Scan-Steering · With this latest improvement the steering gear will work for a long period of...

Scan-SteeringEXECELLENT NAVIGATION

COMPLETE STEERING SYSTEMS

Scan-SteeringExcellent Navigation

2

HistoryScan-Steering was founded in 1960. Today Scan-Steer-ing is one of the leading manufactures of complete steer-ing systems, for several types of vessels in the world.We have a wide range of hydraulic end electronic equipment consisting of:

• Magneticcompass• Gyrocompass• Repeaters• Autopilots• Ruddercontrolsystems• Hydaulicsteeringgear• Powerunits• Computersystems• Accessories

Scan-Steering has always been ahead of their competi-tors when it comes to developing new technology and total steering systems, and dealing with only one sup-plierwillbenefityouinseveralways:

• Totalcompatibility• Easyinstalation• Easymaintenance• Easyservice• Quicksupport• Testedsystems

SCAN-STEERING

The steering systemToday´s modern vessels require the steering system of the future, which can help reduce the cost of main-tenance and increase fuel efficiency. Scan-Steeringhasmorethan40yearsofexperienceinmakingandinstalling special steering systems for awide variety of vessels.

The systems are made for one, two, three or more rud-ders and the multi rudder system can be electronic or mechanicalsynchronized.AllofoursystemsaremadeaccordingtoIMO,SOLASandarebuildtofit there-strictionsofanyclassificationauthority.

The steering gears are designed with one or two cyl-inderes which gives a very high degree of safty and reliability. It can be provided with a support ball bear-ing, a spherical rudder carrier bearing, or other types of bearings.

The steering is supplied with a handhydraulic wheel pump (axial piston pump), for hand and emergency steering. The wheel pump can be delivered for panel-mounting, but can also be built into a steering column.Allourhydraulicpumpscanbecreatedtofityourde-mands.Allnecessaryvalvesandfittingsaresuppliedaccordingtoclassificationrequirements.

3


Danish craftmanship...

–combined with the latest technologyScan-Steeringhascontinouslybeenworkingonimprovementinqualityandperformanceofallpartsofthesteeringsystems produced by the company.

The latest improvement has been made in the sealing components of the steering gears where the normally used U-gasketsandscraperrings,havebeenreplacedbythenewesttechnologyinteflongaskets.Thisgivesalotofbenefitssuchasgreatreductioninthenormalwearonpistonrods,reducedriskofleaks,verylonglife-timeofthegaskets,whichmeansthatnomaintenanceisrequired.Withthislatestimprovementthesteeringgearwillworkforalongperiodoftime,whithoutrequiringrepairsormajoroverhaul, as long as the required lubrication is made according to manufacturer´s instructions.Scan-steeringhasaveryflexibleproductionline,andcanmakesteeringgearsandsystemsaccordingtorequire-ments.Includinghighshockresistantanti-magneticsteeringrearmadeinsaltwaterresistantstainlesssteelandspecial construction for navy boats.

Scan-Steering is capable of delivering steering gears with capacity up to 1.000 KNm for single or twin rudder ves-sels. For twin rudder vessels there are possibilities of mechanical synchronization by means of a connecting rod or electronic syncronizaition of rudders, where connection rod is not possible to use, such as catamarans etc. in which case the company´s unique double electronic rudder control system is used.

Theelectronicruddercontrolisextremelyaccurate,thankstotheelectronicrudderangletransmitter,whichhasnowbeen proven unsurpassed for nearly 10 years. The transmitter operates without potentiometer which means that there is no mechanical wear and in many cases the rudder transmitter(s) will last for the lifetime of the vessel.AllScan-Steering´ssteeringsystemsaremadetomeettherequirementsofthevariousclassificationauthorities,this means that all steering gears etc. are made from approved materials and are constructed, assembled, and testedinaccordancewiththeruleandregulationsofallmajorclassificationauthorities.Consequentlyallsystemscanbedeliveredwithcertificateaccordingtocustomer´srequirement.

For a complete referencelist please contact us.


4

Gyrocompass Mini CourseNew gyrocompass “MINI course” is one of the mostminiature mechanical gyrocompasses in the world. It is designed to meet the requirements of modern marine in-dustry in wide range of applications due to its high accu-racy, short settling time, small size and other attractive features. The gyrocompass is based on the dynamically tuned gyroscope; this accurate sensor provides follow-up speed up to 200 °/s.

Magnetic CompassNS-140AMagneticcompass.6inches.Carddia.140mmNS-150AMagneticcompass.8inches.Carddia.150mmTelescope bearing for table or panel mounting options.

NS-160A Reflector compassReflectorcompasswith505or1050mmbinnacle.Thebinnacleismadeofseawaterresistantaluminium,fit-tedwithamagneticcompass,NS-150A. • Carddiameter150mm• Reflectortypewithmirrorand adjustablemirrorhead• Mainandemergencysupply110/220VDC

Compasses madeaccordingtoISO,IMOandSOLAS

5


HE-6000HE-6000hasbeenupgradedtoallnewdemandsandcanbeusedforalltypesofvessels.TheHE-6000autopilotcombines the analog and digital technology, witch gives a very high accuracy and extremely fast rudder control. Thisautopilotisoneofthemostfuelsavingsystemsintheworld.HE-6000offersawiderangeofinterfacessonoextra interface is needed.

Autopilots


6

DE-180DigitalrepeateroperatesonNMEA0183(RS422orRS232)

DE-200Digtalrepeater/turningindicatorcanoperateonNMEA0183(RS422orRS232),stepbystepandsyncro360:1input.

BRA-250Steeringrepeaterwithtiltingbracket.Op-eratesonNMEA0183(RS422orRS232),step by step.

BRB-250Bearingrepeaterforbulkheadmount-ing.FacilitiesforAzimuthOperatesonNMEA0183(RS422orRS232),stepbystep.

BRC-250Bearing repeater on column.FacilitiesforAzimuthOperatesonNMEA0183(RS422orRS232),stepbystep.

Universal repeaters AllrepeatersmeettherequirementsofIMO&SOLAS

7


RVPPanoramarudderindicator,with dimmer.

RXLGround-breakingrangeofpanel-mounted illuminated rudder indi-cators.

FFU-2000Full Follow Up with wheel.Adjustablezeroandgain.

FBHElectronicrudderangletransmit-ter with single or double signal.There is no mechanical parts whichmeansaveryhighschockresistance.

STM/STUSTM:ManuelpilotoperationSTU:Joystickcontrol

STS JoystickWith push botton to activate steering position.

V-500mWatch alarm with switch for 10 or 15 minutes delayed alarm.

NFUHandoperatednon-follow-upwithrudder indicator and 6 m wire.

GFCAzimuthcircleforbearingrepeater.

Accessory equipmentAllrepeatersmeettherequirementsofIMO&SOLAS To be used as part of our complete steering system


8

MR-200 LARemotecontrolforMS-2motorstarter.Formountingonbridge.Alarmsfor:

• Start/stop• Test• Powerfailure• Lowoil• Overload• Alarmlock

RC/MSDoubleremotecontrolforRC(ruddercontrol)andMS-2(motorstarter)Joystickfornon-follow-upandrudderindicator.Facilities for connection of additional rudder indicator and Full-follow-up.Alarmsfor:

• Start/stop• Test• Powerfailure• Lowoil• Overload

MS-2Double motorstarter for one or two electro-hydraulicpumpunits.Completewithamp.meterandemergencystop Alarmsfor:• Start/stop• Test• Powerfailure• Lowoil• Overload

RCDouble rudder control with two electrical separetedsystems for electrical steering and control of up to 4 setsofhydraulicvalves.Eachsystemconsistof:

• Rudderindicator• Switchforbridge/steeringroomcontrol• Non-follow-upcontroloftherudder

Rudder control & starters

9


PV-20/30Seperate control valve unit. Completewithmountingplate,setof24VDCsolenoid,controlvalve,filterunitandnon-returnvalve.Maximumworkarea:25L/minor50L/min.

P-10Hydraulic oil pump, complete withmountingplate,build inflowcontrolandsafty valve.Adjustableoil flow.DrivernbyV-beltfrommainengine.Thesaftyvalveandflowcontrolen-sure a constant speed of the rudder, regardless the speed of the main en-gine.Standartversionforclockwiserotation.Whencounter-clockwiseisneededorderP-5

PSU-50The new low noise, soft control, electro-hydraulic power steeringunit.Completewith:

• Electricalmotor• Oilpump• Non-returnvalve• Filterunit• Counterbalance• Vacuummeterforfiltercontrol• Pressurecontrolmanometer

PSPCompletepowerpackwith:• TwoPSU-50powerunits• Emergencypump• Wheel• Starter• Ruddercontrol• Doubletanks.Madeforeasy installation.

MT-500-60000Handandelectro-hydraulicsteeringgearsrangingfrom0.5-100T.M.Thesteering gear is suitable for one, two or more rudders, either with connection bar or electrical synchronizing. The steering gear is supplied with:

• Wheelpump• Non-returnvalve• Flexiblehoses• Baseplatewithsupportbearing• Tillerwithkeywayandbolts• Allnecessaryvalvesandfittings.

Hydraulic gear Allourpartsareapprovedbyeverymajorclassificationsocieties


10

Examples of complete steering systems

All systems are made according to classification authorities

Steering gear driven by main engine

Steering gear with two electrical pumps

11


Examples of complete steering systems

All systems are made according to classification authorities

Steering gear with mechanical connection bar

Electronical synchronized steering gear

Scan-SteeringFabriksvej 14 - 6960 Hvide Sande - DenmarkPhone: +45 9731 1045 - Fax: +45 9731 1677

[email protected] - www.as-scan.com

TOGETHERwe’ll compile the steering system

YOUneed

Scan-Steering · With this latest improvement the steering gear will work for a long period of...

Documents

Transcript of Scan-Steering · With this latest improvement the steering gear will work for a long period of...