SAR & HAC Instruments for Wireless • Consulting • Research ... · · Integral quarter-wave...

This specification is preliminary and may change without notice, E&OE ©APREL 2010.

Since 1981

17 Bentley Avenue Ottawa (Nepean) ON Canada K2E 6T7

[email protected]

of 1

Phone (613) 820-2730Fax (613) 820-4161

SAR & HAC Instruments for Wireless • Consulting • Research • Standards • Compliance • Training

APREL Antenna Chamber Calibration & Validation Dipoles

For use in CTIA and Anechoic Antenna Chambers


Since 1981


[email protected]

of 2

Phone (613) 820-2730Fax (613) 820-4161


Products – Antenna and Components Matched Dipole Antenna Sets Features · Standard, Magnetic and Sleeve Dipoles · Exceptional symmetry peak to null better than ±0.1dB · True Omni-directional radiation gain pattern · Integral quarter-wave choke to reduce cable interaction · SMA-Type (female) Connectors, 50ohms impedance Description

• The complete calibration antenna set consists of a horizontally polarized magnetic, vertically polarized sleeve and a standard half-wavelength resonant gain reference antennas.

• The magnetic and sleeve dipole antennas are designed to meet the Cellular Telecommunication and Internet Association’s (CTIA) ±0.1dB asymmetry requirement for ripple test measurements.

• Typical gain is between (1.2 and 2.1) dBi with Omni-directional radiation pattern approaching that of a half-wavelength resonant dipole.

• Superior performance is achieved using an integral quarter-wave choke design to reduce end-fed cable interactions.

• These resonant dipoles are designed to have a VSWR less than 1.2:1 at the intended center frequency.

Applications · CTIA’s Over-The-Air Performance Test Plan · Gain reference for antenna range calibration Ordering - When ordering use model numbers in the above specification table. Options and Accessories - Antenna Mounting Pedestal


Since 1981


[email protected]

of 3

Phone (613) 820-2730Fax (613) 820-4161



Since 1981


[email protected]

of 4

Phone (613) 820-2730Fax (613) 820-4161



Since 1981


[email protected]

of 5

Phone (613) 820-2730Fax (613) 820-4161


Products – Antenna and Components MDP-0836 Magnetic Dipole Antenna Features · Operating Centre Frequency 836.5MHz · Exceptional symmetry peak to null better than ±0.1dB · True Omni-directional radiation gain pattern · Integral quarter-wave choke reduces cable interaction Description

• The MDP-0836 magnetic dipole is designed as a reference antenna for range calibration, and meets the Cellular Telecommunication and Internet Association’s (CTIA) ±0.1dB asymmetry requirement for ripple test measurements.

• The antenna is Omni-directional with a radiation pattern that approaches that of a half-wave resonant dipole.


• The magnetic dipole is designed to operate with a VSWR less than 1.2:1 at the center frequency of 836.5MHz.

Applications · CTIA’s Over-The-Air Performance Test Plan · Reference for antenna range calibration Ordering - When ordering use model numbers in the specification table. Options and Accessories - Antenna Mounting Pedestal


Since 1981


[email protected]

of 6

Phone (613) 820-2730Fax (613) 820-4161



Since 1981


[email protected]

of 7

Phone (613) 820-2730Fax (613) 820-4161



Since 1981


[email protected]

of 8

Phone (613) 820-2730Fax (613) 820-4161



Since 1981


[email protected]

of 9

Phone (613) 820-2730Fax (613) 820-4161



Since 1981


[email protected]

of10

Phone (613) 820-2730Fax (613) 820-4161



Since 1981


[email protected]

of11

Phone (613) 820-2730Fax (613) 820-4161


Products – Antenna and Components MDP-1880 Magnetic Dipole Antenna Features · Operating Frequency 1880MHz · Exceptional symmetry peak to null better than ±0.1dB · True Omni-directional radiation gain pattern · Integral quarter-wave choke reduces cable interaction Description

• The MDP-1880 magnetic dipole is designed as a reference antenna for range calibration, and meets the Cellular Telecommunication and Internet Association’s (CTIA) ±0.1dB asymmetry requirement for ripple test measurements.



• The magnetic dipole is designed to operate with a VSWR less than 1.2:1 at the center frequency of 1880MHz.

Applications · CTIA’s Over-The-Air Performance Test Plan · Reference for antenna range calibration Ordering - When ordering use model numbers in the specification table. Options and Accessories - Antenna Mounting Pedestal


Since 1981


[email protected]

of12

Phone (613) 820-2730Fax (613) 820-4161



Since 1981


[email protected]

of13

Phone (613) 820-2730Fax (613) 820-4161



Since 1981


[email protected]

of14

Phone (613) 820-2730Fax (613) 820-4161



Since 1981


[email protected]

of15

Phone (613) 820-2730Fax (613) 820-4161



Since 1981


[email protected]

of16

Phone (613) 820-2730Fax (613) 820-4161



Since 1981


[email protected]

of17

Phone (613) 820-2730Fax (613) 820-4161


Products – Antenna and Components SDP-0836 Sleeve Dipole Antenna Features · Operating Frequency of 836.5MHz · Exceptional symmetry peak to null better than ±0.1dB · True omnidirectional radiation gain pattern · Integral quarter-wave choke reduces cable interaction Description

• The SDP-0836 magnetic dipole is designed as a reference antenna for range calibration, and meets the Cellular Telecommunication and Internet Association’s (CTIA) ±0.1dB asymmetry requirement for ripple test measurements.



• The sleeve dipole is designed to operate with a VSWR less than 1.2:1 at the center frequency of 836.5MHz.

Applications · CTIA’s Over-The-Air Performance Test Plan · Precision gain references for antenna range calibration Ordering - When ordering use model numbers in the above specification table. Options and Accessories - Antenna Mounting Pedestal


Since 1981


[email protected]

of18

Phone (613) 820-2730Fax (613) 820-4161



Since 1981


[email protected]

of19

Phone (613) 820-2730Fax (613) 820-4161



Since 1981


[email protected]

of20

Phone (613) 820-2730Fax (613) 820-4161



Since 1981


[email protected]

of21

Phone (613) 820-2730Fax (613) 820-4161



Since 1981


[email protected]

of22

Phone (613) 820-2730Fax (613) 820-4161


Products – Antenna and Components SDP-1880 Sleeve Dipole Antenna Features · Operating Frequency of 1880MHz · Exceptional symmetry peak to null better than ±0.1dB · True Omni-directional radiation gain pattern · Integral quarter-wave choke reduces cable interaction Description

• The SDP-1880 sleeve dipole is designed as a reference antenna for range calibration, and meets the Cellular Telecommunication and Internet Association’s (CTIA) ±0.1dB asymmetry requirement for ripple test measurements.



• The sleeve dipole is designed to operate with a VSWR less than 1.2:1 at the center frequency of 1880MHz.

Applications · CTIA’s Over-The-Air Performance Test Plan · Precision gain references for antenna range calibration Ordering - When ordering use model numbers in the above specification table. Options and Accessories - Antenna Mounting Pedestal


Since 1981


[email protected]

of23

Phone (613) 820-2730Fax (613) 820-4161



Since 1981


[email protected]

of24

Phone (613) 820-2730Fax (613) 820-4161



Since 1981


[email protected]

of25

Phone (613) 820-2730Fax (613) 820-4161



Since 1981


[email protected]

of26

Phone (613) 820-2730Fax (613) 820-4161



Since 1981


[email protected]

of27

Phone (613) 820-2730Fax (613) 820-4161


Products – Antenna and Components CDP-0836 Standard Dipole Antenna Features · Operating Frequency of 836.5MHz · True Omni-directional radiation gain pattern Description

• The CDP-0836 standard dipole is designed as a reference antenna for range calibration, and measurements.

• The antenna is a half-wave resonant dipole with typical gain of (2.15) dBi with an Omni-directional radiation pattern.

• The dipole is designed to operate at the center frequency with VSWR of less than 1.2:1, or VSWR of less than 1.4:1 in at least a ±20MHz band around the center frequency of 836.5MHz.

Applications · Test and Measurements · Gain reference for range calibration Ordering - When ordering use model numbers in the above specification table. Options and Accessories - Antenna Mounting Pedestal


Since 1981


[email protected]

of28

Phone (613) 820-2730Fax (613) 820-4161



Since 1981


[email protected]

of29

Phone (613) 820-2730Fax (613) 820-4161



Since 1981


[email protected]

of30

Phone (613) 820-2730Fax (613) 820-4161



Since 1981


[email protected]

of31

Phone (613) 820-2730Fax (613) 820-4161



Since 1981


[email protected]

of32

Phone (613) 820-2730Fax (613) 820-4161



Since 1981


[email protected]

of33

Phone (613) 820-2730Fax (613) 820-4161


Products – Antenna and Components CDP-1880 Standard Dipole Antenna Features · Operating Frequency of 1880MHz · True Omni-directional radiation gain pattern Description

• The CDP-1880 standard dipole is designed as a reference antenna for range calibration, and measurements.

• The antenna is a half-wave resonant dipole with typical gain of (2.15) dBi with an Omni-directional radiation pattern.

• The dipole is designed to operate at the center frequency with VSWR of less than 1.2:1, or VSWR of less than 1.4:1 in at least a 20MHz band around the center frequency of 1880MHz.

Applications · Test and Measurements · Gain reference for range calibration Ordering - When ordering use model numbers in the above specification table. Options and Accessories - Antenna Mounting Pedestal


Since 1981


[email protected]

of34

Phone (613) 820-2730Fax (613) 820-4161



Since 1981


[email protected]

of35

Phone (613) 820-2730Fax (613) 820-4161



Since 1981


[email protected]

of36

Phone (613) 820-2730Fax (613) 820-4161



Since 1981


[email protected]

of37

Phone (613) 820-2730Fax (613) 820-4161



Since 1981


[email protected]

of38

Phone (613) 820-2730Fax (613) 820-4161


For further details on the antennas discussed contact your local representative. Full calibration for both 2D and 3D applications is available on request.

SAR & HAC Instruments for Wireless • Consulting • Research ... · · Integral quarter-wave...

Documents

Transcript of SAR & HAC Instruments for Wireless • Consulting • Research ... · · Integral quarter-wave...