SAP FI-AA (Asset Accounting)

148

Click here to load reader

description

Overall Concept through asset accounting and configuration step also. easy to understand

Transcript of SAP FI-AA (Asset Accounting)

Page 1: SAP FI-AA (Asset Accounting)

1Copyright © 2008 Astrums All rights reserved. Astrums, its logo, and Experience the Excellence are trademarks of Astrums.

Day 1

SAP Financial Accounting (FI) Boot camp

vvSTRUMS

Page 2: SAP FI-AA (Asset Accounting)

Agenda – Day 4

2

• Asset Accounting – Key Concepts & Organisation Structure

• Asset Accounting – Master Data• Asset Accounting – Business Transactions• Asset Accounting – Period End Closing & Reporting• New GL Online Document Splitting

Page 3: SAP FI-AA (Asset Accounting)

Agenda – Day 1

3

• Asset Accounting – Key Concepts & Organisation Structure

• Asset Accounting – Master Data• Asset Accounting – Business Transactions• Asset Accounting – Period End Closing & Reporting• New GL Online Document Splitting

Page 4: SAP FI-AA (Asset Accounting)

FI Asset Accounting

: FI-AA provides for the accounting of fixed assets: As a sub module of the FI Financials module, FI-AA

provides a subsidiary ledger containing detailed asset transactions to the general ledger

: FI-AA is integrated with other SAP modules: : From MM Purchasing, goods receipts and invoice verification

transactions post to assets: From CO Overhead, orders collect costs and settle them to

assets: From PS Project System, WBS elements collect costs and

settle them to assets: FI-AA in turn posts back to FI general ledger and CO

Controlling via depreciation postings, acquisitions, transfers, and retirements

4

Page 5: SAP FI-AA (Asset Accounting)

FI Asset Accounting (cont.)

: Key Concepts

: Asset Accounting facilitates Parallel accounting

: This feature enables organisations to account and report based on various accounting standards

: It also supports Segment Reporting, which is a key requirement for various organisations.

5

Page 6: SAP FI-AA (Asset Accounting)

Key Definition: Fixed Asset

: Fixed assets – Tangible property used in the operation of a business: Land, buildings, leased real property and improvements: Equipment, including computers, plant, labs, office, and

hardware: Software purchases or development: Construction in process (assets under construction)

: Contrast to other types of assets:: Cash and equivalents (including receivables): Investments (handled in Treasury/Investment Management): Prepaid expenses, allowances: Leases: Raw materials, supplies, or inventory

6

Page 7: SAP FI-AA (Asset Accounting)

Key Definition: Transactions

: Financial transactions posted to assets (other than depreciation) fall into three general categories:: An asset acquisition (or capitalization) occurs when a

company buys or produces a fixed asset: Goods receipt through purchasing: Invoice receipt through purchasing: Invoice receipt through accounts payable: Settlement of an order or project: Transfer from another asset: Results in an acquisition posting to the balance sheet

: Transfers move costs between assets. An example is completing an asset under construction and transferring the capitalized costs to a new, depreciating asset.

: Retirements remove costs from and deactivate assets, such as disposing or selling an asset

7

Page 8: SAP FI-AA (Asset Accounting)

Key Definition: Depreciation

: Depreciation is a specific accounting treatment: Assets are depreciated to expense to recognize their

reducing value from year to year

: Depreciation is calculated by FI-AA and is controlled by a number of organisational and configuration elements

: Depreciation is posted as an expense and posted to a contra-account offsetting the acquisition value of assets

: Accounting rules allow different methods of depreciation: Straight-line, accelerated, tax, double-declining, etc., allowing companies different “books” for tax and financial reporting purposes

8

Page 9: SAP FI-AA (Asset Accounting)

Asset Accounting – Organization Structure

: Organization Structure

: Client

: Chart of Accounts

: Chart of Depreciation

: Company Code(s)

: Asset Class(es)

: Depreciation Area(s)

: Asset Masters

9

F I Asse t A cco u nting O rg aniza tio n al S tru c tu res

A sse ts

C o m pa n y C o deA E R O

A sse t C la sses(m u lt ip le )

D e p rec ia tio n A re as0 1 B o ok

C h a rt o f D e p re cia tionA E R O

C h a rt o f A ccou n tsA C O A

C lie n t 3 00

Page 10: SAP FI-AA (Asset Accounting)

Organization Structure – Chart of Depreciation

: Chart of Depreciation (COD) is the highest level of organisation in Asset Accounting.

: Chart of Depreciation is usually country specific; it satisfies the various business and legal requirements for valuation and depreciation of assets.

: Chart of Depreciation is a directory of depreciation areas, with each depreciation area meant to calculate values for assets for a specific need like book depreciation, tax depreciation, etc.

: One Chart of Deprecation can be assigned to more than one company code. One company code can, however, be assigned to only one chart of depreciation.

10

Page 11: SAP FI-AA (Asset Accounting)

Organisation Structure – Chart of Depreciation – Example

: SAP provides a standard Chart of Depreciation per country. It can be copied and customized, as necessary

: Standard Charts of Depreciation for various countries that are provided by SAP include Germany (0DE), USA (0US), Australia (0AU) and New Zealand (0NZ) among others

11

Page 12: SAP FI-AA (Asset Accounting)

Organisation Structure – Depreciation Areas (1 of 7)

:Depreciation areas are set up to accommodate calculation of parallel values of depreciation for different purposes:: Separate depreciation areas can be set up for

the purpose of book depreciation, tax depreciation, cost accounting depreciation, etc.

: For every asset, depreciation terms and values can be managed at depreciation area level

: At least one depreciation area is required to record book values

: We can manage asset valuation in parallel in up to 99 depreciation areas

12

Page 13: SAP FI-AA (Asset Accounting)

Organisation Structure – Depreciation Areas (2 of 7)

:Depreciation areas are set up to accommodate calculation of parallel values of depreciation for different purposes (cont.):: Rules for posting to General Ledger is configured per

depreciation area. Some of the rules are:•0 – no values are posted to GL; e.g., internal costing

•1 – post assets in GL real time; e.g., book depreciation

•2 – post assets periodically in GL; e.g., revaluation

•3 – only depreciation posted in GL; e.g., tax depreciation

13

Page 14: SAP FI-AA (Asset Accounting)

Organisation Structure – Depreciation Areas (3 of 7)

:Depreciation areas are set up to accommodate calculation of parallel values of depreciation for different purposes (cont.):: Rules for posting to General Ledger are

configured per depreciation area. List of rules are:

14

Page 15: SAP FI-AA (Asset Accounting)

Organisation Structure – Depreciation Areas (4 of 7)

:Depreciation areas are set up to accommodate calculation of parallel values of depreciation for different purposes (cont.):: Depreciation areas can facilitate parallel valuation in

asset accounting, and they can be assigned to the ledger groups to integrate parallel valuation in asset accounting with parallel valuation in general ledger (Ledger approach)

: Leading depreciation area is assigned to ledger group containing the leading ledger

15

Page 16: SAP FI-AA (Asset Accounting)

Organisation Structure – Depreciation Areas (5 of 7)

:Depreciation areas are set up to accommodate calculation of parallel values of depreciation for different purposes (cont.):– Assignment of depreciation areas to Parallel Ledgers

16

Assignment of depreciation area to the ledger group facilitates parallel accounting

Page 17: SAP FI-AA (Asset Accounting)

Organisation Structure – Depreciation Areas (6 of 7)

:Each Depreciation area is set up as either a “Real” depreciation area or as “Derived” depreciation areas:•Derived Depreciation Area – Depreciation is

calculated, using a formula on values from 2 or more “Real” depreciation areas; values are calculated dynamically and made available for reporting.

•Real Depreciation Area – Values are updated in this depreciation area when postings are made and are available for evaluation. Depreciation terms are defined for an asset class for “Real” depreciation areas.

17

Page 18: SAP FI-AA (Asset Accounting)

Organisation Structure – Depreciation Areas (7 of 7)

: Transfer rules for posting of APC values and depreciation terms for each depreciation areas are specified.

: Transfer rules can ensure that certain depreciation areas have identical values/basis.

18

• Most depreciation areas will copy the asset value (APC) from Book Depreciation

Page 19: SAP FI-AA (Asset Accounting)

Organisation Structure – Depreciation Areas – Example

: Standard Chart of Depreciation for Australia (0AU) has five depreciation areas:

19

01 Book deprec. Book depreciation (uses Straight Line method)

15 Tax B/S Tax balance sheet (uses declining then straight line)

30 Group AUD Consolidated bal sheet in local currency

31 Group USD Consolidated bal sheet in group currency

32 BkDep(g.cur) Book depreciation in group currency

Page 20: SAP FI-AA (Asset Accounting)

Organisation Structure – Depreciation Key

: Determines how the depreciation is calculated through calculation method configuration; e.g., straight line method, 25% double declining method, etc.

: Assigned per depreciation area at asset master data

: Defaulted per asset class; i.e., classification of similar asset

: There are four calculation methods:: Base method: Declining balance method: Period control method: Multi-level method

20

Depreciation Key

Calculation Method

Chart of Depreciation

Page 21: SAP FI-AA (Asset Accounting)

Organisation Structure – Calculation Method: Base Method

:Base method configuration includes determination of depreciation calculation method: E.g., 1 % from useful life - Depreciation % rate is

derived from the useful life of the asset, maintained in the asset master.

: E.g., 2 explicit % - Depreciation % rate has to be explicitly specified in the depreciation configuration. (Multi-Level Method)

:System does not allow addition of depreciation calculation method; we need to choose one from the available list21

Page 22: SAP FI-AA (Asset Accounting)

Organisation Structure – Calculation Method: Declining Balance Method (1 of 3)

: Declining Balance Methods are an annual calculation of depreciation amounts that are reduced by a constant percentage

: The percentage is calculated from the useful life and a multiplication factor and is subject to maximum and minimum percentage limits. This percentage is then multiplied with the base value (i.e., net book value of the fixed asset at the beginning of the year) to compute the depreciation amount

22

Page 23: SAP FI-AA (Asset Accounting)

Organisation Structure – Calculation Method: Declining Balance Method (2 of 3)

: For each declining-balance method, specify:: A multiplication factor for determining the

depreciation percentage rate

: An upper limit for the depreciation percentage rate

: A lower limit for the depreciation percentage rate

: Depreciation = net book value * percentage rate from expected useful life and factor

: SAP will calculate the yearly amount first and then divide the figure with number of periods to get constant value per period23

Page 24: SAP FI-AA (Asset Accounting)

Organisation Structure – Calculation Method: Declining Balance Method (3 of 3)

24

Example:Useful life: 10 years

Net book value: 700 USDMultiplication factor: 1.5

Depreciation = 700 * (1/ 10 * 1.5) = 105 USD for the year

If there are 12 periods, depreciation = 105 / 12 = 8.75 USD/period

Page 25: SAP FI-AA (Asset Accounting)

Calculation Method – Multi-Level Method

: Should be configured according to the Base Method selected: E.g., if a depreciation key uses a Base Method with

explicit %, then multi-level method for that depreciation key should contain explicit % rates

: Define depreciation Base Value: E.g., if Base Value = 01 (Acquisition Value) is selected,

then every time depreciation is calculated the acquisition value of the asset will be the base on which the depreciation percentage will be applied

: Example below is for explicit % with base value = acquisition value

25

Year Percentage Depreciation1 2% year 1 – 9 2% x acquisition value

10 6% year 10 6% x acquisition value

11 5% year 11 5% x acquisition value

18 4% year 18 onwards 4% x acquisition value

Page 26: SAP FI-AA (Asset Accounting)

Calculation Method – Period Control

01 – Pro rata at period start date Depreciation is calculated at monthly basis

02 – Pro rata up to mid period at period start date

if posting date < mid period, depreciation is calculated for the period, else depreciation is calculated for the next period

06 – At the start of the year Depreciation is calculated at yearly basis

08 – At the end of the year Any changes for the year will take effect in the next year

26

: Determine when depreciation is calculated in the system relative to the transaction posting date

: Examples of period control:

: Can be set up differently per transaction:: Period control for acquisition in the capitalization year: Period control for acquisition in the following year: Period control for retirement: Period control for transfer

Page 27: SAP FI-AA (Asset Accounting)

Depreciation Key – Period Control (cont.)

: Depreciation to the day: Specifies that the system calculates depreciation

to the day : Period control parameters are ignored with this

switched ON: This applies to all transactions (acquisitions,

retirements, and transfers) : With this setting the system always uses the asset

value date as the depreciation start date : Warning

: Once the asset has been capitalised, you cannot switch to or from a depreciation key with this setting

27

Page 28: SAP FI-AA (Asset Accounting)

Depreciation Key – Change Over Method

: Used to setup depreciation key by phases; i.e., system will automatically change the combination of calculation methods (depreciation terms) once the event specified in the changeover method has occurred

28

• In this example, depreciation is determined by the calculation methods in phase 1. This is compared with the straight line rate which is computed based on the useful life. Whenever the straight line depreciation is higher, change over to Phase 2 happens.

Page 29: SAP FI-AA (Asset Accounting)

Organisation Structure – Asset Class (1 of 4)

: Asset class facilitates classification of similar asset; e.g., Land & Building, Plant & Machinery, Office Equipments, etc.

: The catalogue of asset classes can be used by all the company codes that use asset accounting component.

: The following configurations are set up at asset class level:: Assignment of Asset number can be set up as internally

assigned or externally assigned. Number range is also defined at the asset class level for each company code.

: Screen layout controls the asset master data screen and specifies if a field is optional, required, suppressed for data entry.

: Default depreciation key and useful life

: GL accounts through account determination assignment

29

Page 30: SAP FI-AA (Asset Accounting)

Organisation Structure – Asset Class (2 of 4)

30

• Acquisition & Prod cost • Accumulated Depreciation

• Factory 1• Factory 2• Office 1

• Machine 1• Machine 2

Asset Class Reconciliation Account

• Acquisition & Prod cost• Accumulated DepreciationBuilding

Machinery

Asset

Page 31: SAP FI-AA (Asset Accounting)

Organisation Structure – Asset Class (3 of 4)

: Asset Class is linked to any (or) all the depreciation areas in a chart of depreciation. This is achieved by “activating” the appropriate depreciation areas

: Asset Class needs to be activated for the required depreciation areas in a chart of depreciation. This activation has to be performed for each asset class for all the charts of depreciation, which are actively used

: Default depreciation key and useful life is specified for an asset class for each depreciation area in a chart of depreciation

31

Page 32: SAP FI-AA (Asset Accounting)

Organisation Structure – Asset Class (4 of 4)

: Determination of depreciation areas for asset class

32

• Depreciation area is activated for an asset class

Page 33: SAP FI-AA (Asset Accounting)

Organisation Structure – Account Determination (1 of 3)

: Compilation of GL accounts used for asset posting: Posting to asset, i.e., via asset number, will

update these GL accounts that are determined using “account determination”.

: One account determination can be used for more than one asset class: For example, Building and Structure can be

defined as separate asset classes; however, depending on the chart of account structure, they could be assigned to one account determination

33

Question: Can we directly post to asset acq. accounts? If we post to an asset, when can we see the values in GL?

Page 34: SAP FI-AA (Asset Accounting)

Organisation Structure – Account Determination (2 of 3)

: GL accounts are set up per depreciation area, i.e., not all accounts need to be configured as posting to GL varies per depreciation area: Key GL accounts:

: Acquisition & Production Cost (reconciliation account, B/S account)

: Clearing account revenue from asset sale: Gain & Loss from asset sale: Loss made on asset retirement without revenue; i.e.,

scrap/write off: Accumulated depreciation (reconciliation account, B/S

account): Depreciation expense34Question: Can we directly post to asset acq. accounts? If we post to an asset, when can we see the values in Question: Can we directly post to asset acq. accounts? If we post to an asset, when can we see the values in

GL?GL?

Page 35: SAP FI-AA (Asset Accounting)

Organisation Structure – Account Determination (3 of 3)

: Determination of GL accounts – Simple illustration

35

Company codeAsset Class

Account Determination

Asset Master

Chart of depreciation

(COD)

01 – Book depren.

-----

Chart of Account

GL 11000 - Acquisition

-----

-----

Transaction posting to an asset sub-ledger will update the General Ledger:

COD + COA + Account Determination + depreciation Area + Transaction => GL account

Page 36: SAP FI-AA (Asset Accounting)

Asset Organisational Hierarchy – Example

36

Chart of Depreciation(copied from country ABC)

Company Code 1 Company Code 2

01 Book Depreciation02 Tax Depreciation03 Cost Accounting Depreciation

Asset Class – 100 Building

100003 Acquisition – Office Equip.130003 Accum. Depr. – Office Equip.400003 Depr. Expense – Office Equip.etc

100002 Acquisition - Machinery130002 Accum. Depr. - Machinery400002 Depr. Expense - Machineryetc

100001 Acquisition - Building130001 Accum. Depr. - Building400001 Depr. Expense - Buildingetc

Acct Determination 1000 (GL accounts)

Asset Class – 200 Machinery Asset Class – 300 Office Equip.

Acct Determination 2000 (GL accounts)

Acct Determination 3000 (GL accounts)

Depreciation Area

1000001 Building A1000002 Building B

Company Code 3

2000001 Machine 1232000002 Machine 234

3000001 Printer 2223000002 Computer XYZ

Page 37: SAP FI-AA (Asset Accounting)

Low Value Asset (LVA)

: Fully depreciated in the year of purchase or in the period of acquisition : Even though LVA value is not significant, it is

considered necessary to keep track of the asset

: Since individual value is little, can be managed collectively in single asset master

: Separate asset class is created for LVA

37

Page 38: SAP FI-AA (Asset Accounting)

Low Value Asset (cont.)

: Maximum allowable is specified in the configuration: Individual check (individual management)

: When the acquisition is posted, the entire acquisition and production costs of the asset are compared with the LVA maximum amount

: Quantity check (collective management) : When the acquisition is posted, the entire

acquisition and production costs of the asset, divided by the total quantity, are checked against the LVA maximum amount

38

Page 39: SAP FI-AA (Asset Accounting)

System Walkthrough 4.1 – Chart of Depreciation

39

• Refer to System Walkthrough 4.1 – Chart of Depreciation in your Faculty Guide.

– Chart of Depreciation– Tax Indicator – Assign Chart of Depreciation to Company code

(Ensure the prerequisites are met before the assignment is made).

Page 40: SAP FI-AA (Asset Accounting)

System Walkthrough 4.2 – Depreciation Area

41

• Refer to System Walkthrough 4.2 – Depreciation Area in your Faculty Guide.

– Depreciation Area– Asset Class

Page 41: SAP FI-AA (Asset Accounting)

System Walkthrough 4.3 –Depreciation Key Configuration

43

• Refer to System Walkthrough 4.3 – Depreciation Key Configuration in your Faculty Guide.

– Depreciation Key– Determine depreciation areas – GL account determination

Page 42: SAP FI-AA (Asset Accounting)

Questions

45

Page 43: SAP FI-AA (Asset Accounting)

Agenda – Day 4

46

• Review of Day 3• Asset Accounting – Key Concepts & Organisation

Structure• Asset Accounting – Master Data• Asset Accounting – Business Transactions• Asset Accounting – Period End Closing & Reporting• New GL Online Document Splitting

Page 44: SAP FI-AA (Asset Accounting)

Asset Accounting

: Master Data: Asset Number & Sub Number

: Asset Master

: Mass Changes to Master Data

: Asset Master Data Conversion

47

Page 45: SAP FI-AA (Asset Accounting)

Master Data – Asset Number

: Asset will be assigned an asset number within the asset class number range in a company code

: Every uniquely identifiable asset, for which valuation/depreciation has to be recorded and maintained separately, is identified in the AA with a unique asset master record.

: Each asset master record is a sub-ledger, linked to the General Ledger through account determination.

: Excluding depreciation journal, every asset transaction should be posted to the asset number; i.e., asset account.

: General Ledger can be posted in real time or in batch mode, based on the configuration setup for the depreciation area in the chart of depreciation.48

Page 46: SAP FI-AA (Asset Accounting)

Master Data – Asset Sub-number

: Sub-number can be used for differentiating part of the main asset

: Four-digit suffix of the main asset number : Main asset fields can be copied to sub number master data

as set up in the screen layout configuration; e.g., cost centre is usually maintained at the main asset level

: Asset sub number is an independent asset: Effort for maintaining asset with 1 sub number will be doubled: Retirement needs to be done for main asset and each sub number: Depreciation can be calculated differently from the main asset. For

example, Machine A with asset number 150056 has 3 major components that need individual maintenance and tracking: They are created as sub-asset numbers to the main asset 150056-0001 Power supply, 150056-0002 Conveyor belt, 150056-0003 Coolant.

49

Page 47: SAP FI-AA (Asset Accounting)

Asset Master

: Store asset specification & detailed information. Optional and mandatory fields are set up by defining screen layout rules at the asset class level

50

General Info

(Description)

General Info

(Description)

Time-dependent assignment

Time-dependent assignment

• Description 1• Description 2

We can specify information validity using Time Interval• Plant: physical plant of the asset as set up in Material

Management module• Cost Centre: owner of the asset that will bear the

depreciation expense. Can be used as account assignment object to derive segment for segment reporting.

Page 48: SAP FI-AA (Asset Accounting)

Asset Management

51

Allocation Allocation

OriginOrigin

• Evaluation group: Additional information for reporting purpose. There are 5 evaluation groups available with user-defined values in configuration. For example, evaluation group 1 for location of the asset (e.g., area 1, area 2, etc); evaluation group 2 for describing the production line (e.g., process 1, process 2, etc.)

• Vendor: supplier of the asset, it will be populated

automatically upon asset acquisition

Depreciation

Areas

Depreciation

Areas

• Depreciation key: how the depreciation is calculated; e.g., straight line method, double declining method

• Useful life: how long the depreciation will be calculated

• Ordinary Depreciation start date: when the depreciation is started

– Depreciation key and useful life are defaulted per asset class based on configuration

– Depreciation terms can also be set as time-dependent in later version (ECC 6.0)

Page 49: SAP FI-AA (Asset Accounting)

System Walkthrough 4.4 – Asset Master

: Refer to System Walkthrough 4.4 – Asset Master in your Faculty Guide.: Display/Create Asset

52

Page 50: SAP FI-AA (Asset Accounting)

Mass Changes to Master Data

: Asset Accounting provides capability to update fields in several asset master records using mass changes. Some instances for mass changes are given below: When there is a change to the Cost Centre

structure, you have to change the Cost Centre assignment of all assets affected

: Changes made at the asset class level. Changes at this level affect only those assets that are created after the change was made. This change should be applied to the already existing assets

: User error for large number of assets53

Page 51: SAP FI-AA (Asset Accounting)

Mass Changes to Master Data (cont.)

: Steps to execute mass changes:: Defining the change rules using Validation &

Substitution rule (transaction OA02) what the changes are

: Selecting the assets and entering them in a worklist (transaction AR01) verification step that only the asset listed are to be changed

: Checking and correcting the worklist, and releasing the worklist (transaction AR31) execution of the mass changes

54

Define the change rule Asset selection to worklist Release the worklist

e.g., change cost centre A to B

e.g., if asset class = machinery for company code A, acquisition date after 01.01.2005

Page 52: SAP FI-AA (Asset Accounting)

Asset Master Data Conversion (1 of 3)

: Use transaction AS91 Create Legacy Data to create converted asset (AS92 to Change legacy data already created)

: Take over values (i.e., asset values at the change over date/SAP go live date) by depreciation area need to be uploaded per asset master: The take over values to be populated are depending on the

Depreciation Area setup (how the depreciation area gets the value)

: Generally you should convert “gross” values (original acquisition cost and current accumulated depreciation) rather than “net” values (net value of assets at time of conversion)

: GL Balance is uploaded separately from the asset values in Asset Accounting: AS91 posts only to FI-AA and does NOT update the GL account

balance: Reconciliation between the GL balance and total asset values

needs to be done after to data upload – ensure they match!55

Page 53: SAP FI-AA (Asset Accounting)

Asset Master Data Conversion (2 of 3)

: Take over values are maintained for each Asset master during legacy data transfer

56

Page 54: SAP FI-AA (Asset Accounting)

Asset Master Data Conversion (3 of 3)

57

• Acquisition value

• Accumulated depreciation - up to the end of last fiscal year

• Depreciation value from the beginning of the year until the last period before the take over date

Page 55: SAP FI-AA (Asset Accounting)

System Walkthrough 4.5 – Legacy Old Asset

: Refer to System Walkthrough 4.5 – Legacy Old Asset in your Faculty Guide.: Display Legacy Asset

: Mass Changes

58

Page 56: SAP FI-AA (Asset Accounting)

Exercise 4.1 – Create Asset

: Refer to Exercise 4.1 - Create Asset in your Participant Workbook.: Your task is to create an asset master.

59

Page 57: SAP FI-AA (Asset Accounting)

Exercise 4.2 – Create Asset Sub Number

: Refer to Exercise 4.2 - Create Asset Sub Number in your Participant Workbook.: Your task is to create an asset sub number

for the asset created in Exercise 4.1.

60

Page 58: SAP FI-AA (Asset Accounting)

Exercise 4.3 – Configuration: Add Values to Evaluation Group

: Refer to Exercise 4.3 – Configuration: Add Values to Evaluation Group in your Participant Workbook.: Your task is to add a new value to an

evaluation group.

61

Page 59: SAP FI-AA (Asset Accounting)

Questions

62

Page 60: SAP FI-AA (Asset Accounting)

Agenda – Day 4

63

• Review of Day 3• Asset Accounting – Key Concepts & Organisation

Structure• Asset Accounting – Master Data• Asset Accounting – Business Transactions• Asset Accounting – Period End Closing & Reporting• New GL Online Document Splitting

Page 61: SAP FI-AA (Asset Accounting)

Asset Business Transactions Overview

: Asset business transactions include Acquisitions, Transfers, Retirements.

: Key parameters that govern asset accounting transactions include document type, posting key, transaction type.

: FI Document types used for Asset business transactions:: AA Asset Posting: AF Depreciation Posting

: Posting key used for postings Asset related transactions: 70 Debit Asset: 75 Credit Asset

: Transaction type : Mandatory information for every asset posting to differentiate

business transactions (acquisitions, transfers, retirements, etc.): Each transaction type belongs a transaction type group (which

reflects a category of business transactions): SAP Standard transaction types are commonly used.

64

Page 62: SAP FI-AA (Asset Accounting)

Asset Business Transactions Overview (cont.)

: Transaction type - Examples:

65

1xx Acquisition 1xx Acquisition

2xx Retirement2xx Retirement

3xx Transfer3xx Transfer

e.g., 100 External acquisition, 110 In-house acquisition

e.g., 200 Retirement without revenue, 260 Retirement for new acquisition with revenue

e.g., 320 Transfer (retiring) of new acquisition, 330 Receiving transfer of new acquisition

• Each asset transaction creates an Asset Accounting document as well as an FI accounting document at the minimum

Page 63: SAP FI-AA (Asset Accounting)

Asset Business Transactions Overview – Asset Document

66

• Transaction Type 100 is used here for external acquisition (i.e., acquisition from vendor)

Page 64: SAP FI-AA (Asset Accounting)

Asset Business Transactions Overview – Asset Document (cont.)

67

Page 65: SAP FI-AA (Asset Accounting)

Asset Acquisition – Direct FI Process

: Manual asset acquisition posting in FI (Accounts Payable) through vendor invoice; i.e., transaction F-90

: Asset document and an FI accounting document are created

68

Ps. Key Account D/C70 Asset account Dr31 Vendor account Cr

Page 66: SAP FI-AA (Asset Accounting)

Asset Acquisition – Purchase Process

: If MM module is implemented, asset posting can be automatically generated using account assigned purchase orders. Purchase Requisition/Purchase order should be specified with account assignment category A (= Asset)

69

Create Asset Master

Create Purchase Requisition (PR)

Create Purchase Order (PO)

Goods Receipt

Asset acquisition:Dr. AssetCr. GR/IR clearing

Asset Master needs to be created before PR creation as the number should be specified in PR/PO

User should put asset number in the PR/PO

FI - AA MM - Purchasing MM - Purchasing MM - Purchasing

Page 67: SAP FI-AA (Asset Accounting)

Asset Acquisition – Purchase Process – Example (1 of 3)

70

Page 68: SAP FI-AA (Asset Accounting)

Asset Acquisition – Purchase Process – Example (2 of 3)

71

• Configuration of account assignment category “A”– Consumption indicator is A (Assets)– Field Status is set for field “Asset” as mandatory entry.

Page 69: SAP FI-AA (Asset Accounting)

Asset Acquisition – Purchase Process – Example (3 of 3)

72

• Material document is created at the time of goods receipt. Asset document and FI accounting document are automatically generated

Asset acquisition (Purchase Process)Dr. AssetCr. GR/IR clearing

Page 70: SAP FI-AA (Asset Accounting)

Asset Retirement

: There are three types of asset retirement:

– Retirement with revenue to customer (F-92)

– Retirement with revenue without specifying the customer (ABAON)

– Retirement without revenue/scrapping (ABAVN)73

Dr. Accumulated depreciationDr. Write-off expense/ Loss on property Cr. Asset

Dr. Proceed from asset saleDr. Accumulated DepreciationDr/Cr. Gain/Loss on asset sale Cr. Asset

Dr. Bank clearing Cr. Proceed from asset sale Cr. Vat out

Dr. Accum depreciationDr. CustomerDr. Proceed on asset sale Cr.Proceed on asset sale Cr. Asset Cr. VAT out Dr/Cr. Gain/loss on property

Dr. Bank clearing Cr. Customer

Note: Proceed on asset sale account need to be defined in configuration

Page 71: SAP FI-AA (Asset Accounting)

Asset Transfer

: Transfer from one cost centre to the other (AS02)

: This is done through asset master data change; i.e., cost centre change

: No Accounting document is created

: Transfer location (AS02)

: This is also done through asset master data change, i.e., depending on the setup, can be plant change, evaluation group change, or other field change

: No FI document is created

74

Page 72: SAP FI-AA (Asset Accounting)

Asset Transfer (cont.)

: Transfer between company codes (ABT1N): This is done through FI document posting

: Can be done separately, i.e., asset retirement in one company and asset acquisition in the other company, or if intercompany transaction is setup through intercompany journal

: Transfer between one asset to another asset (ABUMN): This is done through FI document posting

: Both acquisition and accumulated depreciation values are transferred

75

Dr. Asset (target) Cr. Accumulated depr (target)

Dr. Accumulated depr (source) Cr. Asset (source)

Page 73: SAP FI-AA (Asset Accounting)

Asset Business Transactions – Segment Reporting (1 of 5)

76

• Asset Accounting component facilitates segment reporting.• Use of Account Assignment Objects is necessary to achieve

“Segment Reporting” using the New GL.

• Example : Cost centre (Object Name: KOSTL) has been activated

• Note: Users cannot add to the list of account assignment objects. Activation status can be changed based on business requirements

Page 74: SAP FI-AA (Asset Accounting)

Asset Business Transactions – Segment Reporting (2 of 5)

77

• Profit centre & segment can be “derived” from other cost (e.g., via cost centre)

• For segment reporting, assign the account assignment types (APC Values and depreciation posting) to the Account. Assignment Object, for the transactions, for each of the company codes

Page 75: SAP FI-AA (Asset Accounting)

Asset Business Transactions – Segment Reporting (3 of 5)

78

• Segment: EMEA is thus derived for asset 3000 0

1

2

3

Page 76: SAP FI-AA (Asset Accounting)

Asset Business Transactions – Segment Reporting (4 of 5)

79

• FI Invoice posting for asset acquisition -> Derivation of segment

Page 77: SAP FI-AA (Asset Accounting)

Asset Business Transactions – Segment Reporting (5 of 5)

80

• Document Splitting

– Vendor/tax line items are split into multiple line items based on the segments derived in the offsetting line items, in this case, the asset line items

– Document line items are split for the scenarios that have been configured in FI-GL for segment reporting

Page 78: SAP FI-AA (Asset Accounting)

System Walkthrough 4.6 – Asset – Business Transactions

: Refer to System Walkthrough 4.6 – Asset – Business Transactions in your Faculty Guide.

: Asset Acquisition

: Asset Change Cost Centre

: Transfer Asset to Asset

: Retirement with Revenue

: Scrapping

81

Page 79: SAP FI-AA (Asset Accounting)

Exercise 4.4 – Asset Acquisition from FI

: Refer to Exercise 4.4 – Asset Acquisition from FI in your Participant Workbook.: Your task is to post an asset acquisition to

the asset master created in Exercise 4.1.

82

Page 80: SAP FI-AA (Asset Accounting)

Exercise 4.5 – Asset Explorer

: Refer to Exercise 4.5 – Asset Explorer in your Participant Workbook.: Your task is to display the asset.

83

Page 81: SAP FI-AA (Asset Accounting)

Exercise 4.6 – Asset Transfer – Change Cost Centre

: Refer to Exercise 4.6 – Asset Transfer – Change Cost Centre in your Participant Workbook.: Your task is to transfer an asset from one

department to another.

84

Page 82: SAP FI-AA (Asset Accounting)

Exercise 4.7 – Asset Transfer – Asset to Asset

: Refer to Exercise 4.7 – Asset Transfer – Asset to Asset in your Participant Workbook.: Your task is to reclassify an asset.

85

Page 83: SAP FI-AA (Asset Accounting)

Exercise 4.8 – Asset Retirement with Revenue to Customer

: Refer to Exercise 4.8 – Asset Retirement with Revenue to Customer in your Participant Workbook.: Your task is to record the sale of an asset

with revenue to a customer.

86

Page 84: SAP FI-AA (Asset Accounting)

Exercise 4.9 – Display Asset Document

: Refer to Exercise 4.9 – Display Asset Document in your Participant Workbook.: Your task is to display the asset

documents.

87

Page 85: SAP FI-AA (Asset Accounting)

Questions

88

Page 86: SAP FI-AA (Asset Accounting)

Agenda – Day 4

89

• Review of Day 3• Asset Accounting – Key Concepts & Organisation

Structure• Asset Accounting – Master Data• Asset Accounting – Business Transactions• Asset Accounting – Period End Closing & Reporting• New GL Online Document Splitting

Page 87: SAP FI-AA (Asset Accounting)

Period End Closing & Reporting

: Depreciation Run

: Asset Under Construction (AUC) Settlement

: Year End Closing: Open & Close Period for Asset

: Fiscal Year Change

: Reporting

90

Page 88: SAP FI-AA (Asset Accounting)

Depreciation Run

: Depreciation must be run sequentially by period; i.e., period 1 should be run successfully before period 2 depreciation

: Depreciation run options:: Planned Depreciation: run this every end of

period (month end)

: Repeat Run: if depreciation has already been run and it is required to run the depreciation again. SAP will only post depreciation that has not been posted; i.e., there will not be double posting91

Page 89: SAP FI-AA (Asset Accounting)

Depreciation Run (cont.)

: Depreciation run options (cont.):: Restart Posting Run: if there are errors during

depreciation posting, after correcting the error (for instance, GL account not found), execute “restart posting run” (the old session should be deleted)

: Unplanned Posting Run: to run depreciation for several periods, e.g., if period 1 and 2 have not been run and it is desired to run period 3, choose unplanned posting run for period 3

92

Page 90: SAP FI-AA (Asset Accounting)

Depreciation Run – Process Flow

93

Run Actual Depreciation

Test Run Depreciation

Rectify the Error (if any)

Rectify the Error(if any) & Repeat Depreciation Run

Check Depreciation

Run Log

Dr. Depreciation Expense

Cr. Accumulated Depreciation

Page 91: SAP FI-AA (Asset Accounting)

Asset Under Construction (AUC) Settlement (1 of 5)

: AUC represents asset that has not finished being constructed, i.e., capital work in progress, and therefore not being depreciated. Once the work is completed, AUC should be settled to fixed asset

: AUC will collect all the cost from external (purchase), internal work, and material consumption. It is defined as separate asset class with separate account determination

94

Page 92: SAP FI-AA (Asset Accounting)

Asset Under Construction (AUC) Settlement (2 of 5)

95

Expense

e.g., Plant Maintenance Order (for repair maintenance)

WBS – Project System (for project)

Expense

Expense

Material

Material

Material

AUC

Month End

Settlement to AUC Settlement to fixed asset

Fixed Asset

Execute AuCSettlement

Create AuC Asset master in AuC

asset class

AuC Asset receivespostings

Define Distribution Rules for AuC asset

Create Final asset master

AuC Settlement Process Flow in SAP system

Month End –

After the

repair/project

finish

Repairs

Page 93: SAP FI-AA (Asset Accounting)

Asset Under Construction (AUC) Settlement (3 of 5)

: There are two types of settlement:: AUC Settlement without Line Item

Management

: AUC Settlement with Line Item Management

96

Page 94: SAP FI-AA (Asset Accounting)

Asset Under Construction (AUC) Settlement (4 of 5)

: AUC Settlement without Line Item Management: Similar to transfer between two assets

within the same company code

97

Dr. Asset

Cr. AUC

Page 95: SAP FI-AA (Asset Accounting)

Asset Under Construction (AUC) Settlement (5 of 5)

: AUC Settlement with Line Item Management: Distribution rule needs to be defined per AUC to set

the target settlement and % of distribution

: Line items in the current year that do not require capitalization (i.e., expense) can be settled as adjustment postings to Cost Centre

98

Dr. Asset

Cr. AUC

20 %

Page 96: SAP FI-AA (Asset Accounting)

Year End Closing (1 of 3)

: Fiscal year change (AJRW): the opening of a new fiscal year for a company code. Asset values from the previous fiscal year are carried forward cumulatively into the new fiscal year: No posting can be made to the new fiscal year

before fiscal year change

: Before changing to fiscal year YYYY, fiscal year YYYY – 2 should be closed

: Carried out as background processing for performance reasons 99

Page 97: SAP FI-AA (Asset Accounting)

Year End Closing (2 of 3)

:Close fiscal year (AJAB): Once the fiscal year is closed, no posting can be made to Asset Accounting in that fiscal year: Current fiscal year cannot be closed

: Fiscal year can be re-opened if necessary. This is not a recommended practice, though

: Should be done sequentially; i.e., close fiscal year the year following the last closed fiscal year

: Carried out as background processing for performance reasons100

Page 98: SAP FI-AA (Asset Accounting)

Year End Closing (3 of 3)

: Fiscal year can only be closed if:: All depreciation runs for the year are

completed without any error: All assets acquired in the fiscal year have

already been capitalized. Exclusion can be made for asset under construction

: All incomplete assets (master records) have been rectified

101

Page 99: SAP FI-AA (Asset Accounting)

Reporting (1 of 4)

: All standard reporting can be accessed from Information System folder: Asset History Sheet list of asset values

with detail of asset transactions

: Asset Balance by Asset number list of asset values

: Posted Depreciation Related to Cost Centres list of posted depreciation per cost centre per period

: List of Origins of Asset Debit list of asset acquisition by source of addition102

Page 100: SAP FI-AA (Asset Accounting)

Reporting (2 of 4)

: All standard reporting can be accessed from Information System folder (cont.): Asset Transactions, Asset Acquisition,

Asset Retirement

: Directory of Unposted Asset list of asset master without value

: Depreciation Forecast simulate depreciation/asset values for current or future fiscal year

103

Page 101: SAP FI-AA (Asset Accounting)

Reporting (3 of 4)

: Sort Version: control data sorting and totaling in asset reports: Maintained in configuration

: User-defined sort version starts with ‘Z’: For example:

0007 Company Code/Asset Class sort records based on company code – asset class

Z001 Company Code/Asset Class/Cost Centre/Eval Group 1 sort records based on company code – asset class – cost

centre – eval group 1

104

Page 102: SAP FI-AA (Asset Accounting)

Reporting (4 of 4)

: Depreciation Simulation: simulate asset values/depreciation using different depreciation key for future fiscal years: Need to create/maintain Simulation Version

before running the report (OAV7)

: E.g., Z1 – Simulate values for all asset belonging to asset class 2000 with depreciation key DG30 to use new depreciation key LINK and increase the useful life by 20%

: Run Depreciation Forecast report and specify the simulation version

105

Page 103: SAP FI-AA (Asset Accounting)

System Walkthrough 4.7 – Depreciation

: Refer to System Walkthrough 4.7 – Depreciation in your Faculty Guide.: Depreciation and Log

: AUC Line Settlement

: Maintain Sort Version (OAVI)

: Simulation Version (OAV7)

106

Page 104: SAP FI-AA (Asset Accounting)

System Walkthrough 4.8 –Reporting

: Refer to System Walkthrough 4.8 – Reporting in your Faculty Guide.: Asset History Sheet - S_ALR_87011990

: Asset Balance by Asset Number – S_ALR_87011963

: Posted Depreciation Related to Cost Centres - S_ALR_87010175

: List of Origins of Asset Debit - S_ALR_87012058

: Asset Transactions, Asset Acquisition, Asset Retirement – S_ALR_87012048, S_ALR_87012051, S_ALR_87012052

: Directory of Un posted Asset - S_ALR_87012056

: Depreciation Current Year- S_ALR_87012026 107

Page 105: SAP FI-AA (Asset Accounting)

Exercise 4.10 – AUC Settlement

: Refer to Exercise 4.10 - AUC Settlement in your Participant Workbook. : Your task is to create receiver asset (fixed

asset), create a settlement rule from the AUC to the fixed asset, and post the settlement.

109

Page 106: SAP FI-AA (Asset Accounting)

Exercise 4.11 – Configuration: Maintain Sort Version

: Refer to Exercise 4.11 – Configuration: Maintain Sort Version in your Participant Workbook. : Your task is to create a new sort variant to

be used in Asset reporting.

110

Page 107: SAP FI-AA (Asset Accounting)

Exercises 4.12 through 4.19 – Reporting

: Refer to Exercises 4.12 to 4.19 in your Participant Workbook.: Your task is to execute the asset

accounting-related reports

111

Page 108: SAP FI-AA (Asset Accounting)

Optional Class Exercises

: Refer to the Optional Class Exercises in your Participant Workbook.: Run planned depreciation and display log

for the period

: Each participant can do Repeat Run after the planned depreciation for a particular asset

112

Page 109: SAP FI-AA (Asset Accounting)

Agenda – Day 4

113

• Review of Day 3• Asset Accounting – Key Concepts & Organisation

Structure• Asset Accounting – Master Data• Asset Accounting – Business Transactions• Asset Accounting – Period End Closing & Reporting• New GL Online Document Splitting

Page 110: SAP FI-AA (Asset Accounting)

Online Document Splitting – New GL Functionality

114

• Example – Document Splitting• Document Splitting & Zero Balancing• Configuration • Logic for Document Splitting Logic• Customizing Steps • Extended Document Splitting – Document Splitting

Rule• Examples of Document Splitting & Zero Balancing• Recommendations

Page 111: SAP FI-AA (Asset Accounting)

Example – Document Splitting

115

Page 112: SAP FI-AA (Asset Accounting)

Document Splitting & Zero Balancing

: Activate Document Splitting for the client and at the same time it can be deactivated for a specific company code

: Recommendations:: Inheritance - activate the inheritance

: If no characteristics are specified, characteristics will be inherited from the lines with characteristics

: Default assignment: Make sure that you specify a default assignment for cases

where the characteristics cannot be determined: General Ledger Account Assignment to Item Categories

: Revenue, Expense, Balance Sheet accounts have to be assigned to the correct item categories (e.g., 30000, 20000, and 10000)

116

Page 113: SAP FI-AA (Asset Accounting)

Document Splitting Configuration (1 of 5)

117

• Document Splitting - Business Transaction– Business Transaction (BT): A business transaction is

an event that leads to a value update in accounting

Page 114: SAP FI-AA (Asset Accounting)

118

• Document Splitting - Item Category– Item category: The item category characterised the

items of an accounting document

Document Splitting Configuration (2 of 5)

Page 115: SAP FI-AA (Asset Accounting)

Document Splitting Configuration (3 of 5)

119

• Document Splitting - BTV– Business Transaction Variant (BTV): A BTV is a special version

of a business transaction in which you can further limit the item categories that are specified in the business transaction• See the BTV 0001 for BT 0300• Note: The vendor item is required for this BTV

Page 116: SAP FI-AA (Asset Accounting)

Document Splitting Configuration (4 of 5)

120

• Document Splitting - Splitting Method– The splitting method defines how the split is performed

• The splitting method combined with the Business Transaction and the Business Transaction Variant produce a rule

• Procedure 0000000012 is the standard (recommended to customers)

Page 117: SAP FI-AA (Asset Accounting)

Document Splitting Configuration (5 of 5)

121

• Document Splitting - Splitting Rule– Rule: Determines which item categories will be split, as well as

which base can be used for splitting• E.g., the Customer Invoices Business Transaction (0200) with BTV

(0001) will be split along with Taxes on Sales/Purchases items based on item categories 01000, 01100, 07000, 20000 and 30000

Page 118: SAP FI-AA (Asset Accounting)

Logic for Document Splitting

122

• Document Splitting - Splitting Rule Logic– Determines which item categories will be split as well as

which base can be used for splitting• E.g., the Customer Invoices Business Transaction (0200) with BTV

(0001) will be split along with Taxes on Sales/Purchases items bases on item categories 01000, 01100, 07000, 2000, 30000

Page 119: SAP FI-AA (Asset Accounting)

Key Customizing Steps

123

• Document Splitting - Key Customizing Steps– Classify GL Accounts for Document Splitting– Classify Document Types for Document Splitting– Define a Zero-Balance Clearing Account– Define Document Splitting Characteristics for General

Ledger Accounting– Define Document Splitting Characteristics for

Controlling– Define Post-Capitalization of Cash Discount to Assets– Edit Constants for Non-assigned Processes– Activate Document Splitting– Define You Own Splitting Rules (Optional)

Page 120: SAP FI-AA (Asset Accounting)

Classify GL Accounts for Document Splitting

124

• Classify the GL accounts that are linked to the item category for Document Splitting

Page 121: SAP FI-AA (Asset Accounting)

Classify Document Types for Document Splitting (1 of 3)

125

• Add your customer created document types

Page 122: SAP FI-AA (Asset Accounting)

Classify Document Types for Document Splitting (2 of 3)

: Customizing menu path: Financial Accounting (New) > General Ledger Accounting > (New) > Business Transactions > Document Splitting > Classify Document Types for Document Splitting

: All documents that are posted must refer to a combination of business transaction and transaction variant. The transaction variant controls the processing in the document split

: Some transactions are automatically assigned within the program to a combination of business transaction and variant (Clearing case: FB1D, FB1K, FB1S, FBRA), because these always proceed in the same way (internal Customizing table V_T8G10/SM30). In these cases, certain processes are used for the split (business transactions: 1010 and 1020)

126

Page 123: SAP FI-AA (Asset Accounting)

Classify Document Types for Document Splitting (3 of 3)

: Consultant: Derivation via the transaction assumes that the processing of the respective transaction with respect to the business transaction is always identical (Examples: Transaction MIRO as an alternative to the hereby entry RE..., transaction MR11… or negative example: FB50, FB01 etc…)

: For all further postings that are also actually carried out in the system, all possible document types must be assigned business transaction and variant! That is, assignments that are not stored here cause an error message for the respective posting.

: Attention: Through this control (processing in the document split), the significance of the document type is increased considerably in comparison to its use previously

127

Page 124: SAP FI-AA (Asset Accounting)

Define a Zero Balance Clearing Account

128

• For account assignment objects for which you want to have a zero balance setting, the system checks whether the balance of account assignment object is zero after document splitting.• If this is not the case, the system generates additional clearing items for which we create a clearing account for these additional clearing items

Page 125: SAP FI-AA (Asset Accounting)

Define Document Splitting Characteristics for GL Accounting (1 of 3)

129

• Define the characteristics for which document splitting is required for GL accounting

Page 126: SAP FI-AA (Asset Accounting)

Define Document Splitting Characteristics for GL Accounting (2 of 3)

: Customizing menu path: Financial Accounting (New) > General Ledger Accounting (new) > Business Transactions > Document Splitting > Define Document Splitting Characteristics for General Ledgers

: This setting provides the characteristics that have been created as a scenario by SAP and as customer fields

: “Zero balance” switch: If the indicator is set, the system checks while posting whether the balance is zero for the characteristic. If this is not the case, then the system creates in the document additional clearing lines on clearing accounts that produce the zero balance. This setting generally makes sense if balance reporting is to be carried out on this characteristic

130

Page 127: SAP FI-AA (Asset Accounting)

Define Document Splitting Characteristics for GL Accounting (3 of 3)

: “Mandatory Field” switch: If the indicator is set, then all postings for which no value is set after the document split for the specified field are rejected by an error message. (Emergency switch, if postings do not go through and should definitely take place, despite this. Attention, in this case a complete balance on the respective dimension is at risk)

131

Page 128: SAP FI-AA (Asset Accounting)

Define Document Splitting Characteristics for Controlling

132

Page 129: SAP FI-AA (Asset Accounting)

Define Post-Capitalization of Cash Discount to Assets

133

Page 130: SAP FI-AA (Asset Accounting)

Edit Constants for Non-Assigned Processes

134

Page 131: SAP FI-AA (Asset Accounting)

Activate Document Splitting

135

Page 132: SAP FI-AA (Asset Accounting)

Define Your Own Splitting Rules

136

• Do not change SAP-delivered rules• If you want to extend the splitting rules, copy them to your own

rules (Note: You need to define your own splitting method first)• Tip: The split is not rule-based in case of clearing and if a zero

balance is generated. The split is always performed for these processes

Page 133: SAP FI-AA (Asset Accounting)

Extended Document Splitting – Document Splitting Rule

137

• Extended Document Splitting

Page 134: SAP FI-AA (Asset Accounting)

Example – Online Document Splitting Results in Two Ways to View a Document

: The entry view of a document shows the base journal input

: The GL View shows the additional splits generated by the system. This is sometimes called Enhanced or Enriched

139

Entry View

Page 135: SAP FI-AA (Asset Accounting)

Example – Document Entry View of Documents Show the Traditional Journal Entry Lines

140

Page 136: SAP FI-AA (Asset Accounting)

Example – GL Views of Documents Show Online Splits

141

Page 137: SAP FI-AA (Asset Accounting)

Example – Zero Balancing Splitting

142

• Document Splitting Simulation with Zero Balancing Example• This is a great feature that is available with SAP ECC 6.0

Page 138: SAP FI-AA (Asset Accounting)

Example – Zero Balancing Splitting (cont.)

143

• Document Splitting Simulation with Zero Balancing Example (cont.)

Page 139: SAP FI-AA (Asset Accounting)

Recommendations

: Document Splitting and Zero Balancing: Define your splitting characteristics

: I.e., characteristics that will be used to produce your B/S and P&L

: Define profit centre and segment as splitting characteristics: Zero balancing characteristics

: Make sure that you select this option for your splitting characteristics

: Doing so will make sure that zero balance is secured in each document

: Mandatory characteristics: Make sure that you select this option for your splitting

characteristics: Doing so will make sure that the selected characteristics are

populated in each document line

144

Page 140: SAP FI-AA (Asset Accounting)

Recommendations (cont.)

145

• Use splitting and zero balancing functionalities to enable line items to be divided for selected characteristics to produce financial statements for the selected characteristics

– These functionalities are available for segment, profit centre and business area

• Make sure that you select zero balancing and the mandatory option for your splitting characteristics. By doing so, you will make sure that a characteristic is populated for each line and zero balance per characteristic is secured in each document

• The extended data structure of new GL is available for standard reporting

Page 141: SAP FI-AA (Asset Accounting)

Visibility of Online Document Splitting – Important!

: Document splitting is only visible in the General Ledger

: The sub-ledgers only contain the Entry View of the document

146

Page 142: SAP FI-AA (Asset Accounting)

Company Code Global Parameters

: Enter Company Code Global Parameters (OBY6)

147

IMG Path: Financial Accounting>Financial Accounting Global Settings>Company Code>Enter Global Parameter

Country & Currency

Chart of Accounts

Fiscal year variant

Field status variant & Posting period variant

Page 143: SAP FI-AA (Asset Accounting)

Knowledge Check1. What is the highest level of organisation in

Asset Accounting?2. Why are multiple depreciation areas setup?3. What are some of the instances for making

mass changes to asset master records?4. What are the three types of asset

retirement?5. What does the document splitting rule logic

determine?

148

Page 144: SAP FI-AA (Asset Accounting)

End of Day Q & A

149

Page 145: SAP FI-AA (Asset Accounting)

Day 4 Lessons Learned (1 of 4)

: Organisation Structure: Chart of depreciation

: Directory of depreciation areas

: Highest organisation unit in asset accounting

: Depreciation Area: Facilitates valuation of assets

: One depreciation area for each method of accounting

: Facilitates parallel accounting

: Controls postings to GL (Real time, periodic, no postings, etc.)

150

Page 146: SAP FI-AA (Asset Accounting)

Day 4 Lessons Learned (2 of 4)

: Organisation Structure: Asset Class

: Classification of assets

: Controls screen layout for asset masters

: Account determination

: Asset Master number ranges

: Activation of asset class for depreciation area

: Default values for assets (depreciation terms)

: Depreciation Key: Calculation Methods

: Set as default in asset class151

Page 147: SAP FI-AA (Asset Accounting)

Day 4 Lessons Learned (3 of 4)

: Master Data: Creation of asset masters: Mass change of assets: Legacy data transfer

: Business Transactions: Transaction type: Document Types: Acquisitions, Retirements and Transfers: Segment Reporting

: Activation of Account Assignment Objects: Segment Derivation and posting

152

Page 148: SAP FI-AA (Asset Accounting)

Day 4 Lessons Learned (4 of 4)

: Period End/Year End transactions: Depreciation Run

: AuC Settlement: 2 types of settlements

: Use of line settlement and settlement profile

: Fiscal Year Change and Fiscal Year close – Need and differences

: Reports

: New GL Online Document Splitting153