SB2014 rev 3 - pipehangers.com accordance with MSS SP‐58, MSS SP‐ 69, MSS SP‐127, ASME B31.1,...
Transcript of SB2014 rev 3 - pipehangers.com accordance with MSS SP‐58, MSS SP‐ 69, MSS SP‐127, ASME B31.1,...
Catalog SB2014
SEISMICBRACING
Introduction
Since1913Carpenter&PatersonInc.hasspecializedinthedesign,manufacture,anddistributionofacompletelineofpipesupports,piperestraints,vibrationisolationdevices,seismiccontrolsystemsandmanyrelatedproductsspecificallydesignedinaccordancewithMSSSP‐58,MSSSP‐69,MSSSP‐127,ASMEB31.1,ASMEB31.3,ASMEB31.7,ASMESectionIX,WW‐H‐171E,A‐A‐1192AandFEMA414.
Asanindustryleaderwithaninternationalreputation,ourproductshavebeenspecifiedandinstalledonmajorpowergeneratingstations,petrochemicalplants,watertreatmentplants,pharmaceuticalandindustrialprojectslocatedwithintheUnitedStatesandthroughouttheworld.
Oursalesandengineeringgroupsofferadiversifiedrangeofexperienceintheareasofproductdesign,engineering,specalizedapplicationsandareavailabletodiscussyourindividualrequirementsandthebasisoffunction,reliabilityandmanufacturingeconomy.
Pipe Bracing
Pages 2 ‐ 3
Attachments
Pages 4 ‐ 9
Hangers
Pages 10 ‐ 11
Channel & Brackets
Pages 12 ‐ 13
Cable Attachments
Pages 14 ‐ 16
Fasteners
Pages 17 ‐ 23
SEISMIC BRACINGwww.carpenterandpaterson.com [email protected]
Pipe Bracing
Standard Sway Brace Attachment
Figure SB1 Sch. 40
Pipe Sizes Pipe Sizes01.25X01 01X01
01.25X01.25 01X01.25
01.25X01.50 01X01.50Function: Designed for bracing pipe against sway and 01.25X02 01X02
seismic disturbances in accordance with NFPA 13. 01.25X03 01X03Approvals: Underwriters Laboraties listed for the US & Canada 01.25X04 01X04
Materials: Electro‐galvanized Carbon Steel 01.25X06
Rigid Sway Brace Attachment
Figure SB2Pipe Sizes Pipe Sizes01.25X02.50 01X02.50
01.25X03 01X03
01.25X04 01X04Function: Designed for bracing pipe against sway and 01.25X06 01X06
seismic disturbances in accordance with NFPA 13. 01.25X08 01X08Approvals: Underwriters Laboraties listed for the US & CanadaMaterials: Electro‐galvanized Carbon Steel
Heavy Sway Brace Attachment
Figure SB3
Pipe Sizes Pipe Sizes02X02.50 01.50X02.50
02X03 01.50X03Function: Designed for bracing pipe against sway and 02X04 01.50X04
seismic disturbances in accordance with NFPA 13. 02X06 01.50X06Approvals: Underwriters Laboraties listed for the US & Canada 02X08 01.50X08
Materials: Electro‐galvanized Carbon Steel
SEISMIC BRACING
Page 2
Pipe Bracing
Supporting Pipe Attachment
Figure SB4Pipe Sizes Pipe Sizes0.75 03
01 03.50
01.25 04Function: Designed for suspension and bracing pipe against sway 01.50 05
and seismic disturbances in accordance with NFPA 13. 02 06Approvals: Underwriters Laboraties listed for the US & Canada 02.50 08
Materials: Electro‐galvanized Carbon Steel
Clamping Pipe Attachmant
Figure SB5Pipe Sizes Pipe Sizes0.75 03
01 03.50
01.25 04
Function: Universal swivel design for bracing pipe against sway 01.50 05
and seismic disturbances in accordance with NFPA 13. 02 06
Approvals: Underwriters Laboraties listed for the US & Canada 02.50 08
Materials: Electro‐galvanized Carbon Steel
Supporting Pipe Attachment
Figure SB6Pipe Sizes Pipe Sizes01.25X02.50 01X02.50
01.25X03 01X03
01.25X04 01X04
Function: Universal swivel design for bracing pipe against sway 01.25X05 01X05
and seismic disturbances in accordance with NFPA 13. 01.25X06 01X06
Approvals: Underwriters Laboraties listed for the US & Canada 01.25X08 01X08
Materials: Electro‐galvanized Carbon Steel
SEISMIC BRACING
Page 3
Attachments
SwIvel Brace Fitting
Figure SBF1Pipe Sizes01
01.25
Function: Designed for attaching to structure or braced pipe used
with seismic bracing in accordance with NFPA 13. Approvals: Underwriters Laboraties listed for the US & CanadaMaterials: Electro‐galvanized Carbon Steel
Straight Brace Fitting
Figure SBF2Pipe Sizes01
Function: Designed for attaching to structure or braced pipe used
with seismic bracing in accordance with NFPA 13.Approvals: Underwriters Laboraties listed for the US & CanadaMaterials: Electro‐galvanized Carbon Steel
No‐Thread Straight Fitting
Figure SBF3
Pipe Sizes
01
01.25
Function: Designed for attaching to structure or braced pipe used
with seismic bracing in accordance with NFPA 13.Approvals: Underwriters Laboraties listed for the US & CanadaMaterials: Electro‐galvanized Carbon Steel
SEISMIC BRACING
Page 4
Attachments
Universal Swivel Brace Attachment
Figure SBF4Sizes
1/2" mounting Hole
Braces up to 8" pipe
Brace Member1" to 2" Pipe
Function: Designed for attaching to structure or braced pipe used
with seismic bracing in accordance with NFPA 13.
Approvals: Underwriters Laboraties listed for the US & CanadaMaterials: Electro‐galvanized Carbon Steel
No‐Thread Swivel Attachment
Figure SBF5Sizes01
01.25
Function: Designed for attaching to structure or braced pipe used
with seismic bracing in accordance with NFPA 13.
Approvals: Underwriters Laboraties listed for the US & CanadaMaterials: Electro‐galvanized Carbon Steel
4‐Way Longitudinal Sway Brace Attachment
Figure SBF6 Sizes01X01
01X01.25
01.25X01.25
Function: Designed for attaching to structure or braced pipe used
with seismic bracing in accordance with NFPA 13.
Approvals: Underwriters Laboraties listed for the US & CanadaMaterials: Electro‐galvanized Carbon Steel
SEISMIC BRACING
Page 5
Attachments
Sway Brace Bar Joist Adapter
Figure SBF7Sizes3/8" Beam Max
Up to 8" Pipe
Function: Sway brace adapter designed to provide greater load capacities by providing
multiple fastener attachments in accordance with NFPA 13.
Approvals: Underwriters Laboraties listed for the US & CanadaMaterials: Electro‐galvanized Ductile Iron
Sway Brace Multi‐Fastener Adapter
Figure SBF8Hole Sizes0.50 (1/2") to
0.75 (3/4")
Braces up to 8" PS
Function: Sway brace adapter designed to provide greater load capacities by
providing multiple fastener attachments in accordance with NFPA 13.
Approvals: Underwriters Laboraties listed for the US & CanadaMaterials: Electro‐galvanized Low Carbon Steel 2x2x1/4
Rod Swivel Attachment
Figure SBF9Rod Sizes0.38 (3/8")
Function: Swivel, end restraint for structural attachment, during
seismic disturbances in accordance with NFPA 13.
Approvals: Underwriters Laboraties listed for the US & CanadaMaterials: Electro‐galvanized Carbon Steel
SEISMIC BRACING
Page 6
Attachments
Sway Brace Bar Joist Adapter
Figure SBF10Beam Size
Thickness3/8" Min
1‐1/4" Max
Function: Designed for bracing pipe against sway and Braces
seismic disturbances in accordance with NFPA 13. up to 8" pipe
Approvals: Underwriters Laboraties listed for the US & Canada
Materials: Electro‐galvanized Ductile Iron
Steel Eye Socket
Figure SES
Rod Sizes3/8"
Function: Designed to prevent upward movement of pipe during
seismic disturbances in accordance with NFPA 13.
Approvals: Underwriters Laboraties listed for the US & CanadaMaterials: Electro‐galvanized Carbon Steel
Surge Restrainer
Figure SR1Rod Sizes3/8"
Used with Figue 800FP sizes 3/8 to 2"
Function: Designed to prevent upward movement of pipe duringseismic disturbances in accordance with NFPA 13.
Approvals: Underwriters Laboraties listed for the US & CanadaMaterials: Powder Coated Carbon Steel
SEISMIC BRACING
Page 7
Attachments
Seismic Rod Stiffiner
Figure SRSRod Sizes3/8‐5/8"
Function: Designed to secure Multi‐Strut© channel to
threaded rod hanger for vertical seismic bracing.
Approvals: Underwriters Laboraties listed for the US & CanadaMaterials: Electro‐galvanized Carbon Steel
C‐Clamp
Figure 47Rod Sizes0.38 (3/8")
0.50 (1/2")
Function: Designed to attach to the botom flange of a steel beam.
A locking nut prevents loosening due to vibration.
Approvals: Underwriters Laboraties listed for the US & CanadaMaterials: Plain or Electro‐galvanized Carbon Steel
C‐Clamp Retaining Clip
FIGURE 22Length
4‐1/2"
6"
8"
Function: Designed for use with Figure 47 to prevent movement 10"
of the C‐Clamp due to vibration after installation. 12"
Approvals: Underwriters Laboraties listed for the US & Canada 14"
Materials: Plain or Electro‐galvanized Carbon Steel
SEISMIC BRACING
Page 8
AttachmentsTop Beam Clamp with Lock Nut
Figure 192 & 192WRod Sizes0.38 (3/8")
0.50 (1/2")
0.63 (5/8")**
Function: Designed to attach to the top or botom flange of a steel 0.75 (3/4")**
beam. A locking nut prevents loosening due to vibration. 0.88 (7/8")**
Approvals: Underwriters Laboraties listed for the US & CanadaMaterials: Plain or Electro‐galvanized Carbon Steel
Top Beam Clamp Retaing Clip
Figure 192RSLength4‐1/2"
6"
8"
Function: Designed for use with Figure 192 or 192W to prevent movement 10"
of the beam clamp due to vibration after installation. 12"
Approvals: Underwriters Laboraties listed for the US & Canada 14"
Materials: Plain or Electro‐galvanized Carbon Steel
Retrofit Retaining Clip
Figure 192RSRLength
4‐1/2"
6"
8"
Function: Designed for use with Figure 192 or 192W to prevent movement 10"
of the beam clamp due to vibration after installation. 12"
Approvals: Underwriters Laboraties listed for the US & Canada 14"
Materials: Plain or Electro‐galvanized Carbon Steel
SEISMIC BRACING
** Jr. Only (Fig.
192 also called
Junior Top
Beam clamp)
Page 9
HangersAdjustable Swivel Ring
Figure 800 & 800FP Pipe Sizes Pipe Sizes3/4"** 3"
1"** 3‐1/2"
1‐1/4"** 4"
Function: Designed for the support of non‐insulated pipe lines. 1‐1/2"** 5"
Swivel nut provides gripping for adjusting elevation. 2"** 6"
Approvals: Underwriters Laboraties listed for the US & Canada 2‐1/2" 8"
Materials: Electro‐galvanized Carbon Steel ** 800FP only
Clevis Hanger
Figure 100D & 100D EPipe Sizes2‐1/2"
3"
3‐1/2"
Function: Designed to support stationary lines from above, allowing 4"
for 1" to 1‐1/2" of vertical adjustment. 5"
Approvals: Underwriters Laboraties listed for the US & Canada 6"
Materials: Plain or Electro‐galvanized Carbon Steel 8"
Extension Riser Clamp
Figure 126D & 126D E Pipe Sizes Pipe Sizes
3/4" 3"
1" 3‐1/2"
1‐1/4" 4"
Function: Desinged for the support or steadying of vertical 1‐1/2" 5"
pipe risers. 2" 6"
Approvals: Underwriters Laboraties listed for the US & Canada 2‐1/2" 8"
Materials: Plain or Electro‐galvanized Carbon Steel
SEISMIC BRACING
Page 10
HangersCeiling Flange
Figure 85RTRod Sizes3/8"
1/2"
Function: Designed for attaching a rod to a wooden member.
Approvals: Underwriters Laboraties listed for the US & CanadaMaterials: Plain or Electro‐galvanized Malleable Iron
Stamped Ceiling Flange
Figure 85RTSTPRod Sizes3/8"
Function: Desinged for attaching a rod to a wooden member.
Approvals: Underwriters Laboraties listed for the US & CanadaMaterials: Plain or Electro‐galvanized Carbon Steel
Stamped Side Beam
Figure 153SRod Sizes
3/8"
Function: Desinged for attaching a rod to a wooden member.
Approvals: Underwriters Laboraties listed for the US & Canada
Materials: Plain or Electro‐galvanized Carbon Steel
SEISMIC BRACING
Page 11
Multi‐Strut®Channel
Strut Channel
Figure M112‐M164Strut SizesM112 3‐1/4"
M122 2‐7/8"
M132 1‐5/8"
M164 13/16"
Function: Designed for uses as a trapeze and or rigid bracing
of pipe against sway and seismic disturbances.
Approvals: MSS SP‐127
Materials: Electro‐galvanized Carbon Steel
Rigid Brackets
2‐Hole Seismic Clip
Figure 2HSC2Sizes9/16" hole
Function: Designed for attaching Multi‐Strut© channel to structure
and or seismic brace in accordance with NFPA 13.
Approvals: MSS SP‐127
Materials: Electro‐galvanized Carbon Steel
3‐Hole Seismic Bracket
Figure 3HSBSizes0 (9/16 Hole)
1 (11/16Hole)
Function: Designed for attaching Multi‐Strut© channel to structure 2 (15/16Hole)
and or seismic brace in accordance with NFPA 13. 3 (1‐5/16Hole)
Approvals: MSS SP‐127
Materials: Electro‐galvanized Carbon Steel
SEISMIC BRACING
Page 12
Hinged Brackets
Seismic Bracket 2‐Hole Hinge
Figure SH200Sizes9/16 Hole
Function: Designed for attaching Multi‐Strut© channel to structure
and or seismic brace in accordance with NFPA 13.
Approvals: MSS SP‐127
Materials: Electro‐galvanized Carbon Steel
Seismic Bracket 3‐Hole Hinge
Figure SH300Sizes9/16 Hole
11/16 Hole
13/16 Hole
Function: Designed for attaching Multi‐Strut© channel to structure
and or seismic brace in accordance with NFPA 13.
Approvals: MSS SP‐127
Materials: Electro‐galvanized Carbon Steel
Seismic Bracket 4‐Hole Hinge
Figure SH400Sizes9/16 Hole
Function: Designed for attaching Multi‐Strut© channel to structure
and or seismic brace in accordance with NFPA 13.
Approvals: MSS SP‐127
Materials: Electro‐galvanized Carbon Steel
SEISMIC BRACING
Page 13
Cable Attachments
Seismic Cable Brace
Figure SCBSizes0 (9/16" Hole)
1 (11/16" Hole)
2 (13/16"Hole)
Function: Designed for attaching wire rope cable to structure 3 (1‐5/16"Hole)
and or seismic brace in accordance with NFPA 13.
Approvals: MSS SP‐127
Materials: Electro‐galvanized Carbon Steel
Seismic Cable Brace With Hook
Figure SCBHSizes0 (3/8" Hook)
1 (5/8" Hook)
2 (7/8" Hook)
Function: Designed for attaching wire rope cable to structure 3 (1‐1/8" Hook)
and or seismic brace in accordance with NFPA 13.
Approvals: MSS SP‐127
Materials: Electro‐galvanized Carbon Steel
Galvanized Cable
Figure GACSizes1/8 X 250' Roll
3/16 X 250' Roll
1/4 X 250' Roll
Function: Used for attaching seismic attachment to structure 3/8 X 250' Roll
and or seismic brace in accordance with NFPA 13.
Approvals: MSS SP‐127
Materials: Electro‐galvanized Carbon Steel
SEISMIC BRACING
Page 14
Cable Attachments
Seismic Cable Clamps
Figure SCCSizes1/8
3/16
1/4
Function: Used for securing seismic wire rope cable 3/8
in accordance with NFPA 13.
Approvals: MSS SP‐127
Materials: Electro‐galvanized Carbon Steel
Wire Rope Thimble
Figure WRTSizes1/8
3/16
1/4
Function: Used for securing seismic wire rope cable 3/8
in accordance with NFPA 13.
Approvals: MSS SP‐127
Materials: Electro‐galvanized Carbon Steel
Wire Rope Cutter
Figure HFWRC
Function: Used for cutting seismic wire rope cable.
Approvals: NoneMaterials: Carbon Steel
SEISMIC BRACING
Page 15
Cable Attachments
Gripple® Seismic Bracing System*
Figure GSLockable with cable sizes12 (1/8")10, 15 & 20' Loops
19 (3/16 10, 15 & 20' Loops
25 (1/4")10, 15 & 20' Loops
End fitting and bracket sizes4 (3/8")
5 (1(2")
6 (5/8")
8 (3/4")
10 (1")
* Sold as kits, which consist of one Lockable, one cable with end fitting and one loose bracket.
End Fitting available with 45° eyelet, standard single bracket or standard double bracket.
Loose bracket available in standard, double standard, retrofit or double retrofit.
Function: Gripple Seismic Restraint Systems are specifically designed and engineered to brace
and secure nonstructural equipment and components within a building or structure
to minimize earthquake damage to suspended components
Approvals: UL NEBS GR 63 Core CertificationMaterials: Electro galvanized carbon steel
Gripple® Seismic Installation Manual should be
consulted when designing or installing seismic
bracing systems using Gripple Seismic kits.
SEISMIC BRACING
Page 16
Part Rod Base Nut
Number Size Material Driver
SWG20 3/8" Wood #14SW
SWG25‐380 3/8" Wood #14SW
SWDR1‐1/2 3/8" Steel #14SW
SWDR516 3/8" Steel #14SW
SWXP35 3/8" Purlin UXPIT
SWC20 3/8" Concrete #14SW
Function: UL tested to Standard 203A to meet the requirements
of branch/end of line restraint using 3/8" or 1/2"
all thread rod to eliminate lateral sway bracing
per NFPA 13. Up to Schedule 40 pipe 2" or less.
Approvals: Underwriters Laboraties UL 203A File EX 5098Materials: Carbon Steel
SWG SWDR SWXP SWC
Part Rod Base Nut
Number Size Material Driver
SH‐GST20 3/8" Wood #14SH
SH‐CST20 3/8" Concrete #14SH
SXP20 3/8" Steel UXPIT
SXP35 3/8" Purlin UXPIT
SH‐GST2.0 1/2" Wood #14SH
SH‐CST2.0 1/2" Concrete #14SH
SH‐TEK5.0 1/2" Steel #14SH
SXP2.0 1/2" Metal Deck UXPIT
UXPIT #14SW #14SH SXP3.5 1/2" Purlin UXPIT
UNIVERSAL RED ORANGE
ITW CCNA literature, approvals and submittals
should be consulted when designing or installing
seismic bracing systems using ITWBuildex products.
GST CST XP TEK
Sidewinder
Swivel Head
SEISMIC BRACING
Page 17
Strength Design+ Anchoring Systems
Power‐Stud™+
Sizes SD1 SD2 SD4 SD6
0.25X01.75 * * *0.25X02.25 * * *0.25X03.25 * * *0.38X02.25 * * *0.38X02.75 * * *
Function: One piece, fully threaded, wedge style 0.38X03 * * * *anchor for use in solid concrete. 0.38X03.50 * * * *
0.38X03.75 * * * *
Materials: Carbon and/or Stainless Steel 0.38X05 * * * *0.38X07 *0.50X02.75 * * *0.50X03.75 * * * *0.50X04.50 * * * *
Carbon steel body and carbon steel clip. 0.50X05.50 * * * *CODE LISTED: **ICC‐ES ESR 2818 0.50X07 * * * *
0.50X08.50 * *0.63X03.50 * * *0.63X04.50 * * * *0.63X05 * * * *
Carbon steel body and stainless steel clip. 0.63X06 * * * *CODE LISTED: **ICC‐ES ESR 2502 0.63X07 * * * *
0.63X08.50 * * * *0.63X10 *0.75X04.25 * * *0.75X04.75 * * *
Type 304 stainless steel body plus stainless steel clip. 0.75X05.50 * * * *
CODE LISTED: **ICC‐ES AC193 0.75X06.25 * * * *0.75X07 * * * *0.75X08.50 * * * *0.75X10 * *0.75X12 *
Type 316 stainless steel body plus stainless steel clip. 0.88X06 *CODE LISTED: **ICC‐ES AC193 0.88X08 * *
0.88X10 *01X06 * *01X09 * *
Powers® Fasteners literature, approvals and submittals 01X12 * *should be consulted when designing or installing 01.25X09 *seismic bracing systems using Powers products. 01.25X12 *
SD1
SD2
SD4
SD6
SEISMIC BRACING
Code Listed: **See Each Type
Page 18
Strength Design+ Anchoring Systems
Wedge‐Bolt™+
Sizes0.25X01.250.25X01.750.25X02.250.25X030.38X01.75
Function: One piece, heavy duty hex head anchor for use 0.38X02.50in solid concrete. Vibration‐resistant. 0.38X03
0.38X04
Materials: High Strength Carbon Steel 0.38X050.38X060.50X020.50X02.500.50X030.50X040.50X060.50X060.50X06.500.50X080.63X030.63X040.63X050.63X060.63X080.75X030.75X040.75X050.75X06
0.75X080.75X10
Powers® Fasteners literature, approvals and submittalsshould be consulted when designing or installingseismic bracing systems using Powers products.
SEISMIC BRACING
Code Listed: ICC‐ES ESR‐2526
Page 19
Strength Design+ Anchoring Systems
Power‐Bolt™+
Sizes0.25X010.25X01.750.25X030.31X01.750.31X02.50
Function: Heavy duty sleeve style undercut anchor for use 0.31X03.50in solid concrete. Vibration‐resistant. 0.38X01.88
0.38X02.25
Materials: Carbon and/or Stainless Steel 0.38X030.38X03.330.38X040.50X02.750.50X03.750.50X04.750.50X05.750.63X030.63X040.63X050.63X060.63X08.500.75X03.250.75X04.250.75X05.250.75X07.25
0.75X08.25Flat Head 0.38X03.75Flat Head 0.38x05Flat Head 0.38x06Flat Head 0.50x05
Flat Head 0.63x05.50
Powers® Fasteners literature, approvals and submittalsshould be consulted when designing or installingseismic bracing systems using Powers products.
SEISMIC BRACING
Code Listed: ICC‐ES AC193
Page 20
Strength Design+ Anchoring Systems
Tapper®+
Sizes0.19X01.250.19X01.750.19X02.250.19X02.750.19X03.25
Function: Screw anchor for light to meduim duty applications. 0.19X03.75Perma‐Seal for corrosion resistance. 0.19X04
0.25X01.25
Materials: Carbon Steel 0.25X01.750.25X02.250.25X02.750.25X03.250.25X03.750.25X04
Available in both Hex Washer Head & Phillps Flat Head 0.25X06
Smart DI™+ Anchor (Drop‐In)
Sizes0.25 *
Function: Machine bolt anchor for use in solid concrete, 0.38 *hard stone and solid brick. 0.50 *,+
0.63
Materials: Carbon and/or Stainless Steel 0.75 +
Safe‐T+Pin™
SizesFunction: One piece nail drive anchor for use in concrete, 0.25X01.38
stone and brick. 0.25X02.50
Materials: Carbon Steel
Powers® Fasteners literature, approvals and submittals
should be consulted when designing or installingseismic bracing systems using Powers products.
SEISMIC BRACING
Code Listed: ICC‐ES AC193
Code Listed: ICC‐ES AC193
Code Listed: ICC‐ES AC193
Also available (*)lipped or with (+)coil thread
Page 21
Strength Design+ Anchoring Systems
Vertigo™+
Rod Screw
Function: One piece threaded fastening system for concrete. Size Size & Lentgh
0.25 0.38X02.13
Materials: Carbon Steel 0.38 0.38X02.14
Snake+™
Sizes
Function: Machine bolt anchor for use in solid concrete. 0.25
0.38
Materials: Carbon Steel 0.50
Requires special setting tool
Atomic Undercut™
Sizes*,=
Function: Undercutting anchor in cracked and uncracked concrete. +
*,=
Materials: Carbon Steel +
0.50x09.75 +
0.63X07.75 *,=
Available in both Standard and Through Bolt type 0.63X10.75 +
Materials (*) Grade A36 +
(+) Grade A193 B7 *,=
(=) Stainless type 316 +
Powers® Fasteners literature, approvals and submittalsshould be consulted when designing or installingseismic bracing systems using Powers products.
SEISMIC BRACING
0.50X08
0.38X05.50
0.38X06.75
0.50X07
0.75X13.63
0.75X08.63
0.63X12.25
Code Listed: ICC‐ES AC193
Code Listed: ICC‐ES ESR‐2272
Code Listed: ICC‐ES AC193
Page 22
ISAT's Blue Banger Hanger
SizesSDI 1/4, 3/8 & 1/2"
3/8, 1/2 & 5/8"
5/8 & 3/4"
PIP 1/4, 3/8 & 1/2"
3/8, 1/2 & 5/8"
5/8 & 3/4"
RDI 3/8, 1/2 & 5/8"
Function: Multi‐threaded rod hanger anchor, fully cracked concret tested
for vertical and dynamic static loads.
Code Listed: UL listed, FM and OSHPD Approved. OPA‐0485‐07
Materials: Carbon Steel, Plastic
ISAT® literature, approvals and submittals
should be consulted when designing or installing
seismic bracing systems using ISAT products.
SEISMIC BRACING
Page 25
CARPENTER & PATERSON, INC.
TERMS and CONDITIONS of SALEEffective 10-1-2014
8. TAXES: The amount of taxes applicable to the sale of material or services shall be added to the purchase price and shall be paid by buyer unless buyer provides seller with an exemption certificate acceptable to the taxing authorities.
9. PRICING INFORMATION: Orders of any size will be accepted. However, orders less than $150.00 will be subject to a $25.00 handling charge in addition to the cost of the material and freight, if any. Prices are subject to change without notice. We are not responsible for typographical errors.
10. TERMS: Net thirty (30) days; 1-1/2% per month service charge (18% per annum) will be charged on all delinquent accounts plus court costs and attorney fees.
Buyer shall defend, indemnify and save seller harmless from any and all liability or alleged liability, expenses, including legal fees arising from personal injuries including death or damage to property caused by reason of improper and/or negligent installation of pipe hangers designed and fabricated by seller.
In accordance with our product development program, we reserve the right to revise the design and application of our products without notification. For latest product information, please contact the nearest Carpenter & Paterson office.
7. WARRANTY: Carpenter & Paterson, Inc. warrants for one (1) year from date of shipment that all products of Carpenter & Paterson manufacture will be free from defects in material and workmanship when used for the purpose which Carpenter & Paterson recommends. Carpenter & Paterson warrants the products which it sells of other manufacturers only to the extent they are warranted to Carpenter & Paterson by the supplier. Claim for breach of the above warranty must be made within thirty (30) days from the date the material was determined by the Buyer to be defective or in any event within twelve (12) months from the date of delivery to the original users, unless otherwise stated. If Carpenter & Paterson deems to its satisfaction that the products are defective, the product will be repaired or replaced by Carpenter & Paterson, and no other charge will be allowed for labor or expense in repairing or replacing said product by the Buyer. In any event the amount of any adjustment shall not exceed the net sales price of the defective product.
Where engineering design or fabrication work is supplied, Buyer’s acceptance of Seller’s design or delivery of work, shall relieve Carpenter & Paterson of all further obligation other than as expressed in Carpenter & Paterson’s product warranty. The foregoing constitutes the Purchaser’s sole and exclusive remedy under Carpenter & Paterson warranty.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF FITNESS OR FITNESS FOR A PARTICULAR PURPOSE. CARPENTER & PATERSON MAKES NO WARRANTY OF MERCHANTABILITY. IN NO EVENT AND UNDER NO CIRCUMSTANCES WILL CARPENTER & PATERSON BE LIABLE FOR PERSONAL INJURY OR PROPERTY DAMAGE ARISING IN ANY MANNER OUT OF THE USE OR APPLICATION OF THE GOODS. UNDER NO CIRCUMSTANCES AND IN NO EVENT WILL CARPENTER & PATERSON BE LIABLE FOR CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES WHETHER FOR BREACH OF CONTRACT OR WARRANTY, NEGLIGENCE, OR ANY OTHER TORTIOUS ACT OR OMISSION.
The terms of this warranty can be modified or changed only by authorization in writing by an officer of Carpenter & Paterson, Inc. Carpenter & Paterson neither assumes, nor authorizes any person to assume for it any obligation in connection with the sale of its products or parts of products which have been repaired or altered outside of Sellers factory; subject to misuse, negligence, or accidents; or used in a manner contrary to the Seller’s instructions or recommendations. Seller shall not be responsible for design errors due to inaccurate or incomplete information supplied by the Buyer, or its representative. Carpenter & Paterson, Inc. reserves the right to revise product design without notification.
1. PRICES & DESIGNS: Prices and designs are subject to change without notice. All prices are F.O.B. point of shipment, unless otherwise stated.
2. DELIVERY: Seller will make every effort to complete delivery of products as indicated on seller’s acceptance of an order, but seller assumes no responsibility or liability, and will accept no backcharge for loss or damage due to delay or inability to deliver caused by acts of God, war, labor difficulties, accident, delays of carriers, contractors or suppliers, inability to obtain materials, shortages of fuel and energy, or other causes of any kind beyond the control of seller. Under no circumstances shall seller be liable for any special or consequential damages or for loss, damage, or expenses directly or indirectly arising from delays or failure to give notice of delay.
3. SHIPMENTS: All products shipped will be carefully examined, counted, and packed. No claim for shortages will be allowed unless made in writing within ten (10) days of receipt of shipment. Claims for products damaged or lost in transit should be made on the carrier as seller’s responsibility ceases and the title passes on delivery to the carrier.
4. FREIGHT: All prices are F.O.B. point of shipment. On shipments weighing 2500 pounds or more, rail freight or motor freight at the lowest published rate is allowed to all US rail points or all US highway points listed in published tariffs (Hawaii and Alaska excluded).
5. RETURNS: Seller cannot accept the return of any product unless its written permission has been first obtained. Credit will be allowed on the basis of the price charged for the merchandise less a standard handling charge of twenty percent (20%) and less any freight charges allowed or paid by seller. Material not in first class salable condition will be subject to the total cost of reconditioning. Special, non-standard, and made-to-order products (either published or unpublished) are non-cancelable / non-returnable.
6. PRODUCT APPLICATION: Seller’s products are intended for installation and service as illustrated or described in seller’s catalog. Seller shall not be responsible for any losses or damage sustained by the buyer or any other person as a result of misapplication.
001/020 770 ‐ CSBQIK 010 1000 SB1030/040 776 ‐ CSBQIKCSE 015 1001 SB2035 ‐ ‐ ‐ ‐ ‐ SB3‐ ‐ B386 ‐ 040 4B SB4‐ ‐ ‐ CSBEZU 031 4L SB5
078/410 775 ‐ ‐ 050 ‐ SB6070 771 ‐ ‐ 025 910 SBF1072 ‐ ‐ ‐ 890 975 SBF2078 ‐ ‐ ‐ 049 ‐ SBF3076 774 ‐ CSBUNIV 030 980 SBF4077 ‐ ‐ ‐ 051 909 SBF5079 ‐ ‐ TP240 054 907 SBF6087 778 ‐ CSBBARJEG 035 825/825A SBF7080 779 ‐ CSBMA 025 906 SBF8615 777 ‐ ‐ 020 75 SBF9086 772 ‐ CSBIB 045 800 SBF10535 ‐ B3223 38 37 ‐ SES310 773 ‐ LHSR6 055 25 SR17600 AS3500 SC228 VS 7600 98 SRS‐ 95 B351L 200 250 64 47‐ 89 B3362‐5 255C 259 ‐ 22
100 92 B3034 300 350 65 192105 94 B3033 310 360 66 192W160 89X 3367 300C 359 69 192RS162 ‐ ‐ 34SL 358 69R 192RSR‐ ‐ B3170 100 151 2 800 E
300 69 B3170NF 115 141 200 800FP E372 260 B3100 ‐ 450 ‐ 100D372 260 B3100 401 451 ‐ 100D E400 261 B3373 ‐ 550 6 126D400 261 B3373 510 551 6 126D E 611 128R B3199R 365M 940 78 85RT610 ‐ ‐ 365 940‐S ‐ 85RTSTP552 207 B3060L 32B 906 56 153S‐ AS100 B11 E12 1501‐1542 ‐ M112‐ AS150 B12 D12 1601‐1642 ‐ M122‐ AS200 B22 & B24 A12 & A14 1001‐1142 ‐ M132‐ AS300 B32 B12 1701‐1742 ‐ M142‐ AS500 B52 & B54 C12 & C14 1201‐1342 ‐ M164‐ ‐ ‐ ‐ ‐ ‐ 2HSC‐ ‐ ‐ ‐ ‐ ‐ 3HSB‐ AS9402 B335‐1 ‐ ‐ 912 SH200‐ AS9403 B335‐2 ‐ ‐ 913 SH300‐ AS9404 B335 ‐ ‐ 914 SH400‐ ‐ ‐ ‐ ‐ 990 SCB‐ ‐ ‐ ‐ ‐ 991 SCBH‐ ‐ BKW SLD ‐ ‐ GAC‐ ‐ ‐ ‐ ‐ ‐ SCC‐ ‐ ‐ ‐ ‐ ‐ WRT‐ ‐ BKCC ‐ ‐ ‐ HFWRC
TOLCO
CROSS REFERENCEC&PAFCON ANVIL B‐LINE ERICO PHD
MASSACHUSETTS MARYLAND NEW JERSEY (South)225 Merrimac Street 8941 D'Arcy Road 3900 River Road
Woburn, MA 01801 Upper Marlboro, MD 20774 Pennsauken, NJ 08110
Telephone: (781) 935‐2950 Telephone: (301) 333‐4631 Telephone: (856) 488‐1988
Fax: (781) 935‐7664 Fax: (301) 333‐4638 Fax: (856) 488‐0824
CALIFORNIA CANADA5097 Zambrano Street 921 Barton Street, Unit 3
City of Commerce, CA 90040 Stoney Creek, ON L8E 5P5
Telephone: (323) 622‐1830 Telephone: (905) 664‐6866
Fax: (323) 622‐1837 Fax: (905) 664‐2751
NEW JERSEY (North) PENNSYLVANIA LOUISANIA369 Jefferson Avenue 484 Galiffa Drive 434 Latigue Road
Saddle Brook, NJ 07663 Donora, PA 15033 Waggaman, LA 70094
Telephone: (973) 772‐1800 Telephone: (724) 379‐8461 Telephone: (504) 431‐7722
Fax: (973) 772‐1833 Fax: (724) 379‐8463 Fax: (504) 431‐7900
EXECUTIVE OFFICES
CARPENTER & PATERSON, INC.225 Merrimac Street, Woburn, MA 01801
Tel: (781) 935‐2950 • Fax: (781) 935‐7664
e‐mail: [email protected]
www.pipesupports.com
C&P SEISMIC BRACINGCONTACT YOUR NEAREST CARPENTER & PATERSON LOCATION AT:
SALES OFFICES AND WAREHOUSES
SALES OFFICES, WAREHOUSES & MANUFACTURING PLANTS
CARPENTER & PATERSON, INC. DESIGNERS • ENGINEERS • MANUFACTURERS