SAP HANA Studio Installation Update Guide En

PUBLIC

SAP HANA Platform SPS 07Document Version: 1.0 - 27-11-2013

SAP HANA Database - Studio Installation and Update Guide

Table of Contents

1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.1 About the SAP HANA Studio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

1.2 Supported Platforms. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.3 Software Download. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.4 SAP HANA Guides. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2 Planning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

2.1 System Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

2.2 Installation Paths. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

3 Installation or Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

3.1 Installation or Update on Linux. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

3.1.1 Using the Installation Manager on Linux. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

3.1.2 Using the Command Line on Linux. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

3.2 Installation or Update on Microsoft Windows. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

3.2.1 Using the Installation Manager on Windows. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

3.2.2 Using the Command Line on Windows. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

3.3 Updating the SAP HANA Studio Using an Update Site. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

3.4 Installation and Update Commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

3.5 Call Options for an Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

4 Additional Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

4.1 Logging the Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

4.1.1 Logging the Installation on Linux. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

4.1.2 Logging the Installation on Windows. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

4.2 Starting the SAP HANA Studio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

4.2.1 Starting the SAP HANA Studio on Windows. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

4.2.2 Starting the SAP HANA Studio on Linux. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

4.3 Uninstalling the SAP HANA Studio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

4.3.1 Uninstalling the SAP HANA Studio on Linux. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

4.3.2 Uninstalling the SAP HANA Studio on Windows. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

4.4 Manually Setting Up the Update Site for an SAP HANA Studio Update. . . . . . . . . . . . . . . . . . . . . . . . . 21

4.5 Installing or Updating the Repository. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

4.5.1 Installing or Updating the Repository on Linux. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

4.5.2 Installing or Updating the Repository on Windows. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

2P U B L I C© 2013 SAP AG or an SAP affiliate company. All rights reserved.

SAP HANA Database - Studio Installation and Update GuideTable of Contents

1 Introduction

1.1 About the SAP HANA Studio

The SAP HANA studio is a collection of applications for the SAP HANA appliance software. It enables technical users to manage the SAP HANA database, to create and manage user authorizations, and to create new or modify existing models of data in the SAP HANA database. It is a client tool, which can be used to access local or remote SAP HANA databases.

The SAP HANA studio runs on the Eclipse platform 3.6.

For more information about SAP HANA, see the SAP HANA Master Guide.

1.2 Supported Platforms

You can use the SAP HANA studio on the following platforms:

● Microsoft Windows x32 and x64 versions of:

○ Windows XP○ Windows Vista○ Windows 7

● SUSE Linux Enterprise Server SLES 11: x86 64-bit version

1.3 Software Download

In the SAP Software Download Center, you have access to the installation media and components for SAP HANA.

You can find the installation media and components for SAP HANA in the following locations:

● Installation media for an SAP HANA SPS:SAP Software Download Center Installations and Upgrades A-Z Index Installations and Upgrades - H

SAP In-Memory (SAP HANA) HANA Platform Edition SAP HANA PLATFORM EDITION SAP HANA PLATFORM EDIT. 1.0 Installation

● Support Packages and Patches for SAP HANA:SAP Software Download Center Support Packages and Patches A-Z Index Installations and Upgrades

- H SAP HANA PLATFORM EDITION SAP HANA PLATFORM EDIT. 1.0

The responsibility for acquiring and installing SAP HANA depends on the chosen deployment model:

● If a customer chooses the SAP HANA tailored data center integration, the components of SAP HANA have to be installed on validated hardware by a certified administrator.

● If a customer chooses an SAP HANA appliance, the components of SAP HANA can only be installed by certified hardware partners on validated hardware running a specific operating system. Any other system or

SAP HANA Database - Studio Installation and Update GuideIntroduction

P U B L I C© 2013 SAP AG or an SAP affiliate company. All rights reserved. 3

http://help.sap.com/hana/SAP_HANA_Master_Guide_en.pdf

content developed with systems of this type is not supported by SAP. For more information, see the information page of the product version. Support Package Stacks (SPS) can be downloaded and applied to appliances in accordance with agreements with the respective hardware partner.

Related Information

SAP Software Download Center

1.4 SAP HANA Guides

Documentation for the current Support Package Stack of the SAP HANA Platform Edition can be found on the SAP Help Portal. SAP HANA documentation for previous Support Package Stacks can be found on the SAP HANA Knowledge Center on SAP Service Marketplace.

For information about SAP HANA landscape, security, installation, and administration, see the resources listed below:

Topic Location Quick Link

SAP HANA landscape, deployment, and installation

SAP HANA Knowledge Center on the SAP Help Portal

http://help.sap.com/hana_platform:

● SAP HANA Master Guide● SAP HANA Server Installation Guide● SAP HANA Master Update Guide● SAP HANA Update and

Configuration Guide

SAP HANA administration and security

SAP HANA Knowledge Center on the SAP Help Portal

http://help.sap.com/hana_platform:

● SAP HANA Technical Operations Manual

● SAP HANA Administration Guide● SAP HANA Security Guide

SAP HANA documentation for previous Support Package Stacks

SAP HANA Knowledge Center on SAP Service Marketplace

https://service.sap.com/hana


SAP HANA Database - Studio Installation and Update GuideIntroduction

http://help.sap.com/disclaimer?site=https://service.sap.com/swdc

http://help.sap.com/hana_platform

http://help.sap.com/hana/SAP_HANA_Master_Guide_en.pdf

http://help.sap.com/hana/SAP_HANA_Server_Installation_Guide_en.pdf

http://help.sap.com/hana/SAP_HANA_Master_Update_Guide_en.pdf

http://help.sap.com/hana/SAP_HANA_Update_and_Configuration_Guide_en.pdf


http://help.sap.com/hana_platform

http://help.sap.com/hana/SAP_HANA_Technical_Operations_Manual_en.pdf

http://help.sap.com/hana/SAP_HANA_Technical_Operations_Manual_en.pdf

http://help.sap.com/hana/SAP_HANA_Administration_Guide_en.pdf

http://help.sap.com/hana/SAP_HANA_Security_Guide_en.pdf

https://service.sap.com/hana

2 Planning

2.1 System Requirements

Java JRE 1.6 or 1.7 must be installed to run the SAP HANA studio.

The Java runtime must be accessible for the user that runs the studio via the PATH variable.

Make sure that you choose the correct Java variant for your installation of the SAP HANA studio:

● For a 32-bit installation, choose a 32-bit Java variant.● For a 64-bit installation, choose a 64-bit Java variant.

NoteThere is no 32-bit version of the repository client. If you install the 32-bit version of the SAP HANA studio and want to make use of the repository integration features, for example, in the Project Explorer view in the SAP HANA Development perspective, you must install the 64-bit version of the repository client.

NoteThe SAP HANA studio uses the default Eclipse secure storage to store passwords, for example, of database users connecting to SAP HANA systems. However, depending on whether you are running a 32-bit installation or a 64-bit installation, different password providers are used. This means that switching between a 32-bit and a 64-bit installation results in the clearing of stored passwords. It is possible to override the default Eclipse configuration for password storage using the command line arguments -eclipse.keyring and -eclipse.password. For more information see the Eclipse documentation.

Related Information

Eclipse Documentation

2.2 Installation Paths

SyntaxIf you do not specify an installation path during installation, the following default values apply:

SAP HANA Database - Studio Installation and Update GuidePlanning


http://help.sap.com/disclaimer?site=http://help.eclipse.org/

Platform Package

Version

Installation Path

Microsoft Windows x86, 32-bit

32-bit C:\Program Files\sap\hdbstudio


64-bit C:\Program Files\sap\hdbstudio


32-bit C:\Program Files (x86)\sap\hdbstudio

Linux x86, 64-bit 64-bit /usr/sap/hdbstudio


SAP HANA Database - Studio Installation and Update GuidePlanning

3 Installation or Update ● Installation

You can install the SAP HANA studio with one of the following methods:

○ Use the GUI-based Installation Manager, which is based on the program hdbsetup.This is the recommended installation method.

○ Use the hdbinst program at the command line.● Update

You can update the SAP HANA Studio with one of the following methods:

○ Use the SAP HANA lifecycle manager (HLM) to set up the update server for the SAP HANA studio update and regularly provide the newest installation files. Whenever you perform an automated update, the installation files for the SAP HANA studio update are stored and updated inside the SAP HANA database in a delivery unit with a package that contains the installation files.This is the recommend update method.

○ Manually set up the repository for the update site using the hdbinst program on any server with the call option --copy_repository=<target_repository_path>, then manually configure it to be available to the SAP HANA studio installations.This is suitable for large landscapes with multiple SAP HANA studios where the update needs to be centrally available. There is no dependency on the SAP HANA lifecycle manager.

○ Download the latest version of SAP HANA studio from SAP Service Marketplace, and use the GUI-based Installation Manager, which is based on the program hdbsetup.This is suitable for quick updates of individual SAP HANA studios where there is no infrastructure.

○ Download the latest version of SAP HANA studio from SAP Service Marketplace, and use the hdbinst program at the command line.This is suitable for quick updates of individual SAP HANA studios where there is no infrastructure.

○ See SAP Note 1828400 SAPUI5 tools disappeared after updating HANA Studio.

NoteUntil SAP HANA SPS 06 the installation of the SAP HANA studio was performed as administrator (Windows) or root user (Linux).

As of SAP HANA SPS 07 the installation of the SAP HANA studio can also be performed without administration rights or being a root user. When installing the SAP HANA studio without administrative rights the installed SAP HANA studio is only available to the user who installed it. The default installation folder for MS Windows is %USERPROFILE%\sap\hdbstudio and for Linux is $HOME/sap/hdbstudio.

NoteWhen you start the SAP HANA studio, you can pass standard Eclipse command line arguments. You can specify the workspace you are using with the -data <path to workspace> command line argument. You can install and use more than one SAP HANA studio installation with different workspaces on one computer with the -data command line argument.

These are examples for two SAP HANA studio installations with different workspaces on one Microsoft Windows machine (the backslash \ is only used for Microsoft Windows):

C:\Program Files\sap\hdbstudio1\hdbstudio.exe -data "c:\shared\hdbstudio1"C:\Program Files\sap\hdbstudio2\hdbstudio.exe -data "c:\shared\hdbstudio2"

SAP HANA Database - Studio Installation and Update GuideInstallation or Update


http://help.sap.com/disclaimer?site=https://service.sap.com/sap/support/notes/1828400

For more information, see the Eclipse standard documentation (search for "Eclipse runtime options").

3.1 Installation or Update on Linux

3.1.1 Using the Installation Manager on Linux

Prerequisites

● GTK2 is installed so that you can run the graphical installation tool (this is contained in SLES11).● You are logged on as the root user.● This user is authorized to open a display.● The Java runtime is accessible either via the PATH or JAVA_HOME variable or by specifying the --vm option.● You need a local X11 graphical environment and an X server on the machine where you perform the

installation.

Procedure

1. Download and extract the software to an empty directory.2. Open a root shell and go to the directory where you unpacked the software.

3. Call the Installation Manager as follows:./hdbsetup

NoteIf you have several installation kits - that is, several installation variants - on your system, navigate to the download directory, and enter the following command instead to start the Installation Manager:

./hdbsetup -a studio4. Choose the activity to be performed.5. Follow the instructions displayed by the Installation Manager.6. Leave the root shell after the installation or update has completed.

Results

The SAP HANA studio is installed or updated.



Related Information

Starting the SAP HANA Studio on Linux [page 18]

3.1.2 Using the Command Line on Linux

Prerequisites

● You are logged on as the root user.● The Java runtime is accessible either via the PATH or JAVA_HOME variable or by specifying the --vm option.

Procedure

1. Download and extract the software to an empty directory.2. Open a root shell and go to the directory where you unpacked the software.

3. Call the installation program as follows:hdbinst [<option_list>]

4. Follow the instructions displayed by the installation tool.5. Leave the root shell after the installation or update has completed.

Results


Related Information

Starting the SAP HANA Studio on Linux [page 18]Call Options for an Installation [page 13]

3.2 Installation or Update on Microsoft Windows

If the SAP HANA Studio is installed into the default directory on a Windows 7 operating system, write access to the files is prevented if you are not running the studio as the Windows administrator. We therefore recommend



that - if you do not have Windows administrator rights - you install the SAP HANA Studio in an alternative location, such as below the user's home folder or somewhere else on disk.

3.2.1 Using the Installation Manager on Windows

Prerequisites

● The Java runtime is accessible either via the PATH or JAVA_HOME variable or by specifying the --vm option.● You are logged on as a local administrator.

Procedure

1. Download and extract the software to an empty directory.2. In the Windows Explorer, go to the directory where you unpacked the software and double-click hdbsetup to

start the Installation Manager.

NoteIf you have several installation kits - that is, several installation variants - on your system, open a command prompt, navigate to the download directory, and enter the following command instead to start the Installation Manager:

hdbsetup -a studio3. Choose the activity to be performed and follow the instructions displayed by the Installation Manager.

Results


Related Information

Starting the SAP HANA Studio on Windows [page 17]



3.2.2 Using the Command Line on Windows

Prerequisites

● The Java runtime is accessible either via the PATH or JAVA_HOME variable or by specifying the --vm option.● You are logged on as a local administrator.

Procedure

1. Download and extract the software to an empty directory.2. Open a command prompt and go to the directory where you unpacked the software.3. Call the installation program as follows:

hdbinst [<option_list>] 4. Follow the instructions displayed by the installation tool.

Results


Related Information

Starting the SAP HANA Studio on Windows [page 17]Call Options for an Installation [page 13]

3.3 Updating the SAP HANA Studio Using an Update Site

Prerequisites

Before you can manually update the SAP HANA studio and configure the SAP HANA studio to check automatically for updates, you must have configured the update site from which updates are downloaded. You use the SAP HANA XS Web server to provide the installation files for the SAP HANA studio update. The installation files are packed in a delivery unit and imported into a package in the SAP HANA database when you perform an automated update with the SAP HANA lifecycle manager.

You can also use an SAP HANA repository located in the file system as the update site. For more information, see Installing or Updating the Repository on Linux [page 22] or Installing or Updating the Repository on Windows [page 23].



Procedure

1. In the SAP HANA studio, specify the update site as follows:

a) From the main menu, choose Window Preferences Install/Update Available Software Sites .b) Choose Add... and specify the name of the update repository (optional) and its location, for example,

http://<host>:80<instance_number>/sap/hana/studio/ if you are using the SAP HANA XS Web server or file:/<target_repository_path> if you are using a file system location.

2. To update the SAP HANA studio manually, proceed as follows:

a) From the main menu, choose Help Check for Updates .The SAP HANA studio checks the specified software site for an update.

b) If an update is available, follow the on-screen instructions to install the update.

Note

The update can also be performed using the Eclipse standard function Help Install New Software... If you use this function, you enter the update site for the studio update just for the current session.

3. To configure the SAP HANA studio to check for updates automatically and notify you of their availability, proceed as follows:

a) From the main menu, choose Window Preferences Install/Update Automatic Updates .b) Specify your update settings.You are automatically notified if an update is available in accordance with your settings.

NoteBy default, the SAP HANA studio does not automatically check for updates and notify you.

3.4 Installation and Update Commands

Operating System Installation Manager (Graphical User Interface)

Installation in the Command Line

Microsoft Windows hdbsetup [-a studio] hdbinst [-a studio] [<option_list>]

<option_list> :: = <option> <option> ...

For the available options, see Call Options for an Installation [page 13].

You can omit the call option -a studio if you only have one



Operating System Installation Manager (Graphical User Interface)

Installation in the Command Line

installation kit - that is, one installation variant - on your system.

Linux ./hdbsetup [-a studio] ./hdbinst [-a studio] [<option_list>]

<option_list> :: = <option> <option> ...

For the available options, see Call Options for an Installation [page 13].

You can omit the call option -a studio if you only have one installation kit - that is, one installation variant - on your system.

3.5 Call Options for an Installation

Option - Long Option - Short Description

--archive_dir=<dir> -a Installation variant - specifies the directory containing the installation kit. For the studio installation, specify -a studio.

NoteYou can omit this call option if you only have one installation kit - that is, one installation variant - on your system. This is generally the case when you are installing from the DVD or from SAP Service Marketplace.

--batch -b Runs the program in batch mode using default values for any relevant call options that are not specified




--check_files Checks whether components of the installation kit are already installed on this host

--configfile=<file_name> Specifies a configuration file for using a preconfigured setup

The file must be in regular ini file format.

The specified name is interpreted by the installation program as relative to the installation directory.

If the installation kit is located on a read-only file system (for example, a DVD), specify the absolute path to the configuration file.

--copy_repository=<target_repository_path> Specifies the target to which the repository should be copied

--help -h Displays the list of installation options

--list_packages -l Displays available software components and their versions

--list_systems Displays a list of the installed in-memory systems, clients, and studio on the host

--path=<path> Specifies the installation path

--repository=<source_repository_url> -r Defines the source from which the repository should be copied

If you do not specify this option, the repository contained in the installation kit is copied.




--version -v Displays the version of the installation program

--vm=<java_vm> Specifies the path of the Java runtime file



4 Additional Information

4.1 Logging the Installation

4.1.1 Logging the Installation on Linux

The installation process is logged by the system.

There are two log files written during installation:

● *.log: can be read using a text editor● *.msg: XML format for the display in the installation tool with the GUI

The log files are stored at the following path: /var/tmp/hdb_studio_<time_stamp>

4.1.2 Logging the Installation on Windows

The installation process is logged by the system.

There are two log files written during installation:

● *.log: can be read using a text editor● *.msg: XML format for the display in the installation tool with the GUI

The log files are stored at the following path:

%TEMP%\hdb_studio_<time_stamp>

4.2 Starting the SAP HANA Studio

After the software and (optionally) the repository have been installed, you can start the SAP HANA studio.

NoteWhen you start the SAP HANA studio, you can pass standard Eclipse command line arguments. You can specify the workspace you are using with the -data <path to workspace> command line argument. You can install and use more than one SAP HANA studio installation with different workspaces on one computer with the -data command line argument.

These are examples for two SAP HANA studio installations with different workspaces on one Microsoft Windows machine (the backslash \ is only used for Microsoft Windows):

C:\Program Files\sap\hdbstudio1\hdbstudio.exe -data "c:\shared\hdbstudio1"C:\Program Files\sap\hdbstudio2\hdbstudio.exe -data "c:\shared\hdbstudio2"

For more information, see the Eclipse standard documentation (search for "Eclipse runtime options").


SAP HANA Database - Studio Installation and Update GuideAdditional Information

4.2.1 Starting the SAP HANA Studio on Windows

Prerequisites

Before starting the SAP HANA studio, check the following:

● Ensure that the Java runtime is set in the system PATH variable.● To make use of the repository integration features in the SAP HANA studio, ensure that the SAP HANA

(repository) client is installed.

NoteThere is no 32-bit version of the repository client. If you install the 32-bit version of the SAP HANA studio and want to make use of the repository integration features, for example, in the Project Explorer view in the SAP HANA Development perspective, you must install the 64-bit version of the repository client.

Procedure

1. In the Windows Start menu, choose All Programs SAP HANA SAP HANA Studio .The SAP HANA studio starts.

NoteThe SAP HANA studio uses the default Eclipse secure storage to store passwords, for example, of database users connecting to SAP HANA systems. However, depending on whether you are running a 32-bit installation or a 64-bit installation, different password providers are used. This means that when you start the SAP HANA studio after having switched between a 32-bit and a 64-bit installation, any stored passwords will be cleared. It is possible to override the default Eclipse configuration for password storage using the command line arguments -eclipse.keyring and -eclipse.password. For more information see the Eclipse documentation.

2. Enable access to the SAP HANA repository.To make use of the repository integration features in the SAP HANA studio, for example, in the Project Explorer view in the SAP HANA Development perspective, you must set the path to the repository client, as follows:

a) In the SAP HANA studio, choose Window Preferences SAP HANA Development Repository Access .

b) Choose Browse... to enter the path to the SAP HANA client executable, regi.exe.For example, C:\Program Files\sap\hdbclient\regi.exe

c) Choose Apply to enable the new setting.d) Choose OK to save the settings.



Related Information

Eclipse Documentation

4.2.2 Starting the SAP HANA Studio on Linux

Prerequisites

Before starting the SAP HANA studio, check the following:

● Ensure that the Java runtime is set in the system PATH variable.● To make use of the repository integration features in the SAP HANA studio, ensure that the SAP HANA

(repository) client is installed.

NoteThere is no 32bit version of the repository client. If you install the 32bit version of the SAP HANA studio and want to make use of the repository integration features, for example, in the Project Explorer view in the SAP HANA Development perspective, you must install the 64bit version of the repository client.

Context

To start the SAP HANA studio, perform the following steps:

Procedure

1. Open a shell and go to the installation directory, such as the following:/usr/sap/hdbstudio

2. Execute the following command:./hdbstudioThe SAP HANA studio starts.

3. Enable access to the SAP HANA repository.To make use of the repository integration features in the SAP HANA studio, for example, in the Project Explorer view in the SAP HANA Development perspective, you must set the path to the repository client, as follows:

a) In SAP HANA studio, choose Window Preferences SAP HANA Development Repository Access .

b) Choose Browse... to enter the path to the SAP HANA client executable, regi.For example, /usr/sap/hdbclient



http://help.sap.com/disclaimer?site=http://help.eclipse.org/

c) Choose Apply to enable the new setting.d) Choose OK to save the settings.

4.3 Uninstalling the SAP HANA Studio

Each installation has its own uninstallation tool. Use the hdbuninst program of the software package for which you want to uninstall the studio software.

4.3.1 Uninstalling the SAP HANA Studio on Linux

4.3.1.1 Uninstalling the SAP HANA Studio on Linux in Interactive Mode

Prerequisites

● You are logged on to the host where the SAP HANA studio software is installed.● You are logged on as the root user.

Procedure

1. Open a root shell and go to the directory where you unpacked the SAP HANA studio software that was used for this installation.

2. Enter the following command:./hdbuninstA list of installation IDs is displayed.

3. Enter the installation ID of the SAP HANA studio software and press Enter.

Results

The studio software is removed from this host.



4.3.1.2 Uninstalling the SAP HANA Studio on Linux in Batch Mode

Prerequisites

● You are logged on to the host where the SAP HANA studio software is installed.● You are logged on as the root user.

Context

To call the hdbuninst program in batch mode, specify the installation path of the SAP HANA studio software using the –-path option.

If you omit the installation path, the program does not run in batch mode but instead queries the installation ID.

Procedure

1. Open a root shell and go to the directory where you unpacked the software that was used for this installation.

2. Enter the following command:./hdbuninst -–path <installation_path> -b

4.3.2 Uninstalling the SAP HANA Studio on Windows

4.3.2.1 Uninstalling the SAP HANA Studio on Windows from the Control Panel

Prerequisites

You are logged on as a local administrator.

Procedure

1. Choose the following from the Start menu:

Start Control Panel Uninstall a Program .2. Navigate to the SAP HANA studio and choose Uninstall.



Results


4.3.2.2 Uninstalling the SAP HANA Studio on Windows from the Command Line

Prerequisites


Procedure

1. Open a command prompt and go to the directory where you unpacked the software that was used for this installation.

2. Enter the following command:hdbuninstA list of installation IDs is displayed.

3. Enter the installation ID of the studio software and press Enter.

Results


4.4 Manually Setting Up the Update Site for an SAP HANA Studio Update

We recommend that you use the SAP HANA lifecycle manager to set up the update server for the SAP HANA studio update and regularly provide the newest installation files. For more information, see "Performing an Automated Update" in the .SAP HANA Update and Configuration Guide.

If necessary, you can manually set up the update site for an SAP HANA studio update. This method uses the SAP HANA XS Web server as the update server. This method creates a delivery unit with a package that contains the installation files for the SAP HANA studio update.

You perform this setup as <sid>adm on the SAP HANA system.




1. Create the directory where you want to store the file with the delivery unit. Call the command as follows:mkdir /<PATH_TO_STORE_PACKED_DU>In this example, the directory is created inside the directory structure that is recommended for SAP HANA systems:mkdir /hana/shared/ABC/hdbstudio_delivery_unit

2. Create a delivery unit with a package that contains the installation files for the SAP HANA studio update. The delivery unit is stored in a.tgz file. Call the command as follows:hdbeuspack -e /<PATH_TO_STORE_PACKED_DU> -a <DU_Name> <PACKAGE_PREFIX> <CONTENT_DIRECTORY>In this example, the command creates the file HANA_STUDIO.tgz in the directory /hana/shared/ABC/hdbstudio_delivery_unit:hdbeuspack -e /hana/shared/ABC/hdbstudio_delivery_unit -a HANA_STUDIO sap.hana.studio /tmp/downloads/hdbstudio/studio/repository

3. Import the delivery unit, which is stored in the .tgz file, into the SAP HANA repository. Call the command as follows:hdbupdrep -s <sid> --delivery_unit=/<PATH_TO_STORE_PACKED_DU>In this example, the command imports the delivery unit HANA_STUDIO into the package sap/hana/studio of the SAP HANA database (<sid>=ABC):/usr/sap/ABC/SYS/global/hdb/install/bin/hdbupdrep -s ABC --delivery_unit=/hana/shared/ABC/hdbstudio_delivery_unit/HANA_STUDIO.tgz

NoteRepeat this procedure whenever necessary.

4.5 Installing or Updating the Repository

4.5.1 Installing or Updating the Repository on Linux

Prerequisites

You are logged on as a root user.

Procedure

1. Open a root shell and go to the directory where you unpacked the software for this installation.

2. Call the installation program as follows:./hdbinst -a studio --copy_repository=<target_repository_path>

3. Leave the root shell after the copy is completed.



Results

The repository is copied to the specified path.

Next Steps

You can use the repository that was just created to update the SAP HANA studio using an update site. Enter the path to the repository as the update site.

Related Information

Updating the SAP HANA Studio Using an Update Site [page 11]

4.5.2 Installing or Updating the Repository on Windows

Prerequisites


Procedure

1. Open a command prompt and go to the directory where you unpacked the software for this installation.2. Call the installation program as follows:

hdbinst -a studio --copy_repository=<target_repository_path> 3. Follow the instructions displayed by the installation tool.4. Leave the command prompt after the copy is completed.

Results

The repository is copied to the specified path.



Next Steps

You can use the repository that was just created to update the SAP HANA studio using an update site. Enter the path to the repository as the update site.

Related Information

Updating the SAP HANA Studio Using an Update Site [page 11]



www.sap.com/contactsap

© 2013 SAP AG or an SAP affiliate company. All rights reserved.No part of this publication may be reproduced or transmitted in any form or for any purpose without the express permission of SAP AG. The information contained herein may be changed without prior notice.Some software products marketed by SAP AG and its distributors contain proprietary software components of other software vendors. National product specifications may vary.These materials are provided by SAP AG and its affiliated companies ("SAP Group") for informational purposes only, without representation or warranty of any kind, and SAP Group shall not be liable for errors or omissions with respect to the materials. The only warranties for SAP Group products and services are those that are set forth in the express warranty statements accompanying such products and services, if any. Nothing herein should be construed as constituting an additional warranty.SAP and other SAP products and services mentioned herein as well as their respective logos are trademarks or registered trademarks of SAP AG in Germany and other countries.Please see http://www.sap.com/corporate-en/legal/copyright/index.epx for additional trademark information and notices.

http://www.sap.com/contactsap

http://www.sap.com/corporate-en/legal/copyright/index.epx

http://www.sap.com/corporate-en/legal/copyright/index.epx

SAP HANA Studio Installation Update Guide En

Documents

Transcript of SAP HANA Studio Installation Update Guide En