Sandblasting Techniques - · PDF fileSandstrahltechnik_2006_E.fh 15.09.2006 14:33 Uhr Seite 5...

Sandstrahltechnik_2006_E.fh 15.09.2006 14:33 Uhr Seite 1

Probedruck

C M Y CM MY CY CMY K

Sandblasting Techniques

Yellow Line

mobile &

economical

37b/06


Probedruck


Technical Data

Service Pressure 3 barPneumatic requirementsabout 1000 litres. (with 5 mm nozzle)Blasting nozzle 5 mm special nozzleBlasting depth max. 10 mm (with 5 mm nozzle)Radiant type boiler about 60 LitresVacuum cleaner 380 V three phase turbine – 3 kWGrooved filter material/ filter cartridge about 7 m2

Code no. 7183334

Height 2100 mm Length 1230 mmWidth 650 mm Weight 190 kg

Blasting material Corundum 40 (25 kg) Code no. 6261101

Dust Free Chasing Tool Machine for deep blastingof Scriptures and Ornaments on Stone surfaces.

By means of the dust free method of operationyou will be contributing to an important aspectof employee health care in your Company. (Sili-cosis Hazard).

An integrated cyclone dust collector providesitself with an effective dust separation (about90% preliminary dust separation) from theblasting material. That means a significant costreduction for blasting material!

Since the equipment can be easily moved; it canbe transported to the work place location forsand blasting processing.

reduced blasting shot consumption by meansof a closed circulationhigh output performance by-pass channelcompressor, suitable for continuous dutyeasily understandable display field for thepower supply pressure, blasting pressure,under pressure for suction removalquick relief valveno voltage tripping devicesafety switch24 -Volt– protective voltage

Equipmentpneumatic / filter cleansersand blast corundum salvagercompletely mobile with 4 hard rubber rollersØ 125 mmemergency-off switch

extremely silent, by-pass channel compressoras suction removal turbine


2

HurricanePressure Blaster


Probedruck


Technical Data

Service Pressure 3 barPneumatic requirementsabout 500 liters. (with 4 mm nozzle)*Blasting nozzle 4 mm special nozzleBlasting depth max. 8 mm (with 4 mm nozzle)Radiant type boiler about 60 LitresVacuum cleaner 230 /1450 W / 50 / 60 HzCode no. 7183332

Height 1850 mmWidth 650 mmLength 1000 mmWidth 80 kg


* 5 mm Tetraboric nozzle available at extra charge (pneumatic requirements about 1000 litres)


3

OberonPressure Blaster

Dust Free Chasing Tool Machine for deep blastingof Scriptures and Ornaments on Stone surfaces.

By means of the dust free method of operationyou will be contributing to an important aspectof employee health care in your Company.(Silicosis Hazard).

Outfitted with an additional cyclone dust sepa-rator provides itself with an effective dust sepa-ration (about 90% preliminary dust separation)from the blasting material. That means a signi-ficant cost reduction for blasting material!


reduced blasting shot consumption by meansof a closed circulationquick relief valvesand blast corundum-salvagetransportable on pneumatic tyressuitable for the application on the sand blastmachine Optima (see Page 4-5)larger pressure chamber (as opposed to the Product Titan)application with 5 mm blasting nozzle is possible against extra charge

Illustration:Sand Blasting Machine Oberonwith cyclone separator


Probedruck


The Multiple Task Automaticpermits definitions up to 19fields in different sizes. Everyfield can be individually adjus-ted for the measurements aswell as the blasting depths.The compilation of the blas-ting fields is accomplished viaa simple programming. Twocorner points in each fieldmust be tracked. This Multiple

Task Automatic permits pro-cessing numerous fields on atomb monument with diffe-rent blast depths. Upon com-pletion of the blastingprocessing the machine willswitch off automatically. Thismeans that also during thenight, blasting work can beachieved.

Optional Multiple Task Automatic(with Touch-Screen)


4

Illu

stra

tio

n: T

ou

ch-S

cree

n-P

anel

Acc

ess

ori

es


Probedruck


Do it yourself Sand blasting? Simply blast onthe easy way! Hurricane and Oberon.

The Sand Blasting Bridge Optima from A genuine time and money saver! The automaticcontrol provides a perfect, absolute uniformblasting image whereby your head and handsare free for other important work. Simply econo-mically un-paralleled!Initially the sand blasting head of a dust freesand blasting unit will be clamped into theholding device. Then the Stone which will beinscribed will be covered by a foil (sand blastingfoil) and positioned under the sand blastingbridge machine. After having the letter sizealready adjusted by the end-switch the Machinewill automatically drive over the blasted surface.In the meantime e.g. one can devote time toprepare a new Stone!!

Completely automatically controlledAbsolute uniform blasting imageManual or automatic operationRetrofitting connection is possible fromavailable blasting devices without expensivedisassemblyPre-select counter timer for surface blastingInterval automatic for pressure blasterUniversal re-fitting for all blasting devicesIntegrated in the pressure sand blasting unitis a time controlled switch-off for maintainingthe pause cycles. The desired processing surfaceis adjusted via a LCD-DisplayThe border definition of the blast surface viaan adjustable end-switchHeight adjustment 270 mmBlasting surface 1200 x 860 mm


5

Our professional writingconfiguration software offersyou the highest comfort inapplication. Trace yourcreative designs ofinscriptions, tomb-stone monumentsand ornaments.Convince your cus-tomers throughthe means of

premium quality pre-con-figurations and shorten theprocessing period by scaledrawing printouts of the

compositions.

Engraving Planner with Software

OptimaSand Blasting Machine

Do you have any questions regarding En-graving Software? Mr. Kober will be pleasedto assist you!

Michael Kober

Telephone: +49.8231.6007-128

Fax: +49.8231.6007-148

E-mail: [email protected]

Engraving Software

Sand Blasting Machine Optima Code no. 7183316

Sand Blasting Machine Optimawith optional Multiple Task Automatic Code no. 7183317


Probedruck


Design with optionalcyclone separator

Technical Data

Service Pressure about 3 barPneumatic requirements about 500 litres. (with 4 mm nozzle)Blasting nozzle 4 mm special nozzleBlasting depth max. 8 mm (with 4 mm nozzle)Radiant type boiler about 16 LitresVacuum cleaner 230 V/ 1450 W/50/60 HzCode no. 7183351

Height 1400 mmWidth 650 mmLength 950 mmWeight 75 kg

Blasting abrasive Corundum 40 (25 kg) Code no. 6261101

Dust free Pressure blasting device for deepblasting of Inscriptions and Ornaments in Stone.

By means of the dust free method of operationyou will be contributing to an important aspectof employee health care in your Company.(Silicosis Hazard).

An additional cyclone dust separator (availableagainst extra charge) privides itself with aneffective dust separation (about 90% preliminarydust separation) from the blasting material. Thatmeans a significant cost reduction for blastingmaterial!


reduced blasting shot consumption by meansof a closed circulationquick relief valvesandblast Corundum-salvagermaneuverable on pneumatic tyresideally suitable for the transportableapplication

optional – suitable for after-printing at the cemetery in combination with the transportable Compressor


6

TitanPressure Blaster


Probedruck


Technical Data

Pneumatic pressure 5 - 10 barAir consumptionabout 350 - 600 l/min. (according to Ø of the nozzle)Air nozzle3 mm Ø (consumption at 4 bar = ca. 370 l/min)Blasting nozzle 7 mm ØVacuum cleaner230 V/1450 W/50/60 Hz/5,7 AInclusive of electric cable with connector plugCode no. 7183339

Diameter 400 mmHeight 1420 mmWeight 25 kg



7

Dust free sand blasting machine for blowingfrom inscriptions and ornaments in stone aswell as shot blasting from smaller surfaces.

The Sand Blasting Machine Kallisto is a mobileunit, working on the recirculation basis, none-theless with an integrated dust recycling. Onecan work continuously since the blasting materialis automatically re-circulated in the sand blastingmaterial container.

The blasting head works according to the in-jection principle (Corundum will be mixed shortlyat the nozzle – No pressure tank required) andwill be aimed with a nylon brush thereby sealingthe work piece.

One can utilize Corundum, slag, glass beads orsynthetic granular pellets.For blasting of Stone we recommend uncon-ditionally Corundum 40 !

reduced air consumptionno silicosis hazardideal for continuous dutymaneuverable, universal assignmentsWork pieces can be processed right on location

KallistoSand Blast / Injection Machine


Probedruck


Gigant

maneuverable, universal application

• Work Pieces can be processedright on locationBlasting material hoseabout 3 mSpecial Nozzle 3 mm ØCondensed water separatorAir requirements about 270 l(with 3 mm Blasting nozzle)Blasting head with safety switch (remote release)

Code no. VD070787Building height 1260 mmRadiant type boiler 60 lDiameter 550 mm

Weight 38 kg

Mars

maneuverable, universal applicationWork Pieces can be processedright on locationBlasting material hoseabout 3 mSpecial Nozzle 3 mm ØCondensed water separatorAir requirements about 270 l(with 3 mm Blasting nozzle)Blasting head with safety switch (remote release)

Code no. VD070760Building height 1000 mmRadiant type boiler 13 lDiameter 420 mmWeight 25 kg

Open Jet Blasting DevicesFor cleansing of Facades, Memorials, Structures and Building Renovation

Recommended Blasting Material

BlowingCorundum K40Premium-Quality25 kg SackCode no. 6261101

Sandblasting Techniques All Specifications are approximate • Errors and Technical Alterations under reserve

8

WEHA Ludwig Werwein GmbHPostfach 135586331 KönigsbrunnGERMANYTel. +49.8231.6007-0Fax +49.8231.6007-132E-Mail: [email protected]://www.weha.com

Info-HotlineMr. KochTelephone: +49.8231.6007-115

Mr. KoberTelephone: +49.8231.6007-128

SteinbearbeitungsmaschinenVertriebsgesellschaft m.b.H.Lange Gasse 17 • 1080 WienAUSTRIATel. +43.1.4039340Fax +43.1.4088762mail: [email protected]

Neuheimstrasse 12Postfach 5178853 LachenSWITZERLANDTel. +41.55.4510600Fax +41.55.4510606E-mail: [email protected]://www.revema.ch

Sandblasting Techniques - · PDF fileSandstrahltechnik_2006_E.fh 15.09.2006 14:33 Uhr Seite 5...

Documents

Transcript of Sandblasting Techniques - · PDF fileSandstrahltechnik_2006_E.fh 15.09.2006 14:33 Uhr Seite 5...