1

Savage WorldsSavage WorldsSavage WorldsSavage Worlds

Fantasy Grounds 3.Fantasy Grounds 3.Fantasy Grounds 3.Fantasy Grounds 3.4444

Supplemental GuideSupplemental GuideSupplemental GuideSupplemental Guide

Written by Kevin HoganWritten by Kevin HoganWritten by Kevin HoganWritten by Kevin Hogan

2

GM Desktop

This is the main GM desktop you will see after launching a Savage Worlds campaign.

At the time of this writing, the version we are talking about is 3.4.1 (Build 2)

The intent of this document is to show how this rule set leverages the core capabilities of Fantasy

Grounds. The online manual provides a good starting point, but can be confusing when certain features

are not implemented the same way in this ruleset.

I am hoping the feedback from the community will allow me to further enhance this document to make

it as valuable as possible. If I have many any errors, please forgive me, and drop me a suggestion at

krhogan@gmail.com

The official ruleset documentation can be found in the application AppData folder, in the AddOns Folder

(C:\Users\username\AppData\Roaming\Fantasy Grounds II\AddOns\Savage Worlds Ruleset (Savage Worlds Deluxe edition).

3

Chat Window This is the big window on the left side. The functionality of this window is more or less identical to what

the online manual talks about. The biggest difference is that you can play (use) BENNIES by dropping

them on this window.

Rule set Buttons

Here is a description of the buttons and what they do.

Light: This controls the mood lighting of the desktop (no change).

Arrow: This is the dice color control (no change).

INIT: This is the combat tracker. Very different, and I dedicate a section below that

goes over this in detail.

Chase: This allows you to run a Chase per the deluxe rules. More on that later.

Tools: Gives you access to change Wild Die settings, the card shoe, and bennies. More on this later as

well!

PCS: This is the Character Selection Window. Very similar to the core rules implementation with just a

SW skin.

PICS: Portraits window with a SW skin.

PREF: This is where you can set various game options. There are a few new things here, so we are going

to talk about this one below as well.

+/-: This is where you can setup modifiers. Same as core ruleset, just a SW skin.

FX: Effects. This is where you can setup effects. Same as core ruleset, just a SW skin.

Chat bubble: Languages. This allows you to setup languages that the characters can know/use or not.

Thus, you can say things in the chat window (orc or something) that they cannot understand.

There is no Party Sheet in this Ruleset!

There is no Tables button in this Ruleset!

There is no Calendar button or functionality in this rule set! There is an extension for this.

4

Ruleset Icons (Right Edge of Desktop) Story: This is the same as the core rulesets, and provides the GM a way to organize

the campaigns and adventures. It has been skinned for Savage Worlds. It supports

the five major styles which are Chat Frame, Body text, Heading text, List, and Link.

Images: is the shortcut to the items currently in the campaigns (or modules)

images folder. Same as core ruleset. You need to copy files into the folder via the

operating system (i.e. Windows Explorer) and then they are visible here.

Combat Enc.: This is where the GM preconfigures the list of NPCs and monsters

that will be involved in an encounter. New to 3.3 ruleset. More on this later.

Personalities: This is where the NPCs details are kept. Same as core ruleset, just

skinned for Savage Worlds.

Items: This is where details on unique treasure or other items can be stored. The

functionality here is a bit behind compared to the 3.5 or 4 ruleset. You can ONLY

give it a name and enter a description; there is not a weight, aura, or any other

fields to speak of. Also, no parcels tab.

Vehicles: This is something unique to the Savage Worlds ruleset. You can setup

some basic vehicle types and load some basic stats about them here, such as

Acceleration, Top Speed, Toughness, Crew, Cost, Notes, and Weapons. They cannot

be added to the Chase tracker at this time.

Notes: As with the basic ruleset, this is a way for players or the GM to save and

store notes regarding a particular campaign or adventure.

Library: Like the core ruleset, this icon opens a window to allow you to view active

modules and is where you will find the SW Deluxe GM guide and Player Guide. Be

sure to activate these modules via the MOD button at the top of the screen.

There is a number of items in these modules that you can drag and drop onto

character sheets, NPC sheets, and so forth. In particular, you drag weapons, skills,

edges, and hindrances into the character sheet. There are also several vehicles you

can add to the Vehicles group that make it much faster to get your adventure up

and running! The Quick Links page is particularly helpful in the Player Guide.

Tokens: The functionality of this is exactly the same as it is for the core ruleset. Like

before, you need to use the file system of your computers operating system to get

your own custom tokens into your campaign. See the online guide for more details

on this activity. This ruleset does come with a limited number of Tokens in a bag

called SW Deluxe GM Guide. Many free tokens have been added!

5

In the lower left corner, we have the modifier star and additional damage die. It looks like this below

and has three new mini icons added to it in 3.4.

The three mini icons, from top to bottom, automatically apply a wound modifier, fatigue modifier, or

encumbrance modifier. These do NOT apply to NPCs only to players!

Left click on this die to a make it active as shown when a player gets a raise

on their To Hit roll (i.e. Fighting or Shooting roll). When they roll damage,

the extra 1d6 will be added.

6

Deeper Dive Combat Tracker

The picture above shows the Combat Tracker with JUST the 3.4. Below shows the combat tracker with

the Enhanced Combat Tracker Extension enabled (See thread by Ikael for details - Link to Thread).

7

Here is a fully populated combat tracker. Lets talk about each element and what it does.

#1. These five icons will globally (for entries in the tracker) toggle a value on or off. The Shield toggles

the defense stats on and off, which are displayed under the entry.see #5.. The defensive traits shown

are Pace, Parry, Toughness, and Armor. The next icon is sort of a square and display movement data

which is Space, and Reach. The sword icon provides access to the traits and skills of this entity. This info

can be dragged and dropped onto the chat window to make this roll or double-clicked. This helps make

the combat fast for the GM. Players will typically be using the values off their character sheet, which

also supports drag and drop and double-click dice rolls.

Between you and me, this is what makes FGII great. The person icon with the glow is effects. This

allows you to apply an effect (that winds down each turn) to the entity.

8

Last, but not least, is the eyeball icon. This controls makes the NPCs either visible or not visible to the

player version of the combat tracker.

#2. This strip of icons are specific to the entity named to the immediate left. In this example, this block

is for the Crocodile #86. Starting from left to right, they are as follows:

Wounds this combatant entity has. GM can click in the box and type a value 1, 2, 3, etc.

Shaken icon. Toggles the shaken condition on and off. Light gray = off.

INC icon. Toggles Incapacitation condition on and off.

This face is red, yellow, green, or empty. The background under the entity on the map

will match this color, so typically foes are red and players are green.

Shield icon. Show or hide the defensive stats for just this entity Pace, Parry,

Toughness, and Armor.

Square icon. Show or hide movement stats Space, and Reach. These values will also

be displayed as overlays of the entity on the battle map.

Show or hide the trait and skills for the entity. Double-click on them to make a roll!

Show or hide the effects for this entity.

Show or hide this NPC on the players combat tracker. You can use this to toggle on

just the NPCs you want the players to see.

#3. This is a link to player or NPC detail sheet. Left click it to see the detail sheet. Drag it down into the

combat tracker to clone the NPC onto a new line. Drag onto #7 to add the item as a member of a group.

#4. This is the Bennies counter. Drag and drop Bennies from the Bennie Coin in from the Tools toolbox.

Drag from here onto the Chat window to spend the Bennie. An Icon and message indicating who used

the Bennie will show up. See below.

#5. This section is the stat details area. We are seeing defensive and attack (trait/skill) stats right now.

This info is shown or displayed based on which global and local icons have been clicked.

9

#6. This is the control bar for the combat tracker. The icons do the following:

Red Flag Icon

Can be dragged and dropped on the entity you want to be the active entity. When

the round begins, a smaller version of this icon will show up in the notch next to the

active entity, as shown in #8. The flag on #8 can also be dragged to another

combatant entity.

Moves the active entity flag (above) to the next entity that has initiative. This is

how you advance to the next player/NPC during gaming. If you hover over this,

you will see its title Next Combatant

Is miss- labeled, and should read share. Click this right after you get the combat

tracker setup and are ready for players to see it. With just the 3.3 ruleset, this will

also bring up a copy of the players combat tracker on the GM machine. With the

SWFI extension loaded, it just shares the combat tracker and says so in the chat

window!

The green, yellow and red faction faces can be dragged and dropped onto

combatant entities. Use them to quickly change an entity to something else.

This is added by the SWFI extension. It gives you the options: A-Close for all, B-

Minimize, C-Clear entire tracker, remove NPCs, Add PCs, and remove PCs. See the

entry SWFI Combat Menu below for more details.

This white box is editable. Normally, when you advance to the next round by

clicking the Next Combatant button, this field will increment by one when you

start a new round. You can manually change the round in case of a mistake.

This is the last button in the control bar, and moves the counter to the next round.

It will deal new initiative cards, increase the round counter, and move the active

combatant flag to the top of the window. The combatants are automatically re-

ordered.

#7: This icon is used to create combat groups that share the same initiative card. So, for example, if you

want to have 5 kobolds in one group, you would drop the kobold NPC link onto this icon.

#8: This is the active combatant flag. It can be dragged and dropped onto another entity to set that

entity as active. In normal play, you might only need to move it back if you accidentally advanced to the

next combatant.

#9: This is the visibility setting for this combatant entry. Three options are available:

V Stats visible to players

(This is the default)

N Name shown to players

U Nothing shown to players

10

This shows an example of each state. On the left are the GM settings, in the right window are the

results.

#10. This is the combatant token. It can be dragged on dropped on the battle map. If it is blank, you

dont have a token associated with this combatant. Go to the Token box and drag and drop a token

here to setup a token for this combatant.

#11. This is the Initiative card for the combatant. For those not familiar with Savage Worlds, initiative is

determined by drawing cards from a 52 deck of cards. High card wins. Jokers add a +2 to rolls, so your

players will always want a Joker! You can right-click on this card and select Deal to deal another card

to this combatant. You can also right-click and select On Hold to put this combatant on hold. The card

will turn a light grey, which is how you can tell this combatant is on hold. See the Savage Worlds Player

Guide, Combat, Initiative, for more information about being On Hold.

There are some good videos on YOUTUBE that show the combat tracker and explain it.

Here is a link: http://www.youtube.com/watch?v=o75sLaHgOcg

https://www.youtube.com/watch?v=M5e7JBie32Y...Savage Worlds 3.4 by Doswell

https://www.youtube.com/watch?v=zjCaxMVkSs8&feature=c4-

overview&list=UUHSJY58TshY6mBFZvhCSkOQ 3.4 update feature

11

Closer Look Menu Radial Options

Here are the choices when you click the Menu button.

12

If you right-click on the initiative card, you get the following radial menu:

This is what the combat

tracker looks like

minimized.

See the online manual for a full description of what these do. Basically you should clear the entire

tracker either before using it or right after so you are ready for the next use. Minimize when you need

to refer to other windows or data (a good reason to get two monitors FG2 supports them!) Use the

Delete combatant when a NPC is eliminated and use the deal option when an edge or effect gives a

player this option. I recommend using the Combat Encounters to add combatants.

NOTE: 3.4 removed the Add Item (Combatant) option.

13

How to Drag and Drop a Bennie to the Combat Tracker

Tokens and the Combat Tracker

Notice that a white overlay will show on the battle map when the combatant is active. The overlay

should show the reach of this combatant. This value should be set before you put the token on the

battle map or you will get an error and it will not expand the overlay. To add the tokens to the battle

map

14

Combat Encounters Using combat encounters is a good way to save some time during game play getting the combat tracker

setup. It allows you to setup the group of monsters/ NPCs that the players are likely to encounter in a

particular location. The screen below show an example where we have created a Nazi Camp

encounter where there will be two SS combatants in the encounter.

When the players activate this encounter, clear out the combat tracker, and then click on the Add to

combat tracker button on the lower left corner of the encounter. Next add the players, place the

tokens and you are good to go!! Fast!

You can add NPCs from an Archetype or monster listed in the Deluxe Guide (in the library), an NPC from

a Monster module you have created, or from a module you have purchased.

Chase Tool

The color border of this tool is gold, versus the dark brown of the combat tracker.

This is what the chase tool looks like just after I drag and

drop players and NPC combatants to it. There is a very

good video of this tool on YOUTUBE done by DOSWELK. The

link is: http://www.youtube.com/watch?v=F4hQQ8waCzk

Click the big brown button to deal the initial card, and the

shoe if the combatant gets any additional cards due to

effects, edges, or raises. The GM or the players can then

double click on the card they want to use.

Be sure to click the mini button to share the chase tool

with the players!!

15

Lets break this down and go over the major aspects of this new, exciting tool.

#1.: Like the combat tracker, this is a way to toggle certain things on and off, just like the combat

tracker.

Shield Icon Show/Hide defensive stats Parry; Toughness; Armor.

Square Icon Show/Hide movement stats Pace; Space; Reach

Person Icon Show/Hide effects Effect name; rounds remaining; reducer

Eyeball Icon Show/Hide combatant in the player chase view

#2.: The card shoe. Click this to deal a second (or third, etc.) card to the player if they get one due to an

Edge, effect, or raise. All cards dealt will then be displayed side-by-side so you can pick the one you

want.

#3.: This is a link to the combatant detail sheet. Left-click to open the detail sheet.

#4: This is the Bennie counter. Drag and drop a Bennie from here to the chat window to use it! Use the

Tools to load Bennies onto this icon if necessary.

#5: This is the card that was dealt to the player. Recall that CLUB is a complication. Read more about

this in the SW Deluxe Player Guide under Chases. This is why a player might want to select a different

(and lower) card to avoid the complication (bad thing). This area can be toggled off via the button in

the control bar at the bottom that looks like three cards. See #6 below.

16

#6.: This is the command bar, similar in function to the one in the combat tracker. Here is the function

of each button.

Red Flag Icon

Drag and drop this to identify the active combatant in the chase.

Next Combatant Icon

Move the flag to the next combatant in terms of initiative. This is what you

click to get the chase under way after everyone has a card.

Mini button

This button shares the chase tool with the players. Click this 1st

!

Re-order Combatants

Click this button after everyone has select the card they want to use for

initiative. This will order the combatants for this round.

Faction faces

Same function as the combat tracker. Helps you keep the friends and foes

organized. Drag and drop to change the combatants, or left-click on the icon

in the combatant you want to change to cycle through the options.

Toggle cards

This hides the cards and shows the combatant stats that are set to display.

This is the round counter. You can click in the field and edit the number if

things get out of wack.

#7: This is the combat initiative area. It shows:

Card

This is the card that this combatant will use to determine their initiative in

the chase. Higher is better! You get advantage when you have a higher

initiative and can attack combatants with lower initiative.

The combatants name. The #100 is a random number I have added to make

it easier to identify combatants that have the same name (i.e. Pirate now I

get Pirate #1 and Pirate #20)

Players Token image

Visibility control. V = Visible, N = Name only, U = Unknown (show nothing)

The next screenshot shows the players view of the chase tool on the left (after you click on the Mini

button) and the GM Chase view on the right.

17

Tools

Here is the window you will see when you click the Tools button:

Right click on the Wild! Icon to access the Wild Die settings radial menu. Here is what that looks like:

Close the window

Toggle Wild Die on and off. Wild Die are extra die Wild Card Players get to

throw when they make a trait check or skill roll. See the Deluxe rules for

details. This is one of the benefits of using FG2 Automated Wild Die!

Fantastic!

Set the Wild die type. The default is 6.

Card Shoe: This icon opens another window where you can deal cards to a public pile. Right click on it to

select Reshuffle , Reload, and Reshare hands.

GM Coin: ????

Bennie Coin: This is the Icon you will drag and drop onto Bennie counters onto NPC and character

sheets. It will award 1 Bennie in this manner. To give the players their standard number of Bennies at

18

the beginning of a game, go to the character selection window (PCS) and click on the gray box in the

upper right corner of the Character. . This will change to a stack of Bennies .

The Adventure Deck Icon will only show in the Tools menu if you have purchased and installed the

Adventure Deck, and have set it up properly. Refer to the documentation located in the Addons folder

(C:\Users\username\AppData\Roaming\Fantasy Grounds II\AddOns\Savage Worlds Action & Adventure Deck).

Character Selection Notes As stated before, you can bring up the Character selection window by clicking on the PCS button in the

upper right hand corner of the desktop. It is also not obvious how to add a portrait Start by opening

both the Character Selection window and the Portrait window. Then drag and drop a picture onto the

white space directly to the left of the character name where the portrait should be. There is a bug with

adding portraits, and you will need to close and re-open the window to see the portraits.

Click on the Menu button on the bottom middle of the window and select Import to import

characters.

19

Preferences and Options

3. Rule set Options-Top 3.4 Rule set Options Bottom

NOTE: Adventure Deck will add more options

My favorite settings are:

Dice Tower (ON) and

Show GM dice rolls (ON

I like this since I can the roll on the Chat window when I want to the

players to see the results, and on the dice tower when I need the results

hidden. These two settings work together, so if you just one is on the dice

tower is not visible!

PC token size (Med)

Better for older eyes.

Auto-redeal initiatives (on)

The deck gets shuffled automatically and I dont need to do this manually.

Auto NPC numbering

(Random)

Adds a random number to the end of the PCS and NPCS, making it easier to

find a particular combatant on the battle map. Hover over a token to see

its name and number!

Deal card announcements

(Brief)

Verbose might tell the players more about the NPCs than you want

Power points on PC

portrait (GM + PC)

Good to know how much magic juice the player has left in games where

characters are magic users or consume power points.

20

Character Sheet One of the real advantages of using FG2 over other virtual tabletop games is its fantastic

implementation of character sheets. They really got this right in my opinion. The functional capability

of this sheet has been enhanced to support this rule with items such as a tracker for Wounds, Fatigue,

Shaken status, etc.

#1: Like other character sheets, this section has a Name field and other fields relevant to this ruleset

including a Settings field, Race field and Rank field. Rank in Savage Worlds can be Novice, Seasoned,

Veteran, and Legendary. We also can keep track of XP, Bennies, and Power points (Remaining /

Maximum). The far right shows our character portrait and chat bubble. Click on this chat bubble before

typing in the chat window to have your characters name added

.

#2: There are a number of tabs on the right hand side depending upon the extensions you have loaded.

The Adventure deck, for example, add a tab called Adv Card. Here is a quick snapshot of some of the

other tabs and a short description of the contents.

21

Main The character overview. See screenshot above!

Skills

Provides access to skills, edges, and

hindrances for this character.

Unskilled is now automatically

added.

Clicking on the tiny stars in the

upper left cover of each skill adds

them to the mini-sheet.

Inventory

The stuff this character has.

In 3.4, this was enhanced a lot. Now

tabs for Mundane, Weapons, Armor,

Vehicles, and Notes added.

Encumbrance data added.

Notes

This is an area to keep track of

background information about the

character, including notes about

languages, allies, and vehicles.

22

Adv Card

This is added by the Adventure deck.

Shows any adventure cards this

character currently has available for

play.

#3: This section shows the attacks (weapons) and powers for the character. There are a number of

items that can be dragged or clicked here. Here is a summary:

To the right of the weapon is an icon that shows the TYPE of attack

this is. The double arrow head is a ranged attack. This adds the

ammo button. See below.

The ax icon is a melee attack.

The single arrowhead is a throw attack.

Ammo button. Click this to reduce the available ammo by 1 unit.

Right-click to get option to expend single shot, double tap, burst,

or automatic fire.

These are the ammo options if you right click on the ammo icon

above and then select the Use ammo. Option.

Double-click on this or drag to the chat window to make a damage

roll for this weapon.

If you right-click, you will get a selection wheel shown below.

23

Starting at the 12:00 icon which is an X in a circle, will close the

character sheet. At 1:00 we have Minimize character sheet option,

then Create-Sub Attack, then Edit, then Create attacks, then

Delete attacks, and finally Mark as non-equipment.

Under edit, you will get the choice to either Update (if a character

has had their attributes affected by something and their damage

needs to be higher or lower) or clear.

Drag this object to another character to add this item (and its

associated data) to that person. Very handy for moving a common

gun to another character.

TIP: Open the Player Guide in the Library and use the links here to

drag weapons here!

Drag this object to the Modifier Star (lower left on desktop) to add

modifier to next roll.

#4: This section contains the characters attribute traits, derived stats, and a way to track their health

condition (Wounds, Shaken state, Incapacitated state, and fatigue. They are toggles, so you can click

them on and off. There is a mini button here as well. This is very nice for players. During play, if you

have this up, you can click on the boxes or conditions as they occur or clear. To get the attack window

(which is dockable) click the attack button in the top right side of this mini window, then drag the

attack window to where you want it (or dock to the mini window so they move as one).

24

To get the attacks to show in this window, you need to click the small star next to each weapon on the

main page as shown below.

Savage Worlds Enhancement Extensions These are free extensions that were released by the community member Ikael. I found it on the Savage

Worlds message board on the Fantasy Grounds web site. The http link (as of this writing) was:

https://www.fantasygrounds.com/forums/showthread.php?19202-Savage-Worlds-Enhancement-

Extensions

I think this is a very useful extension. Take a look at the post for more details about this extension.