SBS-688LS - Sinotec
Transcript of SBS-688LS - Sinotec
. 2 1CH SOUNDBAR SYSTEM
SBS-688LS
12
12
2.Important Safety Instructions............................................... 4
9.
to direct heat, rain
used to disconnect the device, the disconnected device should remain readily operable.
for the replacement of the
receptacles or at the point
way, for example, when the power-supply cord
Use the unit only
from it toppling over.splashing, no objects
should beused to disconnect the device, the disconnected device
should remain readily operable. In order
is replaced incorrectly
SBS-688LS
3.5mmAUX cablex1
AC 110V-240V 50Hz/60Hz
For South Africa, it only works under 230V 50Hz.
Power Consumption
66H*75D*860L mm(Soundbar)
Name 2.1CH Soundbar System
96W
115W*420H*250Dmm (Subwoofer)
4.5
STOP
PLAY/PAUSE
NEXT
PREV
place the unit.
USB AUX SW OUT
USB AUX SW OUT
SW output
5
STOP
PLAY/PAUSE
NEXT
PREV
(Only work under USB mode)
6. Stand by: Press and hold in 3-5 seconds
Input: Press in short
9. Bluetooth Pair/Play/Pause Bluetooth pair: Under BT mode, extended
Play/pause: only work under BT/USB mode
till BT press in 3-5 seconds disconnected
Green
SBS-688LS
cyan
battery slot SBS-688LS
battery
4
Plug the power cord in and the LED will light up.select the mode
Plug the power cable in and wait for the LED to light up in red.
BT BT
BTBT
BT BT
BT
Press the INPUT button to select the AUX mode, hold it until the LED lights up green.
Insert the USB drive.
Press and hold the
Unit not responding
Volumeissues
Pairing issues
Remoteproblematic
try to select differentTurn the appliance off
then turn it on again.
manual on how to adjust the volume.
manual on how to pair devices.
may be depleted. Try
with a slightly dam
have questions