SBE Schrader Bergbau Elektrik GmbH · Elektrik GmbH The TSM scanner is a research project by...
2
> Monitoring of boundary layers through laser technology > Heading optimisation > Process visualisa- tion in local networks > designed for use in hazardous and explosive areas Explosion-proof road header scanner type dLS 2000-SC-TSM The road header scanner (TSM scanner) was developed especially for monitoring and assessing coal boundary layers for underground heading machines. The TSM scanner monitors the host rock during heading with laser technology and converts the data into optimised cutting parameters. Schrader Bergbau Elektrik Höfer Ohl 12 51645 Gummersbach Deutschland / Germany Tel. +49 - 2261-92053-0 Fax +49 - 2261-92053-29 E-Mail [email protected] http://www.sbe-schrader.com SBE Schrader Bergbau Elektrik GmbH The TSM scanner is a research project by Ruhrkohle AG (RAG); this project was carried out in conjunction with the Fraunhofer IML Institut, Sandvik Mining & Construction and SBE Schrader. The measuring system consists of two TSM scanners which are each installed to the left and the right of the cutting arm of a road header. Both scanners are connected to the control system of a road header or to the IPC via CAN-Bus. Before the cutting process begins, the working face of the section is scanned on both sides and an exact image of the current situation of the coal seam in the working face is visualised. The data collected is converted into optimised cutting parameters. The objective of this is to minimise costs, to enable a constant tunnelling speed and to document in greater detail the tunnel- ling process for mine surveyors. Since 2009, this measuring system has been used successfully on the RAG version of the Sandvik Miner MR620 at the Prosper-Haniel mine. We will be happy to advise you in the field of explosion-proof laser techno- logy in accordance with Ex 1 of the ATEX directives for underground areas.
Transcript of SBE Schrader Bergbau Elektrik GmbH · Elektrik GmbH The TSM scanner is a research project by...
> Monitoringof boundarylayers throughlaser technology
> Headingoptimisation
> Processvisualisa- tioninlocalnetworks
> designedforusein hazardousand explosiveareas
Explosion-proofroadheaderscannertypedLS2000-SC-TSM
The road header scanner (TSM scanner) was developed especially formonitoring and assessing coal boundary layers for underground headingmachines. The TSM scanner monitors the host rock during heading withlaser technology and converts the data into optimised cutting parameters.
Schrader Bergbau ElektrikHöfer Ohl 1251645 GummersbachDeutschland / Germany
Tel. +49 - 2261-92053-0Fax +49 - 2261-92053-29
E-Mail [email protected]://www.sbe-schrader.com
SBE SchraderBergbauElektrik GmbH
The TSM scanner is a research projectby Ruhrkohle AG (RAG); this project was carried out in conjunction with the Fraunhofer IML Institut, Sandvik Mining & Construction and SBE Schrader.
The measuring system consists of twoTSM scanners which are each installedto the left and the right of the cutting armof a road header. Both scanners are connected to the control system of a road header or to the IPC via CAN-Bus.
Before the cutting process begins, theworking face of the section is scannedon both sides and an exact image of thecurrent situation of the coal seam in theworking face is visualised.
The data collected is converted into optimised cutting parameters. The objective of this is to minimise costs, to enable a constant tunnelling speed and to document in greater detail the tunnel-ling process for mine surveyors.
Since 2009, this measuring system hasbeen used successfully on the RAG version of the Sandvik Miner MR620 at the Prosper-Haniel mine.
We will be happy to advise you in the field of explosion-proof laser techno-logy in accordance with Ex 1 of the ATEX directives for underground areas.
TechnicalData
Voltage: 230 V AC Standard (500/1000V special model) Current: 4 A AC total/device (at 24VDC)Current: 2 A AC total/device (at 230 VAC)Frequency: 50 HzAmbient temperature: 0 to +32°CShort-time withstand current: N/A(Short circuit - current limiter through series resistor in the AB room : Ik =<35A)Switch disconnector: not availableShort circuit current: I“k2 5kA (in the AC terminal box Ex-e) with protection through upstream fuses 25 A gBOperating performance: max. 60 VA/Watt (24V-2.5ADC)Max. permitted main fuse: 4 A mt at 24 VDC 1 A mt at 230 VACMax. permitted equipment fuse: 6,3 A DIN 41570 1kV round fuse 8x50 mm
CharacteristicsdLS2000SC-TSMThis product is in compliance with the directives 94/9/EG (ATEX-directive) anddirective EMV2004/108/eg (emv-directive)
Harmonised standards applied:EN 60079-0 :2006 (general regulation)EN 60079-1 :2007 (pressure-resistant casing)EN 60079-7 :2007 (increased safety)EN 60079-11:2007 (intrinsic safety)Harmonised standards applied for EMC-Guideline 2004/108/EC, specially:EN 61000-6-3 :2007EN 61000-6-2 :2005EN 61000-3-2 :2006
Standards
I M2 Ex de [ib] I (devices type dLS 2000-SC) I M2 SYST EEx ib I (intrinsically safe systems) Ex op is I Mb (scanner)
EC-type examination certificate: BVS 07 ATEX E 084 X
Approvals
SBE Schrader Bergbau Elektrik, Höfer Ohl 12, 51645 Gummersbach, Tel. 02261 - 92053-0, Fax 02261 - 92053-29, http://www.sbe-schrader.com
Netherlands, Belgium, LuxemburgTechnischHandelsburoSarkB.V.Waterpoort 2aNL-6221 GB Maastricht Tel. +31 - 43-3213443Fax +31 - 43-3213680
UkrainaOOO“ZAVODREMMASH“ul. Uralskaya 1284333 Ukraina, Donetskaya, KramatorskTel. +38 - 0503678426
South AfricaRepresentativeformining-industrieSalzgitter South-Africa PTYPO. Box 779, Florida 1710Tel. +27 - 11 - 472 - 3545
Representativeoffices:
Explosion proof electrical equipment formining and industry
SBE SchraderBergbauElektrik GmbH
TSM scanner type dLS 2000-SC-TSM
DimensionsLength: 605 mmWidth: 323 mmDepth: 265 mmWeight: ca. 65 kg
