NEWS 2017.09 vol.86 (47fi) (29 (39 (39 *-LN-y : 3-39-1 TEL ...
SAPI di Dante Teruzzi St. G. Ratti, 84 20855 Lesmo (MI) tel. +39 039 6065116 fax. +39 039 6888887...
-
Upload
bennett-mills -
Category
Documents
-
view
224 -
download
0
Transcript of SAPI di Dante Teruzzi St. G. Ratti, 84 20855 Lesmo (MI) tel. +39 039 6065116 fax. +39 039 6888887...
SAPI di Dante Teruzzi St. G. Ratti, 84 20855 Lesmo (MI) tel. +39 039 6065116 fax. +39 039 6888887 email. [email protected] web. www.sapicombustione.com / www.sapicombustion.com
INNOVATIVE SOLUTIONS FOR
INDUSTRIAL COMBUSTION
Since 1983, SAPI is specialized in industrial combustion and provides innovative solutions by technical expertise backed up with years of experience in factory plants.For over twenty years SAPI has invested in research, testing and implementation of combustion equipment to be installed on machines for any industrial production cycles.
ABOUT US
The “know-how” acquired in ‘hands on’ facilities experience, led us to create systems combustion technology for all types of fuel (natural gas, LPG, gas poor, diesel, kerosene and fuel oil).SAPI provides a complete service and management for design, sizing and the realization of any combustion plant.
ABOUT US
Total surface: 2.500 sqm
Employees and workers: 40 people
Yearly income 15 Mln Euro
OUR FACTORY
Burners type proposed are applicable in many production systems and in different sectors such as: STEEL MAKING; HEAT TREATMENTS; KILNS; DRY-OUT.
APPLICATION INDUSTRIES
STEEL MAKING
Combustion plant for: Roller furnace for screws and
nuts, steel plate sheet. Intermittent furnace for
thermal treatment and forging.
Aluminium, steel, lead and cast furnace.
Post combustion.
Forging / reheating chamber furnace
Process scope : Forging / heating material
for extrusion and printing Products:
fittings, bearings, etc. for nuclear and petrochemical industries.
Chamber specificatiions: width : 3 mt height : 2.5 mt depth : 5 mt
Production: 10 t/hr
Fuel: Natural gas Working temperature:
1200/1250°C
HEAT TREATMENTS
Combustion plant for: Furnace thermal treatment for
steel and stainless Furnace thermal treatment for
glass and porcelain
Carriage furnace for thermal treatment
Process scope : Thermal treatment for
material distension Products:
fittings for petrochemical industry.
Chamber specifications: width : 4 mt height : 4 mt depth : 10 mt
Fuel: Natural gas Working temperature:
600 to 1200°C The furnace is controlled
by PLC which manages 32 zones
KILNS
The oven is constructed by metallic carpentry, the inside is constructed with refractory material / ceramic fiber, enabling it to reach temperatures which can heat or melt various types of metal and materials.Typically the only metal that is melted is aluminum, while in all other cases (steel, cast iron, aluminum alloys, copper alloys) the oven is used to perform the warm forging, extrusion or heat treatments.
Forging / reheating chamber furnace
Process scope : Forging / heating
material for extrusion and printing
Products: fittings for
petrochemical industry. Chamber specificatiions:
width : 2 mt height : 1,5 mt depth : 3 mt
Production: 5 t/hr Fuel: Natural gas Working temperature:
1200/1250°C
DRY-OUT
Furnace Dry-out is intended like
to remove from refractory material all the residual water.
The hot air generators are ideal for a dry-out because they can ensure that all parts of the refractory are heated in the same way.
Potentiality: 340 Kw 450 Kw 1500 Kw
Dry-out hot air generator Process scope:
Refractory concrete dry-out
Fuel: Lpg
Chambre specificatiions: diameter : 5 mt depth : 2 mt
Working temperature: 0°C to 150°C in 12 hours persistence at 150°C for
24 hours 150°C to 250°C in 12
hours persistence at 250°C for
15 hours 250°C to 0 °C in 5 hours
REFRACTORY BURNERS (medium/high speed, monoblock, radiant tubes) AIR/AIR EXCHANGERS DRY-OUT
PRODUCTS
CERTIFICATIONS
THANK YOU!