Sauter Face Mounted VDI 50_DIN 5480_left_WTO_En
Transcript of Sauter Face Mounted VDI 50_DIN 5480_left_WTO_En
8/17/2019 Sauter Face Mounted VDI 50_DIN 5480_left_WTO_En
http://slidepdf.com/reader/full/sauter-face-mounted-vdi-50din-5480leftwtoen 1/2511.01.08 © WTO GmbH * Subject to change without notice * www.wto.de
Sauter face mounted VDI 50, DIN 5480, left
8/17/2019 Sauter Face Mounted VDI 50_DIN 5480_left_WTO_En
http://slidepdf.com/reader/full/sauter-face-mounted-vdi-50din-5480leftwtoen 2/25
Radial Square Toolholder, left hand, short, Form B2
48-B2-50x3232
48-B2-50x1001"
48-B2-50x1251 1/4"
Radial Square Toolholder, left hand inverted, short, Form B4
48-B4-50x3232
48-B4-50x1001"
48-B4-50x1251 1/4"
Radial Square Toolholder, left hand, long, Form B6
48-B6-50x3232
48-B6-50x1001"
48-B6-50x1251 1/4"
Radial Square Toolholder, left hand inverted, long, Form B8
48-B8-50x3232
48-B8-50x1001"
48-B8-50x1251 1/4"
Axial Square toolholder, left hand, Form C2
48-C2-50x3232
48-C2-50x1251 1/4"
Axial Square toolholder, left hand inverted, Form C4
48-C4-50x3232
48-C4-20x1251 1/4"
Cut-off holder, adjustable height, left hand
48-AL-50x26SH26
48-AL-50x32SH32
Cut-off holder, adjustable height, left hand inverted
48-ALU-50x26SH26
48-ALU-50x32SH32
Holder for Indexable Insert Drills, internal coolant supply,Form E1
48-E1-50x16Ø 16
48-E1-50x20Ø 20
48-E1-50x25Ø 25
48-E1-50x32Ø 32
48-E1-50x40Ø 40
48-E1-50x50Ø 50
48-E1-50x075Ø 3/4"
48-E1-50x100Ø 1"
48-E1-50x125Ø 1 1/4"
48-E1-50x150Ø 1 1/2"
48-E1-50x2002"
Boring bar holder, internal coolant supply, Form E2
48-E2-50x12Ø 12
48-E2-50x16Ø 16
48-E2-50x20Ø 20
48-E2-50x25Ø 25
48-E2-50x30Ø 30
11.01.08 © WTO GmbH * Subject to change without notice * www.wto.de
Sauter face mounted VDI 50, DIN 5480, left
Static Toolholders
8/17/2019 Sauter Face Mounted VDI 50_DIN 5480_left_WTO_En
http://slidepdf.com/reader/full/sauter-face-mounted-vdi-50din-5480leftwtoen 3/25
Boring bar holder, internal coolant supply, Form E2
48-E2-50x32Ø 32
48-E2-50x40Ø 40
48-E2-50x50Ø 50
48-E2-50x063Ø 5/8"
48-E2-50x075Ø 3/4"
48-E2-50x100Ø 1"
48-E2-50x125Ø 1 1/4"
48-E2-50x150Ø 1 1/2"
48-E2-50x175Ø 1 3/4"
48-E2-50x2002"
48-E2-50x250Ø 2 1/2"
ER Collet Chuck Holder, Form E4
48-E4-50x32ER 32 107532000
48-E4-50x40ER 40 107540000
Plug, Form Z2
48-Z2-50-SSteel
48-Z2-50-PPlastic
11.01.08 © WTO GmbH * Subject to change without notice * www.wto.de
Sauter face mounted VDI 50, DIN 5480, left
Static Toolholders
8/17/2019 Sauter Face Mounted VDI 50_DIN 5480_left_WTO_En
http://slidepdf.com/reader/full/sauter-face-mounted-vdi-50din-5480leftwtoen 4/25
Straight drill/milling unit
EC1:1410126059-50ER 40 00675000124
Right angle drill/milling unitEC1:1410526050-50ER 40 00675000491
Right angle back set drill/milling unit
EC1:1410526067-50ER 40 00675000744
EC = external coolant supplyIC = internal coolant supply
11.01.08 © WTO GmbH * Subject to change without notice * www.wto.de
Sauter face mounted VDI 50, DIN 5480, left
Standard Program
8/17/2019 Sauter Face Mounted VDI 50_DIN 5480_left_WTO_En
http://slidepdf.com/reader/full/sauter-face-mounted-vdi-50din-5480leftwtoen 5/25
Straight drill/milling unit
IC 30 bar1:1410126060-50ER 40 00675000124
Straight offset drill/milling unitEC1:2410116029-50ER 25 00675000720
IC 80 bar1:2410116030-50ER 25 00675000720
Right angle drill/milling unit
IC 80 bar1:1410526051-50ER 40 00675000491
EC = external coolant supplyIC = internal coolant supply
EC1:2410516013-50ER 25 00675000801
IC 80 bar1:2410516016-50ER 25 00675000801
Right angle back set drill/milling unit
IC 80 bar1:1410526068-50ER 40 00675000744
EC2:1410534017-50ER 50 00675000403
IC 80 bar2:1410534018-50ER 50 00675000380
Adjustable angle drill/milling unit
EC1,11:1411020008-50ER 32 00675000093
Offset slitting saw unit
EC3:1411500008-50Typ 19/2 00675000259
160022192 Ø 22
160023192 Ø 7/8"
160025192 Ø 1"
160027192 Ø 27
160031192 Ø 1 1/4
160032192 Ø 32
160038192 Ø 1 1/2
160040192 Ø 40
11.01.08 © WTO GmbH * Subject to change without notice * www.wto.de
Sauter face mounted VDI 50, DIN 5480, left
Enhanced Program
8/17/2019 Sauter Face Mounted VDI 50_DIN 5480_left_WTO_En
http://slidepdf.com/reader/full/sauter-face-mounted-vdi-50din-5480leftwtoen 6/25
Note:With the assembly of the turrets the breakdown outlines of the respective machine specificationare to be considered!The application represented here is only an example.The swing diameters of the turrets depend on machine specificationand turret version.
11.01.08 © WTO GmbH * Subject to change without notice * www.wto.de
Sauter face mounted VDI 50, DIN 5480, left
Tool Interference Diagram - Standard Program
8/17/2019 Sauter Face Mounted VDI 50_DIN 5480_left_WTO_En
http://slidepdf.com/reader/full/sauter-face-mounted-vdi-50din-5480leftwtoen 7/25
Note:With the assembly of the turrets the breakdown outlines of the respective machine specificationare to be considered!The application represented here is only an example.The swing diameters of the turrets depend on machine specificationand turret version.
11.01.08 © WTO GmbH * Subject to change without notice * www.wto.de
Sauter face mounted VDI 50, DIN 5480, left
Tool Interference Diagram - Enhanced Prgram
8/17/2019 Sauter Face Mounted VDI 50_DIN 5480_left_WTO_En
http://slidepdf.com/reader/full/sauter-face-mounted-vdi-50din-5480leftwtoen 8/25
Straight drill/milling unit - for ER style collet DIN 6499Bratio i=1:1External coolant supply
Hola
i (n1:n2)n2 max (rpm)Torque (Nm)Tool-ØTool ClampingShaft-ØItem No.
1:14,0001003-26ER 4050410126059-50
190040xxx00675000124Wrenches
Accessories(not included) Collets ER 40
11.01.08 © WTO GmbH * Subject to change without notice * www.wto.de
Sauter face mounted VDI 50, DIN 5480, left
8/17/2019 Sauter Face Mounted VDI 50_DIN 5480_left_WTO_En
http://slidepdf.com/reader/full/sauter-face-mounted-vdi-50din-5480leftwtoen 9/25
Right angle drill/milling unit - for ER style collet DIN 6499Bratio i=1:1External coolant supply
Hola
i (n1:n2)n2 max (rpm)Torque (Nm)Tool-ØTool ClampingShaft-ØItem No.
1:14,000803-26ER 4050410526050-50
190040xxx00675000491Wrenches
Accessories(not included) Collets ER 40
11.01.08 © WTO GmbH * Subject to change without notice * www.wto.de
Sauter face mounted VDI 50, DIN 5480, left
8/17/2019 Sauter Face Mounted VDI 50_DIN 5480_left_WTO_En
http://slidepdf.com/reader/full/sauter-face-mounted-vdi-50din-5480leftwtoen 10/25
Right angle back set drill/milling unit - for ER style collet DIN 6499Bratio i=1:1External coolant supply
Hola
i (n1:n2)n2 max (rpm)Torque (Nm)Tool-ØTool ClampingShaft-ØItem No.
1:16,000633-26ER 4050410526067-50
190040xxx00675000744Wrenches
Accessories(not included) Collets ER 40
11.01.08 © WTO GmbH * Subject to change without notice * www.wto.de
Sauter face mounted VDI 50, DIN 5480, left
8/17/2019 Sauter Face Mounted VDI 50_DIN 5480_left_WTO_En
http://slidepdf.com/reader/full/sauter-face-mounted-vdi-50din-5480leftwtoen 11/25
Straight drill/milling unit - for ER style collet DIN 6499Bratio i=1:1Internal and external coolant supply - Do not run without coolant! Only use filteredcoolant fluid (max. particle size = 100 µm)Max. coolant pressure = 435 PSI (30 bar) - Do not use for machining cast ironmaterials!Consider coolant pressure diagram D01007!
Hola
i (n1:n2)n2 max (rpm)Torque (Nm)Tool-ØTool ClampingShaft-ØItem No.
1:14,0001003-26ER 4050410126060-50
190040xxx00675000124Wrenches
Accessories(not included) Collets ER 40
11.01.08 © WTO GmbH * Subject to change without notice * www.wto.de
Sauter face mounted VDI 50, DIN 5480, left
8/17/2019 Sauter Face Mounted VDI 50_DIN 5480_left_WTO_En
http://slidepdf.com/reader/full/sauter-face-mounted-vdi-50din-5480leftwtoen 12/25
Straight offset drill/milling unit - for ER style collet DIN 6499Bratio i=1:2External coolant supply
Hola
i (n1:n2)n2 max (rpm)Torque (Nm)Tool-ØTool ClampingShaft-ØItem No.
1:212,000501-16ER 2550410116029-50
190025xxx00675000720Wrenches
Accessories(not included) Collets ER 25
11.01.08 © WTO GmbH * Subject to change without notice * www.wto.de
Sauter face mounted VDI 50, DIN 5480, left
8/17/2019 Sauter Face Mounted VDI 50_DIN 5480_left_WTO_En
http://slidepdf.com/reader/full/sauter-face-mounted-vdi-50din-5480leftwtoen 13/25
Straight offset drill/milling unit - for ER style collet DIN 6499Bratio i=1:2Internal and external coolant supply - Do not run without coolant! Only use filteredcoolant fluid (max. particle size = 100 µm)Max. coolant pressure = 1160 PSI (80 bar)Consider coolant pressure diagram D01013!
Hola
i (n1:n2)n2 max (rpm)Torque (Nm)Tool-ØTool ClampingShaft-ØItem No.
1:212,000501-16ER 2550410116030-50
190025xxx00675000720Wrenches
Accessories(not included) Collets ER 25
11.01.08 © WTO GmbH * Subject to change without notice * www.wto.de
Sauter face mounted VDI 50, DIN 5480, left
8/17/2019 Sauter Face Mounted VDI 50_DIN 5480_left_WTO_En
http://slidepdf.com/reader/full/sauter-face-mounted-vdi-50din-5480leftwtoen 14/25
Right angle drill/milling unit - for ER style collet DIN 6499Bratio i=1:1Internal and external coolant supply - Do not run without coolant! Only use filteredcoolant fluid (max. particle size = 100 µm)Max. coolant pressure = 1160 PSI (80 bar)
Hola
i (n1:n2)n2 max (rpm)Torque (Nm)Tool-ØTool ClampingShaft-ØItem No.
1:16,000633-26ER 4050410526051-50
191040xxx00675000491Wrenches
Accessories(not included) Collets ER 40 with sealant for IC
11.01.08 © WTO GmbH * Subject to change without notice * www.wto.de
Sauter face mounted VDI 50, DIN 5480, left
8/17/2019 Sauter Face Mounted VDI 50_DIN 5480_left_WTO_En
http://slidepdf.com/reader/full/sauter-face-mounted-vdi-50din-5480leftwtoen 15/25
Right angle drill/milling unit - for ER style collet DIN 6499Bratio i=1:2External coolant supply
Hola
i (n1:n2)n2 max (rpm)Torque (Nm)Tool-ØTool ClampingShaft-ØItem No.
1:210,000401-16ER 2550410516013-50
190025xxx00675000801Wrenches
Accessories(not included) Collets ER 25
11.01.08 © WTO GmbH * Subject to change without notice * www.wto.de
Sauter face mounted VDI 50, DIN 5480, left
8/17/2019 Sauter Face Mounted VDI 50_DIN 5480_left_WTO_En
http://slidepdf.com/reader/full/sauter-face-mounted-vdi-50din-5480leftwtoen 16/25
Right angle drill/milling unit - for ER style collet DIN 6499Bratio i=1:2Internal and external coolant supply - Do not run without coolant! Only use filteredcoolant fluid (max. particle size = 100 µm)Max. coolant pressure = 1160 PSI (80 bar)Consider coolant pressure diagram D01013!
Hola
i (n1:n2)n2 max (rpm)Torque (Nm)Tool-ØTool ClampingShaft-ØItem No.
1:210,000401-16ER 2550410516016-50
190025xxx00675000801Wrenches
Accessories(not included) Collets ER 25
11.01.08 © WTO GmbH * Subject to change without notice * www.wto.de
Sauter face mounted VDI 50, DIN 5480, left
8/17/2019 Sauter Face Mounted VDI 50_DIN 5480_left_WTO_En
http://slidepdf.com/reader/full/sauter-face-mounted-vdi-50din-5480leftwtoen 17/25
Right angle back set drill/milling unit - for ER style collet DIN 6499Bratio i=1:1Internal and external coolant supply - Do not run without coolant! Only use filteredcoolant fluid (max. particle size = 100 µm)Max. coolant pressure = 1160 PSI (80 bar)
Hola
i (n1:n2)n2 max (rpm)Torque (Nm)Tool-ØTool ClampingShaft-ØItem No.
1:16,000633-26ER 4050410526068-50
190040xxx00675000744Wrenches
Accessories(not included) Collets ER 40
11.01.08 © WTO GmbH * Subject to change without notice * www.wto.de
Sauter face mounted VDI 50, DIN 5480, left
8/17/2019 Sauter Face Mounted VDI 50_DIN 5480_left_WTO_En
http://slidepdf.com/reader/full/sauter-face-mounted-vdi-50din-5480leftwtoen 18/25
Right angle back set drill/milling unit - for ER style collet DIN 6499Bratio i=2:1External coolant supply
Hola
i (n1:n2)n2 max (rpm)Torque (Nm)Tool-ØTool ClampingShaft-ØItem No.
2:12,0002004-34ER 5050410534017-50
190050xxx00675000403Wrenches
Accessories(not included) Collets ER 50
11.01.08 © WTO GmbH * Subject to change without notice * www.wto.de
Sauter face mounted VDI 50, DIN 5480, left
8/17/2019 Sauter Face Mounted VDI 50_DIN 5480_left_WTO_En
http://slidepdf.com/reader/full/sauter-face-mounted-vdi-50din-5480leftwtoen 19/25
Right angle back set drill/milling unit - for ER style collet DIN 6499Bratio i=2:1Internal and external coolant supply - Do not run without coolant! Only use filteredcoolant fluid (max. particle size = 100 µm)Max. coolant pressure = 1160 PSI (80 bar)
Hola
i (n1:n2)n2 max (rpm)Torque (Nm)Tool-ØTool ClampingShaft-ØItem No.
2:12,0002004-34ER 5050410534018-50
190050xxx00675000380Wrenches
Accessories(not included) Collets ER 50
11.01.08 © WTO GmbH * Subject to change without notice * www.wto.de
Sauter face mounted VDI 50, DIN 5480, left
8/17/2019 Sauter Face Mounted VDI 50_DIN 5480_left_WTO_En
http://slidepdf.com/reader/full/sauter-face-mounted-vdi-50din-5480leftwtoen 20/25
Adjustable angle drill/milling unit - for ER style colletratio i=1,11:1External coolant supply
Hola
i (n1:n2)n2 max (rpm)Torque (Nm)Tool-ØTool ClampingShaft-ØItem No.
1,11:13,000402-20ER 3250411020008-50
190032xxx00675000093Wrenches
Accessories(not included) Collets ER 32
11.01.08 © WTO GmbH * Subject to change without notice * www.wto.de
Sauter face mounted VDI 50, DIN 5480, left
8/17/2019 Sauter Face Mounted VDI 50_DIN 5480_left_WTO_En
http://slidepdf.com/reader/full/sauter-face-mounted-vdi-50din-5480leftwtoen 21/25
Offset slitting saw unit - interchangeable milling arborratio i=3:1External coolant supply
Hola
i (n1:n2)n2 max (rpm)Torque (Nm)Tool-ØTool ClampingShaft-ØItem No.
3:11,500140125Typ 19/250411500008-50
1600xx192160027192Interchangeable milling arbor
Accessories(not included) Interchangeable milling arbor type 161
11.01.08 © WTO GmbH * Subject to change without notice * www.wto.de
Sauter face mounted VDI 50, DIN 5480, left
8/17/2019 Sauter Face Mounted VDI 50_DIN 5480_left_WTO_En
http://slidepdf.com/reader/full/sauter-face-mounted-vdi-50din-5480leftwtoen 22/25
Bushings Ø 25
ø6240020006
ø8240020008
ø10240020010ø12240020012
ø14240020014
ø16240020016
Bushings Ø 25
ø6240025006
ø8240025008
ø10240025010
ø12240025012
ø16240025016
ø20240025020
Bushings Ø 32
ø6240032006
ø8240032008
ø10240032010
ø12240032012
ø16240032016
ø20240032020
ø25240032025
Bushings Ø 40
ø6240040006
ø8240040008
ø10240040010
ø12240040012
ø16240040016
ø20240040020
ø25240040025
ø32240040032
Bushings Ø 3/4 "
ø3/8"240075038
ø1/2"240075050
ø5/8"240075063
Bushings Ø 1"
ø1/4"2400100025
ø5/16"2400100031
ø3/8"2400100038ø1/2"2400100050
ø5/8"2400100063
ø3/4"2400100075
Bushings Ø 1 1/4 "
ø3/8"2400125038
ø1/2"2400125050
ø5/8"2400125063
ø3/4"2400125075
ø7/8"2400125088
ø1"2400125100
Bushings Ø 1 1/2 "
ø3/8"2400150038
ø1/2"2400150050
ø5/8"2400150063
ø3/4"2400150075
ø7/8"2400150088
ø1"2400150100
ø1 1/4"2400150125
11.01.08 © WTO GmbH * Subject to change without notice * www.wto.de
Sauter face mounted VDI 50, DIN 5480, left
Standard bushings - cylindrical
8/17/2019 Sauter Face Mounted VDI 50_DIN 5480_left_WTO_En
http://slidepdf.com/reader/full/sauter-face-mounted-vdi-50din-5480leftwtoen 23/25
ER 25
ø 0.630-0.039ø 16-1190025000
ø 0.079-0.039ø 2-1190025020
ø 0.118-0.079ø 3-2190025030ø 0.157-0.118ø 4-3190025040
ø 0.197-0.157ø 5-4190025050
ø 0.236-0.197ø 6-5190025060
ø 0.276-0.197ø 7-6190025070
ø 0.315-0.276ø 8-7190025080
ø 0.354-0.315ø 9-8190025090
ø 0.394-0.354ø 10-9190025100
ø 0.433-0.394ø 11-10190025110
ø 0.472-0.433ø 12-11190025120
ø 0.512-0.472ø 13-12190025130
ø 0.551-0.512ø 14-13190025140
ø 0.591-0.551ø 15-14190025150
ø 0.630-0.591ø 16-15190025160
ER 32
ø 0.787-0.079ø 20-2190032000
ø 0.118-0.079ø 3-2190032030
ø 0.157-0.118ø 4-3190032040
ø 0.197-0.157ø 5-4190032050
ø 0.236-0.197ø 6-5190032060
ø 0.276-0.236ø 7-6190032070
ø 0.315-0.276ø 8-7190032080
ø 0.354-0.315ø 9-8190032090
ø 0.394-0.354ø 10-9190032100
ø 0.433-0.394ø 11-10190032110ø 0.472-0.433ø 12-11190032120
ø 0.512-0.472ø 13-12190032130
ø 0.551-0.512ø 14-13190032140
ø 0.591-0.551ø 15-14190032150
ø 0.630-0.591ø 16-15190032160
ø 0.669-0.630ø 17-16190032170
ø 0.709-0.669ø 18-17190032180
ø 0.748-0.709ø 19-18190032190
ø 0.787-0.748ø 20-19190032200
ER 40
ø 1.024-0.118ø 26-3190040000
ø 0.157-0.118ø 4-3190040040
ø 0.197-0.157ø 5-4190040050ø 0.236-0.197ø 6-5190040060
ø 0.276-0.197ø 7-6190040070
ø 0.315-0.276ø 8-7190040080
ø 0.354-0.315ø 9-8190040090
ø 0.394-0.354ø 10-9190040100
ø 0.433-0.394ø 11-10190040110
ø 0.472-0.433ø 12-11190040120
ø 0.512-0.472ø 13-12190040130
ø 0.551-0.512ø 14-13190040140
ø 0.591-0.551ø 15-14190040150
ø 0.630-0.591ø 16-15190040160
ø 0.669-0.630ø 17-16190040170
ø 0.709-0.669ø 18-17190040180
ø 0.748-0.709ø 19-18190040190ø 0.787-0.748ø 20-19190040200
ø 0.827-0.787ø 21-20190040210
ø 0.866-0.827ø 22-21190040220
ø 0.906-0.866ø 23-22190040230
ø 0.945-0.906ø 24-23190040240
ø 0.984-0.945ø 25-24190040250
ø 1.024-0.984ø 26-25190040260
ER 50
ø 1.339-0.394ø 34-10190050000
ø 0.236-0.157ø 6-4190050060ø 0.315-0.236ø 8-6190050080
ø 0.394-0.315ø 10-8190050100
ø 0,472-0,394ø 12-10190050120
ø 0,551-0,472ø 14-12190050140
ø 0,630-0,551ø 16-14190050160
ø 0,709-0,630ø 18-16190050180
ø 0,787-0,709ø 20-18190050200
ø 0,866-0,787ø 22-20190050220
ø 0,945-0,866ø 24-22190050240
ø 1,024-0,945ø 26-24190050260
ø 1.102-1.024ø 28-26190050280
ø 1.181-1.102ø 30-28190050300
ø 1.260-1.181ø 32-30190050320
ø 1.339-1.260ø 34-32190050340
11.01.08 © WTO GmbH * Subject to change without notice * www.wto.de
Sauter face mounted VDI 50, DIN 5480, left
Collets DIN 6499B (ER/ESX)
8/17/2019 Sauter Face Mounted VDI 50_DIN 5480_left_WTO_En
http://slidepdf.com/reader/full/sauter-face-mounted-vdi-50din-5480leftwtoen 24/25
ER 40
ø 4191040040
ø 5191040050
ø 6191040060 ø 7191040070
ø 8191040080
ø 9191040090
ø 10191040100
ø 11191040110
ø 12191040120
ø 13191040130
ø 14191040140
ø 15191040150
ø 16191040160
ø 17191040170
ø 18191040180
ø 19191040190
ø 20191040200ø 21191040210
ø 22191040220
ø 23191040230
ø 24191040240
ø 25191040250
ø 26191040260
ø 0.25191040025-in
ø 0.313191040031-in
ø 0.375191040038-in
ø 0.438191040044-in
ø 0.5191040050-in
ø 0.563191040056-in
ø 0.625191040063-in
ø 0.75191040075-inø 0.875191040088-in
ø 1191040100-in
11.01.08 © WTO GmbH * Subject to change without notice * www.wto.de
Sauter face mounted VDI 50, DIN 5480, left
Collets DIN 6499D (ER/ESX) - with sealant for IC
8/17/2019 Sauter Face Mounted VDI 50_DIN 5480_left_WTO_En
http://slidepdf.com/reader/full/sauter-face-mounted-vdi-50din-5480leftwtoen 25/25
Interchangeable millingarbor type 192
160022192 Ø 22
160027192 Ø 27
160032192 Ø 32160040192 Ø 40
160023192 Ø 7/8"
160025192 Ø 1"
160031192 Ø 11/4"
160038192 Ø 11/2"
Sauter face mounted VDI 50, DIN 5480, left
Interchangeable milling abors