Saws for hollow core slabs and prestressed beams

19
Tensyland Installation for the production of prestressed beams and hollow core slabs Saws Angle saw CF-1300 Angle saw TLA 70º Saw CR-900 Saw S-300 Saw CR-1300

description

Saws for hollow core slabs and prestressed beams Tensyland. http://www.prensoland.com

Transcript of Saws for hollow core slabs and prestressed beams

Page 1: Saws for hollow core slabs and prestressed beams

TensylandInstallation for the production

of prestressed beamsand hollow core slabs

Saws

Angle sawCF-1300

Angle sawTLA 70º

SawCR-900

SawS-300

Saw CR-1300

Page 2: Saws for hollow core slabs and prestressed beams

Saw S-300

Page 3: Saws for hollow core slabs and prestressed beams

Saw S-300

Maximum cutting height 300 mm with blade Ø 900 mmBlade motor 45 kWManual operationWater tank capacity 1000 l with level gauge

Blade Ø ranging 900 mm

Page 4: Saws for hollow core slabs and prestressed beams

SawS-300

300 mm

Maximum cutting height 300 mm

Page 5: Saws for hollow core slabs and prestressed beams

Saw CR-900

Page 6: Saws for hollow core slabs and prestressed beams

Saw CR-900

Blade Ø ranging 900 mm

Maximum cutting height 300 mmAble to cut with blades Ø 700, 800 or 900 mm (only by adjusting the stops)Blade motor power 45 kWOption for programmed cuts (as an option)Enrollers for the electric cable and water hose (as an option)Minimum maintenance

Page 7: Saws for hollow core slabs and prestressed beams

SawCR-900

300 mm

Maximum cutting height 300 mm

Page 8: Saws for hollow core slabs and prestressed beams

SawCR-1300

Page 9: Saws for hollow core slabs and prestressed beams

Saw CR-1300

Blade Ø ranging 1.300 mm

Maximum cutting height 500 mmAble to cut with blades Ø 1.300 mm Blade motor power 45 kWOption for programmed cuts (as an option)Enrollers for the electric cable and water hose (as an option)Minimum maintenance

Page 10: Saws for hollow core slabs and prestressed beams

Saw CR-1300

500 mm

Maximum cutting height 500 mm

Page 11: Saws for hollow core slabs and prestressed beams

Angle sawTLA 70º

Page 12: Saws for hollow core slabs and prestressed beams

Angle sawTLA 70º

Maximum cutting height 300 mm with blade Ø 900 mm45º cuts in one cycle, from 45º to 70º in two cyclesBlade motor 45 kWLongitudinal cutsSemiautomatic operation

Blade Ø ranging 900 mm

Page 13: Saws for hollow core slabs and prestressed beams

Angle sawTLA 70º

300 mm

Maximum cutting height 300 mm

Page 14: Saws for hollow core slabs and prestressed beams

Angle sawTLA 70º

Turning carriageAllowing cuts to 70º

70º

Page 15: Saws for hollow core slabs and prestressed beams

Angle saw CF-1300

Page 16: Saws for hollow core slabs and prestressed beams

Angle sawCF-1300

Blade Ø rangingfrom 800 to 1300 mm

Maximum cutting height 500 mm. Available for higher depthsBlade Ø ranging from 800 to 1300 mmAutomatic and programmable control panelTouch data screen with various programmes to carry out different cutting cycles.Enrollers for the electric cable and water hoseWater tank with pressure unitBlade motor 55 kWTelescopic guard for cutting blade, with automatic positioning systemOptional slurry cleaning system

Page 17: Saws for hollow core slabs and prestressed beams

Angle saw CF-1300

Maximum cutting height 500 mm

500 mm

Page 18: Saws for hollow core slabs and prestressed beams

Angle sawCF-1300

Turnig carriageAllowing cross, longitudinal and all angle cuts.

ANGLE CUT

CROSS CUT

LONGITUDINAL CUT

Page 19: Saws for hollow core slabs and prestressed beams

www.prensoland.com