Samsung s16d Tomorrow Chassis Cw21z413ncxxec

■■ SLIM FIT CRT

■ Multi Wide System

■■ LNA Plus(Low Noise Amplifier)

■ Turbo Plus

■■ Low Stand-By Power Wattage

■■ SOUND Equalizer

■ 1-Tuner PIP(option)

CW-21Z413N

This Service Manual is a property of Samsung Electronics Co.,Ltd.Any unauthorized use of Manual can be punished under applicableInternational and/or domestic law.

© Samsung Electronics Co., Ltd. Oct. 2006Printed in KoreaAA82-04219A

Table of Contents

Chapter 1 Precaution■ 1-1 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1■ 1-2 Servicing Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 ■ 1-3 Static Electricity Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4■ 1-4 Installation Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5

Chapter 2 Product Specification■ 2-1 Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1■ 2-2 Key Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2■ 2-3 Specifications Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3■ 2-4 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

Chapter 3 Alignment & Adjustment■ 3-1 Service Instruction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1■ 3-2 How to Access Service Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2■ 3-3 Factory Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3■ 3-4 Service Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9■ 3-5 Software Upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11■ 3-6 Replacements & Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-15

Chapter 4 Exploded View & Part List■ 4-1 CW21Z413NCXXEC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

Chapter 5 Electrical Part List■ 5-1 CW21Z413NCXXEC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

Chapter 6 Troubleshooting■ 6-1 Checkpoints by Error Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1■ 6-2 Trouble-shooting with New Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3■ 6-3 Troubleshooting Procedures by Error Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6

Chapter 7 Block Diagram■ 7-1 Overall Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1■ 7-2 Partial Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2

Chapter 8 Wiring Diagram■ 8-1 Overall Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1■ 8-2 Pin Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2

Chapter 9 PCB Diagram■ 9-1 Main Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1■ 9-2 CRT Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-3

Chapter 10 Schematic Diagram■ 10-1 MAIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1■ 10-2 POWER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-2■ 10-3 SOUND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-3■ 10-4 CRT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-4

Chapter 11 Operation Instruction & Installation■ 11-1 Product Features and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-1

Chapter 12 Disassembly & Reassembly■ 12-1 Overhaul Disassembly & Reassembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-1

Chapter 13 Circuit Description■ 13-1 Circuit Key Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-1

Chapter 14 Reference Information■ 14-1 Other issues related to other products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-1■ 14-2 Technical Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-3

Product Specification

Samsung Electronics 2-1

2. Product Specification2-1 Product Features

Block Specfication Core Parts Remark

CRT 21" SLIM FIT CRT SLIM FIT CRT

RF Part LNA F/S TUNER TDQ-6L/125S, LNA

Power WORLD WIDE INPUT VOLTAGE RANGE STR-W6750F

Video - MULTI SYSTEM(NT/PAL/SECAM) - 4H Comb Filter TDA12025PQ/N1F80

Audio

- Output : 10W X2 - Function : NICAM/A2 STEREO,

PSEUDO STEREO, TURBO PLUS

TDA12025PQ/N1F80TDA7297SA

Cabinet 21" CABINET

Other- BASIC MODEL : CS-21Z40ZQ - UOC3 with a built-in MSP- TURBO→TURBO PLUS

■ Core Parts Functions- TDA12025PQ : Video/Sound Processing1 x MICOM

- STR-W6750F : SMPS Power STR- TDA7297SA : 5W ~ 15W Sound Output BTL AMP- 24C16 : 16K EEPROM- LA7845 : Vertical Deflection AMP- C5936 : H-OUT S/W TR- TDQ-6L : F/S PAL Tuner(LNA Option)- TDA6108AJF : R/G/B Drive AMP IC- Flyback Trans : BSC29-0156G(11P,27KV)


2-2 Samsung Electronics

2-2 Key Features

Country EU CIS ASIA

COLORdemodulation

PAL-BG / DK/ INT4.43, SECAM-L / L'

PAL-BG / DK / INTSC-M (CS SYSTEM)

PAL-BG / DK / INTSC-M (CS SYSTEM)

Sound receving way QSS (Quasi Split) QSS (Quasi Split) QSS (Quasi Split)

Sound demodulation INTER CARRIER (Virtual Dolby / Nicam / A2 Stereo)

Antemma 75ohm Din-Jack

Channel search F/S

Channel numbers AIR (100Ch)

Input voltage AC 220V ~ 240V AC 160V - 300V AC 220V ~ 240V

Power system STR-W6750F

Power insulation SMPS / COLD

receving(P/G) CH

VHF LOW : 2 ~ 4 VHF HIGH : 5 ~ 12

UHF : 21 ~ 69CATV : S1 ~ 41,X,Y,Z,Z+1,Z+2

Character

TTXMelody on/offTurbo SoundAuto VolumePre-Ch'LNA+ (Option)Led : Green

TTX, LNA+Melody on/offTurbo SoundAuto VolumePre-Ch'LNA+ (Option)Led : Green

TTXMelody on/offTurbo SoundAuto VolumePre-Ch'LNA+ (Option)Led : Green

■ Feature- AKB(Auto Kinetic Bais)- Comb Filter : 4H Comb Filter- Picture Size : 4:3- NICAM / STEREO / Line-STEREO- Auto STEREO, Sound Equalizer, Auto Mute, Auto Volume Limit, PSEUDO STEREO, TURBO PLUS- Composite (RCA A/V,DVD)- Rear : 42P Scart Input/Output (Scart1 R/G/B Input)- Front or Side A/V Input (Side A/V Preferability), Headphone



2-3 Specifications AnalysisModel CW21A113N CW-21Z413N

Chassis KS7A S16D

Design

Basic

Product Type FLAT CRT SLIM CRTDigital Display - -Screen Size 21 21Aspect Ratio 4:3 4:3

SystemBroadcasting System PAL/SECAM/NT PAL/SECAM/NT

Tuner Programmable F/S Programmable F/S CH Memory 100CH 100CH

PowerSupply 230V 230V

Stand-by 3W 5WPicture ON Master S/W Master S/W

Picture

4H Comb-Filter O O SCAN 50HZ 50HZ

Sharpness O O CTI O XVM X XAKB O O

P.STD O O PIP X 1T (Option)

Digital NR O O Color Tone(W/B) O O

Black Level Expantion O O Screen Mode 5 Mode 5 Mode

Sound

SPK System A11 Semi Dome/Direct Semi Dome/Direct Sound Output Power(Max) 5W + 5W 10W + 10W

MDB X X Virtual Dolby X X

MSE X XMelody O O

Turbo Sound O O A2 Stereo A2 or Nicam A2 or Nicam

Auto Stereo O O AVL O O

Equalizer O O

Jack

Front/Side AV Jack O O PC Input(VGA) X X

Scart Jack 2Scart 2Scart Back A/V Monitor Out O O

S-VHS Jack(Front only) O X Head/Earphone Jack O O

Common Interface O O Service Port X X

Accessory

I/B O O Normal Remocon O O

Battery O O Matching Trans O X

Rod ANT O X



2-4 Accessories Accessories Item Item code Remark

Supp

liedA

cces

sorie

s

Remote Control Batteries

AA59-00399A4301-000121

Samsung Service centerOwner's Instructions -

Warranty Card -

Acce

ssor

iestha

tcan

bepu

rchas

edad

dition

ally

RF Cable -

Internet shopping mall

Video Cable Audio Cable -

S-VIDEO Cable -

Component Cable(RCA) -

Alignment & Adjustment


3. Alignment & Adjustment3-1 Service Instruction 1. General Adjustment :

In general, a color TV can provide ideal visual quality by adjusting the basic settings such as the vertical size, horizontal size, focus, etc.Display a black and white picture on the screen to check if the picture is clearly displayed.If there are some 'spotted' points on the screen when displaying a black and white picture, degauss the screen using the degauss coil. If the spotted points remain, re-adjust the purity and the convergence.This completes the basic performance examination.

Notice.■ These adjustments and the check list are only applied to S16D chassis-applied models.■ Only use 230V for the measurement set. It is recommended using an insulation transformer when supplying power to

the set so as to prevent shock to the set or to yourself.■ These adjustment specifications have been created on the basis of the domestic S16D chassis-applied remote control

model. Some of the contents may be changed subject to the sales location and the product specifications.

※When replacing the Module Service Instruction

1. When replacing the MAIN Board : Tilt adjustment, Focus adjustment, Screen voltage, W/B adjustment are all required. Since the settings including the Channel information,Deflection, etc. are saved to the EEPROM,recogfigure these settings when replacing the MAIN Board.

The notation of the software information : T-HITPEU-1000 refer to "HITCH BASIC MODEL EUROPE.ver.1000"Since the settings including the Channel information, Deflection, etc. aresaved to the EEPROM, recogfigure these settings when replacing the MAIN Board.

2. When replacing the CRT Ass'y : No adjustments required

3. When replacing the front panel Master Power switch : No adjustments required

4. When replacing the Side AV Ass'y : No adjustments required

5. When replacing the PIP Module : No adjustments required

6. When replacing the Control Ass'y : No adjustments required

7. When replacing the PFC Ass'y : No adjustments required

1. To enter Service Mode, press the keys on the remote control according to the following sequence. (in Stand-by status)

Info → Menu → Mute → Power On

※ When failing to enter Service Mode, repeat the procedure above.

2. The initial screen of Service Mode.

3. Functions of the Keys within Service Mode.

4. W/B Setting



3-2 How to Access Service Mode

MENU Show all menus▲ / ▼ Move the cursor to select an item.◀ / ▶ Adjust the selected configuration value

Option1 XX XX XX XX XX Option2 DeflectionWSS DeflectionVideo Adjust1Video Adjust2Video Adjust3Video Adjust4Video Adjust5YC DelayOthersBus Stop OffCHECKSUM 0000G2 AdjustRESETT-HITPEU-1000 2005/0X/XX

No Item Data Required Adjustment

1 WhiteBalance

x:286± 3 y:290± 3 Y:40± 3x:286± 3 y:290± 3 Y:2.0± .3 White Balance (Standard Data)

2 Screen Voltage Toshiba Pattern G2 Adjust Same as S16A Basic Model



3-3 Factory Data

CIS21"/SLIM-CRTNon-PIP/LNA

South East Asia21"/SLIM-CRT

Non-PIP/Non-LNARemark

Option11.Video Mute 900msec 900msec2.System CS CS3.AV Jack 2SCART 2RCA+DVD By MODEL4.CRT 4:3 Zoom 4:3 Zoom5.Sound NICAM NICAM6.Volume Curve Large Large7.Initial Lang. Russia By Country TSE,SDMA,SAVINA,SEIN8.TTX Osd Language Osd Language MQ:osd, MN/MA:OFF9.TTX Flof/List Flof Flof10.Tilt Off Off11.LNA On Off12.DNIe JR Off Off13.Hotel Mode Off Off14.PIP Off Off By MODEL

1. Option1

2. Option2

CIS21"/SLIM-CRTNon-PIP/LNA

South East Asia21"/SLIM-CRT

Non-PIP/Non-LNARemark

Option21.X-Ray Protect Off Off2.HighDeviation Off Off3.V-Guard On On4.Sound Carrier Mute Off Off5.Speaker 10W 10W By MODEL6.PIP Device SDA9488 SDA94887.ZOOM Off Off



3. Deflection

No Item Adjust CIS S-Asia Remark

1 V Amp Adjust 32 322 V Shift Adjust 32 323 H EW Adjust 32 324 H Shift Adjust 32 325 V Linearity FIX 36 366 V S-Correction FIX 30 307 V Slope FIX 30 308 V Scroll FIX 34 349 V Zoom FIX 48 48

10 H Parabola Adjust 32 3211 Upper Corner Adjust 32 3212 Lower Corner Adjust 32 3213 H Trapezium Adjust 32 3214 Bow Adjust 32 3215 Angle Adjust 32 32

4. WSS Deflection

No Item Adjust CIS S-Asia Remark

1 16:9 V Amp Adjust 10 102 16:9 V Shift Adjust 12 123 16:9 H Parabola Adjust 2 24 16:9 H Trapezium Adjust -12 -125 14:9 V Amp Adjust -1 -16 14:9 V Shift Adjust -4 -47 14:9 H Parabola Adjust -2 -28 14:9 H Trapezium Adjust 2 29 VM Mode FIX 1 1

10 VM Gain FIX 1 111 VM Delay FIX 5 512 Preset Gain R FIX 20 2013 Preset Gain G FIX 20 2014 Preset Gain B FIX 20 2015 Blue Screen HS Of FIX 6 6



5. Video Adjust 1~5

＊Video Adjust 1No Item Adjust CIS S-Asia Remark1 R Cutoff Adjust 32 322 B Cutoff Adjust 32 323 R Drive Adjust 32 324 G Drive FIX 32 325 B Drive Adjust 32 326 Sub Bright Adjust 10 107 Sub Contrast Adjust 10 108 G2 Adjust Bright FIX 42 42 IC501:TDA6108AJF9 AKB Option FIX 0 0

10 Cathode Drive Level FIX 6 6 IC501:TDA6108AJF11 TTX Bright FIX 10 1012 TTX RGB Bright FIX 15 1513 TTX Position FIX 11 1114 Turbo Center Frequency FIX 2 215 Threshold Sound1 Carrier FIX 25 25

＊Video Adjust 2No Item Adjust CIS S-Asia Remark1 Melody Volume FIX 35 352 PAL/SECAM Sub Color Fix 12 12 LNA/N-LNA3 NTSC Sub Color FIX 10 104 NTSC Sub Tint FIX 12 125 YUV Sub Tint RF FIX 32 326 YUV Sub Tint AV FIX 32 327 YUV Sub Tint RGB FIX 32 328 Blue Stretch FIX 1 19 Soft Clipping Level FIX 0 0

10 Peak White Limit FIX 15 1511 SECAM B-Y Offset FIX 1 112 Peakng CF0 & Delay Mode FIX 2 213 Sub Sharpness-RF FIX 23 2314 Video Dependent Coring RF FIX 1 115 Video Dependent Coring AV FIX 0 0



＊Video Adjust 3No Item Adjust CIS S-Asia Remark1 PIP Contrast Opt/Fix 8 8 PIP Only2 PIP Bright Opt/Fix 6 6 PIP Only3 PIP Tint Opt/Fix 64 64 PIP Only4 PIP Color Opt/Fix 12 12 PIP Only5 PIP YC Delay Opt/Fix 6 6 PIP Only6 PIP PAL V. Pos Opt/Fix 0 0 PIP Only7 PIP NTSC V. pos Opt/Fix 7 7 PIP Only8 PIP H. Pos Opt/Fix 2 2 PIP Only9 PIP R Cutoff Opt/Fix 10 10 PIP Only

10 PIP G Cutoff Opt/Fix 10 10 PIP Only11 PIP B Cutoff Opt/Fix 10 10 PIP Only12 PIP R Drive Opt/Fix 90 90 PIP Only13 PIP G Drive Opt/Fix 90 90 PIP Only14 PIP B Drive Opt/Fix 90 90 PIP Only

＊Video Adjust 4No Item Adjust CIS S-Asia Remark1 IF Preset Value 1 FIX 32 32 2 IF Preset Value 2 FIX 32 32 3 IF PLL Osc Preset Value FIX 0 0 4 DCXO Caps/NICAM Center FIX 59 59 5 DCXO Scaling Control Gain FIX 3 3 6 RF AGC FIX 28 28 7 IF AGC Speed FIX 1 1 8 IF Demodulator FIX 38 38 9 Fast Filter IF PLL FIX 0 0

10 Wide Blanking Front FIX 15 15 Wide Only11 Wide Blanking Rear FIX 15 15 Wide Only12 PIP AGC Mode FIX 1 1 PIP Only13 RF FOA/FOB FIX 1 1 ALL MODEL14 RF PA/NT Ident Sensitivit FIX 1 1 ALL MODEL

＊Video Adjust 5No Item Adjust CIS S-Asia Remark1 Bypass of Chroma Base Band FIX 0 0 2 Fixed Beam Current FIX 0 0 3 Fixed Beam Current1 FIX 0 0 4 Forced Colour On FIX 0 0 5 Sync Performance Trick Mode FIX 0 0 6 Beam Current Limiting FIX 0 0 7 Comb Filter FIX 0 0 8 RGB Comb Filter FIX 1 1 9 Chroma Trap Mode FIX 0 0

10 EHT Tracking Mode FIX 1 1 11 AV FOA/FOB FIX 0 0



6. YC DelayNo Item Adjust CIS S-Asia Remark1 PAL Delay FIX 12 12 2 SECAM Delay FIX 12 12 3 NTSC Delay FIX 12 12 4 PAL AV Delay FIX 12 12 5 SECAM AV Delay FIX 12 12 6 NTSC AV Delay FIX 12 12

7. OthersNo Item Adjust CIS S-Asia Remark1 Service Blanking FIX 0 0 2 High Current Level FIX 1 1 3 Black Area FIX 2 2 4 Black Stretch FIX 1 1 5 OSD Brightness FIX 15 15 6 PWL Active FIX 1 1 7 Bypass Peaking Delay FIX 0 0 8 Ratio Pre & After Shoot FIX 0 0 9 Ratio posi & Nega Peaks FIX 0 0

10 Dynamic Skin Control FIX 0 0 11 Gamma & White Stretch FIX 0 0 DNIE JR12 Comb Filter Diode Clamp FIX 1 1 13 DC Transfer Ratio FIX 1 1 14 NTSC Matrix FIX 0 0

WHITE BALANCECIS S-Asia Remark

H 286/290 40FL 265/265 45FLL 286/290 2.0FL 265/265 2.5FL



3-4 Service Adjustment3-4-1 Adjusting the Picture Size

■ Since the S16D chassis has the deflection settings data within the Factory Data, the picture size has to be adjusted when replacing the Main Board or the VCTi Module, according to the following procedures.

① Display the Lion pattern. ② Press "Power Off →Info → Menu → Mute → Power On" using the remote control and enter Factory Mode.

92

92

9292

③ Enter Deflection Mode. ④ Adjust the V-AMP, V-SHIFT, H-AMP and H-SHIFT items so that the width becomes 5 and the height becomes 4.



3-4-2 Adjusting the Picture Straight Lines

① Display the Cross Hatch pattern.

② Adjust settings other than V-AMP, V-SHIFT, H-AMP and H-SHIFT so that straight lines are displayed without curves.

⑦ When the adjustments are complete, display the Lion pattern and check that the picture size has not been changed.If there is no change, finish the adjustments.

③ Adjust BOW and the Angle settings so that the center linebecomes a straight line.

④ Adjust the H-Parabola and H-Trapezium settings so that the left and right lines become straight.

⑤ Adjust the Upper Corner and the Low Corner settings so thatthe end of the lines become straight.

⑥ Adjust the V-Linearity and V-SC settings so that theintervals of the horizontal lines become uniform.



3-5 Software Upgrade3-5-1 Checking the Version of the Software (Analog SW)

1. To enter Service Mode, press the keys on the remote control according to the following sequence. (in Stand-by status)Info → Menu → Mute → Power On

2. When entering Service mode, the software information is displayed at the top of the service mode menu OSD.ex) T-HITPEU-1000 2005/0X/XX



3-5-2 Service Download Procedure1. Double click the your desktop “WISP” icon.

2. Check the standard- Check the appoint “Picasso N2”

- Check the “Flash selection” item is appoint “Manual”- You can adjust program delay time for program speed

but we use the normal “5[ms]”- Check the green lamp if this is sometime red lamp you can not programming



3. Check the IIC line- Click the “Enter ISP Mode” button For IIC bus line problem or not- Change the “Press Send to enter ISP Mode”- Click the “Send” button

4. Erase before program- Click the “Erase Flash” button for before program erase- You can select flash selection item but we use normal “All” mode- Change the “Select flash ROM to erase. When ready press Send.”- Click the “Send” button



5. Write new program- Click the “Write Flash” button for new program download- Change the “Load.hex file to program flashes.”- Click the “Browse” button and find the new program folder in your computer- Click the “Send” button

6. Verify new program- Click the “Verify Flash” button- Change the “Select flash to verify correct programming.

When ready press Send.”- Click the “Send” button



3-6 Replacements & Calibration3-6-1 Adjusting the Focus

■ Since the S59B chassis has a built-in single focus circuit, take care when adjusting the focus. When the CRT PCB, FBT or CRT has been replaced, the focus has to be adjusted according to the following procedures.

1. Display the CROSS Hatch pattern.

2. Set the Screen Adjustment to "View as Standard".

3. Turn the Static Focus VR clockwise to the maximum position.(End of clockwise direction)

4. Slowly turn the Static Focus VR counter clockwise so that the center vertical lineis the most clearly displayed. [adjusted point : Center(2/1)]

5. Check the entire screen focus and repeat steps 3 to 4, if necessary.

SINGLEFOCUS VR



3-6-2 Adjusting the Screen Voltage

1. Select "Power Off →Info → Menu → Mute → Power On" to enter Service Mode.

2. Initialize all settings to the values appropriate to the corresponding model.

3. Display the Toshiba pattern.

SCREENVR

4. First check IBRM in "G2 Adjust" of Factory and adjust Screen VR until the color of IBRM item turns green.



3-6-3 Adjusting the White Balance


2. Select "Info → Menu → Mute → Power On" to enter Service Mode.


4. Display the Toshiba pattern and adjust the White Balance using CA100 with the coordinates of the corresponding model.

5. Enter Video Adjust1 of Service Mode. Adjust Low/Light.- Adjust Sub Bright to set Y.- Adjust B Cutoff to set y.- Adjust R Cutoff to set x.

6. Enter Video Adjust1 of Service Mode. Adjust High/Light.- Adjust Sub Contrast to set Y.- Adjust B Drive to set y.- Adjust R Drive to set x.

7. Check Low/Light and readjust it if its value has been changed.

8. If you have readjusted Low/Light, readjust High/Light until the two values are identical to the coordinates of the corresponding model.

※ White Balance Standard Data

3-6-4 Check List for the Screen Voltage and White Balance Adjustment

1. The Screen Voltage and White Balance are connected each other, and both of them have to be configured to the correct values.

2. Adjust the White Balance after the Screen Voltage was adjusted, and check if the Screen Voltage is normal after adjusting the White Balance.

3. If the White Balance is readjusted, check the Screen Voltage again.

4. When the adjustment is finished, check the following checklist.- If there is a spot on the screen when turning the TV set off/on, adjust the Screen Voltage again.- If there is a ghost line on the screen, adjust the Screen Voltage again.

CA 100 H/LMeasurement

Point

CA 100 L/LMeasurement

Point

No Item Data Required Adjustment

1 WhiteBalance

x:286± 3 y:290± 3 Y:40± 3x:286± 3 y:290± 3 Y:2.0± .3 White Balance (Standard Data)


MEMO

Block Diagram


7. Block Diagram7-1 Overall Block Diagram

102CI 102CI

3COU 3COU -- D1N D1N

ecaF/PIQ( ecaF/PIQ( -- )nwoD )nwoD

S10UT S10UT

TT

UU

NN

EE

RR

FIVFIV -- WAS WAS

FISFIS -- WAS WAS

101CI 101CI

ERP ERP -- PMA PMA

lortnoC CII lortnoC CII

EEPROMEEPROM

24C1624C16

S108T S108T

0594REE 0594REE

REWOP REWOP

SNART SNART

S108CI S108CI

RTS RTS -- 0576W 0576W

S108D S108D

EDOID EDOID

V3.3+/A V3.3+/A V0.5+/B V0.5+/B

S108CP S108CP

C/PC/ProrrE rorrE

PMA PMA

V/A V/A --11

V/A V/A --22

V/A V/A --11

V/A V/A --22

BWP BWP -- TRC TRC

S444T S444T

remrofsnarT kcab ylF remrofsnarT kcab ylF

103CI 103CI

evirD lacitreV evirD lacitreV

PMA PMA

104T 104T

T.D.H T.D.H

106CI 106CI

PMA dnuoS PMA dnuoS

1R1R

1R1R

VV5.61+/B VV5.61+/B /B/B -- V5.41 V5.41

V41+/A V41+/A

VV5.61+/B VV5.61+/B /B/B -- V5.41 V5.41

S20UT S20UT

TT

UU

NN

EE

RR

RRGGBB

RRGGBB

RRGGBB

RRGGBB

RR RR

LL LL

PSPS

PSPS

TRC TRC

CII CII

2txE 2txE -- TUO_NI V/A TUO_NI V/A

2txE 2txE -- TUO_NI V/A TUO_NI V/A

50R87 50R87O

I33MR87 33MR87

O

I

Block Diagram


7-2-1 Functional blocks UOCIII7-2 Partial Block Diagram

TP12

TP06 TP04TP07

TP11TP10TP09

10. Schematic Diagram

Samsung Electronics

Schematic Diagram

10-1

10-1 MAIN

This Document can not be used without Samsung’s authorization.

PowerSignal

TP04

TP06

TP07

TP09

TP10

TP11

TP12

Schematic Diagram


TP01

TP05

TP02

TP08

TP03

10-2 POWERThis Document can not be used without Samsung’s authorization.

PowerSignal

TP01

TP02

TP03

TP05

TP08

Samsung Electronics

Schematic Diagram

10-3

10-3 SOUNDThis Document can not be used without Samsung’s authorization.

PowerSignal

Schematic Diagram


10-4 CRT This Document can not be used without Samsung’s authorization.

PowerSignal

PCB Diagram


9. PCB Diagram9-1 Main Board

CN602

CN601

CN501

CN701

9-1-1 Assy Main Board

■The Board that Controls Various Signals & Power for Product Operations

9-1-2 Names & Roles of Key Parts

* CN601 : A 4 pin port connected to the SPEAKER port, which delivers the signal from the AMP to the speakers.* CN602 : A 5 pin port connected to the AV ASSY, which delivers the signal to the headphone.* CN501 : A 9 pin port connected to the CRT ASSY, which outputs the R/G/B signal to the CRT ASS'Y for display and Power

signals to the CRT DRIVE.* CN701 : A 8 pin port connected to the AV ASSY, which receives AV2 external input.

PCB Diagram


9-1-3 Main Board Connector Pin

CN601Connected to the Speaker

CN501Connected to the CRT ASSY

PIN No. Pin Name

1 B+200V

2 GND

3 HEATER

4 GND

5 SENSE

6 GND

7 R-OUT

8 G-OUT

9 B-OUT

CN701Connected to the AV ASSY

PIN No. Pin Name

1 L-IN

2 R-IN

3 L-OUT

4 R-OUT

5 GND

6 V-IN

7 GND

8 V-OUT

CN602Connected to the AV SSSY

PIN No. Pin Name

1 R+

2 R-

3 L+

4 L-

PIN No. Pin Name

1 R+

2 R-

3 GND

4 L-

5 L+

PCB Diagram


9-2 CRT Board

CN502

GT502GT503

GT501

■Through this port, the power from the DEFLECTION BLOCK & the R/G/B output signal from the UOC Module are supplied to drive the CRT and AMP.

9-2-2 Names & Roles of Key Parts

* GT502 & GT503 : The TBC-WIRE connection port. This port plays the role of the CRT GROUND.* CN502 : The R/G/B output signal from the UOC Module & the power, which is required to drive the CRT and the AMP, from the

DEFLECTION BLOCK is connected to this port.

9-2-1 Assy CRT Board

9-2-3 CRT Board Connector Pin

CN502Connects the R/G/B signal from the UOC Module.

PIN No. Pin NAME

1 B+200V

2 GND

3 HEATER

4 GND

5 SENSE

6 GND

7 R-OUT

8 G-OUT

9 B-OUT


MEMO

Disassembly & Reassembly


12. Disassembly & Reassembly12-1 Overhaul Disassembly & Reassembly12-1-1 Disassembling the CabinetPart Name Description Description Photo

BackCover

① Remove the 4 screws fixing the Back Cover.: SWRCH18A,M4,L20,RH,+,2S,-,Z

②Remove the 1 screws fixing the Main and T/Board.: RH,+,B,M4,L15,ZPC(BLK)

③ Tap the upper part of the Back Cover 2 or 3 times and pull the Back Cover to separate it from the unit.

Notice: Disassemble the product after disconnecting the powercord and discharge the unit to prevent an electric shock anddamage to the product due to static electricity.



Part Name Description Description PhotoChassisHolder

① Separate the Ass'y Holder chassis from the Front Cabinet.

② Pull the Chassis Holder lifting the fixing clip up.

Notice: Pulling the Chassis Holder by force may damage theclip or the connector. Pull the Chassis Holder just until the clipcomes off the hole.

① Separate the Speakers, the Speaker Wire, the D-Coil Master Wire, and the Remote Control Sensor Cable from the Front Cabinet and the System Board.

② Separate the wire from the Wire pressing the at.

Notice: Since there is a clip to connect the Connector Headerin the Wire Connector, pulling it by force may damage the clip orthe connector. Press the clip down completely and pull the con-nector.

① Separate theAV and Main Board from the Front Cabinet and AV Wire, GT-Pin Wire.

② To separate the Wire, Fixing clip and pressing the Wire.

Pull the chassis while raising the clip fixing the Front Cabinet and

the Holder Chassis

12-1-2 Disassembling the CRT and Chassis



Part Name Description Description PhotoChassisHolder

① Separate the 7P, 8P Wire connecting the DY Wire and theCRT PCB.

② To separate the Wire, Fixing clip and pressing the Wire.

① Remove the CRT.

② Separate the TBC Wire,GND,VM cables from the CRT Ass'y.(GND, VM, Tilt Model by option)

Notice: : When take off VM,Tilt cable from CRT PCB, don't touch PIN in CRT electric gun.

① Separate the cables connecting the FBT and the CRT.

Notice: Since there may be a remaining high-voltage currentwithin the CRT, take care not to touch the CRT hole with metalor a part of yourself when separating the cables.



Part Name Description Description PhotoCRTAss'y

① Separate the cables from the Main Board and CRT Ass'y.

① Separate the wires from the FBT of the Main Board and theCRT Ass'y.

② To separate the thick white and white wires, up the yellowsoket while the push-type clip at the connector.

③ To separate the thick red and red wires, up the red soket while the push-type clip at the connector.

Notice : Take care when separating the wires because pullingthe wires by force may damage the socket. In addition, separatethe wires on a flat and clean surface so as to prevent scratchingof the material and the PCB.

Pull the wires while pressingon the fixing clip.

12-1-3 Disassembling the CRT Ass'y

Operation Instruction & Installation


11. Operation Instruction & Installation11-1 Product Features and Functions11-1-1 Front

cable television network

or

11-1-2 Side

11-1-3 Rear

Operation Instruction & Installation


11-1-4 Remote Control

MENUUsed to display the on-screen menu or return tothe previous menu.

/ / /Used to control thecursor in the menu.

DUAL

SOURCE

I-IIUsed to select the

Used to display all of theavailable video sources.

sound mode.

TURBOUsed to select the turbosound option.

S.MENUUsed to display thesound menu.

PRE-CHUsed to switchrepeatedly between thelast two channelsdisplayed.

P / Used to display the nextor previous storedchannel.

INFOUsed to view thechannel information andsetting status youselected.

EXITUsed to exit from anydisplay or return tonormal viewing.

ENTERWhile using the on-screen menus, press theENTER button toactivate (or change) aparticular item.

SLEEPUsed to select a presettime interval forautomatic shut off.

P.MODEUsed to select thepicture effect.

S.MODEUsed to select thesound effect.

POWERUsed to switch the TVon and off.

Numeric buttonsUsed to select channelsdirectly.

-/--Used to select a channelnumbered ten or over.Press this button, then“--” symbol isdisplayed. Enter thetwo-digit channelnumber.

MUTEUsed to switch thesound off temporarily. Toturn the sound back on,press the MUTE, , or

button.

/Used to increase ordecrease the volume.

TVUsed to return to the TVmode when it is inexternal input mode.

1. Make sure all protective devices are properly installedincluding non-metallic handles and compartment coverswhen installing or re-installing the chassis or chassisassemblies.

2. Make sure that no gaps exist between the cabinets forchildren to insert their fingers in to prevent children fromreceiving electric shocks. Gaps mentioned above includeventilation holes of a too great magnitude between thevaccum tube and the cabinet mask, and the improperinstallation of the rear cabinet.

Errors may occur when the resistance is below 1.0 ㏁ orover 5.2 ㏁.In these cases, make sure that the device is repairedbefore sending it back to the customer.

3. Check for Electricity Leakage (Figure 1-1)Warning: Do not use an insulated transformer for check-ing the leakage. Use only those current leakage testersor mirroring systems that comply with ANSIC 101.1 andthe Underwriter Laboratory's specifications (UL1410,59.7).

Fig. 1-1 AC Leakage Test

4. A high voltage is maintained within the specified limitsusing safety parts, calibration and tolerances. When voltage exceeds the specified limits, check each specialpart.

5. Warning for Engineering Changes:Never make any changes or additions to the circuitdesign or the internal part for this product.Ex: Do not add any audio or video accessoryconnectors. This might cause physical damage.Furthermore, any changes or additions to the originaldesign/engineering will invalidate the warranty.

6. Warning - Hot Chassis:Some TV chassis are directly connected to one end ofthe AC power cord for electrical reasons.Without insulated transformers, the product can only berepaired safely when the chassis is connected to theearthed end of the AC power source.

To make sure the AC power cord is properly connected,follow the instructions below. Use the voltmeter tomeasure the voltage between the chassis and theearthed ground. If the measurement is over 1.0V, unplugthe AC power cord and change the polarity before re-inserting it. Measure the voltage between the chassisand the ground again.

7. Some TV chassis are shipped with an additionalsecondary grounding system. The secondary system isadjacent to the AC power line. These two groundingsystems are separated in the circuit using anunbreakable/unchangeable insulation material.

8. When any parts, material or wiring appear overheated ordamaged, replace them with new regular onesimmediately. When any damage or overheating isdetected, correct this immediately and make a regularcheck of possible errors.

9. Check for the original shape of the lead, especially thatof the antenna wiring, any sharp edges, the AC powerand the high voltage power. Carefully check if the wiringis too tight, incorrectly placed or loose. Never change thespace between the part and the printed circuit board.Check the AC power cord for possible damages. Keepthe part or the lead away from any heat-emittingmaterials.

Precaution


LEAKAGECURRENTTESTER

DEVICEUNDERTEST

TEST ALLEXPOSED METAL

SURFACES

2-WIRE CORD

ALSO TEST WITHPLUG REVERSED

(USING AC ADAPTERPLUG AS REQUIRED)

EARTHGROUND

(READING SHOULDNOT BE ABOVE

0.5mA)

To avoid possible damages or electric shocks or exposure to radiation, follow the instructions below with regard to safety,installation, service and ESD.

1. Precaution

1-1 Safety Precautions

10. Safety Indication:Some electrical circuits or device related materialsrequire special attention to their safety features, whichcannot be viewed by the naked eye. If an original part isreplaced with another irregular one, the safety orprotective features will be lost even if the new one has ahigher voltage or more watts.

Critical safety parts should be bracketed with ( ).Use only regular parts for replacements (in particular,flame resistance and dielectric strength specifications).Irregular parts or materials may cause electric shock orfire.

Precaution


!

1. The service instructions are printed on the cabinet, andshould be followed by any service personnel.

2. Make sure to unplug the AC power cord from the powersource before starting any repairs.(a) Remove or re-install parts or assemblies.(b) Disconnect the electric plug or connector, if any.(c) Connect the test part in parallel with the electrolyticcapacitor.

3. Some parts are placed at a higher position than theprinted board. Insulated tubes or tapes are used for thispurpose. The internal wiring is clamped using buckles toavoid contact with heat emitting parts. These parts areinstalled back to their original position.

4. After the repair, make sure to check if the screws, partsor cables are properly installed. Make sure no damage iscaused to the repaired part and its surroundings.

5. Check for insulation between the blade of the AC plugand that of any conductive materials (i.e. the metalpanel, input terminal, earphone jack, etc).

6. Insulation Check Process: Unplug the power cord fromthe AC source and turn the switch on. Connect the insu-lating resistance meter (500v) to the AC plug blade.

The insulating resistance between the blade of the ACplug and that of the conductive material should be morethan 1 ㏁.

7. Any B+ interlock should not be damaged.If the metal heat sink is not properly installed, noconnection to the AC power should be made.

8. Make sure the grounding lead of the tester is connectedto the chassis ground before connecting to the positivelead. The ground lead of the tester should be removedlast.

9. Beware of risks of any current leakage coming intocontact with the high-capacity capacitor.

10. The sharp edges of the metal material may causephysical damage, so ensure wearing protective glovesduring the repair.

Precaution


Warning 1: First carefully read the "Safety Instruction" in this service manual.When there is a conflict between the service and the safety instructions, follow the safety instruction at all times.

Warning 2: Any electrolytic capacitor with the wrong polarity will explode.

1-2 Servicing Precautions

1-3 Static Electricity Precautions1. Some semi-conductive ("solid state") devices are

vulnerable to static electricity. These devices are knownas ESD. ESD includes the integrated circuit and the fieldeffect transistor. To avoid any materials damage fromelectrostatic shock, follow the instructions describedbelow.

2. Remove any static electricity from your body byconnecting the earth ground before handling anysemi-conductive parts or ass'ys. Alternatively, wear adischargeable wrist-belt.(Make sure to remove any static electricity beforeconnecting the power source - this is a safety instructionfor avoiding electric shock)

3. Remove the ESD ass'y and place it on a conductivesurface such as aluminum foil to prevent accumulatingstatic electricity.

4. Do not use any Freon-based chemicals.Such chemicals will generate static electricity thatcauses damage to the ESD.

5. Use only grounded-tip irons for soldering purposes.

6. Use only anti-static solder removal devices.Most solder removal devices do not support ananti-static feature. A solder removal device without ananti-static feature can store enough static electricity tocause damage to the ESD.

7. Do not remove the ESD from the protective box until thereplacement is ready. Most ESD replacements arecovered with lead, which will cause a short to the entireunit due to the conductive foam, aluminum foil or otherconductive materials.

8. Remove the protective material from the ESDreplacement lead immediately after connecting it to thechassis or circuit ass'y.

9. Take extreme caution in handling any uncovered ESDreplacements. Actions such as brushing clothes or liftingyour leg from the carpet floor can generate enough staticelectricity to damage the ESD.

Precaution


CAUTION

These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in theoperating instructions unless you are qualified to do so.

Precaution


1-4 Installation Precautions1. For safety reasons, more than two people are required

for carrying the product.

2. Keep the power cord away from any heat emittingdevices, as a melted covering may cause fire or electricshock.

3. Do not place the product in areas with poor ventilationsuch as a bookshelf or closet. The increased internaltemperature may cause fire.

4. Bend the external antenna cable when connecting it tothe product. This is a measure to protect it from beingexposed to moisture. Otherwise, it may cause a fire orelectric shock.

5. Make sure to turn the power off and unplug the powercord from the outlet before repositioning the product.Also check the antenna cable or the external connectorsif they are fully unplugged. Damage to the cord maycause fire or electric shock.

6. Keep the antenna far away from any high-voltage cablesand install it firmly. Contact with the high-voltage cable orthe antenna falling over may cause fire or electric shock.

7. Check the basics of the screen test.- Image position/size, Tilt adjustment


MEMO

Troubleshooting


6. Troubleshooting6-1 Checkpoints by Error Mode■ Power LED: Check that the LED works when turning the Master Switch ON/OFF

■ LED Indicators: See table 6-3-1 Basic Troubleshooting: LED Diagnosis on the Front Panel.

■ In case of a power failure or abnormal screen, check the following items.1) Check that the power cord is correctly connected to a 230V wall outlet.2) Check that the Master Switch has been pressed.3) Check that the transmitter is turned on.4) Check that transmitter device selection is set to TV.5) Check that the signal cable is properly connected.6) Check that channel setting has been set.

Troubleshooting


6-1-1 Flow Chart for Malfunction

dnuoS oN & erutciP oN

CA eht kcehCsserpmi egatlov

retsam eht kcehCno hctiws

eht kcehC”S108PF“ ESUF

eht kcehC1#”S108D“

seY

eht kcehC1# S108CI

F0576W

”S108PF“ egnahC

taelpmoCrewoP oN riapeR

seY

”S108D“ egnahC

oNoN

seYseY

”S108CI“ egnahC

oN

seY trap srehto eht kcehC

IC602 IC902TU01S

IC501

T801S

IC801S

D801S

FP801S Q404

Q401

T444S

IC301

IC301SD811

PIP

dnuos on & erutcip oN)KO rewop ts1(

enil V521+ eht kcehC

3# niP +B 444Tkcehc dna nepO

srehto eht kcehCenil +B

seY

oN

”104Q“ eht kcehC

seY

taelpmoCrewop on riaper

”104Q“ eht egnahC

oN

seY

nepo )A118D(”118D“kcehc dna

oN

”118D“ eht egnahC)A118D(

seY

oN

enil V521+ eht kcehCtrap srehto

Troubleshooting


6-2 Trouble-shooting with New Features6-2-1 Installation & Connection

Problem SolutionThe power does not turn on. Check if the power cord is properly connected.Air broadcasting does not work. Check if the antenna is properly installed.Cable broadcasting does notwork. Subscribe to a local cable broadcasting firm and get support.

Satellite broadcasting does notwork. Install a satellite antenna (Parabola) and connect it to the TV.

6-2-2 Menu & Remote ControlProblem Solution

The remote control does not work.

■ Press the Select Device button to select the TV or external device.■ Replace the battery of the remote control with a new one.■ Insert the battery making sure the polarity (+,-) is correct.■ Check if the angle or the distance is sufficient, or if there is any interference between the

product and the remote control.■ Make sure the user has pressed the correct button.■ To avoid direct sunlight to the receiving panel of the TV, remove any indoor lighting or

change the location of the TV.■ Check if the power switch at the back left of the TV is turned on.

Cannot change the channel withthe remote control.

■ Press the Select Device button to select the TV.■ Change the channel using the remote control of the cable or satellite receiver.

Cannot select an A/V channel. Press the TV/AV button and check if the AV item is grayed out. When the AV item is grayedout, you cannot select an A/V channel. Check if the connector is properly connected.

Cannot select a menu. Check if the menu is grayed out. If a menu is grayed out, it cannot be selected.

Troubleshooting


6-2-3 ScreenProblem Solution

The screen is black and there isno sound.

■ Check if the power cord is properly connected.■ Turn on the power. ■ Select an AV channel that corresponds to the external device.

Only the screen is blank/it is darkor too bright. Adjust the screen brightness.

The screen is blue/the externalchannel is not displayed.

■ Check if the connector is properly installed.■ Select an AV channel that corresponds to the external device.

The screen overlaps(double/triple).

■ Check if the antenna is properly installed. ■ Adjust the position, angle or direction of the antenna.

The screen is snowy or unclear.The picture quality gets worsewhen it is windy

■ Check if the antenna has been bent or moved by the wind.■ Check the antenna for its lifetime. (Normally 3 - 5 years, 1-2 years near the coast)

Dotted or semi-dotted lines aredisplayed on the screen. Install the antenna as far away from the road as possible.

The screen is black and white. ■ Adjust the color density.■ Check if the connector is properly installed.

The colors of the screen areodd/strange. Adjust the color tones.

Unusual lines appear on thescreen. Keep the antenna away from the power cord or connectors if possible.

Unusual lines appear on thescreen when watching orrecording to video.

Keep the video player as far away from the TV as possible.

6-2-4 SoundProblem Solution

There is no sound. ■ Increase the volume.■ Press the Mute button.

The sound is very low. ■ Increase the volume.■ Set the auto volume control to ON.

There is a lot of noise. Keep the antenna away from the power cord or connectors if possible.The selected language does notappear. Press the Multiplex button to select the TV.

Troubleshooting


6-2-5 ChannelProblem Solution

There are no channels available.■ Check if the antenna is properly installed.■ Press the Auto Channel button to store channels.■ Contact your local broadcasting service station.

Some channels are not available.

■ Adjust the position, angle or direction of the antenna.■ Activate the Reception Sensitivity Boost feature.■ Contact your local broadcasting service station.■ Use the number keys to select a specific channel and press Store/Clear to memorize it.

Only the UHF (14-69) channelsare not available. Check if the antenna is able to receive UHF signals.

6-2-6 OthersProblem Solution

The TV makes a noise as ifsomething is dropping inside.

This noise may occur when the plastic material inside the TV expands or contracts accordingto the seasonal temperature or humidity. This is like the noise from a furniture/cabinet/sinkunit, and there is no need for concern.

Troubleshooting


6-3 Troubleshooting Procedures by Error Modes6-3-1 Basic Troubleshooting: Diagnosis of LED on the Front Panel

6-3-2 Troubleshooting by the Checksum

■ Diagnosis of trouble by the checksum is neither reliable nor convenient.You can only use the checksume of the current direct-view TV to determine whether the software is corrupted or not.The Checksum value is determined according to the version of the software loaded on the set.Therefore, you can determine whether the software has been properly downloaded, if you know the correct checksum for that version of the software.

You can check the checksum according in the following order.Factory Mode → Checksum → Right Button → Calculate Checksum → Output Checksum (e.g. 3036)

■ Checksum ExamplesT-HITPEU-1000:checksum=5B67T-HITPEA-1000:checksum=51A7

Power Description

○ This happens when the Master Switch is not pressed or the power cord is disconnected.

●This happens when the power cord is connected and the power switch is pressed.If you cannot set the power switch on by pressing it, check the power switch Ass'y.

○→◑→●

If you press the power switch of the transmitter or the channel key on the remote control when inSt-BY status, the screen will be turned on.If the LED blinks and the screen is not displayed, check the connection between the ControlAssy and the Main Board.

● : Light is On◑ : Light is Blinking○ : Light is Off

Reference Information


14. Reference Information14-1 Other issues related to other products

Problem Descriptions

A fixed screen can causepermanent damage to the TVBraun tube.

Braun, PDP and LCD TVs can all be damaged. When a still image is displayed in a sequence,this can leave stains or after-images due to the characteristics of the panel.However, the DLP TV has the advantage that no stains or after-images are left on the screen.The DLP TV has mirror pixels on the DMD panel that project the beam onto the screen, inwhich the mirror is a digital representation of 0s and 1s, leaving no trace of light.The mirror returns to a blank state so that no stains or after-images are left.

Confusion between theANYNET Port and theSERVICE Jack Port

The SAMSUNG SKY500N model has both an ANYNET port and a SERVICE jack port.Because the shape of the ANYNET port on the DLP TV is the same as that of the SERVICEjack port of the SKY500N, it fails to turn the TV off after a connection has been reported.The ANYNET port uses an RS232 port called Phone Jack, and the SERVICE jack port alsouses the RS232 port. However, you must not connect the SERVICE port and the ANYNET port.Check if the port is the ANYNET port or the SERVICE port before connecting the port.Even if the TV cannot be turned on after connecting, the TV will turn on if you disconnect theconnection.

Length of DVI Cable / PC RGBCable

- A too long DVI cable may cause a malfunction or degradation of the visual quality due to an attenuation of the signal. There is no recommendation for the cable length at present.In general, although a cable length of up to 5 meters should work, please check if video is properly displayed on the screen after connecting. If you think the length of the cable is longer than for normal use, check the visual quality of the video on the screen and shorten the length, if necessary.

- This also applies to the PC RGB (D-Sub) cable. When the length of the cable is longer than for normal use, video may not be displayed on the screen. In this case, shorten the cable length.

When a digitally distributed TVuser receives HD-ratedbroadcasts:

The digital distributed TV (Ready Technique) can render HD sources as HD-rated.However, you need to install a set-top box for this purpose. The digital TV alone cannot renderHD broadcasting as HD-rated. Install the formal set-top box for HD broadcasts.

When a digital distributed TVuser selects normal size (4:3) toreceive SD-rated digitabroadcasts:

The digitally distributed TV (Ready Technique) renders any broadcasting service as SD-rated.However, when connected to a set-top box, the digital TV renders HD broadcasts as HD-ratedand renders SD as SD-rated. The screen size is scaled to 4:3.

When a digitally built-in TV userreceives SD (air) broadcasting:

The digitally integrated TV ("built-in" type) renders SD broadcasting as SD-rated.This can be understood easily.Even a high-resolution TV cannot improve a low resolution picture into high quality.In contrast, an SD-rated TV cannot represent HD broadcasting as HD because the resolution ofthe TV is lower than the original.

When selecting a picture size of4:3 in connection with acomputer or a multimediadevice:

The representation capability of SD or HD-rated depend entirely on the TV set. The HD TV canrender HD broadcasting as HD-rated only when it receives HD sources.In the meantime, the HD TV renders SD as SD-rated when it receives SD sources.The picture size has nothing to do with the resolution; TV models like SVP-XXL3HD orSVP-XXL6HD have a size adjustment feature to 16:9, 4:3, Panorama, Zoom1, Zoom2 and AutoWide. This is about the aspect ratio of the top and bottom boundaries to the overall screen andusers can select their preference.



■ SD/HD broadcasts and the TV's display capability are related

1. A digital broadcast should be transmitted in wide screen (an aspect ratio of 16:9) HD. If the broadcasting station converts aconventional program created in normal screen (aspect ratio of 4:3) into a digital signal and broadcasts the signal, the left and right of the picture will not be displayed.This symptom also appears in other manufacturer's TV's. The three appliance companies are trying to resolve the problem through the Ministry of Information and Communication.＊ When watching an SD (normal) broadcast through a Digital (Wide) TV (480P normal broadcast)＊ When watching an SD (normal) broadcast through a Digital Ready (Wide) TV (Using a set-top-box)＊ When watching an analog (normal) broadcast through a wide TV

(When watching a broadcast after changing the aspect ratio of the TV from 16:9 (wide screen) to 4:3)

2. When watching a DVD title or video tape in wide screen (21:9) through a wide (16:9) TV, watching video from a computer or game console by selecting the aspect ratio to 4:3, or watching video from a DVD, VCR, computer or game console through a wide TV by selecting the aspect ratio to normal (4:3) or wide (21:9), the left and right, or top and bottom of the picture will not be displayed.This symptom appears in other manufacturer's TV's. The three appliance companies are trying to resolve the problem through the Ministry of Information and Communication.

■ Changing the Order of the Picture Size for 16:9 Display Devices

■ Changing the Order of the Picture Size for DTV 1080i/720p Sources

■ Restrictions

1. When you want to change the picture size in PIP 'ON', you must turn the PIP off before changing the size.However, you can change the main picture size even in PIP ON for products with no restrictions.

2. When the picture size is not Normal (4:3 for 4:3 display devices, 16:9 for 16:9 display devices) and you turn PIP on, the picture size is changed to Normal.However, you can turn PIP on without changing the picture size for products with no restrictions.

3. In the OSD notation for the picture size, 16:9 is represented as "Wide" instead of "16:9" for devices other than with 16:9 displays.Ex: For LCD 15:9 devices, "Wide" is displayed on the OSD instead of "16:9".

4. The picture size can be changed even in the blue screen.However, the picture size should be controlled by the product specifications if the change is impossible due to hardwarerestrictions.



Digital BroadcastDigital Broadcast is a television broadcasting signal digitizedand transmitted according to the United States' terrestrial digitalbroadcast standard, or ATSC.

MonoA type of audio interface that transmits audio signals through asingle channel. Through a mono interface, it is hard to experience stereophonicsound and sound is played only by one speaker.

Reception Sensitivity AmplificationA signal amplification technique that amplifies weak broadcast-ing signals by applying satellite technology to provide a bettervisual quality even for users in regions where only weak broad-casting signals are available.

StereoA type of audio interface that transmits audio signals through 2channels.Stereo transmits audio signals for the right and left channels sothat you can experience stereophonic sound, and the sound isplayed with 2 speakers.

Analog BroadcastAnalog Broadcast is a television broadcasting signal transmit-ted according to the NTSC standard.

ANTENNA IN PortA port to connect the TV aerial using a coaxial cable. It is gen-erally used to watch public broadcast programs.

English CaptionA function that shows English caption or text information includ-ed in the broadcasting signal or video tape. You can use thisfunction to study English by watching AFKN or CC markedvideo tapes.

Video/Audio PortsYou may experience poor visual and audio quality when watch-ing a video tape on channel 3 or 4 through the antenna cable.You can experience better visual and audio quality connectingthe TV and VCR through the Video/Audio ports. The video portis distinguished by the color yellow, and the audio ports are dis-tinguished by the white (left) and red colors (right).

External InputExternal Input is connecting video devices such as a VCR,camcorder, DTV receiver, DVD, etc. as a video source.

Satellite BroadcastSatellite Broadcast transmits programs via satellite so that thebroadcast is viable in all areas at a high visual and sound quali-ty. It provides approximately 100 channels including publicbroadcast channels. To view satellite broadcast, you have toinstall an additional receiver.

Wired BroadcastSatellite Broadcast refers to movie, entertainment and educa-tional programs transmitted by the broadcasting station in ahotel or school.

Audio MultimixAudio Multimix provides 2 languages for audio when broadcast-ing a foreign movie, drama, news, etc. You can select and lis-ten to one of the supported languages or you can select andlisten to both languages simultaneously.

Component Port (Green, Blue, Red)The Component Port separately transmits the luminance signaland provides the best quality of all video connection types.

Cable BroadcastCable Broadcast transmits programs via cable instead of radiowave. To view a cable broadcast, you need to subscribe to yourlocal cable broadcast service provider and install an additionalreceiver.

TunerA device that enables selecting a specific frequency for a chan-nel on a TV or radio.

Anynet Anynet is an AV network system that enables the easy-to-useAV interface for users by controlling connected AV devicesthrough the Anynet menu when AV devices of SamsungElectronics are connected.

DVD (Digital Versatile Disc)DVD is a large capacity media that can save multimedia con-tent such as video, game, audio applications, etc. using MPEG-2 video compression technology on a CD-sized disc.

S-VIDEO IN PortThis is called super video. S-Video is a type of video signalwhich has the video luminance and color signals separated inorder to provide a better visual quality.

VHF/UHFVHF refers to TV channels 2 to 13, and UHF refers to TV chan-nels 14 to 69.

14-2 Technical Terms


MEMO

Circuit Description


13. Circuit Description13-1 Circuit Key Point13-1-1 Pin configuration of “Face-down” QIP versions

13-1-2 UOC3(TDA120XX) Pin Description

1

1

100

0

1

laitinI laitinI

)uneM ,nwoD emuloV ,pU emuloV ,nwoD lennahC ,pu lennahC(1 yeK lenaP-niarD nepO3.3P1yeKlenaPp51

troP potS suB-niarD nepO2.3PpotSsuBp41

DI 2tracS-yaR-X kcaJ ACR-niarD nepO1.3P2tracSp31

DI 1tracS-- noitpO ACR(W/S retliF waS dnuoS M : dnuoS ,woL )hgiHniarD nepO0.3P1tracSp21

nO etuM dnuoS : hgiH- ffO etuM dnuoS : woL-lluP hsuP1.2PetuMdnuoSp11

nocomeR ,edoMyBdnatS(deL-lluP hsuP0.2PDELp01ataD suB C2I-lluP hsuP7.1PADSp8kcolC suB C2I-lluP hsuP6.1PLCSp7

3.1P

1.1P

0.1P

5.0P

0.0P

retsigeR retsigeR

lluP hsuP

lluP hsuP

lluP hsuP

niarD nepO

lluP hsuP

epyT troP epyT troP

nO rewoP : hgiH- ffO rewoP : woL-rewoPp6

)woL : 85.3CSTN ,hgiH : LAP(W/S LAP/CSTN-- WCretliFwaSp5

lioC gnissuageD-liocDp4

RInocomeR-RIp2

tliT-tliTp15

( ( mociM mociM )46 ~ 45 ,11 ~ 1 niP )46 ~ 45 ,11 ~ 1 niPemaN emaNniP niPoNoN

1

1

100

0

1

laitinI laitinI

-

)

retsigeR retsigeR epyT troP epyT troP

- )woL : L ,hgiH : 'L(W/S waS dnuoS 'LL /

( ( noitpircseD noitpircseD noitpircseD notpircseD mociM mociM )46 ~ 45 ,11 ~ 1 niP )46 ~ 45 ,11 ~ 1 niPemaN emaNniP niPoNoN

Europe

China :

Circuit Description


13-1-3 Control System Features

＊ 80C51 micro-controller core standard instruction set and timing＊ 0.4883 ms machine cycle (6 clock cycles with 12.288 MHz derived from an xtal frequency of 24.576MHz)＊ maximum 256k x 8-bit program ROM＊ maximum of 8k x 8-bit auxiliary RAM＊ auxiliary RAM page pointer＊ 12-level interrupt controller for individual enable/disable with two level priority＊ stand-by, idle and power-down modes＊ watchdog timer＊ two 16-bit timer/counters＊ additional 24-bit timer (16-bit timer with 8-bit Pre-scaler)＊ 16-bit data pointer＊ five 6-bit pulse width modulator (PWM) outputs for control of TV analogue signals.＊ one 14-bit PWM for voltage synthesis tuning control.＊ 8-bit ADC with 4 multiplexed inputs.＊ remote control pre-processor (RCP).＊ I2C byte level bus interface.＊ universal asynchronous receiver transmitter (UART)＊ 24 General I/O.

13-1-4 Vertical Circuit (LA78045)

rof lortnoc niag kcab deeF evah osla ezis erutcip lacitrev

tfihs lacitrev rotcennoc emos

rof lortnoc niag kcab deeF evah osla ezis erutcip lacitrev

tfihs lacitrev rotcennoc emos

Circuit Description


13-1-5 Power IC (STR-W6750F)

egatlov wol tupni CA

Circuit Description


13-1-6 TDA6109JF

Circuit Description


13-1-7 CRT Drive

13-1-8 Spot Killer

Circuit Description


13-1-9 Picture In Picture

Circuit Description


13-1-10 X-Ray Protection

tnioP tseT noitcetorP

egatloV retaeH morF

noitcetorP yaR-X”OTHE“ COU oT

47# niP


MEMO

Wiring Diagram


8. Wiring Diagram8-1 Overall Wiring

SIGN A L

POW E RMAIN AV

CRTSPEAKER

Audio Out

AV Signal

CRT Power Supply & Main Input

Wiring Diagram


8-2 Pin Connection

MAIN

CN6011 R+2 R-3 L+4 L-

CN5011 B+200V2 GND3 HEATER4 GND5 SENSE6 GND7 R-OUT8 G-OUT9 B-OUT

CN7011 L-IN2 R-IN3 L-OUT4 R-OUT5 GND6 V-IN7 GND8 V-OUT

CN602

TU01S

2 SCART

TUNER

1 R+2 R-

GND3L+4

5 L-

■■ SLIM FIT CRT

■ Multi Wide System

■■ LNA Plus(Low Noise Amplifier)

■ Turbo Plus

■■ Low Stand-By Power Wattage

■■ SOUND Equalizer

■ 1-Tuner PIP(option)

CW-21Z413N

This Service Manual is a property of Samsung Electronics Co.,Ltd.Any unauthorized use of Manual can be punished under applicableInternational and/or domestic law.

© Samsung Electronics Co., Ltd. Oct. 2006Printed in KoreaAA82-04219A

Table of Contents

Chapter 1 Precaution■ 1-1 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1■ 1-2 Servicing Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 ■ 1-3 Static Electricity Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4■ 1-4 Installation Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5

Chapter 2 Product Specification■ 2-1 Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1■ 2-2 Key Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2■ 2-3 Specifications Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3■ 2-4 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

Chapter 3 Alignment & Adjustment■ 3-1 Service Instruction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1■ 3-2 How to Access Service Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2■ 3-3 Factory Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3■ 3-4 Service Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9■ 3-5 Software Upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11■ 3-6 Replacements & Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-15

Chapter 4 Exploded View & Part List■ 4-1 CW21Z413NCXXEC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

Chapter 5 Electrical Part List■ 5-1 CW21Z413NCXXEC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

Chapter 6 Troubleshooting■ 6-1 Checkpoints by Error Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1■ 6-2 Trouble-shooting with New Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3■ 6-3 Troubleshooting Procedures by Error Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6

Chapter 7 Block Diagram■ 7-1 Overall Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1■ 7-2 Partial Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2

Chapter 8 Wiring Diagram■ 8-1 Overall Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1■ 8-2 Pin Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2

Chapter 9 PCB Diagram■ 9-1 Main Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1■ 9-2 CRT Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-3

Chapter 10 Schematic Diagram■ 10-1 MAIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1■ 10-2 POWER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-2■ 10-3 SOUND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-3■ 10-4 CRT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-4

5-1Samsung Electronics

Electrical Part List

ASSY CHASSISM0017 AA91-09967A ASSY CHASSIS CW21Z403NCXXEC,TH,ELDOR 1 S.N.A

M0014 AA94-15923A ASSY PCB MAIN CW21Z403NCXXEC,S16D,TH,ELD 1 S.AC101 2202-000632 C-CERAMIC,MLC-AXIAL 100nF,20%,50V,Z5U,TP 1 S.AC102 2401-003578 C-AL 1000uF,20%,50V,Z5U,TP 1 S.AC104 2401-000302 C-AL 100uF,20%,25V,GP,TP,6.3x11,5 1 S.AC107 2202-000632 C-CERAMIC,MLC-AXIAL 100nF,20%,50V,Z5U,TP 1 S.AC108 2401-000480 C-AL 10uF,20%,50V,GP,TP,5x11,5 1 S.AC109 2401-003036 C-AL 100uF,20%,16V,GP,TP,5X11mm,5mm 1 S.AC110 2202-000632 C-CERAMIC,MLC-AXIAL 100nF,20%,50V,Z5U,TP 1 S.AC116 2202-000796 C-CERAMIC,MLC-AXIAL 1NF,10%,50V,Y5P,TP,3 1 S.AC117 2202-000127 C-CERAMIC,MLC-AXIAL 10nF,+80-20%,25V,Y5V 1 S.AC120 2202-000127 C-CERAMIC,MLC-AXIAL 10nF,+80-20%,25V,Y5V 1 S.AC125 2202-000632 C-CERAMIC,MLC-AXIAL 100nF,20%,50V,Z5U,TP 1 S.AC130 2202-000632 C-CERAMIC,MLC-AXIAL 100nF,20%,50V,Z5U,TP 1 S.AC131 2202-000632 C-CERAMIC,MLC-AXIAL 100nF,20%,50V,Z5U,TP 1 S.AC132 2202-000632 C-CERAMIC,MLC-AXIAL 100nF,20%,50V,Z5U,TP 1 S.AC133 2305-000665 C-FILM,LEAD-PEF 100nF,5%,63V,TP,7.5x4.0x 1 S.AC137 2401-000660 C-AL 2.2uF,20%,50V,GP,TP,5x11,5 1 S.AC139 2401-000660 C-AL 2.2uF,20%,50V,GP,TP,5x11,5 1 S.AC140 2305-000665 C-FILM,LEAD-PEF 100nF,5%,63V,TP,7.5x4.0x 1 S.AC141 2401-000660 C-AL 2.2uF,20%,50V,GP,TP,5x11,5 1 S.AC142 2401-000660 C-AL 2.2uF,20%,50V,GP,TP,5x11,5 1 S.AC143 2202-000222 C-CERAMIC,MLC-AXIAL 3.3nF,20%,16V,Y5P,TP 1 S.AC144 2202-000807 C-CERAMIC,MLC-AXIAL 22nF,+80-20%,25V,Y5V 1 S.AC145 2306-000134 C-FILM,LEAD-PPF 150nF,5%,400V,TP,19x17x1 1 S.AC146 2401-000480 C-AL 10uF,20%,50V,GP,TP,5x11,5 1 S.AC147 2202-000807 C-CERAMIC,MLC-AXIAL 22nF,+80-20%,25V,Y5V 1 S.AC148 2305-000289 C-FILM,LEAD-PEF 220nF,5%,63V,TP,-,5mm 1 S.AC150 2202-000127 C-CERAMIC,MLC-AXIAL 10nF,+80-20%,25V,Y5V 1 S.AC202 2401-000913 C-AL 22uF,20%,16V,GP,TP,5x11,5 1 S.AC204 2202-000632 C-CERAMIC,MLC-AXIAL 100nF,20%,50V,Z5U,TP 1 S.AC205 2202-000632 C-CERAMIC,MLC-AXIAL 100nF,20%,50V,Z5U,TP 1 S.AC206 2401-000480 C-AL 10uF,20%,50V,GP,TP,5x11,5 1 S.AC212 2305-000665 C-FILM,LEAD-PEF 100nF,5%,63V,TP,7.5x4.0x 1 S.AC218 2401-000480 C-AL 10uF,20%,50V,GP,TP,5x11,5 1 S.AC219 2202-000632 C-CERAMIC,MLC-AXIAL 100nF,20%,50V,Z5U,TP 1 S.AC301 2301-000342 C-FILM,LEAD-PEF 2.2nF,5%,50V,TP,7.4x3.9x 1 S.AC302 2201-000192 C-CERAMIC,DISC 0.01nF,0.25pF,500V,C0G,-, 1 S.AC303 2401-000360 C-AL 100uF,20%,50V,GP,TP,8x11.5,5 1 S.AC304 2401-000365 C-AL 100uF,20%,50V,WT,TP,10x12.5mm, 1 S.AC305 2305-000285 C-FILM,LEAD-PEF 220NF,5%,100V,TP,10.5X5. 1 S.AC306 2201-000003 C-CERAMIC,DISC 0.068NF,10%,2KV,SL,TP,7X5 1 S.AC312 2202-000796 C-CERAMIC,MLC-AXIAL 1NF,10%,50V,Y5P,TP,3 1 S.AC313 2202-000796 C-CERAMIC,MLC-AXIAL 1NF,10%,50V,Y5P,TP,3 1 S.AC401 2301-000383 C-FILM,LEAD-PEF 10nF,5%,50V,TP,6x7x3.2mm 1 S.AC402 2401-000302 C-AL 100uF,20%,25V,GP,TP,6.3x11,5 1 S.AC403 2201-000599 C-CERAMIC,DISC 0.56NF,10%,500V,Y5P,TP,5. 1 S.AC404 2305-000382 C-FILM,LEAD-PEF 4.7nF,5%,400V,TP,-,5mm 1 S.AC405 2301-001338 C-FILM,LEAD-OTHER 0.68NF,5%,1.6KV,BK,28X 1 S.AC406 2305-000665 C-FILM,LEAD-PEF 100nF,5%,63V,TP,7.5x4.0x 1 S.AC407 2401-002268 C-AL 2.2uF,20%,250V,LZ,TP,8X11,5 1 S.AC408 2201-000556 C-CERAMIC,DISC 0.47NF,10%,500V,Y5P,TP,5. 1 S.AC409 2401-001397 C-AL 470uF,20%,25V,GP,TP,10x16,5 1 S.AC410 2401-002288 C-AL 470uF,20%,25V,WT,TP,10x20,5 1 S.AC411 2201-000556 C-CERAMIC,DISC 0.47NF,10%,500V,Y5P,TP,5. 1 S.A

Loc.No. Code No. Description Specification Q'ty SA/SNA Remark

5. Electrical Part List5-1 CW21Z413NCXXECYou can search for the updated part code through ITSELF web site.URL:http://itself.sec.samsung.co.kr

C412 2401-001527 C-AL 47uF,20%,250V,HR,TP,13x25mm,5m 1 S.AC413 2201-000556 C-CERAMIC,DISC 0.47NF,10%,500V,Y5P,TP,5. 1 S.AC414 2301-001083 C-FILM,LEAD-PPF 27nF,5%,400V,TP,20x7.5x1 1 S.AC415 2301-001067 C-FILM,LEAD-PPF 82nF,5%,400V,TP,19x15.5x 1 S.AC417 2202-000796 C-CERAMIC,MLC-AXIAL 1NF,10%,50V,Y5P,TP,3 1 S.AC424 2201-000132 C-CERAMIC,DISC 0.1NF,10%,500V,Y5P,TP,6.5 1 S.AC499 2305-000237 C-FILM,LEAD-PEF 1uF,5%,63V,TP,7.5x15.5mm 1 S.AC511 2401-000553 C-AL 1uF,10%,50V,GP,TP,5x11,5 1 S.AC601 2401-001914 C-AL 1uF,20%,50V,BP,TP,5x11,5 1 S.AC602 2401-001914 C-AL 1uF,20%,50V,BP,TP,5x11,5 1 S.AC607 2202-000231 C-CERAMIC,MLC-AXIAL 0.33NF,10%,50V,Y5P,T 1 S.AC608 2202-000231 C-CERAMIC,MLC-AXIAL 0.33NF,10%,50V,Y5P,T 1 S.AC610 2301-000289 C-FILM,LEAD-PEF 5.6nF,5%,50V,TP,7x6x3mm, 1 S.AC611 2301-000289 C-FILM,LEAD-PEF 5.6nF,5%,50V,TP,7x6x3mm, 1 S.AC612 2401-000649 C-AL 2.2uF,20%,50V,BP,TP,5x11,5 1 S.AC613 2401-000649 C-AL 2.2uF,20%,50V,BP,TP,5x11,5 1 S.AC617 2401-000553 C-AL 1uF,10%,50V,GP,TP,5x11,5 1 S.AC620 2305-000665 C-FILM,LEAD-PEF 100nF,5%,63V,TP,7.5x4.0x 1 S.AC621 2401-001998 C-AL 1000uF,20%,25V,GP,TP,10x20,5mm 1 S.AC623 2202-000231 C-CERAMIC,MLC-AXIAL 0.33NF,10%,50V,Y5P,T 1 S.AC624 2202-000231 C-CERAMIC,MLC-AXIAL 0.33NF,10%,50V,Y5P,T 1 S.AC627 2202-000231 C-CERAMIC,MLC-AXIAL 0.33NF,10%,50V,Y5P,T 1 S.AC629 2202-000231 C-CERAMIC,MLC-AXIAL 0.33NF,10%,50V,Y5P,T 1 S.AC638 2202-000231 C-CERAMIC,MLC-AXIAL 0.33NF,10%,50V,Y5P,T 1 S.AC642 2202-000231 C-CERAMIC,MLC-AXIAL 0.33NF,10%,50V,Y5P,T 1 S.AC643 2202-000231 C-CERAMIC,MLC-AXIAL 0.33NF,10%,50V,Y5P,T 1 S.AC644 2202-000231 C-CERAMIC,MLC-AXIAL 0.33NF,10%,50V,Y5P,T 1 S.AC701 2202-000796 C-CERAMIC,MLC-AXIAL 1NF,10%,50V,Y5P,TP,3 1 S.AC702 2202-000796 C-CERAMIC,MLC-AXIAL 1NF,10%,50V,Y5P,TP,3 1 S.AC703 2202-000121 C-CERAMIC,MLC-AXIAL 0.1nF,10%,50V,Y5P,-, 1 S.AC704 2202-000121 C-CERAMIC,MLC-AXIAL 0.1nF,10%,50V,Y5P,-, 1 S.AC705 2202-000121 C-CERAMIC,MLC-AXIAL 0.1nF,10%,50V,Y5P,-, 1 S.AC713 2202-000632 C-CERAMIC,MLC-AXIAL 100nF,20%,50V,Z5U,TP 1 S.AC715 2202-000632 C-CERAMIC,MLC-AXIAL 100nF,20%,50V,Z5U,TP 1 S.AC717 2202-000632 C-CERAMIC,MLC-AXIAL 100nF,20%,50V,Z5U,TP 1 S.AC719 2202-000632 C-CERAMIC,MLC-AXIAL 100nF,20%,50V,Z5U,TP 1 S.AC721 2401-000660 C-AL 2.2uF,20%,50V,GP,TP,5x11,5 1 S.AC722 2401-000660 C-AL 2.2uF,20%,50V,GP,TP,5x11,5 1 S.AC725 2202-000632 C-CERAMIC,MLC-AXIAL 100nF,20%,50V,Z5U,TP 1 S.AC800 2401-001652 C-AL 680uF,20%,250V,GP,BK,25x50mm,1 1 S.AC801 2301-000383 C-FILM,LEAD-PEF 10nF,5%,50V,TP,6x7x3.2mm 1 S.AC803 2401-001652 C-AL 680uF,20%,250V,GP,BK,25x50mm,1 1 S.AC807 2301-001342 C-FILM,LEAD-PPF 1.5nF,5%,800V,TP,15x6.5x 1 S.AC808 2401-003046 C-AL 47uF,20%,50V,WT,TP,6.3x11,2.5 1 S.AC809 2301-000108 C-FILM,LEAD-PEF 1.5nF,5%,50V,TP,6.5x3.0x 1 S.AC810 2301-000383 C-FILM,LEAD-PEF 10nF,5%,50V,TP,6x7x3.2mm 1 S.AC811 2401-002463 C-AL 470uF,20%,16V,GP,TP,8x11.5,5 1 S.AC812 2401-002075 C-AL 4.7uF,20%,50V,GP,TP,5x11,5 1 S.AC815 2401-003224 C-AL 470uF,20%,16V,WT,TP,8X11.5,5mm 1 S.AC817 2401-000703 C-AL 2200uF,20%,25V,GP,-,12.5x25mm, 1 S.AC818 2201-000556 C-CERAMIC,DISC 0.47NF,10%,500V,Y5P,TP,5. 1 S.AC819 2401-003139 C-AL 1000uF,20%,25V,WT,TP,10*20,5mm 1 S.AC820 2201-000406 C-CERAMIC,DISC 0.27NF,10%,2KV,Y5P,TP,6.3 1 S.AC821 2401-000262 C-AL 100uF,20%,160V,HR,TP,16x25,7.5 1 S.AC822 2401-000262 C-AL 100uF,20%,160V,HR,TP,16x25,7.5 1 S.AC823 2201-000291 C-CERAMIC,DISC 1NF,10%,500V,Y5P,TP,7.5X3 1 S.AC824 2305-000289 C-FILM,LEAD-PEF 220nF,5%,63V,TP,-,5mm 1 S.AC826 2301-001194 C-FILM,LEAD-PPF 470nF,5%,250V,TP,18x16x8 1 S.AC828 2201-000374 C-CERAMIC,DISC 0.22NF,5%,50V,C0G,TP,10.5 1 S.AC844 2301-000356 C-FILM,LEAD-PEF 47nF,5%,50V,TP,7.5x4.0x6 1 S.AC845 2201-000599 C-CERAMIC,DISC 0.56NF,10%,500V,Y5P,TP,5. 1 S.AC846 2401-000698 C-AL 2200uF,20%,16V,WT,TP,12.5x25,5 1 S.AC888 2201-000556 C-CERAMIC,DISC 0.47NF,10%,500V,Y5P,TP,5. 1 S.AC901 2401-002144 C-AL 47uF,20%,16V,GP,TP,5x11,5 1 S.AC902 2202-000796 C-CERAMIC,MLC-AXIAL 1NF,10%,50V,Y5P,TP,3 1 S.AC903 2401-003036 C-AL 100uF,20%,16V,GP,TP,5X11mm,5mm 1 S.AC904 2202-000632 C-CERAMIC,MLC-AXIAL 100nF,20%,50V,Z5U,TP 1 S.AC905 2401-002463 C-AL 470uF,20%,16V,GP,TP,8x11.5,5 1 S.A


Samsung Electronics5-2




C906 2401-000480 C-AL 10uF,20%,50V,GP,TP,5x11,5 1 S.AC907 2202-000632 C-CERAMIC,MLC-AXIAL 100nF,20%,50V,Z5U,TP 1 S.AC909 2202-000632 C-CERAMIC,MLC-AXIAL 100nF,20%,50V,Z5U,TP 1 S.AC911 2202-000632 C-CERAMIC,MLC-AXIAL 100nF,20%,50V,Z5U,TP 1 S.AC912 2401-000480 C-AL 10uF,20%,50V,GP,TP,5x11,5 1 S.AC913 2202-000632 C-CERAMIC,MLC-AXIAL 100nF,20%,50V,Z5U,TP 1 S.AC914 2202-000632 C-CERAMIC,MLC-AXIAL 100nF,20%,50V,Z5U,TP 1 S.AC915 2401-003036 C-AL 100uF,20%,16V,GP,TP,5X11mm,5mm 1 S.AC916 2202-000632 C-CERAMIC,MLC-AXIAL 100nF,20%,50V,Z5U,TP 1 S.AC917 2202-000632 C-CERAMIC,MLC-AXIAL 100nF,20%,50V,Z5U,TP 1 S.AC918 2401-003036 C-AL 100uF,20%,16V,GP,TP,5X11mm,5mm 1 S.AC919 2401-003036 C-AL 100uF,20%,16V,GP,TP,5X11mm,5mm 1 S.AC920 2202-000632 C-CERAMIC,MLC-AXIAL 100nF,20%,50V,Z5U,TP 1 S.AC921 2401-003036 C-AL 100uF,20%,16V,GP,TP,5X11mm,5mm 1 S.AC922 2401-003578 C-AL 1000uF,20%,10V,GP,TP,8x20mm,5 1 S.AC924 2202-000632 C-CERAMIC,MLC-AXIAL 100nF,20%,50V,Z5U,TP 1 S.AC925 2401-000493 C-AL 10uF,20%,50V,LZ,TP,5x11mm,5mm 1 S.AC926 2202-000632 C-CERAMIC,MLC-AXIAL 100nF,20%,50V,Z5U,TP 1 S.AC927 2401-003036 C-AL 100uF,20%,16V,GP,TP,5X11mm,5mm 1 S.AC928 2301-000342 C-FILM,LEAD-PEF 2.2nF,5%,50V,TP,7.4x3.9x 1 S.AC929 2301-000445 C-FILM,LEAD-PEF 4.7nF,5%,50V,TP,5.5x7x3m 1 S.AC930 2401-000553 C-AL 1uF,10%,50V,GP,TP,5x11,5 1 S.AC931 2202-000632 C-CERAMIC,MLC-AXIAL 100nF,20%,50V,Z5U,TP 1 S.ACIS1 0205-001154 OIL-SILICON G746,-,- 0.1 S.N.ACIS1 0205-001154 OIL-SILICON G746,-,- 0.2 S.N.ACIS1 0205-001154 OIL-SILICON G746,-,- 0.2 S.N.ACIS1 0205-001154 OIL-SILICON G746,-,- 0.1 S.N.ACIS1 0205-001154 OIL-SILICON G746,-,- 0.1 S.N.ACIS1 0205-001154 OIL-SILICON G746,-,- 0.2 S.N.ACIS3 AA40-00076A TUNER TECC0949PG35A(S),PAL,181CH,38.9MHZ 1 S.ACN330 3711-003043 HEADER-BOARD TO CABLE BOX,4P,1R,2.5MM,ST 1 S.ACN330 3711-002644 HEADER-BOARD TO CABLE BOX,5P,1R,2.5mm,ST 1 S.ACN330 3711-002644 HEADER-BOARD TO CABLE BOX,5P,1R,2.5mm,ST 1 S.ACN330 3711-002647 HEADER-BOARD TO CABLE BOX,8P,1R,2.5mm,ST 1 S.ACN330 3711-002648 HEADER-BOARD TO CABLE BOX,9P,1R,2.5mm,ST 1 S.ACN909 AA37-00001A CONNECTOR-FBT FIX PIN JM-3500,CPTTV,0.36 1 S.ACN909 AA37-00001A CONNECTOR-FBT FIX PIN JM-3500,CPTTV,0.36 1 S.ACP401 2201-000132 C-CERAMIC,DISC 0.1NF,10%,500V,Y5P,TP,6.5 1 S.ACR402S 2306-000329 C-FILM,LEAD-PPF 7NF,3%,1.6KV,BK,28.5X18. 1 S.ACR403S 2306-000329 C-FILM,LEAD-PPF 7NF,3%,1.6KV,BK,28.5X18. 1 S.ACR405S 2303-000296 C-FILM,LEAD-PPF 18nF,5%,630V,BK,20x16x9. 1 S.ACR406S 2306-001004 C-FILM,LEAD-PPF 300nF,5%,400V,BK,26x14x2 1 S.ACX801S 2306-000318 C-FILM,LEAD-PPF 220nF,20%,275V,BK,26x7x1 1 S.ACY802S 2201-000446 C-CERAMIC,DISC 3.3NF,20%,400V,Y5U,BK,15X 1 S.AD101 0401-000005 DIODE-SWITCHING 1N4148,75V,150mA,DO-35,T 1 S.AD103 0401-000005 DIODE-SWITCHING 1N4148,75V,150mA,DO-35,T 1 S.AD201 0401-000005 DIODE-SWITCHING 1N4148,75V,150mA,DO-35,T 1 S.AD303 0402-000546 DIODE-RECTIFIER TVR10G,400V,1A,DO-41,TP 1 S.AD401 0402-000537 DIODE-RECTIFIER RH1A,600V,0.6A,DO-204AC, 1 S.AD402 0402-000132 DIODE-RECTIFIER 1N4004,400V,1A,DO-41,TP 1 S.AD403 0402-000132 DIODE-RECTIFIER 1N4004,400V,1A,DO-41,TP 1 S.AD404 0402-001599 DIODE-RECTIFIER DGP30L,1500,3A,DO-201AD( 1 S.AD405 0402-000534 DIODE-RECTIFIER RG10V,400V,1.2A,DO-201,T 1 S.AD406 0402-000540 DIODE-RECTIFIER RU20A,600V,1.5A,-,TP 1 S.AD407 0402-000540 DIODE-RECTIFIER RU20A,600V,1.5A,-,TP 1 S.AD408 0402-001295 DIODE-RECTIFIER GUR460L-5700,600V,4A,DO- 1 S.AD409 0401-000005 DIODE-SWITCHING 1N4148,75V,150mA,DO-35,T 1 S.AD510 0401-000005 DIODE-SWITCHING 1N4148,75V,150mA,DO-35,T 1 S.AD511 0401-000005 DIODE-SWITCHING 1N4148,75V,150mA,DO-35,T 1 S.AD512 0401-000005 DIODE-SWITCHING 1N4148,75V,150mA,DO-35,T 1 S.AD513 0401-000005 DIODE-SWITCHING 1N4148,75V,150mA,DO-35,T 1 S.AD606 0401-000005 DIODE-SWITCHING 1N4148,75V,150mA,DO-35,T 1 S.AD630 0401-000005 DIODE-SWITCHING 1N4148,75V,150mA,DO-35,T 1 S.AD801S 0402-001477 DIODE-BRIDGE GSIB460,600V,4A,SIP-4,ST 1 S.AD803 0402-000546 DIODE-RECTIFIER TVR10G,400V,1A,DO-41,TP 1 S.AD804 0401-000006 DIODE-SWITCHING BAV21,250V,200mA,DO-35,T 1 S.AD805 0401-000006 DIODE-SWITCHING BAV21,250V,200mA,DO-35,T 1 S.AD807 0402-001604 DIODE-RECTIFIER MUR420,200V,4A,DO-201AD, 1 S.A


D809A 0402-001374 DIODE-RECTIFIER FFPF06U20S,200V,6A,TO-22 1 S.AD811 0402-001603 DIODE-RECTIFIER MUR480E,800V,4A,DO-201AD 1 S.AD813 0402-000493 DIODE-RECTIFIER 1R5GU41,400V,1.5A,DO-15L 1 S.ADZ242 0403-001373 DIODE-ZENER MTZJ5.1A,4.85-5.03V,500mW,DO 1 S.ADZ301 0403-001329 DIODE-ZENER MTZJ24B,22.75-23.73V,500mW,D 1 S.ADZ302 0403-001329 DIODE-ZENER MTZJ24B,22.75-23.73V,500mW,D 1 S.ADZ303 0403-001221 DIODE-ZENER UZ39BSB,35.36-37.19V,500mW,D 1 S.ADZ305 0403-001329 DIODE-ZENER MTZJ24B,22.75-23.73V,500mW,D 1 S.ADZ306 0403-000700 DIODE-ZENER TZP33A,5%,1000mW,DO-41,TP 1 S.ADZ403 0401-000005 DIODE-SWITCHING 1N4148,75V,150mA,DO-35,T 1 S.ADZ510 0403-000716 DIODE-ZENER MTZJ4.7B,4.59-4.77V,500mW,DO 1 S.ADZ605 0403-000714 DIODE-ZENER MTZJ3.3B,3.32-3.53V,500mW,DO 1 S.ADZ701 0403-000720 DIODE-ZENER MTZJ9.1B,8.57-9.01V,500mW,DO 1 S.ADZ702 0403-000720 DIODE-ZENER MTZJ9.1B,8.57-9.01V,500mW,DO 1 S.ADZ703 0403-000720 DIODE-ZENER MTZJ9.1B,8.57-9.01V,500mW,DO 1 S.ADZ704 0403-000720 DIODE-ZENER MTZJ9.1B,8.57-9.01V,500mW,DO 1 S.ADZ802 0403-000717 DIODE-ZENER MTZJ5.1B,4.94-5.2V,500mW,DO- 1 S.ADZ807 0403-000718 DIODE-ZENER MTZJ6.8B,6.52-6.79V,500mW,DO 1 S.ADZ810 0403-000509 DIODE-ZENER MTZJ5.6B,5.4-5.7V,500mW,DO-3 1 S.ADZ811 0403-000700 DIODE-ZENER TZP33A,5%,1000mW,DO-41,TP 1 S.ADZ812 0403-000700 DIODE-ZENER TZP33A,5%,1000mW,DO-41,TP 1 S.ADZ813 0403-000720 DIODE-ZENER MTZJ9.1B,8.57-9.01V,500mW,DO 1 S.ADZ814 0403-001320 DIODE-ZENER MTZJ6.2C,6.16-6.4V,500mW,DO- 1 S.ADZ815 0403-001321 DIODE-ZENER MTZJ6.8C,6.7-6.97V,500mW,DO- 1 S.ADZ816 0401-000005 DIODE-SWITCHING 1N4148,75V,150mA,DO-35,T 1 S.ADZ818 0403-000720 DIODE-ZENER MTZJ9.1B,8.57-9.01V,500mW,DO 1 S.ADZ819 0403-000714 DIODE-ZENER MTZJ3.3B,3.32-3.53V,500mW,DO 1 S.ADZ901 0403-000719 DIODE-ZENER MTZJ7.5B,7.11-7.44V,500mW,DO 1 S.ADZ902 0403-000719 DIODE-ZENER MTZJ7.5B,7.11-7.44V,500mW,DO 1 S.ADZ903 0403-000717 DIODE-ZENER MTZJ5.1B,4.94-5.2V,500mW,DO- 1 S.ADZ905 0403-001317 DIODE-ZENER MTZJ3.0B,3.01-3.22V,500mW,DO 1 S.AEL801 6042-000001 EYELET ID2.2,OD2.7,L3.1,NI+SN,BSP3-1/2H 1 S.N.AEL802 6042-000001 EYELET ID2.2,OD2.7,L3.1,NI+SN,BSP3-1/2H 1 S.N.AEL805 6042-000001 EYELET ID2.2,OD2.7,L3.1,NI+SN,BSP3-1/2H 1 S.N.AEL806 6042-000001 EYELET ID2.2,OD2.7,L3.1,NI+SN,BSP3-1/2H 1 S.N.AEL807 6042-000001 EYELET ID2.2,OD2.7,L3.1,NI+SN,BSP3-1/2H 1 S.N.AEL808 6042-000001 EYELET ID2.2,OD2.7,L3.1,NI+SN,BSP3-1/2H 1 S.N.AEL844 6042-000001 EYELET ID2.2,OD2.7,L3.1,NI+SN,BSP3-1/2H 1 S.N.AEL845 6042-000001 EYELET ID2.2,OD2.7,L3.1,NI+SN,BSP3-1/2H 1 S.N.AEY600 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY601 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY602 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY603 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY801 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY802 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY803 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY804 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY805 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY807 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY810 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY838 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY839 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY840 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY841 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY842 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY843 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY846 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY847 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY848 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY849 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY850 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY851 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY852 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY853 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY854 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY855 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY856 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY858 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.A






EY859 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY863 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY864 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY865 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY866 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY867 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY868 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY869 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY870 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY871 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY872 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY873 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY874 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY875 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY876 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY877 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY878 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY879 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY880 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY881 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY882 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY883 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY884 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY885 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY886 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY887 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY888 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY889 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY890 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY891 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY892 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY894 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY895 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY896 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY897 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AEY898 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H 1 S.AF101 2901-000297 FILTER-EMI ON BOARD -,3A,-,3.5x5mm,TP,- 1 S.AF101 2901-000297 FILTER-EMI ON BOARD -,3A,-,3.5x5mm,TP,- 1 S.AF101 2901-000297 FILTER-EMI ON BOARD -,3A,-,3.5x5mm,TP,- 1 S.AF101 2901-000297 FILTER-EMI ON BOARD -,3A,-,3.5x5mm,TP,- 1 S.AF801A 3602-000001 FUSE-CLIP -,-,30mohm 1 S.AF801B 3602-000001 FUSE-CLIP -,-,30mohm 1 S.AFD801A 3601-001163 FUSE-AXIAL LEAD 125V,7A,-,EPOXY,2.4X7.1M 1 S.AFD802 3601-000281 FUSE-CARTRIDGE 250V,4A,TIME-LAG,GLASS,5. 1 S.AFD802S 3601-001163 FUSE-AXIAL LEAD 125V,7A,-,EPOXY,2.4X7.1M 1 S.AGT101 BH71-40300A PIN-HINGE BRASS,D2.36!,HEAT/SINK,SN 1 S.N.AGT103 BH71-40300A PIN-HINGE BRASS,D2.36!,HEAT/SINK,SN 1 S.N.AGT301 AA60-40012F PIN-GT 4P,2.36PI,6/12/14mm,NYLON66,LOCKI 1 S.N.AGT404 BH71-40300A PIN-HINGE BRASS,D2.36!,HEAT/SINK,SN 1 S.N.AGT801 AA60-40012G PIN-GT 3P,2.36PI,10/5mm,NYLON66,LOCKING 1 S.N.AGT804 BH71-40300A PIN-HINGE BRASS,D2.36!,HEAT/SINK,SN 1 S.N.AGT805 BH71-40300A PIN-HINGE BRASS,D2.36!,HEAT/SINK,SN 1 S.N.AGT806 BH71-40300A PIN-HINGE BRASS,D2.36!,HEAT/SINK,SN 1 S.N.AH/S AA61-01390A BRACKET CT-29A20HR,SECC,T1.0 1 S.N.AIC012 1203-001217 IC-POSI.ADJUST REG. 431,TO-92,3P,4.58MIL 1 S.AIC063 AA13-00116A IC HYBRID STR-W6750F,6,-20 to +115,TO-3P 1 S.AIC063 AA13-20004W IC HYBRID -,PAP103T,SIP,6P,PRE-AMP,TP 1 S.AIC112 1103-001211 IC-EEPROM 24C16,2Kx8Bit,DIP,8P,10.16x7.1 1 S.AIC201S AA09-00503A IC MICOM MTP TDA12025PQ/N1F80-MTP,CS21K1 1 S.N.AIC301 BP96-00712B ASSY HEAT SINK P BP62-00063A,6003-000334 1 S.N.AIC602 AA96-02124A ASSY HEAT SINK P AA62-30182G,SCREW,TDA72 1 S.N.AIC801S AA96-50371T ASSY HEAT SINK P AA62-30181H,SCREW,STR-W 1 S.N.AIC802 AA96-00243T ASSY HEAT SINK P AA62-00045A,KA78R08,TVD 1 S.N.AJ618 2001-000864 R-CARBON 56KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AJA701 3722-000195 JACK-SCART 42P,SN,BLK 1 S.AL101 2701-000114 INDUCTOR-AXIAL 10UH,10%,2534 1 S.AL102 2701-000114 INDUCTOR-AXIAL 10UH,10%,2534 1 S.AL103 2701-000202 INDUCTOR-AXIAL 0.56UH,10%,2534 1 S.A


L107 2701-000159 INDUCTOR-AXIAL 22UH,10%,4298 1 S.AL110 2001-000281 R-CARBON 100OHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AL199 2001-000281 R-CARBON 100OHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AL201 2701-000114 INDUCTOR-AXIAL 10UH,10%,2534 1 S.AL202 2001-000793 R-CARBON 47OHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AL204 2701-000114 INDUCTOR-AXIAL 10UH,10%,2534 1 S.AL2514 3301-000287 BEAD-AXIAL ,3.5x1.0x6.0mm,3000mA,TP,,,50 1 S.N.AL2514 3301-000287 BEAD-AXIAL ,3.5x1.0x6.0mm,3000mA,TP,,,50 1 S.N.AL2514 3301-000287 BEAD-AXIAL ,3.5x1.0x6.0mm,3000mA,TP,,,50 1 S.N.AL2514 3301-000287 BEAD-AXIAL ,3.5x1.0x6.0mm,3000mA,TP,,,50 1 S.N.AL2514 3301-000287 BEAD-AXIAL ,3.5x1.0x6.0mm,3000mA,TP,,,50 1 S.N.AL2514 3301-000287 BEAD-AXIAL ,3.5x1.0x6.0mm,3000mA,TP,,,50 1 S.N.AL2514 3301-000287 BEAD-AXIAL ,3.5x1.0x6.0mm,3000mA,TP,,,50 1 S.N.AL2514 3301-000287 BEAD-AXIAL ,3.5x1.0x6.0mm,3000mA,TP,,,50 1 S.N.AL303B 2701-001030 INDUCTOR-AXIAL 43UH,10%,4514 1 S.AL424 2701-000142 INDUCTOR-AXIAL 1UH,10%,2534 1 S.AL607 2701-000180 INDUCTOR-AXIAL 33UH,5%,2534 1 S.AL608 2701-000180 INDUCTOR-AXIAL 33UH,5%,2534 1 S.AL701 2701-000180 INDUCTOR-AXIAL 33UH,5%,2534 1 S.AL702 2701-000180 INDUCTOR-AXIAL 33UH,5%,2534 1 S.AL703 2701-000142 INDUCTOR-AXIAL 1UH,10%,2534 1 S.AL704 2701-000142 INDUCTOR-AXIAL 1UH,10%,2534 1 S.AL705 2701-000180 INDUCTOR-AXIAL 33UH,5%,2534 1 S.AL706 2701-000180 INDUCTOR-AXIAL 33UH,5%,2534 1 S.AL707 2701-000142 INDUCTOR-AXIAL 1UH,10%,2534 1 S.AL808 2701-001030 INDUCTOR-AXIAL 43UH,10%,4514 1 S.AL902 2701-000114 INDUCTOR-AXIAL 10UH,10%,2534 1 S.AL903 2701-000114 INDUCTOR-AXIAL 10UH,10%,2534 1 S.AL906 2701-000114 INDUCTOR-AXIAL 10UH,10%,2534 1 S.AL907 2701-000114 INDUCTOR-AXIAL 10UH,10%,2534 1 S.AL908 2701-000114 INDUCTOR-AXIAL 10UH,10%,2534 1 S.AL909 2701-000114 INDUCTOR-AXIAL 10UH,10%,2534 1 S.AL910 2701-000114 INDUCTOR-AXIAL 10UH,10%,2534 1 S.AL911 2701-000114 INDUCTOR-AXIAL 10UH,10%,2534 1 S.ALD901 AA96-01710A ASSY MISC P-LED GUIDE LTL-307JGTH128R 1 S.N.ALX801S AA29-00015A FILTER LINE NOISE WS32W8,28-20MH 1.5A,+- 1 S.AM0014 AA97-16670A ASSY AUTO-MAIN CW21Z403NCXXEC,TH,ELDOR 1 S.N.AM0018 AA97-16529A ASSY MICOM T-HITPEU-1706,S16C,TDA12025PQ 1 S.AM0081 6003-000115 SCREW-TAPTITE BH,+,B,M3,L6,ZPC(BLK),SWRC 1 S.AM0081 6003-000333 SCREW-TAPTITE RH,+,2S,M3,L10,ZPC(YEL),SW 1 S.N.AM0081 6003-000333 SCREW-TAPTITE RH,+,2S,M3,L10,ZPC(YEL),SW 1 S.N.AM0081 6003-000333 SCREW-TAPTITE RH,+,2S,M3,L10,ZPC(YEL),SW 1 S.N.AM0081 6003-000115 SCREW-TAPTITE BH,+,B,M3,L6,ZPC(BLK),SWRC 1 S.AM0081 6003-000333 SCREW-TAPTITE RH,+,2S,M3,L10,ZPC(YEL),SW 1 S.N.AP803T 1404-001265 THERMISTOR-PTC 4.5OHM/100OHM,+30/-20%,22 1 S.APC801S 0604-001032 PHOTO-COUPLER TR,170-260%,300mW,DIP-4,ST 1 S.AQ102 0501-000389 TR-SMALL SIGNAL KSC815,NPN,400mW,TO-92,T 1 S.AQ207 0501-000283 TR-SMALL SIGNAL KSA539,PNP,400mW,TO-92,T 1 S.AQ261 0501-000283 TR-SMALL SIGNAL KSA539,PNP,400mW,TO-92,T 1 S.AQ262 0501-000389 TR-SMALL SIGNAL KSC815,NPN,400mW,TO-92,T 1 S.AQ272 0501-000283 TR-SMALL SIGNAL KSA539,PNP,400mW,TO-92,T 1 S.AQ273 0501-000389 TR-SMALL SIGNAL KSC815,NPN,400mW,TO-92,T 1 S.AQ401 AA96-02906D ASSY HEAT SINK P AA62-00145A,6003-000333 1 S.N.AQ403 0501-000369 TR-SMALL SIGNAL KSC2331-Y,NPN,1000mW,TO- 1 S.AQ404 AA96-00624G ASSY HEAT SINK P SCREW,AA62-00057B,FQP63 1 S.N.AQ409 0505-001723 FET-SILICON FQP630TSTU,N,200V,9A,0.4OHM, 1 S.AQ501 0501-000389 TR-SMALL SIGNAL KSC815,NPN,400mW,TO-92,T 1 S.AQ502 0501-000389 TR-SMALL SIGNAL KSC815,NPN,400mW,TO-92,T 1 S.AQ805 0501-000389 TR-SMALL SIGNAL KSC815,NPN,400mW,TO-92,T 1 S.AQ806 0501-000389 TR-SMALL SIGNAL KSC815,NPN,400mW,TO-92,T 1 S.AQ902 0501-000389 TR-SMALL SIGNAL KSC815,NPN,400mW,TO-92,T 1 S.AQ903 0501-000283 TR-SMALL SIGNAL KSA539,PNP,400mW,TO-92,T 1 S.AQ904 0501-000283 TR-SMALL SIGNAL KSA539,PNP,400mW,TO-92,T 1 S.AQ905 0501-000389 TR-SMALL SIGNAL KSC815,NPN,400mW,TO-92,T 1 S.AR101 2001-000281 R-CARBON 100OHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR102 2001-000290 R-CARBON 10KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR106 2001-000947 R-CARBON 7.5KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR108 2001-000331 R-CARBON 12KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.A






R109 2001-000786 R-CARBON 47KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR111 2001-000780 R-CARBON 470OHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR123 2001-000281 R-CARBON 100OHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR124 2001-000515 R-CARBON 220OHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR126 2001-000429 R-CARBON 1KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR129 2001-000429 R-CARBON 1KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR130 2001-000290 R-CARBON 10KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR163 2001-000005 R-CARBON 390ohm,5%,1/8W,AA,TP,1.8x3.2mm 1 S.AR164 2001-000281 R-CARBON 100OHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR165 2001-000281 R-CARBON 100OHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR167 2001-000924 R-CARBON 680OHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR169 2004-001914 R-METAL 39Kohm,2%,1/8W,AA,TP,1.8x3.5mm 1 S.AR201 2001-000515 R-CARBON 220OHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR205 2001-000613 R-CARBON 3.9KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR210 2001-000878 R-CARBON 6.2KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR211 2001-000857 R-CARBON 560OHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR213 2001-000734 R-CARBON 4.7KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR215 2001-000281 R-CARBON 100OHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR216 2001-000281 R-CARBON 100OHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR217 2001-000281 R-CARBON 100OHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR218 2001-000290 R-CARBON 10KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR262 2001-000429 R-CARBON 1KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR263 2001-000429 R-CARBON 1KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR264 2001-000429 R-CARBON 1KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR271 2001-000938 R-CARBON 68OHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR276 2001-000429 R-CARBON 1KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR300 2001-000734 R-CARBON 4.7KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR301 2001-000281 R-CARBON 100OHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR302 2004-004097 R-METAL 1.6Kohm,2%,1/2W,AA,TP,2.4X6.4mm 1 S.AR303 2003-002070 R-METAL OXIDE 1ohm,5%,2W,AF,TP,3.9x10mm 1 S.AR304 2008-001015 R-FUSIBLE(S) 1.5ohm,5%,2W,AF,TP,3.9x10mm 1 S.AR305 2004-001371 R-METAL(S) 1.5Kohm,1%,1/2W,AA,TP,2.4x6.4 1 S.AR306 2001-000016 R-CARBON(S) 1OHM,5%,1/2W,AA,TP,2.4X6.4MM 1 S.AR307 2001-000281 R-CARBON 100OHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR309 2003-002205 R-METAL OXIDE(S) 330ohm,5%,2W,AG,TP,3.9X 1 S.AR310 2003-002205 R-METAL OXIDE(S) 330ohm,5%,2W,AG,TP,3.9X 1 S.AR311 2001-000290 R-CARBON 10KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR401 2001-001165 R-CARBON(S) 56OHM,5%,1/2W,AA,TP,2.4X6.4M 1 S.AR402 2001-001070 R-CARBON(S) 120OHM,5%,1/2W,AA,TP,2.4X6.4 1 S.AR403 2004-005059 R-METAL(S) 2.7KOHM,1%,1/2W,AA,TP,6.4X2.4 1 S.AR404 2001-001114 R-CARBON(S) 270OHM,5%,1/2W,AA,TP,2.4X6.4 1 S.AR405 2001-000020 R-CARBON(S) 22OHM,5%,1/2W,AA,TP,2.4X6.4M 1 S.AR406 2001-000028 R-CARBON(S) 100OHM,5%,1/2W,AA,TP,2.4X6.4 1 S.AR407 2003-002193 R-METAL OXIDE(S) 33Kohm,5%,2W,AG,TP,3.9X 1 S.AR408 2004-001390 R-METAL(S) 1Kohm,2%,1/2W,AA,TP,2.4x6.4mm 1 S.AR409 2001-001086 R-CARBON(S) 18KOHM,5%,1/2W,AA,TP,2.4X6.4 1 S.AR410 2001-001115 R-CARBON(S) 27KOHM,5%,1/2W,AA,TP,2.4X6.4 1 S.AR411 2004-001099 R-METAL 56Kohm,1%,1/4W,AA,TP,2.4x6.4mm 1 S.AR413 2008-000253 R-FUSIBLE(S) 0.47ohm,5%,1W,AF,TP,3.9x10m 1 S.AR414 2008-000264 R-FUSIBLE(S) 1ohm,5%,1W,AF,TP,3.9x10mm 1 S.AR418 2008-000266 R-FUSIBLE(S) 1ohm,5%,2W,AF,TP,3.9x10mm 1 S.AR419 2001-000281 R-CARBON 100OHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR422 2001-000331 R-CARBON 12KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR423 2003-001042 R-METAL OXIDE(S) 5.6Kohm,5%,2W,AF,TP,3.9 1 S.AR424 2001-000012 R-CARBON 680KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR425 2004-000433 R-METAL 1Kohm,1%,1/8W,AA,TP,1.8x3.2mm 1 S.AR426 2003-002288 R-METAL OXIDE(S) 2.2KOHM,5%,2W,AF,TP,3.9 1 S.AR427 2001-000786 R-CARBON 47KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR428 2001-000258 R-CARBON 1.8KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR429 2001-000563 R-CARBON 27KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR450 2008-001135 R-FUSIBLE(S) 3.9ohm,5%,1W,AF,TP,3.9x10mm 1 S.AR520 2001-000734 R-CARBON 4.7KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR521 2001-000679 R-CARBON 36KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR522 2001-000734 R-CARBON 4.7KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR523 2001-000734 R-CARBON 4.7KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR606 2001-000837 R-CARBON 51KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR607 2001-000290 R-CARBON 10KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR608 2001-000290 R-CARBON 10KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.A


R609 2001-000281 R-CARBON 100OHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR620 2001-000290 R-CARBON 10KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR621 2001-000429 R-CARBON 1KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR622 2001-000429 R-CARBON 1KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR623 2001-000290 R-CARBON 10KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR701 2001-000969 R-CARBON 75OHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR702 2001-000969 R-CARBON 75OHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR703 2001-000969 R-CARBON 75OHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR704 2001-000969 R-CARBON 75OHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR706 2001-000734 R-CARBON 4.7KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR707 2001-000734 R-CARBON 4.7KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR708 2001-000734 R-CARBON 4.7KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR709 2001-000734 R-CARBON 4.7KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR710 2001-000938 R-CARBON 68OHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR711 2001-000969 R-CARBON 75OHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR713 2001-000969 R-CARBON 75OHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR715 2001-000290 R-CARBON 10KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR716 2001-000290 R-CARBON 10KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR717 2001-000702 R-CARBON 39KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR718 2001-000702 R-CARBON 39KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR719 2001-000812 R-CARBON 5.6KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR720 2001-000812 R-CARBON 5.6KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR721 2001-000812 R-CARBON 5.6KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR722 2001-000812 R-CARBON 5.6KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR726 2001-000281 R-CARBON 100OHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR727 2001-000281 R-CARBON 100OHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR730 2001-000281 R-CARBON 100OHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR802 2003-000586 R-METAL OXIDE(S) 22Kohm,5%,2W,AF,TP,4x12 1 S.AR803 2003-000586 R-METAL OXIDE(S) 22Kohm,5%,2W,AF,TP,4x12 1 S.AR804 2003-000586 R-METAL OXIDE(S) 22Kohm,5%,2W,AF,TP,4x12 1 S.AR805 2001-001088 R-CARBON(S) 1KOHM,5%,1/2W,AA,TP,2.4X6.4M 1 S.AR807 2001-000037 R-CARBON(S) 330OHM,5%,1/2W,AA,TP,2.4X6.4 1 S.AR808 2001-001150 R-CARBON(S) 470KOHM,5%,1/2W,AA,TP,2.4X6. 1 S.AR809 2001-001150 R-CARBON(S) 470KOHM,5%,1/2W,AA,TP,2.4X6. 1 S.AR810 2001-001097 R-CARBON(S) 2.4KOHM,5%,1/2W,AA,TP,2.4X6. 1 S.AR813 2009-001011 R-METAL PLATE 0.18ohm,10%,5W,CL,TP,5x14x 1 S.AR816 2004-001891 R-METAL(S) 133Kohm,1%,1/2W,AA,TP,2.5x6.5 1 S.AR817 2001-001088 R-CARBON(S) 1KOHM,5%,1/2W,AA,TP,2.4X6.4M 1 S.AR818 2001-001131 R-CARBON(S) 33KOHM,5%,1/2W,AA,TP,2.4X6.4 1 S.AR819 2004-001983 R-METAL(S) 2.49Kohm,1%,1/2W,AA,TP,2.4x6. 1 S.AR820 2001-001088 R-CARBON(S) 1KOHM,5%,1/2W,AA,TP,2.4X6.4M 1 S.AR821 2004-004089 R-METAL(S) 123Kohm,1%,1/2W,AA,TP,2.5x6.5 1 S.AR823 2003-002020 R-METAL OXIDE(S) 56Kohm,5%,2W,AF,TP,3.9x 1 S.AR826 2001-001131 R-CARBON(S) 33KOHM,5%,1/2W,AA,TP,2.4X6.4 1 S.AR829 2001-001078 R-CARBON(S) 15KOHM,5%,1/2W,AA,TP,2.4X6.4 1 S.AR830 2001-001078 R-CARBON(S) 15KOHM,5%,1/2W,AA,TP,2.4X6.4 1 S.AR831 2001-001078 R-CARBON(S) 15KOHM,5%,1/2W,AA,TP,2.4X6.4 1 S.AR836 2001-001138 R-CARBON(S) 390OHM,5%,1/2W,AA,TP,2.4X6.4 1 S.AR841 2001-000734 R-CARBON 4.7KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR895 2001-001152 R-CARBON(S) 47KOHM,5%,1/2W,AA,TP,2.4X6.4 1 S.AR901 2001-000440 R-CARBON 1OHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR902 2001-000429 R-CARBON 1KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR903 2001-000734 R-CARBON 4.7KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR905 2001-000008 R-CARBON 15KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR906 2001-000281 R-CARBON 100OHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR908 2001-000281 R-CARBON 100OHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR909 2001-000007 R-CARBON 3KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR910 2001-000281 R-CARBON 100OHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR911 2001-000347 R-CARBON 13KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR912 2001-000347 R-CARBON 13KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR913 2001-000429 R-CARBON 1KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR914 2001-000241 R-CARBON 1.5KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR915 2001-000007 R-CARBON 3KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR916 2001-000812 R-CARBON 5.6KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR917 2001-000347 R-CARBON 13KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR920 2001-000281 R-CARBON 100OHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR921 2001-000734 R-CARBON 4.7KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR923 2001-000786 R-CARBON 47KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.A






R924 2001-000591 R-CARBON 3.3KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR925 2001-000440 R-CARBON 1OHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR926 2001-000591 R-CARBON 3.3KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR927 2001-000302 R-CARBON 10OHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR928 2001-000302 R-CARBON 10OHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR929 2001-000008 R-CARBON 15KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR932 2001-000786 R-CARBON 47KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR933 2001-000281 R-CARBON 100OHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR934 2001-000924 R-CARBON 680OHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR935 2001-000281 R-CARBON 100OHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR936 2001-000281 R-CARBON 100OHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR940 2001-000281 R-CARBON 100OHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR941 2001-000281 R-CARBON 100OHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.ARM901 AA32-00015A Module Remocon FRP-3521H31,38KHZ,940MM,M 1 S.ARX801S 2002-001011 R-COMPOSITION 3.3Mohm,5%,1/2W,AA,TP,3.7x 1 S.ARY801S 2002-001012 R-COMPOSITION 8.2Mohm,5%,1/2W,AA,TP,3.7x 1 S.ASF101 2904-000302 FILTER-SAW AV 38.9MHz,SIP5K,ST,15.4dB,B/ 1 S.ASF102 2904-001203 FILTER-SAW AV 38.9MHz,SIP5K,ST,16.9dB,B/ 1 S.ASW801S 3403-001130 SWITCH-PUSH 250VAC,5A,SPST,OFF-ON-OFF,- 1 S.AT0010 AA27-00067A COIL CHOKE -,240uH,YL9N 12x20 C:6.0,0.12 1 S.AT0010 AA27-00286B COIL CHOKE 1mH,10%,0.5ohm,1A,DR1420C:6.0 1 S.AT0066 AA62-30182G HEAT SINK-ES CT-29A20HR,A6063S,T2.0,26.2 1 S.N.AT0066 AA62-30181H HEAT SINK-ES -,AL6063 EXTR.,2,WHT,50MM,- 1 S.N.AT0077 AA41-01231C PCB MAIN CS21Z40,FR-1,1,C,1.6,245*245*1. 1 S.N.AT0085 1201-002118 IC-AUDIO AMP TDA7297SA,ZIP,15P,-,DUAL,32 1 S.AT0087 1203-003954 IC-POSI.FIXED REG. KA78R05CTU,TO-220F,4P 1 S.AT0087 1203-004010 IC-POSI.FIXED REG. KA78R08CTU,TO-220F,4P 1 S.AT0087 1203-001944 IC-POSI.FIXED REG. 78RM33,TO-220,3P,-,PL 1 S.AT0088 1204-002183 IC-VERTICAL PROCESSO LA78045,TO220,7P,15 1 S.AT0098 AA62-00145A HEAT SINK KS9A,A1050,T1.0,23,50,WHITE,PS 1 S.N.AT0105 AA60-30001A WASHER-PLATE M3,ID3.5,15X8.5,T1.0,SBHG 1 S.N.AT0175 AA62-00065A HEAT SINK-PS DP,-,-,-,AA62-00045A,-,-,-, 1 S.N.AT0175 AA62-00057B HEAT SINK-PS CT-29K12P,A1050S,1.0,41,60, 1 S.N.AT0175 BP62-00063A HEAT SINK-PS CHAMP,A1050S,T2.0,42,100,WH 1 S.N.AT0245 AA39-20031D LEAD CONNECTOR-ASSY UL1007#26,9P,500,SMH 1 S.AT0245 0202-001492 SOLDER-WIRE FLUX HSE-02 LFM48 SR-34 S,-, 0.025 S.N.AT0296 AA27-00035B COIL LINEARITY 30uH,DR15x18,11.0mm,19x45 1 S.AT0313 3404-001252 SWITCH-TACT 12VDC,50MA,130GF,7.5X7.1,1 1 S.AT0313 3404-001252 SWITCH-TACT 12VDC,50MA,130GF,7.5X7.1,1 1 S.AT0313 3404-001252 SWITCH-TACT 12VDC,50MA,130GF,7.5X7.1,1 1 S.AT0313 3404-001252 SWITCH-TACT 12VDC,50MA,130GF,7.5X7.1,1 1 S.AT0313 3404-001252 SWITCH-TACT 12VDC,50MA,130GF,7.5X7.1,1 1 S.AT0900 1404-001045 THERMISTOR-NTC 4.7ohm,4.565A,2900K,-,-,- 1 S.AT401 AA26-50001M TRANS-H.DRIVE -,-,-,80mH,-,-,520uH,-,-,- 1 S.AT444 AA26-00259A TRANS FBT FQH21A001,CPTTV,3.33mH,FUR3966 1 S.AT801S AA26-00228D TRANS SWITCHING 42B135-**,CORE,80V~280V, 1 S.AVP801S 1405-000152 VARISTOR 560V,2500A,14x8.5mm,TP 1 S.AVX801S 1405-000187 VARISTOR 615Vdc,1250A,12.5x7mm,TP 1 S.AX201 2801-003316 CRYSTAL-UNIT 24.576MHz,30ppm,28-AAM,20pF 1 S.A

0502-001263 TR-POWER FJAF6810A,NPN,60000MW,TP-3PF(FO 1 S.A

T0610 AA96-04297A ASSY PCB P-SIDE AV 21Z40,AA94-15707A 1 S.N.ACA01 2202-000121 C-CERAMIC,MLC-AXIAL 0.1nF,10%,50V,Y5P,-, 1 S.ACA02 2202-000121 C-CERAMIC,MLC-AXIAL 0.1nF,10%,50V,Y5P,-, 1 S.ACA03 2401-002009 C-AL 100uF,20%,16V,GP,TP,6.3x7,5 1 S.ACA04 2401-002009 C-AL 100uF,20%,16V,GP,TP,6.3x7,5 1 S.AJA330 3722-001061 JACK-PHONE 1P,3.6PI,AG,BLK,N 1 S.AJA333 3722-001164 JACK-PIN 3P,SN,WH:YE:RE,STRAIGHT 1 S.ALA01 2701-000114 INDUCTOR-AXIAL 10UH,10%,2534 1 S.ALA02 2701-000114 INDUCTOR-AXIAL 10UH,10%,2534 1 S.APCB AA41-01178A PCB SUB CS21Z30,FR-1,1,A,1.6,245*245*1.6 1 S.N.ARA01 2001-000028 R-CARBON(S) 100OHM,5%,1/2W,AA,TP,2.4X6.4 1 S.ARA02 2001-000028 R-CARBON(S) 100OHM,5%,1/2W,AA,TP,2.4X6.4 1 S.AT0245 AA39-20068E LEAD CONNECTOR-ASSY ,8P,500,YBNH025-08,6 1 S.AT0245 AA39-20069C LEAD CONNECTOR-ASSY ,5P,400,YBNH025-05,6 1 S.AT0245 0202-001492 SOLDER-WIRE FLUX HSE-02 LFM48 SR-34 S,-, 0.003 S.N.AT0557 AA97-16730A ASSY AUTO-AV SIDE 21Z40,AA97-16384A 1 S.N.A


T0239 AA96-04367A ASSY PCB P-CRT 21,S16D,TH,SHEM 1 S.N.AC504 2301-001259 C-FILM,LEAD-PPF 100nF,5%,400V,TP,19x8x16 1 S.AC505 2202-000825 C-CERAMIC,MLC-AXIAL 680pF,10%,50V,Y5P,TP 1 S.AC506 2401-000430 C-AL 10uF,20%,250V,GP,TP,10x16mm,5m 1 S.AC507 2401-000430 C-AL 10uF,20%,250V,GP,TP,10x16mm,5m 1 S.AC508 2201-000723 C-CERAMIC,DISC 4.7NF,20%,3KV,Y5U,TP,16X5 1 S.AC509 2201-000723 C-CERAMIC,DISC 4.7NF,20%,3KV,Y5U,TP,16X5 1 S.ACN330 3711-002648 HEADER-BOARD TO CABLE BOX,9P,1R,2.5mm,ST 1 S.AD501 0402-000006 DIODE-RECTIFIER 1N4007GP,1KV,1A,DO-41,TP 1 S.AD502 0402-000006 DIODE-RECTIFIER 1N4007GP,1KV,1A,DO-41,TP 1 S.AD503 0402-000006 DIODE-RECTIFIER 1N4007GP,1KV,1A,DO-41,TP 1 S.AD504 0402-000006 DIODE-RECTIFIER 1N4007GP,1KV,1A,DO-41,TP 1 S.ADZ501 0403-000720 DIODE-ZENER MTZJ9.1B,8.57-9.01V,500mW,DO 1 S.ADZ502 0403-000720 DIODE-ZENER MTZJ9.1B,8.57-9.01V,500mW,DO 1 S.ADZ503 0403-000720 DIODE-ZENER MTZJ9.1B,8.57-9.01V,500mW,DO 1 S.AF101 2901-000299 FILTER-EMI ON BOARD -,6A,UL/CSA,-,9x7.5, 1 S.AGT502 BH71-40300A PIN-HINGE BRASS,D2.36!,HEAT/SINK,SN 1 S.N.AGT503 BH71-40300A PIN-HINGE BRASS,D2.36!,HEAT/SINK,SN 1 S.N.AGT504 BH71-40300A PIN-HINGE BRASS,D2.36!,HEAT/SINK,SN 1 S.N.AIC501 AA96-04300A ASSY H/S AA96-50311P 1 S.N.AL505 2701-000114 INDUCTOR-AXIAL 10UH,10%,2534 1 S.ALX085 AA27-90001B COIL-SPARK,GAP S-23,1.5KV,-,-,-,-,-,-,-, 1 S.ALX085 AA27-90001B COIL-SPARK,GAP S-23,1.5KV,-,-,-,-,-,-,-, 1 S.AM0081 6003-000115 SCREW-TAPTITE BH,+,B,M3,L6,ZPC(BLK),SWRC 1 S.APCB AA41-01177B PCB CRT CS21Z30,FR-1,1,A,1.6,245*245*1.6 1 S.N.AR501 2001-000281 R-CARBON 100OHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR501H 2002-001017 R-COMPOSITION 1Kohm,10%,1/2W,AA,TP,3.7x9 1 S.AR502 2001-000241 R-CARBON 1.5KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR502H 2002-001017 R-COMPOSITION 1Kohm,10%,1/2W,AA,TP,3.7x9 1 S.AR503 2001-000241 R-CARBON 1.5KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR504 2001-000281 R-CARBON 100OHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR505 2001-000281 R-CARBON 100OHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR506 2001-000241 R-CARBON 1.5KOHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AR511 2002-001017 R-COMPOSITION 1Kohm,10%,1/2W,AA,TP,3.7x9 1 S.AR514 2001-001062 R-CARBON(S) 10MOHM,5%,1/2W,AA,TP,2.4X6.4 1 S.AR516 2008-001049 R-FUSIBLE(S) 3.9ohm,5%,2W,AF,TP,3.9x10mm 1 S.AR551 2001-000281 R-CARBON 100OHM,5%,1/8W,AA,TP,1.8X3.2MM 1 S.AT0074 1201-002244 IC-VIDEO AMP TDA6108AJF,DBS9MPF,9P,21.8x 1 S.AT0100 AA97-16812A ASSY AUTO-CRT 21,S16D,TH,SHEM 1 S.N.AT0175 AA62-30175D HEAT SINK-PS -,SECC,T1.0,-,33X15X30 FT-2 1 S.N.AT0245 0202-001492 SOLDER-WIRE FLUX HSE-02 LFM48 SR-34 S,-, 0.003 S.N.AT0310 4715-001036 SURGE ABSORBER 500V,20%,-,-,TP 1 S.AT0310 4715-001036 SURGE ABSORBER 500V,20%,-,-,TP 1 S.AV999S 3704-001197 SOCKET-CRT 8P+SEN,29PI,22.5PI,NI+SN,- 1 S.A

ASSY CPTT0521 AA91-09968A ASSY CPT CW21Z403NCXXEC,21,A51ELW032X00 1 S.N.AT0063 AA03-00475A CRT COLOR A51ELW032X007,380,1.0,12.6,1.3 1 S.AT0089 AA27-00362A COIL DEGAUSSING YE-050926,CPPTV,4.41mh,5 1 S.AT0527 AA61-01373B HOLDER-D COIL NYLON,WHT,SEH 4 S.N.AT0603 AA96-03893A ASSY TBC WIRE P Vixlim,21,PAL,NTSC,2P 1 S.N.A

ASSY BOXM0003 AA92-11571N ASSY BOX CW21Z403NCXXEC 1 S.N.AT0130 AA69-03386G BOX-00,SET 21Z40(OVERSEA),DY-04,AB,YEL,A 1 S.N.A

ASSY P/MATERIALM0113 AA92-11572A ASSY P/MATERIAL 21Z40 1 S.N.AT0214 AA60-40006A PIN-STAPLE AUTO,33X17.8X2.4,H18,33X17.8X 12 S.N.A






T0107 HA83-00058A LP-RESIN-EPS ,CHEIL SF-301V,WHT 0.001 S.N.AT0524 6902-000006 BAG PE HDPE/NITRON/HDPE,T0.02/T0.5/T0.2, 1 S.N.A

ASSY ACCESSORYM0045 AA92-11573L ASSY ACCESSORY CW21Z403NCXXEC,S16D,TOMOR 1 S.N.AT0091 HA83-00047A LP-TAPEACETATE T0.1MM,W20MM,L200MM 0.065 S.N.AT0074 AA59-00399A REMOCON tomorrow,TM85,S3C1860XP0-SKT1,36 1 S.A

ASSY LABELM0019 AA92-11919A ASSY LABEL CW21Z423NCXXEC,S16D,TOMORROW 1 S.N.A

ASSY COVER REARM0002 AA90-05530E ASSY COVER REAR CW21Z403NCXXEC 1 S.N.AM0006 AA63-01384A COVER-REAR 21Z40(SEH),HIPS,FV2,BK500 1 S.AT0098 AA81-00096A RESIN-A VL-1823,G5433,A 0.1 S.N.AT0069 AA60-00091J SPACER-FELT -,FELT,330X10,-,-,BLK,T0.5,- 2 S.N.AT0069 AA60-00091R SPACER-FELT ,FELT,250X10,,,BLK,T0.5,, 1 S.N.AT0578 AA64-03660X INLAY AV 21Z30,PS,SHEET,T0.3,BLACK,S16C, 1 S.N.AT0522 AA65-30008A CLAMPER CORE-CORD -,PE,HB,-,BLK,- 1 S.N.AT0066 AA64-00894S INLAY-BACK S16A,(GREEN-II),PS,T0.3,SHEET 1 S.N.A

ASSY COVER FRONTM0001 AA90-05749A ASSY COVER FRONT CW21Z413NCXXEC,S16D,SEH 1 S.N.AT0081 6002-000515 SCREW-TAPPING RH,+,2,M4,L15,ZPC(WHT),SWR 5 S.AT0081 6002-000515 SCREW-TAPPING RH,+,2,M4,L15,ZPC(WHT),SWR 1 S.AM0081 6003-001268 SCREW-TAPTITE TH,+,B,M4,L12,ZPC(YEL),SWR 1 S.N.AT0238 AA60-10050V BOLT-HEX -,SWRCH18A,M6,L30,HH,+,WC,-,Z 4 S.N.AT0003 AA96-04106J ASSY COVER P-FRONT 21Z41,HIPS,HB,BKN1576 1 S.AM0081 6003-001019 SCREW-TAPTITE RH,+,-,B,M4,L12,ZPC(BLK),S 1 S.AM0081 6003-001019 SCREW-TAPTITE RH,+,-,B,M4,L12,ZPC(BLK),S 1 S.AM0081 6003-001024 SCREW-TAPTITE RWH,+,B,M4,L12,ZPC(YEL),SW 4 S.AT0069 AA60-00091R SPACER-FELT ,FELT,250X10,,,BLK,T0.5,, 1 S.N.AT0156 AA61-00721D HOLDER-RAIL HIPS,V0,NON-DECA,GRAY 1 S.N.ACIS7 AA61-60003J SPRING ETC-CS -,SUS304,-,-,OD6,N7,OD6,-, 1 S.N.AM0112 AA63-01381C COVER-FRONT 21Z41,HIPS,T3.0,HB,GR503,BKN 1 S.N.AT0022 AA64-04327B KNOB CONTROL 29Z40,ABS,-,-,-,HB,GR503,BK 1 S.N.AT0023 AA64-04334B KNOB POWER 21Z41,ABS,GR515,BKN1576,SEH 1 S.N.AT0238 AA64-04340A WINDOW REMOCON-LED Z40(SEH,TSE),PC,CLEAR 1 S.N.AT0084 HA83-00010A LP-RESIN ,OROGLAS,VM-100 ZHN 2 0.001 S.N.AT0057 AA64-70123A BADGE-BRAND NEW,AL,L50,FLAT,SILVER,SAMSU 1 S.N.AT0527 AA65-00011C CLAMPER CORE-WIRE ALL MODEL,NYLON 66,V2, 1 S.N.AT0527 AA65-30105A CLAMPER CORE-WIRE ALL MODEL,NYLON 66,V2, 1 S.N.AT0175 AA96-03164A ASSY SPEAKER P 8ohm,6*13cm,Z31,10W,SPK+W 1 S.A

ASSY FIXINGT0892 AA91-09881F ASSY FIXING CS21Z40ZQCXBWT,S16D,TOMORROW 1 S.N.AT0121 3301-001201 CORE-FERRITE AE,21x11x32mm,1500,280G 1 S.AT0245 AA39-20010D LEAD CONNECTOR-ASSY ,1P,400,YFH800-01,S, 2 S.AT0527 AA65-30018A CLAMPER CORE-WIRE DONG-A,NYLON-66,-,-,-, 2 S.N.AT0527 AA65-30110A CLAMPER CORE-WIRE ALL MODEL,NYLON 66,V2, 1 S.N.AT0066 AA96-01126B ASSY POWER CORD DP,AA39-10001G,CP2,H/C40 1 S.AT0268 AA39-10001G CBF-POWER CORD -,KKP-419C,KLCE-2F,2.286m 1 S.AT0010 AA61-20284A HOLDER P-CORD,PP,-,-,-,BLK,VO,KE-002 1 S.N.A


MEMO


4. Exploded View & Part List

Exploded View & Part List


T0066

M0014

T0610

T0057

T0023

CIS7

T0156

T0022 T0238

T0175

T0239T0063

M0006

M0112

T0003

T0074

You can search for the updated part code through ITSELF web site.URL:http://itself.sec.samsung.co.kr

4-1 CW21Z413NCXXEC

Loc.No. Code No. Description Specification Q'ty SA/SNA RemarkCIS7 AA61-60003J SPRING ETC-CS -,SUS304,-,-,OD6,N7,OD6,-, 1 S.N.A

M0006 AA63-01384A COVER-REAR 21Z40(SEH),HIPS,FV2,BK500 1 S.AM0014 AA94-15923A ASSY PCB MAIN CW21Z403NCXXEC,S16D,TH,ELD 1 S.AM0112 AA63-01381C COVER-FRONT 21Z41,HIPS,T3.0,HB,GR503,BKN 1 S.N.AT0003 AA96-04106J ASSY COVER P-FRONT 21Z41,HIPS,HB,BKN1576 1 S.AT0022 AA64-04327B KNOB CONTROL 29Z40,ABS,-,-,-,HB,GR503,BK 1 S.N.AT0023 AA64-04334B KNOB POWER 21Z41,ABS,GR515,BKN1576,SEH 1 S.N.AT0057 AA64-70123A BADGE-BRAND NEW,AL,L50,FLAT,SILVER,SAMSU 1 S.N.AT0063 AA03-00475A CRT COLOR A51ELW032X007,380,1.0,12.6,1.3 1 S.AT0066 AA96-01126B ASSY POWER CORD DP,AA39-10001G,CP2,H/C40 1 S.AT0074 AA59-00399A REMOCON tomorrow,TM85,S3C1860XP0-SKT1,36 1 S.AT0156 AA61-00721D HOLDER-RAIL HIPS,V0,NON-DECA,GRAY 1 S.N.AT0175 AA96-03164A ASSY SPEAKER P 8ohm,6*13cm,Z31,10W,SPK+W 1 S.AT0238 AA64-04340A WINDOW REMOCON-LED Z40(SEH,TSE),PC,CLEAR 1 S.N.AT0239 AA96-04367A ASSY PCB P-CRT 21",S16D,TH,SHEM 1 S.N.AT0610 AA96-04297A ASSY PCB P-SIDE AV 21Z40,AA94-15707A 1 S.N.A

Samsung s16d Tomorrow Chassis Cw21z413ncxxec

Documents

Transcript of Samsung s16d Tomorrow Chassis Cw21z413ncxxec