Inlay Jaws, Ring Handle (Gold Handle)
Cat. No. Description6006-05 7" (18 cm)
Recommended wire size: #5 and smaller
6006-05
Instrument jaws are shownapproximate sizeStraight
Carbon-Inlay Jaws NE
ED
LE H
OLD
ER
Sht
tp://
ww
w.s
canl
anin
tern
atio
nal.c
om/in
stru
men
tatio
n/ne
edle
-hol
ders
/
4.31
NE
ED
LE H
OLD
ER
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
need
le-h
olde
rs/
4.30
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Ring Handle n Heavy Jaws
1
2
3
4
5
6
7
8
9
10
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25INCHES CM
NE
ED
LE H
OLD
ER
Sht
tp://
ww
w.s
canl
anin
tern
atio
nal.c
om/in
stru
men
tatio
n/ne
edle
-hol
ders
/
4.32
SC
ISS
OR
Sht
tp://
ww
w.s
canl
anin
tern
atio
nal.c
om/in
stru
men
tatio
n/sc
isso
rs/
Use your Smart Phone and QR Reader software to photograph the code below which will take
you to this section on the Scanlan Website
SPRING STYLE - MICRO Round Handle, Angled Blades .......................................... 5.1 Round Handle, Straight and Curved Blades ..................... 5.5 Flat Handle, Angled Blades ............................................... 5.6 Flat Handle, Straight and Curved Blades ........................ 5.16
RING HANDLE Diethrich-Potts ................................................................. 5.17 Favaloro .......................................................................... 5.19 Hegeman ........................................................................ 5.20 DeBakey .......................................................................... 5.21 Laine-Kindal .................................................................... 5.22 Iris-Eye / Plastic-Jabaley ................................................. 5.23 SCANLAN® / Ragnell Dissecting ..................................... 5.24 Stevens Tenotomy ........................................................... 5.25 Tenotomy Tips ................................................................. 5.26 Lillehei-Potts .................................................................... 5.28 C.V.H. / Peck Joseph ....................................................... 5.30 Mayo Harrington .............................................................. 5.31 Metzenbaum .................................................................... 5.32 Mayo ................................................................................ 5.34 Face-Lift .......................................................................... 5.35 Thompson Valve .............................................................. 5.36 Flemma Mitral / Venous Valve (In Situ) ........................... 5.36
SC
ISS
OR
Sht
tp://
ww
w.s
canl
anin
tern
atio
nal.c
om/in
stru
men
tatio
n/sc
isso
rs/
SC
ISS
OR
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
scis
sors
/
5.1
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Cat. No. Description* 7007-421 25° angled blades, 4 1/4" (11 cm)
* 7007-423 45° angled blades, 4 1/4" (11 cm)
* 7007-425 60° angled blades, 4 1/4" (11 cm)
* 7007-427 90° angled blades, 4 1/8" (10.5 cm)
* 7007-429 125° angled blades, 4 1/8" (10.5 cm)
Cat. No. Description7007-420 25° angled blades, 4 1/2″ (11.5 cm)
7007-422 45° angled blades, 4 1/2″ (11.5 cm)
7007-424 60° angled blades, 4 1/2″ (11.5 cm)
* 7007-426 90° angled blades, 4 1/4" (11 cm)
7007-428 125° angled blades, 4 1/4" (11 cm)
n Castroviejo Micro Scissors, Round Handle, Angled Fine Blades
n Castroviejo Micro Scissors, Round Handle, Angled Micro Fine Blades
25º Angled Blades
25º Angled Blades
45º Angled Blades
45º Angled Blades
60º Angled Blades
60º Angled Blades
90º Angled Blades
90º Angled Blades
125º Angled Blades
125º Angled Blades
Instrument blades are shown approximate size
Instrument blades are shown approximate size
Instrument is shownapproximate size
Instrument is shownapproximate size
7007-420
7007-421
7007-422
7007-423
Spring Style n Round Handle n Angled Blades
Modification Description905B Cut down scissors blades
907A Angled shanks on scissors - down
907C Angled shanks on scissors - up
910 Tenotomy points scissors
910A Tenotomy points ULTRA SHARP® / Super Cut™ scissors
911 Cut down shanks
912 Blunt tips of scissors
912A Sharpen tips of scissors
912B Sharpen points on ULTRA SHARP® / Super Cut™ scissors
914 Serrations of blade (one)
918 Flatten tips (Ragnell style)
923 Satin finish instrument
929 Special etching
971 Lengthen instrument
973 Shorten instrument
Fine Blades, 15 mm (7007-452)
45º Angled Fine Blades, 15 mm (7007-252SC)
Micro Fine Blades, 10 mm (7007-442)
45º Angled Micro Blades, 10 mm (7007-252-5SC)
Nano Blades, 7 mm (7007-592)
Spring Style Scissors with Angled Blades
Ring Handle Scissors with Angled Blades
7007-446-8 with modification 907A
7007-218 with modification 910A
Scissors n Modifications
7007-446-8
7007-218
Cat. No. Description7007-490 25° angled blades, 6 3/4″ (17 cm)
7007-492 45° angled blades, 6 3/4″ (17 cm)
7007-494 60° angled blades, 6 3/4″ (17 cm)
7007-496 90° angled blades, 6 1/2″ (16.5 cm)
7007-498 125° angled blades, 6 1/2″ (16.5 cm)
Cat. No. Description7007-499 6 1/2″ (16.5 cm)
n Jacobson Micro Scissors, Round Handle, Angled Micro Fine Blades
n SCANLAN® Premier™ Jacobson Micro Scissors, Round Handle, V-neck, 125° Angled Micro Fine Blades
25º Angled Blades
45º Angled Blades
90º Angled Blades
60º Angled Blades
V-Neck 125º Angled Blades
7007-499
Instrument blades are shown approximate size
Instrument blades are shown approximate size
Instrument is shownapproximate size
7007-498
7007-499
125º Angled Blades
Cat. No. Description7007-460 25° angled blades, 7″ (18 cm)
7007-462 45° angled blades, 7″ (18 cm)
7007-464 60° angled blades, 7″ (18 cm)
7007-466 90° angled blades, 7″ (18 cm)
7007-468 125° angled blades, 6 1/2″ (16.5 cm)
n Jacobson Micro Scissors, Round Handle, Angled Fine Blades
25º Angled Blades
45º Angled Blades
60º Angled Blades
90º Angled Blades
125º Angled Blades
7007-462
Instrument blades are shown approximate size
7007-462
Cat. No. Description7007-590 25° angled blades, 6 3/4″ (17 cm)
7007-592 45° angled blades, 6 3/4″ (17 cm)
7007-594 60° angled blades, 6 3/4″ (17 cm)
7007-596 90° angled blades, 6 1/2″ (16.5 cm)
7007-598 V-neck, 125° angled blades, 6 1/2″ (16.5 cm)
n SCANLAN® Premier™ Jacobson Micro Scissors, Round Handle, Angled Nano Blades
60º Angled Blades
90º Angled Blades
V-Neck 125º Angled Blades
45º Angled Blades
25º Angled Blades
Instrument blades are shown approximate size
Instrument is shownapproximate size
7007-592
7007-592
SC
ISS
OR
S
SC
ISS
OR
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
scis
sors
/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
scis
sors
/
5.35.2
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Spring Style n Round Handle n Angled BladesSpring Style n Round Handle n Angled Blades
Cat. No. Description7007-128 Straight blades, sharp tips, 7″ (18 cm)
7007-130 Curved blades, sharp tips, 7″ (18 cm)
* 7007-134 Curved blades, blunt tips, 7″ (18 cm)
Cat. No. Description* 7007-105 Straight blades, blunt tips, 4 1/4″ (11 cm)
* 7007-104 Straight blades, sharp tips, 5 1/2″ (14 cm)
* 7007-106 Straight blades, blunt tips, 5 1/2″ (14 cm)
7007-108 Curved blades, sharp tips, 5 1/2″ (14 cm)
* 7007-110 Curved blades, blunt tips, 5 1/2″ (14 cm)
n Jacobson Micro Scissors, Round Handle
n Castroviejo Micro Scissors, Round Handle
Straight Blades Sharp Tips
Straight Blades Blunt Tips
Straight Blades Sharp Tips
Curved Blades Sharp Tips
Curved Blades Sharp Tips
Curved Blades Blunt Tips
Curved Blades Blunt Tips
7007-128
7007-108
Instrument blades are shown approximate size
7007-128
Cat. No. DescriptionNEW 7007-490-8 25° angled blades, 8″ (20 cm)
NEW 7007-492-8 45° angled blades, 8″ (20 cm)
NEW 7007-494-8 60° angled blades, 8″ (20 cm)
NEW 7007-496-8 90° angled blades, 8″ (20 cm)
7007-499-8 V-neck, 125° angled blades, 8″ (20 cm)
n SCANLAN® Premier™ Jacobson Micro Scissors, Round Handle, Angled Micro Fine Blades
60º Angled Blades
25º Angled Blades
45º Angled Blades
90º Angled Blades
V-Neck 125º Angled Blades
7007-490-8
Instrument blades are shown approximate size
7007-490-8
SC
ISS
OR
S
SC
ISS
OR
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
scis
sors
/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
scis
sors
/
5.55.4
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Spring Style n Round HandleSpring Style n Round Handle n Angled Blades
Cat. No. Description7007-540 25° angled blades, 6 1/4″ (16 cm)
7007-542 45° angled blades, 6 1/4″ (16 cm)
7007-544 60° angled blades, 6 1/4″ (16 cm)
* 7007-546 90° angled blades, 6 1/8″ (15.5 cm)
7007-548 V-neck, 125° angled blades, 6 1/8″ (15.5 cm)
n SCANLAN® Premier™ Jacobson Micro Scissors, Flat Handle, Angled Nano Blades
7007-542
Instrument blades are shown approximate size
Instrument is shownapproximate size
7007-548
25º Angled Blades
45º Angled Blades
90º Angled Blades
60º Angled Blades
V-Neck 125º Angled Blades
Cat. No. Description7007-410 25° angled blades, 4 1/2″ (11.5 cm)
7007-412 45° angled blades, 4 1/2″ (11.5 cm)
7007-414 60° angled blades, 4 1/2″ (11.5 cm)
* 7007-416 90° angled blades, 4 1/4″ (11 cm)
* 7007-418 125° angled blades, 4 1/4″ (11 cm)
Cat. No. Description7007-411 25° angled blades, 4 1/4″ (11 cm)
* 7007-413 45° angled blades, 4 1/4″ (11 cm)
* 7007-415 60° angled blades, 4 1/8″ (10.5 cm)
* 7007-417 90° angled blades, 4 1/8″ (10.5 cm)
* 7007-419 125° angled blades, 4 1/8″ (10.5 cm)
n Castroviejo Micro Scissors, Flat Handle, Angled Fine Blades
n Castroviejo Micro Scissors, Flat Handle, Angled Micro Fine Blades
60º Angled Blades
60º Angled Blades
25º Angled Blades
25º Angled Blades
45º Angled Blades
45º Angled Blades
90º Angled Blades
90º Angled Blades
125º Angled Blades
125º Angled Blades
7007-410
7007-413
Instrument is shownapproximate size
Instrument is shownapproximate size
Instrument blades are shown approximate size
Instrument blades are shown approximate size
7007-410
7007-413
SC
ISS
OR
S
SC
ISS
OR
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
scis
sors
/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
scis
sors
/
5.75.6
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Spring Style n Flat Handle n Angled BladesSpring Style n Flat Handle n Angled Blades
Cat. No. DescriptionNEW 7007-440-8 25° angled blades, 8″ (20 cm)
NEW 7007-442-8 45° angled blades, 8″ (20 cm)
NEW 7007-444-8 60° angled blades, 8″ (20 cm)
NEW 7007-446-8 90° angled blades, 8″ (20 cm)
7007-449-8 V-neck, 125° angled blades, 8″ (20 cm)
n SCANLAN® Premier™ Jacobson Micro Scissors, Flat Handle, Angled Micro Fine Blades
60º Angled Blades
25º Angled Blades
45º Angled Blades
90º Angled Blades
V-Neck 125º Angled Blades
7007-440-8
Instrument blades are shown approximate size
7007-440-8
Cat. No. Description7007-440 25° angled blades, 6 1/2″ (16.5 cm)
7007-442 45° angled blades, 6 1/2″ (16.5 cm)
7007-444 60° angled blades, 6 1/2″ (16.5 cm)
7007-446 90° angled blades, 6 1/4″ (16 cm)
7007-448 125° angled blades, 6 1/4″ (16 cm)
Cat. No. Description7007-449 6 1/4″ (16 cm)
n Jacobson Micro Scissors, Flat Handle, Angled Micro Fine Blades
n SCANLAN® Premier™ Jacobson Micro Scissors, Flat Handle, V-neck, 125° Angled Micro Fine Blades
7007-442
Instrument blades are shown approximate size
Instrument blades are shown approximate size
Instrument is shownapproximate size
7007-448
7007-449
25º Angled Blades
45º Angled Blades
90º Angled Blades
60º Angled Blades
V-Neck 125º Angled Blades
125º Angled Blades
SC
ISS
OR
S
SC
ISS
OR
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
scis
sors
/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
scis
sors
/
5.95.8
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Spring Style n Flat Handle n Angled BladesSpring Style n Flat Handle n Angled Blades
Cat. No. Description* 7007-479 25° angled blades, 6 1/2″ (16.5 cm)
7007-481 45° angled blades, 6 1/2″ (16.5 cm)
* 7007-483 60° angled blades, 6 1/2″ (16.5 cm)
* 7007-485 90° angled blades, 6 1/4″ (16 cm)
* 7007-487 125° angled blades, 6 1/4″ (16 cm)
n Jacobson Micro Scissors, Flat Handle, One Blade with Bead Tip
25º Angled Blades
45º Angled Blades
60º Angled Blades
90º Angled Blades
125º Angled Blades
7007-481
Instrument is shownapproximate size
Instrument blades are shown approximate size
7007-481
Cat. No. Description7007-450 25° angled blades, sharp tips, 6 1/2″ (16.5 cm)
7007-452 45° angled blades, sharp tips, 6 1/2″ (16.5 cm)
7007-453 45° angled blades, blunt tips, 6 1/2″ (16.5 cm)
7007-454 60° angled blades, sharp tips, 6 1/2″ (16.5 cm)
7007-456 90° angled blades, sharp tips, 6 1/4″ (16 cm)
7007-458 125° angled blades, sharp tips, 6 1/4″ (16 cm)
n Jacobson Micro Scissors, Flat Handle, Angled Fine Blades
25º Angled Blades
45º Angled Blades
60º Angled Blades
90º Angled Blades
125º Angled Blades
7007-454
Instrument is shownapproximate size
Instrument blades are shown approximate size
Instrument blades are shown approximate size
7007-452
7007-453
SC
ISS
OR
S
SC
ISS
OR
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
scis
sors
/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
scis
sors
/
5.115.10
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Spring Style n Flat Handle n Angled BladesSpring Style n Flat Handle n Angled Blades
Cat. No. Description7007-511 45° angled nano blades, 8″ (20 cm)
7007-514 Reversed handle, angled left, 45° angled nano blades, 8" (20 cm)
7007-521 Angled left, V-neck, 125° angled nano blades, 8″ (20 cm)
7007-522 Angled right, V-neck, 125° angled nano blades, 8″ (20 cm)
n SCANLAN® Puskas™ Premier™ Jacobson Micro Scissors, Flat Handle, Bayonet Style
7007-511
7007-514
Instrument blades are shown approximate size
Instrument blades are shown approximate size
7007-511
7007-521
Cat. No. Description7007-506 LIMA, left 90° angled fine blades, 8" (20 cm)
7007-507 RIMA, right 90° angled fine blades, 8" (20 cm)
n SCANLAN® Puskas™ Premier™ Jacobson Micro Scissors, IMA Glide™, 45° Angled Up
7007-506
7007-507
Instrument blades are shown approximate size
IMA Glide
7007-5067007-507
7007-506
SCANLAN® Puskas™ Scissors developed in cooperation with John D. Puskas, M.D.
SC
ISS
OR
S
SC
ISS
OR
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
scis
sors
/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
scis
sors
/
5.135.12
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Spring Style n Flat Handle n Bayonet Style n Angled BladesSpring Style n Flat Handle n Angled Blades
Cat. No. Description* 7007-470 25° angled blades, 7" (18 cm)
Cat. No. Description7007-140 7" (18 cm)
n Jacobson Micro Scissors, Flat Handle, Angled on Flat Fine Blades
n Jacobson Vannas Micro Scissors, Flat Handle, 45° Angled on Flat Micro Fine Blades
25° Angled on Flat Blades
45° Angled on Flat Blades
Instrument blades are shown approximate size
Instrument blades are shown approximate size
7007-470
7007-140
7007-470
7007-140
Cat. No. Description* 7007-167 5 1/2" (14 cm)
7007-168 7 1/8″ (18.1 cm)
n MicroCircumflexScissors,FlatHandle,125°AngledFineBlades,Bayonet-Style
125º Angled Blades
Instrument blades are shown approximate size
7007-168
7007-168
SC
ISS
OR
S
SC
ISS
OR
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
scis
sors
/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
scis
sors
/
5.155.14
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Spring Style n Flat Handle n Angled BladesSpring Style n Flat Handle n Bayonet Style n Angled Blades
Super Cut™ Cat. No.
Ultra Sharp®
Cat. No. Description7007-250SC 7007-250 25° angled fine blades
7007-250-5SC 7007-250-5 25° angled micro fine blades
7007-252SC 7007-252 45° angled fine blades
7007-252-5SC 7007-252-5 45° angled micro fine blades
7007-254SC 7007-254 60° angled fine blades
7007-254-5SC * 7007-254-5 60° angled micro fine blades
7007-256SC * 7007-256 90° angled fine blades
7007-256-5SC 7007-256-5 90° angled micro fine blades
7007-258SC 7007-258 125° angled fine blades
7007-258-5SC 7007-258-5 125° angled micro fine blades
n Diethrich-Potts Scissors, Ring Handle, Angled Blades, 7″ (18 cm)
25º Angled Blades
45º Angled Blades
60º Angled Blades
90º Angled Blades
125º Angled Blades
Instrument blades are shown approximate size
Instrument blades are shown approximate size
7007-252SC
7007-252 Fine Blades
7007-252-5SC Micro Fine Blades
Corresponding SCANLAN® Super Cut™ and Ultra Sharp® scissors patterns incorporate the same blade design and unique cutting edge.Super Cut™ scissors (indicated with an ‘SC’) have a black platinum handle finish while ULTRA SHARP® scissors have a light gray, satin handle finish.
Cat. No. Description* 7007-112 Straight blades, sharp tips, 5 1/2" (14 cm)
7007-116 Curved blades, sharp tips, 5 1/2" (14 cm)
Cat. No. Description7007-120 Straight blades, sharp tips, 7" (18 cm)
7007-124 Curved blades, sharp tips, 7" (18 cm)
* 7007-126 Curved blades, sharp tips, 7" (18 cm)
n Castroviejo Micro Scissors, Flat Handle
n Jacobson Micro Scissors, Flat Handle
Straight Blades, Sharp Tips
Straight Blades, Sharp Tips
Curved Blades, Sharp Tips
Curved Blades, Sharp Tips
Curved Blades, Blunt Tips
7007-112
7007-120
SC
ISS
OR
S
SC
ISS
OR
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
scis
sors
/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
scis
sors
/
5.175.16
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Ring Handle n Diethrich-PottsSpring Style n Flat Handle n Micro
n Favaloro Scissors, Ring Handle, 125° Angled Blades, 6 3/4″ (17 cm)
n Favaloro Scissors, Ring Handle, 125° Angled Blades, 6 3/4″ (17 cm)
Instrument blades are shown approximate size
7007-260SC
Instrument is shownapproximate size
125º Angled Blades
7007-260SC
Super Cut™ Cat. No.
Ultra Sharp®
Cat. No. Description7007-260SC * 7007-260 Fine blades
7007-260-5SC * 7007-260-5 Micro fine blades
Cat. No. Description7007-50 Fine blades
* 7007-50-5 Micro fine blades
Cat. No. Description7007-40 25° angled fine blades
7007-40-5 25° angled micro fine blades
7007-42 45° angled fine blades
7007-42-5 45° angled micro fine blades
7007-44 60° angled fine blades
* 7007-44-5 60° angled micro fine blades
7007-46 90° angled fine blades
* 7007-46-5 90° angled micro fine blades
Cat. No. Description7007-48 Fine blades
* 7007-48-5 Micro fine blades
n Diethrich-Potts Scissors, Ring Handle, Angled Blades, 7″ (18 cm)
n Diethrich-Potts Scissors, Ring Handle, 125° Angled Blades, 6 3/4″ (17 cm)
25º Angled Blades
45º Angled Blades
60º Angled Blades
90º Angled Blades
Instrument blades are shown approximate size
Instrument blades are shown approximate size
7007-42
125º Angled Blades
7007-48-5
7007-48
Corresponding SCANLAN® Super Cut™ and Ultra Sharp® scissors patterns incorporate the same blade design and unique cutting edge.Super Cut™ scissors (indicated with an ‘SC’) have a black platinum handle finish while ULTRA SHARP® scissors have a light gray, satin handle finish.
SC
ISS
OR
S
SC
ISS
OR
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
scis
sors
/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
scis
sors
/
5.195.18
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Ring Handle n FavaloroRing Handle n Diethrich-Potts
25º Angled Blades
45º Angled Blades
60º Angled Blades
7007-320SC
Super Cut™ Cat. No.
Ultra Sharp®
Cat. No. Description7007-320SC 7007-320 6 1/4" (16 cm)
n DeBakey Scissors, Ring Handle, 45° Angled Blades, Blunt Tips
Cat. No. Description* 7007-30 25° angled blades, blunt tips, 6 3/4" (17 cm)
* 7007-33 45° angled blades, sharp tips, 6 1/4" (16 cm)
7007-32 45° angled blades, blunt tips, 6 1/4" (16 cm)
* 7007-35 60° angled blades, sharp tips, 6 1/4" (16 cm)
* 7007-34 60° angled blades, blunt tips, 6 1/4" (16 cm)
n DeBakey Scissors, Ring Handle
Cat. No. Description7007-25 25° angled blades
7007-26 45° angled blades
* 7007-27 60° angled blades
* 7007-28 90° angled blades
n Hegeman Scissors, Ring Handle, 5 1/2" (14 cm)
25º Angled Blades
45º Angled Blades
60º Angled Blades
90º Angled Blades
7007-26
Corresponding SCANLAN® Super Cut™ and Ultra Sharp® scissors patterns incorporate the same blade design and unique cutting edge.Super Cut™ scissors (indicated with an ‘SC’) have a black platinum handle finish while ULTRA SHARP® scissors have a light gray, satin handle finish.
SC
ISS
OR
S
SC
ISS
OR
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
scis
sors
/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
scis
sors
/
5.215.20
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Ring Handle n DeBakeyRing Handle n Hegeman
n Plastic-Jabaley Scissors, Ring Handle
n Iris-Eye Scissors, Ring Handle
7007-202SC
7007-286SC
Instrument is shownapproximate size
Instrument is shownapproximate size
Super Cut™ Cat. No.
Ultra Sharp®
Cat. No. Description7007-200SC * 7007-200 Straight blades, 4 3/4″ (12 cm)
7007-202SC * 7007-202 Curved blades, 4 3/4″ (12 cm)
Super Cut™ Cat. No.
Ultra Sharp®
Cat. No. Description 7007-282SC Straight blades, sharp tips, 4" (10 cm)
* 7007-284SC Straight blades, blunt tips, 4" (10 cm)
7007-286SC * 7007-286 Curved blades, sharp tips, 4" (10 cm)
7007-288SC Curved blades, blunt tips, 4" (10 cm)
Straight Blades, Sharp Tips
Straight Blades, Sharp Tips
Curved Blades, Sharp Tips
Curved Blades, Sharp Tips
Straight Blades, Blunt Tips
Curved Blades, Blunt Tips
Cat. No. Description* 7007-76 Sharp tips, 7 1/8" (18.1 cm)
* 7007-78 Tenotomy tips, 7 1/8" (18.1 cm)
n Laine-Kindal Scissors, Ring Handle, Curved Blades
7007-78
Curved Blades, Sharp Tips
Curved Blades, Tenotomy Tips
Corresponding SCANLAN® Super Cut™ and Ultra Sharp® scissors patterns incorporate the same blade design and unique cutting edge.Super Cut™ scissors (indicated with an ‘SC’) have a black platinum handle finish while ULTRA SHARP® scissors have a light gray, satin handle finish.
SC
ISS
OR
S
SC
ISS
OR
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
scis
sors
/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
scis
sors
/
5.235.22
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Ring Handle n Iris-Eye / Plastic-JabaleyRing Handle n Laine-Kindal
n Stevens Tenotomy Scissors, Ring Handle
Straight Blades Tenotomy Tips
Curved Blades Tenotomy Tips
7007-211SC
Super Cut™ Cat. No.
Ultra Sharp®
Cat. No. Description* 7007-208SC Straight blades, 4 5/8" (11.8 cm)
7007-210SC 7007-210 Curved blades, 4 5/8" (11.8 cm)
7007-313SC * 7007-313 Curved blades, 6" (15 cm)
7007-211SC 7007-211 Curved blades, 7" (18 cm)
7007-315SC * 7007-315 Curved blades, 8" (20 cm)
Corresponding SCANLAN® Super Cut™ and Ultra Sharp® scissors patterns incorporate the same blade design and unique cutting edge. Super Cut™ scissors (indicated with an ‘SC’) have a black platinum handle finish while ULTRA SHARP® scissors have a light gray, satin handle finish.
Cat. No. Description7007-02 Blunt tips, 5 5/8" (14.1 cm)
7007-06 Tenotomy tips, 5 1/2" (14 cm)
n SCANLAN® Dissecting Scissors, Ring Handle, Curved Blades
n SCANLAN® Ragnell Dissecting Scissors, Ring Handle, Curved Blades, Flat Tips
7007-02
7007-272SC
Curved Blades, Blunt Tips
Curved Blades, Blunt Tips
Curved Blades, Tenotomy Tips
Super Cut™ Cat. No.
Ultra Sharp®
Cat. No. Description7007-270SC 4 3/4" (12 cm)
7007-272SC 6" (15 cm)
7007-274SC * 7007-274 7" (18 cm)
7007-276SC 8" (20 cm)
7007-278SC * 7007-278 9" (23 cm)
* 7007-280SC 10 1/4" (26 cm)Corresponding SCANLAN® Super Cut™ and Ultra Sharp® scissors patterns incorporate the same blade design and unique cutting edge.Super Cut™ scissors (indicated with an ‘SC’) have a black platinum handle finish while ULTRA SHARP® scissors have a light gray, satin handle finish.
SC
ISS
OR
S
SC
ISS
OR
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
scis
sors
/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
scis
sors
/
5.255.24
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Ring Handle n Stevens TenotomyRing Handle n SCANLAN® Dissecting / Ragnell
Corresponding SCANLAN® Super Cut™ and Ultra Sharp® scissors patterns incorporate the same blade design and unique cutting edge.Super Cut™ scissors (indicated with an ‘SC’) have a black platinum handle finish while ULTRA SHARP® scissors have a light gray, satin handle finish.
Super Cut™ Cat. No.
Ultra Sharp®
Cat. No. Description* 7007-215-2SC * 7007-215-2 Straight blades, 6" (15 cm)
7007-216-2SC * 7007-216-2 Curved blades, 6" (15 cm)
7007-218-2SC * 7007-218-2 Curved blades, 7" (18 cm)
7007-220-2SC Curved blades, 8" (20 cm)
7007-222-2SC Curved blades, 9" (23 cm)
* 7007-223-2SC Straight blades, 10 1/4" (26 cm)
7007-224-2SC Curved blades, 10 1/4" (26 cm)
n Metzenbaum Scissors, Ring Handle, Tenotomy Tips
Straight Blades Tenotomy Tips
Curved Blades Tenotomy Tips
7007-218-2SC
n Lillehei-Potts Scissors, Ring Handle, Tenotomy Tips
n SCANLAN® Dissecting Scissors, Ring Handle, Curved Blades, Tenotomy Tips
Straight Blades Tenotomy Tips
Curved Blades Tenotomy Tips
Curved Blades Tenotomy Tips
7007-264SC
7007-06
Super Cut™ Cat. No.
Ultra Sharp®
Cat. No. Description7007-263SC Curved blades, 6 1/2" (16.5 cm)
7007-264SC * 7007-264 Curved blades, 7" (18 cm)
7007-296SC Curved blades, 9" (23 cm)
Cat. No. Description* 7007-58 Straight blades, 7" (18 cm)
7007-64 Curved blades, 7" (18 cm)
Cat. No. Description7007-06 5 1/2" (14 cm)
Corresponding SCANLAN® Super Cut™ and Ultra Sharp® scissors patterns incorporate the same blade design and unique cutting edge. Super Cut™ scissors (indicated with an ‘SC’) have a black platinum handle finish while ULTRA SHARP® scissors have a light gray, satin handle finish.
SC
ISS
OR
S
SC
ISS
OR
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
scis
sors
/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
scis
sors
/
5.275.26
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Ring Handle n TenotomyRing Handle n Tenotomy
n Lillehei-Potts Scissors, Ring Handle, 7" (18 cm)
Curved Blades Tenotomy Tips
Straight Blades, Sharp Tips
Straight Blades, Tenotomy Tips
Curved Blades, Sharp Tips
Curved Blades, Blunt Tips
7007-62
Cat. No. Description7007-56 Straight blades, sharp tips
* 7007-58 Straight blades, tenotomy tips
7007-62 Curved blades, sharp tips
* 7007-60 Curved blades, blunt tips
7007-64 Curved blades, tenotomy tips
7007-266SC
Corresponding SCANLAN® Super Cut™ and Ultra Sharp® scissors patterns incorporate the same blade design and unique cutting edge.Super Cut™ scissors (indicated with an ‘SC’) have a black platinum handle finish while ULTRA SHARP® scissors have a light gray, satin handle finish.
Super Cut™ Cat. No.
Ultra Sharp®
Cat. No. Description7007-262SC SCANLAN® Puskas™ “Black Knight”, Sharp tips, 6 1/2" (16.5 cm)
7007-263SC Tenotomy tips, 6 1/2" (16.5 cm)
7007-266SC Sharp tips, 7" (18 cm)
7007-268SC * 7007-268 Blunt tips, 7" (18 cm)
7007-264SC * 7007-264 Tenotomy tips, 7" (18 cm)
* 7007-298SC Sharp tips, 9" (23 cm)
* 7007-300SC * 7007-300 Blunt tips, 9" (23 cm)
7007-296SC Tenotomy tips, 9" (23 cm)
Curved Blades Tenotomy Tips
Curved Blades, Sharp Tips
Curved Blades, Blunt Tips
n Lillehei-Potts Scissors, Ring Handle, Curved Blades, 7″ (18 cm)
SC
ISS
OR
S
SC
ISS
OR
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
scis
sors
/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
scis
sors
/
5.295.28
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Ring Handle n Lillehei-PottsRing Handle n Tenotomy / Lillehei-Potts
Super Cut™ Cat. No.
Ultra Sharp®
Cat. No. Description* 7007-232SC Straight blades, 8" (20 cm)
7007-236SC * 7007-236 Curved blades, 8" (20 cm)
7007-237SC * 7007-237 Curved blades, 9" (23 cm)
* 7007-242SC * 7007-242 Curved blades, 12" (30.5 cm)
7007-236SC
n Mayo Harrington Scissors, Ring Handle
Instrument is shownapproximate size
Corresponding SCANLAN® Super Cut™ and Ultra Sharp® scissors patterns incorporate the same blade design and unique cutting edge.Super Cut™ scissors (indicated with an ‘SC’) have a black platinum handle finish while ULTRA SHARP® scissors have a light gray, satin handle finish.
Straight Blades Curved Blades
Super Cut™ Cat. No.
Ultra Sharp®
Cat. No. Description* 7007-292SC Straight blades, 6" (15 cm)
* 7007-294SC * 7007-294 Curved blades, 6" (15 cm)
Super Cut™ Cat. No.
Ultra Sharp®
Cat. No. Description* 7007-295SC * 7007-295 Curved blades, 6" (15 cm)
7007-292SC
7007-295
n C.V.H. Scissors, Ring Handle, Sharp Tips, 6" (15 cm)
n Peck Joseph Scissors, Ring Handle, Blunt Tips, 6" (15 cm)
Instrument is shownapproximate size
Instrument is shownapproximate size
Straight Blades, Sharp Tips
Curved Blades, Sharp Tips
Curved Blades, Blunt Tips
SC
ISS
OR
S
SC
ISS
OR
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
scis
sors
/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
scis
sors
/
5.315.30
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Ring Handle n Mayo HarringtonRing Handle n C.V.H. / Peck Joseph
Super Cut™ Cat. No.
Ultra Sharp®
Cat. No. Description7007-214SC * 7007-214 Curved blades, baby, 4 3/4" (12 cm)
* 7007-215-2SC Straight blades, tenotomy tips, 6" (15 cm)
7007-216SC 7007-216 Curved blades, 6" (15 cm)
7007-216-1SC * 7007-216-1 Curved blades, fine tips, 6" (15 cm)
7007-216-2SC * 7007-216-2 Curved blades, tenotomy tips, 6" (15 cm)
* 7007-217SC Straight blades, 7" (18 cm)
7007-218SC 7007-218 Curved blades, 7" (18 cm)
7007-218-1SC 7007-218-1 Curved blades, fine tips, 7" (18 cm)
7007-218-2SC * 7007-218-2 Curved blades, tenotomy tips, 7" (18 cm)
7007-218-3SC Curved blades, 2.5 mm blunt tips, 7" (18 cm)
* 7007-230SC Curved blades, left-handed, 7" (18 cm)
* 7007-219SC Straight blades, 8" (20 cm)
7007-220SC 7007-220 Curved blades, 8" (20 cm)
7007-220-1SC * 7007-220-1 Curved blades, fine tips, 8" (20 cm)
7007-220-2SC Curved blades, tenotomy tips 8" (20 cm)
* 7007-221SC Straight blades, 9" (23 cm)
7007-222SC 7007-222 Curved blades, 9" (23 cm)
7007-222-1SC * 7007-222-1 Curved blades, fine tips, 9" (23 cm)
7007-222-2SC Curved blades, tenotomy tips, 9" (23 cm)
* 7007-223-2SC Straight blades, tenotomy tips, 10 1/4" (26 cm)
7007-224SC * 7007-224 Curved blades, 10 1/4" (26 cm)
7007-224-1SC Curved blades, fine tips, 10 1/4" (26 cm)
7007-224-2SC Curved blades, tenotomy tips, 10 1/4" (26 cm)
7007-226SC Curved blades, 12" (30.5 cm)
7007-226-1SC Curved blades, fine tips, 12" (30.5 cm)
n Metzenbaum Scissors, Ring Handle
7007-218SC
Curved Blades
Straight Blades
Curved Blades Fine Tips
Straight Blades Fine Tips
Curved Blades Tenotomy Tips
Straight Blades Tenotomy Tips
Curved Blades 2.5 mm Tips
7007-84
Instrument blades are shown approximate size
Instrument blades are shown approximate size
Instrument blades are shown approximate size
Instrument blades are shown approximate size
Instrument blades are shown approximate size
Instrument blades are shown approximate size
7007-218SC
7007-217SC
7007-218-1SC
7007-217-1SC
7007-218-3SC
7007-217-2SC
Cat. No. Description7007-84 Extra light, 7" (18 cm)
n Metzenbaum Scissors, Ring Handle, Curved Blades
Corresponding SCANLAN® Super Cut™ and Ultra Sharp® scissors patterns incorporate the same blade design and unique cutting edge.Super Cut™ scissors (indicated with an ‘SC’) have a black platinum handle finish while ULTRA SHARP® scissors have a light gray, satin handle finish.
Corresponding SCANLAN® Super Cut™ and Ultra Sharp® scissors patterns incorporate the same blade design and unique cutting edge.Super Cut™ scissors (indicated with an ‘SC’) have a black platinum handle finish while ULTRA SHARP® scissors have a light gray, satin handle finish.
Ring Handle n Metzenbaum
SC
ISS
OR
S
SC
ISS
OR
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
scis
sors
/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
scis
sors
/
5.335.32
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Ring Handle n MetzenbaumRing Handle n Metzenbaum
Super Cut™ Cat. No. Description
* 7007-302SC Curved blades, 6 1/2" (16.5 cm)
* 7007-304SC Straight blades, 7 3/4" (19.5 cm)
7007-306SC Curved blades, 7 3/4" (19.5 cm)
7007-304SC
n Face-Lift Scissors, Ring Handle, Semi-Sharp Outer Blade
Corresponding SCANLAN® Super Cut™ and Ultra Sharp® scissors patterns incorporate the same blade design and unique cutting edge.Super Cut™ scissors (indicated with an ‘SC’) have a black platinum handle finish while ULTRA SHARP® scissors have a light gray, satin handle finish.
n Mayo Scissors, Ring Handle, Full Curved Blades
Full Curved Round Blades
1001-21
Cat. No. Description* 1001-21 Round blades, 7 3/4" (19.5 cm)
* 1001-23 Round blades, 10" (25.4 cm)
Straight Blades Curved Blades
Super Cut™ Cat. No.
Ultra Sharp®
Cat. No. Description7007-204SC * 7007-204 Straight round blades, 6 3/4" (17 cm)
7007-205SC Straight round blades, 7 1/2" (19 cm)
7007-206SC 7007-206 Curved round blades, 6 3/4" (17 cm)
7007-207SC Curved round blades, 7 1/2" (19 cm)
7007-205SC
n Mayo Scissors, Ring Handle
Straight Blades, Sharp Tips
Curved Blades, Sharp Tips
Corresponding SCANLAN® Super Cut™ and Ultra Sharp® scissors patterns incorporate the same blade design and unique cutting edge.Super Cut™ scissors (indicated with an ‘SC’) have a black platinum handle finish while ULTRA SHARP® scissors have a light gray, satin handle finish.
SC
ISS
OR
S
SC
ISS
OR
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
scis
sors
/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
scis
sors
/
5.355.34
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Ring Handle n Mayo / Face-LiftRing Handle n Mayo
n Flemma Mitral Repair Scissors, Ring Handle, Curved Blades, Flat Tips
n Venous Valve Scissors (In Situ), Ring Handle, Straight Blades, Blunt Tips
Curved Blades
Straight Blades Blunt Tips
8008-15
9009-128
Cat. No. Description* 8008-15 Round blades, 12" (30.5 cm)
Cat. No. Description* 9009-126 4" (10 cm)
* 9009-128 9" (23 cm)
n Thompson Valve Scissors, Ring Handle, Full Curved (One Serrated) Blades
8008-14
Cat. No. Description8008-12 Round blades, 8 1/2" (21.5 cm)
8008-14 Round blades, 10" (25.4 cm)
Full Curved Round Blades
Ring Handle n Flemma Mitral / Venous Valve (In Situ)
SC
ISS
OR
S
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
scis
sors
/
5.36
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Ring Handle n Thompson Valve
SP
EC
IALT
Yht
tp://
ww
w.s
canl
anin
tern
atio
nal.c
om/in
stru
men
tatio
n/
TEMPORARY OCCLUSION CLIPS / FORCEPS Reliance Bulldog Clamps .................................................. 6.1 Heifetz™ Clips .................................................................... 6.3 Yasargil-Type Clips ............................................................ 6.4
SUNDT™ GRADUATED SUCTION SYSTEM ........................... 6.6
SCANLAN® CALIPER / KNIFE BLADE TOOL ........................ 6.8
SCANLAN® MEMORY INSTRUMENTS ................................... 6.9
VASCULAR DILATORS SCANLAN® MEMORY Vascular Dilators ......................... 6.10 Vascular Dilators............................................................... 6.11
DISSECTORS / PLAQUE REMOVERS .................................. 6.12
STERNS CHEST TUBE PASSER .......................................... 6.14
PHLEBECTOMY HOOKS ....................................................... 6.14
VALVULOTOMES ................................................................... 6.15
AORTA / VEIN PUNCHES (Re-useable) ................................ 6.15
BIPOLAR FORCEPS Advantage™ Bipolar Forceps ............................................6.16
HAND-HELD RETRACTORS Pediatric .......................................................................... 6.17 Valve ................................................................................ 6.17 Hooks .............................................................................. 6.17
SELF-RETAINING RETRACTORS Pediatric .......................................................................... 6.18
PUSKAS™ CORONARY INSTRUMENT SETS ....................... 6.20 Basic Set ......................................................................... 6.21 Supplemental Set ............................................................ 6.22 IMA Dissection Set .......................................................... 6.24
ENDARTERECTOMY SETS SCANLAN® Loftus® Carotid Endarterectomy Set ............ 6.26 Ochsner Total Endarterectomy Set ................................. 6.28
SAMSON PHLEBECTOMY SET ............................................ 6.30
Use your Smart Phone and QR Reader software to photograph the code below which will take
you to this section on the Scanlan Website
SP
EC
IALT
Yht
tp://
ww
w.s
canl
anin
tern
atio
nal.c
om/in
stru
men
tatio
n/
1
2
3
4
5
6
7
8
9
10
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
INCHES CM
SP
EC
IALT
Y
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
6.1
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Cat. No. DescriptionNEW ** 3795-50 25 mm straight DeBakey Jaws, 2″ (5 cm)
NEW ** 3795-51 25 mm curved DeBakey Jaws, 2″ (5 cm)
NEW ** 3795-54 7 mm straight DeBakey Jaws, 1 1/4″ (3.2 cm)
NEW ** 9999-50 Starter Pack includes 4 Bulldogs (3795-50) and 1 sterilization tray (2133-03)
n Reliance Bulldog Clamp
Instrument jaws are shownapproximate size
3795-51
3795-54
3795-50
Reliance Bulldog Clamps
Cat. No. Description ShaftWorking Length
Total Length
NEW 9009-395 Straight , with ratchet 7 mm 13 3/4″ (35 cm) 17 1/3″ (44 cm)
n Reliance Bulldog Applier / Introducer
9009-395
Instrument jaws are shownapproximate size
n SCANLAN® Heifetz™ Temporary Occlusion Clip Appliers
n SCANLAN® Heifetz™ Temporary Occlusion Clips, 8 mm jaw length, 1.75 mm jaw width
n SCANLAN® Heifetz™ Temporary Occlusion Clips, 12 mm jaw length, 2.25 mm jaw width
Cat. No. Description3795-01 Applier, straight, 7 1/4″ (18.5 cm)
(for all SCANLAN® Heifetz™ clips)
3795-01A Applier, angled, 7 1/4″ (18.5 cm) (for all SCANLAN® Heifetz™ clips)
Cat. No. Description** 3795-04 Straight, light pressure, black
** 3795-14 Straight, firm pressure, gold
** 3795-06 Angled on edge, light pressure, black
** 3795-16 Angled on edge, firm pressure, gold
** 3795-08 Curved, light pressure, black
** 3795-18 Curved, firm pressure, gold
Cat. No. Description** 3795-20 Straight, light pressure, black
** 3795-22 Curved, light pressure, black
** 3795-24 Straight, firm pressure, gold
** 3795-28 Curved, firm pressure, gold
8 mm Straight 3795-04
12 mm Straight 3795-24
12 mm Curved 3795-28
8 mm Angled 3795-06
8 mm Curved 3795-08
Occlusion tips are shown approximate size
Occlusion tips are shown approximate size
All SCANLAN® Heifetz™ Temporary Occlusion Clips are re-usable and steam, flash (immediate use), ETO and plasma sterilization compatible.
3795-01
SP
EC
IALT
Y
SP
EC
IALT
Y
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
6.36.2
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
SCANLAN® Heifetz™ ClipsReliance Bulldog Applier / Introducer
n Yasargil-type Applying Forceps
n SCANLAN® Yasargil-type Temporary Occlusion Clips
Cat. No. Description* 3786-40 8 1/2" (21.5 cm)
(For temporary occlusion clips 3786-30, -31, and -32)
Cat. No. Description
* 3786-30 Straight, 4 mm
* 3786-31 Straight, 6 mm
* 3786-32 Curved, 7 mm
All Yasargil-type Temporary Occlusion Clips are re-usable and steam, flash (immediate use), ETO and plasma sterilization compatible.
3786-40
4 mm Straight 3786-30
6 mm Straight 3786-31
7 mm Curved 3786-32
n Yasargil-type Applying Forceps
n SCANLAN® Yasargil-type Temporary Occlusion Clips
Cat. No. Description3786-28 7 1/8″ (18.1 cm)
(For temporary occlusion clips 3786-22, -23, -24, and -25)
Cat. No. Description
** 3786-21 Straight, 7 mm
** 3786-22 Straight, 9 mm
** 3786-23 Angled, 9 mm
** 3786-24 Slightly curved, 9 mm
** 3786-25 Strongly curved, 9 mm
All Yasargil-type Temporary Occlusion Clips are re-usable and steam, flash (immediate use), ETO and plasma sterilization compatible.
3786-28
9 mm Straight 3786-22
9 mm Angled 3786-23
9 mm Slightly Curved
3786-24
9 mm Strongly Curved
3786-25
Occlusion tips are shown approximate size
7 mm Straight 3786-21
SP
EC
IALT
Y
SP
EC
IALT
Y
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
6.56.4
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Yasargil-Type Clips Yasargil-Type Clips
3 Fr. 4 Fr. 5 Fr. 6 Fr. 7 Fr. 9 Fr. 11 Fr.
9009-930
n SUNDT™ Graduated Suction Systems (Sets)
n SUNDT™ Graduated Suction Parts and Tray
n 4 1/2″ (11.5 cm) Tips for SUNDT™ Graduated Suction Systems
n 5 1/4″ (13.5 cm) Tips for SUNDT™ Graduated Suction Systems
n 7 7/8″ (19.8 cm) Tips for SUNDT™ Graduated Suction Systems
Cat. No. Description9009-940 4 1/2" / 11.5 cm rotatable suction tip set
9009-960 5 1/4" / 13.5 cm rotatable suction tip set
* 9009-980 7 7/8" / 19.8 cm rotatable suction tip set
Cat. No. Description* 9009-928 Brush Set, pack of ten (for 9009-940 and 9009-960)
* 9009-929 Brush Set, pack of ten (for 9009-980)
* 9009-930 Universal Suction Handle, 3″ (7.5 cm), fits all tip lengths and French sizes
** 9009-934 Sundt™ Sterilization / Storage Tray, silicone mat, 6″ x 10″ x 1.5″ (15.2 x 25.4 x 3.8 cm), (fits all tips / lengths and handle)
Cat. No. Description9009-941 3 French
9009-942 4 French
9009-943 5 French
9009-944 6 French
9009-945 7 French
9009-947 9 French
9009-949 11 French
Cat. No. Description9009-961 3 French
9009-962 4 French
9009-963 5 French
9009-964 6 French
9009-965 7 French
9009-967 9 French
9009-969 11 French
Cat. No. Description* 9009-981 3 French
* 9009-982 4 French
* 9009-983 5 French
* 9009-984 6 French
* 9009-985 7 French
9009-987 9 French
* 9009-989 11 French
Rotatable
Rotatable
Rotatable
Each set has seven suction tips, diameters:
And includes a universal suction handle (3" / 7.5 cm) and sterilization / storage case
Silicone mat in tray is latex-safe
SP
EC
IALT
Y
SP
EC
IALT
Y
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
6.76.6
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
SUNDT™ Graduated Suction Systems SUNDT™ Graduated Suction Systems
n SCANLAN® Caliper
Cat. No. Description8008-400 Scale with black matte finish, ring handle, 11″ (28 cm)
Knife Blade Tool
Caliper sideview shown approximate size
See Side ViewBelow
8008-400
Instrument jaws are shownapproximate size
n SCANLAN® MEMORY Instruments
Instrument tips are shownapproximate size
Cat. No. Description** 8008-410 Knife Handle, Nitinol shaft, stainless steel flat handle,
fits #15 and #11 blades, 9 1/2″ (24 cm)
** 8008-420 Mirror Instrument, Nitinol shaft, stainless steel round handle, 1.5 X magnification, 2 pieces (handle, mirror), 9 7/8″ (25 cm)
** 8008-420-4 Replacement mirror for MEMORY Mirror Instrument (8008-420), 1.5 X magnification
** 8008-430 Nerve Hook, Nitinol shaft and angled tapered tip, stainless steel round handle 10″ (25.4 cm)
** 8008-432 Nerve Hook, Nitinol shaft and angled flat tip, stainless steel round handle 10″ (25.4 cm)
8008-432 8008-420-48008-430
Note: The detachable mirror for the SCANLAN® MEMORY Mirror Instrument is guaranteed to be free from defects in materials and workmanship for 90-days. It is not covered under the SCANLAN® 10-Year Warranty.
Nitinol is a metal alloy which is flexible and has shape memory. This means that the nitinol portion of the instrument can be bent by the user to a desired curved shape for use. The instrument will return back to its original shape when exposed to a temperature of 60°C - 90°C (140° - 194°F). Steam autoclaving exceeds this temperature and is the recommended method to return the nitinol portion of the instrument back to the original shape.
n SCANLAN® Knife Bending and Blade Tool
Cat. No. Description8008-405 DIAMOND DUST™ jaws, open spring handle, 7″ (18 cm)
(for use with SCANLAN® MEMORY Knife Handle 8008-410)
SP
EC
IALT
Y
SP
EC
IALT
Y
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
6.96.8
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
8008-405
Caliper
8008-430
8008-410
8008-420
MEMORY Instruments
n SCANLAN® MEMORY Garrett Vascular Dilators, 5 1/2" (14 cm)
n SCANLAN® MEMORY Garrett Vascular Dilators, 8 1/4" (21 cm)
n SCANLAN® MEMORY Graduated Vascular Dilators, 8 1/4" (21 cm)
Cat. No. DescriptionNEW **8008-448A 0.5 mm
NEW **8008-448B 1.25 mm
NEW **8008-448C 1.75 mm
NEW **8008-452 1 mm
NEW **8008-454 1.5 mm
NEW **8008-456 2 mm
NEW **8008-458 2.5 mm
NEW **8008-460 3 mm
NEW **8008-462 3.5 mm
NEW **8008-464 4 mm
NEW **8008-466 4.5 mm
NEW **8008-468 5 mm
Cat. No. DescriptionNEW **8008-493 1/1.5 mm
NEW **8008-494 1.5/2 mm
NEW **8008-495 2/2.5 mm
Cat. No. DescriptionNEW **8008-449A 0.5 mm
NEW **8008-449B 1.25 mm
NEW **8008-449C 1.75 mm
NEW **8008-472 1 mm
NEW **8008-474 1.5 mm
NEW **8008-476 2 mm
NEW **8008-478 2.5 mm
NEW **8008-480 3 mm
NEW **8008-482 3.5 mm
NEW **8008-484 4 mm
NEW **8008-486 4.5 mm
NEW **8008-488 5 mm
9009-70 (set of nine)
n Garrett Vascular Dilators, 5 1/2" (14 cm) n Garrett Vascular Dilators, 8 1/4" (21 cm)
n Graduated Vascular Dilators, 8 1/4" (21 cm)
Cat. No. Description* 9009-48 Set of three
(one each of #9009-48A, -48B, -48C)
* 9009-48A 0.5 mm
9009-48B 1.25 mm
* 9009-48C 1.75 mm
* 9009-50 Complete set of nine: (one each of #9009-52 -54, -56, -58, -60, -62, -64, -66, -68)
9009-52 1 mm
9009-54 1.5 mm
9009-56 2 mm
9009-58 2.5 mm
* 9009-60 3 mm
* 9009-62 3.5 mm
* 9009-64 4 mm
* 9009-66 4.5 mm
* 9009-68 5 mm
Cat. No. Description* 9009-92 Set of three
(one each of #9009-93, -94, -95)
* 9009-93 1/1.5 mm
* 9009-94 1.5/2 mm
* 9009-95 2/2.5 mm
Cat. No. Description* 9009-49 Set of three
(one each of #9009-49A, -49B, -49C)
* 9009-49A 0.5 mm
* 9009-49B 1.25 mm
* 9009-49C 1.75 mm
* 9009-70 Complete set of nine: (one each of #9009-72, -74, -76, -78, -80, -82, -84, -86, -88)
9009-72 1 mm
9009-74 1.5 mm
9009-76 2 mm
* 9009-78 2.5 mm
* 9009-80 3 mm
* 9009-82 3.5 mm
* 9009-84 4 mm
* 9009-86 4.5 mm
* 9009-88 5 mm
Nitinol is a metal alloy which is flexible and has shape memory. This means that the nitinol portion of the instrument can be bent by the user to a desired curved shape for use. The instrument will return back to its original shape when exposed to a temperature of 60°C - 90°C (140° - 194°F). Steam autoclaving exceeds this temperature and is the recommended method to return the nitinol portion of the instrument back to the original shape.
8008-478
Instrument tips are shown approximate size
SP
EC
IALT
Y
SP
EC
IALT
Y
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
6.116.10
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Vascular DilatorsVascular Dilators
n Ochsner Double-Ended Dissectors
n Ochsner Plaque Remover, Ring Handle
n Ochsner Angled Delicate Plane Finder Dissector, Angled with Ball
Cat. No. Description9009-144 1 mm and 2 mm, 7 1/8″ (18.1 cm)
9009-146 3 mm and 4 mm, 7 1/8″ (18.1 cm)
Cat. No. Description9009-150 Curved fine tips, 6 1/8" (15.5 cm)
* 9009-152 Straight fine tips, 6 1/8" (15.5 cm)
Cat. No. Description9009-142 7 1/2" (19 cm)
9009-146
9009-150
9009-142
n Krayenbuhl Micro Nerve and Vessel Hooks
n Krayenbuhl Micro Nerve and Vessel Hooks
Cat. No. Description3784-32 Small, 7 1/4" (18.5 cm)
* 3784-33 Large, 7 1/4" (18.5 cm)
Cat. No. Description
* 3784-30 Pointed small, 7 1/4" (18.5 cm)
* 3784-31 Pointed large, 7 1/4" (18.5 cm)
3784-32
3784-31
SP
EC
IALT
Y
SP
EC
IALT
Y
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
6.136.12
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Dissectors/Plaque Removers Micro Hooks / Probes
n SCANLAN® Stern™ Chest Tube Passers
n SCANLAN® Samson™ Phlebectomy Hooks, Black Platinum Handle
Cat. No. Description4004-185 Without ratchet, 9 3/4″ (24.8 cm)
4004-186 With ratchet, 9 3/4" (24.8 cm)
4004-189 Without ratchet, 14″ (35.6 cm)
Cat. No. Description8008-230 Right short, 4 1/4" (11 cm)
8008-232 Left short, 4 1/4" (11 cm)
8008-236 Right long, 5 1/2" (14 cm)
4004-185
Phlebectomy Hooks
Designed in cooperation with Russell H. Samson, M.D.
n In Situ Valvulotomes, 0.8 mm Cutting Edge (Retrograde)
n SCANLAN® Aorta/Vein Punches
9009-123
1001-05
1001-07
Cat. No. Description
* 9009-120 Set of three (one each of 9009-121, -122, and -123)
* 9009-121 9" (23 cm)
9009-122 10" (25.4 cm)
9009-123 12″ (30.5 cm)
Cat. No. Description
* 1001-04 4.0 mm, with sterilizing box & tray
* 1001-05 4.5 mm, with sterilizing box & tray
* 1001-06 5.5 mm, with sterilizing box & tray
* 1001-07 Sterilizing box & tray
(Single-Use Aorta / Vein Punches can be found on page 10.1)
SP
EC
IALT
Y
SP
EC
IALT
Y
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
6.156.14
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Stern™ Chest Tube Passer Valvulotomes / Aorta/Vein Punch
8008-04
n Ionescu Valve Retractor Cat. No. Description8008-02 Double-Ended Leaflet Valve Retractor, small 8 1/4″ (21 cm)
8008-04 Double-Ended Valve Retractor, medium, 7 1/8" (18.1 cm)
* 8008-06 Double-Ended Valve Retractor, large, 9" (23 cm)
8008-02 8008-06
8008-10
4004-401N
4004-405N
4004-412N
6.0 mm 7.5 mm 1.2 mm 1.7 mm 2.2 mm 2.5 mm
n Bryant Mitral Hooks
n SCANLAN® Advantage™ Dissecting Bipolar Bayonet-style Forceps
n SCANLAN® Advantage™ Badie™ Suction Bipolar Bayonet-style Forceps
n SCANLAN® Advantage™ Irrigating Bipolar Bayonet-style Forceps
Cat. No. Description
* 8008-10 Two semi-sharp points, 10 3/4" (27.3 cm)
* 8008-11 One semi-sharp point, 10 3/4" (27.3 cm)
Cat. No. Description
* 4004-401N 1 mm tips, 7 3/8" (18.7 cm)
* 4004-402N 2 mm tips, 7 3/8" (18.7 cm)
Cat. No. Description
* 4004-405N 1.4 mm tips, 8 1/4" (21 cm)
* 4004-406N 2.0 mm tips, 8 1/4" (21 cm)
* 4004-407N 1.4 mm tips, 9 1/2" (24 cm)
* 4004-408N 2.0 mm tips, 9 1/2" (24 cm)
Cat. No. Description
* 4004-409N 0.5 mm tips, 6 3/4" (17 cm)
* 4004-410N 1.0 mm tips, 6 3/4" (17 cm)
* 4004-411N 0.5 mm tips, 7 3/8" (18.7 cm)
* 4004-412N 1.0 mm tips, 7 3/8" (18.7 cm)
* 4004-415N 0.5 mm tips, 9" (23 cm)
* 4004-416N 1.0 mm tips, 9" (23 cm)
Cat. No. Description
* 4004-400N Bipolar Cable, 2-prong, American fitting, 10 ft. (3.05 m)
4004-134N Suction Tubing, 4 ft. (1.05 m) 1 per sterile pack, 5 packs per box
* 4004-126N Suction Cleaning Stylet
* 4004-127N Irrigating Cleaning Stylet
** 4004-130N SCANLAN® Advantage™ Sterilization Tray
Hand-Held Retractors n Hooks
Hand-Held Retractors n Valve
SCANLAN® Advantage™ Bipolar Forceps n Suction
SCANLAN® Advantage™ Bipolar Forceps n Irrigating
Accessories
n Cochran Pediatric Retractors
Cat. No. Description Cat. No. Description1001-10 3/4″ (19 mm) wide, 6 1/2″ (16.5 cm) long 1001-13 3/8" (9.5 mm) wide, 6 1/2" (16.5 cm) long
1001-11 5/8" (15.6 mm) wide, 6 1/2" (16.5 cm) long 1001-14 1/4″ (6.4 mm) wide, 6 1/2″ (16.5 cm) long
1001-12 1/2″ (12.7 mm) wide, 6 1/2″ (16.5 cm) long
1001-12
SP
EC
IALT
Y
SP
EC
IALT
Y
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
6.176.16
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
SCANLAN® Advantage™ Bipolar Forceps n Dissecting Hand-Held Retractors n Pediatric
n Pediatric Retractor
n Pediatric Finochietto Retractors
Cat. No. Description
* 8008-43 Titanium Retractor with Interchangeable Blades
Spread Arms Blades52 mm 40 mm 1 pair; 10 mm long x 15 mm deep
1 pair; 20 mm long x 15 mm deep
Cat. No. Description
* 8008-41 Finochietto Neonate Sternal Retractor, aluminum
Spread Arms Blades36 mm 37 mm 7 mm long x 7 mm deep
* 8008-42 Finochietto Neonate Sternal Retractor, titanium
Spread Arms Blades36 mm 37 mm 7 mm long x 7 mm deep
* 8008-45 Bailey Finochietto Sternal Retractor, titanium
Spread Arms Blades80 mm 57 mm 20 mm long x 20 mm deep
* 8008-47 Bailey Finochietto Retractor, aluminum
80 mm 56 mm 15 mm long x 15 mm deep
8008-43
80 mm spread, 56 mm arms
80 mm spread, 57 mm arms8008-47
8008-45
20 mm x 15 mmBlades
10 mm x 15 mmBlades
52 mm Spread
40 mm Arms
SP
EC
IALT
Y
SP
EC
IALT
Y
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
6.196.18
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Self-Retaining Retractors n Pediatric Self-Retaining Retractors n Pediatric
3003-770
3003-381
7007-521
3003-810
3003-390
3003-511
n SCANLAN® Puskas™ Titanium Jacobson Micro Needle Holders, Round Handle, Extended Knurling, DIAMOND DUST™ Jaws
n SCANLAN® Puskas™ Black Knight™ Lillehei-Potts Scissors, Black Platinum Ring Handle, Curved SUPER CUT™ Blades
n SCANLAN® Puskas™ Premier™ Jacobson Micro Scissors, Flat Handle, Bayonet Style
n Instrument Sterilization Tray & Accessories
n SCANLAN® LEGACY Puskas™ Titanium Micro Forceps, Never Shear™ Dual Guide™, DIAMOND DUST™ Platform Tips, 1 x 2 Micro Teeth, Round Handle
SCANLAN® Puskas™ Coronary Instruments – Basic Set – Catalog Number 9999-100Total set includes the following:
Cat. No. Description3003-381 With ratchet, 8 1/4″ (21 cm)
3003-390 With ratchet, 9″ (23 cm)
Cat. No. Description7007-262SC Sharp Tips, 6 1/2" (16.5 cm)
Cat. No. Description7007-511 45° angled nano blades, 8″ (20 cm)
7007-521 Angled left, V-neck, 125° angled nano blades, 8″ (20 cm)
Cat. No. Description**2140-03 Aluminum sterilization tray, detachable lid, silver-gray color, 10″ x 15″ x 1.5″
(25.4 x 38 x 3.8 cm) Instrument capacity: 10-12
Cat. No. Description3003-770 Puskas™ 0.5 mm straight tips, 7 1/8″ (18.1 cm)
3003-778 Puskas™ 1.0 mm straight tips, 8 1/4″ (21 cm)
3003-810 Puskas™ bayonet, 0.5 mm straight tips, 8 3/4″ (22 cm) (Note: Each Basic Set has 2 of the 3003-810 forceps)
DUAL GUIDE™ Patent No. 8,147,152
Never Shear™ Dual Guide™
Patent No. 8,147,512
Developed in cooperation with John D. Puskas, MD
SP
EC
IALT
Y
SP
EC
IALT
Y
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
6.216.20
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
SCANLAN® Puskas™ Coronary Instruments n Basic Set SCANLAN® Puskas™ Coronary Instruments n Basic Set
3003-774
3003-776
7007-514
3003-775
3003-391
3003-522
n SCANLAN® Puskas™ Titanium Jacobson Micro Needle Holders, Extended Knurling, DIAMOND DUST™ Jaws, Round Handle
n SCANLAN® Puskas™ Premier™ Jacobson Micro Scissors, Flat Handle, Bayonet Style
n Instrument Sterilization Tray & Accessories
n SCANLAN® LEGACY Puskas™ Titanium Micro Forceps, Never Shear™ Dual Guide™, DIAMOND DUST™ Platform Tips, 1 x 2 Micro Teeth, Round Handle
SCANLAN® Puskas™ Coronary Instruments – Supplemental Set – Catalog Number 9999-101Total set includes the following:
Cat. No. Description3003-391 With ratchet, 9 1/2″ (24 cm)
Cat. No. Description7007-514 Reversed handle, angled left, 45° angled nano blades, 8" (20 cm)
7007-522 Angled right, V-neck, 125° angled nano blades, 8″ (20 cm)
Cat. No. Description**2138-03 Aluminum sterilization tray, detachable lid, silver-gray color, 10″ x 10″ x 1.5″
(25.4 x 25.4 x 3.8 cm) Instrument capacity: 8-10
Cat. No. Description3003-774 Puskas™ 0.5 mm straight tips, 8 1/4″ (21 cm)
3003-775 Puskas™ 0.5 mm curved tips, 8 1/4″ (21 cm)
3003-776 Puskas™ 0.5 mm angled tips, 8 1/4″ (21 cm)
Developed in cooperation with John D. Puskas, MD
SP
EC
IALT
Y
SP
EC
IALT
Y
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
6.236.22
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
SCANLAN® Puskas™ Coronary Instruments n Supplemental Set SCANLAN® Puskas™ Coronary Instruments n Supplemental Set
7007-506
IMA Glide™
n SCANLAN® Puskas™ Premier™ Jacobson Micro Scissors, Flat Handle, IMA Glide™, 45° Angled Up, Flat Handle
n Instrument Sterilization Tray & Accessories
n SCANLAN® Puskas™ Black Knight™ Lillehei-Potts Scissors, Black Platinum Ring Handle, Curved SUPER CUT™ Blades
SCANLAN® Puskas™ Coronary Instruments – IMA Dissection Set - Catalog Number 9999-102Total set includes the following:
Cat. No. Description7007-506 LIMA, left 90° angled fine blades, 8" (20 cm)
7007-507 RIMA, right 90° angled fine blades, 8" (20 cm)
Cat. No. Description**2138-03 Aluminum sterilization tray, detachable lid, silver-gray color, 10″ x 10″ x 1.5″
(25.4 x 25.4 x 3.8 cm) Instrument capacity: 8-10
Cat. No. Description7007-262SC Sharp tips, 6 1/2" (16.5 cm)
Developed in cooperation with John D. Puskas, MD
SP
EC
IALT
Y
SP
EC
IALT
Y
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
6.256.24
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
SCANLAN® Puskas™ Coronary Instruments n IMA Dissection Set SCANLAN® Puskas™ Coronary Instruments n IMA Dissection Set
n SUPER CUT™ Scissors
n Storage/Sterilization Tray
n Vascu-Statt® Applier for Bulldog Clamps
n Single-Use Products (Set includes one sample of the following.)
n SCANLAN® Loftus™ Titanium Bulldog Shunt Clamps (Set includes one sample of the following. Please indicate choice when placing order.)
n Forceps
n Needle Holder
n Clamps
SCANLAN® Loftus™ Carotid Endarterectomy Set – *Cat. No. 9999-181Total set includes the following:
Cat. No. Description7007-211SC Stevens tenotomy scissors, ring handle, curved blades, 7" (18 cm)
7007-218-3SC Metzenbaum scissors, ring handle, curved blades, 2.5 mm blunt tips, 7" (18 cm)
7007-254SC Diethrich-Potts scissors, ring handle, angled blades, 7″ (18 cm), 60° angled fine blades
7007-320SC DeBakey scissors, ring handle, 45° angled blades, blunt tips, 6 1/4" (16 cm)
Cat. No. Description** 2081-23 Plastic sterilization tray, plastic clasps, with additional 1/2 tray insert and extra silicone mat
15″ x 10″ x 1.5″ (38 x 25.4 cm x 3.8 cm)
** 2142-03 Aluminum sterilization tray, detachable lid, silver-gray color, silicone insert across full width of base, additional tray insert, 10″ x 15″ x 2.6″ (25.4 x 38 x 6.6 cm)
Cat. No. Description1001-506 Straight, 8 1/2″ (21.5 cm)
Cat. No. Description1001-76 SURG-I-LOOP® Silicone Loops, red Maxi
1001-550 VASCU-STATT® Plus, Midi, straight
Cat. No. Description3003-04 DeBakey dissecting forceps, straight tips, flat handle, 2 mm tips, 7 3/4″ (19.5 cm)
3003-05 DeBakey dissecting forceps, straight tips, flat handle, 1 mm tips, 7 3/4″ (19.5 cm)
3003-158-8 Micro forceps, DIAMOND DUST™ platform tips, round handle, straight tips, 8 1/4″ (21 cm)
3003-720 Dennis micro forceps, 1 mm straight DIAMOND DUST™ ring tips, round handle, counterbalanced 7″ (18 cm)
Cat. No. Description3003-234-1 Micro needle holders, DIAMOND DUST™ jaws, flat handle fine jaws, with ratchet, 8 1/2″ (21.5 cm)
straight jaws - streamline box lock, recommended suture size: 5-0 and smaller
Cat. No. Description2002-235 SCANLAN® baby vascular clamps, Cooley jaws, 45° angled jaws, 5 3/4″ (14.6 cm)
3003-614 Micro clamps, angled DeBakey jaws, 60° angled jaws, 23 mm jaw length, 4 1/8″ (10.5 cm)
4377-08 DeBakey Cooley forceps, Carmalt Jaws with cross hatch tips, right angled jaws, 7 1/2" (19 cm)
9009-148 Ochsner forceps, 90° angled very fine serrated jaws, 4 1/2″ (11.5 cm)
SCANLAN® Loftus™ Carotid Endarterectomy Set developed in cooperation with Christopher M. Loftus, M.D.
Cat. No. Description
* 4385-40 10° angled, 10 Fr., 3 3/4" (9.5 cm) 10 Fr.
* 4385-42 25° angled, 10 Fr., 3 3/4" (9.5 cm) 10 Fr.
* 4385-44 45° angled, 10 Fr., 3 3/4" (9.5 cm) 10 Fr.
* 4385-46 60° angled, 10 Fr., 3 3/4" (9.5 cm) 10 Fr.
* 4384-40 10° angled, 12 Fr., 3 3/4" (9.5 cm) 12 Fr.
* 4384-42 25° angled, 12 Fr., 3 3/4" (9.5 cm) 12 Fr.
* 4384-44 45° angled, 12 Fr., 3 3/4" (9.5 cm) 12 Fr.
* 4384-46 60° angled, 12 Fr., 3 3/4" (9.5 cm) 12 Fr.
* 4383-40 10° angled, 14 Fr., 3 3/4" (9.5 cm) 14 Fr.
* 4383-42 25° angled, 14 Fr., 3 3/4" (9.5 cm) 14 Fr.
* 4383-44 45° angled, 14 Fr., 3 3/4" (9.5 cm) 14 Fr.
* 4383-46 60° angled, 14 Fr., 3 3/4" (9.5 cm) 14 Fr.
n Dissectors (Set includes on each of the following.)
Cat. No. Description* 9009-144 1 mm and 2 mm, 7 1/8" (18.1 cm)
* 9009-146 3 mm and 4 mm, 7 1/8" (18.1 cm)
SP
EC
IALT
Y
SP
EC
IALT
Y
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
6.276.26
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Endarterectomy Sets n SCANLAN® Loftus™ Endarterectomy Sets n SCANLAN® Loftus™
n Forceps
n Dissectors
n Plaque Remover
n Storage / Sterilization Tray
Ochsner Total Endarterectomy Set – *Cat. No. 9999-192
Cat. No. Description4004-37 DeBakey needle pulling tissue forceps, 2 mm straight Carbon-Inlay tips, flat handle, 7 1/2″ (19 cm)
4004-224 Dennis micro forceps, DIAMOND DUST™ ring tips, round handle, counterbalanced, 1 mm straight tips, 8 1/4″ (21 cm)
9009-148 Ochsner forceps, 90° angled very fine serrated jaws, 4 1/2″ (11.5 cm)
Cat. No. Description9009-142 Ochsner angled delicate plane finder dissector, angled with ball, 7 1/2" (19 cm)
9009-144 Ochsner Double-Ended dissectors, 1 mm and 2 mm, 7 1/8″ (18.1 cm)
9009-146 Ochsner Double-Ended dissectors, 3 mm and 4 mm, 7 1/8″ (18.1 cm)
Cat. No. Description9009-150 Ochsner Plaque Remover, ring handle, curved fine tips, 6 1/8" (15.5 cm)
9009-152 Ochsner Plaque Remover, ring handle, straight fine tips, 6 1/8" (15.5 cm)
Cat. No. Description8008-62 Plastic sterilization tray, silicone mat 12″ x 9″ x 0.7″ (30.5 x 23 cm x 1.8 cm) Instrument capacity: 8-12
*
*
SCANLAN® Ochsner Endarterectomy Set developed in cooperation with John L. Ochsner, M.D.
SP
EC
IALT
Y
SP
EC
IALT
Y
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
6.296.28
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Endarterectomy Sets n SCANLAN® Ochsner Endarterectomy Sets n SCANLAN® Ochsner
Note: Instruments inside of the tray are part of the set, the products outside of the tray are optional.
SCANLAN® Samson™ Phlebectomy Sets designed in cooperation with Russell H. Samson, M.D.
n SCANLAN® Samson™ Phlebectomy Hooks
n Vascular Haemostat, Serrated Jaws
n Instrument Sterilization Tray and Accessories
n Optional Single-Use Products
n Optional Instruments
n Delicate Mosquito Forceps
SCANLAN® Samson™ Phlebectomy Set – Catalog Number 9999-150Total set includes the following:
SCANLAN® Samson™ Phlebectomy Set – Catalog Number 9999-151Includes all 6 instruments listed above for the 9999-150 Set with Metal Sterilization Tray below instead of the Plastic Sterilization Tray
Cat. No. Description8008-230 Black platinum handle, right short, 4 1/4" (11 cm)
8008-236 Black platinum handle, right long, 5 1/2" (14 cm)
Cat. No. Description5005-82 Curved jaws with sharp grasping serrations, 5" (12.7 cm)
Cat. No. Description**2081-11 Plastic sterilization tray, silicone mat 10″ x 6″ x 0.7″ (25.4 cm x 15 cm x 1.8 cm)
Cat. No. Description1001-710 SCANLAN® surgical skin marker, gentain violet, regular tip
Cat. No. Description8008-232 SCANLAN® Samson™ phlebectomy hooks, black platinum handle, left short, 4 1/4" (11 cm)
5005-80 Phlebectomy haemostat, 90° angled very fine jaws with sharp grasping serrations, 4 1/2″ (11.5 cm)
Cat. No. Description**2138-03 Aluminum sterilization tray, detachable lid, silver-gray color, 10″ x 10″ x 1.5″
(25.4 x 25.4 x 3.8 cm) Instrument capacity: 8-10
Cat. No. Description5005-86 Very fine curved jaws, 5″ (12.7 cm)
5005-88 Curved, 1 x 2 teeth, 5" (12.7 cm)
SP
EC
IALT
Y
SP
EC
IALT
Y
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
6.316.30
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
SCANLAN® Samson™ Phlebectomy Products SCANLAN® Samson™ Phlebectomy Products
1
2
3
4
5
6
7
8
9
10
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25INCHES CM
SP
EC
IALT
Yht
tp://
ww
w.s
canl
anin
tern
atio
nal.c
om/in
stru
men
tatio
n/
6.32
THO
RA
CO
SC
OP
IC /
MIN
IMA
LLY
INVA
SIV
Eht
tp://
ww
w.s
canl
anin
tern
atio
nal.c
om/in
stru
men
tatio
n/va
ts-m
ics/
Use your Smart Phone and QR Reader software to photograph the code below which will take
you to this section on the Scanlan Website
CLAMPS Chitwood ........................................................................... 7.1 D’Amico ............................................................................. 7.3 Harken ............................................................................... 7.4.. DeBakey Cooley (Right Angle) .......................................... 7.5 Dennis Dissector ............................................................... 7.6 Allis .................................................................................... 7.7 Foerster ............................................................................ 7.8 Duval ............................................................................... 7.10 Node Grasper .................................................................. 7.11
FORCEPS Axial Handle .................................................................... 7.12 Spring Style ..................................................................... 7.13
NEEDLE HOLDERS Axial Handle .................................................................... 7.14.. Spring Style ..................................................................... 7.16 Ring Handle ..................................................................... 7.17
SCISSORS Ring Handle ..................................................................... 7.20
SPECIALTY Suction Instruments D’Amico ................................................................... 7.22 Wolf ......................................................................... 7.23 Dennis ..................................................................... 7.24.. D'Amico Mediastinoscopy Biopsy Forceps ...................... 7.25 Chitwood Suture Cutter ................................................... 7.26 Chitwood Knot Tier / Pusher ............................................ 7.27 Chitwood Suture Puller .................................................... 7.28 Reliance Bulldog Applier / Introducer .............................. 7.28
THO
RA
CO
SC
OP
IC /
MIN
IMA
LLY
INVA
SIV
Eht
tp://
ww
w.s
canl
anin
tern
atio
nal.c
om/in
stru
men
tatio
n/va
ts-m
ics/
Modification Description904.. Angle jaws/tips904..A Angle and cut down jaws/tips905 Cut down jaws/tips905B Cut down scissors blades905TC Cut down carbon inlay jaws/tips907 Angled shanks - down907B Angled shanks - up911 Cut down shanks912 Blunt tips of scissors912A Sharpen tips of scissors915 Gold plating924.. Tension modification928 Modify to left-handed instrument (ring
style)928A Modify to left-handed instrument (spring
style)929 Special etching965 Remove ratchets on ring handle instru-
ments971 Lengthen instrument973 Shorten instrument979 Add ratchet to instrument (Spring style)
9909-221 with modification 965
9009-650 with modification 905
9909-221
9009-650
Thoracoscopic n Modifications
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
7.1
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
THO
RA
CO
SC
OP
IC /
MIN
IMA
LLY
INVA
SIV
Eht
tp://
ww
w.s
canl
anin
tern
atio
nal.c
om/in
stru
men
tatio
n/va
ts-m
ics/
n Chitwood DeBakey Clamps Developed in cooperation with W. Randolph Chitwood, Jr. , MD
Cat. No. Description Shaft
Working Length
Total Length
9909-912 6.5 cm curved left 1x2 DeBakey jaws, with ratchet
10 mm 9″(23 cm)
12 3/4″ (32.5 cm)
9909-912-13 10 cm curved left 1x2 DeBakey jaws, with ratchet
10 mm 10″ (25.4.. cm)
14 1/4″ (36 cm)
9909-232 10 cm curved left 2x3 DeBakey jaws, with ratchet
10 mm 10″ (25.4.. cm)
14 1/4″ (36 cm)
Instrument jaws are shownapproximate size
1 x 2 DeBakey Jaws(9909-912)
1 x 2 DeBakey Jaws(9909-912-13)
2 x 3 DeBakey Jaws(9909-232)
9909-912-13
Clamps n Chitwood DeBakey
n D’Amico DeBakey Clamps, Tapered 1 x 2 DeBakey Jaws Developed in cooperation with Thomas A. D’Amico, MD
Cat. No. Description Shaft
Working Length
Total Length
9909-221 11 cm curved left jaws, with ratchet
10 mm 10″ (25.4 cm)
14 1/2″ (37 cm)
9909-222 11.5 cm straight jaws, with ratchet
10 mm 10 1/2″ (27 cm)
14 3/4″ (37.5 cm)
Straight 1 x 2 Tapered DeBakey Jaws(9909-222)
Curved 1 x 2 Tapered DeBakey Jaws(9909-221)
D’Amico Tapered Jaw Tip Compared to
Chitwood DeBakey Jaw Tip9909-221D’Amico curved tapered 1 x 2 DeBakey jaws
9909-912-13Chitwood curved 1 x 2 DeBakey jaws
Instrument jaws are shownapproximate size
9909-221
n Chitwood DeBakey Clamps Developed in cooperation with W. Randolph Chitwood Jr. , MD
Cat. No. Description Shaft
Working Length
Total Length
9009-240 6 cm curved left 1x2 DeBakey jaws, with ratchet
5 mm 8 1/4″ (21 cm)
12 1/4″ (31 cm)
1 x 2 DeBakey Jaws(9009-240)
Instrument jaws are shownapproximate size
9009-240
THO
RA
CO
SC
OP
IC /
MIN
IMA
LLY
INVA
SIV
E
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
vats
-mic
s/
7.37.2
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
THO
RA
CO
SC
OP
IC /
MIN
IMA
LLY
INVA
SIV
Eht
tp://
ww
w.s
canl
anin
tern
atio
nal.c
om/in
stru
men
tatio
n/va
ts-m
ics/
Clamps n D’Amico DeBakeyClamps n Chitwood DeBakey
n DeBakey Cooley Forceps, 90° Angled Jaws (Right Angle)
Cat. No. Description Shaft
Working Length
Total Length
9909-202 With ratchet 10 mm 9 1/2″ (24 cm)
13 1/2″ (34 cm)
9909-203 Without ratchet 10 mm 9 1/2″ (24 cm)
13 1/2″ (34 cm)
90º Angled Jaws(9909-202 and 9909-203)
Instrument jaws are shownapproximate size
9909-203
n Harken Clamps, Tapered DeBakey Jaws
Cat. No. Description Shaft
Working Length
Total Length
9909-224 Harken #1, 9.5 cm tapered 1x2 DeBakey jaws, without ratchet
10 mm 9 7/8″ (24.8 cm)
14″ (35.5 cm)
9909-225 Harken #1, 9.5 cm tapered 1x2 DeBakey jaws, with ratchet
10 mm 9 7/8″ (24.8 cm)
14″ (35.5 cm)
9909-226 Harken #2, 9.5 cm tapered 1x2 DeBakey jaws, without ratchet
10 mm 9 7/8″ (24.8 cm)
14″ (35.5 cm)
9909-227 Harken #2, 9.5 cm tapered 1x2 DeBakey jaws, with ratchet
10 mm 9 7/8″ (24.8 cm)
14″ (35.5 cm)
Harken #1Tapered 1 x 2 DeBakey Jaws (9909-224 and 9909-225)
Harken #2Tapered 1 x 2 DeBakey Jaws (9909-226 and 9909-227)
Instrument jaws are shownapproximate size
9909-224
THO
RA
CO
SC
OP
IC /
MIN
IMA
LLY
INVA
SIV
E
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
vats
-mic
s/
7.57.4
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
THO
RA
CO
SC
OP
IC /
MIN
IMA
LLY
INVA
SIV
Eht
tp://
ww
w.s
canl
anin
tern
atio
nal.c
om/in
stru
men
tatio
n/va
ts-m
ics/
Clamps n DeBakey Cooley ForcepsClamps n Harken DeBakey
n Allis Forceps, Curved Left, 6 mm Width Jaws
Cat. No. Description Shaft
Working Length
Total Length
9009-270 With ratchet 7 mm 9″ (23 cm)
13 1/4″ (33.5 cm)
Curved Left, 6 mm Jaw Width (9009-270)
Instrument jaws are shownapproximate size
9009-270
n Dennis Dissector, Curved Left Serrated Jaws
Cat. No. Description Shaft
Working Length
Total Length
9009-280 With ratchet 7 mm 9″ (23 cm)
13 1/4″ (33.5 cm)
Curved Jaws(9009-280)
Instrument jaws are shownapproximate size
9009-280
THO
RA
CO
SC
OP
IC /
MIN
IMA
LLY
INVA
SIV
E
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
vats
-mic
s/
7.77.6
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
THO
RA
CO
SC
OP
IC /
MIN
IMA
LLY
INVA
SIV
Eht
tp://
ww
w.s
canl
anin
tern
atio
nal.c
om/in
stru
men
tatio
n/va
ts-m
ics/
Clamps n Allis ForcepsClamps n Dennis Dissector
n Foerster Clamps
Instrument jaws are shownapproximate size
9009-226
Cat. No. Description Shaft
Working Length
Total Length
9009-226 Curved left 12 mm oval ring jaws, with ratchet
7 mm 9 1/4″ (23.5 cm)
13 1/4″(33.5 cm)
9909-920 Curved left 20 mm oval ring jaws, with ratchet
10 mm 9 1/2″ (24 cm)
13 1/4″(33.5 cm)
NEW 9909-923 Deep curve left 20 mm oval ring jaws, with ratchet 10 mm 9 1/2" (24 cm)
13" (33 cm)
12 mm Oval Ring Jaws(9009-226)
20 mm Oval Ring Jaws(9909-920)
20 mm Deep Curve Oval Ring Jaws(9909-923)
Curved Left 12 mm Oval Ring Jaws(9009-228)
Curved Right (Left-Hand Style) 12 mm Oval Ring Jaws(9009-227)
Curved Left 20 mm Oval Ring Jaws(9909-922)
Curved Right (Left-Hand Style) 20 mm Oval Ring Jaws(9909-921)
9909-922
n Foerster Clamps
Cat. No. Description Shaft
Working Length
Total Length
NEW 9009-227 Curved right (left-hand style) 12 mm oval ring jaws, with ratchet
7 mm 7 1/2" (19 cm)
11 1/2" (29 cm)
NEW 9009-228 Curved left 12 mm oval ring jaws, with ratchet 7 mm 7 1/2" (19 cm)
11 1/2" (29 cm)
NEW 9909-921 Curved right (left-hand style) 20 mm oval ring jaws, with ratchet
10 mm 7 1/2" (19 cm)
11 1/2" (29 cm)
NEW 9909-922 Curved left 20 mm oval ring jaws, with ratchet 10 mm 7 1/2" (19 cm)
11 1/2" (29 cm)
THO
RA
CO
SC
OP
IC /
MIN
IMA
LLY
INVA
SIV
E
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
vats
-mic
s/
7.97.8
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
THO
RA
CO
SC
OP
IC /
MIN
IMA
LLY
INVA
SIV
Eht
tp://
ww
w.s
canl
anin
tern
atio
nal.c
om/in
stru
men
tatio
n/va
ts-m
ics/
Clamps n Lung Grasping n Foerster ClampClamps n Lung Grasping n Foerster Clamp
n Node Grasper
Cat. No. Description Shaft
Working Length
Total Length
9009-222 Straight 11 mm oblong ring jaws,with ratchet
5 mm 9″ (23 cm)
13″ (33 cm)
9009-223 Curved left 11 mm oblong ring jaws,with ratchet
5 mm 9″ (23 cm)
13″ (33 cm)
11 mm Oblong Ring JawsStraight (9009-222)
11 mm Oblong Ring JawsCurved (9009-223)
Instrument jaws are shownapproximate size
9009-223
n Duval Clamps
Cat. No. Description Shaft
Working Length
Total Length
9909-926 Curved left 1 cm width triangular jaws, with ratchet
10 mm 9 1/4″ (23.5 cm)
13 1/2″(34 cm)
9909-927 Curved left 2.5 cm width triangular jaws, with ratchet
10 mm 9 1/4″ (23.5 cm)
13 1/2″ (34 cm)
1 cm Jaw Width (9909-926)
2.5 cm Jaw Width (9909-927)
Instrument jaws are shownapproximate size
9909-926
THO
RA
CO
SC
OP
IC /
MIN
IMA
LLY
INVA
SIV
E
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
vats
-mic
s/
7.117.10
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
THO
RA
CO
SC
OP
IC /
MIN
IMA
LLY
INVA
SIV
Eht
tp://
ww
w.s
canl
anin
tern
atio
nal.c
om/in
stru
men
tatio
n/va
ts-m
ics/
Clamps n Node GrasperClamps n Lung Grasping n Duval Clamp
n Jacobson DeBakey Forceps, Round Handle
Cat. No. Description Shaft
Working Length
Total Length
9009-420 1 mm width, straight jaws,without ratchet
5 mm 7 3/4″ (19.5 cm)
16″ (41 cm)
9009-422 2 mm width, straight jaws, without ratchet
5 mm 7 3/4″ (19.5 cm)
16″ (41 cm)
DeBakey Jaws, 1 mm Width(9009-420)
DeBakey Jaws, 2 mm Width(9009-422)
Instrument jaws are shownapproximate size
9009-422
n Axial Handle Forceps, Round Handle
Cat. No. Description Shaft
Working Length
Total Length
9009-510 Resano jaws, 2.5 mm width, without ratchet 5 mm 8″ (20 cm)
14 1/4″ (36 cm)
9009-511 Resano jaws, 2.5 mm width, with ratchet 5 mm 8″ (20 cm)
14 1/4″ (36 cm)
9009-512 Russian jaws, 6 mm width, without ratchet 5 mm 8″ (20 cm)
14 1/4″ (36 cm)
9009-513 Russian jaws, 6 mm width, with ratchet 5 mm 8″ (20 cm)
14 1/4″ (36 cm)
9009-516 Platform DIAMOND DUST™ jaws, 2 mm width, without ratchet
5 mm 8″ (20 cm)
14 1/4″ (36 cm)
9009-517 Platform DIAMOND DUST™ jaws, 2 mm width, with ratchet
5 mm 8″ (20 cm)
14 1/4″ (36 cm)
9009-520 DeBakey jaws, 1.5 mm width, without ratchet 5 mm 8″ (20 cm)
14 1/4″ (36 cm)
9009-521 DeBakey jaws, 1.5 mm width, with ratchet 5 mm 8″ (20 cm)
14 1/4″ (36 cm)
9009-522 DeBakey jaws, 2.5 mm width, without ratchet 5 mm 8″ (20 cm)
14 1/4″ (36 cm)
9009-523 DeBakey jaws, 2.5 mm width, with ratchet 5 mm 8″ (20 cm)
14 1/4″ (36 cm)
9009-524 DeBakey jaws, 3.5 mm width, without ratchet 5 mm 8″ (20 cm)
14 1/4″ (36 cm)
9009-525 DeBakey jaws, 3.5 mm width, with ratchet 5 mm 8″ (20 cm)
14 1/4″ (36 cm)
Resano Jaws, 2.5 mm Width(9009-510 and 9009-511)
DeBakey Jaws, 1.5 mm Width(9009-520 and 9009-521)
Russian Jaws, 6 mm Width(9009-512 and 9009-513)
DeBakey Jaws, 2.5 mm Width(9009-522 and 9009-523)
Platform DIAMOND DUST™Jaws, 2 mm Width(9009-516 and 9009-517)
DeBakey Jaws, 3.5 mm Width(9009-524 and 9009-525)
Instrument jaws are shown approximate size
9009-525
THO
RA
CO
SC
OP
IC /
MIN
IMA
LLY
INVA
SIV
E
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
vats
-mic
s/
7.137.12
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
THO
RA
CO
SC
OP
IC /
MIN
IMA
LLY
INVA
SIV
Eht
tp://
ww
w.s
canl
anin
tern
atio
nal.c
om/in
stru
men
tatio
n/va
ts-m
ics/
Forceps n Spring StyleForceps n Axial Handle
n Axial Handle Needle Holders, Round Handle
Cat. No. Description ShaftWorking Length
Total Length
9009-560 Straight Carbon-Inlay jaws, without ratchet, gold-tipped handle (recommended suture size 4-0 and smaller)
7 mm 8″ (20 cm) 14 3/8″ (36.5 cm)
9009-561 Straight Carbon-Inlay jaws, with ratchet, gold-tipped handle (recommended suture size 4-0 and smaller)
7 mm 8″ (20 cm) 14 3/8″ (36.5 cm)
9009-562 Curved Carbon-Inlay jaws, without ratchet, gold-tipped handle(recommended suture size 4-0 and smaller)
7 mm 8″ (20 cm) 14 3/8″ (36.5 cm)
9009-563 Curved Carbon-Inlay jaws, with ratchet, gold-tipped handle (recommended suture size 4-0 and smaller)
7 mm 8″ (20 cm) 14 3/8″ (36.5 cm)
9009-570 Straight Carbon-Inlay jaws, without ratchet, gold-tipped handle (recommended suture size 2-0 and smaller)
7 mm 8″ (20 cm) 14 3/8″ (36.5 cm)
9009-571 Straight Carbon-Inlay jaws, with ratchet, gold-tipped handle(recommended suture size 2-0 and smaller)
7 mm 8″ (20 cm) 14 3/8″ (36.5 cm)
9009-572 Curved Carbon-Inlay jaws, without ratchet, gold-tipped handle (recommended suture size 2-0 and smaller)
7 mm 8″ (20 cm) 14 3/8″ (36.5 cm)
9009-573 Curved Carbon-Inlay jaws, with ratchet, gold-tipped handle (recommended suture size 2-0 and smaller)
7 mm 8″ (20 cm) 14 3/8″ (36.5 cm)
Straight Carbon-Inlay Jaws, for 4-0 Suture (9009-560 and 9009-561)
Straight Carbon-Inlay Jaws, for 2-0 Suture (9009-570 and 9009-571)
Curved Carbon-Inlay Jaws, for 4-0 Suture (9009-562 and 9009-563)
Curved Carbon-Inlay Jaws, for 2-0 Suture(9009-572 and 9009-573)
Instrument jaws are shown approximate size
9009-571
n Axial Handle Needle Holders, Round Handle
Cat. No. Description ShaftWorking Length
Total Length
9009-540 Straight DIAMOND DUST™ jaws, without ratchet(recommended suture size 7-0 and smaller)
5 mm 8″ (20 cm) 14 3/8″ (36.5 cm)
9009-541 Straight DIAMOND DUST™ jaws, with ratchet (recommended suture size 7-0 and smaller)
5 mm 8″ (20 cm) 14 3/8″ (36.5 cm)
9009-542 Curved DIAMOND DUST™ jaws, without ratchet (recommended suture size 7-0 and smaller)
5 mm 8″ (20 cm) 14 3/8″ (36.5 cm)
9009-543 Curved DIAMOND DUST™ jaws, with ratchet (recommended suture size 7-0 and smaller)
5 mm 8″ (20 cm) 14 3/8″ (36.5 cm)
9009-550 Straight DIAMOND DUST™ jaws, without ratchet (recommended suture size 5-0 and smaller)
6 mm 8″ (20 cm) 14 3/8″ (36.5 cm)
9009-551 Straight DIAMOND DUST™ jaws, with ratchet (recommended suture size 5-0 and smaller)
6 mm 8″ (20 cm) 14 3/8″ (36.5 cm)
9009-552 Curved DIAMOND DUST™ jaws, without ratchet (recommended suture size 5-0 and smaller)
6 mm 8″ (20 cm) 14 3/8″ (36.5 cm)
9009-553 Curved DIAMOND DUST™ jaws, with ratchet (recommended suture size 5-0 and smaller)
6 mm 8″ (20 cm) 14 3/8″ (36.5 cm)
Straight DIAMOND DUST™
Jaws, for 7-0 Suture(9009-540 and 9009-541)
Straight DIAMOND DUST™
Jaws, for 5-0 Suture (9009-550 and 9009-551)
Curved DIAMOND DUST™
Jaws, for 7-0 Suture (9009-542 and 9009-543)
Curved DIAMOND DUST™ Jaws, for 5-0 Suture(9009-552 and 9009-553)
Instrument jaws are shown approximate size
9009-541
THO
RA
CO
SC
OP
IC /
MIN
IMA
LLY
INVA
SIV
E
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
vats
-mic
s/
7.157.14
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
THO
RA
CO
SC
OP
IC /
MIN
IMA
LLY
INVA
SIV
Eht
tp://
ww
w.s
canl
anin
tern
atio
nal.c
om/in
stru
men
tatio
n/va
ts-m
ics/
Needle Holders n Axial HandleNeedle Holders n Axial Handle
n SCANLAN® Needle Holder, DIAMOND DUST™ Jaws, Ring Handle (Recommended suture size: 5-0 and smaller)
Cat. No. Description Shaft
Working Length
Total Length
9009-618 Straight jaws, with ratchet 5 mm 6 1/2″ (16.5 cm)
10 1/2″ (27 cm)
Straight DIAMOND DUST™ Jaws, for 5-0 Suture(9009-618) Instrument jaws are shown approximate size
9009-618
n Jacobson Needle Holder, DIAMOND DUST™ Jaws, Round Handle (Recommended suture size: 5-0 and smaller)
Cat. No. Description Shaft
Working Length
Total Length
9009-648 Straight jaws, with ratchet 5 mm 6 1/2″ (16.5 cm)
15 3/8″ (38.5 cm)
* 9009-650 Curved jaws, with ratchet 5 mm 6 1/2″ (16.5 cm)
15 3/8″ (38.5 cm)
Straight DIAMOND DUST™ Jaws, for 5-0 Suture (9009-648)
Curved DIAMOND DUST™ Jaws, for 5-0 Suture (9009-650) Instrument jaws are shown approximate size
9009-648
THO
RA
CO
SC
OP
IC /
MIN
IMA
LLY
INVA
SIV
E
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
vats
-mic
s/
7.177.16
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
THO
RA
CO
SC
OP
IC /
MIN
IMA
LLY
INVA
SIV
Eht
tp://
ww
w.s
canl
anin
tern
atio
nal.c
om/in
stru
men
tatio
n/va
ts-m
ics/
Needle Holders n Ring HandleNeedle Holders n Spring Style
n SCANLAN® Needle Holder, Carbon-Inlay Jaws, Gold Ring Handle (Recommended suture size: 2-0 and smaller)
Cat. No. Description Shaft
Working Length
Total Length
9909-610 Straight jaws, with ratchet 10 mm 8 1/4″(21 cm)
13 1/2″ (34 cm)
9909-612 Curved jaws, with ratchet 10 mm 8 1/4″(21 cm)
13 1/2″ (34 cm)
Straight Carbon-Inlay Jaws, for 2-0 Suture(9909-610)
Curved Carbon-Inlay Jaws, for 2-0 Suture(9909-612)
Instrument jaws are shown approximate size
9909-610
n SCANLAN® Needle Holder, Carbon-Inlay Jaws, Gold Ring Handle (Recommended suture size: 4-0 and smaller)
Cat. No. Description Shaft
Working Length
Total Length
9009-640 Straight jaws, with ratchet 7 mm 8 1/2″(21.5 cm)
13 1/2″ (34 cm)
9009-642 Curved jaws, with ratchet 7 mm 8 1/2″ (21.5 cm)
13 1/2″ (34 cm)
Straight Carbon-Inlay Jaws, for 4-0 Suture(9009-640)
Curved Carbon-Inlay Jaws, for 4-0 Suture(9009-642)
Instrument jaws are shown approximate size
9009-640
THO
RA
CO
SC
OP
IC /
MIN
IMA
LLY
INVA
SIV
E
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
vats
-mic
s/
7.197.18
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
THO
RA
CO
SC
OP
IC /
MIN
IMA
LLY
INVA
SIV
Eht
tp://
ww
w.s
canl
anin
tern
atio
nal.c
om/in
stru
men
tatio
n/va
ts-m
ics/
Needle Holders n Ring HandleNeedle Holders n Ring Handle
n Metzenbaum SUPER CUT™ Scissors, Black Platinum Ring Handle
Cat. No. Description Shaft
Working Length
Total Length
9909-910SC Curved blades, blunt tips, 3.5 cm blade length 10 mm 7 3/4″ (19.5 cm)
11 1/2″ (29 cm)
Curved Blades(9909-910SC)
Instrument jaws are shown approximate size
9909-910SCprofile of blade curvature
n SCANLAN® SUPER CUT™ Scissors, Black Platinum Ring Handle Developed in cooperation with W. Randolph Chitwood Jr. , MD
Cat. No. Description
Shaft Diameter
Working Length
Total Length
* 9009-716SC Straight, fine blades, blunt tips, 1 cm blade length 5 mm 6 1/2" (16.5 cm)
10 1/2"(27 cm)
9009-738SC Chitwood dissecting scissors, curved blades, blunt tips, 3 cm blade length
5 mm 7 1/4″ (18.5 cm)
11 1/2″ (29 cm)
Curved Blades (9009-738SC)
Instrument jaws are shown approximate size
9009-738SCprofile of blade curvature
Straight Blades (9009-716SC)
THO
RA
CO
SC
OP
IC /
MIN
IMA
LLY
INVA
SIV
E
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
vats
-mic
s/
7.217.20
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
THO
RA
CO
SC
OP
IC /
MIN
IMA
LLY
INVA
SIV
Eht
tp://
ww
w.s
canl
anin
tern
atio
nal.c
om/in
stru
men
tatio
n/va
ts-m
ics/
Scissors n Ring HandleScissors n Ring Handle
n Wolf Suction Instrument, Curved, Blunt Tip, Yankauer Handle Developed in cooperation with Randall K. Wolf, MD
Cat. No. Description
Shaft Diameter
Working Length
Total Length
9009-908 6 mm tip diameter, fixed suction 3.2 mm 6 3/4″ (17 cm)
12 1/4″ (31 cm)
9009-909 6 mm tip diameter, variable suction 3.2 mm 6 3/4″ (17 cm)
12 1/4″(31 cm)
9009-910 6 mm tip diameter, fixed suction 3.2 mm 8 3/4″ (22 cm)
14 1/4″ (36 cm)
9009-911 6 mm tip diameter, variable suction 3.2 mm 8 3/4″ (22 cm)
14 1/4″ (36 cm)
6 mm Tip Diameter(All Models)
Variable Suction Regulator(9009-909 and 9009-911)
Suction tips are shown approximate size
9009-910
n D’Amico Suction Instrument, Straight, Blunt Tip, Yankauer Handle Developed in cooperation with Thomas A. D’Amico, MD
n D’Amico Suction Instrument, 5 mm, Straight, Blunt Tip, Yankauer Handle Developed in cooperation with Thomas A. D’Amico, MD
Cat. No. Description
Shaft Diameter
Working Length
Total Length
9009-900 5 mm tip diameter, fixed suction 5 mm 12 1/2″ (32 cm)
17 3/4″ (45.5 cm)
9009-901 5 mm tip diameter, variable suction 5 mm 12 1/2″ (32 cm)
17 3/4″ (45.5 cm)
** 9009-905 Brush set, pack of 10, for 5 mm D’Amico 3.2 mm Wolf and 5 mm Dennis Suction Instruments
19" (48.3 cm)
Cat. No. Description
Shaft Diameter
Working Length
Total Length
9009-920 10 mm tip diameter, fixed suction 10 mm 12 1/2″ (32 cm)
17 3/4″ (45.5 cm)
9009-921 10 mm tip diameter, variable suction 10 mm 12 1/2″ (32 cm)
17 3/4″ (45.5 cm)
** 9009-922 Brush set, pack of 10, for 10 mm D’Amico Suction Instruments 19" (48.3 cm)
5 mm Tip Diameter(9009-900 and 9009-901)
10 mm Tip Diameter(9009-920 and 9009-921)
Variable Suction Regulator(9009-901)
Suction tips are shown approximate size
Suction tips shown approximate size
9009-900
9009-920
Variable Suction Regulator(9009-921)
THO
RA
CO
SC
OP
IC /
MIN
IMA
LLY
INVA
SIV
E
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
vats
-mic
s/
7.237.22
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
THO
RA
CO
SC
OP
IC /
MIN
IMA
LLY
INVA
SIV
Eht
tp://
ww
w.s
canl
anin
tern
atio
nal.c
om/in
stru
men
tatio
n/va
ts-m
ics/
Suction Instruments / WolfSuction Instruments / D’Amico
n D'Amico Mediastinoscopy Biopsy Forceps, Ring Handle Developed in cooperation with Thomas A. D’Amico, MD
Cat. No. Description Shaft
Working Length
Total Length
NEW 9009-300 6 mm width oval ring jaw, with ratchet 7 mm 11"(28 cm)
15"(38 cm)
NEW 9009-301 6 mm width oval ring jaw, without ratchet 7 mm 11"(28 cm)
15"(38 cm)
NEW 9009-310 7 mm width oval cupped jaws, with ratchet 7 mm 11"(28 cm)
15"(38 cm)
NEW 9009-311 7 mm width oval cupped jaws, without ratchet 7 mm 11"(28 cm)
15"(38 cm)
9009-311
6 mm Oval Ring Jaw(9009-300 and 9009-301)
7 mm Oval Cupped Jaws(9009-310 and 9009-311)n Dennis Suction Instrument, Curved, Blunt Tip, Yankauer Handle
Cat. No. Description
Shaft Diameter
Working Length
Total Length
9009-914 7.5 mm tip diameter, fixed suction 5 mm 8 3/4″(22 cm)
14 1/4″(36 cm)
9009-915 7.5 mm tip diameter, variable suction 5 mm 8 3/4″(22 cm)
14 1/4″(36 cm)
9009-916 7.5 mm tip diameter, fixed suction 5 mm 12 1/2″ (32 cm)
17 3/4″(45.5 cm)
9009-917 7.5 mm tip diameter, variable suction 5 mm 12 1/2″ (32 cm)
17 3/4″(45.5 cm)
7.5 mm Tip Diameter(All Models)
Suction tips are shown approximate size
Variable Suction Regulator(9009-915 and 9009-917)
9009-916
THO
RA
CO
SC
OP
IC /
MIN
IMA
LLY
INVA
SIV
E
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
vats
-mic
s/
7.257.24
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
THO
RA
CO
SC
OP
IC /
MIN
IMA
LLY
INVA
SIV
Eht
tp://
ww
w.s
canl
anin
tern
atio
nal.c
om/in
stru
men
tatio
n/va
ts-m
ics/
D'Amico Mediastinoscopy Biopsy Forcep, Ring HandleSuction Instruments / Dennis
n Chitwood Knot Pusher, Jacobson Round Handle Developed in cooperation with W. Randolph Chitwood Jr., MD
Cat. No. Description Shaft
Working Length
Total Length
9009-827-11 Mini “Trap Model”, for 4-0 and smaller suture, without ratchet
5 mm 5 1/8" (13 cm)
11"(28 cm)
9009-827-12 Mini “Trap Model”, for 4-0 and smaller suture, without ratchet
5 mm 5 1/2″ (14 cm)
12″ (30.5 cm)
9009-828 Original “Trap Model”, for 2-0 and smaller suture, without ratchet
5 mm 6 1/8″ (15.5 cm)
12 1/2″ (32 cm)
9009-828-16 Original “Trap Model”, for 2-0 and smaller suture, without ratchet
5 mm 7 1/4" (18.5 cm)
15 3/4"(40 cm)
Mini Tip Size(9009-827-12, 9009-827-11)
Original Tip Size(9009-828 and 9009-828-16)
Instrument jaws are shown approximate size
9009-828
Use your Smart Phone and QR Reader software to photograph
the code below to view a Video Demonstration
of the Chitwood Knot Pusher
n Chitwood SUPER CUT™ Suture Cutter (for 2-0 and smaller suture) Developed in cooperation with W. Randolph Chitwood Jr., MD
Cat. No. Description
Shaft Diameter
Working Length
Total Length
9009-838SC “Trap model,” Black Platinum ring handle Fits through 12 mm endoport
5 mm 7″ (18 cm)
11″ (28 cm)
9009-840SC “Trap model,” Black Platinum ring handle Fits through 12 mm endoport
5 mm 9″ (23 cm)
13″ (33 cm)
9009-842SC “Trap model,” Black Platinum ring handle Fits through 12 mm endoport
5 mm 11″ (28 cm)
15″ (38 cm)
(All models)Instrument jaws are shown approximate size
9009-840SC
THO
RA
CO
SC
OP
IC /
MIN
IMA
LLY
INVA
SIV
E
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
vats
-mic
s/
7.277.26
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
THO
RA
CO
SC
OP
IC /
MIN
IMA
LLY
INVA
SIV
Eht
tp://
ww
w.s
canl
anin
tern
atio
nal.c
om/in
stru
men
tatio
n/va
ts-m
ics/
Chitwood Knot PusherChitwood Suture Cutter
See the Specialty Section for Reliance Bulldog Clamps
n Reliance Bulldog Clamp Applier / Introducer
9009-395
Instrument jaws are shownapproximate size
Cat. No. Description ShaftWorking Length
Total Length
NEW 9009-395 Straight jaws with ratchet 7 mm 13 3/4″ (35 cm) 17 1/3″ (44 cm)
n Chitwood Suture Puller, Straight Developed in cooperation with W. Randolph Chitwood Jr. , MD
9009-816
Cat. No. Description ShaftWorking Length
Total Length
9009-816 1.75 mm tip, total length 3.1 mm 7 1/2" (19 cm) 11 1/2" (29 cm)
9009-820 3.1 mm tip, total length 3.1 mm 7 1/2" (19 cm) 11 1/2" (29 cm)
3.1 mm Tip(9009-820)
1.75 mm Tip(9009-816)
Reliance Bulldog Applier / Introducer
THO
RA
CO
SC
OP
IC /
MIN
IMA
LLY
INVA
SIV
E
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
enta
tion/
vats
-mic
s/
7.28
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Chitwood Suture Puller
NE
UR
OS
UR
GIC
AL
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
Use your Smart Phone and QR Reader software to photograph the code below which will take
you to this section on the Scanlan Website
BIOPSY NEEDLE . . . . . . . . . . . . . . . . . . . . . . . . . . 8.1DURA CLOSURE SET . . . . . . . . . . . . . . . . . . . . . . 8.2LEGACY TITANIUM FORCEPS . . . . . . . . . . . . . . . 8.3LOFTUS™ ACDF DISTRACTOR . . . . . . . . . . . . . . . 8.4SCANLAN® SUPERCUT™ MICROSURGICAL KNIVES . . . . . . . . . . . . . . . . . . 8.5
TITANIUM INSTRUMENTATION Titanium Needle Holders . . . . . . . . . . . . . . . . . . 8.6 Titanium Forceps . . . . . . . . . . . . . . . . . . . . . . . 8.12
SCANLAN® MICRO INSTRUMENTATION . . . . . . 8.21
FORCEPS Micro Tips, Round Handle . . . . . . . . . . . . . . . . 8.23 Gerald . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.26 DeBakey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.28 Needle Pulling Tissue . . . . . . . . . . . . . . . . . . . 8.29 Bayonet-Style . . . . . . . . . . . . . . . . . . . . . . . . . 8.30
NEEDLE HOLDERS Spring Style . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.32 Bayonet-Style . . . . . . . . . . . . . . . . . . . . . . . . . 8.35
ABDULRAUF™ EC/IC Set . . . . . . . . . . . . . . . . . . . 8.37
SCISSORS Ring Handle. . . . . . . . . . . . . . . . . . . . . . . . . . . 8.39 Bayonet-Style . . . . . . . . . . . . . . . . . . . . . . . . . 8.43 Spring Style . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.45
SUNDT™ SUCTION Sundt™ Graduated Suction System . . . . . . . . . 8.48
CAROTID INSTRUMENTATION SCANLAN® Loftus™ Carotid Endarterectomy Set . . . 8.50 Scissors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.52 Titanium Loftus™ Shunt Clamps. . . . . . . . . . . . . . . . . 8.53 Titanium Baby Vascular Clamps . . . . . . . . . . . . . . . . 8.54 Baby Vascular Clamps. . . . . . . . . . . . . . . . . . . . . . . . 8.55 Right Angle Forceps . . . . . . . . . . . . . . . . . . . . . . . . . 8.56 Dissectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.57
TEMPORARY OCCLUSION CLIPS SCANLAN® Heifetz™ Clips. . . . . . . . . . . . . . . . . . . . . 8.58 Yasargil-Type Clips . . . . . . . . . . . . . . . . . . . . . . . . . . 8.59
MICRO DISSECTORS Ochsner Knives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.61 Jacobson and Yasargil Knives. . . . . . . . . . . . . . . . . . 8.62 Raspatories / Curette. . . . . . . . . . . . . . . . . . . . . . . . . 8.63 Micro Hooks / Probes . . . . . . . . . . . . . . . . . . . . . . . . 8.64
Cat. No. Description1001-3000 Length 185 mm, window 10 mm, 5 per box
1001-3010 Length 250 mm, window 10 mm, 5 per box
n Single-Use Biopsy Needles
Cat. No. Description1001-3110 Length 250 mm, window 10 mm
1001-3115 Length 250 mm, window 5 mm
n Reusable Biopsy Needles
1001-3000
1001-3010
1001-3110
1001-31151001-3110
NE
UR
OS
UR
GIC
AL
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
1
2
3
4
5
6
7
8
9
10
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
INCHES CMSCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018
©2012 Scanlan International, Inc.
8.1
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
NE
UR
OS
UR
GIC
AL
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
Biopsy Needle
n Scanlan® Legacy Micro Forceps, Never Shear™ Dual Guide™, Round Handle
1.0 mm Tapered DeBakey Tips DIAMOND DUST™ Platform Tips
DIAMOND DUST™ Platform Tips with 1 x 2 Micro Teeth1.0 mm DIAMOND DUST™ Platform Ring Tips
Cat. No. 0.5 mm Tips
Cat. No. 1.0 mm Tips Description
3003-902N 3003-912N Straight tips, 7 1/8" (18.1 cm)
3003-904N 3003-914N Straight tips, 8 1/4" (21 cm)
3003-906N 3003-916N Straight tips, 9" (23 cm)
3003-908N 3003-918N Straight tips, 10" (25.4 cm)
3003-816N 3003-818N Bayonet, straight tips, 8 3/4" (22 cm)
Cat. No. 0.5 mm Tips
Cat. No. 1.0 mm Tips Description
3003-770N Puskas™, straight tips, 7 1/8" (18.1 cm)
3003-774N 3003-778N Puskas™, straight tips, 8 1/4" (21 cm)
3003-775N Puskas™, curved tips, 8 1/4" (21 cm)
3003-780N 3003-784N Straight tips, 9" (23 cm)
3003-782N 3003-786N Straight tips, 10" (25.4 cm)
3003-810N Bayonet, straight tips, 8 3/4" (22 cm)
Cat. No. Description3003-932N Straight tips, 7 1/8" (18.1 cm)
3003-934N Straight tips, 8 1/4" (21 cm)
3003-936N Straight tips, 9" (23 cm)
3003-938N Straight tips, 10" (25.4 cm)
3003-806N Bayonet, straight tips, 8 3/4" (22 cm)
Cat. No. Description3003-922N Straight tips, 7 1/8" (18.1 cm)
3003-924N Straight tips, 8 1/4" (21 cm)
3003-926N Straight tips, 9" (23 cm)
3003-928N Straight tips, 10" (25.4 cm)
3003-804N Bayonet, straight tips, 8 3/4" (22 cm)
Cat. No. Description9009-360N Minimally Invasive Fine Needle Holder, shanks curved sideways, (5 mm) with ratchet,
DIAMOND DUST™ jaws, ring handle, 11 1/2" (29 cm)
9009-364N Minimally Invasive Jacobson Needle Holder, round handle, (5 mm) down, DIAMOND DUST™ jaws, spring style, 12 1/2" (32 cm)
9009-380N Minimally Invasive Chitwood Knot Tier/Pusher (5 mm) 30 degree angled down, fine end, for 5.0 suture or smaller, 11 3/4" (30 cm)
Cat. No. Description** 2145-02N Dura Closure Set Metal Sterilization Tray, 10" x 16" x 2.5" (25.4 cm x 40.6 cm x 6.4 cm)
Cat. No. DescriptionShaft Diameter
Working Length
9009-716SCN Straight fine blades, blunt tips, 1 cm blade length, total length, 10 1/2" (27 cm)
5 mm 6 1/2" (16.5 cm)
** 9009-718SCN Curved fine blades, blunt tips, 1 cm blade length, total length, 10 1/2" (27 cm)
5 mm 6 1/2" (16.5 cm)
n Dura Closure Set - Catalog Number 9999-109N
n Instrument Sterilization Tray
n Optional Instruments – SCANLAN® SUPER CUT™ Scissors, Black Platinum Ring Handle
9009-716SCN
LEGACY Needle Holders
9009-364N
9009-924N
3003-342N
9009-380N9009-360N
2145-02N
Cat. No. DescriptionNEW 3003-342N With ratchet, 7″ (18 cm)
NEW 3003-344N With ratchet, 8″ (20 cm)
NEW 3003-346N With ratchet, 9″ (23 cm)
NEW 3003-348N With ratchet, 10″ (25.4 cm)
n SCANLAN® LEGACY Needle Holders, 10 mm Diameter Extended Knurling, DIAMOND DUST™ Jaws, Round Handle
Straight Jaws - Regular Box LockRecommended suture size: 7-0 and smaller
Cat. No. Description3003-352N With ratchet, 7″ (18 cm)
3003-354N With ratchet, 8″ (20 cm)
3003-356N With ratchet, 9″ (23 cm)
3003-358N With ratchet, 10″ (25.4 cm)
Straight Jaws - Streamline Box LockRecommended suture size: 5-0 and smaller
Dura Closure Set Cat. No. 9999-109N Full set, includes the following:
NE
UR
OS
UR
GIC
AL
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
8.38.2
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
NE
UR
OS
UR
GIC
AL
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
LEGACY Titanium ForcepsDura Closure Set
8008-81N
Cat. No. Description8008-81N Loftus™ Two Level ACDF Distractor
n Distractor
n SUPER CUT™ Microsurgical Knives
StraightHandle
8" (203 mm)
ShortHandle
5" (127 mm)
BayonetHandle
9" (229 mm)
Long BayonetHandle
11" (279 mm)
Straight Blade 1001-4101 1001-4102 1001-4103 1001-4104
Curved Blade 1001-4201 1001-4202 1001-4203 1001-4204
Round Blade 1001-4301 1001-4302 1001-4303 1001-4304
Pointed Blade 1001-4401 1001-4402 1001-4403 1001-4404
45º Angled Blade 1001-4501 1001-4502 1001-4503 1001-4504
NE
UR
OS
UR
GIC
AL
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
8.58.4
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
NE
UR
OS
UR
GIC
AL
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
SCANLAN® SUPER CUT™ Microsurgical KnivesLOFTUS™ ACDF Distractor
Cat. No. Description* 3003-90N Straight jaws, without ratchet, 4 3/4" (12 cm)
* 3003-90AN Straight jaws, with ratchet, 4 3/4" (12 cm)
* 3003-91N Curved jaws, without ratchet, 4 3/4" (12 cm)
* 3003-91AN Curved jaws, with ratchet, 4 3/4" (12 cm)
* 3003-93N Straight jaws, without ratchet, 6" (15 cm)
* 3003-93AN Straight jaws, with ratchet, 6" (15 cm)
* 3003-94N Curved jaws, without ratchet, 6" (15 cm)
3003-94-4N 0.4 mm jaws, without ratchet, 6" (15 cm)
* 3003-94AN Curved jaws, with ratchet, 6" (15 cm)
n Castroviejo Micro Needle Holders, Streamline Box Lock, DIAMOND DUST™ Jaws, Round Handle
Recommended suture size: 5-0 and smaller
n Jacobson Micro Needle Holders , Regular Box Lock, DIAMOND DUST™ Jaws, Round Handle
Straight Jaws - Regular Box Lock Recommended suture size: 7-0 and smaller
Curved Jaws - Regular Box Lock Recommended suture size: 7-0 and smaller
Curved Jaws - Regular Box Lock Recommended suture size: 8-0 and smaller
3003-177N
Instrument jaws are shownapproximate size
Instrument jaws are shownapproximate size
Instrument jaws are shownapproximate size
StraightDIAMOND DUST™ Jaws
Curved DIAMOND DUST™ Jaws
Cat. No. Description Cat. No. Description3003-171N With ratchet, 7 1/4″ (18.5 cm) 3003-175N With ratchet, 7 1/4" (18.5 cm)
3003-173N Without ratchet, 7 1/4″ (18.5 cm) 3003-177N Without ratchet, 7 1/4" (18.5 cm)
3003-181N With ratchet, 8″ (20 cm) * 3003-185N With ratchet, 8" (20 cm)
* 3003-183N Without ratchet, 8″ (20 cm) 3003-187N With ratchet, 8" (20 cm)
Cat. No. Description3003-177-4N 0.4 mm jaws, without ratchet,
7 1/4" (18.5 cm)
3003-177-3N 0.3 mm tapered jaws, without ratchet, 7 1/4" (18.5 cm)
3003-91AN
Instrument jaws are shownapproximate sizeStraight
DIAMOND DUST™ JawsCurved
DIAMOND DUST™ Jaws
Cat. No. Description3003-190N With ratchet, 9″ (23 cm)
Straight Jaws - Streamline Box LockRecommended suture size: 5-0 and smaller
Instrument jaws are shownapproximate size
NE
UR
OS
UR
GIC
AL
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
8.78.6
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
NE
UR
OS
UR
GIC
AL
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
Titanium Needle Holders n Spring Style n Round Handle n Micro TipsTitanium Needle Holders n Spring Style n Round Handle n Micro Tips
Cat. No. Description3003-234-1N Fine jaws, with ratchet,
8 1/2″ (21.5 cm)
n Jacobson Micro Needle Holders, DIAMOND DUST™ Jaws, Flat Handle
n Jacobson Micro Needle Holders, DIAMOND DUST™ Jaws, Flat Handle
Cat. No. Description* 3003-238N With ratchet, 8 1/2" (21.5 cm)
Straight Jaws - Streamline Box LockRecommended suture size: 5-0 and smaller
Curved Jaws - Streamline Box LockRecommended suture size: 5-0 and smaller
Instrument jaws are shownapproximate size
n Richards Micro Needle Holders, Extra Fine Straight DIAMOND DUST™ Jaws, Ring Handle
Cat. No. Description3003-450N 6" (15 cm)
3003-452N 6 3/4" (17 cm)
3003-454N 7 1/2" (19 cm)
Recommended suture size: 6-0 and smaller
n Ryder Needle Holders, Straight DIAMOND DUST™ Jaws, Ring Handle
Cat. No. Description3003-430N 6" (15 cm)
3003-432N 6 3/4" (17 cm)
* 3003-434N 7 1/2" (19 cm)
Recommended suture size: 5-0 and smaller
3003-430N
Instrument jaws are shown
approximate size
StraightDIAMOND DUST™ Jaws
Cat. No. Description3003-243N With ratchet, 9 1/2" (24 cm)
Straight Jaws - Regular Box LockRecommended suture size: 7-0 and smaller
Instrument jaws are shownapproximate size
NE
UR
OS
UR
GIC
AL
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
8.98.8
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
NE
UR
OS
UR
GIC
AL
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
Titanium Needle Holders n Ring Handle n Micro Tips
3003-450N
Instrument jaws are shown
approximate size
StraightDIAMOND DUST™ Jaws
Titanium Needle Holders n Spring Style n Flat Handle n Micro Tips
3003-234-1N
Instrument jaws are shownapproximate sizeStraight
DIAMOND DUST™ JawsCurved
DIAMOND DUST™ Jaws
n SCANLAN® Micro Needle Holders, DIAMOND DUST™ Jaws, Ring Handle
Cat. No. Description3003-462N Straight jaws, 7 1/4" (18.5 cm)
3003-466N Straight jaws, 8 3/4" (22 cm)
Recommended suture size: 5-0 and smaller
3789-11TN
Instrument jaws are shownapproximate size
Instrument jaws are shownapproximate size
StraightDIAMOND DUST™ Jaws
StraightDIAMOND DUST™ Jaws
Curved DIAMOND DUST™ Jaws
n Micro Needle Holders, DIAMOND DUST™ Jaws, Streamline Box Lock, Flat Handle, Bayonet-Style
n Micro Needle Holders, DIAMOND DUST™ Jaws, Regular Box Lock, Round Handle, Bayonet-Style
Cat. No. Description* 3003-866N Straight jaws, with ratchet, 8 3/4" (22 cm)
3003-868N Straight jaws, without ratchet, 8 3/4" (22 cm)
3003-870N Curved jaws, with ratchet, 8 3/4" (22 cm)
* 3003-872N Curved jaws, without ratchet, 8 3/4" (22 cm)
Cat. No. Description3789-11TN Straight jaws, with ratchet, 9 1/2" (24 cm)
Recommended suture size: 6-0 and smaller
Recommended suture size: 6-0 and smaller
3003-866N3003-462N
Instrument jaws are shown
approximate size
StraightDIAMOND DUST™ Jaws
NE
UR
OS
UR
GIC
AL
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
8.118.10
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
NE
UR
OS
UR
GIC
AL
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
Titanium Needle Holders n Micro Tips n Bayonet-StyleTitanium Needle Holders n Ring Handle n Micro Tips
n Dennis Micro Forceps, DIAMOND DUST™ Platform Tips, Round Handle, Counterbalanced
Cat. No. Description3003-710N Straight tips, 7″ (18 cm)
* 3003-712N Curved tips, 7″ (18 cm)
3003-714N Straight tips, 8 1/4″ (21 cm)
* 3003-716N Curved tips, 8 1/4″ (21 cm)
Cat. No. Description3003-164N 1 mm ring tip, 6″ (15 cm)
3003-160N 1 mm ring tip, 7 1/4″ (18.5 cm)
* 3003-162N 2 mm ring tip, 7 1/4″ (18.5 cm)
n Micro Forceps, Straight DIAMOND DUST™ Ring Tips, Round Handle
Cat. No. Description3003-720N 7″ (18 cm)
* 3003-724N 8 1/4″ (21 cm)
n Dennis Micro Forceps, 1 mm Straight DIAMOND DUST™ Ring Tips, Round Handle, Counterbalanced
1 mm StraightDIAMOND DUST™ Ring Tips
2 mm StraightDIAMOND DUST™ Ring Tips
1 mm StraightDIAMOND DUST™ Ring Tips
3003-160N
3003-720N
PlatformTips
Straight PlatformDIAMOND DUST™
3003-710N
Curved PlatformDIAMOND DUST™
NE
UR
OS
UR
GIC
AL
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
8.138.12
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
NE
UR
OS
UR
GIC
AL
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
Titanium Forceps n Round Handle n Micro Ring TipsTitanium Forceps n Round Handle n Micro Platform Tips
Cat. No. Description3003-158N Straight tips, 7 1/4" (18.5 cm)
3003-158-3N Gerald type taper, Straight 0.3 mm tips, 7 1/4" (18.5 cm)
3003-158-4N Straight 0.4 mm tips, 7 1/4" (18.5 cm)
3003-158-8N Straight tips, 8 1/4" (21 cm)
* 3003-159N Gerald type taper, Curved tips, 7 1/4" (18.5 cm)
3003-159-4N Curved 0.4 mm tips, 7 1/4" (18.5 cm)
3003-159-3N Gerald type taper, Curved 0.3 mm tips, 7 1/4" (18.5 cm)
n Micro Forceps, DIAMOND DUST™ Platform Tips, Round Handle
PlatformTips
Straight PlatformDIAMOND DUST™
Curved PlatformDIAMOND DUST™
n Micro Suture Tying Forceps, DIAMOND DUST™ Platform Tips, Round Handle
Cat. No. Description3003-150N Straight tips, 4 3/4″ (12 cm)
3003-152N Curved tips, 4 3/4" (12 cm)
3003-154N Straight tips, 6" (15 cm)
3003-156N Curved tips, 6" (15 cm)
3003-154-4N Straight 0.4 mm tips, 6" (15 cm)
3003-156-4N Curved 0.4 mm tips, 6" (15 cm)
3003-154-3N Gerald type taper, Straight 0.3 mm tips, 6" (15 cm)
3003-156-3N Gerald type taper, Curved 0.3 mm tips, 6" (15 cm)
PlatformTips
Straight PlatformDIAMOND DUST™
3003-158-8N
3003-150N
Curved PlatformDIAMOND DUST™
n SCANLAN® DeBakey Micro Forceps, 1 mm Straight DeBakey Tips, Round Handle
Cat. No. Description3003-730N 7 1/8″ (18.1 cm)
3003-730N
NE
UR
OS
UR
GIC
AL
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
8.158.14
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
NE
UR
OS
UR
GIC
AL
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
Titanium Forceps n Round Handle n Micro DeBakey Tips
1 mm StraightDeBakey Tips
Titanium Forceps n Round Handle n Micro Platform Tips
n Gerald Forceps, 1 mm Straight DIAMOND DUST™ Platform Ring Tips, Flat Handle
Cat. No. Description3003-750N 7" (18 cm)
3003-752N 8" (20 cm)
n Gerald Forceps, Straight Tips, Flat Handle
Cat. No. Description3003-738N Delicate 1x2 fine teeth, 7" (18 cm)
3003-760N DIAMOND DUST™ platform tips, 7" (18 cm)
Cat. No. Description3003-740N 7″ (18 cm)
3003-742N 8″ (20 cm)
n Gerald DeBakey Forceps, 1 mm Straight DeBakey Tips, Flat Handle
n DeBakey Dissecting Forceps, Straight Tips, Flat Handle
Cat. No. Description3003-05N 1 mm tips, 7 3/4″ (19.5 cm)
3003-04N 2 mm tips, 7 3/4″ (19.5 cm)
3003-750N
3003-760N
3003-740N
1 mm Straight DeBakey Tips
2 mm Straight DeBakey Tips
3003-04N
StraightDeBakey Tips
1 mm DIAMOND DUST ™
Platform Ring Tips
Delicate 1x2Fine Tips
DIAMOND DUST ™
Platform Tips
NE
UR
OS
UR
GIC
AL
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
8.178.16
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
NE
UR
OS
UR
GIC
AL
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
Titanium Forceps n Flat Handle n DeBakey TipsTitanium Forceps n Flat Handle n Gerald Tips
n Tumor Grasping Forceps, Concave Serrated Tips, Flat Handle, Bayonet Style
n Micro Forceps, 1 x 2 Fine Teeth, Straight Tips, Flat Handle, Bayonet-Style
Cat. No. Description3003-823N 3 mm tips, 8 3/4" (22 cm)
3003-825N 5 mm tips, 8 3/4" (22 cm)
Cat. No. Description3003-832N 0.7 mm tips, 1x2 fine teeth, 8 3/4" (22 cm)
n Micro Forceps, Straight Tips, Flat Handle, Bayonet-Style
Cat. No. Description3003-840N 0.3 mm curved up, 8 3/4" (22 cm)
3003-841N 0.3 mm 45° angle, DIAMOND DUST™ tips, 8 3/4" (22 cm)
3003-842N 0.3 mm DIAMOND DUST™ tips, 8 3/4" (22 cm)
3003-843N 0.3 mm smooth tips, 8 3/4" (22 cm)
3003-846N 0.7 mm DIAMOND DUST™ tips, 8 3/4" (22 cm)
3003-847N 0.7 mm smooth tips, 8 3/4" (22 cm)
Concave Serrated Tips
0.7 mm Tips1 x 2 Fine Teeth
3003-823N
3003-832N
0.3 mm Smooth Tips
0.7 mm DIAMOND DUST™ Tips
0.7 mm Smooth Tips
Curved DIAMOND DUST™ Tips
45° Angled DIAMOND DUST™ Tips
3003-843N
NE
UR
OS
UR
GIC
AL
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
8.198.18
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
NE
UR
OS
UR
GIC
AL
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
Titanium Forceps n Flat Handle n Bayonet-StyleTitanium Forceps n Flat Handle n Bayonet-Style
n Micro Forceps, Ring Tips, Flat Handle, Bayonet-Style
Cat. No. Description3003-850N 1 mm smooth ring tips, 8 3/4" (22 cm)
3003-851N 1 mm DIAMOND DUST™ ring tips, 8 3/4" (22 cm)
9999-162N
Cat. No. Description
Forc
eps
3003-154-3N Straight Titanium Micro Suture Tying Forceps, Round Handle Gerald Type Taper, 0.3 mm DIAMOND DUST™ Tips
3003-156-3N Curved Titanium Micro Suture Tying Forceps, Round Handle Gerald Type Taper, 0.3 mm DIAMOND DUST™ Tips
4004-03-3AN Angled Stainless Steel Micro Suture Tying Forceps, Round Handle, 45 Degree Angled, 0.3 mm, DIAMOND DUST™ Tips, 5 1/2" (14 cm)
3003-164N Ring Tips Titanium Micro Forceps, Round Handle, 1 mm DIAMOND DUST™ Ring Tips
Nee
dle
Hol
der 6006-56-3N Curved
Stainless Steel Castroviejo Micro Needle Holder, Round Handle w/o Ratchet, Curved, 0.3 mm Tapered DIAMOND DUST™ Jaws 5 3/4" (14.5 cm)
Scis
sors 7007-140N 45º Angled
Stainless Steel Jacobson Vannas Micro Scissors, Spring Style, Flat Handle, 7" (18 cm)
9999-163N
Cat. No. Description
Forc
eps
3003-158-3N Straight Titanium Micro Suture Tying Forceps, Round Handle Gerald Type Taper, 0.3 mm DIAMOND DUST™ Tips
3003-159-3N Curved Titanium Micro Suture Tying Forceps, Round Handle Gerald Type Taper, 0.3 mm DIAMOND DUST™ Tips
4004-97-3AN Angled Stainless Steel Micro Forceps Round Handle, 45 Degree Angled, 0.3 mm DIAMOND DUST™ Tips
3003-160N Ring Tips Titanium Micro Forceps, Round Handle, 1 mm DIAMOND DUST™ Tips
Nee
dle
Hol
der 3003-177-3N Curved
Titanium Jacobson Micro Needle Holder, Round Handle, w/o Ratchet, 0.3 mm Tapered DIAMOND DUST™ Jaws
Scis
sors 7007-140N 45º Angled
Stainless Steel Jacobson Vannas Micro Scissors, Spring Style, Flat Handle, 7" (18 cm)
1 mm DIAMOND DUST™ Ring Tips
1 mm SmoothRing Tips
3003-850NSCANLAN® ABDULRAUF™ MICRO INSTRUMENTATION SET
Cat. No. 9999-166N Full set, includes the following: 9999-162N, 9999-163N, 9999-164N
(Sets and instruments may be purchased individually)
NE
UR
OS
UR
GIC
AL
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
8.218.20
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
NE
UR
OS
UR
GIC
AL
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
SCANLAN® ABDULRAUF™ Micro InstrumentationTitanium Forceps n Flat Handle n Bayonet-Style
n SCANLAN® Micro Forceps, Lightweight, DIAMOND DUST™ Ring Tips, Round Handle
Cat. No. Description* 4004-250N 1 mm straight tips, 7 1/8" (18.1 cm)
* 4004-251N 1 mm curved tips, 7 1/8" (18.1 cm)
n Dennis Micro Forceps, DIAMOND DUST™ Ring Tips, Round Handle, Counter-Balanced
Cat. No. Description* 4004-216N 1 mm straight tips, 6" (15 cm)
* 4004-217N 1 mm curved tips, 6" (15 cm)
4004-220N 1 mm straight tips, 7 1/4" (18.5 cm)
4004-221N 1 mm curved tips, 7 1/4" (18.5 cm)
StraightDIAMOND DUST™ Ring Tips
StraightDIAMOND DUST™ Ring Tips
4004-220N
4004-250N
Curved PlatformDIAMOND DUST™
Curved PlatformDIAMOND DUST™
9999-164N
Cat. No. DescriptionFo
rcep
s
3003-842N Straight Titanium Micro Forceps Flat Handle Bayonet Style, 0.3 mm DIAMOND DUST™ Tips
3003-840N Curved Titanium Micro Forceps Flat Handle Bayonet Style, Curved Up, 0.3 mm DIAMOND DUST™ Tips
3003-841N Angled Titanium Micro Forceps, Flat Handle Bayonet Style, 45 Degree Angle, 0.3 mm DIAMOND DUST™ Tips
3003-851N Ring Tips Titanium Micro Forceps, Flat Handle, Bayonet Style, 1 mm DIAMOND DUST™ Ring Tips
Nee
dle
Hol
der 3789-14-3N Curved
Stainless Steel Micro Needle Holder, Round Handle Bayonet Style w/o Ratchet, 0.3 mm Tapered DIAMOND DUST™ Jaws, 9" (23 cm)
Scis
sors 3788-02N 45º Angled
Stainless Steel Vannas Micro Scissors, Flat Handle, Bayonet Style, 45-Degree Angled Up Blades
Metal Sterilization Tray
Cat. No. Description**2138-03N SCANLAN® Metal Sterilization Tray,
10" x 10" x 1.5" (25.4 x 25 x 3.8 cm)
**2140-03N SCANLAN® Metal Sterilization Tray, 10" x 15" x 1.5" (25.4 x 38 x 3.8 cm)
**2141-03N SCANLAN® Metal Sterilization Tray, 10" x 15" x 2.63" (25.4 x 38 x 6.6 cm)
NOTE:Bayonet instruments require deeper tray
NE
UR
OS
UR
GIC
AL
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
8.238.22
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
NE
UR
OS
UR
GIC
AL
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
Forceps n Micro Tips / Round Handle n Ring TipsSCANLAN® ABDULRAUF™ Micro Instrumentation
n SCANLAN® Micro Forceps, Lightweight, DIAMOND DUST™ Ring Tips, Round Handle
n SCANLAN® Micro Forceps, Lightweight, DIAMOND DUST™ Tips, Round Handle
Cat. No. Description4004-280N 1 mm straight platform tips, 7 1/8" (18.1 cm)
* 4004-282N 1 mm straight ring tips, 8 1/4" (21 cm)
Cat. No. Description4004-97N Straight tips, 7 1/8" (18.1 cm)
* 4004-97AN Curved tips, 7 1/8" (18.1 cm)
4004-97-3AN 0.3 mm angled, 45° angled, 7 1/4" (18.5 cm)
4004-03-3AN 0.3 mm angled, 45° angled, 5 1/2" (14 cm)
StraightDIAMOND DUST™ Ring Tips
StraightDIAMOND DUST™ Ring Tips
4004-280N
4004-97N
Platform Tips
CurvedDIAMOND DUST™
45º AngledDIAMOND DUST™
Forceps n Micro Tips / Round Handle n Flat Tips
n SCANLAN® Micro Forceps, Lightweight, DIAMOND DUST™ Platform Tips, Round Handle
n Dennis Micro Forceps, DIAMOND DUST™ Platform Tips, Round Handle
Cat. No. Description* 4004-260N Straight tips, 7 1/8" (18.1 cm)
* 4004-261N Curved tips, 7 1/8" (18.1 cm)
Cat. No. Description* 4004-210N Straight tips, 6" (15 cm)
* 4004-212N Curved tips, 6" (15 cm)
4004-95N Straight tips, 7" (18 cm)
* 4004-96N Curved tips, 7" (18 cm)
Platform Tips
Platform Tips
Straight DIAMOND DUST™ Platform Tips
Straight DIAMOND DUST™ Platform Tips
4004-260N
4004-95N
Curved PlatformDIAMOND DUST™
Curved PlatformDIAMOND DUST™
NE
UR
OS
UR
GIC
AL
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
8.258.24
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
NE
UR
OS
UR
GIC
AL
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
Forceps n Micro Tips / Round Handle n Platform TipsForceps n Micro Tips / Round Handle n Ring Tips
Forceps n Gerald n Fine to Medium Tips
n SCANLAN® Micro Forceps, Lightweight, 1 mm Straight DeBakey Tips, Round Handle
n Gerald Forceps, Straight Tips, Flat Handle
Cat. No. Description* 4004-230N 7 1/8" (18.1 cm)
* 4004-232N 8 1/4" (21 cm)
Cat. No. Description* 4004-76N 1 mm serrated tips, 7" (18 cm)
* 4004-77N 1 mm cross-serrated tips, 7 3/4" (19.5 cm)
4004-230N
4004-76N
Straight DeBakeyTips
Straight SerratedGerald Tips
Straight Cross SerratedGerald Tips
n Gerald Forceps, Flat Handle
Cat. No. Description* 4004-238N Straight tips, delicate 1x2 teeth, 7" (18 cm)
* 4004-239N Curved tips, delicate 1x2 teeth, 7" (18 cm)
4004-240N 1 mm straight DeBakey tips, 7" (18 cm)
* 4004-244N 1 mm straight DIAMOND DUST™ ring tips, 7" (18 cm)
* 4004-245N 1 mm curved DIAMOND DUST™ ring tips, 7" (18 cm)
4004-246N 1 mm straight DIAMOND DUST™ tips, 7" (18 cm)
4004-346N 1 mm straight DIAMOND DUST™ platform tips, 7" (18 cm)
Straight Gerald Tips, Delicate 1x2 Teeth
Curved Gerald Tips, Delicate 1x2 Teeth
Straight DeBakey Tips
Straight Gerald Tips DIAMOND DUST™
4004-244N
Straight Gerald RingTipsDIAMOND DUST™
Platform Tips DIAMOND DUST™
Curved Gerald Ring TipsDIAMOND DUST™
n Jewelers Forceps, Sharp Flat Tips, Flat Handle
Cat. No. Description4004-05N 1Straight tips, 4 1/4" (11 cm)
4004-07N Straight DIAMOND DUST™ tips, 4 1/4" (11 cm)
4004-05N
Straight Tips Straight Tips DIAMOND DUST™
NE
UR
OS
UR
GIC
AL
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
8.278.26
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
NE
UR
OS
UR
GIC
AL
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
Forceps n Gerald n Fine to Medium TipsForceps n Micro Tips / Round Handle n DeBakey Tips
n Dennis Micro Forceps, 1 mm Straight DeBakey Tips, Round Handle, Counter-Balanced
n Dennis Micro Forceps, 1 mm Straight DeBakey Tips, Round Handle, Counter-Balanced
Cat. No. Description* 4004-270N 7" (18 cm)
Cat. No. Description* 4004-43N 1 mm straight tips, 7 3/4" (19. 5 cm)
* 4004-45N 2 mm straight tips, 7 3/4" (19.5 cm)
4004-270N
4004-43N
Straight DeBakey Tips
Straight DeBakey Tips
n SCANLAN® DeBakey Needle Pulling Tissue Forceps, Lightweight, Straight Micro Carbon-Inlay Tips, Round Handle (Gold Handle)
n DeBakey Needle Pulling Tissue Forceps, 2 mm Straight Carbon-Inlay Tips, Flat Handle
Cat. No. Description* 4004-266N 2 mm tips, 7 1/4" (18.5 cm)
* 4004-268N Fine tips, 7 1/4" (18.5 cm)
Cat. No. Description* 4004-37N 7 1/2" (19 cm)
4004-268N
4004-37N
Straight DeBakeyCarbon Inlay Tips
Straight DeBakeyCarbon Inlay Tips
Straight Fine DeBakeyCarbon Inlay Tips
NE
UR
OS
UR
GIC
AL
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
8.298.28
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
NE
UR
OS
UR
GIC
AL
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
Forceps n DeBakey n Needle Pulling Tissue ForcepsForceps n DeBakey n Fine to Medium Tips
Forceps n Flat Handle n Bayonette Style
n Micro Forceps, Straight DIAMOND DUST™ Tips, Round Handle, Bayonet-Style
n Micro Forceps, Straight DIAMOND DUST™ Tips, Flat Handle, Bayonet-Style
Cat. No. Description3789-07N 1 mm ring tips, 9" (23 cm)
3789-08N 0.8 mm tips, 9" (23 cm)
* 3789-20N 0.8 mm tips, 10" (25.4 cm)
Cat. No. Description3788-08N 1 mm ring tips, 9" (23 cm)
3788-10N 0.7 mm tips, 9" (23 cm)
3789-07N
3788-08N
StraightDIAMOND DUST™ Tips
StraightDIAMOND DUST™ Tips
StraightDIAMOND DUST™ Ring Tips
StraightDIAMOND DUST™ Ring Tips
n Tumor Grasping Forceps, Concave Serrated Tips, Flat Handle, Bayonet-Style
n DeBakey Forceps, 1.5 mm Straight Tips, Flat Handle, Bayonet-Style
Cat. No. Description3049-90N 3 mm tips, 8 3/4" (22 cm)
3049-92N 5 mm tips, 8 3/4" (22 cm)
Cat. No. Description* 4004-039N 7 3/4" (19.5 cm)
4004-043N 9 1/2" (24 cm)
3049-90N
4004-039N
Concave Serrated Tips
Straight Tips
NE
UR
OS
UR
GIC
AL
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
8.318.30
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
NE
UR
OS
UR
GIC
AL
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
Forceps n Flat Handle n Bayonet StyleForceps n Round Handle n Bayonette Style
n Castroviejo Micro Needle Holders, DIAMOND DUST™ Jaws, Regular Box Lock, Round Handle, 4 3/4" (12 cm)
n Castroviejo Micro Needle Holders, DIAMOND DUST™ Jaws, Regular Box Lock, Round Handle, 5 3/4" (14.5 cm)
Cat. No. Description* 6006-44N Straight jaws, with ratchet
* 6006-45N Straight jaws, without ratchet
* 6006-46N Curved jaws, with ratchet
* 6006-47N Curved jaws, without ratchet
6006-56-3N 0.3 mm, curved jaws, without ratchet, 5 3/4" (14.5 cm)
6006-44N
6006-50N
StraightDIAMOND DUST™ Jaws
StraightDIAMOND DUST™ Jaws
CurvedDIAMOND DUST™ Jaws
CurvedDIAMOND DUST™ Jaws
Recommended suture size: 7-0 and smaller
Cat. No. Description* 6006-50N Straight jaws, with ratchet
* 6006-52N Straight jaws, without ratchet
* 6006-54N Curved jaws, with ratchet
* 6006-56N Curved jaws, without ratchet
Recommended suture size: 5-0 and smaller
Recommended suture size: 8-0 and smaller
n Jacobson Micro Needle Holders, DIAMOND DUST™ Jaws, Regular Box Lock, Round Handle, 6 1/4" (16 cm)
n Jacobson Micro Needle Holders, DIAMOND DUST™ Jaws, Regular Box Lock, Round Handle, 7 1/4" (18.5 cm)
Cat. No. Description6006-59N Straight jaws, with ratchet
* 6006-61N Straight jaws, without ratchet
* 6006-63N Curved jaws, with ratchet
* 6006-65N Curved jaws, without ratchet
Cat. No. Description6006-82N Straight jaws, with ratchet
6006-84N Straight jaws, without ratchet
* 6006-86N Curved jaws, with ratchet
* 6006-88N Curved jaws, without ratchet
6006-59N
6006-82N
StraightDIAMOND DUST™ Jaws
StraightDIAMOND DUST™ Jaws
CurvedDIAMOND DUST™ Jaws
CurvedDIAMOND DUST™ Jaws
Recommended suture size: 5-0 and smaller
Recommended suture size: 5-0 and smaller
NE
UR
OS
UR
GIC
AL
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
8.338.32
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
NE
UR
OS
UR
GIC
AL
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
Needle Holders n Spring Style n Round Handle n Micro JawsNeedle Holders n Spring Style n Round Handle n Micro Jaws
n Micro Needle Holders, DIAMOND DUST™ Jaws, Regular Box Lock, Round Handle, Bayonet-Style, 9" (23 cm)
Cat. No. Description3789-11N Straight jaws, with ratchet
3789-12N Curved up jaws, with ratchet
* 3789-13N Straight jaws, without ratchet
* 3789-14N Curved up jaws, without ratchet
Cat. No. Description3789-14-3N 0.3 mm, curved, without ratchet
3789-12N
StraightDIAMOND DUST™ Jaws
CurvedDIAMOND DUST™ Jaws
Recommended suture size: 5-0 and smaller
Recommended suture size: 8-0 and smaller
n Jacobson Micro Needle Holders, DIAMOND DUST™ Jaws, Regular Box Lock, Round Handle, 8 1/4" (21 cm)
Cat. No. Description* 6006-121N Straight jaws, with ratchet
6006-123N Straight jaws, without ratchet
* 6006-125N Curved jaws, with ratchet
* 6006-127N Curved jaws, without ratchet
6006-121N
StraightDIAMOND DUST™ Jaws
CurvedDIAMOND DUST™ Jaws
Recommended suture size: 7-0 and smaller
NE
UR
OS
UR
GIC
AL
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
8.358.34
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
NE
UR
OS
UR
GIC
AL
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
Needle Holders n Round Handle n Micro Jaws n Bayonet StyleNeedle Holders n Spring Style n Round Handle n Micro Jaws
n Micro Needle Holders, DIAMOND DUST™ Jaws, Regular Box Lock, Flat Handle, Bayonet-Style, 9" (23 cm)
Cat. No. Description3788-12N Straight jaws, with ratchet
3788-13N Curved up jaws, with ratchet
* 3788-14N Straight jaws, without ratchet
* 3788-15N Curved up jaws, without ratchet
3788-12N
StraightDIAMOND DUST™ Jaws
CurvedDIAMOND DUST™ Jaws
Recommended suture size: 5-0 and smaller
9999-162N
Cat. No. Description
Forc
eps
3003-154-3N Straight Titanium Micro Suture Tying Forceps, Round Handle Gerald Type Taper, 0.3 mm DIAMOND DUST™ Tips
3003-156-3N Curved Titanium Micro Suture Tying Forceps, Round Handle Gerald Type Taper, 0.3 mm DIAMOND DUST™ Tips
4004-03-3AN Angled Stainless Steel Micro Suture Tying Forceps, Round Handle, 45 Degree Angled, 0.3 mm, DIAMOND DUST™ Tips, 5 1/2" (14 cm)
3003-164N Ring Tips Titanium Micro Forceps, Round Handle, 1 mm DIAMOND DUST™ Ring Tips
Nee
dle
Hol
der 6006-56-3N Curved
Stainless Steel Castroviejo Micro Needle Holder, Round Handle w/o Ratchet, Curved, 0.3 mm Tapered DIAMOND DUST™ Jaws 5 3/4" (14.5 cm)
Scis
sors 7007-140N 45º Angled
Stainless Steel Jacobson Vannas Micro Scissors, Spring Style, Flat Handle, 7" (18 cm)
9999-163N
Cat. No. Description
Forc
eps
3003-158-3N Straight Titanium Micro Suture Tying Forceps, Round Handle Gerald Type Taper, 0.3 mm DIAMOND DUST™ Tips
3003-159-3N Curved Titanium Micro Suture Tying Forceps, Round Handle Gerald Type Taper, 0.3 mm DIAMOND DUST™ Tips
4004-97-3AN Angled Stainless Steel Micro Forceps Round Handle, 45 Degree Angled, 0.3 mm DIAMOND DUST™ Tips
3003-160N Ring Tips Titanium Micro Forceps, Round Handle, 1 mm DIAMOND DUST™ Tips
Nee
dle
Hol
der 3003-177-3N Curved
Titanium Jacobson Micro Needle Holder, Round Handle, w/o Ratchet, 0.3 mm Tapered DIAMOND DUST™ Jaws
Scis
sors 7007-140N 45º Angled
Stainless Steel Jacobson Vannas Micro Scissors, Spring Style, Flat Handle, 7" (18 cm)
SCANLAN® ABDULRAUF™ EC/IC BYPASS INSTRUMENTATION SET Cat. No. 9999-166N Full set, includes the following:
9999-162N, 9999-163N, 9999-164N (Sets and instruments may be purchased individually)
NE
UR
OS
UR
GIC
AL
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
8.378.36
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
NE
UR
OS
UR
GIC
AL
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
ABDULRAUF™ EC/IC Bypass Instrument setNeedle Holders n Round Handle n Micro Jaws n Bayonet Style
Super Cut™ scissors (indicated with an ‘SC’) have a black platinum handle finish.
9999-164N
Cat. No. DescriptionFo
rcep
s
3003-842N Straight Titanium Micro Forceps Flat Handle Bayonet Style, 0.3 mm DIAMOND DUST™ Tips
3003-840N Curved Titanium Micro Forceps Flat Handle Bayonet Style, Curved Up, 0.3 mm DIAMOND DUST™ Tips
3003-841N Angled Titanium Micro Forceps, Flat Handle Bayonet Style, 45 Degree Angle, 0.3 mm DIAMOND DUST™ Tips
3003-851N Ring Tips Titanium Micro Forceps, Flat Handle, Bayonet Style, 1 mm DIAMOND DUST™ Ring Tips
Nee
dle
Hol
der 3789-14-3N Curved
Stainless Steel Micro Needle Holder, Round Handle Bayonet Style w/o Ratchet, 0.3 mm Tapered DIAMOND DUST™ Jaws, 9" (23 cm)
Scis
sors 3788-02N 45º Angled
Stainless Steel Vannas Micro Scissors, Flat Handle, Bayonet Style, 45-Degree Angled Up Blades
Metal Sterilization Tray
Cat. No. Description**2138-03N SCANLAN® Metal Sterilization Tray,
10" x 10" x 1.5" (25 x 25 x 3.8 cm)
**2140-03N SCANLAN® Metal Sterilization Tray, 10" x 15" x 1.5" (25 x 38 x 3.8 cm)
**2141-03N SCANLAN® Metal Sterilization Tray, 10" x 15" x 2.63" (25 x 38 x 6.6 cm)
NOTE:Bayonet instruments require deeper tray
n Lillehei-Potts Scissors, Ring Handle, Tenotomy Tips
7007-264SCN
Curved Blades Tenotomy Tips
Super Cut™ Cat. No. Description7007-264SCN Curved blades, 7" (18 cm)
NE
UR
OS
UR
GIC
AL
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
8.398.38
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
NE
UR
OS
UR
GIC
AL
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
Scissors n Ring Handle n Tenotomy Tips n Lillehei-PottsABDULRAUF™ EC/IC Bypass Instrument set
Scissors n Carotid n Ring Handle n DeBakey
Super Cut™ scissors (indicated with an ‘SC’) have a black platinum handle finish.
Super Cut™ scissors (indicated with an ‘SC’) have a black platinum handle finish.
Super Cut™ Cat. No. Description7007-252SCN 45° angled fine blades
7007-254SCN 60° angled fine blades
* 7007-256SCN 90° angled fine blades
n Diethrich-Potts Scissors, Ring Handle, Angled Blades, 7″ (18 cm)
45º Angled Blades
60º Angled Blades
90º Angled Blades
Instrument blades are shown approximate size
7007-252SCN
7007-252N Fine Blades
45º Angled Blades
7007-320SCN
Super Cut™ Cat. No. Description7007-320SCN 6 1/4" (16 cm)
n DeBakey Scissors, Ring Handle, 45° Angled Blades, Blunt Tips
n Lillehei-Potts Scissors, Ring Handle, Curved Blades, 7″ (18 cm)
7007-266SCN
Super Cut™ Cat. No. Description
* 7007-266SCN Sharp tips, 7" (18 cm)
7007-268SCN Blunt tips, 7" (18 cm)
Curved BladesSharp Tips
Curved BladesBlunt Tips
NE
UR
OS
UR
GIC
AL
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
8.418.40
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
NE
UR
OS
UR
GIC
AL
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
Scissors n Carotid n Ring Handle n Diethrich-PottsScissors n Ring Handle n Lillehei-Potts
Scissors n Ring Handle n Stevens Tenotomy
Super Cut™ scissors (indicated with an ‘SC’) have a black platinum handle finish.
Cat. No. Description3789-01N Straight blades, 8 1/4" (21 cm)
3789-02N Curved up blades, 8 1/4"(21 cm)
3789-03N Straight blades, 9" (23 cm)
3789-04N Curved up blades, 9" (23 cm)
Cat. No. Description3789-16N Straight blades, 10" (25.4 cm)
3789-17N Curved up blades, 10" (25.4 cm)
n Micro Scissors, Round Handle, Bayonet-Style
n Micro Scissors, Round Handle, Bayonet-Style
Straight Blades
Straight Blades
Curved Up Blades
Curved Up Blades
3789-01N
3789-16N
Super Cut™ Cat. No. Description7007-216SCN Curved blades, 6" (15 cm)
7007-218SCN Curved blades, 7" (18 cm)
7007-218-3SCN Curved blades, 2.5 mm blunt tips, 7" (18 cm)
n Metzenbaum Scissors, Ring Handle, Tenotomy Tips
Curved Blades Tenotomy Tips
7007-218-3SCN
n Stevens Tenotomy Scissors, Ring Handle
Curved Blades Tenotomy Tips
7007-211SCN
Super Cut™ Cat. No. Description7007-313SCN Curved blades, 6" (15 cm)
7007-211SCN Curved blades, 7" (18 cm)
* 7007-315SCN Curved blades, 8" (20 cm)
NE
UR
OS
UR
GIC
AL
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
8.438.42
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
NE
UR
OS
UR
GIC
AL
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
Scissors n Round Handle n Micro n Bayonet-StyleScissors n Ring Handle n Metzenbaum
Scissors n Spring Style n Flat Handle n Micro
Cat. No. Description7007-128N Straight blades, sharp tips, 7″ (18 cm)
7007-132N Curved blades, blunt tips, 7″ (18 cm)
7007-130N Curved blades, sharp tips, 7″ (18 cm)
* 7007-134N Curved blades, blunt tips, 7″ (18 cm)
n Jacobson Micro Scissors, Round Handle
Straight Blades Sharp Tips
Straight Blades Blunt Tips
Curved Blades Sharp Tips
Curved Blades Blunt Tips
7007-128N
Instrument blades are shown approximate size
7007-128N
Cat. No. Description7007-140N 7" (18 cm)
n Jacobson Vannas Micro Scissors, Flat Handle, 45° Angled on Flat Micro Fine Blades
45° Angled on Flat Blades
Instrument blades are shown approximate size
7007-140N
7007-140N
Cat. No. Description3788-01N Straight blades, 8 1/4" (21 cm)
3788-04N Straight blades, 9" (23 cm)
3788-06N Straight blades, fine tenotomy tips, 9" (23 cm)
3788-05N Curved up blades, 9" (23 cm)
3788-27N Curved up blades, 8 3/4" (22 cm)
3788-29N Curved down blades, 8 3/4" (22 cm)
Cat. No. Description3788-02N Vannas 45° angled on flat micro fine blades,
8 3/4" (22 cm)
n Micro Scissors, Flat Handle, Bayonet-Style
n Micro Scissors, Flat Handle, Bayonet-Style
n Micro Scissors, Flat Handle, Bayonet-Style
Straight Blades
Vannas 45° Angled on FlatMicro Fine Blades
Straight Blades, Tenotomy Tips
Curved Up Blades
Curved Down Blades
3788-27N
3788-02N
Cat. No. Description7007-120N Straight blades, sharp tips, 7" (18 cm)
7007-124N Curved blades, sharp tips, 7" (18 cm)
n Jacobson Micro Scissors, Flat Handle
Straight Blades, Sharp Tips
Curved Blades, Sharp Tips
7007-120N
NE
UR
OS
UR
GIC
AL
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
8.458.44
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
NE
UR
OS
UR
GIC
AL
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
Scissors n Spring Style n Round Handle n MicroScissors n Flat Handle n Micro n Bayonet-Style
Cat. No. Description7007-540N Flat Handle, 25° angled blades, 6 1/4″ (16 cm)
7007-542N Flat Handle, 45° angled blades, 6 1/4″ (16 cm)
7007-544N Flat Handle, 60° angled blades, 6 1/4″ (16 cm)
7007-546N Flat Handle, 90° angled blades, 6 1/8″ (15.5 cm)
7007-548N Flat Handle, V-neck, 125° angled blades, 6 1/8″ (15.5 cm)
7007-590N Round Handle, 25° angled blades, 6 3/4" (17 cm)
7007-592N Round Handle, 45° angled blades, 6 3/4" (17 cm)
7007-594N Round Handle, 60° angled blades, 6 3/4" (17 cm)
7007-596N Round Handle, 90° angled blades, 6 1/2" (16.5 cm)
7007-598N Round Handle, V-neck, 125° angled blades, 6 1/2" (16.5 cm)
Cat. No. Description7007-538N Straight sharp nano blades, 6" (15 cm)
7007-539N Curved sharp nano blades, 6" (15 cm)
Cat. No. Description7007-508N Straight sharp nano blades, 8" (20 cm)
7007-509N Curved sharp nano blades, 8" (20 cm)
7007-510N 25° angled nano blades, 8" (20 cm)
7007-511N 45° angled nano blades, 8" (20 cm)
Cat. No. Description7007-401N Straight sharp nano blades, 4 1/8" (10.5 cm)
7007-402N Curved sharp nano blades, 4 1/8" (10.5 cm)
7007-403N 25° angled nano blades, 4 1/8" (10.5 cm)
7007-404N 45° angled nano blades, 4 1/8" (10.5 cm)
n SCANLAN® Premier™ Jacobson Micro Scissors, Angled Nano Blades
n SCANLAN® Premier™ Jacobson Micro Scissors, Spring Style, Flat Handle
n SCANLAN® Premier™ Jacobson Micro Scissors, Flat Handle, Bayonet Style
45º Angled Blades
60º Angled Blades
90º Angled Blades
25º Angled Blades
V-Neck 125º Angled Blades
7007-542N 7007-539N
7007-508NInstrument blades are shown approximate size
Instrument is shownapproximate size
Instrument is shownapproximate size
7007-548N
n SCANLAN® Premier™ Castroviejo Micro Scissors, Spring Style, Flat Handle
7007-401N
45º Angled Blades
25º Angled Blades
NE
UR
OS
UR
GIC
AL
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
8.478.46
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
NE
UR
OS
UR
GIC
AL
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
Scissors n Spring Style n Micro Scissors n Spring Style n Micro
Cat. No. Description9009-940N 4 1/2" (11.5 cm) rotatable suction tip set
9009-960N 5 1/4" (13.5 cm) rotatable suction tip set
9009-980N 7 7/8" (19.8 cm) rotatable suction tip set
9009-950N 4 1/2" (11.5 cm) non-rotatable suction tip set
9009-970N 5 1/4" (13.5 cm) non-rotatable suction tip set
9009-990N 7 7/8" (19.8 cm) non-rotatable suction tip set
n SUNDT™ Graduated Suction Systems (Sets)
3 Fr. 4 Fr. 5 Fr. 6 Fr. 7 Fr. 9 Fr. 11 Fr.
And includes a universal suction handle – 3" (7.5 cm) and sterilization / storage case
Each set has seven suction tips, diameters:
4 1/2" (11.5 cm)
5 1/4" (13.5 cm)
7 7/8" (19.8 cm)
9009-930N
Cat. No. Description* 9009-928N Brush Set, pack of ten (for 9009-940N, -960N)
* 9009-929N Brush Set, pack of ten (for 9009-980N)
9009-930N Universal Suction Handle (3" / 7.5 cm), fits all sets and tip lengths
** 9009-934N SUNDT™ Sterilization / Storage Tray, 6" x 10" x 1.5" (15.2 x 25.4 x 3.8 cm), fits all tips / lengths and handle
Cat. No. DescriptionRotatable
9009-941N 3 French
9009-942N 4 French
9009-943N 5 French
9009-944N 6 French
9009-945N 7 French
9009-947N 9 French
9009-949N 11 French
Cat. No. DescriptionRotatable
9009-961N 3 French
9009-962N 4 French
9009-963N 5 French
9009-964N 6 French
9009-965N 7 French
9009-967N 9 French
9009-969N 11 French
Cat. No. DescriptionRotatable
9009-981N 3 French
9009-982N 4 French
9009-983N 5 French
9009-984N 6 French
9009-985N 7 French
9009-987N 9 French
9009-989N 11 French
Cat. No. DescriptionNon-Rotatable
9009-951N 3 French
9009-952N 4 French
9009-953N 5 French
9009-954N 6 French
9009-955N 7 French
9009-957N 9 French
9009-959N 11 French
Cat. No. DescriptionNon-Rotatable
9009-971N 3 French
9009-972N 4 French
9009-973N 5 French
9009-974N 6 French
9009-975N 7 French
9009-977N 9 French
9009-979N 11 French
Cat. No. DescriptionNon-Rotatable
9009-991N 3 French
9009-992N 4 French
9009-993N 5 French
9009-994N 6 French
9009-995N 7 French
9009-997N 9 French
9009-999N 11 French
n SUNDT™ Graduated Suction Parts
n 4 1/2" (11.5 cm) Tips for SUNDT™ Graduated Suction Systems
n 5 1/4" (13.5 cm) Tips for SUNDT™ Graduated Suction Systems
n 7 7/8" (19.8 cm) Tips for SUNDT™ Graduated Suction Systems
NE
UR
OS
UR
GIC
AL
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
8.498.48
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
NE
UR
OS
UR
GIC
AL
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
SUNDT™ Graduated Suction Systems SUNDT™ Graduated Suction Systems
n SUPER CUT™ Scissors
n Forceps
n Needle Holder
SCANLAN® Loftus™ Carotid Endarterectomy Set – *Cat. No. 9999-181N Total set includes the following:
Cat. No. Description7007-211SCN Stevens tenotomy scissors, ring handle, curved blades, 7" (18 cm)
7007-218-3SCN Metzenbaum scissors, ring handle, curved blades, 2.5 mm blunt tips, 7" (18 cm)
7007-254SCN Diethrich-Potts scissors, ring handle, angled blades, 7″ (18 cm), 60° angled fine blades
7007-320SCN DeBakey scissors, ring handle, 45° angled blades, blunt tips, 6 1/4" (16 cm)
Cat. No. Description3003-04N DeBakey dissecting forceps, straight tips, flat handle, 2 mm tips, 7 3/4″ (19.5 cm)
3003-05N DeBakey dissecting forceps, straight tips, flat handle, 1 mm tips, 7 3/4″ (19.5 cm)
3003-158-8N Micro forceps, DIAMOND DUST™ platform tips, round handle, straight tips, 8 1/4″ (21 cm)
3003-720N Dennis micro forceps, 1 mm straight DIAMOND DUST™ ring tips, round handle, counterbalanced 7″ (18 cm)
Cat. No. Description3003-234-1N Micro needle holders, DIAMOND DUST™ jaws, flat handle fine jaws, with ratchet, 8 1/2″ (21.5 cm)
straight jaws - streamline box lock, recommended suture size: 5-0 and smaller
SCANLAN® Loftus™ Carotid Endarterectomy Set developed in cooperation with Christopher M. Loftus, M.D.
SCANLAN® Loftus™ Carotid Endarterectomy Set Cat. No. 9999-181N Full set, includes (but is not limited to) the following:
n Storage/Sterilization Tray
n Vascu-Statt Applier for Bulldog Clamps
n Single-Use Products (Set includes one sample of the following.)
n SCANLAN® Loftus™ Titanium Bulldog Shunt Clamps (Set includes one sample of the following. Please indicate choice when placing order.)
n Clamps
n Dissectors (Set includes on each of the following.)
Cat. No. Description** 2081-23N Plastic sterilization tray, plastic clasps, with additional 1/2 tray insert and extra silicone mat
15″ x 10″ x 1.5″ (38 x 25.4 cm x 3.8 cm)
** 2141-03N Aluminum sterilization tray, detachable lid, silver-gray color, silicone insert across full width of base, additional tray insert, 10″ x 15″ x 2.6″ (25.4 x 38 x 6.6 cm)
Cat. No. Description1001-506N Straight, 8 1/2″ (21.5 cm)
Cat. No. Description1001-76N SURG-I-LOOP® Silicone Loops, red Maxi
1001-550N VASCU-STATT® Plus, Midi, straight
Cat. No. Description* 9009-144N 1 mm and 2 mm, 7 1/8" (18.1 cm)
* 9009-146N 3 mm and 4 mm, 7 1/8" (18.1 cm)
Cat. No. Description2002-235N SCANLAN® baby vascular clamps, Cooley jaws, 45° angled jaws, 5 3/4″ (14.6 cm)
3003-614N Micro clamps, angled DeBakey jaws, 60° angled jaws, 23 mm jaw length, 4 1/8″ (10.5 cm)
4377-08N DeBakey Cooley forceps, Carmalt Jaws with cross hatch tips, right angled jaws, 7 1/2" (19 cm)
*9009-148N Ochsner forceps, 90° angled very fine serrated jaws, 4 1/2″ (11.5 cm)
Cat. No. Description
* 4385-40N 10° angled, 10 Fr., 3 3/4" (9.5 cm) 10 Fr.
* 4385-42N 25° angled, 10 Fr., 3 3/4" (9.5 cm) 10 Fr.
* 4385-44N 45° angled, 10 Fr., 3 3/4" (9.5 cm) 10 Fr.
* 4385-46N 60° angled, 10 Fr., 3 3/4" (9.5 cm) 10 Fr.
* 4384-40N 10° angled, 12 Fr., 3 3/4" (9.5 cm) 12 Fr.
* 4384-42N 25° angled, 12 Fr., 3 3/4" (9.5 cm) 12 Fr.
* 4384-44N 45° angled, 12 Fr., 3 3/4" (9.5 cm) 12 Fr.
* 4384-46N 60° angled, 12 Fr., 3 3/4" (9.5 cm) 12 Fr.
* 4383-40N 10° angled, 14 Fr., 3 3/4" (9.5 cm) 14 Fr.
* 4383-42N 25° angled, 14 Fr., 3 3/4" (9.5 cm) 14 Fr.
* 4383-44N 45° angled, 14 Fr., 3 3/4" (9.5 cm) 14 Fr.
* 4383-46N 60° angled, 14 Fr., 3 3/4" (9.5 cm) 14 Fr.
NE
UR
OS
UR
GIC
AL
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
8.518.50
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
NE
UR
OS
UR
GIC
AL
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
SCANLAN® Loftus™ Carotid Endarterectomy Set SCANLAN® Loftus™ Carotid Endarterectomy Set
Loftus™ Carotid n Scissors n Ring Handle n DeBakey
Super Cut™ Cat. No. Description7007-252SCN 45° angled fine blades
7007-254SCN 60° angled fine blades
* 7007-256SCN 90° angled fine blades
n Diethrich-Potts Scissors, Ring Handle, Angled Blades, 7″ (18 cm)
45º Angled Blades
60º Angled Blades
Instrument blades are shown approximate size
7007-252SCN
7007-252SCN Fine Blades
45º Angled Blades
7007-320SCN
Super Cut™ Cat. No. Description7007-320SCN 6 1/4" (16 cm)
n DeBakey Scissors, Ring Handle, 45° Angled Blades, Blunt Tips
90º Angled Blades
Super Cut™ scissors (indicated with an ‘SC’) have a black platinum handle finish.
n SCANLAN® Loftus™ Titanium Bulldog Shunt Clamps (Internal carotid artery use)
4385-42N
Cat. No. Description
* 4385-40N 10° angled, 10 Fr., 3 3/4" (9.5 cm)
* 4385-42N 25° angled, 10 Fr., 3 3/4" (9.5 cm)
* 4385-44N 45° angled, 10 Fr., 3 3/4" (9.5 cm)
* 4385-46N 60° angled, 10 Fr., 3 3/4" (9.5 cm)
* 4384-40N 10° angled, 12 Fr., 3 3/4" (9.5 cm)
* 4384-42N 25° angled, 12 Fr., 3 3/4" (9.5 cm)
* 4384-44N 45° angled, 12 Fr., 3 3/4" (9.5 cm)
* 4384-46N 60° angled, 12 Fr., 3 3/4" (9.5 cm)
* 4383-40N 10° angled, 14 Fr., 3 3/4" (9.5 cm)
* 4383-42N 25° angled, 14 Fr., 3 3/4" (9.5 cm)
* 4383-44N 45° angled, 14 Fr., 3 3/4" (9.5 cm)
* 4383-46N 60° angled, 14 Fr., 3 3/4" (9.5 cm)
60º 45º 25º 10º
14 Fr.
12 Fr.
10 Fr.
NE
UR
OS
UR
GIC
AL
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
8.538.52
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
NE
UR
OS
UR
GIC
AL
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
Loftus™ Carotid n Scissors n Ring Handle n Diethrich-Potts Loftus™ Carotid n Shunt Clamps
3003-630N
Cat. No. Description3003-628N Left angled jaws, 23 mm jaw length, 4 1/4″ (11 cm)
3003-630N Right angled jaws, 23 mm jaw length, 4 1/4″ (11 cm)
n Micro Kitzmiller Clamps, Angled DeBakey Jaws
Instrument is shownapproximate size
Left Angled Jaws23 mm Jaw Length
(3003-628N)
Right Angled Jaws23 mm Jaw Length
(3003-630N)
3003-614N
n Micro Clamps, Angled DeBakey Jaws
Cat. No. Description3003-614N 60° angled jaws, 23 mm jaw length, 4 1/8″ (10.5 cm)
Instrument is shownapproximate size
60° Angled Jaws 23 mm Jaw Length
(3003-614N)
n SCANLAN® Baby Vascular Clamps, Cooley Jaws
Cat. No. Description2002-235N 45° angled jaws, 5 1/4″ (13.5 cm)
2002-235N
Instrument is shownapproximate size
Instrument jaws are shownapproximate size
45º Cooley Jaws (2002-235N)
NE
UR
OS
UR
GIC
AL
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
8.558.54
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
NE
UR
OS
UR
GIC
AL
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
Loftus™ Carotid n Titanium Clamps n Baby Vascular Loftus™ Carotid Clamps n Micro Vascular n Cooley
Loftus™ Carotid n DeBakey Cooley Forceps
Cat. No. Description4377-08N Right angled jaws, 7 1/2" (19 cm)
n DeBakey Cooley Forceps, Carmalt Jaws with Cross Hatch Tips
4377-08N
Cat. No. Description* 9009-148N 4 1/2" (11.5 cm)
n Ochsner Forceps, 90° Angled Very Fine Serrated Jaws
90° Angled Very Fine Serrated Jaws
9009-148N
Cat. No. Description* 9009-144N 1 mm and 2 mm, 7 1/8" (18.1 cm)
* 9009-146N 3 mm and 4 mm, 7 1/8" (18.1 cm)
n Loftus™ Carotid Dissectors
9009-144N
NE
UR
OS
UR
GIC
AL
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
8.578.56
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
NE
UR
OS
UR
GIC
AL
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
Loftus™ Carotid n Ochsner Forceps Loftus™ Carotid n Dissectors
n SCANLAN® Heifetz™ Temporary Occlusion Clip Appliers
n SCANLAN® Heifetz™ Temporary Occlusion Clips, 8 mm jaw length, 1.75 mm jaw width
n SCANLAN® Heifetz™ Temporary Occlusion Clips, 12 mm jaw length, 2.25 mm jaw width
Cat. No. Description* 3795-01N Applier, straight, 7 1/4″ (18.5 cm)
(for all SCANLAN® Heifetz™ clips)
* 3795-01AN Applier, angled, 7 1/4″ (18.5 cm) (for all SCANLAN® Heifetz™ clips)
Cat. No. Description** 3795-04N Straight, light pressure, black
** 3795-14N Straight, firm pressure, gold
** 3795-06N Angled on edge, light pressure, black
** 3795-16N Angled on edge, firm pressure, gold
** 3795-08N Curved, light pressure, black
** 3795-18N Curved, firm pressure, gold
Cat. No. Description** 3795-20N Straight, light pressure, black
** 3795-22N Curved, light pressure, black
** 3795-24N Straight, firm pressure, gold
** 3795-28N Curved, firm pressure, gold
8 mm Straight 3795-04N
12 mm Straight 3795-24N
12 mm Curved 3795-28N
8 mm Angled 3795-06N
8 mm Curved 3795-08N
Occlusion tips are shown approximate size
Occlusion tips are shown approximate size
All SCANLAN® Heifetz™ Temporary Occlusion Clips are re-usable and steam, flash, ETO and plasma sterilization compatible.
3795-01N
n Yasargil-type Applying Forceps
n SCANLAN® Yasargil-type Temporary Occlusion Clips, Very Small Pattern
Cat. No. Description* 3786-40N 8 1/2" (21.5 cm)
(For temporary occlusion clips 3786-30N, -31N, and -32N)
Cat. No. Description
* 3786-30N Straight, 4 mm
* 3786-31N Straight, 6 mm
* 3786-32N Curved, 7 mm
All Yasargil-type Temporary Occlusion Clips are re-usable and steam, flash, ETO and plasma sterilization compatible.
3786-40N
Straight, 4 mm 3786-30N
Straight, 6 mm 3786-31N
Curved, 7 mm 3786-32NN
EU
RO
SU
RG
ICA
L
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
8.598.58
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
NE
UR
OS
UR
GIC
AL
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
Temporary Occlusion n SCANLAN® Heifetz™ Clips Temporary Occlusion n Yasargil-type Clips
n Yasargil-type Applying Forceps
n SCANLAN® Yasargil-type Temporary Occlusion Clips
Cat. No. Description* 3786-28N 7 1/8″ (18.1 cm)
(For temporary occlusion clips 3786-22N, -23N, -24N, and -25N)
Cat. No. Description
** 3786-21N Straight, 7 mm
** 3786-22N Straight, 9 mm
** 3786-23N Angled, 9 mm
** 3786-24N Slightly curved, 9 mm
** 3786-25N Strongly curved, 9 mm
All Yasargil-type Temporary Occlusion Clips are re-usable and steam, flash, ETO and plasma sterilization compatible.
3786-28N
Straight, 9 mm3786-22N
Angled, 9 mm 3786-23N
Slightly Curved, 9 mm
3786-24N
Strongly Curved, 9 mm
3786-25N
Occlusion tips are shown approximate size
Straight, 7 mm 3786-21N
Cat. No. Description* 9009-100N With ligature guide, 7" (18 cm)
9009-104N With ligature guide, 7 3/4" (19.7 cm)
9009-106N With ligature guide, 9 1/2" (24 cm)
9009-110N Without ligature guide, 9 1/2" (24 cm)
Cat. No. Description* 9009-144N 1 mm and 2 mm tips, 7 1/8" (18.1 cm)
* 9009-146N 3 mm and 4 mm tips, 7 1/8" (18.1 cm)
n Olivecrona Double-Ended Dissector
n Ochsner Double-Ended Dissectors
9009-106 N
9009-144N
NE
UR
OS
UR
GIC
AL
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
8.618.60
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
NE
UR
OS
UR
GIC
AL
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
Temorary Occlusion n Yasargil-type Clips Micro Dissectors n Knives n Ochsner
Cat. No. Description3784-451N 7 1/2" (19 cm)
Cat. No. Description* 3784-44N Curved upwards, 7 1/4" (18.5 cm)
3784-45N Curved downwards, 7 1/4" (18.5 cm)
Cat. No. Description3784-08N 7 1/4" (18.5 cm)
Cat. No. Description** 3784-80N Tray with instruments, 9" x 5" x 2" (23 cm x 12.7 cm x 5 cm) (instruments not included)
n Jacobson Retrograde Knives / Dissectors with Ball Tip, Bayonet Handle
n Yasargil Micro Arachnoidal Knives, Bayonet-Style
n Jacobson Micro Vessel Knife
n Dissector Instrument Tray
3784-451N
3784-45N
3784-80N
Cat. No. Description3784-12N Small, 7 1/4" (18.5 cm)
* 3784-11N Large, 7 1/4" (18.5 cm)
3784-09N Angled, 7 1/4" (18.5 cm)
Cat. No. Description3784-43N 7 1/4" (18.5 cm)
Cat. No. Description3784-40N Curved downwards, bayonet-style, 7 1/4" (18.5 cm)
* 3784-41N Curved upwards, bayonet-style, 7 1/4" (18.5 cm)
3784-42N Slightly curved, bayonet-style, 7 1/4" (18.5 cm)
* 3784-13N Strongly curved, bayonet-style, 7 1/4" (18.5 cm)
3784-10N Round handle, painted, 7 1/4" (18.5 cm)
Cat. No. Description3781-16N Blunt 3 mm curved tip, length 8 3/4" (22 cm)
3781-10N Blunt 6 mm tip, length 7 1/4" (18.5 cm)
n Yasargil Angled Micro Raspatories
n Yasargil Micro Curette, Bayonet-Style
n Yasargil Micro Raspatories
n PennfieldDissector
3784-12N
3784-43N
3784-40N
NE
UR
OS
UR
GIC
AL
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
8.638.62
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
NE
UR
OS
UR
GIC
AL
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
Micro Dissectors n Knives n Jacobson n Yasargil Micro Dissectors n Raspatories n Curette
Cat. No. Description3784-32N Small, 7 1/4" (18.5 cm)
* 3784-33N Large, 7 1/4" (18.5 cm)
Cat. No. Description* 3003-800N 10" (25.4 cm)
Cat. No. Description3784-14N Angled, 7 1/4" (18.5 cm)
3784-15N Straight, 2-probes, 7 1/4" (18.5 cm)
Cat. No. Description3784-30N Pointed small, 7 1/4" (18.5 cm)
3784-31N Pointed large, 7 1/4" (18.5 cm)
n Krayenbuhl Micro Nerve and Vessel Hooks
n Titanium Probe
n Jacobson Micro Probes
n Krayenbuhl Probes
3784-32N
3784-14N
3784-31N
NE
UR
OS
UR
GIC
AL
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ents
-by-
spec
ialty
/neu
rosu
rgic
al/
8.64
* Custom made at time of order. Firm sale. ** Firm saleCustom modifications available upon request
For a complete listing of models visit... www.scanlaninternational.com
Micro Dissectors n Micro Hooks / Probes
INS
TRU
ME
NT
CA
RE
PR
OD
UC
TSht
tp://
ww
w.s
canl
anin
tern
atio
nal.c
om/in
stru
men
t-car
e/
COLOR CODING SURG-I-BAND® Color Coding System Carousel .....................................................................9.1 Dispenser ...................................................................9.1 Remover .....................................................................9.1 Designs ......................................................................9.2 Labels .........................................................................9.3 Data Matrix .................................................................9.4
EASY-TAG™ Tracking System EASY-TAG™ ..................................................................... 9.5 EASY-TAG™ with Custom Printing ....................................9.5
INSTRUMENT TIP PROTECTORS TIP GUARD™ Instrument Protectors Endoscopic .................................................................9.6 Original .......................................................................9.7 Vented ........................................................................9.7
Use your Smart Phone and QR Reader software to photograph the code below which will take
you to this section on the Scanlan Website
DEMAGNETIZER ...................................................................... 9.8
TRAVELER™ Autoclavable Pouch .......................................... 9.8
STERILIZATION TRAYS Metal .................................................................................. 9.9 Plastic .............................................................................. 9.11
INS
TRU
ME
NT
CA
RE
PR
OD
UC
TSht
tp://
ww
w.s
canl
anin
tern
atio
nal.c
om/in
stru
men
t-car
e/
1
2
3
4
5
6
7
8
9
10
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
INCHES CMSCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018
©2012 Scanlan International, Inc.
9.1
INS
TRU
ME
NT
CA
RE
PR
OD
UC
TSht
tp://
ww
w.s
canl
anin
tern
atio
nal.c
om/in
stru
men
t-car
e/
Cat. No. Description
1001-59 Carousel Only
1001-61 Carousel with 12 Dispensers (Does not include Surg-I-Band® spools or Tip-Guard™)
Cat. No. Description
1001-49 Surg-I-Band® Remover
Cat. No. Description
1001-60 Surg-I-Band® Dispenser (Does not include Surg-I-Band® spools)
1/8″ Narrow Cat. No.
1/4″ Original Cat. No. Description
1001-630 1001-64 Red
1001-631 1001-65 Yellow
1001-632 1001-66 Orange
1001-633 1001-67 Blue
1001-634 1001-68 Green
1001-635 1001-69 Brown
1001-636 1001-70 White
1/8″ Narrow Cat. No.
1/4″ Original Cat. No. Description
1001-637 1001-71 Black
1001-638 1001-94 Glo-Orange
1001-639 1001-95 Purple
1001-640 1001-96 Lime Green
1001-641 1001-97 Grey
1001-642 1001-98 Pink
1001-643 1001-99 Light Blue
• Efficient – provides fast, easy application of Surg-I-Band® color coding
• Excellent organization – holds 12 Surg-I-Band® dispensers
• Rotating top – provides easy access to each color
• Storage – conveniently holds Scanlan® Tip Guard™ instrument protectors
• Easy to use – Surg-I-Band® spools snap on securely and can be removed quickly
• Saves time – allows quick removal of Surg-I-Band® color coding
• Safe – eliminates use of razors or other sharp instruments that may damage the surface of instruments or cause injury to personnel
• Reusable – removes hundreds of bands
U.S. Patent Number 5,864,953
SURG-I-BAND® Dispenser SURG-I-BAND® Remover
SURG-I-BAND® Carousel
Original Surg-I-Band® (1/4″) and narrow Surg-I-Band® (1/8″) color coding, available in 14 bright colors, offers a multitude of color coding combinations to identify instruments by surgeon, set, specialty and suite. In addition, Surg-I-Band® color coding is long lasting – providing greater value by saving time and labor. This high quality product has been independently tested and confirmed to be completely gas and steam sterilizable. Latex-safe.
• Easy to use – Surg-I-Band® color coding spools snap on securely and can be removed quickly
• Precise cut – Dispenser eliminates the need for awkward scissors or blades when using Surg-I-Band® color coding
• Protective cover - guards against damage to blade and color coding
• Compact – provides a small, lightweight design
• Reusable – ensuring greater economy
Surg-I-Band®
Use your Smart Phone and QR Reader software
to photograph the code below to view a
Video Demonstration of SURG-I-BAND®
INSTR
UMENTCAREPRODUCTS
SCANLAN INTERNATIONAL, Inc.•OneScanlanPlaza•SaintPaul,Minnesota55107•U.S.A.•800-328-9458•651-298-0997•FAX651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ent-c
are/
9.2
SCANLAN INTERNATIONAL, Inc.•OneScanlanPlaza•SaintPaul,Minnesota55107•U.S.A.•800-328-9458•651-298-0997•FAX651-298-0018©2012 Scanlan International, Inc.
9.3
INSTR
UMENTCAREPRODUCTS
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ent-c
are/
Surg-I-Band® Color Coding Labels
Cat. No. Description
1001-800 Red
1001-801 Yellow
1001-802 Orange
1001-803 Blue
1001-804 Green
1001-805 Brown
1001-806 White
1001-807 Black
1001-808 Glo-Orange
1001-809 Purple
1001-810 Lime Green
1001-811 Grey
1001-812 Pink
1001-813 Light Blue
Cat. No. Description
1001-814 Red/White
1001-815 Yellow/White
1001-816 Green/White
1001-817 Black/White
Cat. No. Description
1001-818 Red/White
1001-819 Yellow/White
1001-820 Green/White
1001-821 Black/White
Cat. No. Description
1001-822 Red/White
1001-823 Yellow/White
1001-824 Green/White
1001-825 Black/White
• Three patterns – polka-dots, checkered and Jammie-Stripes™
• 14 solid colors• Durable–resistanttoflaking,chipping,peelingandcrackingthroughmultiple
sterilization cycles• Sterilizable–Testedforsteam,gasandflash(immediateuse)sterilization• Pre-cut label sheet(81/2″x11″)–1/4″width,374″persheet •230ea.of1.0″ •40ea.of1.5″ •12ea.of2.0″ •12ea.of5.0″
• Latex-safe
Solid Labels Polka-Dot Labels
Checkered Labels
Jammie-Stripes Labels
Surg-I-Band® Designs On Spools
Red Designs
Pink Designs
Black Designs
Green Designs
Blue Designs
Purple Designs
• 40 designs – numbers, symbols and abbreviations• Multiple colors • Durable–resistanttoflaking,chipping,peeling
and cracking through multiple sterilization cycles• Sterilizable – Tested for steam, gas and flash(immediateuse)sterilization
• 1/4″ Width• Latex-safe
Cat. No. Description
1001-1000 Zero
1001-1001 One
1001-1002 Two
1001-1003 Three
1001-1004 Four
1001-1005 Five
1001-1006 Six
1001-1007 Seven
1001-1008 Eight
1001-1009 Nine
1001-1010 Hearts
1001-1011 Bones
1001-1012 Crosses
1001-1013 Eyes
Cat. No. Description
1001-1014 Zero
1001-1015 One
1001-1016 Two
1001-1017 Three
1001-1018 Four
1001-1019 Five
1001-1020 Six
1001-1021 Seven
1001-1022 Eight
1001-1023 Nine
1001-1024 Hearts
1001-1025 Bones
1001-1026 Crosses
1001-1027 Eyes
Cat. No. Description
1001-1028 OB
1001-1029 EYE
1001-1030 GEN
1001-1031 GYN
1001-1032 BAR
1001-1033 URO
1001-1034 NEU
1001-1035 L&D
1001-1036 Feet
1001-1037 Baby Bottle
1001-1038 Bones
1001-1039 SmileyFaces
1001-1040 Hearts
1001-1041 Hands
Cat. No. Description
1001-1042 OB
1001-1043 EYE
1001-1044 GEN
1001-1045 GYN
1001-1046 BAR
1001-1047 URO
1001-1048 NEU
1001-1049 L&D
1001-1050 Feet
1001-1051 Baby Bottle
1001-1052 Bones
1001-1053 SmileyFaces
1001-1054 Hearts
1001-1055 Hands
Cat. No. Description
1001-1056 ETO
1001-1057 ENDO
1001-1058 GI
1001-1059 CV
1001-1060 ER
1001-1061 ASC
1001-1062 CCU
1001-1063 DEN
1001-1064 ENT
1001-1065 ICU
1001-1066 SPD
1001-1067 Triangles
1001-1068 Circles
1001-1069 Stars
Cat. No. Description
1001-1070 ETO
1001-1071 ENDO
1001-1072 GI
1001-1073 CV
1001-1074 ER
1001-1075 ASC
1001-1076 CCU
1001-1077 DEN
1001-1078 ENT
1001-1079 ICU
1001-1080 SPD
1001-1081 Triangles
1001-1082 Circles
1001-1083 Stars
Offering Precise Instrument / Device TrackingSurg-I-Band®DataMatrixoffershospitalsanexcellentsystemtoorganizeandtracksurgicalinstrumentationanddevices.CombiningthebenefitsofSurg-I-Band® color coding with the technology of bar coding, Surg-I-Band®DataMatrixprovidesafast,easyandpreciseorganizationalsystem.
INSTR
UMENTCAREPRODUCTS
SCANLAN INTERNATIONAL, Inc.•OneScanlanPlaza•SaintPaul,Minnesota55107•U.S.A.•800-328-9458•651-298-0997•FAX651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ent-c
are/
9.4
SCANLAN INTERNATIONAL, Inc.•OneScanlanPlaza•SaintPaul,Minnesota55107•U.S.A.•800-328-9458•651-298-0997•FAX651-298-0018©2012 Scanlan International, Inc.
9.5
INSTR
UMENTCAREPRODUCTS
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ent-c
are/
• Economy–Eachspoolcontains200uniquebarcodes
• 14 colors–Forfastandeasyidentificaiton• Durable–resistanttoflaking,chipping,peelingand
cracking through multiple sterilization cycles• Trouble Free–Easyapplicationandremoval
without damaging instrument• Sterilizable – Tested for steam, gas and flash(immediateuse)sterilization
• 1/4″ Width• Latex-safe
UseyourSmartPhoneandQRReader software to photograph the code below which will demonstrate the use of the Surg-I-Band®DM.
Cat. No. Description
NEW 1001-1084 Red
NEW 1001-1085 Yellow
NEW 1001-1086 Orange
NEW 1001-1087 Blue
NEW 1001-1088 Green
NEW 1001-1089 Brown
NEW 1001-1090 White
Cat. No. Description
NEW 1001-1091 Black
NEW 1001-1092 Glo-Orange
NEW 1001-1093 Purple
NEW 1001-1094 Lime Green
NEW 1001-1095 Grey
NEW 1001-1096 Pink
NEW 1001-1097 Light Blue
Surg-I-Band® Color Coding Data Matrix EASY-TAG™ Tracking System
Cat. No. Description
*1001-904C EASY-TAG™, Black
*1001-905C EASY-TAG™, Red
*1001-906C EASY-TAG™, Yellow
*1001-907C EASY-TAG™, Blue
*1001-908C EASY-TAG™, Green
*1001-909C EASY-TAG™, Pink
Custom EASY-TAG™
Designed to answer the need for a cost-effective, easy, secure method of tracking instruments, trays, equipment & repairs through cleaning, decontamination and sterilization processes.• Sterilizable-EO,SteamandGasPlasma• Versatile Surface - allows placement of pre-printed labels or can be written on both sides of tag• No Adhesives - quick, easy and secure• Easy to Apply-theflexiblehandleloopsaroundinstrumentsandtrayhandles• Easy to Remove-Tear-Away™ handle provides easy separation after use• Color Coded-forfastandeasyidentification• Latex-free
Now you can customize your EASY-TAG™ Tracking System to meet the unique needs within yourhospital.Simplydefineyourmessage, and we do the rest! YourcustomprintEASY-TAG™ will be developed and printed to your specificneeds.
Your custom message, combined with the unique advantages of the EASY-TAG™ Tracking System, offers a powerful combination – providing a cost-effective, secure method of tracking instruments, trays, equipment & repairs through cleaning, decontamination and sterilization processes.
Approximately250Tagsperspool2.5″x4.75″(63.5mmx120.65mm) ElastomerHandlePolymerTag
UseyourSmartPhoneandQRReader software to photograph the code below to view a Video Demonstration of the EASY-TAG™ Tracking System
Cat. No. Description
1001-904 EASY-TAG™, Black
1001-905 EASY-TAG™, Red
1001-906 EASY-TAG™, Yellow
1001-907 EASY-TAG™, Blue
1001-908 EASY-TAG™, Green
1001-909 EASY-TAG™, Pink
*Custommadeattimeoforder.Firmsale.
Available2013
INSTR
UMENTCAREPRODUCTS
SCANLAN INTERNATIONAL, Inc.•OneScanlanPlaza•SaintPaul,Minnesota55107•U.S.A.•800-328-9458•651-298-0997•FAX651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ent-c
are/
9.6
SCANLAN INTERNATIONAL, Inc.•OneScanlanPlaza•SaintPaul,Minnesota55107•U.S.A.•800-328-9458•651-298-0997•FAX651-298-0018©2012 Scanlan International, Inc.
9.7
INSTR
UMENTCAREPRODUCTS
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ent-c
are/
TIP-GUARD® Instrument Protectors
Col
ored
Tint
edC
lear
Vent
ed
1001-89
Black
1001-305
Black
1001-205
1001-405
Black
1001-88
Brown
1001-304
Brown
1001-204
1001-404
Brown
1001-87
Orange
1001-303
Orange
1001-203
1001-403
Orange
1001-91
Maroon
1001-307
Maroon
1001-207
1001-407
Maroon
1001-90
Yellow
1001-306
Yellow
1001-206
1001-406
Yellow
1001-85
Red
1001-301
Red
1001-201
1001-401
Red
1001-86
Green
1001-302
Green
1001-202
1001-402
Green
1001-93
Blue
1001-309
Blue
1001-209
1001-409
Blue
1001-92
White
1001-308
White
1001-208
1001-408
White
1001-84 Variety Pack - 9 assorted color-coded sizes, 100 pieces per package
1001-300 Variety Pack - 9 assorted color-coded sizes, 100 pieces per package
1001-200 Variety Pack - 9 assorted sizes, 100 pieces per package
1001-400 Variety Pack - 9 assorted color-coded sizes, 100 pieces per package
1/8″ (3.2mm)
1″ (25.4mm)
1″ (25.4mm)
1/16″ (1.6mm)
1″ (25.4mm)
5/8″ (15.9mm)
1/16″ (1.6mm)
1″ (25.4mm)
3/8″ (9.5mm)
13/32″ (10.3mm)
3/4″ (19mm)
3/16″ (4.8mm)
1″ (25.4mm)
1/8″ (3.2mm)
1″ (25.4mm)
7/64″ (2.8mm)
3/4″ (19mm)
5/64″ (2mm)
3/4″ (19mm)
1/16″ (1.6mm)
3/4″ (19mm)
Width:
Length:
Height:
TIP-GUARD® Instrument Protectors
Ensuringsafe,cost-effectiveprotectionofbladetipsandedgesforallsurgical instrumentation.• Economical – provides long term use and is cost-effective• Superior protection – safeguards delicate tips and edges of surgical instrumentation• Tested safe–clinicallytestedforsteam,flash(immediateuse)andEOsterilization (sterilityreportavailableuponrequest)
• Versatile – conforms to various shapes and angles• Design variety – available in colored, tinted, clear and vented• Radiopaque• Latex-safe
Endoscopic – Colored
Endoscopic – Clear
Endoscopic – Tinted
1001-111
Red
1001-211
1001-311
Red
1001-112
White
1001-212
1001-312
White
1001-113
Blue
1001-213
1001-313
Blue
1001-114 Variety Pack - 3 assorted color-coded sizes, 30 pieces per package
1001-214 Variety Pack - 3 assorted sizes, 30 pieces per package
1001-314 Variety Pack - 3 assorted color-coded sizes, 30 pieces per package
Internal diameter: 3/16″(5mm)
Overall length: 11/4″(32mm)
Working length: 1″(25.4mm)
Internal diameter: 3/8″(10mm)
Overall length: 15/8″(41mm)
Working length: 11/8″(28.5mm)
Internal diameter: 1/2″(12mm)
Overall length: 13/4″(44.5mm)
Working length: 11/8″(28.5mm)
Patent Pending
INSTR
UMENTCAREPRODUCTS
SCANLAN INTERNATIONAL, Inc.•OneScanlanPlaza•SaintPaul,Minnesota55107•U.S.A.•800-328-9458•651-298-0997•FAX651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ent-c
are/
9.8
SCANLAN INTERNATIONAL, Inc.•OneScanlanPlaza•SaintPaul,Minnesota55107•U.S.A.•800-328-9458•651-298-0997•FAX651-298-0018©2012 Scanlan International, Inc.
9.9
INSTR
UMENTCAREPRODUCTS
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ent-c
are/
TRAVELER™ Autoclavable Pouch
DEMAGNETIZER
Cat. No. Description
2002-01A Surgical Instrument Demagnetizer
Cat. No. Description
1001-950 Traveler™AutoclavablePouch 100pouches(6.5″x6.5″) and100fasteners/box
1001-951 Traveler™AutoclavablePouch 100pouches(6.5″x6.5″) (Fastenersnotincluded)
TheSCANLAN® Surgical Instrument Demagnetizer is a hand-held unit that quickly eliminates magnetic attraction of surgical needles to stainless steel instruments. It features a foam cushion to protect instruments from accidental contact with the unit.• Hand-held unit quickly eliminates magnetic attraction to
needles• Foam cushioned to protect instruments• Economical–Fast,easy,cost-effectivewayto
demagnetize
The Scanlan® Traveler™AutoclavablePouchisdesignedtoprovideafastandreliablemethodofsecuring important documents to the outside of containers.
Madeofdurablematerial,itissemi-transparentandfeaturesaspaciouspouchtoeasilycontainlargedocuments.Customlabelsmayalsobeappliedtotheexteriorofthepouchtosupporttheidentificationandtrackingofthecontents.
• Sterilizable – Not adversely affected by autoclave• Sized to Fit – Holds instrument count sheet with only
minimal folding
• Contents Secure–Fasteneranddualhangingholeensure contents of pouch do not fall out
• Easy On–Adjustablefastenermakesiteasytoputon and take off, no scissors and no adhesives to leave residue behind
• Durable – Strong 3 mil material
• Large Surface Area – Perfect for placing a bar code label or to write on
• Versatile–Autoclavablepouchisgreatforhousingvarious documents required to go through the sterilization process with the container
ForsalewithinU.S.andJapanonly.
ForsalewithinU.S.andJapanonly.
UseyourSmartPhoneandQRReadersoftwaretophotograph the code below to view a
Video Demonstration of the Instrument Demagnetizer
Metal Sterilization Trays, Aluminum, Silicone Inserts, Detachable Lids
Size: 10.5″x21″x2.5″ (27cmx53cmx6.3cm)
Size: 10.25″x21.75″x4″ (26cmx55.2cmx10cm)
2145-03 2146-03
Sterilization Trays n Metal
SCANLAN® instrument sterilization trays assist in the sterilization, storage, and transport of surgical instruments.Alltrayswillwithstandrepeatedgas(plasma),flash,steamorwrappedsterilizationandinclude silicone mats to securely hold instruments and assure safety.
Cat. No. Description Capacity
** 2133-03 Microsterilizationtraywithmatand hardware 1.5″x3.5″x1″ (3.81cmx8.89cmx2.54cm)
(Surgicalpartsnotincluded)
3-4
Micro Sterilization Trays
2133-03
Cat. No. Description Capacity
** 2145-03 Silver-graycolor,10.25″x21″x2.5″ (26x53x6.4cm)
Upto12VATS/MISInstruments
NEW ** 2146-03 Silver-gray color, additional tray insert with full silicone mat,10.25"x21.75"x4"(26cmx55.2cmx10cm)
20+VATS/MISInstruments
*Custommadeattimeoforder.Firmsale. **Firmsale
Custommodificationsavailableuponrequest
Foracompletelistingofmodelsvisit...www.scanlaninternational.com
Alltraysaresteam,flash (immediateuse),ETO,andplasmasterilizationcompatible
INSTR
UMENTCAREPRODUCTS
SCANLAN INTERNATIONAL, Inc.•OneScanlanPlaza•SaintPaul,Minnesota55107•U.S.A.•800-328-9458•651-298-0997•FAX651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ent-c
are/
9.10
SCANLAN INTERNATIONAL, Inc.•OneScanlanPlaza•SaintPaul,Minnesota55107•U.S.A.•800-328-9458•651-298-0997•FAX651-298-0018©2012 Scanlan International, Inc.
9.11
INSTR
UMENTCAREPRODUCTS
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ent-c
are/
Sterilization Trays n Metal
Cat. No. Description Capacity
** 2138-03 Silver-graycolor,10″x10″x1.5″(25.4x25.4x3.8cm) 8-10
** 2139-03 Silver-graycolor,10″x15″x1.5″(25.4x38x3.8cm) Fullsiliconematonbase,partialmatoncovertosecuresmall instruments
20+ or 7VATS/MISInstruments
** 2140-03 Silver-graycolor,10″x15″x1.5″(25.4x38x3.8cm) 10-12
** 2141-03 Silver-gray color, base with accessory compartment, additionaltrayinsert,10″x15″x2.6″(25.4x38x6.6cm)
15+
** 2142-03 Silver-gray color, silicone insert across full width of base, additionaltrayinsert,10″x15″x2.6″(25.4x38x6.6cm)
18+
Metal Sterilization Trays, Aluminum, Silicone Inserts, Detachable Lids
Size: 10″x10″x1.5″ (25.4cmx25.4cmx3.8cm)
Size: 10″x15″x2.6″ (25.4cmx38cmx6.6cm)
2138-03
2142-03
2140-032139-03
2141-03
Size: 10″x15″x1.5″ (25.4cmx38cmx3.8cm)
Size: 10″x15″x1.5″ (25.4cmx38cmx3.8cm)
Size: 10″x15″x2.6″ (25.4cmx38cmx6.6cm)
Sterilization Trays n Plastic
Cat. No. Description Capacity
** 2083-01 6″x2″x0.7″(15cmx5.1cmx1.8cm) 1-2
** 2083-02 6″x3″x0.7″(15cmx7.6cmx1.8cm) 3
** 2083-03 7.8″x3″x0.7″(19.8cmx7.6cmx1.8cm) 3
** 2083-05 9.6″x5.5″x0.7″(24.4cmx14cmx1.8cm) 5-10
** 2081-11 10″x6″x0.7″(25.4cmx15cmx1.8cm) 6-10
** 2082-10 10″x6″x1.5″(25.4cmx15cmx3.8cm) 6-10
** 2081-21 10″x6″x1.5″(25.4cmx15cmx3.8cm) 10+
** 8008-66 Metalclasp,12″x9″x0.7″(30.5x23cmx1.8cm) 8-12
** 8008-62 12″x9″x0.7″(30.5x23cmx1.8cm) 8-12
Plastic Sterilization Trays, Silicone Mat
Size: 6″x2″x0.7″ (15cmx5.1cmx1.8cm)
Size: 9.6″x5.5″x0.7″ (24.4cmx14cmx1.8cm)
Size: 10″x6″x1.5″ (25.4cmx15cmx3.8cm)
Size: 6″x2″x0.7″ (15cmx5.1cmx1.8cm)
Size: 10″x6″x0.7″ (25.4cmx15cmx1.8cm)
Size: 12″x9″x0.7″ (30.5cmx23cmx1.8cm)
Size: 7.8″x3″x0.7″ (19.8cmx7.6cmx1.8cm)
Size: 10″x6″x1.5″ (25.4cmx15cmx3.8cm)
Size: 12″x9″x0.7″ (30.5cmx23cmx1.8cm)
2083-01
2083-05
2081-21
2083-02
2081-11
8008-66
2083-03
2082-10
8008-62
*Custommadeattimeoforder.Firmsale. **Firmsale
Custommodificationsavailableuponrequest
Foracompletelistingofmodelsvisit...www.scanlaninternational.com
Alltraysaresteam,flash (immediateuse),ETO,andplasmasterilizationcompatible
Alltraysaresteam,flash (immediateuse),ETO,andplasmasterilizationcompatible
*Custommadeattimeoforder.Firmsale. **FirmsaleCustommodificationsavailableuponrequest
Foracompletelistingofmodelsvisit...www.scanlaninternational.com
INSTR
UMENTCAREPRODUCTS
SCANLAN INTERNATIONAL, Inc.•OneScanlanPlaza•SaintPaul,Minnesota55107•U.S.A.•800-328-9458•651-298-0997•FAX651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/inst
rum
ent-c
are/
9.12
Sterilization Trays n Plastic
Cat. No. Description Capacity
** 2083-16 Metalclasps,13x7.5″x0.7″(33.1x19.1cmx1.8cm) 10-15
** 2081-12 Plasticclasps,15″x10″x0.7″(38x25.4cmx1.8cm) 10-15
** 2084-12 Metalclasps,additionaltrayinsertandextrasiliconemat 9.5″x8″x1.5″(24.1x20.3cmx3.8cm)
12-15
** 2082-20 Plastic clasps, deep base 15″x10″x1.5″(38x25.4cmx3.8cm)
10-15
** 2081-23 Plasticclasps,withadditional1/2trayinsertandextrasiliconemat 15″x10″x1.5″(38x25.4cmx3.8cm)
15+
** 2081-24 Metalclasps,additionaltrayinsertandextrasiliconemat 15″x10″x1.5″(38x25.4cmx3.8cm)
20-30
** 2084-20 Metalclasps,additionaltrayinsertandextrasiliconemat 17.8″x9.7″x1.5″(45.2x25cmx3.8cm)
24-30+
Plastic Sterilization Trays, Silicone Mat
Size: 13″x7.5″x0.7″ (33.1cmx19.1cmx1.8cm)
Size: 15″x10″x1.5″ (38cmx25.4cmx3.8cm)
Size: 15″x10″x1.5″ (38cmx25.4cmx3.8cm)
Size: 615″x10″x0.7″ (38cmx25.4cmx1.8cm)
Size: 9.5″x8″x1.5″ (24.1cmx20.3cmx3.8cm)
Size: 15″x10″x1.5″ (38cmx25.4cmx3.8cm)
Size: 17.8″x9.7″x1.5″ (45.2cmx25.4cmx3.8cm)
2083-16
2082-20
2081-24
2081-12 2084-12
2081-23
2084-20
Alltraysaresteam,flash (immediateuse),ETO,andplasmasterilizationcompatible
*Custommadeattimeoforder.Firmsale. **FirmsaleCustommodificationsavailableuponrequest
Foracompletelistingofmodelsvisit...www.scanlaninternational.com
SIN
GLE
-US
E P
RO
DU
CTS
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/sin
gle-
use-
prod
ucts
/
AORTA / VEIN PUNCHES ...................................................... 10.1
GRAFT MARKERS ................................................................. 10.1
VASCULAR TUNNELING Vasculer Tunneling System ............................................. 10.2
VASCU-STATT® BULLDOG CLAMP SYSTEM VASCU-STATT® Single-Use Clamps ............................... 10.4 VASCU-STATT® II Single-Use Clamps ............................ 10.4 VASCU-STATT® Micro Single-Use Clamps ..................... 10.4 VASCU-STATT® PLUS .................................................... 10.5 VASCU-STATT® II PLUS ................................................. 10.5 VASCU-STATT® PLUS Approximator .............................. 10.5 VASCU-STATT® II PLUS Approximator ........................... 10.5 VASCU-STATT® Appliers ................................................. 10.5 VASCU-STATT® Approximator ........................................ 10.6 VASCU-STATT® II Approximator ..................................... 10.7
Use your Smart Phone and QR
Reader software to photograph the code below which will take you to this section on the Scanlan Website
SILICONE LOOPS SURG-I-LOOP® Silicone Loops ........................................10.8 SURG-I-LOOP® PLUS ......................................................10.8
CLAMP AND JAW COVERS .................................................. 10.9
MICROSURGICAL KNIVES ................................................... 10.9
PIN PROTECTORS ............................................................... 10.10
SUTURE BOOTS .................................................................. 10.10
SUTURE TAGS ..................................................................... 10.11
VEIN HOLDER ...................................................................... 10.11
SURGICAL SKIN MARKERS ............................................... 10.11
SIN
GLE
-US
E P
RO
DU
CTS
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/sin
gle-
use-
prod
ucts
/
1
2
3
4
5
6
7
8
9
10
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
INCHES CMSCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018
©2012 Scanlan International, Inc.
10.1
SIN
GLE
-US
E P
RO
DU
CTS
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/sin
gle-
use-
prod
ucts
/
LATEX-SAFE
Cat. No. Description
1001-600 2.7 mm
1001-601 3.5 mm
1001-602 4.0 mm
1001-604 4.5 mm
1001-605 5.0 mm
1001-606 5.5 mm
1001-607 6.0 mm
Cat. No. Description
1001-620 2.7 mm
1001-621 3.5 mm
1001-622 4.0 mm
1001-624 4.5 mm
1001-626 5.0 mm
1001-628 5.5 mm
1001-629 6.0 mm
Cat. No. Description
1001-608 4.0 x 2.0 mm
1001-610 6.0 x 2.0 mm
Cat. No. Description
1001-609 4.0 x 2.0 mm
1001-611 6.0 x 2.0 mm
Precisely engineered Scissor Cut™ blades featured on SCANLAN® single-use aorta/vein punches provide clean accurate incisions for myocardial revascularization. With large finger rings for greater control and accuracy, and tapered tips for an unobstructed view of the operating field, SCANLAN® single-use aorta/vein punches are available in two lengths (Original and Ultimate™), two styles (round and elliptical), and nine cutting sizes. Radiopaque and latex-safe.
Scanlan offers two styles of single-use graft markers. U-shaped A/C LOCATOR® graft markers assess graft patency during postoperative cardiac angiography. RADIOMARK® graft markers are smaller, disk-shaped graft markers designed for use with peripheral and coronary grafts. Following graft placement, all graft markers can be applied using 5-0 or 6-0 sutures and will not migrate. SCANLAN® graft markers are flexible, lightweight, radiopaque, latex-safe, and tissue-compatible to meet all implant criteria.
Cat. No. Description
1001-83 A/C LOCATOR® graft marker
1001-831 RADIOMARK® graft marker
Original Round
Round Elliptical
Original Elliptical
Ultimate Elliptical
Ultimate Round
Ultimate (7 1/2″)
Original (5 3/4″)
Graft Markers
One per sterile package, 5 packages per box
One per sterile package, 10 packages per box
AORTA / VEIN PUNCHES
SIN
GLE
-US
E P
RO
DU
CTS
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/sin
gle-
use-
prod
ucts
/
10.2
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
10.3
SIN
GLE
-US
E P
RO
DU
CTS
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/sin
gle-
use-
prod
ucts
/
LATEX-SAFE LATEX-SAFEVascular Tunneling
9009-10 Vascular Tunneler and A/V Access Tunneler Grasping Forceps Set Set includes one Vascular Tunneler 20.5″ (52 cm), one A/V Access Tunneler 12″ (30.5 cm), and one tunneler storage /sterilization tray 3.5″ x 26″ x 1.5″ (8.9 cm x 66 cm x 3.8 cm). (Set does not include tunneler sheaths.)
9009-12 Vascular Tunneler Grasping Forceps Set Set includes one Vascular Tunneler 20.5″ (52 cm), and one tunneler storage / sterilization tray 3.5″ x 26″ x 1.5″ (8.9 cm x 66 cm x 3.8 cm). (Set does not include tunneler sheaths.)
9009-26 Tunneler Storage / Sterilization Tray 3.5″ x 26″ x 1.5″ (8.9 cm x 66 cm x 3.8 cm). Accommodates one Vascular and one A/V Access Tunneler Grasping Forceps (will not accommodate the Full Curve Tunneler Grasping Forceps).
Interior Diameters (mm)
For Grafts Up To (mm)
Vascular Tunneler 9009-24 20.5″ (52 cm)
9009-16 20.5″ (52 cm) 12 10
9009-18 20.5″ (52 cm) 9.5 8
A/V Access Tunneler 9009-14 12″ (30.5 cm)
9009-20 12″ (30.5 cm) 9 8
9009-22 12″ (30.5 cm) 7 6
A/V Access Tunneler Partial Curve 9009-13 12″ (30.5 cm)
9009-20 12″ (30.5 cm) 9 8
9009-22 12″ (30.5 cm) 7 6
A/V Access Tunneler Full Curve 9009-15 12″ (30.5 cm)
9009-21 12″ (30.5 cm) 9 8
9009-23 12″ (30.5 cm) 7 6
Reinforced grafts may require larger sheaths.
SHEATHS One per sterile package, 5 packages per box
Vascular Tunneling
The SCANLAN® Vascular Tunneling System combines high quality grasping forceps with single-use tunneler sheaths for fast, accurate, atraumatic implantation of subcutaneous grafts.
The grasping forceps features include . . . • Four designs• Two sheath diameters – may be used with large and
small sheath diameters• Knurled handle – for positive control• Handle indicator – to verify tunneler curve direction• Stainless steel – offering strength and long life, as well
as quick, reliable, atraumatic graft placement• Stainless steel sterilization/storage case
The single-use sheath features include . . .• Two sheath diameters – large and small• Two sheath lengths – to accommodate various grafts• Reliable – allows atraumatic tunneling and placement of
grafts without kinking, twisting, stretching, or pulling• Smooth polymer material – offers near frictionless graft
placement, essential for many new graft surfaces• Minimal sheath diameters – avoid excessive tissue
disruption• Color-coded – provides easy length and diameter
identification• Radiopaque• Latex-safe
TUNNELERS
Use your Smart Phone and QR Reader software to photograph the
code below to view a Video Demonstration of the Vascular Tunneling System
U.S. Patent Number 5,944,729
SIN
GLE
-US
E P
RO
DU
CTS
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/sin
gle-
use-
prod
ucts
/
10.4
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
10.5
SIN
GLE
-US
E P
RO
DU
CTS
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/sin
gle-
use-
prod
ucts
/
LATEX-SAFE LATEX-SAFEBulldog Clamps
Cat. No. Description
1001-552 Mini, straight (red) clamping pressure 10-15 grams
1001-553 Mini, angled 45° (red) clamping pressure 10-15 grams
1001-550 Midi, straight (white) clamping pressure 25-30 grams
1001-551 Midi, angled 45° (white) clamping pressure 25-30 grams
1001-554 Maxi, straight (blue) clamping pressure 50-60 grams
1001-555 Maxi, angled 45° (blue) clamping pressure 50-60 grams
Cat. No. Description
1001-570 Mini, straight (green) clamping pressure 20-25 grams
1001-571 Mini, angled 45° (green) clamping pressure 20-25 grams
1001-572 Midi, straight (yellow) clamping pressure 75-80 grams
1001-573 Midi, angled 45° (yellow) clamping pressure 75-80 grams
1001-574 Maxi, straight (orange) clamping pressure 165-175 grams
1001-575 Maxi, angled 45° (orange) clamping pressure 165-175 grams
Cat. No. Description
1001-506 VASCU-STATT® Applier, Straight, 8 1/2″ (21.5 cm)
1001-506A VASCU-STATT® Applier, Angled, 8 1/2″ (21.5 cm)
1001-506M Micro VASCU-STATT® Applier, Straight, 8 1/2″ (21.5 cm)
* 9009-506 VASCU-STATT® Applier, Straight, 15 1/2″ (39.4 cm)
* 9009-506A VASCU-STATT® Applier, Angled, 15 1/2″ (39.4 cm)
VASCU-STATT® PLUS
VASCU-STATT® II PLUS
VASCU-STATT® Appliers for Bulldog Clamps
Cat. No. Description
1001-560 Mini, straight (red) clamping pressure 10-15 grams
1001-561 Mini, angled 45° (red) clamping pressure 10-15 grams
1001-562 Midi, straight (white) clamping pressure 25-30 grams
1001-563 Midi, angled 45° (white) clamping pressure 25-30 grams
1001-564 Maxi, straight (blue) clamping pressure 50-60 grams
1001-565 Maxi, angled 45° (blue) clamping pressure 50-60 grams
Cat. No. Description
1001-580 Mini, straight (green) clamping pressure 20-25 grams
1001-581 Mini, angled 45° (green) clamping pressure 20-25 grams
1001-582 Midi, straight (yellow) clamping pressure 75-80 grams
1001-583 Midi, angled 45°, midi (yellow) clamping pressure 75-80 grams
1001-584 Maxi, straight (orange) clamping pressure 165-175 grams
1001-585 Maxi, angled 45° (orange) clamping pressure 165-175 grams
VASCU-STATT® PLUS APPROXIMATOR
VASCU-STATT® II PLUS APPROXIMATOR
with GENTLE-JAW™ Surface with GENTLE-JAW™ Surface
with Firmer Clamping Pressure & GENTLE-JAW™ Surface
with Firmer Clamping Pressure & GENTLE-JAW™ Surface
Two each per sterile package, 5 packages per box
Two per sterile package, 5 packages per box
One each per sterile package, 5 packages per box
One per sterile package, 5 packages per box
Bulldog Clamps
VASCU-STATT® single-use bulldog clamps are a lightweight, cost-effective alternative to metal bulldog clamps. Unlike metal bulldog clamps (whose clamping pressure changes with use), VASCU-STATT® single-use bulldog clamps offer preset tensions, ensuring consistent clamping pressure with each use.
The entire line of VASCU-STATT® single-use bulldog clamps feature...• Two designs – straight or angled• Lightweight, cost-effective, plastic construction• A wide range of preset, consistent clamping pressures• Color-coded – by clamp size and pressure• Single-use, sterile packaged• Atraumatic – jaw designs• Versatile – may be applied by hand or with the specially designed
VASCU-STATT® appliers• Radiopaque• Latex-safe
Cat. No. Description
1001-500 Midi, straight (white) clamping pressure 25-30 grams
1001-501 Midi, angled 45° (white) clamping pressure 25-30 grams
1001-502 Mini, straight (red) clamping pressure 10-15 grams
1001-503 Mini, angled 45° (red) clamping pressure 10-15 grams
1001-504 Maxi, straight (blue) clamping pressure 50-60 grams
1001-505 Maxi, angled 45° (blue) clamping pressure 50-60 grams
Cat. No. Description
1001-530 Mini, straight (green) clamping pressure 20-25 grams
1001-531 Mini, angled 45° (green) clamping pressure 20-25 grams
1001-532 Midi, straight (yellow) clamping pressure 75-80 grams
1001-533 Midi, angled 45° (yellow) clamping pressure 75-80 grams
1001-534 Maxi, straight (orange) clamping pressure 165-175 grams
1001-535 Maxi, angled 45° (orange) clamping pressure 165-175 grams Cat. No. Description
1001-499 Micro VASCU-STATT® (purple) clamping pressure 15-20 grams
1001-529 Micro VASCU-STATT® II (black) clamping pressure 30-40 grams
VASCU-STATT®
VASCU-STATT® Micro
VASCU-STATT® II
Parallel clamp designed for maximum occlusion and atraumatic pressure
with Firmer Clamping Pressure
1001-502
1001-530
1001-500 1001-5041001-503
1001-531 1001-532 1001-5341001-533 1001-535
1001-501 1001-505 Two each per sterile package, 5 packages per box
Two each per sterile package, 5 packages per box
Two each per sterile package, 5 packages per box.
* Custom made at time of order. Firm sale. ** Firm sale
Custom modifications available upon request
SIN
GLE
-US
E P
RO
DU
CTS
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/sin
gle-
use-
prod
ucts
/
10.6
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
10.7
SIN
GLE
-US
E P
RO
DU
CTS
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/sin
gle-
use-
prod
ucts
/
LATEX-SAFE LATEX-SAFEBulldog Clamps Bulldog Clamps
• Facilitates end-to-end anastomosis• Three sizes – with straight or angled jaws• Radiopaque• Latex-Safe
VASCU-STATT® APPROXIMATOR VASCU-STATT® II APPROXIMATOR
Cat. No. Description
1001-507 Mini, straight (red) clamping pressure 10-15 grams
1001-508 Mini, angled 45° (red) clamping pressure 10-15 grams
1001-509 Midi, straight (white) clamping pressure 25-30 grams
1001-510 Midi, angled 45° (white) clamping pressure 25-30 grams
1001-511 Maxi, straight (blue) clamping pressure 50-60 grams
1001-512 Maxi, angled 45° (blue) clamping pressure 50-60 grams
Cat. No. Description
1001-540 Mini, straight (green) clamping pressure 20-25 grams
1001-541 Mini, angled 45° (green) clamping pressure 20-25 grams
1001-542 Midi, straight (yellow) clamping pressure 75-80 grams
1001-543 Midi, angled 45° (yellow) clamping pressure 75-80 grams
1001-544 Maxi, straight (orange) clamping pressure 165-175 grams
1001-545 Maxi, angled 45° (orange) clamping pressure 165-175 grams
with Firmer Clamping Pressure
One per sterile package, 5 packages per box One per sterile package,
5 packages per box
1001-509
1001-511
1001-507 1001-540
1001-508 1001-541
1001-542
1001-544
1001-543
1001-545
1001-510
1001-512
Designed for Intestinal, Thoracic, Pediatric, and other specialty types of surgery.• Atraumatic – converts standard clamps into atraumatic
instruments• Deep serrations – provides firm, atraumatic occlusion• Contoured design – provides secure pressure - will not
slip or twist • Radiopaque• Latex-safe
Cat. No. Description
1001-740 SOFT-GRIP™ fabric clamp covers Length 5″ (127 mm), Width 3/8″ (9.5 mm)
Cat. No. Description
1001-72 1/10″ (2.5 mm), Red
1001-73 2/10″ (5.0 mm), White
1001-74 3/10″ (7.5 mm), Blue
Straight Blade Cat. No.
Curved Blade Cat. No.
Round Blade Cat. No.
Pointed Blade Cat. No.
45º Angle Blade Cat. No. Description
1001-4101 1001-4201 1001-4301 1001-4401 1001-4501 Straight Handle, 8″ (203 mm)
1001-4102 1001-4202 1001-4302 1001-4402 1001-4502 Short Handle, 5″ (127 mm)
1001-4103 1001-4203 1001-4303 1001-4403 1001-4503 Bayonet Handle, 9″ (229 mm)
1001-4104 1001-4204 1001-4304 1001-4404 1001-4504 Long Bayonet Handle, 11″ (279 mm)
The SCANLAN® Super Cut™ microsurgical knives offer surgeons an excellent combination of control and superior performance. The unique Super Cut™ blade design, which is renowned for its razor sharp cutting edge and trademark black handles, has now been incorporated into this set of knives. This blade design, combined with a new Non-Slip Handle, offers surgeons a perfect balance of precision and accuracy. Radiopaque and latex safe.
Two per sterile package,10 packages per box
Two per sterile package,10 packages per box
One per sterile package,5 packages per box
SOFT-GRIP™
SUPER CUT™ Microsurgical Knives
SURG-I-PAW®
Special foam and fabric combination provides a soft, non-slip clamp surface.• Special material – assures no fibrous residue in
operating field• Versatile – designed to fit a variety of instruments• Ease of application – designed with convenient pull tabs• Adaptable - may be trimmed to desired length• Radiopaque• Latex-safe
Fabric Clamp Covers Instrument Jaw Covers
Cat. No. Description
1001-75 Red, Mini
1001-76 Red, Maxi
1001-77 Blue, Mini
1001-78 Blue, Maxi
1001-78A Blue, Super Maxi
1001-79 Yellow, Mini
1001-80 Yellow, Maxi
1001-81 White, Mini
1001-81M White, Micro
1001-82 White, Maxi
Designed to assist surgeons in complicated surgical fields by providing retraction, occlusion and identification of arteries, veins, nerves and ureters.
Cat. No. Description
1001-81P Blunt needle (1.2 mm) (light green)
1001-82P Semi-sharp needle (1.2 mm) (light orange)
SURG-I-LOOP® Plus features a solid stainless steel tip for fast, accurate placement / passing in complicated surgical fields. Ideal for minimally-invasive cardiac surgery. Radiopaque and latex-safe.
• Unique design – provides access to complicated surgical fields• Versatile – can retract and occlude arteries, veins, nerves and ureters• Durable – retains preset tension• Radiopaque• Latex-Safe
SURG-I-LOOP® PLUS
Super Maxi (5 x 1.27 mm)
Maxi (2.5 x 1.02 mm)
Mini (1.5 x .88 mm)
Micro (0.5 x .26 mm)
Two per sterile package, 10 packages per box
Two per sterile package, 10 packages per box
Length 16 1/2″ (42 cm)
Length 14 3/4″ (37 cm)
SIN
GLE
-US
E P
RO
DU
CTS
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/sin
gle-
use-
prod
ucts
/
10.8
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
10.9
SIN
GLE
-US
E P
RO
DU
CTS
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/sin
gle-
use-
prod
ucts
/
LATEX-SAFE LATEX-SAFESINGLE-USE PRODUCTSSilicone Loops
Cat. No. Description
1001-520 Suture Tags
Regular Tip Cat. No.
Extra Fine Tip Cat. No. Description
1001-710 1001-725 Gentian Violet
One per sterile package with ruler, 10 per box
Two per sterile package, 5 packages per box
One per sterile package, 10 packages per box
SUTURE-STATT®
SURGICAL SKIN MARKERS
Cat. No. Description
1001-760 Solem™ vein holder 6 1/2″ (16.5 cm)
SOLEM™ Vein HolderIdeal for assisting surgeons during vessel anastomosis, the SCANLAN® Solem™ vein holder gently yet firmly grasps vein grafts and precisely positions suture without trauma. Its slim profile and concave tip assures optimal exposure and the lightly serrated clip provides steady, consistent pressure, minimizing graft movement. Radiopaque and latex-safe.
Available in gentian violet with both regular and extra fine tips, SCANLAN® surgical skin markers are appropriate for marking, identifying, coding, and contouring the surgical area. Radiopaque and latex-safe.
Available in gentian violet with regular tip, SCANLAN® PrepMARK™ surgical skin markers are made with a unique prep-resistant ink and ideal for marking, identifying, coding, and contouring the surgical area. Radiopaque and latex-safe.
Designed to facilitate the grasping and tagging of suture during ophthalmic or delicate procedures.• Secure – firmly holds the finest suture without damage• Keeps sutures out of the operative field• Lightweight – only 0.5 grams • Radiopaque• Latex-safe
Suture Tags
Unique single-use protective covers for exposed tips of orthopedic pins and wires.• Unique design – provides excellent protection from
dermal abrasions, damage to bedding, clothing snags, and surgical glove snags
• Size selection – designed to fit most common pins and wires
• Double-wall design – provides additional protection • Color coded – providing easy identification• Radiopaque• Latex-safe
Cat. No. Description
1001-513 Original Mini, Yellow (3 pair per cartridge)
1001-514 Original Standard, Yellow (5 pair per cartridge)
1001-515 Large Mini, Pink (3 pair per cartridge)
1001-516 Large Standard, Pink (5 pair per cartridge)
Cat. No. Description
301-0110 White (fits 3 sizes K-wire) 0.028″ (0.71 mm), 0.035″ (0.89 mm), 0.045″ (1.14 mm)
301-0120 Pink and White 0.062″ (1.57 mm)
301-0130 Blue and White 0.078″ (5/64″) (1.98 mm)
One per sterile package, 5 packages per box
Two per sterile package, 20 packages per box
PINCAP® SUTURE BOOT™
Designed to facilitate the grasping and tagging of suture.• Atraumatic – firmly holds the finest suture without
damage• Secure – will not slip• Color coded – bright yellow and pink for immediate
identification • Foam cartridge – designed for
fast / easy access• Radiopaque• Latex-safe
Orthopedic Pin Protectors Instrument Jaw Covers
Regular Tip Cat. No. Description
NEW 1001-730 PrepMARK™ Surgical Skin Marker, Sterile, plus ruler, Box of 50 One per sterile package with ruler, 50 per box
NEW 1001-731 PrepMARK™ Surgical Skin Marker, Non-Sterile, plus ruler, Container of 50
SIN
GLE
-US
E P
RO
DU
CTS
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/sin
gle-
use-
prod
ucts
/
10.10
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
10.11
SIN
GLE
-US
E P
RO
DU
CTS
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/sin
gle-
use-
prod
ucts
/
LATEX-SAFE LATEX-SAFESINGLE-USE PRODUCTSSINGLE-USE PRODUCTS
Available 2013
1
2
3
4
5
6
7
8
9
10
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25INCHES CM
SIN
GLE
-US
E P
RO
DU
CTS
http
://w
ww
.sca
nlan
inte
rnat
iona
l.com
/sin
gle-
use-
prod
ucts
/
10.12
IND
EX
IND
EX
1
2
3
4
5
6
7
8
9
10
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
INCHES CM
i
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
IND
EXCatalog Number Page
301-0110 . . . . . . . . . . . . . . 10.10301-0120 . . . . . . . . . . . . . 10.10301-0130 . . . . . . . . . . . . . 10.101001-04 . . . . . . . . . . . . . . . 6.151001-05 . . . . . . . . . . . . . . . 6.151001-06 . . . . . . . . . . . . . . . 6.151001-07 . . . . . . . . . . . . . . . 6.151001-10 . . . . . . . . . . . . . . . 6.171001-11 . . . . . . . . . . . . . . . . 6.171001-12 . . . . . . . . . . . . . . . 6.171001-13 . . . . . . . . . . . . . . . 6.171001-14 . . . . . . . . . . . . . . . 6.171001-21 . . . . . . . . . . . . . . . 5.351001-23 . . . . . . . . . . . . . . . 5.351001-49 . . . . . . . . . . . . . . . . 9.11001-54 . . . . . . . . . . . . . . . 2.421001-59 . . . . . . . . . . . . . . . . 9.11001-60 . . . . . . . . . . . . . . . . 9.11001-61 . . . . . . . . . . . . . . . . 9.11001-64 . . . . . . . . . . . . . . . . 9.11001-65 . . . . . . . . . . . . . . . . 9.11001-66 . . . . . . . . . . . . . . . . 9.11001-67 . . . . . . . . . . . . . . . . 9.11001-68 . . . . . . . . . . . . . . . . 9.11001-69 . . . . . . . . . . . . . . . . 9.11001-70 . . . . . . . . . . . . . . . . 9.11001-71 . . . . . . . . . . . . . . . . 9.11001-72 . . . . . . . . . . . . . . . 10.91001-73 . . . . . . . . . . . . . . . 10.91001-74 . . . . . . . . . . . . . . . 10.91001-75 . . . . . . . . . . . . . . . 10.81001-76 . . . . . . . . . . 6.27, 10.81001-76N . . . . . . . . . . . . . . 8.51 1001-77 . . . . . . . . . . . . . . . 10.81001-78 . . . . . . . . . . . . . . . 10.81001-78A . . . . . . . . . . . . . . 10.81001-79 . . . . . . . . . . . . . . . 10.81001-80 . . . . . . . . . . . . . . . 10.81001-81 . . . . . . . . . . . . . . . 10.81001-81M . . . . . . . . . . . . . . 10.81001-81P . . . . . . . . . . . . . . 10.81001-82 . . . . . . . . . . . . . . . 10.81001-82P . . . . . . . . . . . . . . 10.8
1001-83 . . . . . . . . . . . . . . . 10.11001-84 . . . . . . . . . . . . . . . . 9.71001-85 . . . . . . . . . . . . . . . . 9.71001-86 . . . . . . . . . . . . . . . . 9.71001-87 . . . . . . . . . . . . . . . . 9.71001-88 . . . . . . . . . . . . . . . . 9.71001-89 . . . . . . . . . . . . . . . . 9.71001-90 . . . . . . . . . . . . . . . . 9.71001-91 . . . . . . . . . . . . . . . . 9.71001-92 . . . . . . . . . . . . . . . . 9.71001-93 . . . . . . . . . . . . . . . . 9.71001-94 . . . . . . . . . . . . . . . . 9.11001-95 . . . . . . . . . . . . . . . . 9.11001-96 . . . . . . . . . . . . . . . . 9.11001-97 . . . . . . . . . . . . . . . . 9.11001-98 . . . . . . . . . . . . . . . . 9.11001-99 . . . . . . . . . . . . . . . . 9.11001-111 . . . . . . . . . . . . . . . . 9.61001-112 . . . . . . . . . . . . . . . . 9.61001-113 . . . . . . . . . . . . . . . . 9.61001-114 . . . . . . . . . . . . . . . . 9.61001-200 . . . . . . . . . . . . . . . 9.71001-201 . . . . . . . . . . . . . . . 9.71001-202 . . . . . . . . . . . . . . . 9.71001-203 . . . . . . . . . . . . . . . 9.71001-204 . . . . . . . . . . . . . . . 9.71001-205 . . . . . . . . . . . . . . . 9.71001-206 . . . . . . . . . . . . . . . 9.71001-207 . . . . . . . . . . . . . . . 9.71001-208 . . . . . . . . . . . . . . . 9.71001-209 . . . . . . . . . . . . . . . 9.71001-211 . . . . . . . . . . . . . . . . 9.61001-212 . . . . . . . . . . . . . . . 9.61001-213 . . . . . . . . . . . . . . . 9.61001-214 . . . . . . . . . . . . . . . 9.61001-300 . . . . . . . . . . . . . . . 9.71001-301 . . . . . . . . . . . . . . . 9.71001-302 . . . . . . . . . . . . . . . 9.71001-303 . . . . . . . . . . . . . . . 9.71001-304 . . . . . . . . . . . . . . . 9.71001-305 . . . . . . . . . . . . . . . 9.71001-306 . . . . . . . . . . . . . . . 9.71001-307 . . . . . . . . . . . . . . . 9.7
1001-308 . . . . . . . . . . . . . . . 9.71001-309 . . . . . . . . . . . . . . . 9.71001-311 . . . . . . . . . . . . . . . . 9.61001-312 . . . . . . . . . . . . . . . 9.61001-313 . . . . . . . . . . . . . . . 9.61001-314 . . . . . . . . . . . . . . . 9.61001-400 . . . . . . . . . . . . . . . 9.71001-401 . . . . . . . . . . . . . . . 9.71001-402 . . . . . . . . . . . . . . . 9.71001-403 . . . . . . . . . . . . . . . 9.71001-404 . . . . . . . . . . . . . . . 9.71001-405 . . . . . . . . . . . . . . . 9.71001-406 . . . . . . . . . . . . . . . 9.71001-407 . . . . . . . . . . . . . . . 9.71001-408 . . . . . . . . . . . . . . . 9.71001-409 . . . . . . . . . . . . . . . 9.71001-499 . . . . . . . . . . . . . . 10.41001-500 . . . . . . . . . . . . . . 10.41001-501 . . . . . . . . . . . . . . 10.41001-502 . . . . . . . . . . . . . . 10.41001-503 . . . . . . . . . . . . . . 10.41001-504 . . . . . . . . . . . . . . 10.41001-505 . . . . . . . . . . . . . . 10.41001-506 . . . . . . . . . 6.27, 10.51001-506N . . . . . . . . . . . . . 8.511001-506A . . . . . . . . . . . . . 10.51001-506M . . . . . . . . . . . . . 10.51001-507 . . . . . . . . . . . . . . 10.61001-508 . . . . . . . . . . . . . . 10.61001-509 . . . . . . . . . . . . . . 10.61001-510 . . . . . . . . . . . . . . 10.61001-511 . . . . . . . . . . . . . . . 10.61001-512 . . . . . . . . . . . . . . 10.61001-513 . . . . . . . . . . . . . 10.101001-514 . . . . . . . . . . . . . 10.101001-515 . . . . . . . . . . . . . 10.101001-516 . . . . . . . . . . . . . 10.101001-520 . . . . . . . . . . . . . 10.111001-529 . . . . . . . . . . . . . . 10.41001-530 . . . . . . . . . . . . . . 10.41001-531 . . . . . . . . . . . . . . 10.41001-532 . . . . . . . . . . . . . . 10.41001-533 . . . . . . . . . . . . . . 10.4
iiiii
IND
EX
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
IND
EXCatalog Number Page
1001-1017 . . . . . . . . . . . . . . 9.21001-1018 . . . . . . . . . . . . . . 9.21001-1019 . . . . . . . . . . . . . . 9.21001-1020 . . . . . . . . . . . . . . 9.21001-1021 . . . . . . . . . . . . . . 9.21001-1022 . . . . . . . . . . . . . . 9.21001-1023 . . . . . . . . . . . . . . 9.21001-1024 . . . . . . . . . . . . . . 9.21001-1025 . . . . . . . . . . . . . . 9.21001-1026 . . . . . . . . . . . . . . 9.21001-1027 . . . . . . . . . . . . . . 9.21001-1028 . . . . . . . . . . . . . . 9.21001-1029 . . . . . . . . . . . . . . 9.21001-1030 . . . . . . . . . . . . . . 9.21001-1031 . . . . . . . . . . . . . . 9.21001-1032 . . . . . . . . . . . . . . 9.21001-1033 . . . . . . . . . . . . . . 9.21001-1034 . . . . . . . . . . . . . . 9.21001-1035 . . . . . . . . . . . . . . 9.21001-1036 . . . . . . . . . . . . . . 9.21001-1037 . . . . . . . . . . . . . . 9.21001-1038 . . . . . . . . . . . . . . 9.21001-1039 . . . . . . . . . . . . . . 9.21001-1040 . . . . . . . . . . . . . . 9.21001-1041 . . . . . . . . . . . . . . 9.21001-1042 . . . . . . . . . . . . . . 9.21001-1043 . . . . . . . . . . . . . . 9.21001-1044 . . . . . . . . . . . . . . 9.21001-1045 . . . . . . . . . . . . . . 9.21001-1046 . . . . . . . . . . . . . . 9.21001-1047 . . . . . . . . . . . . . . 9.21001-1048 . . . . . . . . . . . . . . 9.21001-1049 . . . . . . . . . . . . . . 9.21001-1050 . . . . . . . . . . . . . . 9.21001-1051 . . . . . . . . . . . . . . 9.21001-1052 . . . . . . . . . . . . . .9.21001-1053 . . . . . . . . . . . . . . 9.21001-1054 . . . . . . . . . . . . . . 9.21001-1055 . . . . . . . . . . . . . . 9.21001-1056 . . . . . . . . . . . . . . 9.21001-1057 . . . . . . . . . . . . . . 9.21001-1058 . . . . . . . . . . . . . . 9.21001-1059 . . . . . . . . . . . . . . 9.2
1001-1060 . . . . . . . . . . . . . . 9.21001-1061 . . . . . . . . . . . . . . 9.21001-1062 . . . . . . . . . . . . . . 9.21001-1063 . . . . . . . . . . . . . . 9.21001-1064 . . . . . . . . . . . . . . 9.21001-1065 . . . . . . . . . . . . . . 9.21001-1066 . . . . . . . . . . . . . . 9.21001-1067 . . . . . . . . . . . . . . 9.21001-1068 . . . . . . . . . . . . . . 9.21001-1069 . . . . . . . . . . . . . . 9.21001-1070 . . . . . . . . . . . . . . 9.21001-1071 . . . . . . . . . . . . . . 9.21001-1072 . . . . . . . . . . . . . . 9.21001-1073 . . . . . . . . . . . . . . 9.21001-1074 . . . . . . . . . . . . . . 9.21001-1075 . . . . . . . . . . . . . . 9.21001-1076 . . . . . . . . . . . . . . 9.21001-1077 . . . . . . . . . . . . . . 9.21001-1078 . . . . . . . . . . . . . . 9.21001-1079 . . . . . . . . . . . . . . 9.21001-1080 . . . . . . . . . . . . . . 9.21001-1081 . . . . . . . . . . . . . . 9.21001-1082 . . . . . . . . . . . . . . 9.21001-1083 . . . . . . . . . . . . . . 9.21001-1084 . . . . . . . . . 1.12, 9.41001-1085 . . . . . . . . . 1.12, 9.41001-1086 . . . . . . . . . 1.12, 9.41001-1087 . . . . . . . . . 1.12, 9.41001-1088 . . . . . . . . . 1.12, 9.41001-1089 . . . . . . . . . 1.12, 9.41001-1090 . . . . . . . . . 1.12, 9.41001-1091 . . . . . . . . . 1.12, 9.41001-1092 . . . . . . . . . 1.12, 9.41001-1093 . . . . . . . . . 1.12, 9.41001-1094 . . . . . . . . . 1.12, 9.41001-1095 . . . . . . . . . 1.12, 9.41001-1096 . . . . . . . . . 1.12, 9.41001-1097 . . . . . . . . . 1.12, 9.41001-3000 . . . . . . . . . . . . . . 8.11001-3010 . . . . . . . . . . . . . . 8.11001-3110 . . . . . . . . . . . . . . . 8.11001-3115 . . . . . . . . . . . . . . . 8.11001-4101 . . . . . . . . . 8.5, 10.9
1001-4102 . . . . . . . . . 8.5, 10.91001-4103 . . . . . . . . . 8.5, 10.91001-4104 . . . . . . . . . 8.5, 10.91001-4201 . . . . . . . . . 8.5, 10.91001-4202 . . . . . . . . . 8.5, 10.91001-4203 . . . . . . . . . 8.5, 10.91001-4204 . . . . . . . . . 8.5, 10.91001-4301 . . . . . . . . . 8.5, 10.91001-4302 . . . . . . . . . 8.5, 10.91001-4303 . . . . . . . . . 8.5, 10.91001-4304 . . . . . . . . . 8.5, 10.91001-4401 . . . . . . . . . 8.5, 10.91001-4402 . . . . . . . . . 8.5, 10.91001-4403 . . . . . . . . . 8.5, 10.91001-4404 . . . . . . . . . 8.5, 10.91001-4501 . . . . . . . . . 8.5, 10.91001-4502 . . . . . . . . . 8.5, 10.91001-4503 . . . . . . . . . 8.5, 10.91001-4504 . . . . . . . . . 8.5, 10.92002-01A . . . . . . . . . . . . . . . 9.82002-13 . . . . . . . . . . . . . . . 2.232002-14 . . . . . . . . . . . . . . . 2.222002-16 . . . . . . . . . . . . . . . 2.222002-22 . . . . . . . . . . . . . . . 2.302002-23 . . . . . . . . . . . . . . . 2.232002-28 . . . . . . . . . . . . . . . 2.262002-30 . . . . . . . . . . . . . . . 2.262002-32 . . . . . . . . . . . . . . . 2.272002-33 . . . . . . . . . . . . . . . 2.232002-34 . . . . . . . . . . . . . . . 2.272002-36 . . . . . . . . . . . . . . . 2.272002-38 . . . . . . . . . . . . . . . 2.242002-40 . . . . . . . . . . . . . . . 2.242002-42 . . . . . . . . . . . . . . . 2.252002-43 . . . . . . . . . . . . . . . 2.232002-44 . . . . . . . . . . . . . . . 2.292002-46 . . . . . . . . . . . . . . . 2.292002-48 . . . . . . . . . . . . . . . 2.292002-50 . . . . . . . . . . . . . . . 2.292002-51 . . . . . . . . . . . . . . . 2.232002-52 . . . . . . . . . . . . . . . 2.242002-54 . . . . . . . . . . . . . . . 2.302002-62 . . . . . . . . . . . . . . . 2.19
1001-534 . . . . . . . . . . . . . . 10.41001-535 . . . . . . . . . . . . . . 10.41001-540 . . . . . . . . . . . . . . 10.71001-541 . . . . . . . . . . . . . . 10.71001-542 . . . . . . . . . . . . . . 10.71001-543 . . . . . . . . . . . . . . 10.71001-544 . . . . . . . . . . . . . . 10.71001-545 . . . . . . . . . . . . . . 10.71001-550 . . . . . 6.27, 8.51, 10.51001-550N . . . . . . . . . . . . . 8.511001-551 . . . . . . . . . . . . . . 10.51001-552 . . . . . . . . . . . . . . 10.51001-553 . . . . . . . . . . . . . . 10.51001-554 . . . . . . . . . . . . . . 10.51001-555 . . . . . . . . . . . . . . 10.51001-560 . . . . . . . . . . . . . . 10.51001-561 . . . . . . . . . . . . . . 10.51001-562 . . . . . . . . . . . . . . 10.51001-563 . . . . . . . . . . . . . . 10.51001-564 . . . . . . . . . . . . . . 10.51001-565 . . . . . . . . . . . . . . 10.51001-570 . . . . . . . . . . . . . . 10.51001-571 . . . . . . . . . . . . . . 10.51001-572 . . . . . . . . . . . . . . 10.51001-573 . . . . . . . . . . . . . . 10.51001-574 . . . . . . . . . . . . . . 10.51001-575 . . . . . . . . . . . . . . 10.51001-580 . . . . . . . . . . . . . . 10.51001-581 . . . . . . . . . . . . . . 10.51001-582 . . . . . . . . . . . . . . 10.51001-583 . . . . . . . . . . . . . . 10.51001-584 . . . . . . . . . . . . . . 10.51001-585 . . . . . . . . . . . . . . 10.51001-600 . . . . . . . . . . . . . . 10.11001-601 . . . . . . . . . . . . . . 10.11001-602 . . . . . . . . . . . . . . 10.11001-604 . . . . . . . . . . . . . . 10.11001-605 . . . . . . . . . . . . . . 10.11001-606 . . . . . . . . . . . . . . 10.11001-607 . . . . . . . . . . . . . . 10.11001-608 . . . . . . . . . . . . . . 10.11001-609 . . . . . . . . . . . . . . 10.11001-610 . . . . . . . . . . . . . . 10.1
1001-611 . . . . . . . . . . . . . . . 10.11001-620 . . . . . . . . . . . . . . 10.11001-621 . . . . . . . . . . . . . . 10.11001-622 . . . . . . . . . . . . . . 10.11001-624 . . . . . . . . . . . . . . 10.11001-626 . . . . . . . . . . . . . . 10.11001-628 . . . . . . . . . . . . . . 10.11001-629 . . . . . . . . . . . . . . 10.11001-630 . . . . . . . . . . . . . . . 9.11001-631 . . . . . . . . . . . . . . . 9.11001-632 . . . . . . . . . . . . . . . 9.11001-633 . . . . . . . . . . . . . . . 9.11001-634 . . . . . . . . . . . . . . . 9.11001-635 . . . . . . . . . . . . . . . 9.11001-636 . . . . . . . . . . . . . . . 9.11001-637 . . . . . . . . . . . . . . . 9.11001-638 . . . . . . . . . . . . . . . 9.11001-639 . . . . . . . . . . . . . . . 9.11001-640 . . . . . . . . . . . . . . . 9.11001-641 . . . . . . . . . . . . . . . 9.11001-642 . . . . . . . . . . . . . . . 9.11001-643 . . . . . . . . . . . . . . . 9.11001-710 . . . . . . . . .6.31, 10.111001-725 . . . . . . . . . . . . . 10.111001-730 . . . . . . . . 1.12, 10.111001-731 . . . . . . . . 1.12, 10.111001-740 . . . . . . . . . . . . . . 10.91001-760 . . . . . . . . . . . . . 10.111001-800 . . . . . . . . . . . . . . . 9.31001-801 . . . . . . . . . . . . . . . 9.31001-802 . . . . . . . . . . . . . . . 9.31001-803 . . . . . . . . . . . . . . . 9.31001-804 . . . . . . . . . . . . . . . 9.31001-805 . . . . . . . . . . . . . . . 9.31001-806 . . . . . . . . . . . . . . . 9.31001-807 . . . . . . . . . . . . . . . 9.31001-808 . . . . . . . . . . . . . . . 9.31001-809 . . . . . . . . . . . . . . . 9.31001-810 . . . . . . . . . . . . . . . 9.31001-811 . . . . . . . . . . . . . . . . 9.31001-812 . . . . . . . . . . . . . . . 9.31001-813 . . . . . . . . . . . . . . . 9.31001-814 . . . . . . . . . . . . . . . 9.3
1001-815 . . . . . . . . . . . . . . . 9.31001-816 . . . . . . . . . . . . . . . 9.31001-817 . . . . . . . . . . . . . . . 9.31001-818 . . . . . . . . . . . . . . . 9.31001-819 . . . . . . . . . . . . . . . 9.31001-820 . . . . . . . . . . . . . . . 9.31001-821 . . . . . . . . . . . . . . . 9.31001-822 . . . . . . . . . . . . . . . 9.31001-823 . . . . . . . . . . . . . . . 9.31001-824 . . . . . . . . . . . . . . . 9.31001-825 . . . . . . . . . . . . . . . 9.31001-831 . . . . . . . . . . . . . . 10.11001-904 . . . . . . . . . . . . . . . 9.51001-904C . . . . . . . . . .1.11, 9.51001-905 . . . . . . . . . . . . . . . 9.51001-905C . . . . . . . . . .1.11, 9.51001-906 . . . . . . . . . . . . . . . 9.51001-906C . . . . . . . . . .1.11, 9.51001-907 . . . . . . . . . . . . . . . 9.51001-907C . . . . . . . . . .1.11, 9.51001-908 . . . . . . . . . . . . . . . 9.51001-908C . . . . . . . . . .1.11, 9.51001-909 . . . . . . . . . . . . . . . 9.51001-909C . . . . . . . . . .1.11, 9.51001-950 . . . . . . . . . . . . . . . 9.81001-951 . . . . . . . . . . . . . . . 9.81001-1000 . . . . . . . . . . . . . . 9.21001-1001 . . . . . . . . . . . . . . 9.21001-1002 . . . . . . . . . . . . . . 9.21001-1003 . . . . . . . . . . . . . . 9.21001-1004 . . . . . . . . . . . . . . 9.21001-1005 . . . . . . . . . . . . . . 9.21001-1006 . . . . . . . . . . . . . . 9.21001-1007 . . . . . . . . . . . . . . 9.21001-1008 . . . . . . . . . . . . . . 9.21001-1009 . . . . . . . . . . . . . . 9.21001-1010 . . . . . . . . . . . . . . 9.21001-1011 . . . . . . . . . . . . . . . 9.21001-1012 . . . . . . . . . . . . . . 9.21001-1013 . . . . . . . . . . . . . . 9.21001-1014 . . . . . . . . . . . . . . 9.21001-1015 . . . . . . . . . . . . . . 9.21001-1016 . . . . . . . . . . . . . . 9.2
Catalog Number Page
viv
IND
EX
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
IND
EXCatalog Number Page
3003-159-8 . . . . . . . . . . . . . . 3.73003-159N . . . . . . . . . . . . . 8.143003-160 . . . . . . . . . . . . . . . 3.63003-160N . . . . 8.13, 8.21, 8.373003-162 . . . . . . . . . . . . . . . 3.63003-162N . . . . . . . . . . . . . 8.133003-164 . . . . . . . . . . . . . . . 3.63003-164N . . . . 8.13, 8.21, 8.373003-166 . . . . . . . . . . . . . . . 3.63003-170 . . . . . . . . . . . . . . . 4.53003-171 . . . . . . . . . . . . . . . 4.53003-171N . . . . . . . . . . . . . . 8.73003-172 . . . . . . . . . . . . . . . 4.53003-173 . . . . . . . . . . . . . . . 4.53003-173N . . . . . . . . . . . . . . 8.73003-174 . . . . . . . . . . . . . . . 4.53003-175 . . . . . . . . . . . . . . . 4.53003-175N . . . . . . . . . . . . . . 8.73003-177 . . . . . . . . . . . . . . . 4.53003-177-3N . . . . 8.7, 8.21, 8.373003-177-4N . . . . . . . . . . . . . 8.73003-177N . . . . . . . . . . . . . . 8.73003-180 . . . . . . . . . . . . . . . 4.53003-181 . . . . . . . . . . . . . . . 4.53003-181N . . . . . . . . . . . . . . 8.73003-182 . . . . . . . . . . . . . . . 4.53003-183 . . . . . . . . . . . . . . . 4.53003-183N . . . . . . . . . . . . . . 8.73003-184 . . . . . . . . . . . . . . . 4.53003-185 . . . . . . . . . . . . . . . 4.53003-185N . . . . . . . . . . . . . . 8.73003-187N . . . . . . . . . . . . . . 8.73003-190 . . . . . . . . . . . . . . . 4.53003-190N . . . . . . . . . . . . . . 8.73003-191 . . . . . . . . . . . . . . . 4.53003-193 . . . . . . . . . . . . . . . 4.53003-195 . . . . . . . . . . . . . . . 4.53003-200 . . . . . . . . . . . . . . . 4.53003-200-12 . . . . . . . . . . . . . 4.53003-202 . . . . . . . . . . . . . . . 4.53003-204 . . . . . . . . . . . . . . . 4.53003-207 . . . . . . . . . . . . . . . 4.73003-224 . . . . . . . . . . . . . . . 4.7
3003-225 . . . . . . . . . . . . . . . 4.73003-226 . . . . . . . . . . . . . . . 4.73003-227 . . . . . . . . . . . . . . . 4.73003-229 . . . . . . . . . . . . . . . 4.73003-234 . . . . . . . . . . . . . . . 4.73003-234-1 . . . . . . . . . 4.7, 6.263003-234-1N . . . . . . . . 8.8, 8.503003-235 . . . . . . . . . . . . . . . 4.73003-236 . . . . . . . . . . . . . . . 4.73003-237 . . . . . . . . . . . . . . . 4.73003-238N . . . . . . . . . . . . . . 8.83003-239 . . . . . . . . . . . . . . . 4.73003-243 . . . . . . . . . . . . . . . 4.73003-243N . . . . . . . . . . . . . . 8.83003-261 . . . . . . . . . . . . . . . 4.83003-263 . . . . . . . . . . . . . . . 4.83003-265 . . . . . . . . . . . . . . . 4.83003-342 . . . . . . . . . . . 1.3, 4.13003-342N . . . . . . . . . . . . . . 8.33003-344 . . . . . . . . . . . 1.3, 4.13003-344N . . . . . . . . . . . . . . 8.33003-346 . . . . . . . . . . . 1.3, 4.13003-346N . . . . . . . . . . . . . . 8.33003-348 . . . . . . . . . . . 1.3, 4.13003-348N . . . . . . . . . . . . . . 8.33003-352 . . . . . . . . . . . . . . . 4.23003-352N . . . . . . . . . . . . . . 8.33003-354 . . . . . . . . . . . . . . . 4.23003-354N . . . . . . . . . . . . . . 8.33003-356 . . . . . . . . . . . . . . . 4.23003-356N . . . . . . . . . . . . . . 8.3 3003-358 . . . . . . . . . . . . . . . 4.23003-358N . . . . . . . . . . . . . . 8.33003-362 . . . . . . . . . . . 1.3, 4.13003-364 . . . . . . . . . . . 1.3, 4.13003-366 . . . . . . . . . . . 1.3, 4.13003-368 . . . . . . . . . . . 1.3, 4.13003-381 . . . . . . . . . . 4.3, 6.213003-390 . . . . . . . . . . 4.3, 6.213003-391 . . . . . . . . . . 4.3, 6.233003-402 . . . . . . . . . . . . . . 4.133003-404 . . . . . . . . . . . . . . 4.133003-406 . . . . . . . . . . . . . . 4.13
3003-408 . . . . . . . . . . . . . . 4.133003-412 . . . . . . . . . . . . . . 4.113003-414 . . . . . . . . . . . . . . 4.113003-416 . . . . . . . . . . . . . . 4.113003-418 . . . . . . . . . . . . . . 4.113003-422 . . . . . . . . . . . . . . 4.123003-424 . . . . . . . . . . . . . . 4.123003-426 . . . . . . . . . . . . . . 4.123003-428 . . . . . . . . . . . . . . 4.123003-430 . . . . . . . . . . . . . . 4.103003-430N . . . . . . . . . . . . . . 8.93003-432 . . . . . . . . . . . . . . 4.103003-432N . . . . . . . . . . . . . . 8.93003-434 . . . . . . . . . . . . . . 4.103003-434N . . . . . . . . . . . . . . 8.93003-436 . . . . . . . . . . . . . . 4.113003-438 . . . . . . . . . . . . . . 4.113003-440 . . . . . . . . . . . . . . 4.113003-442 . . . . . . . . . . . . . . 4.113003-450 . . . . . . . . . . . . . . 4.103003-450N . . . . . . . . . . . . . . 8.93003-452 . . . . . . . . . . . . . . 4.103003-452N . . . . . . . . . . . . . . 8.93003-454 . . . . . . . . . . . . . . 4.103003-454N . . . . . . . . . . . . . . 8.93003-462 . . . . . . . . . . . . . . 4.123003-462N . . . . . . . . . . . . . 8.103003-464 . . . . . . . . . . . . . . 4.123003-466 . . . . . . . . . . . . . . 4.123003-466N . . . . . . . . . . . . . 8.103003-510 . . . . . . . . . . . . . . . 4.63003-530 . . . . . . . . . . . . . . . 4.63003-540 . . . . . . . . . . . . . . . 4.63003-550 . . . . . . . . . . . . . . . 4.93003-570 . . . . . . . . . . . . . . . 4.93003-580 . . . . . . . . . . . . . . . 4.93003-610 . . . . . . . . . . . . . . . 2.43003-611 . . . . . . . . . . . . . . . . 2.43003-612 . . . . . . . . . . . . . . . 2.43003-613 . . . . . . . . . . . . . . . 2.33003-614 . . . . . . . . . . 2.3, 6.27 3003-614N . . . . . . . . 8.51, 8.543003-616 . . . . . . . . . . . . . . . 2.1
Catalog Number Page
2002-64 . . . . . . . . . . . . . . . 2.192002-66 . . . . . . . . . . . . . . . 2.192002-70 . . . . . . . . . . . . . . . 2.192002-72 . . . . . . . . . . . . . . . 2.192002-76 . . . . . . . . . . . . . . . 2.252002-78 . . . . . . . . . . . . . . . 2.172002-80 . . . . . . . . . . . . . . . 2.212002-82 . . . . . . . . . . . . . . . 2.212002-86 . . . . . . . . . . . . . . . 2.212002-88 . . . . . . . . . . . . . . . 2.212002-90 . . . . . . . . . . . . . . . 2.172002-92 . . . . . . . . . . . . . . . 2.182002-94 . . . . . . . . . . . . . . . 2.182002-96 . . . . . . . . . . . . . . . 2.182002-100 . . . . . . . . . . . . . . 2.202002-106 . . . . . . . . . . . . . . 2.202002-110 . . . . . . . . . . . . . . . 2.202002-112 . . . . . . . . . . . . . . . 2.232002-113 . . . . . . . . . . . . . . . 2.232002-116 . . . . . . . . . . . . . . . 2.282002-117 . . . . . . . . . . . . . . . 2.282002-128 . . . . . . . . . . . . . . 2.162002-134 . . . . . . . . . . . . . . 2.162002-184 . . . . . . . . . . . . . . 2.162002-186 . . . . . . . . . . . . . . 2.162002-229 . . . . . . . . . . . . . . 2.132002-230 . . . . . . . . . . . . . . 2.132002-231 . . . . . . . . . . . . . . 2.132002-232 . . . . . . . . . . . . . . 2.142002-234 . . . . . . . . . . . . . . 2.142002-235 . . . . . . . . . 2.14, 6.272002-235N . . . . . . . . 8.51, 8.552002-236 . . . . . . . . . . . . . . 2.142002-238 . . . . . . . . . . . . . . 2.142002-240 . . . . . . . . . . . . . . 2.152002-242 . . . . . . . . . . . . . . 2.152002-244 . . . . . . . . . . . . . . 2.152002-246 . . . . . . . . . . . . . . 2.152002-248 . . . . . . . . . . . . . . 2.152002-250 . . . . . . . . . . . . . . 2.152081-11 . . . . . . . . . . . .6.31, 9.112081-12 . . . . . . . . . . . . . . . 9.122081-21 . . . . . . . . . . . . . . . 9.11
2081-23 . . . . . . . . . . . . . . . 9.122081-23N . . . . . . . . . . . . . . 8.512081-24 . . . . . . . . . . . . . . . 9.122082-10 . . . . . . . . . . . . . . . 9.112082-20 . . . . . . . . . . . . . . . 9.122083-01 . . . . . . . . . . . . . . . 9.112083-02 . . . . . . . . . . . . . . . 9.112083-03 . . . . . . . . . . . . . . . 9.112083-05 . . . . . . . . . . . . . . . 9.112083-16 . . . . . . . . . . . . . . . 9.122084-12 . . . . . . . . . . . . . . . 9.122084-20 . . . . . . . . . . . . . . . 9.122133-03 . . . . . . . . . . . . . . . . 9.92138-03 . 6.23, 6.25, 6.31, 9.102138-03N . . . . . . . . . 8.22, 8.382139-03 . . . . . . . . . . . . . . . 9.102140-03 . . . . . . . . . . 6.21, 9.102140-03N . . . . . . . . . 8.22, 8.382141-03N . . . . . 8.22, 8.51, 8.382142-03 . . . . . . . . . . 6.27, 9.102145-02N . . . . . . . . . . . . . . . 8.22145-03 . . . . . . . . . . . . . . . . 9.92146-03 . . . . . . . . . . . 1.10, 9.93003-02 . . . . . . . . . . . . . . . 3.103003-03 . . . . . . . . . . . . . . . 3.103003-04 . . . . . . . . . . 3.10, 6.263003-04N . . . . . . . . . 8.17, 8.503003-05 . . . . . . . . . . 3.10, 6.263003-05N . . . . . . . . . 8.17, 8.503003-06 . . . . . . . . . . . . . . . 3.103003-07 . . . . . . . . . . . . . . . 3.103003-09 . . . . . . . . . . . . . . . 3.113003-46 . . . . . . . . . . . . . . . . 2.53003-47 . . . . . . . . . . . . . . . . 2.53003-52 . . . . . . . . . . . . . . . . 2.63003-54 . . . . . . . . . . . . . . . . 2.63003-56 . . . . . . . . . . . . . . . . 2.63003-64 . . . . . . . . . . . . . . . . 2.73003-66 . . . . . . . . . . . . . . . . 2.73003-67 . . . . . . . . . . . . . . . . 2.53003-68 . . . . . . . . . . . . . . . . 2.73003-69 . . . . . . . . . . . . . . . . 2.93003-70 . . . . . . . . . . . . . . . . 2.8
3003-72 . . . . . . . . . . . . . . . . 2.83003-74 . . . . . . . . . . . . . . . 2.113003-79 . . . . . . . . . . . . . . . . 2.93003-80 . . . . . . . . . . . . . . . 2.103003-82 . . . . . . . . . . . . . . . 2.103003-84 . . . . . . . . . . . . . . . 2.103003-86 . . . . . . . . . . . . . . . 2.103003-88 . . . . . . . . . . . . . . . 2.113003-90A . . . . . . . . . . . . . . . 4.43003-90AN . . . . . . . . . . . . . . 8.63003-90N . . . . . . . . . . . . . . . 8.63003-91AN . . . . . . . . . . . . . . 8.63003-91N . . . . . . . . . . . . . . . 8.63003-93 . . . . . . . . . . . . . . . . 4.43003-93A . . . . . . . . . . . . . . . 4.43003-93AN . . . . . . . . . . . . . . 8.63003-93N . . . . . . . . . . . . . . . 8.63003-94-4N . . . . . . . . . . . . . . 8.63003-94A . . . . . . . . . . . . . . . 4.43003-94AN . . . . . . . . . . . . . . 8.63003-94N . . . . . . . . . . . . . . . 8.63003-150 . . . . . . . . . . . . . . . 3.73003-150N . . . . . . . . . . . . . 8.143003-152N . . . . . . . . . . . . . 8.143003-154 . . . . . . . . . . . . . . . 3.73003-154-3N . . . 8.14, 8.21, 8.373003-154-4N . . . . . . . . . . . . 8.143003-154N . . . . . . . . . . . . . 8.143003-156-3N . . . 8.14, 8.21, 8.373003-156-4N . . . . . . . . . . . . 8.143003-156N . . . . . . . . . . . . . 8.143003-158 . . . . . . . . . . . . . . . 3.73003-158N . . . . . . . . . . . . . 8.143003-158-3N . . . 8.14, 8.21, 8.373003-158-4N . . . . . . . . . . . . 8.143003-158-8 . . . . . . . . . 3.7, 6.263003-158-8N . . . . . . . 8.14, 8.503003-158-9 . . . . . . . . . . . . . . 3.73003-158-10 . . . . . . . . . . . . . 3.73003-159 . . . . . . . . . . . . . . . 3.73003-159-10 . . . . . . . . . . . . . 3.73003-159-3N . . . 8.14, 8.21, 8.373003-159-4N . . . . . . . . . . . . 8.14
viivi
IND
EX
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
IND
EX
3003-618 . . . . . . . . . . . . . . . 2.13003-620 . . . . . . . . . . . . . . . 2.13003-628 . . . . . . . . . . . . . . . 2.23003-628N . . . . . . . . . . . . . 8.543003-630 . . . . . . . . . . . . . . . 2.23003-630N . . . . . . . . . . . . . 8.543003-632 . . . . . . . . . . . . . . . 2.43003-633 . . . . . . . . . . . . . . . 2.33003-634 . . . . . . . . . . . . . . . 2.33003-636 . . . . . . . . . . . . . . . 2.13003-637 . . . . . . . . . . . . . . . 2.13003-638 . . . . . . . . . . . . . . . 2.13003-710 . . . . . . . . . . . . . . . 3.83003-710N . . . . . . . . . . . . . 8.123003-712 . . . . . . . . . . . . . . . 3.83003-712N . . . . . . . . . . . . . 8.123003-714 . . . . . . . . . . . . . . . 3.83003-714N . . . . . . . . . . . . . 8.123003-716 . . . . . . . . . . . . . . . 3.83003-716N . . . . . . . . . . . . . 8.123003-720 . . . . . . . . . . 3.6, 6.263003-720N . . . . . . . . 8.13, 8.503003-724 . . . . . . . . . . . . . . . 3.63003-724N . . . . . . . . . . . . . 8.133003-726 . . . . . . . . . . . . . . . 3.63003-728 . . . . . . . . . . . . . . . 3.63003-730 . . . . . . . . . . . . . . . 3.83003-730N . . . . . . . . . . . . . 8.153003-738 . . . . . . . . . . . . . . . 3.93003-738N . . . . . . . . . . . . . 8.163003-740 . . . . . . . . . . . . . . . 3.93003-740N . . . . . . . . . . . . . 8.163003-742 . . . . . . . . . . . . . . . 3.93003-742N . . . . . . . . . . . . . 8.163003-750 . . . . . . . . . . . . . . . 3.93003-750N . . . . . . . . . . . . . 8.163003-752 . . . . . . . . . . . . . . . 3.93003-752N . . . . . . . . . . . . . 8.163003-760 . . . . . . . . . . . . . . . 3.93003-760N . . . . . . . . . . . . . 8.163003-762 . . . . . . . . . . . . . . . 3.93003-770 . . . . . . . . . . 3.3, 6.213003-770N . . . . . . . . . . . . . . 8.3
Catalog Number Page Catalog Number Page
3003-774 . . . . . . . . . . 3.3, 6.233003-774N . . . . . . . . . . . . . . 8.33003-775 . . . . . . . . . . 3.3, 6.233003-775N . . . . . . . . . . . . . . 8.33003-776 . . . . . . . . . . 3.3, 6.233003-778 . . . . . . . . . . 3.3, 6.213003-778N . . . . . . . . . . . . . . 8.33003-779 . . . . . . . . . . . . . . . 3.33003-780 . . . . . . . . . . . . . . . 3.33003-780N . . . . . . . . . . . . . . 8.33003-782 . . . . . . . . . . . . . . . 3.33003-782N . . . . . . . . . . . . . . 8.33003-784 . . . . . . . . . . . . . . . 3.33003-784N . . . . . . . . . . . . . . 8.33003-786 . . . . . . . . . . . . . . . 3.33003-786N . . . . . . . . . . . . . . 8.33003-794 . . . . . . . . . . . . . . 3.113003-800N . . . . . . . . . . . . . 8.643003-804 . . . . . . . . . . . 3.1, 3.53003-804N . . . . . . . . . . . . . . 8.33003-806 . . . . . . . . . . . 3.4, 3.53003-806N . . . . . . . . . . . . . . 8.33003-810 . . . . . . . 3.3, 3.5, 6.213003-810N . . . . . . . . . . . . . . 8.33003-816 . . . . . . . . . . . 3.2, 3.53003-816N . . . . . . . . . . . . . . 8.33003-818 . . . . . . . . . . . 3.2, 3.53003-818N . . . . . . . . . . . . . . 8.33003-823N . . . . . . . . . . . . . 8.183003-825N . . . . . . . . . . . . . 8.183003-832N . . . . . . . . . . . . . 8.183003-840N . . . . 8.19, 8.22, 8.383003-841N . . . . 8.19, 8.22, 8.383003-842N . . . . 8.19, 8.22, 8.383003-843N . . . . . . . . . . . . . 8.193003-846N . . . . . . . . . . . . . 8.193003-847N . . . . . . . . . . . . . 8.193003-850N . . . . . . . . . . . . . 8.203003-851N . . . . 8.20, 8.22, 8.383003-866N . . . . . . . . . . . . . 8.113003-868N . . . . . . . . . . . . . 8.113003-870N . . . . . . . . . . . . . 8.113003-872N . . . . . . . . . . . . . 8.11
3003-902 . . . . . . . . . . . . . . . 3.23003-902N . . . . . . . . . . . . . . 8.33003-904 . . . . . . . . . . . . . . . 3.23003-904N . . . . . . . . . . . . . . 8.33003-906 . . . . . . . . . . . . . . . 3.23003-906N . . . . . . . . . . . . . . 8.33003-908 . . . . . . . . . . . . . . . 3.23003-908N . . . . . . . . . . . . . . 8.33003-912 . . . . . . . . . . . . . . . 3.23003-912N . . . . . . . . . . . . . . 8.33003-914 . . . . . . . . . . . . . . . 3.23003-914N . . . . . . . . . . . . . . 8.33003-916 . . . . . . . . . . . . . . . 3.23003-916N . . . . . . . . . . . . . . 8.33003-918 . . . . . . . . . . . . . . . 3.23003-918N . . . . . . . . . . . . . . 8.33003-922 . . . . . . . . . . . . . . . 3.13003-922N . . . . . . . . . . . . . . 8.33003-924 . . . . . . . . . . . . . . . 3.13003-924N . . . . . . . . . . . . . . 8.33003-926 . . . . . . . . . . . . . . . 3.13003-926N . . . . . . . . . . . . . . 8.33003-928 . . . . . . . . . . . . . . . 3.13003-928N . . . . . . . . . . . . . . 8.33003-932 . . . . . . . . . . . . . . . 3.43003-932N . . . . . . . . . . . . . . 8.33003-934 . . . . . . . . . . . . . . . 3.43003-934N . . . . . . . . . . . . . . 8.33003-936 . . . . . . . . . . . . . . . 3.43003-936N . . . . . . . . . . . . . . 8.33003-938 . . . . . . . . . . . . . . . 3.43003-938N . . . . . . . . . . . . . . 8.33049-90N . . . . . . . . . . . . . . 8.313049-92N . . . . . . . . . . . . . . 8.313190-08 . . . . . . . . . . . . . . . 3.193781-10N . . . . . . . . . . . . . . 8.633781-16N . . . . . . . . . . . . . . 8.633784-08N . . . . . . . . . . . . . . 8.623784-09N . . . . . . . . . . . . . . 8.633784-10N . . . . . . . . . . . . . . 8.633784-11N . . . . . . . . . . . . . . 8.633784-12N . . . . . . . . . . . . . . 8.633784-13N . . . . . . . . . . . . . . 8.63
3784-14N . . . . . . . . . . . . . . 8.643784-15N . . . . . . . . . . . . . . 8.643784-30 . . . . . . . . . . . . . . . 6.133784-30N . . . . . . . . . . . . . . 8.643784-31 . . . . . . . . . . . . . . . 6.133784-31N . . . . . . . . . . . . . . 8.643784-32 . . . . . . . . . . . . . . . 6.133784-32N . . . . . . . . . . . . . . 8.643784-33 . . . . . . . . . . . . . . . 6.133784-33N . . . . . . . . . . . . . . 8.643784-40N . . . . . . . . . . . . . . 8.633784-41N . . . . . . . . . . . . . . 8.633784-42N . . . . . . . . . . . . . . 8.633784-43N . . . . . . . . . . . . . . 8.633784-44N . . . . . . . . . . . . . . 8.623784-45N . . . . . . . . . . . . . . 8.623784-80N . . . . . . . . . . . . . . 8.623784-451N . . . . . . . . . . . . . 8.623786-21 . . . . . . . . . . . . . . . . 6.53786-21N . . . . . . . . . . . . . . 8.603786-22 . . . . . . . . . . . . . . . . 6.53786-22N . . . . . . . . . . . . . . 8.603786-23 . . . . . . . . . . . . . . . . 6.53786-23N . . . . . . . . . . . . . . 8.603786-24 . . . . . . . . . . . . . . . . 6.53786-24N . . . . . . . . . . . . . . 8.603786-25 . . . . . . . . . . . . . . . . 6.53786-25N . . . . . . . . . . . . . . 8.603786-28 . . . . . . . . . . . . . . . . 6.53786-28N . . . . . . . . . . . . . . 8.603786-30 . . . . . . . . . . . . . . . . 6.43786-30N . . . . . . . . . . . . . . 8.593786-31 . . . . . . . . . . . . . . . . 6.43786-31N . . . . . . . . . . . . . . 8.593786-32 . . . . . . . . . . . . . . . . 6.43786-32N . . . . . . . . . . . . . . 8.593786-40 . . . . . . . . . . . . . . . . 6.43786-40N . . . . . . . . . . . . . . 8.593788-01N . . . . . . . . . . . . . . 8.443788-02N . . . . . 8.22, 8.38, 8.443788-04N . . . . . . . . . . . . . . 8.443788-05N . . . . . . . . . . . . . . 8.443788-06N . . . . . . . . . . . . . . 8.44
3788-08N . . . . . . . . . . . . . . 8.303788-10N . . . . . . . . . . . . . . 8.303788-12N . . . . . . . . . . . . . . 8.363788-13N . . . . . . . . . . . . . . 8.363788-14N . . . . . . . . . . . . . . 8.363788-15N . . . . . . . . . . . . . . 8.363788-27N . . . . . . . . . . . . . . 8.443788-29N . . . . . . . . . . . . . . 8.443789-01N . . . . . . . . . . . . . . 8.433789-02N . . . . . . . . . . . . . . 8.433789-03N . . . . . . . . . . . . . . 8.433789-04N . . . . . . . . . . . . . . 8.433789-07N . . . . . . . . . . . . . . 8.303789-08N . . . . . . . . . . . . . . 8.303789-11N . . . . . . . . . . . . . . 8.353789-11TN . . . . . . . . . . . . . 8.113789-12N . . . . . . . . . . . . . . 8.353789-13N . . . . . . . . . . . . . . 8.353789-14-3N . . . . 8.22, 8.35, 8.383789-14N . . . . . . . . . . . . . . 8.353789-16N . . . . . . . . . . . . . . 8.433789-17N . . . . . . . . . . . . . . 8.433789-20N . . . . . . . . . . . . . . 8.303795-01 . . . . . . . . . . . . . . . . 6.33795-01A . . . . . . . . . . . . . . . 6.33795-01AN . . . . . . . . . . . . . 8.583795-01N . . . . . . . . . . . . . . 8.583795-04 . . . . . . . . . . . . . . . . 6.33795-04N . . . . . . . . . . . . . . 8.583795-06 . . . . . . . . . . . . . . . . 6.33795-06N . . . . . . . . . . . . . . 8.583795-08 . . . . . . . . . . . . . . . . 6.33795-08N . . . . . . . . . . . . . . 8.583795-14 . . . . . . . . . . . . . . . . 6.33795-14N . . . . . . . . . . . . . . 8.583795-16 . . . . . . . . . . . . . . . . 6.33795-16N . . . . . . . . . . . . . . 8.583795-18 . . . . . . . . . . . . . . . . 6.33795-18N . . . . . . . . . . . . . . 8.583795-20 . . . . . . . . . . . . . . . . 6.33795-20N . . . . . . . . . . . . . . 8.583795-22 . . . . . . . . . . . . . . . . 6.33795-22N . . . . . . . . . . . . . . 8.58
3795-24 . . . . . . . . . . . . . . . . 6.33795-24N . . . . . . . . . . . . . . 8.583795-28 . . . . . . . . . . . . . . . . 6.33795-28N . . . . . . . . . . . . . . 8.583795-50 . . . . . . . . . . . . 1.9, 6.13795-51 . . . . . . . . . . . . 1.9, 6.13795-54 . . . . . . . . . . . . 1.9, 6.14004-01 . . . . . . . . . . . . . . . 3.224004-02 . . . . . . . . . . . . . . . 3.224004-03 . . . . . . . . . . . . . . . 3.224004-03-3AN . . 8.21, 8.24, 8.374004-04 . . . . . . . . . . . . . . . 3.224004-05 . . . . . . . . . . . . . . . 3.224004-05N . . . . . . . . . . . . . . 8.274004-07 . . . . . . . . . . . . . . . 3.224004-07N . . . . . . . . . . . . . . 8.274004-17 . . . . . . . . . . . . . . . 3.224004-19 . . . . . . . . . . . . . . . 3.224004-23 . . . . . . . . . . . . . . . 3.224004-25 . . . . . . . . . . . . . . . 3.234004-27 . . . . . . . . . . . . . . . 3.234004-28 . . . . . . . . . . . . . . . 3.234004-29 . . . . . . . . . . . . . . . 3.234004-31 . . . . . . . . . . . . . . . 3.234004-35 . . . . . . . . . . . . . . . 3.234004-37 . . . . . . . . . . 3.18, 6.294004-37N . . . . . . . . . . . . . . 8.294004-039N . . . . . . . . . . . . . 8.314004-40 . . . . . . . . . . . . . . . 3.174004-42 . . . . . . . . . . . . . . . 3.174004-43 . . . . . . . . . . . . . . . 3.174004-43N . . . . . . . . . . . . . . 8.284004-043N . . . . . . . . . . . . . 8.314004-44 . . . . . . . . . . . . . . . 3.174004-45 . . . . . . . . . . . . . . . 3.174004-45A . . . . . . . . . . . . . . 3.174004-45N . . . . . . . . . . . . . . 8.284004-46 . . . . . . . . . . . . . . . 3.174004-47 . . . . . . . . . . . . . . . 3.174004-48 . . . . . . . . . . . . . . . 3.174004-50 . . . . . . . . . . . . . . . 3.174004-50A . . . . . . . . . . . . . . 3.174004-50B . . . . . . . . . . . . . . 3.17
ixviii
IND
EX
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
IND
EXCatalog Number Page Catalog Number Page
4004-52 . . . . . . . . . . . . . . . 3.174004-54 . . . . . . . . . . . . . . . 3.174004-56 . . . . . . . . . . . . . . . 3.194004-57 . . . . . . . . . . . . . . . 3.194004-59 . . . . . . . . . . . . . . . 3.194004-62 . . . . . . . . . . . . . . . 3.204004-63 . . . . . . . . . . . . . . . 3.204004-65 . . . . . . . . . . . . . . . 3.214004-76 . . . . . . . . . . . . . . . 3.154004-76N . . . . . . . . . . . . . . 8.264004-77 . . . . . . . . . . . . . . . 3.154004-77N . . . . . . . . . . . . . . 8.264004-79 . . . . . . . . . . . . . . . 3.154004-79-12 . . . . . . . . . . . . . 3.154004-80 . . . . . . . . . . . . . . . 3.214004-84 . . . . . . . . . . . . . . . 3.214004-86 . . . . . . . . . . . . . . . 3.214004-88 . . . . . . . . . . . . . . . 3.214004-90 . . . . . . . . . . . . . . . 3.214004-92 . . . . . . . . . . . . . . . 3.214004-94 . . . . . . . . . . . . . . . 3.214004-95 . . . . . . . . . . . . . . . 3.144004-95N . . . . . . . . . . . . . . 8.254004-96 . . . . . . . . . . . . . . . 3.144004-96N . . . . . . . . . . . . . . 8.254004-97 . . . . . . . . . . . . . . . 3.164004-97-3AN . . 8.21, 8.24, 8.374004-97A . . . . . . . . . . . . . . 3.164004-97AN . . . . . . . . . . . . . 8.244004-97N . . . . . . . . . . . . . . 8.244004-98 . . . . . . . . . . . . . . . 3.144004-99 . . . . . . . . . . . . . . . 3.144004-108 . . . . . . . . . . . . . . 3.244004-124 . . . . . . . . . . . . . . 3.244004-125 . . . . . . . . . . . . . . 3.244004-126N . . . . . . . . . . . . . 6.164004-127N . . . . . . . . . . . . . 6.164004-130N . . . . . . . . . . . . . 6.164004-134N . . . . . . . . . . . . . 6.164004-185 . . . . . . . . . . . . . . 6.144004-186 . . . . . . . . . . . . . . 6.144004-189 . . . . . . . . . . . . . . 6.144004-204 . . . . . . . . . . . . . . 3.14
4004-206 . . . . . . . . . . . . . . 3.144004-210 . . . . . . . . . . . . . . 3.144004-210N . . . . . . . . . . . . . 8.254004-212N . . . . . . . . . . . . . 8.254004-216 . . . . . . . . . . . . . . 3.124004-216N . . . . . . . . . . . . . 8.234004-217N . . . . . . . . . . . . . 8.234004-220 . . . . . . . . . . . . . . 3.124004-220N . . . . . . . . . . . . . 8.234004-221 . . . . . . . . . . . . . . 3.124004-221N . . . . . . . . . . . . . 8.234004-224 . . . . . . . . . 3.12, 6.294004-225 . . . . . . . . . . . . . . 3.124004-226 . . . . . . . . . . . . . . 3.124004-227 . . . . . . . . . . . . . . 3.124004-228 . . . . . . . . . . . . . . 3.124004-230 . . . . . . . . . . . . . . 3.164004-230N . . . . . . . . . . . . . 8.264004-232 . . . . . . . . . . . . . . 3.164004-232N . . . . . . . . . . . . . 8.264004-235 . . . . . . . . . . . . . . 3.144004-238 . . . . . . . . . . . . . . 3.154004-238N . . . . . . . . . . . . . 8.274004-239N . . . . . . . . . . . . . 8.274004-240 . . . . . . . . . . . . . . 3.154004-240N . . . . . . . . . . . . . 8.274004-242 . . . . . . . . . . . . . . 3.154004-244 . . . . . . . . . . . . . . 3.154004-244N . . . . . . . . . . . . . 8.274004-245N . . . . . . . . . . . . . 8.274004-246 . . . . . . . . . . . . . . 3.154004-246N . . . . . . . . . . . . . 8.274004-248 . . . . . . . . . . . . . . 3.154004-250 . . . . . . . . . . . . . . 3.134004-250N . . . . . . . . . . . . . 8.234004-251N . . . . . . . . . . . . . 8.234004-252 . . . . . . . . . . . . . . 3.134004-253 . . . . . . . . . . . . . . 3.134004-254 . . . . . . . . . . . . . . 3.134004-256 . . . . . . . . . . . . . . 3.134004-260 . . . . . . . . . . . . . . 3.144004-260N . . . . . . . . . . . . . 8.254004-261 . . . . . . . . . . . . . . 3.14
4004-261N . . . . . . . . . . . . . 8.254004-262 . . . . . . . . . . . . . . 3.144004-263 . . . . . . . . . . . . . . 3.144004-266 . . . . . . . . . . . . . . 3.184004-266N . . . . . . . . . . . . . 8.294004-268 . . . . . . . . . . . . . . 3.184004-268N . . . . . . . . . . . . . 8.294004-269 . . . . . . . . . . . . . . 3.184004-270 . . . . . . . . . . . . . . 3.164004-270N . . . . . . . . . . . . . 8.284004-272 . . . . . . . . . . . . . . 3.164004-280 . . . . . . . . . 3.13, 3.144004-280N . . . . . . . . . . . . . 8.244004-282 . . . . . . . . . 3.13, 3.144004-282N . . . . . . . . . . . . . 8.244004-305 . . . . . . . . . . . . . . 3.144004-320 . . . . . . . . . . . . . . 3.124004-330 . . . . . . . . . . . . . . 3.124004-346 . . . . . . . . . . . . . . 3.154004-346N . . . . . . . . . . . . . 8.274004-394 . . . . . . . . . . . . . . 3.244004-400N . . . . . . . . . . . . . 6.164004-401N . . . . . . . . . . . . . 6.164004-402N . . . . . . . . . . . . . 6.164004-405N . . . . . . . . . . . . . 6.164004-406N . . . . . . . . . . . . . 6.164004-407N . . . . . . . . . . . . . 6.164004-408N . . . . . . . . . . . . . 6.164004-409N . . . . . . . . . . . . . 6.164004-410N . . . . . . . . . . . . . 6.164004-411N . . . . . . . . . . . . . 6.164004-412N . . . . . . . . . . . . . 6.164004-415N . . . . . . . . . . . . . 6.164004-416N . . . . . . . . . . . . . 6.164155-06 . . . . . . . . . . . . . . . 4.244155-07 . . . . . . . . . . . . . . . 4.244157-77 . . . . . . . . . . . . . . . 4.244375-08 . . . . . . . . . . . . . . . 2.394375-09 . . . . . . . . . . . . . . . 2.394375-10 . . . . . . . . . . . . . . . 2.394375-11 . . . . . . . . . . . . . . . . 2.394375-12 . . . . . . . . . . . . . . . 2.394375-14 . . . . . . . . . . . . . . . 2.39
4377-08 . . . . . . . . . . 2.39, 6.274377-08N . . . . . . . . . 8.51, 8.564377-09 . . . . . . . . . . . . . . . 2.394377-11 . . . . . . . . . . . . . . . . 2.394377-12 . . . . . . . . . . . . . . . 2.394377-28 . . . . . . . . . . . . . . . 2.404377-30 . . . . . . . . . . . . . . . 2.404383-40 . . . . . . . . . . 2.12, 6.274383-40N . . . . . . . . . 8.51, 8.534383-42 . . . . . . . . . . 2.12, 6.274383-42N . . . . . . . . . 8.51, 8.534383-44 . . . . . . . . . . 2.12, 6.274383-44N . . . . . . . . . 8.51, 8.534383-46 . . . . . . . . . . 2.12, 6.274383-46N . . . . . . . . . 8.51, 8.534384-40 . . . . . . . . . . 2.12, 6.274384-40N . . . . . . . . . 8.51, 8.534384-42 . . . . . . . . . . 2.12, 6.274384-42N . . . . . . . . . 8.51, 8.534384-44 . . . . . . . . . . 2.12, 6.274384-44N . . . . . . . . . 8.51, 8.534384-46 . . . . . . . . . . 2.12, 6.274384-46N . . . . . . . . . 8.51, 8.534385-40 . . . . . . . . . . 2.12, 6.27 4385-40N . . . . . . . . . 8.51, 8.534385-42 . . . . . . . . . . 2.12, 6.274385-42N . . . . . . . . . 8.51, 8.534385-44 . . . . . . . . . . 2.12, 6.274385-44N . . . . . . . . . 8.51, 8.534385-46 . . . . . . . . . . 2.12, 6.274385-46N . . . . . . . . . 8.51, 8.534447-07 . . . . . . . . . . . . . . . 2.384447-09 . . . . . . . . . . . . . . . 2.384545-09 . . . . . . . . . . . . . . . 2.414635-06 . . . . . . . . . . . . . . . 2.415005-00 . . . . . . . . . . . . . . . 2.325005-001 . . . . . . . . . . . . . . 2.325005-01 . . . . . . . . . . . . . . . 2.335005-02 . . . . . . . . . . . . . . . 2.335005-03 . . . . . . . . . . . . . . . 2.335005-05 . . . . . . . . . . . . . . . 2.335005-13 . . . . . . . . . . . . . . . 2.355005-15 . . . . . . . . . . . . . . . 2.35
5005-23 . . . . . . . . . . . . . . . 2.355005-25 . . . . . . . . . . . . . . . 2.355005-33 . . . . . . . . . . . . . . . 2.355005-35 . . . . . . . . . . . . . . . 2.355005-37 . . . . . . . . . . . . . . . 2.355005-39 . . . . . . . . . . . . . . . 2.355005-43 . . . . . . . . . . . . . . . 2.365005-45 . . . . . . . . . . . . . . . 2.365005-47 . . . . . . . . . . . . . . . 2.375005-49 . . . . . . . . . . . . . . . 2.375005-51 . . . . . . . . . . . . . . . 2.375005-53 . . . . . . . . . . . . . . . 2.375005-60 . . . . . . . . . . . . . . . 2.325005-62 . . . . . . . . . . . . . . . 2.325005-64 . . . . . . . . . . . . . . . 2.325005-80 . . . . . . . . . . 2.31, 6.315005-82 . . . . . . . . . . 2.33, 6.315005-86 . . . . . . . . . . 2.34, 6.315005-88 . . . . . . . . . . 2.34, 6.316006-02 . . . . . . . . . . . . . . . 4.256006-04 . . . . . . . . . . . . . . . 4.256006-05 . . . . . . . . . . . . . . . 4.306006-08 . . . . . . . . . . . . . . . 4.276006-10 . . . . . . . . . . . . . . . 4.276006-12 . . . . . . . . . . . . . . . 4.276006-14 . . . . . . . . . . . . . . . 4.276006-15 . . . . . . . . . . . . . . . 4.296006-16 . . . . . . . . . . . . . . . 4.296006-17 . . . . . . . . . . . . . . . 4.276006-19 . . . . . . . . . . . . . . . 4.276006-20 . . . . . . . . . . . . . . . 4.266006-24 . . . . . . . . . . . . . . . 4.266006-28 . . . . . . . . . . . . . . . 4.266006-29 . . . . . . . . . . . . . . . 4.256006-32 . . . . . . . . . . . . . . . 4.266006-33 . . . . . . . . . . . . . . . 4.256006-36 . . . . . . . . . . . . . . . 4.266006-37 . . . . . . . . . . . . . . . 4.256006-40 . . . . . . . . . . . . . . . 4.266006-41 . . . . . . . . . . . . . . . 4.256006-44 . . . . . . . . . . . . . . . 4.156006-44N . . . . . . . . . . . . . . 8.326006-45N . . . . . . . . . . . . . . 8.32
6006-46N . . . . . . . . . . . . . . 8.326006-47N . . . . . . . . . . . . . . 8.326006-48 . . . . . . . . . . . . . . . 4.146006-50 . . . . . . . . . . . . . . . 4.156006-50N . . . . . . . . . . . . . . 8.326006-52 . . . . . . . . . . . . . . . 4.156006-52N . . . . . . . . . . . . . . 8.326006-54 . . . . . . . . . . . . . . . 4.156006-54N . . . . . . . . . . . . . . 8.326006-56 . . . . . . . . . . . . . . . 4.156006-56-3N . . . . . . . . 8.21, 8.376006-56N . . . . . . . . . . . . . . 8.326006-58 . . . . . . . . . . . . . . . 4.206006-59 . . . . . . . . . . . . . . . 4.166006-59N . . . . . . . . . . . . . . 8.336006-61 . . . . . . . . . . . . . . . 4.166006-61N . . . . . . . . . . . . . . 8.336006-62 . . . . . . . . . . . . . . . 4.206006-63 . . . . . . . . . . . . . . . 4.166006-63N . . . . . . . . . . . . . . 8.336006-65N . . . . . . . . . . . . . . 8.336006-70 . . . . . . . . . . . . . . . 4.206006-72 . . . . . . . . . . . . . . . 4.206006-82 . . . . . . . . . . . . . . . 4.166006-82N . . . . . . . . . . . . . . 8.336006-84 . . . . . . . . . . . . . . . 4.166006-84N . . . . . . . . . . . . . . 8.336006-86 . . . . . . . . . . . . . . . 4.166006-86N . . . . . . . . . . . . . . 8.336006-88 . . . . . . . . . . . . . . . 4.166006-88N . . . . . . . . . . . . . . 8.336006-90 . . . . . . . . . . . . . . . 4.216006-92 . . . . . . . . . . . . . . . 4.216006-94 . . . . . . . . . . . . . . . 4.216006-100 . . . . . . . . . . . . . . 4.226006-102 . . . . . . . . . . . . . . 4.226006-104 . . . . . . . . . . . . . . 4.226006-108 . . . . . . . . . . . . . . 4.216006-110 . . . . . . . . . . . . . . . 4.216006-112 . . . . . . . . . . . . . . . 4.216006-120 . . . . . . . . . . . . . . 4.176006-121 . . . . . . . . . . . . . . 4.176006-121N . . . . . . . . . . . . . 8.34
xix
IND
EX
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
IND
EXCatalog Number Page Catalog Number Page
6006-122 . . . . . . . . . . . . . . 4.176006-123 . . . . . . . . . . . . . . 4.176006-123N . . . . . . . . . . . . . 8.346006-124 . . . . . . . . . . . . . . 4.176006-125 . . . . . . . . . . . . . . 4.176006-125N . . . . . . . . . . . . . 8.346006-127 . . . . . . . . . . . . . . 4.176006-127N . . . . . . . . . . . . . 8.346006-128 . . . . . . . . . . . . . . 4.186006-129 . . . . . . . . . . . . . . 4.186006-130 . . . . . . . . . . . . . . 4.186006-131 . . . . . . . . . . . . . . 4.186006-132 . . . . . . . . . . . . . . 4.186006-133 . . . . . . . . . . . . . . 4.186006-139 . . . . . . . . . . . . . . 4.146006-148 . . . . . . . . . . . . . . 4.236006-152 . . . . . . . . . . . . . . 4.236006-158 . . . . . . . . . . . . . . 4.216006-159 . . . . . . . . . . . . . . 4.216006-160 . . . . . . . . . . . . . . 4.216006-170 . . . . . . . . . . . . . . 4.226006-174 . . . . . . . . . . . . . . 4.226006-310 . . . . . . . . . . . . . . 4.196006-330 . . . . . . . . . . . . . . 4.196006-334 . . . . . . . . . . . . . . 4.196006-340 . . . . . . . . . . . . . . 4.196006-610 . . . . . . . . . . . . . . 4.286006-620 . . . . . . . . . . . . . . 4.286006-630 . . . . . . . . . . . . . . 4.287007-02 . . . . . . . . . . . . . . . 5.247007-06 . . . . . . . . . . 5.24, 5.267007-25 . . . . . . . . . . . . . . . 5.207007-26 . . . . . . . . . . . . . . . 5.207007-27 . . . . . . . . . . . . . . . 5.207007-28 . . . . . . . . . . . . . . . 5.207007-30 . . . . . . . . . . . . . . . 5.217007-32 . . . . . . . . . . . . . . . 5.217007-33 . . . . . . . . . . . . . . . 5.217007-34 . . . . . . . . . . . . . . . 5.217007-35 . . . . . . . . . . . . . . . 5.217007-40 . . . . . . . . . . . . . . . 5.187007-40-5 . . . . . . . . . . . . . . 5.187007-42 . . . . . . . . . . . . . . . 5.18
7007-42-5 . . . . . . . . . . . . . . 5.187007-44 . . . . . . . . . . . . . . . 5.187007-44-5 . . . . . . . . . . . . . . 5.187007-46 . . . . . . . . . . . . . . . 5.187007-46-5 . . . . . . . . . . . . . . 5.187007-48 . . . . . . . . . . . . . . . 5.187007-48-5 . . . . . . . . . . . . . . 5.187007-50 . . . . . . . . . . . . . . . 5.197007-50-5 . . . . . . . . . . . . . . 5.197007-56 . . . . . . . . . . . . . . . 5.297007-58 . . . . . . . . . . 5.26, 5.297007-60 . . . . . . . . . . . . . . . 5.297007-62 . . . . . . . . . . . . . . . 5.297007-64 . . . . . . . . . . 5.26, 5.297007-76 . . . . . . . . . . . . . . . 5.227007-78 . . . . . . . . . . . . . . . 5.227007-104 . . . . . . . . . . . . . . . 5.57007-105 . . . . . . . . . . . . . . . 5.57007-106 . . . . . . . . . . . . . . . 5.57007-108 . . . . . . . . . . . . . . . 5.57007-110 . . . . . . . . . . . . . . . . 5.57007-112 . . . . . . . . . . . . . . . 5.167007-116 . . . . . . . . . . . . . . . 5.167007-120 . . . . . . . . . . . . . . 5.167007-120N . . . . . . . . . . . . . 8.457007-124 . . . . . . . . . . . . . . 5.167007-124N . . . . . . . . . . . . . 8.457007-126 . . . . . . . . . . . . . . 5.167007-128 . . . . . . . . . . . . . . . 5.57007-128N . . . . . . . . . . . . . 8.457007-130 . . . . . . . . . . . . . . . 5.57007-130N . . . . . . . . . . . . . 8.457007-132N . . . . . . . . . . . . . 8.457007-134 . . . . . . . . . . . . . . . 5.57007-134N . . . . . . . . . . . . . 8.457007-140 . . . . . . . . . . . . . . 5.157007-140N . . . . 8.21, 8.37, 8.457007-167 . . . . . . . . . . . . . . 5.147007-168 . . . . . . . . . . . . . . 5.147007-200 . . . . . . . . . . . . . . 5.237007-200SC . . . . . . . . . . . . 5.237007-202 . . . . . . . . . . . . . . 5.237007-202SC . . . . . . . . . . . . 5.23
7007-204 . . . . . . . . . . . . . . 5.347007-204SC . . . . . . . . . . . . 5.347007-205SC . . . . . . . . . . . . 5.347007-206 . . . . . . . . . . . . . . 5.347007-206SC . . . . . . . . . . . . 5.347007-207SC . . . . . . . . . . . . 5.347007-208SC . . . . . . . . . . . . 5.257007-210 . . . . . . . . . . . . . . 5.257007-210SC . . . . . . . . . . . . 5.257007-211 . . . . . . . . . . . . . . . 5.257007-211SC . . . . . . . 5.25, 6.26 7007-211SCN . . . . . . 8.42, 8.507007-214 . . . . . . . . . . . . . . 5.337007-214SC . . . . . . . . . . . . 5.337007-215-2 . . . . . . . . . . . . . 5.277007-215-2SC . . . . . 5.27, 5.337007-216 . . . . . . . . . . . . . . 5.337007-216-1 . . . . . . . . . . . . . 5.337007-216-1SC . . . . . . . . . . 5.337007-216-2 . . . . . . . . 5.27, 5.337007-216-2SC . . . . . 5.27, 5.337007-216SC . . . . . . . . . . . . 5.337007-216SCN . . . . . . . . . . . 8.427007-217SC . . . . . . . . . . . . 5.337007-218 . . . . . . . . . . . . . . 5.337007-218-1 . . . . . . . . . . . . . 5.337007-218-1SC . . . . . . . . . . 5.337007-218-2 . . . . . . . . 5.27, 5.337007-218-2SC . . . . . 5.27, 5.337007-218-3SC . . . . . 5.33, 6.26 7007-218-3SCN . . . . 8.42, 8.507007-218SC . . . . . . . . . . . . 5.337007-218SCN . . . . . . . . . . . 8.427007-219SC . . . . . . . . . . . . 5.337007-220 . . . . . . . . . . . . . . 5.337007-220-1 . . . . . . . . . . . . . 5.337007-220-1SC . . . . . . . . . . 5.337007-220-2SC . . . . . 5.27, 5.337007-220SC . . . . . . . . . . . . 5.337007-221SC . . . . . . . . . . . . 5.337007-222 . . . . . . . . . . . . . . 5.337007-222-1 . . . . . . . . . . . . . 5.337007-222-1SC . . . . . . . . . . 5.33
7007-222-2SC . . . . . 5.27, 5.337007-222SC . . . . . . . . . . . . 5.337007-223-2SC . . . . . 5.27, 5.337007-224 . . . . . . . . . . . . . . 5.337007-224-1SC . . . . . . . . . . 5.337007-224-2SC . . . . . 5.27, 5.337007-224SC . . . . . . . . . . . . 5.337007-226-1SC . . . . . . . . . . 5.337007-226SC . . . . . . . . . . . . 5.337007-230SC . . . . . . . . . . . . 5.337007-232SC . . . . . . . . . . . . 5.317007-236 . . . . . . . . . . . . . . 5.317007-236SC . . . . . . . . . . . . 5.317007-237 . . . . . . . . . . . . . . 5.317007-237SC . . . . . . . . . . . . 5.317007-242 . . . . . . . . . . . . . . 5.317007-242SC . . . . . . . . . . . . 5.317007-250 . . . . . . . . . . . . . . 5.177007-250-5 . . . . . . . . . . . . . 5.177007-250-5SC . . . . . . . . . . 5.177007-250SC . . . . . . . . . . . . 5.177007-252 . . . . . . . . . . . . . . 5.177007-252-5 . . . . . . . . . . . . . 5.177007-252-5SC . . . . . . . . . . 5.177007-252SC . . . . . . . . . . . . 5.177007-252SCN . . . . . . 8.41, 8.527007-254 . . . . . . . . . . . . . . 5.177007-254-5 . . . . . . . . . . . . . 5.177007-254-5SC . . . . . . . . . . 5.177007-254SC . . . . . . . 5.17, 6.26 7007-254SCN . . 8.41, 8.50, 8.527007-256 . . . . . . . . . . . . . . 5.177007-256-5 . . . . . . . . . . . . . 5.177007-256-5SC . . . . . . . . . . 5.177007-256SC . . . . . . . . . . . . 5.177007-256SCN . . . . . . 8.41, 8.527007-258 . . . . . . . . . . . . . . 5.177007-258-5 . . . . . . . . . . . . . 5.177007-258-5SC . . . . . . . . . . 5.177007-258SC . . . . . . . . . . . . 5.177007-260 . . . . . . . . . . . . . . 5.197007-260-5 . . . . . . . . . . . . . 5.197007-260-5SC . . . . . . . . . . 5.19
7007-260SC . . . . . . . . . . . . 5.197007-262SC . . . 5.28, 6.21, 6.257007-263SC . . . . . . . 5.26, 5.287007-264 . . . . . . . . . 5.26, 5.287007-264SC . . . . . . . 5.26, 5.287007-264SCN . . . . . . . . . . . 8.397007-266SC . . . . . . . . . . . . 5.287007-266SCN . . . . . . . . . . . 8.407007-268 . . . . . . . . . . . . . . 5.287007-268SC . . . . . . . . . . . . 5.287007-268SCN . . . . . . . . . . . 8.407007-270SC . . . . . . . . . . . . 5.247007-272SC . . . . . . . . . . . . 5.247007-274 . . . . . . . . . . . . . . 5.247007-274SC . . . . . . . . . . . . 5.247007-276SC . . . . . . . . . . . . 5.247007-278 . . . . . . . . . . . . . . 5.247007-278SC . . . . . . . . . . . . 5.247007-280SC . . . . . . . . . . . . 5.247007-282SC . . . . . . . . . . . . 5.237007-284SC . . . . . . . . . . . . 5.237007-286 . . . . . . . . . . . . . . 5.237007-286SC . . . . . . . . . . . . 5.237007-288SC . . . . . . . . . . . . 5.237007-292SC . . . . . . . . . . . . 5.307007-294 . . . . . . . . . . . . . . 5.307007-294SC . . . . . . . . . . . . 5.307007-295 . . . . . . . . . . . . . . 5.307007-295SC . . . . . . . . . . . . 5.307007-296SC . . . . . . . 5.26, 5.287007-298SC . . . . . . . . . . . . 5.287007-300 . . . . . . . . . . . . . . 5.287007-300SC . . . . . . . . . . . . 5.287007-302SC . . . . . . . . . . . . 5.357007-304SC . . . . . . . . . . . . 5.357007-306SC . . . . . . . . . . . . 5.357007-313 . . . . . . . . . . . . . . 5.257007-313SC . . . . . . . . . . . . 5.257007-313SCN . . . . . . . . . . . 8.427007-315 . . . . . . . . . . . . . . 5.257007-315SC . . . . . . . . . . . . 5.257007-315SCN . . . . . . . . . . . 8.427007-320 . . . . . . . . . . . . . . 5.21
7007-320SC . . . . . . . 5.21, 6.267007-320SCN . . 8.41, 8.50, 8.527007-401N . . . . . . . . . . . . . 8.467007-402N . . . . . . . . . . . . . 8.467007-403N . . . . . . . . . . . . . 8.467007-404N . . . . . . . . . . . . . 8.467007-410 . . . . . . . . . . . . . . . 5.67007-411 . . . . . . . . . . . . . . . . 5.67007-412 . . . . . . . . . . . . . . . 5.67007-413 . . . . . . . . . . . . . . . 5.67007-414 . . . . . . . . . . . . . . . 5.67007-415 . . . . . . . . . . . . . . . 5.67007-416 . . . . . . . . . . . . . . . 5.67007-417 . . . . . . . . . . . . . . . 5.67007-418 . . . . . . . . . . . . . . . 5.67007-419 . . . . . . . . . . . . . . . 5.67007-420 . . . . . . . . . . . . . . . 5.17007-421 . . . . . . . . . . . . . . . 5.17007-422 . . . . . . . . . . . . . . . 5.17007-423 . . . . . . . . . . . . . . . 5.17007-424 . . . . . . . . . . . . . . . 5.17007-425 . . . . . . . . . . . . . . . 5.17007-426 . . . . . . . . . . . . . . . 5.17007-427 . . . . . . . . . . . . . . . 5.17007-428 . . . . . . . . . . . . . . . 5.17007-429 . . . . . . . . . . . . . . . 5.17007-440 . . . . . . . . . . . . . . . 5.87007-440-8 . . . . . . . . . . 1.1, 5.97007-442 . . . . . . . . . . . . . . . 5.87007-442-8 . . . . . . . . . . 1.1, 5.97007-444 . . . . . . . . . . . . . . . 5.87007-444-8 . . . . . . . . . . 1.1, 5.97007-446 . . . . . . . . . . . . . . . 5.87007-446-8 . . . . . . . . . . 1.1, 5.97007-448 . . . . . . . . . . . . . . . 5.87007-449 . . . . . . . . . . . . . . . 5.87007-449-8 . . . . . . . . . . 1.1, 5.97007-450 . . . . . . . . . . . . . . 5.107007-452 . . . . . . . . . . . . . . 5.107007-453 . . . . . . . . . . . . . . 5.107007-454 . . . . . . . . . . . . . . 5.107007-456 . . . . . . . . . . . . . . 5.107007-458 . . . . . . . . . . . . . . 5.10
xiiixii
IND
EX
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
IND
EXCatalog Number Page Catalog Number Page
7007-460 . . . . . . . . . . . . . . . 5.27007-462 . . . . . . . . . . . . . . . 5.27007-464 . . . . . . . . . . . . . . . 5.27007-466 . . . . . . . . . . . . . . . 5.27007-468 . . . . . . . . . . . . . . . 5.27007-470 . . . . . . . . . . . . . . 5.157007-479 . . . . . . . . . . . . . . 5.117007-481 . . . . . . . . . . . . . . 5.117007-483 . . . . . . . . . . . . . . 5.117007-485 . . . . . . . . . . . . . . 5.117007-487 . . . . . . . . . . . . . . 5.117007-490 . . . . . . . . . . . . . . . 5.37007-490-8 . . . . . . . . . . 1.2, 5.47007-492 . . . . . . . . . . . . . . . 5.37007-492-8 . . . . . . . . . . 1.2, 5.47007-494 . . . . . . . . . . . . . . . 5.37007-494-8 . . . . . . . . . . 1.2, 5.47007-496 . . . . . . . . . . . . . . . 5.37007-496-8 . . . . . . . . . . 1.2, 5.47007-498 . . . . . . . . . . . . . . . 5.37007-499 . . . . . . . . . . . . . . . 5.37007-499-8 . . . . . . . . . . 1.2, 5.47007-506 . . . . . . . . . 5.12, 6.257007-507 . . . . . . . . . 5.12, 6.257007-508N . . . . . . . . . . . . . 8.477007-509N . . . . . . . . . . . . . 8.477007-510N . . . . . . . . . . . . . 8.477007-511N . . . . . . . . . . . . . 8.477007-511 . . . . . . . . . . 5.13, 6.217007-514 . . . . . . . . . 5.13, 6.237007-521 . . . . . . . . . 5.13, 6.217007-522 . . . . . . . . . 5.13, 6.237007-538N . . . . . . . . . . . . . 8.477007-539N . . . . . . . . . . . . . 8.477007-540 . . . . . . . . . . . . . . . 5.77007-540N . . . . . . . . . . . . . 8.467007-542 . . . . . . . . . . . . . . . 5.77007-542N . . . . . . . . . . . . . 8.467007-544 . . . . . . . . . . . . . . . 5.77007-544N . . . . . . . . . . . . . 8.467007-546 . . . . . . . . . . . . . . . 5.77007-546N . . . . . . . . . . . . . 8.467007-548 . . . . . . . . . . . . . . . 5.7
7007-548N . . . . . . . . . . . . . 8.467007-590 . . . . . . . . . . . . . . . 5.27007-590N . . . . . . . . . . . . . 8.467007-592 . . . . . . . . . . . . . . . 5.27007-592N . . . . . . . . . . . . . 8.467007-594 . . . . . . . . . . . . . . . 5.27007-594N . . . . . . . . . . . . . 8.467007-596 . . . . . . . . . . . . . . . 5.27007-596N . . . . . . . . . . . . . 8.467007-598 . . . . . . . . . . . . . . . 5.27007-598N . . . . . . . . . . . . . 8.467007-84 . . . . . . . . . . . . . . . 5.328008-02 . . . . . . . . . . . . . . . 6.178008-04 . . . . . . . . . . . . . . . 6.178008-06 . . . . . . . . . . . . . . . 6.178008-10 . . . . . . . . . . . . . . . 6.178008-11 . . . . . . . . . . . . . . . . 6.178008-12 . . . . . . . . . . . . . . . 5.368008-14 . . . . . . . . . . . . . . . 5.368008-15 . . . . . . . . . . . . . . . 5.368008-41 . . . . . . . . . . . . . . . 6.198008-42 . . . . . . . . . . . . . . . 6.198008-43 . . . . . . . . . . . . . . . 6.188008-45 . . . . . . . . . . . . . . . 6.198008-47 . . . . . . . . . . . . . . . 6.198008-62 . . . . . . . . . . .6.29, 9.118008-66 . . . . . . . . . . . . . . . 9.118008-81N . . . . . . . . . . . . . . . 8.48008-230 . . . . . . . . . 6.14, 6.318008-232 . . . . . . . . . 6.14, 6.318008-236 . . . . . . . . . 6.14, 6.318008-400 . . . . . . . . . . . . . . . 6.88008-405 . . . . . . . . . . . . . . . 6.88008-410 . . . . . . . . . . . . . . . 6.98008-420 . . . . . . . . . . . . . . . 6.98008-420-4 . . . . . . . . . . . . . . 6.98008-430 . . . . . . . . . . . . . . . 6.98008-432 . . . . . . . . . . . . . . . 6.98008-448A . . . . . . . . . 1.4, 6.108008-448B . . . . . . . . . 1.4, 6.108008-448C . . . . . . . . . 1.4, 6.108008-449A . . . . . . . . . 1.4, 6.108008-449B . . . . . . . . . 1.4, 6.10
8008-449C . . . . . . . . . 1.4, 6.108008-452 . . . . . . . . . . 1.4, 6.108008-454 . . . . . . . . . . 1.4, 6.108008-456 . . . . . . . . . . 1.4, 6.108008-458 . . . . . . . . . . 1.4, 6.108008-460 . . . . . . . . . . 1.4, 6.108008-462 . . . . . . . . . . 1.4, 6.108008-464 . . . . . . . . . . 1.4, 6.108008-466 . . . . . . . . . . 1.4, 6.108008-468 . . . . . . . . . . 1.4, 6.108008-472 . . . . . . . . . . 1.4, 6.108008-474 . . . . . . . . . . 1.4, 6.108008-476 . . . . . . . . . . 1.4, 6.108008-478 . . . . . . . . . . 1.4, 6.108008-480 . . . . . . . . . . 1.4, 6.108008-482 . . . . . . . . . . 1.4, 6.108008-484 . . . . . . . . . . 1.4, 6.108008-486 . . . . . . . . . . 1.4, 6.108008-488 . . . . . . . . . . 1.4, 6.108008-493 . . . . . . . . . . 1.4, 6.108008-494 . . . . . . . . . . 1.4, 6.108008-495 . . . . . . . . . . 1.4, 6.109009-10 . . . . . . . . . . . . . . . 10.39009-12 . . . . . . . . . . . . . . . 10.39009-13 . . . . . . . . . . . . . . . 10.29009-14 . . . . . . . . . . . . . . . 10.29009-15 . . . . . . . . . . . . . . . 10.29009-16 . . . . . . . . . . . . . . . 10.39009-18 . . . . . . . . . . . . . . . 10.39009-20 . . . . . . . . . . . . . . . 10.39009-21 . . . . . . . . . . . . . . . 10.39009-22 . . . . . . . . . . . . . . . 10.39009-23 . . . . . . . . . . . . . . . 10.39009-24 . . . . . . . . . . . . . . . 10.29009-26 . . . . . . . . . . . . . . . 10.39009-48 . . . . . . . . . . . . . . . 6.119009-48A . . . . . . . . . . . . . . 6.119009-48B . . . . . . . . . . . . . . 6.119009-48C . . . . . . . . . . . . . . 6.119009-49 . . . . . . . . . . . . . . . 6.119009-49A . . . . . . . . . . . . . . 6.119009-49B . . . . . . . . . . . . . . 6.119009-49C . . . . . . . . . . . . . . 6.11
9009-50 . . . . . . . . . . . . . . . 6.119009-52 . . . . . . . . . . . . . . . 6.119009-54 . . . . . . . . . . . . . . . 6.119009-56 . . . . . . . . . . . . . . . 6.119009-58 . . . . . . . . . . . . . . . 6.119009-60 . . . . . . . . . . . . . . . 6.119009-62 . . . . . . . . . . . . . . . 6.119009-64 . . . . . . . . . . . . . . . 6.119009-66 . . . . . . . . . . . . . . . 6.119009-68 . . . . . . . . . . . . . . . 6.119009-70 . . . . . . . . . . . . . . . 6.119009-72 . . . . . . . . . . . . . . . 6.119009-74 . . . . . . . . . . . . . . . 6.119009-76 . . . . . . . . . . . . . . . 6.119009-78 . . . . . . . . . . . . . . . 6.119009-80 . . . . . . . . . . . . . . . 6.119009-82 . . . . . . . . . . . . . . . 6.119009-84 . . . . . . . . . . . . . . . 6.119009-86 . . . . . . . . . . . . . . . 6.119009-88 . . . . . . . . . . . . . . . 6.119009-92 . . . . . . . . . . . . . . . 6.119009-93 . . . . . . . . . . . . . . . 6.119009-94 . . . . . . . . . . . . . . . 6.119009-95 . . . . . . . . . . . . . . . 6.119009-100N . . . . . . . . . . . . . 8.619009-104N . . . . . . . . . . . . . 8.619009-106N . . . . . . . . . . . . . 8.619009-110N . . . . . . . . . . . . . 8.619009-120 . . . . . . . . . . . . . . 6.159009-121 . . . . . . . . . . . . . . 6.159009-122 . . . . . . . . . . . . . . 6.159009-123 . . . . . . . . . . . . . . 6.159009-126 . . . . . . . . . . . . . . 5.369009-128 . . . . . . . . . . . . . . 5.369009-142 . . . . . . . . . 6.12, 6.299009-144 . . . . . . . . . . . . . . 6.299009-144N . . . . 8.51, 8.57, 8.619009-146 . . . . . . . . . . . . . . 6.299009-146N . . . . 8.51, 8.57, 8.619009-148 . . . . . 2.31, 6.27, 6.299009-148N . . . . . . . . 8.51, 8.569009-150 . . . . . . . . . 6.12, 6.299009-152 . . . . . . . . . 6.12, 6.29
9009-222 . . . . . . . . . . . . . . 7.119009-223 . . . . . . . . . . . . . . 7.119009-226 . . . . . . . . . . . . . . . 7.99009-227 . . . . . . . . . . . 1.6, 7.89009-228 . . . . . . . . . . . 1.6, 7.89009-240 . . . . . . . . . . . . . . . 7.29009-270 . . . . . . . . . . . . . . . 7.79009-280 . . . . . . . . . . . . . . . 7.69009-300 . . . . . . . . . . 1.5, 7.259009-301 . . . . . . . . . . 1.5, 7.259009-310 . . . . . . . . . . 1.5, 7.259009-311 . . . . . . . . . . . 1.5, 7.259009-360N . . . . . . . . . . . . . . 8.29009-364N . . . . . . . . . . . . . . 8.29009-380N . . . . . . . . . . . . . . 8.29009-395 . . . . . . . 1.8, 6.2, 7.289009-420 . . . . . . . . . . . . . . 7.139009-422 . . . . . . . . . . . . . . 7.139009-506 . . . . . . . . . . . . . . 10.59009-506A . . . . . . . . . . . . . 10.59009-510 . . . . . . . . . . . . . . 7.129009-511 . . . . . . . . . . . . . . . 7.129009-512 . . . . . . . . . . . . . . 7.129009-513 . . . . . . . . . . . . . . 7.129009-516 . . . . . . . . . . . . . . 7.129009-517 . . . . . . . . . . . . . . 7.129009-520 . . . . . . . . . . . . . . 7.129009-521 . . . . . . . . . . . . . . 7.129009-522 . . . . . . . . . . . . . . 7.129009-523 . . . . . . . . . . . . . . 7.129009-524 . . . . . . . . . . . . . . 7.129009-525 . . . . . . . . . . . . . . 7.129009-540 . . . . . . . . . . . . . . 7.149009-541 . . . . . . . . . . . . . . 7.149009-542 . . . . . . . . . . . . . . 7.149009-543 . . . . . . . . . . . . . . 7.149009-550 . . . . . . . . . . . . . . 7.149009-551 . . . . . . . . . . . . . . 7.149009-552 . . . . . . . . . . . . . . 7.149009-553 . . . . . . . . . . . . . . 7.149009-560 . . . . . . . . . . . . . . 7.159009-561 . . . . . . . . . . . . . . 7.159009-562 . . . . . . . . . . . . . . 7.15
9009-563 . . . . . . . . . . . . . . 7.159009-570 . . . . . . . . . . . . . . 7.159009-571 . . . . . . . . . . . . . . 7.159009-572 . . . . . . . . . . . . . . 7.159009-573 . . . . . . . . . . . . . . 7.159009-618 . . . . . . . . . . . . . . 7.179009-640 . . . . . . . . . . . . . . 7.189009-642 . . . . . . . . . . . . . . 7.189009-648 . . . . . . . . . . . . . . 7.169009-650 . . . . . . . . . . . . . . 7.169009-716SC . . . . . . . . . . . . 7.209009-716SCN . . . . . . . . . . . . 8.29009-718SCN . . . . . . . . . . . . 8.29009-738SC . . . . . . . . . . . . 7.209009-816 . . . . . . . . . . . . . . 7.289009-820 . . . . . . . . . . . . . . 7.289009-827-11 . . . . . . . . . . . . 7.279009-827-12 . . . . . . . . . . . . 7.279009-828 . . . . . . . . . . . . . . 7.279009-828-16 . . . . . . . . . . . . 7.279009-838SC . . . . . . . . . . . . 7.269009-840SC . . . . . . . . . . . . 7.269009-842SC . . . . . . . . . . . . 7.269009-900 . . . . . . . . . . . . . . 7.229009-901 . . . . . . . . . . . . . . 7.229009-905 . . . . . . . . . . . . . . 7.229009-908 . . . . . . . . . . . . . . 7.239009-909 . . . . . . . . . . . . . . 7.239009-910 . . . . . . . . . . . . . . 7.239009-911 . . . . . . . . . . . . . . . 7.239009-914 . . . . . . . . . . . . . . 7.249009-915 . . . . . . . . . . . . . . 7.249009-916 . . . . . . . . . . . . . . 7.249009-917 . . . . . . . . . . . . . . 7.249009-920 . . . . . . . . . . . . . . 7.229009-921 . . . . . . . . . . . . . . 7.229009-922 . . . . . . . . . . . . . . 7.229009-928 . . . . . . . . . . . . . . . 6.69009-928N . . . . . . . . . . . . . 8.499009-929N . . . . . . . . . . . . . 8.499009-930 . . . . . . . . . . . . . . . 6.69009-930N . . . . . . . . . . . . . 8.499009-934 . . . . . . . . . . . . . . . 6.6
IND
EX
xiv
IND
EX
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
Catalog Number Page
9009-934N . . . . . . . . . . . . . 8.499009-940 . . . . . . . . . . . . . . . 6.69009-940N . . . . . . . . . . . . . 8.489009-941 . . . . . . . . . . . . . . . 6.79009-941N . . . . . . . . . . . . . 8.499009-942 . . . . . . . . . . . . . . . 6.79009-942N . . . . . . . . . . . . . 8.499009-943 . . . . . . . . . . . . . . . 6.79009-943N . . . . . . . . . . . . . 8.499009-944 . . . . . . . . . . . . . . . 6.79009-944N . . . . . . . . . . . . . 8.499009-945 . . . . . . . . . . . . . . . 6.79009-945N . . . . . . . . . . . . . 8.499009-947 . . . . . . . . . . . . . . . 6.79009-947N . . . . . . . . . . . . . 8.499009-949 . . . . . . . . . . . . . . . 6.79009-949N . . . . . . . . . . . . . 8.499009-950N . . . . . . . . . . . . . 8.489009-951N . . . . . . . . . . . . . 8.499009-952N . . . . . . . . . . . . . 8.499009-953N . . . . . . . . . . . . . 8.499009-954N . . . . . . . . . . . . . 8.499009-955N . . . . . . . . . . . . . 8.499009-957N . . . . . . . . . . . . . 8.499009-959N . . . . . . . . . . . . . 8.499009-960 . . . . . . . . . . . . . . . 6.69009-960N . . . . . . . . . . . . . 8.489009-961 . . . . . . . . . . . . . . . 6.79009-961N . . . . . . . . . . . . . 8.499009-962 . . . . . . . . . . . . . . . 6.79009-962N . . . . . . . . . . . . . 8.499009-963 . . . . . . . . . . . . . . . 6.79009-963N . . . . . . . . . . . . . 8.499009-964 . . . . . . . . . . . . . . . 6.79009-964N . . . . . . . . . . . . . 8.499009-965 . . . . . . . . . . . . . . . 6.79009-965N . . . . . . . . . . . . . 8.499009-967 . . . . . . . . . . . . . . . 6.79009-967N . . . . . . . . . . . . . 8.499009-969 . . . . . . . . . . . . . . . 6.79009-969N . . . . . . . . . . . . . 8.499009-970 . . . . . . . . . . . . . . . 6.69009-970N . . . . . . . . . . . . . 8.48
9009-971N . . . . . . . . . . . . . 8.499009-972N . . . . . . . . . . . . . 8.499009-973N . . . . . . . . . . . . . 8.499009-974N . . . . . . . . . . . . . 8.499009-975N . . . . . . . . . . . . . 8.499009-977N . . . . . . . . . . . . . 8.499009-979N . . . . . . . . . . . . . 8.499009-980 . . . . . . . . . . . . . . . 6.69009-980N . . . . . . . . . . . . . 8.489009-981 . . . . . . . . . . . . . . . 6.79009-981N . . . . . . . . . . . . . 8.499009-982 . . . . . . . . . . . . . . . 6.79009-982N . . . . . . . . . . . . . 8.499009-983 . . . . . . . . . . . . . . . 6.79009-983N . . . . . . . . . . . . . 8.499009-984 . . . . . . . . . . . . . . . 6.79009-984N . . . . . . . . . . . . . 8.499009-985 . . . . . . . . . . . . . . . 6.79009-985N . . . . . . . . . . . . . 8.499009-987 . . . . . . . . . . . . . . . 6.79009-987N . . . . . . . . . . . . . 8.499009-989 . . . . . . . . . . . . . . . 6.79009-989N . . . . . . . . . . . . . 8.499009-990N . . . . . . . . . . . . . 8.489009-991N . . . . . . . . . . . . . 8.499009-992N . . . . . . . . . . . . . 8.499009-993N . . . . . . . . . . . . . 8.499009-994N . . . . . . . . . . . . . 8.499009-995N . . . . . . . . . . . . . 8.499009-997N . . . . . . . . . . . . . 8.499009-999N . . . . . . . . . . . . . 8.499909-202 . . . . . . . . . . . . . . . 7.59909-203 . . . . . . . . . . . . . . . 7.59909-221 . . . . . . . . . . . . . . . 7.39909-222 . . . . . . . . . . . . . . . 7.39909-224 . . . . . . . . . . . . . . . 7.49909-225 . . . . . . . . . . . . . . . 7.49909-226 . . . . . . . . . . . . . . . 7.49909-227 . . . . . . . . . . . . . . . 7.49909-232 . . . . . . . . . . . . . . . 7.19909-610 . . . . . . . . . . . . . . 7.199909-612 . . . . . . . . . . . . . . 7.199909-910SC . . . . . . . . . . . . 7.21
9909-912 . . . . . . . . . . . . . . . 7.19909-912-13 . . . . . . . . . . . . . 7.19909-920 . . . . . . . . . . . . . . . 7.99909-921 . . . . . . . . . . . 1.6, 7.89909-922 . . . . . . . . . . . 1.6, 7.89909-923 . . . . . . . . . . . 1.7, 7.99909-926 . . . . . . . . . . . . . . 7.109909-927 . . . . . . . . . . . . . . 7.109999-50 . . . . . . . . . . . . 1.9, 6.19999-162N . . . . . . . . 8.21, 8.379999-163N . . . . . . . . 8.21, 8.379999-164N . . . . . . . . 8.21, 8.379999-166N . . . . . . . . 8.21, 8.379999-181N . . . . . . . . . . . . . 8.50
1
2
3
4
5
6
7
8
9
10
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25INCHES CM
IND
EX
xvi
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
WA
RR
AN
TY
WARRANTYSCANLAN® instrumentation is guaranteed to be free from defects in materials and workmanship for ten full years. Any instrument which proves defective when used for its intended purpose will be repaired or replaced at no charge, at the sole discretion of Scanlan International, Inc. This warranty is in lieu of all other warranties, either expressed or implied. In no event shall seller be liable to buyer, or any successors of buyer, for any claim for lost opportunity, loss of goodwill, or consequential or incidental damages of any kind for any amount in excess of the price of the product. Seller agrees to replace or to issue credit at seller’s sole option any product determined to be defective in materials or workmanship. Seller shall not be responsible for the cost of labor or charges of any kind incurred due to product defect. Your rights under this warranty may vary from state to state and country to country.
SCANLAN® Instrument Sterilization Trays: SCANLAN® instrument sterilization trays are warranted for 12 months against defects in material or workmanship.
SCANLAN® DIAMOND DUST™ Instrumentation: SCANLAN® DIAMOND DUST™ jaws are guaranteed for 12 months. If needed, the DIAMOND DUST™ surface will be restored at no charge during the initial 12 month period.
Needle Holders: The use of suture needles larger than those recommended may result in damage and invalidate your warranty. Please see The Suture Size Guide for SCANLAN® Needle Holders for recommendations regarding the use of suture needles with SCANLAN® instrumentation. A copy of this publication is packaged with every SCANLAN® needle holder and is also available upon request.
Titanium Instrumentation: Different shades of blue may be found within the extensive line of anodized SCANLAN® titanium instrumentation. This is not a defect, but a phenomenon which occurs due to slight variations of manufacture technique or alloy composition. This is a cosmetic characteristic only and does not compromise the high quality of your SCANLAN® titanium instrumentation.
Scissors: Do not cut suture, gauze, or wire with scissors unless it was designed to cut those materials. All SCANLAN® Super Cut™ & Ultra Sharp® scissors must be returned to Scanlan International for complete refurbishment and sharpening in order to maintain the unique cutting edge.
SCANLAN® Premier™ Scissors: Sharpness of SCANLAN® Premier™ Scissors is guaranteed for 12 months. If needed, resharpening will be performed at no charge during the 12 month period.
Heifetz™ Clips, Yasargil-type Clips and Advantage™ Bipolar Forceps: Product in the original packaging may be returned for full credit within 60 days domestic and 90 days international of invoice date. All used product will be considered FIRM SALE. Warranted for 12 months against defects in material or workmanship.
Reliance Bulldog Clamp: Warranty for materials and workmanship will be one year. All sales are considered FIRM SALE.
PLEASE NOTE: Instrument designs may change without prior notice. We are proud of the handcrafted quality of our instruments, which can cause slight variations in instrument patterns.
IMPORTANT: All instruments must be decontaminated before returning to Scanlan International. Please identify decontaminated product by marking ″decontaminated″ on the outer shipping carton.
DEAR CUSTOMER, PLEASE NOTE: Due to the nature of our surgical instrumentation manufacturing process and our strict quality standards, various instrument patterns may occasionally be unavailable. We apologize for this inconvenience, however, each of our instruments is made by hand in a tradition of high quality craftsmanship. Therefore, scheduled delivery dates may change. We strive to be accurate as possible regarding this information, however dates may become extended and availability dates may change. Again, we apologize for this inconvenience. We will be happy to assist you in choosing an alternative instrument, as well as assist you in any way we can.
CA
RE
AN
D M
AIN
TEN
AN
CE
SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2012 Scanlan International, Inc.
CARE & MAINTENANCE OF INSTRUMENTSTo maintain optimum operating condition and to protect your warranty of SCANLAN® instrumentation, we recommend the following along with your general maintenance:
Clean. Make certain that all blood and debris are removed from the instrument as soon as possible after use. Do not allow blood to dry on the instrument.
Lubricate. After a thorough cleaning and rinsing, treat the instrument with an antimicrobial water soluble instrument lubricant.
Identify. Scanlan can provide safe and appropriate instrument identification marking system(s) upon request. Do not use a mechanical engraver to mark the instrument. If you engrave the instrument, the warranty will be invalidated.
Repair, Refurbish or Sharpen. Have this instrument repaired, refurbished, or sharpened only by a Scanlan-authorized facility. Servicing by an unauthorized facility will invalidate the warranty.
Sterilize & Store. Instruments should always be sterilized and stored in an ″open″ and unlocked position. This increases the life of the instrument, prevents possible breakage, and is recommended by established standards.
Protect. Be certain all delicate tipped instruments are covered with a device specially designed for instrument protection (such as SCANLAN® Tip Guard™ instrument protectors) during storage and sterilization.
Use. Instrument must be used for its intended purpose only. Improper use or care will invalidate warranty.
Modifications. Modifications and repair of instruments are available and must be done only through an authorized facility. Modifications by an unauthorized facility will invalidate the warranty.
IMPORTANT: All instruments must be decontaminated before returning to Scanlan International. Please identify decontaminated product by marking ″decontaminated″ on the outer shipping carton.
For further information on maintaining the quality of your surgical instrumentation, a detailed booklet entitled, The SCANLAN Guide to Care & Maintenance of Surgical Instrumentation, is available upon request.
1
2
3
4
5
6
7
8
9
10INCHES
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25CM
For more information or to place an order,
please contact your local Scanlan representative, or call...
U.S. & Canada: 800-328-9458 International: 651-298-0997FAX: 651-298-0018www.scanlaninternational.com
MK-CAT-2012 © 2012 Scanlan International, Inc.ONE SCANLAN PLAZA • SAINT PAUL, MINNESOTA 55107 • U.S.A.
800-328-9458 • 651-298-0997 • FAX 651-298-0018 • www.scanlaninternational.com