SBT - Small Bore Tubing - Businessmagnet Ltd...2003/02/01 · ECITB in collaboration with Step...
Transcript of SBT - Small Bore Tubing - Businessmagnet Ltd...2003/02/01 · ECITB in collaboration with Step...
Certification
Technical Test Length
ECITB Approved Technical Test Centres
TSBT01
PART NUMBER:
Who can take a Technical Test?
Small Bore Tubing Technical Tests
Please note that TSBT01 must be taken prior to TSBT02 if attempting both tests
TSBT02
TSBT03
TSG-ECITBTEST01TSG-ECITBTEST02TSG-ECITBTEST03
Contact
Technical Testing with the associated ECITB certificate of achievement plays a key role in validating a candidates skill, ability and job knowledge in a specific task or activity. Each Technical Test contains 10 questions and a practical activity on the specified test. These tests are grant aided for ECITB registered employers.
All candidates will be issued with a pre-test checklist to ensure they are properly prepared for the testing session
Technical Assessment – Assemble and Install Small Bore Tubing Assemblies (Twin Ferrule)The candidate has to successfully use the appropriate tools, equipment and materials to plan, prepare, fabricate, assemble and install a small bore tubing assembly as per the specified drawing and within set tolerances.
ECITB Certificate of Achievement - Reassessment every 3 years
SBT - Small Bore Tubing
One to Two Hours - maximum 4 candidates per test
New Workers who have an ECITB SBT01 Approved Course Certificate AND a Completed Work Based Task Assignment Personal Record signed off by the supervisor.Existing Workers who have a Company Letter of Endorsement AND a Small Bore Tubing or instrument pipework trainingcertificate(s) (where applicable).Self-Sponsoring Individuals whose Curriculum Vitae (C.V.) details previous small bore tubing experience ANDhave a Small Bore Tubing or instrument pipework training certificate(s) (where applicable).
Swagelok - TM Swagelok Company
SWAGELOK SCOTLANDAUTHORISED SALES AND SERVICE CENTRE
T. +44 (0) 1224 759900E. [email protected]. WWW.SWAGELOK.COM/SCOTLAND
SWAGELOK TEESSIDEAUTHORISED SALES AND SERVICE CENTRE
SWAGELOK IRELANDAUTHORISED SALES AND SERVICE CENTRE
T. +353 (1) 2864088E. [email protected]. WWW.SWAGELOK.COM/IRELAND
HEAD OFFICE: SILVERTREES DRIVE, SILVERTREES BUSINESS PARK, WESTHILL, ABERDEEN, AB32 6BHSwagelok Scotland, Swagelok Teesside, Swagelok Ireland and Ireland Valve & Fitting Co are trading names of Fluid System Technologies (Scotland) Ltd.
T. +44 (0) 1642 636320E. [email protected]. WWW.SWAGELOK.COM/TEESSIDE
Stage 3 Technical CompetenceTSBT01, TSBT02 & TSBT03
Technical Assessment – Disassemble and Reinstall Small Bore Tubing Assemblies (Twin Ferrule)The candidate has to successfully dismantle, identify faults and defects on small bore tubing assemblies. Then reinstall small bore tubing assemblies using the appropriate tools, equipment and materials as per the specified drawing and specification sheet within set tolerances.
Technical Assessment – Assemble and Install Small Bore Tubing Assemblies (Cone & Thread)The candidate has to successfully use the appropriate tools, equipment and materials to plan, prepare, fabricate, assemble and install a small bore tubing assembly as per the specified drawing and within set tolerances.
Examiner Times of TestsECITB Certified Examiners. Mon - Fri: 08.30: Technical Test TSBT01
11.00: Technical Test TSBT02 14.00: Technical Test TSBT01, TSBT02 or TSBT03
Swagelok Scotland Silvertrees Drive, Silvertrees Business Park, Westhill, Aberdeen, AB32 6BHSwagelok TeessideSTEM Centre, Middlesbrough College, Windward Way, Middlesbrough, TS2 1QG Swagelok Ireland Unit 20, Southern Cross Business Park, Boghall Road, Bray, Co. Wicklow, A98 F590
For further details, please contact our Training Division at [email protected] or call +44 (0) 1224 759916
STAGE 4TEST CENTRE
STAGE 3TEST CENTRE
STAGE 2WORKPLACE
Securing engineering construction skills, now and for the future www.ecitb.org.uk
ECITB in collaboration with Step Change in Safety introduced the SBT model in 2012 of training and validating skills in the small bore tubing assemblies. The 4 SBT approved training courses are derived from the ECITB Small Bore Tubing technical training standards with work based task assignments and 4 ECITB Technical Competence Validation Tests.
These technical training standards and technical competence validation tests cover - isolations, dismantling techniques, inspection of components, shape components, replace components, install and pressure testing of small bore tubing assemblies.
THE 4 STAGE ECITB/STEP CHANGE IN SAFETY SBT MODEL
SMALL BORE TUBING (SBT)
ECITB’s approved training providers can offer 3 SBT training courses ranging from 1 day to 2days:SBT01 - Assemble and Install Small Bore Tubing with Twin Ferrule
Mechanical Grip Fittings SBT02 - Assemble and Install Small Bore Tubing with Cone & Threaded
Medium and High Pressur e ModuleSBT03 - Assemble and Install Small Bore Tubing with Cone & Threaded
Medium and High PressureSBT 04 - Hydrotest SBT AssembliesLearners are not considered technically competent at Stage 1.These courses are grant aided for ECITB registered employers
STAGE 1ONSHORETRAININGCENTRE
The learner uses the Work Based Task Assignment to consolidate knowledge and skills in the workplace under supervision.
The relevant Work based Task assignment must be completed within 12 months of the initial training course to be eligible to take the technical test.
Technical Testing with an associated ECITB certificate of achievement plays a key role in validating an Individual’s skill, ability and job knowledge in a specific task area. Each test consists of a knowledge test and practical activity test against identified test criteria.
These tests are grant aided for ECITB registered employers
Computer Based Training (CBT) - Existing workers may require refresher training on the knowledge aspects before undertaking the ECITB Technical Tests. Atlas now offers a SBT CBT module.
WorkplacePractice
Disassemble and reinstall SBT
Assemblies
WorkplacePractice
Assemble and Install Small Bore Tubing Assemblies –
Twin Ferrule
TechnicalCompetence
TSBT01 Assemble and Install Small Bore Tubing
Assemblies – Twin Ferrule
Reassessmentevery 3 years
Reassessmentevery 3 years
Personnel undertaking operations on small bore tubing assemblies.Using twin ferrule mechanical grip and cone & threaded techniques. Carrying out Hydrostatic testing of SBT assemblies
FURTHER INFORMATION
The list of ECITB approved training providers and ECITB approved test centres can be found on the ECITB website or contact your local ECITB Account Manager for funding information.Contact details are available on the ECITB website, please visit: www.ecitb.org.uk
TechnicalCompetence
TSBT02 Disassemble and reinstall SBT Assemblies
SBT01Assemble and Install Small Bore Tubing
with Twin Ferrule Mechanical Grip Course
Reassessmentevery 3 years
TechnicalCompetence
TSBT 04 - Hydrotest SBT Assemblies
TechnicalCompetence
TSBT03 Assemble and Install Small Bore Tubing Assemblies –
Cone & Threaded
WorkplacePractice
Assemble and Install Small Bore Tubing Assemblies –
Cone & Threaded
SBT 04 - Hydrotest SBT Assemblies
Reassessmentevery 3 years
WorkplacePractice
Hydrotest SBT Assemblies
SBT02 & 3Assemble and Install Small Bore
Tubing with Cone & Threaded Medium and High Pressure
Module or Course