Samsung DLP TV HL Series Manual

Owner’s InstructionsHL-S4265WHL-S5065WHL-S5665WHL-S6165WHL-S6765WHL-S5055W

Register your product at www.samsung.com/global/register

This device is a Class B digital apparatus.

BP68-00586F-00Eng(cover) 3/30/06 7:08 PM Page 3

English - 2

A Guide to Digital TV• What is Digital Television?

Digital television (DTV) is a new way of transmitting high quality video and audio to your TV set.Using DTV, broadcasters can transmit high definition TV (HDTV) images, Dolby digital surroundaudio, and new services such as multicasting (transmitting more than one program on the same TV channel) and datacasting. Several of these services can be combined into a single digital broadcast.

Digital Television Services• Digital Picture Quality

DTV programs are transmitted in two different formats. The first is Standard Definition Television(SDTV) and the second is High Definition Television (HDTV).

• SDTV program formats include 480-line interlaced (480i) and 480-line progressive (480p) video.480i programs are essentially a digital version of our current analog TV programs, while the 480pformat offers improved image detail over 480i. Some 480p programs are broadcast in widescreenand are comparable to progressive-scan DVD movies in image quality.

• HDTV program formats include 1080-line interlaced (1080i) and 720-line progressive (720p). Both HDTV formats are always broadcast in widescreen, and offer much higher picture quality thanSDTV.

• Dolby Surround SoundWith DTV, you can listen to a variety of Dolby digital audio formats from Dolby Surround 2.0 toDolby Digital 5.1 surround, using your home audio system. Many HDTV programs are now broadcast with DD 5.1 soundtracks.

U.S.A Only

Other countries

The product unit accompanying this user manual is licensed under certain intellectual property rights of certain thirdparties. In particular, this product is licensed under the following US patents:5,991,715, 5,740,317, 4,972,484, 5,214,678, 5,323,396, 5,539,829, 5,606,618, 5,530,655, 5,777,992,6,289,308, 5,610,985, 5,481,643, 5,544,247, 5,960,037, 6,023,490, 5,878,080, and under US PublishedPatent Application No. 2001-44713-A1.

This license is limited to private non-commercial use by end-user consumers for licensed contents. No rights are granted for commercial use. The license does not cover any product unit other than this product unit and the licensedoes not extend to any unlicensed product unit or process conforming to ISO/IEC 11172-3 or ISO/IEC 13818-3 usedor sold in combination with this product unit. The license only covers the use of this product unit to encode and/ordecode audio files conforming to the ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this licensefor product features or functions that do not conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.

The product unit accompanying this user manual is licensed under certain intellectual property rights of certainthird parties. This license is limited to private non-commercial use by end-user consumers for licensed contents. No rights are granted for commercial use. The license does not cover any product unit other than this product unitand the license does not extend to any unlicensed product unit or process conforming to ISO/IEC 11172-3 orISO/IEC 13818-3 used or sold in combination with this product unit. The license only covers the use of this product unit to encode and/or decode audio files conforming to the ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product features or functions that do not conform to the ISO/IEC11172-3 or ISO/IEC 13818-3.

BP68-00586F-00Eng(002~015) 3/30/06 7:10 PM

English - 3

Q&A

1. Is the antenna I use for existing TV reception good enough for DTV?Over-the-air (OTA) digital TV broadcasting uses the same channels as analog TV and works wellwith many existing TV antennas. However, DTV broadcast channel assignments are different thananalog channels. You should find out whether your local DTV broadcasts are on VHF (channels 2-13) or UHF (channels 14-69) to see if you need a different antenna.

If your DTV channels are on UHF and you already get good UHF reception, your present antennamay work fine. The same holds true for VHF DTV reception. Note that in some markets, both VHFand UHF channels are used for DTV broadcasts.

You can find out the latest DTV channel assignments for your area by browsing selected Internetweb sites such as www.titantv.com, www.10000watts.com, and www.fcc.gov.

2. How difficult is it to receive DTV signals indoors?This depends on whether your local DTV stations are running full power or not and how close yourlocation is to the transmission tower. DTV receivers do not require as much signal as analog TVreceivers to produce high-quality images and sound.

Once the DTV signal level exceeds a certain threshold at the receiver, the digital video and audiodata is decoded at the same quality it was originally encoded for broadcast.This is a big advantage for DTV over analog TV - there is no noise, ghosting, static, or scratchyaudio.

3. How can I connect an antenna in my townhouse, co-operative apartment, condominium, or apartment?The Federal Communications Commission’s OTARD Rule (part of the Telecommunications Act of1996) allows residents of condominiums, townhouse, or members of neighborhood associations toput up outside antennas for reception of broadcast TV signals as long as those antennas are notlocated in common areas and are no more than 12’ in height.

Residents of rental units (apartments, etc.) are not covered by the OTARD rules and will have to useindoor antennas to receive DTV broadcasts. It is possible that the landlord of an apartment complexcan provide broadcast DTV signals via a master TV antenna system to each apartment.

4. Can I connect my DTV set-top receiver to my cable TV service?Cable TV systems use a different method for transmitting digital TV programs that is currently incompatible with broadcast DTV set-top receivers. So you will still need to use an outdoor or indoor antenna to receive OTA broadcast DTV programs.

The good news is that you won’t have to pay a monthly or per-program charge to watch OTA DTVand HDTV programs. They’re free, unlike subscription satellite TV or premium cable TV. All youneed is an antenna and a DTV set-top receiver to enjoy clear, sharp widescreen images and high-quality audio.

BP68-00586F-00Eng(002~015) 3/30/06 7:10 PM

Table of Contents

English - 4

Your New Wide TV...................................................................................8Viewing Position ......................................................................................................8List of Features.........................................................................................................9Checking Accessories...............................................................................................9Right side buttons...................................................................................................10Side Panel Jacks ................................................................................................... 10Front Panel LED Indicators.......................................................................................11 Rear Panel Jacks ....................................................................................................12Remote Control......................................................................................................13

Connections ...........................................................................................16Connecting VHF and UHF Antennas ........................................................................16

Antennas with 75-ohm Round Leads ..............................................................16Connecting Cable TV .............................................................................................17

Cable without a Cable Box...........................................................................17Cable with a Cable Box that Descrambles All Channels...................................17Cable with a Cable Box that Descrambles Some (But Not All) Channels ............18

Connecting a VCR .................................................................................................19Connecting a VCR to the Video or S-Video/Audio jack....................................19Connecting a Second VCR to Record from the TV ...........................................19

Connecting a Camcorder .......................................................................................20Connecting a DVD Player .......................................................................................21

Connecting to Y, PB, PR.................................................................................21Connecting to Audio and Video Jacks............................................................21

Connecting a DTV Set-Top Box ................................................................................22Connecting to Y, PB, PR.................................................................................22Connecting to HDMI (High Definition Multimedia Interface) ..............................22Connecting to DVI (Digital Visual Interface) ....................................................23

Connecting a Digital Audio System..........................................................................23Connecting to an Analog Amplifier..........................................................................24

Operation ..............................................................................................26Turning the TV On and Off .....................................................................................26Plug & Play Feature................................................................................................26Viewing the Menus and On-Screen Displays .............................................................29Selecting a Menu Language....................................................................................30Memorizing the Channels .......................................................................................31Changing Channels ...............................................................................................33Customizing Your Remote Control ............................................................................34Remote Control Codes............................................................................................38Setting the Clock....................................................................................................41Setting the On/Off Timer ........................................................................................43Setting the Sleep Timer ...........................................................................................44Viewing an External Signal Source ..........................................................................45Assigning Names to External Input Mode .................................................................46

Channel Control .....................................................................................48Selecting Your Favorite Channels .............................................................................48Viewing the Channel Lists .......................................................................................50Editing the Channel Lists .........................................................................................51Default List mode ...................................................................................................53Labeling the Channels ............................................................................................54Fine Tuning Analog Channels .......................................................................55Checking the Digital-Signal Strength ..............................................................56LNA (Low Noise Amplifier) .....................................................................................57

Digital

Analog

BP68-00586F-00Eng(002~015) 3/30/06 7:10 PM

English - 5

Picture Control ........................................................................................60Picture Control.......................................................................................................60Changing the Picture Size.......................................................................................63Digital Noise Reduction ..........................................................................................64Viewing the DNIe Demonstration .............................................................................65Setting the My Color Control Mode .........................................................................66Using the Color Weakness Enhancement Feature.......................................................68Setting the Film Mode ............................................................................................69Freezing the Picture................................................................................................70Setting the Blue Screen Mode..................................................................................71

Sound Control ........................................................................................74Sound Control .......................................................................................................74Auto Volume..........................................................................................................76Choosing a Multi-Channel Sound (MTS) track .................................................77Choosing a Multi-Channel Sound (MTS) track .................................................78Selecting the Internal Mute......................................................................................79Setting the On/Off Melody.....................................................................................80Setting up DNSe (Digital Natural Sound engine) .......................................................81Sound Reset ..........................................................................................................82

Special Features .....................................................................................84Setting the Function Help ........................................................................................84Menu Transparency Level........................................................................................85Using Game Mode ................................................................................................86Using the V-Chip....................................................................................................87Using the V-Chip for Digital channels .......................................................................97Viewing Closed Captions (On-Screen Text Messages) ......................................99Viewing Closed Captions (On-Screen Text Messages) ....................................101

PC Display ...........................................................................................104Using Your TV as a Computer (PC) Display .............................................................104Adjusting the Picture Quality .................................................................................107Changing the Picture Position ................................................................................108Adjusting the Picture Quality and Position Automatically...........................................109Changing the Picture Size (PC Mode) ....................................................................110Viewing the Current Resolution ..............................................................................111Initializing the Picture Settings ...............................................................................112

Appendix.............................................................................................114Replacing the Lamp..............................................................................................114Troubleshooting ...................................................................................................116Cleaning and Maintaining Your TV ........................................................................117Using Your TV in Another Country .........................................................................117Specifications ......................................................................................................117

Analog

Analog

Digital

Digital

BP68-00586F-00Eng(002~015) 3/30/06 7:10 PM

SAMSUNG

BP68-00586F-00Eng(002~015) 3/30/06 7:10 PM

Your New Wide TV

BP68-00586F-00Eng(002~015) 3/30/06 7:10 PM

Viewing PositionTo optimize your viewing comfort, please follow the guidelines below for viewing distance. If viewing for an extended period of time, sit as far back from the screen as possible.

Your New Wide TV

English - 8

When installing the product, make sure to keepit away from the wall (more than 10 cm/4 inches)for ventilation purposes.• Poor ventilation may cause an increase in the

internal temperature of the product, resulting in a shortened component life and degraded performance.

BP68-00586F-00Eng(002~015) 3/30/06 7:10 PM

English - 9

List of FeaturesYour TV was designed and engineered using the latest technology. It is a full-featured, high-performanceunit that exceeds industry standards. In addition, it has these special features:

• Easy-to-operate remote control• Easy-to-use on-screen menu system you can access from right side buttons or remote control• Automatic timer to turn the TV on and off at any time you choose• Adjustable picture and sound settings and the ability to memorize your favorite settings• Automatic channel tuning for up to 181 channels• A special filter to reduce or eliminate reception problems• Fine tuning control for the sharpest picture possible• A built-in multi-channel sound decoder for stereo and bilingual listening• Built-in, dual channel speakers• A special sleep timer• Widescreen TV with adjustable image size• Life-like clear images provided by DNle technology• My Color Control Mode for corresponding with your color style• Color weakness Mode• Digital Input jack• Digital Audio Output (OPTICAL) jack• Game Mode

Checking Accessories

Antenna Cable

Power Cord 3903-000144

Component Cables (RCA)HDMI/DVI cable

Owner’s Instructions Remote Control (BP59-00116A)/AAA Batteries

S-VIDEO Cable HDMI Cable

The following parts are sold separately and are available at most electronics stores.

Once you have unpacked your TV, check to make sure that you have all the parts shown here.If any piece is missing or broken, call your dealer.

Optical Cable

Warranty Card/Registration Card/

Safety Guide Manual/Quick Guide Manual/

BP68-00586F-00Eng(002~015) 4/7/06 10:10 AM

Your New Wide TV

English - 10

Right side buttons

The buttons on the right side panel control your TV’s basic features, including the on-screen menu system.To use the more advanced features, you must use the remote control.The product color and shape may vary depending on the model.

Press to switch between viewing TV programs and signals from connected components.Press to see the on-screen menu.

Press to raise or lower the volume and to select items when using the on-screen menu.

Press to change channels and move between items on the on-screen menu.

Press to activate (or change) a particular item.

Side Panel Jacks

Use the right side panel jacks to connect a component that is used only occasionally (a camcorder orvideo game, for example).The product color and shape may vary depending on the model.

Connect the video signal from a camcorder or video game.

Connect the audio signal from a camcorder or video game.

Connect an S-Video signal from a camcorder or video game.(S-Video 3 jack and Audio L/R input 3 are used in conjunction.)

BP68-00586F-00Eng(002~015) 3/30/06 7:10 PM

English - 11

Front Panel LED Indicators The three lights on the front panel indicate the status of your TV. The product color and shape may vary depending on the model.

Indicator Light Key

TIMER

Standby state.

The picture will automatically appear in about 15 seconds.

Auto Timer ON/OFF has been set and the set will automatically beturned on in about 25 seconds.

A cooling fan inside the set is not operating normally.

Lamp cover on the rear of the set is not properly shut.

Check if the ventilation hole on the rear of the set is blocked, becauseif the inner temperature is too high, the power will shut off.

Lamp may be defective. Please contact a certified technician.

LAMP STAND BY/TEMP Indication

: Light is On: Light is Blinking: Light is Off

Remote Control Sensor Aim the remote control towards this spot on the TV.

POWERPress to turn the TV on and off.

HL-S4265W/HL-S5065W/HL-S5665W/HL-S6165W/HL-S6765W

HL-S5055W

• It takes about 30 seconds for the TV to warm up, so normal brightness may not appear immediately.• The TV has a fan to keep the inside lamp from overheating. You’ll occasionally hear it working.

Remote Control Sensor Aim the remote control towards thisspot on the TV.

POWERPress to turn the TV on and off.

BP68-00586F-00Eng(002~015) 4/3/06 3:16 PM

Rear Panel JacksUse the rear panel jacks to connect components such as a VCR. You can connect different componentssuch as VCRs, Set-Top Box and a DVD player etc., because there are two sets of video input jacks andtwo sets of component video input jacks on the rear panel of your TV. For more information, see“Connections”.

Your New Wide TV

English - 12

Œ ANTENNA terminalsTwo independent cables or antennas can be connected to these terminals. Use “ANT 1 IN (CABLE)” and “ANT 2 IN (AIR)”terminals to receive a signal from VHF/UHF antennas or yourcable system. (Refer to pages 16~18)

´ SERVICEThis jack is for service only.

ˇ DIGITAL AUDIO OUT (OPTICAL) jackConnect to a Digital Audio Component. (Refer to page 23)

¨ DVI (Digital Video Interface) AUDIO input jacksConnect to the digital audio output jacks of a device with DVI output. (Refer to page 23)

ˆ S-VIDEO input jacksConnects an S-Video signal from an S-VHS VCR or DVD player. (Refer to page 20)

Ø VIDEO/AUDIO input jacks Connect video/audio signals from external sources, such as VCRor DVD players. (Refer to pages 19 and 21)

∏ VIDEO/AUDIO output jacks Sends video/audio signals from the TV to an external source,such as a VCR. These jacks are available only in TV, Video and S-Video modes. (Refer to pages 19 and 24)

” COMPONENT IN 1, 2 jacks (Y, PB, PR, AUDIO L/R) Use these jacks to connect the component video/audio signalsfrom a DVD player or a Set-Top Box. (Refer to pages 21~22)

’ PC VIDEO Input jackConnect these to the video output jack on your PC.

˝ PC AUDIO Input jackConnect these to the audio output jack on your PC.(Refer to page 104)

Ô SERVICE 2This jack is for service only.

HDMI (High Definition Multimedia Interface)/ DVI Input jack (HDMI 2/DVI IN)Connect to the HDMI jack of a device with HDMI output. This input can also be used as a DVI connection with separateanalog audio inputs. An optional HDMI/DVI cable will be necessary to make this connection. When using the optionalHDMI/DVI adapter, the DVI analog audio inputs on your TV allowyou to receive left and right audio from your DVI device. (Notcompatible with PC) (Refer to pages 22~23)

Ò HDMI (High Definition Multimedia Interface)Input jack (HDMI IN 1)Connect to the HDMI jack of a device with HDMI output.

Ú POWER INConnect the supplied power cord.

BP68-00586F-00Eng(002~015) 4/21/06 4:41 PM

English - 13

Remote ControlYou can use your remote control within a distance of 23 feet and an angle of 30 degrees from the leftand right sides of the TV’s remote control receiver. You can also use your remote control to operate yourVCR, Cable box, DVD player and Set-top box. See pages 38~40 for details.

1. POWERTurns the TV on and off.

2. Channel Number Press to directly tune to a particular channel.

3. -Press to select additional channels (digitaland analog) being broadcast by the samestation. For example, to select channel “54-3”, press “54”, then press “-” and “3”.

4. ANTENNAPress to select “AIR” or “CABLE”.

5. CH MGRUsed to displays Channel Lists on the screen.

6. VCR/DVD ControlsControls VCR or DVD functions: Rewind, Stop,Play/Pause, Fast Forward.

7. VOL +, VOL -Press to increase or decrease the volume.

8. MUTEPress to mute the TV sound.

9. MENUDisplays the main on-screen menu.

10. ▲, ▼, œ, √, ENTERPress to select highlight up, down, left, orright. While using the on-screen menus,press ENTER to activate (or change) a particular item.

11. INFOPress to display information on the TVscreen.

12. CAPTIONControls the caption decoder.

13. P.MODEAdjust the TV picture by selecting one of the preset factory settings (or select yourpersonal, customized picture settings.)(Refer to page 60)

14. S.MODESelect Sound effect. (Refer to page 75)

15. MTS (Multichannel TelevisionStereo)Press to choose Stereo, Mono or SAP(Secondary Audio Program).

16. Mode(TV/DVD/STB/CABLE/VCR)Selects a target device to be controlled bythe Samsung remote control (i.e., TV, DVD,STB, CABLE, or VCR).

17. SOURCEPress to display all of the available videosources (TV, AV1, AV2, AV3, S-Video1,S-Video2, S-Video3, Component1,Component2, PC, HDMI1, and HDMI2).

18. PRE-CHTunes to the previous channel.

19. DNSeDNSe enhances the sound quality,automatically controls output,and prevents sound distortion.Press this button to set it On or Off. (Refer to page 81)

20. FAV.CH (Favorite Channel)Press to switch between your favorite channels.

21. CH /Press to change channels.

22. EXITPress to exit the menu.

23. SLEEPPress to select a preset time interval forautomatic shut off. (Refer to page 44)

24. P.SIZEPress to change the screen size. (Refer to page 63)

25. STILLPress to pause the current screen. (Refer to page 70)

26. RESETIf your remote control is not functioningproperly, take out the batteries and pressthe reset button for about 2~3 seconds. Re-insert the batteries and try using theremote control again.

27. SETUsed during set up of this remote control, so that it will work compatibly with otherdevices (Set-top box, VCR, Cable box,DVD, etc.)

NOTES• The Color buttons are used

during the channel listfunction. (Refer to pages48~53)

• This is a special remotecontrol for the visuallyimpaired, and has Braillepoints on the POWER, VOL+, VOL -, CH / , STOP,and PLAY/PAUSE buttons.

BP68-00586F-00Eng(002~015) 3/30/06 7:10 PM

Installing Batteries in the Remote Control

With normal use, the batteries in the remote control should last about a year. If you notice a performancedegradation while using the remote, the batteries may need to be replaced. Make sure you replace bothbatteries and do not mix old and new batteries in the remote control. If you won’t be using the remotecontrol for a long time, remove the batteries and store them in a cool, dry place.

1 Lift the cover at the back of the remote controlupward as shown in the figure.

2 Install two AAA size batteries. Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment.

3 Close the cover as shown in the figure.

NOTE• Do not mix battery types, i.e, alkaline and manganese.

Your New Wide TV

English - 14

BP68-00586F-00Eng(002~015) 3/30/06 7:10 PM

Connections

BP68-00586F-00Eng(002~015) 3/30/06 7:10 PM

Connections

English - 16

Connecting VHF and UHF AntennasIf you do not have a cable system, you will need to connect an antenna to your TV.

Antennas with 75-ohm Round LeadsIf your antenna looks like this: it has 75-ohm round leads.

1 Plug the antenna lead intothe ANT 2 IN (AIR) on the rear panel of your TV.

BP68-00586F-00Eng(016~025) 3/30/06 7:11 PM

English - 17

Connecting Cable TVYou can connect different cable systems to your TV, including cable without a Cable box, and cable with a Cable box that descrambles some or all channels.

Cable without a Cable Box

1 Plug the incoming cable intothe ANT 1 IN (CABLE) on therear panel of your TV.

Cable with a Cable Box that Descrambles All Channels

1 Find the cable connected tothe ANTENNA OUT terminal on your Cable box. This terminal might be labeled “ANT OUT”, “VHF OUT” or simply “OUT”.

2 Connect the other end of the cable to the “ANT 1 IN(CABLE)” terminal on the rear panel of your TV.

BP68-00586F-00Eng(016~025) 3/30/06 7:11 PM

Connections

English - 18

Cable with a Cable Box that Descrambles Some (But Not All) ChannelsTo complete this connection you will need a two-way splitter, an RF (A/B) switch, and four coaxialcables (which you can buy from your Samsung dealer or any electronics store).

1 Find and disconnect thecable that is connected to the ANTENNA IN terminal of your Splitter. This terminal might be labeled “ANT IN”, “VHF IN”or simply, “IN”. Connect this cable to a two-way splitter.

2 Connect a coaxial cablebetween an OUT terminal of the splitter and the IN terminal of the Cable box.

3 Connect a coaxial cablebetween the ANTENNA OUTterminal of the Cable boxand the B-IN terminal of theRF (A/B) switch.

4 Connect another cablebetween the other OUT terminal on the splitter and the A–IN terminal on the RF (A/B) switch.

5 Connect the last coaxialcable between the OUT terminal of the RF (A/B) switch and the ANT 1 IN(CABLE) on the TV.

After you’ve made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B” position to view scrambled channels. (When you set the A/B switch to “B”, you will need to tune your Set-Top Box to the Cable box's output channel, which is usuallychannel 3 or 4.)

BP68-00586F-00Eng(016~025) 4/7/06 10:11 AM

Connecting a VCR

Connecting a VCR to the Video or S-Video/Audio jack

1 Connect a video cablebetween the VIDEO IN (1 or 2) (or S-VIDEO IN) jackon the TV and the VIDEO (orS-VIDEO) output jack on theVCR.

2 Connect a set of audiocables between the AUDIOIN (1 or 2) jacks on the TVand the AUDIO output jackson the VCR.

NOTES• For better video, use an

S-Video cable.• Please be sure to match the

color coded input terminalsand cable jacks.

TV Rear Panel

IncomingCable or Antenna

Stereo VCR

or2

1

Connecting a Second VCR to Record from the TV

1 Connect a video cablebetween the VIDEO OUTjack on the TV and theVIDEO input jack on theVCR.

2 Connect a set of audiocables between the AUDIO OUT jacks on the TV and the AUDIO input jacks on the VCR.

NOTES• Refer to your VCR’s instructions

for more information about how to record using this kind of connection.

• Please be sure to match thecolor coded input terminalsand cable jacks.

TV Rear Panel


Stereo VCR

21

English - 19

BP68-00586F-00Eng(016~025) 3/30/06 7:11 PM

Connecting a CamcorderThe side panel jacks on your TV make it easy to connect a Camcorder to your TV.You can use your camcorder to view tapes without using a VCR.

1 Locate the A/V output jackson the camcorder. They areusually found on the side orback of the camcorder.

2 Connect a set of audiocables between the AUDIOIN jacks on the TV and theAUDIO output jacks on thecamcorder. If you have amono Camcorder, connectL(mono) to the Camcorderaudio out using only oneaudio cable.

3 Connect a video cablebetween the VIDEO IN (or S-VIDEO IN) jack on the TVand the VIDEO (or S-VIDEO)output jack on the Camcorder.The audio-video cables shownhere are usually included witha Camcorder. (If not, checkyour local electronics store.) If your Camcorder is stereo,you need to connect a set oftwo cables.

NOTE• Please be sure to match the


Connections

English - 20

Camcorder Output Jacks

1

TV Rear and right side Camcorder

or

2

3

BP68-00586F-00Eng(016~025) 3/30/06 7:11 PM

Connecting a DVD PlayerThe rear panel jacks on your TV make it easy to connect a DVD player to your TV.

Connecting to Y, PB, PR

1 Connect a set of audiocables between the COMPONENT (1 or 2)AUDIO (L, R) IN jacks on the TV and the AUDIO OUTjacks on the DVD player.

2 To enable Component videoviewing, connect a set of video cables between the COMPONENT (1 or 2) VIDEO (Y, PB, PR) IN jacks on the TV and VIDEO (Y/PB/PR or Y/CB/CR) OUT jacks on the DVD player.

Connecting to Audio and Video Jacks

1 Connect a set of audiocables between the AUDIOIN (1 or 2) jacks on the TVand the AUDIO OUT jackson the DVD player.

2 Connect a video cablebetween the VIDEO IN (1 or 2) jack on the TV and theVIDEO OUT jack on the DVD player.

NOTES• Component Video separates

the video into Y(Luminance(Brightness)), PB (Blue) and PR

(Red) for enhanced videoquality.

• Please be sure to match thecolor coded input terminalsand cable jacks.

DVD Player


TV Rear Panel

DVD Player


TV Rear Panel

1

1

2

2

English - 21

BP68-00586F-00Eng(016~025) 3/30/06 7:11 PM

Connecting a DTV Set-Top Box

Connecting to Y, PB, PR

1 Connect a set of audiocables between the COMPONENT (1 or 2) AUDIO (L, R) IN jacks on the TV and the AUDIO OUT jacks on the Set-Top Box.

2 Connect a set of videocables between the COMPONENT (1 or 2) VIDEO (Y, PB, PR) IN jacks on the TV and VIDEO (Y/PB/PR or Y/CB/CR) OUT jacks on the Set-Top Box.

NOTE• Please be sure to match the


Connections

English - 22

TV Rear Panel

DTV Set-Top Box


1 2

Connecting to HDMI (High Definition Multimedia Interface)

1 Connect an HDMI cablebetween the HDMI IN 1jack on the TV and the HDMIOUT jack on the Set-Top Box.

NOTE• Make sure the HDMI/DVI

source’s power is on, or youwill be unable to select it in theTV menu’s source list.

TV Rear Panel

DTV Set-Top Box


1

BP68-00586F-00Eng(016~025) 3/30/06 7:11 PM

English - 23

Connecting to DVI (Digital Visual Interface)

1 Connect a set of audiocables between the DVIAUDIO (L, R) IN jacks on theTV and the AUDIO OUTjacks on the Set-Top Box.

2 Connect an HDMI/DVI cablebetween the HDMI 2/DVI INjack on the TV and the DVIOUT jack on the Set-Top Box.

NOTES• Make sure the DVI source’s

power is on, or you will beunable to select it in theTV menu's source list.

• The HDMI/DVI IN jack is not compatible with PC.

Connecting a Digital Audio SystemThere are many types of digital audio systems on the market today.A simplified illustration of an audio system is shown below. For more information, see your audio system owner’s manual.

1 If your audio system has anoptical digital audio input,connect to the DIGITALAUDIO OUT (OPTICAL) jackon the TV.

NOTES• OPTICAL: converts the electric

signal into an optical lightsignal, and transmits it throughglass fibers.

• When a Digital audio system isconnected to the Digital AudioOut (Optical) terminal:Decrease the gain (volume) ofthe TV, and adjust the volumelevel with the audio system'svolume control.

TV Rear Panel

DTV Set-Top Box


12

TV Rear Panel

Audio System

1

BP68-00586F-00Eng(016~025) 3/30/06 7:11 PM

Connecting to an Analog Amplifier

1 The AV OUT (AUDIO L/R)terminals cannot be used for external speakers. You must hook them up to anamplifier.

When an audio amplifier is connected to the AV OUT (AUDIO L/R) terminals: Decrease the gain (volume) of the TV, and adjust thevolume level with the volumecontrol audio amplifier.

NOTE• If using the HDMI/DVI, PC, or

Component input on the TV, theaudio output signal is availableonly when the TV’s Internal Muteis set to on. (Refer to page 79)

Connections

English - 24

TV Rear Panel

Amplifier

1

When “Internal mute” is set to “On”, Sound menus except “Multi-Track Options” and “Digital Output”cannot be adjusted.

RFAV

S-Video

ComponentPC

HDMI

InternalMute Off

InternalMute On

Internal Speakers

InternalMute Off

InternalMute On

Audio Out (Optical, L/R Out)Video Output

Active

Active

Active

Active

Active

Active

Active

Inactive

Inactive

Inactive

BP68-00586F-00Eng(016~025) 3/30/06 7:11 PM

Operation

BP68-00586F-00Eng(016~025) 3/30/06 7:11 PM

Turning the TV On and OffPress the POWER button on the remote control.You can also use the POWER button on the front panel.

Plug & Play FeatureWhen the TV is initially powered On, basic customer settings proceed automatically and subsequently:Setting the language, checking the antenna input, memorizing the channels, and setting the time.

NOTE• The Plug & Play function operates after plugging in the TV for the first time.

English - 26

Operation

1 Press the POWER button on the remotecontrol. The message “Menu language,Channels and Time will be set.” is displayed.Press the ENTER button, then the Language menu is displayed.

2 Press the ENTER button to enter the language. Press the … or † button toselect language, then press the ENTERbutton. “Selects the antenna to executethe Auto Program Function.” menu is automatically displayed.

3 Press the … or † button to memorize the channels of the selected connection. Press the ENTER button to select “Start”.

Continued...

Plug & Play

Skip

Select the language of the OSD.

Language EnglishEspañolFrançais

Plug & Play

Enter Skip

Air

Cable

Air+Cable

Selects the antenna to execute theAuto Program function.

Start

Start

Start

Move

EnterMove

• If the antenna is connected to ANT 1IN (CABLE), select “Cable” and if it is connected to ANT 2 IN (AIR), select “Air”.

• If both ANT 1 IN and ANT 2 IN areconnected, select the “Air + Cable”.

• The Language menu will automaticallyappear after several seconds, even ifthe ENTER button is not pressed.

• The message to check the connectedstatus of the antenna is displayed.

Menu language, Channels andTime will be set.i

Start

BP68-00586F-00Eng(026~047) 3/30/06 7:12 PM

English - 27

4 Press the ENTER button to start the autoprogram. By default, the cable TV systemis set to “STD”.If you want to select another type of cable system, press the œ button and use the … or † button to select “STD”, “HRC” or “IRC”. Press the ENTER button.

5 The TV will begin memorizing all of theavailable channels. After all the available channels arestored, the Auto program menu reappears. Press the ENTER button at any time to interrupt the memorizationprocess. Press the ENTER button, then the menu to set the clock mode is automatically displayed.

6 Press the ENTER button to select “ClockMode”.Press the … or † button to select “Auto”or “Manual”, then press the ENTER button.

Continued...

Plug & Play

Enter Skip

Selects a cable signal type for yourlocation.

Move

StartHRCIRC

Auto Program

Skip

Auto Program is incomplete.14 channels are memorized.Air : 9 Cable : 5

Plug & Play

Sets the current time manually or automatically.

Clock Mode

• STD, HRC, and IRC identify varioustypes of cable TV systems. Contactyour local cable company to identifythe type of cable system that exists inyour particular area. At this point thesignal source has been selected.

Enter SkipMove

Auto Program

Enter Skip

Auto program in progress.Cable 2637%

Stop

AutoManual

STD

BP68-00586F-00Eng(026~047) 3/30/06 7:12 PM

Option 1: Setting the Clock AutomaticallyIf you set “Clock Mode” to “Auto” in step 6, follow the instructions below.

7 Press the ENTER button to select“DST”(Daylight Saving Time).Press the … or † button to select “Off” or“On”, then press the ENTER button.

8 Press the … or † button to select timezone, then press the ENTER button.

Press the … or † button to highlight thetime zone for your local area (and tomove the highlight to the appropriate timezone on the map of the United States),then press the ENTER button.

9 The message “Enjoy your watching.” is displayed. When you have finished, press the ENTER button.

Operation

• When you set up Auto Time, the set time maynot be correct depending on the broadcastingstation and signal. If there is a differencebetween the real time and set time, please setthe time manually.

Plug & Play

Enter Skip

Select the time zone where you are located.

Move

NewfoundlandAtlanticEasternCentral

MountainPacificAlaskaHawaii

Plug & Play

Set to daylight saving time.

DST

Enjoy your watching.iOK

Option 2: Setting the Clock ManuallyIf you set “Clock Mode” to “Manual” in step 6, follow the instructions below.

7 Press the œ or √ button to move to“Month”, “Day”, “Year”, “Hour”,“Minute”, or “am/pm”. Set the clock you want by pressing the … or † button, then press the ENTER button.

8 The message “Enjoy your watching.” is displayed. When you have finished, press the ENTER button.

Plug & Play

Enter the current date and time.

Hour Minute am/pm

- - - - - -

Month Day Year▲

- - - - ----▼

Adjust SkipMove

Enjoy your watching.iOK

• You can set the month, day,year, hour and minute directlyby pressing the number buttonson the remote control.

English - 28

Enter SkipMove

Enter

OffOn

BP68-00586F-00Eng(026~047) 3/30/06 7:12 PM

English - 29

Viewing the Menus and On-Screen DisplaysThe on-screen menu system allows you to control the settings of your TV. Access the on-screen menu system by pressing the MENU button on the remote control. Once the on-screen menu appears, usethe …/†/œ/√/ENTER buttons on your remote control to select menu items and make adjustments. You can also view the on-screen menu system and make some adjustments using the TV’s side panelbuttons.

Viewing the Menus

1 Press the MENU button.The main menu is displayed.There are five menu groups:“Input”, “Picture”, “Sound”,“Channel”, and “Setup”.

2 Press the … or † button toselect an item you want in the menu. Press the œ, √ or ENTER button to display, change, or use the selected items.Use the ENTER button toenter items in the menu.

3 Press the EXIT button to exit.

Viewing the DisplayPress the INFO button on theremote control. The TV displays the current channel, the status of certain picture, sound settings and the current time.The information displayed variesaccording to the selected source.

Air 3

Picture ModeSound ModeMTSCaptionV-Chip12:00 am

: Dynamic: Custom: Mono: Off : Off

Picture

Mode : Dynamic √

Size : 16:9 √

Digital NR : On √

DNIe : On √

My Color Control √

Film Mode : Off √

Move Enter Return

Input

Source List : TV √

Edit Name √

Move Enter Exit

Mono

BP68-00586F-00Eng(026~047) 3/30/06 7:12 PM

English - 30

Operation

Selecting a Menu Language

1 Press the MENU button. Press the … or † button toselect “Setup”, then press theENTER button.

2 Press the ENTER button toselect “Language”.Press the … or † button toselect “English”, “Español” or “Français”, then press theENTER button.

Press the EXIT button to exit.

Setup

Language : English √

Time √

Game Mode : Off √

V-Chip √

Caption √

Menu Transparency : Medium √

Blue Screen : Off √

Move Enter Return

Setup

Language : EnglishTimeGame Mode : OffV-ChipCaptionMenu Transparency : MediumBlue Screen : Off

Move Enter Return

† More

† More

EnglishEspañolFrançais

BP68-00586F-00Eng(026~047) 3/30/06 7:12 PM

English - 31

Memorizing the ChannelsYour TV can memorize and store all of the available channels for both “off-air” (antenna) and cable channels. After the available channels are memorized, use the CH and CH buttons to scanthrough the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels(automatic) and adding and deleting channels (manual).

1 Press the MENU button. Press the … or † button toselect “Channel”, then pressthe ENTER button.

2 Press the ENTER button toselect “Antenna”. Press the … or † button toselect “Air” or “Cable”, thenpress the ENTER button.

3 Press the … or † button toselect “Auto Program”, thenpress the ENTER button.

Continued...

NOTE• All available DTV and analog channels are automatically stored

in memory.

Selecting the Video Signal SourceBefore your television can begin memorizing the available channels,you must specify the type of signal source that is connected to the TV(i.e., an antenna or cable system).

Channel

Antenna : CableAuto ProgramChannel ManagerNameFine TuneSignal StrengthLNA : On

Move Enter Return

Channel

Antenna : Air √

Auto Program √

Channel Manager √

Name √

Fine Tune √

Signal Strength √

LNA : On √

Move Enter Return

Channel

Antenna : Air √

Auto Program √

Channel Manager √

Name √

Fine Tune √

Signal Strength √

LNA : On √

Move Enter Return

AirCable

BP68-00586F-00Eng(026~047) 3/30/06 7:12 PM

Operation

English - 32

4 Press the … or † button to select theAntenna connection, then press theENTER button.

When selecting Cable TV system:Press the ENTER button to start the autoprogram. By default, the cable TV systemis set to “STD”.If you want to select another type of cable system, press the œ button and use the … or † button to select “STD”, “HRC” or “IRC”. Press the ENTER button.

5 Press the √ button to select “Start”, thenpress the ENTER button to start the autoprogram. The TV begins memorizing allavailable stations. Press the ENTER buttonat any time to interrupt the memorizationprocess.


• STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable systemthat exists in your particular area. At this point the signal source has been selected.

Auto Program

Move Enter Return

• The TV must be connected to anantenna in order to receive digital TVsignals. Even if a particular channelis deleted from the memory, you canalways tune to that channel directlyby using the number buttons on theremote control.

Selects the antenna to execute the AutoProgram function.

Air

Cable

Air+Cable

Start

Start

Start

Auto Program

Enter Return

Selects a cable signal type for your location.

HRCIRC

Start

Move

Auto Program

Selects a cable signal type for your location.

HRCIRC

Start

Move Enter Return

• Air : “Air” antenna signalCable : “Cable” antenna signalAir+Cable : “Air” and “Cable”

antenna signals

STD

STD

Auto Program

Enter Return

Auto program in progress.Cable 26

Stop

37%

BP68-00586F-00Eng(026~047) 3/30/06 7:12 PM

English - 33

Changing ChannelsUsing the Channel Buttons

When you press the CH or CH button, the TV changes channels in sequence. You will see all the channels that the TV has memorized. (The TV must have memorized at least three channels.)You will not see channels that were either erased or not memorized.

Using the Number ButtonsUse the number buttons to quickly switch to any channel.

Using the “-” ButtonThe “-” button is used to select stations that broadcast both a digital and analog signal.

For example, for channel 7-1 (digital), press “7”, then “-”, then “1”.

For channel 7-2 (analog), press“7”, then “-”, then “2”.

Using the Previous ChannelPress the PRE-CH button. The TV changes to the last channel you were watching.

Press the CH or CH button to change channels.

Press the number buttons to go directly to a channel. For example, to select channel 27, press“2,” then “7.” The TV will change channels when you press the second number.

NOTE• HD indicates the TV is

receiving a Digital HighDefinition signal.SD indicates the TV isreceiving a Analog standard definition signal.

DTV Air7-11080i 16:9English

Picture Mode : DynamicSound Mode : CustomMTS : EnglishCaption : OffV-Chip : Off12:00 am

Air 7-2

Mono

Picture Mode : DynamicSound Mode : CustomMTS : MonoCaption : OffV-Chip : Off12:00 am

BP68-00586F-00Eng(026~047) 3/30/06 7:12 PM

Operation

English - 34

Customizing Your Remote ControlAfter it has been set up properly, your remote control can operate in five different modes: TV, VCR,Cable, DVD, or Set-Top Box. Pressing the corresponding button on the remote control allows you toswitch between these modes, and control whichever piece of equipment you choose.

NOTE• The remote control might not be compatible with all DVD Players, VCRs, Cable boxes,

and Set-Top Boxes.

Setting Up the Remote to Operate Your VCR

1 Turn off your VCR.

2 Press the VCR button on your TV’s remote control.

3 Press the SET button on your TV's remote control.

4 Using the number buttons on your remote control, enter threedigits of the VCR code listed on page 38 of this manual for yourbrand of VCR. Make sure you enter three digits of the code, evenif the first digit is a “0”. (If more than one code is listed, try thefirst one.)

5 Press the POWER button on the remote control. Your VCR shouldturn on if your remote is set up correctly.

If your VCR does not turn on after set-up, repeat steps 2, 3 and 4,but try one of the other codes listed for your brand of VCR.If no other codes are listed, try each VCR code, 000 through 080.

Note on Using Remote Control Modes: VCRWhen your remote control is in “VCR” mode, the volume buttons stillcontrol your TV’s volume.

BP68-00586F-00Eng(026~047) 3/30/06 7:12 PM

English - 35

Setting Up the Remote to Operate Your Cable Box

1 Turn off your cable box.

2 Press the CABLE button on your TV’s remote control.


4 Using the number buttons on your remote control, enter threedigits of the cable box code listed on page 39 of this manual foryour brand of cable box. Make sure you enter three digits of thecode, even if the first digit is a “0”. (If more than one code is listed, try the first one.)

5 Press the POWER button on the remote control.Your cable box should turn on if your remote is set up correctly.

If your cable box does not turn on after set-up, repeat steps 2, 3and 4, but try one of the other codes listed for your brand of cablebox. If no other codes are listed, try each code, 000 through 046.

Note on Using Remote Control Modes: Cable BoxWhen your remote control is in “CATV” mode, the volume buttons still control your TV’s volume.

BP68-00586F-00Eng(026~047) 3/30/06 7:12 PM

Operation

English - 36

Setting Up the Remote to Operate Your DVD

1 Turn off your DVD.

2 Press the DVD button on your TV’s remote control.


4 Using the number buttons on your remote control, enter threedigits of the DVD code listed on page 40 of this manual for yourbrand of DVD. Make sure you enter three digits of the code, evenif the first digit is a “0”. (If more than one code is listed, try thefirst one.)

5 Press the POWER button on the remote control.Your DVD should turn on if your remote is set up correctly.

If your DVD does not turn on after set-up, repeat steps 2, 3 and 4,but try one of the other codes listed for your brand of DVD. If noother codes are listed, try each code, 000 through 141.

Note on Using Remote Control Modes: DVDWhen your remote control is in “DVD” mode, the volume buttons still control your TV’s volume.

BP68-00586F-00Eng(026~047) 3/30/06 7:12 PM

English - 37

Setting Up the Remote to Operate Your Set Top Box

1 Turn off your STB.

2 Press the STB button on your TV’s remote control.


4 Using the number buttons on your remote control, enter threedigits of the STB code listed on page 39 of this manual for yourbrand of STB. Make sure you enter three digits of the code, evenif the first digit is a “0”. (If more than one code is listed, try thefirst one.)

5 Press the POWER button on the remote control.Your STB should turn on if your remote is set up correctly.

If your STB does not turn on after set-up, repeat steps 2, 3 and 4,but try one of the other codes listed for your brand of STB.If no other codes are listed, try each code, 000 through 074.

Note on Using Remote Control Modes: STBWhen your remote control is in “STB” mode, the volume buttons still control your TV’s volume

BP68-00586F-00Eng(026~047) 3/30/06 7:12 PM

Operation

English - 38

Remote Control Codes

continued...

VCR

BrandSAMSUNGADMIRALAIWAAKAIAUDIO DYNAMICSBELL&HOWELLBROKSONICCANDLECANONCITIZENCOLORTYMECRAIGCURTIS MATHESDAEWOODBDIMENSIADYNATECHELECTROHOMEEMERSON

FISHERFUNAIGENERAL ELECTRICGO VIDEOLG(Goldstar)HARMAN KARDONHITACHIINSTANT REPLAYJC PENNEYJCLKENWOODKLHLIOYDLOGIKLXIJVCMAGNAVOXMARANTZMARTAKONIAORIONMEIMEMOREXMGAMIDLANDMINOLTA

Code 000 001 002 003 004 005 077 078 079020025004 027 032007 026018022002 003 006 008 015 055021 056002 003 006 008 015 055007002 024002 007 008 017 021 025 056 064 066003 010 011 012 013 014 015 016007 026017025034001 003 006 021 022 025 030 032 034 040 047 050052 060 063 065 066 067 069 073018 024 028 029 048 051 061025002 005 017 021 056002006 007 008 009 010007019 025 041 042 074021002 007 018 019 021 026 037 041 054 056007 008 018 021 026 037007 008 018 026 037070025038025081 082 083021 056 059007 008 018 021 026 037 062006036073 074 075 076021006 021 024 025034005019 041 075

BrandMITSUBISHIMONTGOMERY WARDMTCMULTITECHNECOPTIMUSPANASONICPENTAXPENTEX RESEARCH+PHILCOPHILIPSPIONEERPORTLANDPROSCANQUARTZQUASARRADIO SHACK/REALISTICRCASANSUISANYOSCOTTSEARSSHARPSHIMTOMSIGNATURESONYSYLVANIASYMPHONICTANDYTASHIKATATUNGTEACTECHNICSTEKNIKATMKTOSHIBATOTEVISIONUNITECHVECTOR RESEARCHVICTORVIDEO CONCEPTSVIDEOSONICWARDSYAMAHAZENITH

Code019 034 041 046020002 025002 005 025 038007 008 018 026 037 062 064020021 056 071 072019 041 075008021 056 059021 080019 026 039 053015 049 055017018021 056006 018 020 021 024 025 029 034 048 056002 017 019 021 035 041 043 057 068 076026018 024003 047 052 067006 018 019 024 028 029 041 048 051020 034 045 015027 033 038 058025027 033 044021 025 056 059025018 025006037025 037 068021006 021 025 031066003 019 029 051 052002 006002007 026026007 026002002 003 006 019 020 021 024 025 034 038 041007 008 018 026 037023 027 033

BP68-00586F-00Eng(026~047) 3/30/06 7:12 PM

English - 39


continued...

CABLE BOX

Brand SAMSUNGGIHAMLINHITACHIJERROLDMACOMMAGNAVOXOAKPANASONICPHILIPSPIONEERRCAREGAL

Code 000 001 002 003 004 005 006 007041003 024 031025 030038 039025 030019 023 028026003 022 027 037 044019 021 023 028004 018 020 044014 022 040003

Brand REGENCYSASCIENTIFIC ATLANSPRUCERSTARGATE 2000SYLVANIATEXSCANTOCOMUNIVERSALVIEWSTARWAMER AMEXZENITH

Code 015 023042 043042 043022036016016032033 034019 021 023 028046017 029 035 037 045

SAMSUNG SET-TOP BOX

Product Ground wave STBSatellite STBCABLE STBSTB DVD COMBOSatellite STB HDD COMBO Standard

Code 001 002003004008009

Product Satellite STB HDD COMBO PremiumCABLE STB HDD COMBO StandardCABLE STB HDD COMBO PremiumGround wave STB HDD COMBO StandardGround wave STB HDD COMBO Premium

Code 010011012013014

SET-TOP BOX

Code 023043018 034019035015 016 017 019 022 045 060 061 062 065 066 067068074069 070069018 024 032027025 069 070 071069069065046 047 048 063 064069056022015 017020020059063069 070

Brand ALPHASTARANAMCHANNEL MASTERCROSSDIGITALCHAPARRALDIRECT TV

DAEWOODISH NETWORK SYSTEMDISHPRODRAKEDX ANTENNAECHOSTAREXPRESSVUGOIGEGENERAL INSTRUMENTHTSHOME CABLEHITACHIHUGHES NETWORKIQIQ PRISMJANEILJERROIDJVC

Brand LG(Goldstar)MAGNAVOXMEMOREXMOTOROLAMACOMMITSUBISHINEXT LEVELPHILIPSPRIMESTARPANASONICPAYSATPROSCANRCARADIOSHACKREALISTICSTSSTAR TRAKSKYSKY LIFESHACKSTAR CHOICESONYTOSHIBAULTIMATE TVUNIDENZENITH

Code 044 073016 021 036 038 039 040 041 042016064018015047 048 064015 016 017 021 033 036 038 039 040 041 042 067046 049 050 063058 059 061 062016065 066051 052 053 065 066064057020 027026031005 006 007064064054 060015 017 028 029 030 072060 066016 021 037 055 056 057024 031 068

BP68-00586F-00Eng(026~047) 3/30/06 7:12 PM

Operation

English - 40


SAMSUNG DVD

Product DVDDVDRBD RecordVCR COMBOVCR RecordDHR COMBO

Code 000 001 002003 004005 006007 008 009 010 011 012013

Product Home Theater VCR COMBOHDD Record COMBOTWIN TRAY COMBOSTB DVD COMBODVD ReceiverAV Receiver

Code 014 015 016017018019020021

DVD

Code 030075085072070 071 074 086 083 084 088 111 112114062074122 123027065 077 078 079 082080 125081095066146067 068090060061 089 133 135069 074074064 113071073091 110089092091022 033 115 116073051 108 109073059 100 106 107074 075025 031057058054055056076 093074 094073

Brand ANAMAUDIOVOXAUDIOLOGICANABAAPEX DIGITALAIWABROKSONICBLAUPUNKTB&KCURTIS MATHESCYBER HOMECLARIONCIRRUSCINEVISIONDAEWOODENONFARENHEITFISHERGPXGO VIDEOGEGREENHILLHITACHIHITEKERHOYOHARMAN / KARDONIRTINTEGRAJBLJVCJATONKENWOODKISSKONKAKLHLG(Goldstar)LOEWELASONICMOBILE AUTHORITYMEMOREXMALATAMAGNAVOXMINTEKMONYKA

Brand NORCENTNEXT BASENECNANTAUSNESAOPTOMEDIA ELECTRONICSOPTIVIEWONKYOPHILCOPRINCETONPROSCANPANASONICPHILIPSROTELRIORCARAITEROWASAMPOSONYSHERWOODSVASYLVANIASHARPSANSUISANYOSHINSONICSANYOTHOMSONTOSHIBATECHNICSTVIEWTOKAITEACTECHWOODTREDEXURBAN CONCEPTSVENTURERVOCOPROYAMAHAYAMAKAWAXWAVEZENITH

Code 048 049 050052053144074105072076 092 119044 045046 047023024 034 124 134 136 137 138036 076117 118120023 035 074 075 131 132073038104026 029 126 127 128 129 130 141039 041042043 093140062062094090145028 062 076139072073096097098 099 101076075102032 063040 073103076 121

BP68-00586F-00Eng(026~047) 3/30/06 7:12 PM

English - 41

Setting the ClockSetting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching the TV. (Just press the INFO button.)

1 Press the MENU button. Press the … or † button toselect “Setup”, then press the ENTER button.

2 Press the … or † button toselect “Time”, then press theENTER button.Press the ENTER button toselect “Clock”.

3 Press the ENTER button toselect “Clock Mode”.Press the … or † button toselect “Manual”, then pressthe ENTER button.

4 Press the … or † button toselect “Clock Set”, then press the ENTER button.

5 Press the œ or √ button tomove to “Month”, “Day”,“Year”, “Hour”, “Minute”,or “am/pm”. Set the clockyou want by pressing the… or † button, then pressthe ENTER button.


Option 1: Setting the Clock Manually

• You can set the month,day, year, hour and minutedirectly by pressing the numberbuttons on the remote control.

Time

--/ --/ ----/ -- : -- --

Clock √

Sleep Timer : Off √

On Timer : Inactivated √

Off Timer : Inactivated √

Move Enter Return

Clock

Clock Mode : AutoClock SetTime ZoneDST : Off

Move Enter Return

Clock

Clock Mode : Manual √

Clock Set √

Time Zone √

DST : Off √

Move Enter Return

Clock Set

Move Adjust Return

Enter the current date and time.

Hour Minute am/pm

- - - - - -

Month Day Year▲

- - - - ----▼

NOTE• The current time will

appear every time youpress the INFO button.

Setup


Time √

Game Mode : Off √

V-Chip √

Caption √



Move Enter Return

† More

ManualAuto

BP68-00586F-00Eng(026~047) 3/30/06 7:12 PM

English - 42

Operation

Option 2: Setting the Clock AutomaticallyThe Clock can be set automatically if you are receiving a digital signal.

1 Press the MENU button. Press the … or † button to select “Setup”,then press the ENTER button.

2 Press the … or † button to select “Time”,then press the ENTER button.Press the ENTER button to select “Clock”.

3 Press the ENTER button to select “ClockMode”.Press the … or † button to select “Auto”,then press the ENTER button.

4 Press the … or † button to select “TimeZone”, then press the ENTER button.

Press the … or † button to highlight thetime zone for your local area (and tomove the highlight to the appropriate timezone on the map of the United States),then press the ENTER button.

5 Press the … or † button to select“DST”(Daylight Saving Time), then pressthe ENTER button.Press the … or † button to select “Off” or“On”, then press the ENTER button.


• When you set up Auto Time, the set time maynot be correct depending on the broadcastingstation and signal. If there is a differencebetween the real time and set time, please setthe time manually.

Clock


Move Enter Return

Clock


Move Enter Return

Time Zone

Select the time zone where you are located.

Move Enter Return

Time

--/ --/ ----/ -- : -- --

Clock √




Move Enter Return

Setup


Time √

Game Mode : Off √

V-Chip √

Caption √



Move Enter Return

† More

NewfoundlandAtlanticEasternCentral

MountainPacificAlaskaHawaii

ManualAuto

OffOn

BP68-00586F-00Eng(026~047) 3/30/06 7:12 PM

English - 43

Setting the On/Off Timer

1 Press the MENU button. Press the … or † button toselect “Setup”, then pressthe ENTER button.

2 Press the … or † button toselect “Time”, then press theENTER button.Press the … or † buttonto select “On Timer”, thenpress the ENTER button.Press the … or † button toadjust “Hour”, then pressthe √ button to move to thenext step.Set other items using thesame method as above.

To activate On Timer withthe setting entered, setActivation to “Yes” by pressing … or † button.

When finished, press the MENU button to return.

3 Press the … or † button toselect “Off Timer”, thenpress the ENTER button. Press the … or † button toadjust “Hour”, then pressthe √ button to move to thenext step. Set other itemsusing the same method asabove.

To activate Off Timer with the setting entered, set Activation to“Yes” by pressing … or † button.When finished, press the EXIT button to exit.

• You can set the hour, minute, and channel directly by pressing the number buttons on the remote control.

On Timer

Move Adjust Return

Enter the On Timer options.

Channel Volume Activation

3 10 No

Hour Minute am/pm Antenna▲

12 00 am Air▼

Off Timer

Move Adjust Return

Enter the Off Timer options.

Hour Minute am/pm Activation▲

12 00 am No▼

NOTE• Auto Power Off

When you set the timer“On”, the television willeventually turn off, if nocontrols are operated for 3hours after the TV wasturned on by the timer. Thisfunction is only available intimer “On” mode andprevents overheating, whichmay occur if a TV is on fortoo long (when you are onvacation, for example).

Time

1/ 1/2005/ 12 : 00 am

Clock √




Move Enter Return

Setup


Time √

Game Mode : Off √

V-Chip √

Caption √



Move Enter Return

† More

BP68-00586F-00Eng(026~047) 3/30/06 7:12 PM

English - 44

Operation

Setting the Sleep TimerThe sleep timer automatically shuts off the TV after a preset time (from 30 to 180 minutes).

1 Press the MENU button. Press the … or † button toselect “Setup”, then press the ENTER button.

2 Press the … or † button toselect “Time”, then press theENTER button.Press the … or † button toselect “Sleep Timer”, thenpress the ENTER button.

3 Press the … or † button toadjust “Minute”.

4 Setting the Timer sets theActivation to “Yes” automatically.


Alternate methodPress the SLEEP button on theremote control repeatedly until theappropriate time interval appears(any of the preset values from “30min” to “180min”).

Time

1/ 1/2005/ 12 : 00 am

Clock √




Move Enter Return

Sleep Timer

Move Adjust Return

Sets the Sleep Timer options.

Minute Activation

--- No▲

▼

Sleep Timer

Move Adjust Return

Sleep Timer : 90min

Setup


Time √

Game Mode : Off √

V-Chip √

Caption √



Move Enter Return

† More

Sets the Sleep Timer options.

Minute Activation

30 Yes▲

▼

BP68-00586F-00Eng(026~047) 3/30/06 7:12 PM

English - 45

Viewing an External Signal SourceUse the remote control to switch between viewing signals from connected equipment,such as a VCR, DVD, Set-Top Box or the TV source (broadcast or cable).

Setting the Signal Source

1 Press the MENU button. Press the ENTER button toselect “Input”.

2 Press the ENTER button toselect “Source List”.Press the … or † button toselect a signal source, thenpress the ENTER button.

Alternate methodPress the SOURCE button on theremote control repeatedly to select an external signal source.

NOTES• Only connected devices can be selected.• Before selecting an input source, connect an external device first.• HDMI input can be selected only when the external device is

turned on and connected to the TV.

AV1

• When you connect equipment to the TV, you can choose between the following sets of jacks: “AV1”, “AV2”, “S-VIDEO1”, “S-VIDEO2”, “COMPONENT1”,“COMPONENT2”, “PC”, “HDMI1”, or “HDMI2” on the TV’srear panel and “AV3”or “S-VIDEO3” on the TV’s side panel.

Input


Edit Name √

Move Enter Return

Source List

TVAV1 : ----AV2 : ----AV3 : ----S-Video1 : ----S-Video2 : ----S-Video3 : ----

Move Enter Return

† More

BP68-00586F-00Eng(026~047) 3/30/06 7:12 PM

English - 46

Operation

Assigning Names to External Input ModeThis feature enables you to name the input source you have connected.

1 Press the MENU button. Press the ENTER button toselect “Input”.

2 Press the … or † button toselect “Edit Name”, thenpress the ENTER button.

3 Press the … or † button toselect a signal source toedit, then press the ENTERbutton.

4 Press the … or † button toselect the external device :VCR, DVD, D-VHS, CableSTB, HD STB, Satellite STB,PVR STB, AV Receiver,DVD Receiver, Game,Camcorder, DVD Combo,DVD HDD Recorder, PC,Internet TV Recv., Interactive TV Recv., VOD (Video On Demand) STB, TV.

Press the ENTER button. Set other signal sources (AV2, AV3, S-Video1, S-Video2, S-Video3,Component1, Component2,PC, HDMI1, HDMI2)using the same methodas listed above.


Input


Edit Name √

Move Enter Return

Input


Edit Name √

Move Enter Return

Edit Name

AV1 : ---- √

AV2 : ---- √

AV3 : ---- √

S-Video1 : ---- √

S-Video2 : ---- √

S-Video3 : ---- √

Component1 : ---- √

▼ More

Move Enter Return

Edit Name

AV1 : ----AV2 : ---AV3 : ---S-Video1 : ---S-Video2 : ---S-Video3 : ----Component1 : ----

▼ More

Move Enter Return

----VCRDVDD-VHSCable STBHD STBSatellite STB

▼

BP68-00586F-00Eng(026~047) 3/30/06 7:12 PM

Channel Control

BP68-00586F-00Eng(026~047) 3/30/06 7:12 PM

English - 48

To Store Your Favorite Channels:


2 Press the … or † button toselect “Channel Manager”,then press the ENTER button.

3 Press the ▲ or ▼ button toselect “All” or “Added”, then press the ENTER button.Press the …/†/œ/√ buttonto select a channel, then press the ENTER button andoption window will appear.

4 Press the … or †button to select“Favorite”, then pressthe ENTER button anda mark is activated.Press the ENTER buttonagain to deselect theselected channel andthe mark isdeactivated.

• Red button(List Mode) : If youpress the Red buttonrepeatedly, the AllChannel List, theAdded Channel List or the Favorite Channel List is selectedsequentially.

• Yellow button : Press to delete all channels memorized.


NOTE• Only memorized channels can be set as favorite channels.

Channel Control

Selecting Your Favorite ChannelsYou can store your favorite channels for each available input source (such as TV and Cable box).Then, when you press the FAV.CH button on the remote control, the TV displays only the favoritechannels you previously stored, allowing you to quickly and easily find frequently watched channels.

Preset : To use the Channel Manager function, first run Auto Program (see page 31).

Channel

Antenna : Air √

Auto Program √

Channel Manager √

Name √

Fine Tune √

Signal Strength √

LNA : On √

Move Enter Return

Channel Manager

All √

Added √

Favorite √

Default List mode : All √

Move Enter Return

Channel Manager /All

List Mode Delete All

Move Enter Return

Air 2

Air 2Air 3Air 4Air 5Air 6Air 7Air 8


Air 16



Move Enter Return

Air 2



Air 16WatchAdd

DeleteFavorite

BP68-00586F-00Eng(048~059) 3/30/06 7:13 PM

English - 49

To View Your Favorite Channels list:



3 Press the … or †button to select“Favorite”, then pressthe ENTER button.

• The favorite channellist will appear.


NOTE• Watch, Add, Delete, or Favorite setting on the channel is

available in the Favorite channel list.

To Watch Favorite channels:Press the FAV.CH button repeatedly to jump from one favoritechannel to another.

Channel

Antenna : Air √

Auto Program √

Channel Manager √

Name √

Fine Tune √

Signal Strength √

LNA : On √

Move Enter Return

Channel Manager

All √

Added √

Favorite √


Move Enter Return

Channel Manager / Favorite


Move Enter Return

Air 2



Air 16

BP68-00586F-00Eng(048~059) 3/30/06 7:13 PM

English - 50

Channel Control

Viewing the Channel ListsYou can display a list of all channels or your favorite channels.




3 Press the ENTER button toselect “All”. If you want towatch the channel, press the…/†/œ/√ button to select a channel, then press the ENTERbutton and option window will appear.

4 Press the ENTER button toselect “Watch”, thenpress the ENTER buttonagain.The selected channelbroadcasting window will appear.

• Red button(List Mode) : If youpress the Red buttonrepeatedly, the AllChannel List, theAdded Channel Listor the FavoriteChannel List is selected sequentially.

• Yellow button : Press to delete all channels memorized.

Alternate methodPress the CH MGR buttonon the remote control todisplay a list of channels.

Channel

Antenna : Air √

Auto Program √

Channel Manager √

Name √

Fine Tune √

Signal Strength √

LNA : On √

Move Enter Return

Channel Manager

All √

Added √

Favorite √


Move Enter Return



Move Enter Return

Air 5



Air 16

WatchAdd

DeleteFavorite



Move Enter Return



Air 16

Channel Manager / All


Move Enter Exit

Air 2



Air 16

BP68-00586F-00Eng(048~059) 3/30/06 7:14 PM

English - 51

Editing the Channel ListsYou can edit channels to be added or deleted.




3 Press the … or †button to select“Added”, then pressthe ENTER button.

• All channels on theChannel Managerare added anddisplayed.

Press the …/†/œ/√ button to select a channel, then press theENTER button and an option window will appear.

Continued...

Channel

Antenna : Air √

Auto Program √

Channel Manager √

Name √

Fine Tune √

Signal Strength √

LNA : On √

Move Enter Return

Channel Manager

All √

Added √

Favorite √


Move Enter Return

Channel Manager / Added


Move Enter Return

Air 2



Air 16

BP68-00586F-00Eng(048~059) 3/30/06 7:14 PM

English - 52

Channel Control

4 Press the ▲ or ▼ button to select“Delete” to delete a channel, thenpress the ENTER button; the

mark will disappear.To select the deselected channel, select “Add” to add a channel bypressing the ▲ or ▼ button.The mark will appear.

• Red button (Channel Mode) :If you press the Red buttonrepeatedly, the All Channel List,the Added Channel List or theFavorite Channel List is selectedsequentially.


Channel Manager /Added


Move Enter Return

Air 2



Air 16WatchAdd

DeleteFavorite

Channel Manager /Added

List Mode Add All Delete All

Move Enter Return

Air 2



Air 16WatchAdd

DeleteFavorite

BP68-00586F-00Eng(048~059) 3/30/06 7:14 PM

English - 53

Default List modeYou can set All, Added or Favorite to be the Default List that appears when you press the CH MGRbutton.



3 Press the … or †button to select“Default List mode”,then press the ENTER button.Press the … or †button to select “All”,“Added”, or “Favorite”,then press the ENTER button.

• All: All of the memorized channels• Added : Added channels• Favorite : Favorite channels

4 Press the CH MGRbutton on the remotecontrol, then DefaultList mode will bedisplayed.

Channel

Antenna : Air √

Auto Program √

Channel Manager √

Name √

Fine Tune √

Signal Strength √

LNA : On √

Move Enter Return

Channel Manager

All √

Added √

Favorite √


Move Enter Return

Channel Manager

AllAdded FavoriteDefault List mode : All

Move Enter Return

Channel Manager / Added


Move Enter Exit

Air 2



Air 16

AllAddedFavorite

BP68-00586F-00Eng(048~059) 3/30/06 7:14 PM

English - 54

Channel Control

Labeling the ChannelsUse this feature to assign an easy-to-remember label to analog channels (i.e., “CBS”, “ESPN”,“PBS2”, CNN02”, etc.) A label consists of five fields, where each field is a letter, a number or ablank. When the INFO button is pressed, the channel label will appear below the channel number.

1 Press the CH or CH button to tune to the channel thatwill be labeled.

2 Press the MENU button. Press the … or † button toselect “Channel”, then pressthe ENTER button.Press the … or † button toselect “Name”, then press the ENTER button.

3 Press the … or † button tomove to the channel to beassigned to a new name,then press the ENTER button.Press the … or † button toselect a letter, a number or ablank. (Results in thissequence: A...Z, 0...9, +, -,✽, /, blank).

4 Press the √ button to switchto the next field, which will be selected. Select a second letter or digitpressing … or † button, asabove.Repeat the process to selectthe last three digits. Press the ENTER button.

After all settings are completed, select “OK” using the √ button.Press the ENTER button to save the settings and return to the previous menu.

To erase the assigned new name, select “Clear” by pressing the œ or √ button, then press the ENTER button.


NOTE• If you add or delete a TV channel, the channel label (if set) will

also be added or deleted.

Channel

Antenna : Air √

Auto Program √

Channel Manager √

Name √

Fine Tune √

Signal Strength √

LNA : On √

Move Enter Return

Name

Move Adjust Return

Air 2 A

Air 3 -----

Air 4 -----

Air 5 -----

Air 6 -----

▲

▼

▼

OKClear

Clear

Clear

Clear

Clear

Name

Move Adjust Return

Air 2 CNN02

Air 3 -----

Air 4 -----

Air 5 -----

Air 6 -----

▼

OKClear

Clear

Clear

Clear

Clear

▲

▼

BP68-00586F-00Eng(048~059) 3/30/06 7:14 PM

English - 55

Fine Tuning Analog ChannelsUse fine tuning to manually adjust a particular channel for optimal reception.


2 Press the … or † button toselect “Fine Tune”, then pressthe ENTER button.

3 Press the œ or √ button toadjust the fine tuning.

4 To store the fine tuning setting in the TV’s memory,press the ENTER button. To reset the fine tuningsetting, press the † button toselect “Reset”, then press theENTER button.


NOTES• Only analog TV channels can be fine tuned.• “*” will appear next to the name of fine-tuned channels.

Channel

Antenna : Air √

Auto Program √

Channel Manager √

Name √

Fine Tune √

Signal Strength √

LNA : On √

Move Enter Return

Channel

Antenna : Air √

Auto Program √

Channel Manager √

Name √

Fine Tune √

Signal Strength √

LNA : On √

Move Enter Return

Fine Tune

Fine Tune

Air 26 Not Fine Tuned

0

Adjust Save Return

0

Reset

0

Reset

00

Reset

Air 26 Not Fine Tuned

0

Reset

Fine Tune

Air 26* Fine Tuned

Reset

Analog

Adjust Save Return

3

Move Enter Return

BP68-00586F-00Eng(048~059) 3/30/06 7:14 PM

English - 56

Channel Control

Checking the Digital-Signal StrengthUnlike analog channels, which can vary in reception quality from “snowy” to clear, digital (HDTV) channels have either perfect reception quality or you will not receive them at all. So, unlike analog channels, you cannot fine tune a digital channel.You can, however, adjust your antenna to improve the reception of available digital channels.

1 Press the MENU button.Press the … or † button toselect “Channel”, then pressthe ENTER button.

2 Press the … or † button toselect “Signal Strength”, thenpress the ENTER button.

If the signal strength meterindicates that the signal isweak, physically adjust yourantenna to increase the signal strength. Continue toadjust the antenna until youfind the best position with the strongest signal.


Channel

Antenna : Air √

Auto Program √

Channel Manager √

Name √

Fine Tune √

Signal Strength √

LNA : On √

Move Enter Return

Channel

Antenna : Air √

Auto Program √

Channel Manager √

Name √

Fine Tune √

Signal Strength √

LNA : On √

Move Enter Return

Signal Strength

Enter Return

OK

Digital

BP68-00586F-00Eng(048~059) 3/30/06 7:14 PM

English - 57

LNA (Low Noise Amplifier)If the TV is operating in a weak-signal area, sometimes the LNA function can improvethe reception (a low-noise preamplifier boosts the incoming signal).

1 Press the MENU button.Press the … or † button toselect “Channel”, then pressthe ENTER button.

2 Press the … or † button toselect “LNA”, then press theENTER button.

3 Press the … or † button toselect “On” or “Off”, thenpress the ENTER button.


NOTES• LNA functions only when antenna is set to Air.

The settings will be stored separately in each channel. • If the picture is noisy with the LNA set to On, select Off.• The LNA setting needs to be set individually for each channel.

Channel

Antenna : Air √

Auto Program √

Channel Manager √

Name √

Fine Tune √

Signal Strength √

LNA : On √

Move Enter Return

Channel

Antenna : AirAuto ProgramChannel ManagerNameFine TuneSignal StrengthLNA : On

Move Enter Return

Channel

Antenna : Air √

Auto Program √

Channel Manager √

Name √

Fine Tune √

Signal Strength √

LNA : On √

Move Enter Return

OffOn

BP68-00586F-00Eng(048~059) 3/30/06 7:14 PM

SAMSUNG

BP68-00586F-00Eng(048~059) 3/30/06 7:14 PM

Picture Control

BP68-00586F-00Eng(048~059) 3/30/06 7:14 PM

Picture Control

English - 60

Picture ControlYou can select the type of picture which best corresponds to your viewing requirements.

Changing the Picture Standard

1 Press the MENU button.Press the … or † button toselect “Picture”, then pressthe ENTER button.

2 Press the ENTER buttonagain to select “Mode”.

3 Press the ENTER button.Press the … or † button toselect the desired picturemode (Dynamic, Standard,Movie, Custom), then pressthe ENTER button.


Alternate methodPress the P.MODE button on theremote control repeatedly to selectthe desired picture mode.

• Choose “Dynamic” for viewing the TV during the day or when there is a bright light in the room.

• Choose “Standard” for general TV watching mode.• Choose “Movie” when viewing a movie.• Choose “Custom” if you want to adjust the settings according to

personal preference (see “Customizing the Picture Settings”, page 61).

Picture

Mode : Dynamic √

Size : 16:9 √

Digital NR : On √

DNIe : On √


Film Mode : Off √

Move Enter Return

Mode

Mode : StandardContrast 90Brightness 50Sharpness 65Color 50Tint (G/R) G50 R50Color Tone : Cool1Reset

Move Enter Return

Dynamic

DynamicStandard

MovieCustom

Mode

Mode : Dynamic √

Contrast 100Brightness 45Sharpness 75Color 55Tint (G/R) G50 R50Color Tone : Cool1 √

Reset

Move Enter Return

BP68-00586F-00Eng(060~073) 3/30/06 7:14 PM

English - 61

1 Press the MENU button. Press the … or † button toselect “Picture”, then press theENTER button.

2 Press the ENTER button toselect “Mode”.

3 Press the ENTER button. Press the … or † button toselect the desired picture mode(Dynamic, Standard, Movie,Custom), then press the ENTERbutton.

4 Press the … or † button toselect a particular option(Contrast, Brightness,Sharpness, Color, or Tint), then press the ENTER button.

Press the œ or √ button todecrease or increase the valueof a particular item.

Continued...

Customizing the Picture SettingsYou can use the on-screen menus to change the “Contrast”, “Brightness”, “Sharpness”, “Color”,“Tint”, and “Color Tone” according to personal preference. You can select “Standard” which automatically recalls your personalized picture settings.

▲

Contrast▼

80• You can also select theseoptions (Contrast, Brightness,Sharpness, Color, or Tint) bypressing the … or † button.

Picture

Mode : Dynamic √

Size : 16:9 √

Digital NR : On √

DNIe : On √


Film Mode : Off √

Move Enter Return

Mode

Mode : Dynamic √


Reset

Move Enter Return

Mode

Mode : StandardContrast 90Brightness 50Sharpness 65Color 50Tint (G/R) G50 R50Color Tone : Cool1Reset

Move Enter Return

DynamicStandard

MovieCustom

Mode

Mode : Standard √


Reset

Move Enter Return

BP68-00586F-00Eng(060~073) 4/21/06 4:39 PM

Picture Control

English - 62

5 Press the ENTER button to return to“Mode”.Press the … or † button to select“Color Tone”, then press the ENTERbutton.

6 Press the … or † button to select a particular option (Cool2, Cool1, Normal,Warm1, or Warm2), then press theENTER button.

7 To return the factory defaults, select“Reset” by pressing the … or † button. Press the ENTER button.

Press the EXIT button to exit.• The previously adjusted settings will

be reset to the factory defaults.

Resetting the Picture Settings to the Factory Defaults

Mode

Mode : Standard √


Reset

Move Enter Return

Mode

Mode : Standard √


Reset

Move Enter Return

Mode

Mode : Standard √

Contrast 80Brightness 50Sharpness 50Color 50Tint (G/R) G50 R50Color ToneReset

Move Enter Return

Cool2Cool1NormalWarm1Warm2

BP68-00586F-00Eng(060~073) 3/30/06 7:14 PM

English - 63

Changing the Picture SizeYou can select the picture size which best corresponds to your viewing requirements.

1 Press the MENU button.Press the … or † button toselect “Picture”, then pressthe ENTER button.Press the … or † button toselect “Size”, then press theENTER button.

2 Press the … or † button toselect the screen format youwant, then press the ENTERbutton.


Alternate method

Press the P.SIZE button on the remote control repeatedly to select oneof the picture size settings.

• “16:9”: Sets the picture to 16:9 wide mode.

• “Zoom1”: Magnifies the size of the picture on screen.

• “Zoom2”: Magnifies the size of the picture more than “Zoom1”.

• “Wide Fit”: Enlarges the aspect ratio of the picture to fit the entire screen.

• “4:3”: Sets the picture to 4:3 normal mode.

NOTES• You can select only the 16:9 and 4:3 screen sizes in the DTV, Component (720p, 1080i) mode or

HDMI (720p, 1080i) mode.• For Zoom1 and Zoom2, you can adjust the vertical position by using the … or † button after pressing

the P.SIZE button on the remote control.• When watching a DTV signal (only 720p, 1080i), you can use Wide Fit.

Wide Fit does not support all external devices.

Picture

Mode : Dynamic √

Size : 16:9 √

Digital NR : On √

DNIe : On √


Film Mode : Off √

Move Enter Return

Size

Move Enter Return

16:9

Zoom1

Zoom2

Wide Fit

4:3

BP68-00586F-00Eng(060~073) 4/21/06 4:40 PM

Picture Control

English - 64

Digital Noise ReductionIf the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen.


2 Press the … or † button toselect “Digital NR”, thenpress the ENTER button.

3 Press the … or † button toselect “Off” or “On”, thenpress the ENTER button.


Picture

Mode : Dynamic √

Size : 16:9 √

Digital NR : On √

DNIe : On √


Film Mode : Off √

Move Enter Return

Picture

Mode : Dynamic √

Size : 16:9 √

Digital NR : On √

DNIe : On √


Film Mode : Off √

Move Enter Return

Picture

Mode : DynamicSize : 16:9Digital NR : OnDNIe : OnMy Color ControlFilm Mode : Off

Move Enter Return

OffOn

BP68-00586F-00Eng(060~073) 3/30/06 7:14 PM

English - 65

Viewing the DNIe DemonstrationThis TV includes the DNIe function so as to provide a high visual quality.If you set DNIe to Demo, you can view the applied DNIe and normal pictures on the screen fordemonstration purposes. Using this function, you can view the difference in visual quality.


2 Press the … or † button toselect “DNIe”, then press theENTER button.

3 Press the … or † button toselect “Off”, “Demo”, or“On”, then press the ENTERbutton.

• Off : Switches off the DNIemode.

• Demo : The screen before applying DNIeappears on the leftand the screenafter applyingDNIe appears onthe right.

• On : Switches on the DNIe mode.


NOTE• DNIeTM (Digital Natural Image engine)

This feature brings you more a detailed image with 3D noisereduction and detail, contrast and white enhancement.

Picture

Mode : Dynamic √

Size : 16:9 √

Digital NR : On √

DNIe : On √


Film Mode : Off √

Move Enter Return

Picture

Mode : Dynamic √

Size : 16:9 √

Digital NR : On √

DNIe : On √


Film Mode : Off √

Move Enter Return

Picture

Mode : DynamicSize : 16:9Digital NR : OnDNIe : OffMy Color ControlFilm Mode

Move Enter Return

OffDemoOn

BP68-00586F-00Eng(060~073) 3/30/06 7:14 PM

Picture Control

English - 66

Setting the My Color Control ModeMy Color Control allows you to adjust colors according to your preference, by adjusting skin, sky,and grass tones using the predefined settings (“Blue”, “Green”, “Pink”, “Standard”, and “Custom”)without affecting other colors on the screen.

Using the Easy Control Menu


2 Press the … or † button toselect “My Color Control”,then press the ENTER button.

3 Press the ENTER button toselect “Easy Control”.Press the œ or √ button toselect one of the picture settings you want.The original picture (beforeadjustment) is shown on theleft side, while the pictureafter adjustment is shown on the right side, and anadjustment bar is shown onthe bottom of the screen.

Press the ENTER button toaccept the selected mode.


• “Blue”: Emphasizes Clear Blues.• “Green”: Emphasizes Mild Greens.• “Pink”: Emphasizes Warm Skin Colors.• “Standard”: Standard Picture.• “Custom”: Customise Colors on the Screen.

NOTES• Changing the settings in the “Detail Control” menu (see next page)

will automatically set the My Color Control mode to “Custom”.• Pressing the ENTER button on the remote control for 3 seconds

when there is no OSD on the screen will display the My ColorControl menu.

Picture

Mode : Dynamic √

Size : 16:9 √

Digital NR : On √

DNIe : On √


Film Mode : Off √

Move Enter Return

Picture

Mode : Dynamic √

Size : 16:9 √

Digital NR : On √

DNIe : On √


Film Mode : Off √

Move Enter Return

My Color Control

Easy Control : Custom √

Detail Control √

Move Enter Return

œ √

Easy Control

Move ReturnEnter

Standard Custom

Original Custom

BP68-00586F-00Eng(060~073) 4/7/06 10:13 AM

English - 67

Custom Settings

1 Press the MENU button.Press the … or † button toselect “Picture”, then pressthe ENTER button.Press the … or † button toselect “My Color Control”,then press the ENTER button.

2 Press the … or † button toselect “Detail Control”, thenpress the ENTER button.

3 Press the … or † button toselect the desired My ColorControl, then press theENTER button.There are three colors:“Pink”, “Green” and “Blue”.

Press the œ or √ button toadjust the value of the colorselected.Changing the adjustmentvalue will refresh the adjusted screen.

Resetting the My Color Control Colors to the Factory DefaultsYou can return to the factory default settings for My Color Controlcolors.

4 Press the MENU button todisplay the “Detail Control”menu.Press the … or † button toselect “Reset”, then press theENTER button.The previously adjusted MyColor Control colors will bereset to the factory defaults.


Picture

Mode : Dynamic √

Size : 16:9 √

Digital NR : On √

DNIe : On √


Film Mode : Off √

Move Enter Return

My Color Control

Easy Control : Custom √

Detail Control √

Move Enter Return

Detail Control

Pink 50Green 50Blue 50Reset

Move Enter Return

Detail Control

Pink 50Green 50Blue 50Reset

Move Enter Return

Original Adjusted

Detail Control

Move ReturnAdjust

▲

Pink▼

50

BP68-00586F-00Eng(060~073) 3/30/06 7:14 PM

Picture Control

English - 68

Using the Color Weakness Enhancement FeatureThis feature adjusts the Red, Green or Blue color to enhance the picture according to the user’s particular color weakness.

1 Press the MENU button.Press the … or † button toselect “Setup”, then press the ENTER button.

2 Press the … or † button toselect “Color Weakness”,then press the ENTER button.

3 Press the ENTER button toselect “Color Weakness”.Press the … or † button toselect “On”, then press theENTER button.

4 Press the … or † button toselect a color to be adjusted,then press the ENTER button.

Press the œ or √ button toadjust the value of the colorselected.


0

Color Weakness

AdjustMove Return

▲

Red▼

Setup


Time √

Game Mode : Off √

V-Chip √

Caption √



Move Enter Return

Setup

Color Weakness √

PC √

Function Help : On √

Move Enter Return

Color Weakness

Color WeaknessRed 0GreenBlue 0

Move Enter Return

Color Weakness

Color Weakness : On √

Red 0Green 0Blue 0

Move Enter Return

• You can also select theseoptions (Red, Green orBlue) by pressing the …or † button.

† More

… More

OffOn

BP68-00586F-00Eng(060~073) 3/30/06 7:14 PM

English - 69

Setting the Film ModeYou can automatically sense and process film signals from all sources and adjust the picture for optimum quality.


2 Press the … or † button toselect “Film Mode”, thenpress the ENTER button.



NOTE• Film mode is supported in 480i only.

Picture

Mode : Dynamic √

Size : 16:9 √

Digital NR : On √

DNIe : On √


Film Mode : Off √

Move Enter Return

Picture

Mode : Dynamic √

Size : 16:9 √

Digital NR : On √

DNIe : On √


Film Mode : Off √

Move Enter Return

Picture

Mode : DynamicSize : 16:9Digital NR : OnDNIe : OnMy Color ControlFilm Mode : Off

Move Enter Return

OffOn

BP68-00586F-00Eng(060~073) 3/30/06 7:15 PM

Picture Control

English - 70

Freezing the Picture

Press the STILL button to freeze a moving picture. (Normal sound willstill be heard.)

To cancel this function, press the STILL button again or press anybutton on the remote control.

BP68-00586F-00Eng(060~073) 3/30/06 7:15 PM

English - 71

Setting the Blue Screen ModeIf no signal is being received or the signal is very weak, a blue screen automatically replaces thenoisy picture background. If you wish to continue viewing the poor picture, you must set the “BlueScreen” mode to “Off”.


2 Press the … or † button toselect “Blue Screen”, thenpress the ENTER button.



Setup


Time √

Game Mode : Off √

V-Chip √

Caption √



Move Enter Return

Setup


Time √

Game Mode : Off √

V-Chip √

Caption √



Move Enter Return

Setup


Move Enter Return

† More

† More

† MoreOffOn

BP68-00586F-00Eng(060~073) 3/30/06 7:15 PM

SAMSUNG

BP68-00586F-00Eng(060~073) 3/30/06 7:15 PM

Sound Control

BP68-00586F-00Eng(060~073) 3/30/06 7:15 PM

Sound Control

English - 74

Sound ControlYou can control and customize the sound levels and settings of the TV with the remote control.

Adjusting the VolumePress the VOL+ or VOL– button to increase or decrease the volume.

Using the MUTE ButtonAt any time, you can temporarilycut off the sound.Press the MUTE button on theremote control.The message “Mute” is displayedand the sound cuts off.

To turn mute off, press theMUTE button again or press eitherthe VOL+ or VOL– button.

Customizing the SoundThe sound settings can be adjusted to suit your personal preference.(Alternatively, you can use one of the automatic settings. See nextpage.)

1 Press the MENU button.Press the … or † button toselect “Sound”, then pressthe ENTER button.

2 Press the … or † button toselect “Equalizer”, then press the ENTER button.

Continued...

Mute

Sound

Mode : Custom √

Equalizer √

DNSe : Off √

Multi-Track Options √

Auto Volume : Off √

Internal Mute : Off √

Melody : On √

Reset

Move Enter Return

Sound

Mode : Custom √

Equalizer √

DNSe : Off √




Melody : On √

Reset

Move Enter Return

BP68-00586F-00Eng(074~083) 3/30/06 7:15 PM

English - 75

3 Press the œ or √ button to select aparticular item to be changed.Press the … or † button to increase ordecrease the selected frequency.


NOTES• If you make any changes to the equalizer settings, the sound mode is automatically switched

to the custom mode.• L/R Sound Balance Adjustment

To adjust the sound balance of the L/R speakers.• Bandwidth Adjustment (100Hz, 300Hz, 1KHz, 3KHz, 10KHz)

To adjust the level of different bandwidth frequencies.

Using Automatic Sound SettingsYour TV has automatic sound settings (“Standard”, “Music”, “Movie”, and “Speech”) that are presetat the factory. You can select “Custom”, which automatically recalls your personalized sound settings.

1 Press the MENU button. Press the … or † button to select“Sound”, then press the ENTER button.

2 Press the ENTER button to select “Mode”.Press the … or † button to select a particular item, then press the ENTER button.


Alternate methodPress the S.MODE button on the remotecontrol repeatedly to select one of thestandard sound settings.

NOTES• Choose Standard for the standard factory

settings.• Choose Music when watching music videos or concerts.• Choose Movie when watching movies.• Choose Speech when watching a show that is mostly dialog (i.e., news).• Choose Custom to recall your personalized settings (see “Customizing the Sound”, page 74).

Equalizer

Move Adjust Return

Balance 100Hz 300Hz 1KHz 3KHz 10KHz

R

L

+

0

-

Sound

Mode : Custom √

Equalizer √

DNSe : Off √




Melody : On √

Reset

Move Enter Return

Sound

Mode : CustomEqualizerDNSe : OffMulti-Track OptionsAuto Volume : OffInternal Mute : OffMelody : OnReset

Move Enter Return

Standard

MusicMovie

SpeechCustom

Standard

BP68-00586F-00Eng(074~083) 3/30/06 7:15 PM

Sound Control

English - 76

Auto VolumeEach broadcasting station has its own signal conditions, and it is inconvenient to adjust the volumeevery time the channel is changed. “Auto Volume” automatically adjusts the volume of the desiredchannel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.


2 Press the … or † button toselect “Auto Volume”, thenpress the ENTER button.



Sound

Mode : Custom √

Equalizer √

DNSe : Off √




Melody : On √

Reset

Move Enter Return

Sound

Mode : Custom √

Equalizer √

DNSe : Off √




Melody : On √

Reset

Move Enter Return

Sound


Move Enter Return

OffOn

BP68-00586F-00Eng(074~083) 3/30/06 7:15 PM

English - 77

Choosing a Multi-Channel Sound (MTS) trackThe digital-TV transmission system is capable of simultaneous transmission of many audio tracks (for example, simultaneous translations of the program into foreign languages).The availability of these additional “multitracks” depends upon the program.


2 Press the … or † button toselect “Multi-Track Options”,then press the ENTER button.

3 Press the ENTER button toselect “Preferred Language”.Press the … or † button tochoose the language(English, Spanish or French)you want, then press theENTER button.


Alternate methodPress the MTS button on the remote control. You can listen in a languageother than the favorite languageby pressing the MTS button.

NOTE• You can only select the language from among the actual

languages broadcast by the station. For example, if the current program is not broadcast in French,yet you select French as your Preferred language, you will hear the default language (e.g. English) determined by the broadcasting station.

Sound

Mode : Custom √

Equalizer √

DNSe : Off √




Melody : On √

Reset

Move Enter Return

Sound

Mode : Custom √

Equalizer √

DNSe : Off √




Melody : On √

Reset

Move Enter Return

Multi-Track Options

Preferred Language : EnglishMulti-Track Sound : Stereo

Move Enter Return

Digital

MTS : 1. English

EnglishEspañolFrançais

BP68-00586F-00Eng(074~083) 3/30/06 7:15 PM

Sound Control

English - 78

Choosing a Multi-Channel Sound (MTS) trackDepending on the particular program being broadcast, you can listen to Mono, Stereo or SAP.


2 Press the … or † button toselect “Multi-Track Options”,then press the ENTER button.

3 Press the … or † button toselect “Multi-Track Sound”,then press the ENTER button.Press the … or † button toselect a setting you want,then press the ENTER button.


Alternate methodPress the MTS button on theremote control repeatedly to selectan external signal source.

NOTES• Choose “Mono” for channels that are broadcasting in mono, or

if you are having difficulty receiving a stereo signal.• Choose “Stereo” for channels that are broadcasting in stereo.• Choose “SAP” to listen to the Separate Audio Program, which is

usually a foreign-language translation.

Sound

Mode : Custom √

Equalizer √

DNSe : Off √




Melody : On √

Reset

Move Enter Return

Sound

Mode : Custom √

Equalizer √

DNSe : Off √




Melody : On √

Reset

Move Enter Return

Multi-Track Options

Preferred Language : EnglishMulti-Track Sound : Stereo

Move Enter Return

MTS : Stereo

Analog

MonoStereoSAP

BP68-00586F-00Eng(074~083) 3/30/06 7:15 PM

English - 79

Selecting the Internal MuteWhen using a device such as a Home Theater or Amplifier with external speakers, you can setInternal Mute to On to cut off sound from the TV’s internal speakers.


2 Press the … or † button toselect “Internal Mute”, thenpress the ENTER button.

3 Press the … or † button toselect “On”, then press theENTER button.Pressing the … or † buttonwill alternate between “Off”and “On”.


NOTES• The VOL +, VOL - and MUTE buttons do not operate when the

Internal Mute is set to On.• When Internal Mute is set to “On”, Sound menus except

Multi-Track Options cannot be adjusted.

Sound

Mode : Custom √

Equalizer √

DNSe : Off √




Melody : On √

Reset

Move Enter Return

Sound

Mode : Custom √

Equalizer √

DNSe : Off √




Melody : On √

Reset

Move Enter Return

Sound


Move Enter Return

OffOn

BP68-00586F-00Eng(074~083) 3/30/06 7:15 PM

English - 80

Sound Control

Setting the On/Off MelodyA melody sound can be set to come on when the TV is powered on or off.


2 Press the … or † button toselect “Melody”, then pressthe ENTER button.Press the … or † button toselect “Off” or “On”, thenpress the ENTER button.


Sound

Mode : Custom √

Equalizer √

DNSe : Off √




Melody : On √

Reset

Move Enter Return

Sound


Move Enter Return

OffOn

BP68-00586F-00Eng(074~083) 3/30/06 7:15 PM

English - 81

Setting up DNSe (Digital Natural Sound engine)DNSe enhances the sound quality, automatically controls output, and prevents sound distortion.


2 Press the … or † button toselect “DNSe”, then pressthe ENTER button.

3 Press the … or † button toselect “On”, then press theENTER button.Pressing the … or † buttonwill alternate between “Off”and “On”.


Alternate methodPress the DNSe button on theremote control repeatedly to select“Off” or “On”.

Sound

Mode : Custom √

Equalizer √

DNSe : Off √




Melody : On √

Reset

Move Enter Return

Sound

Mode : Custom √

Equalizer √

DNSe : Off √




Melody : On √

Reset

Move Enter Return

Sound


Move Enter Return

OffOn

DNSe : On

BP68-00586F-00Eng(074~083) 3/30/06 7:15 PM

English - 82

Sound Control

Sound ResetIf Game Mode is On (Refer to page 86), the Reset Sound function is activated. Selecting the Resetfunction after setting the equalizer resets the equalizer to the factory defaults.


2 Press the … or † button toselect “Reset”, then pressthe ENTER button.


Sound

Mode : Custom √

Equalizer √

DNSe : Off √




Melody : On √

Reset

Move Enter Return

Sound


Move Enter Return

< If Game Mode is On >

BP68-00586F-00Eng(074~083) 3/30/06 7:15 PM

Special Features

BP68-00586F-00Eng(074~083) 3/30/06 7:15 PM


2 Press the … or † button toselect “Function Help”, thenpress the ENTER button.

3Press the … or † button toselect “Off” or “On”, thenpress the ENTER button.


NOTE• The function Help default setting is On.

Special Features

English - 84

Setting the Function HelpDisplays Help on the menu functions.

Switches the Function Help on.

Setup


Time √

Game Mode : Off √

V-Chip √

Caption √



Move Enter Return

† More

Setup

Color Weakness √

PC √


Move Enter Return

… More

Setup

Color WeaknessPCFunction Help : On

Move Enter Return

… More

OffOn

BP68-00586F-00Eng(084~103) 3/30/06 7:16 PM

English - 85

Menu Transparency LevelAdjusts the transparency of the menu screen.


2 Press the … or † button toselect “Menu Transparency”,then press the ENTER button.Press the … or † button toselect level, then press theENTER button.


Setup


Move Enter Return

Setup


Time √

Game Mode : Off √

V-Chip √

Caption √



Move Enter Return

† More

† More

HighMedium

LowOpaque

BP68-00586F-00Eng(084~103) 3/30/06 7:16 PM

Special Features

English - 86

Using Game ModeWhen connecting to a game console such as PlayStationTM or XboxTM, you can enjoy a more realistic gaming experience by selecting the game mode to on.

1 Press the MENU button.Press the … or † button toselect “Setup”, then pressthe ENTER button.

2 Press the … or † button toselect “Game Mode”, thenpress the ENTER button.



Restrictions on Game Mode (Caution)• To disconnect the game console and connect another external

device, set Game to Off in the setup menu.• If you display the TV menu in Game mode, the screen shakes slightly.

If Game Mode is On• Picture Mode is automatically changed to Custom and users

cannot change the mode.• Sound Mode in the Sound menu is deactivated. Adjust the

sound using the equalizer.• The Reset Sound function is activated. Selecting the Reset

function after setting the equalizer resets the equalizer to the factory defaults.

Setup


Time √

Game Mode : Off √

V-Chip √

Caption √



Move Enter Return

Setup


Move Enter Return

NOTES• Game Mode is available for all external input sources.• For component and HDMI input, game mode supports a resolution

of up to 720p.

Setup


Time √

Game Mode : Off √

V-Chip √

Caption √



Move Enter Return

† More

† More

† More

OffOn

BP68-00586F-00Eng(084~103) 3/30/06 7:16 PM

English - 87

Using the V-ChipAccess to channels and programs is controlled by a password (i.e., a 4-digit secret code that isdefined by the user). The on-screen menu will instruct you to assign a password (you can change itlater, if necessary).

How to Change Your Password

1 Press the MENU button.Press the … or † button toselect “Setup”, then pressthe ENTER button.Press the … or † button toselect “V-Chip”, then pressthe ENTER button.

2 Press the number buttons toenter your current 4-digitPIN. (The default PIN for anew TV set is “0000”.)“V-Chip” menu is displayed.

3 Press the … or † button toselect “Change PIN”, thenpress the ENTER button.

4 Press the number buttons toenter your new 4-digit PIN.Re-enter your new PIN to confirm.


V-Chip

Return

Enter PIN

*

Enter PIN

Change PIN

Enter new PIN.

Confirm new PIN.

NOTES• If you forget the PIN, press the remote control buttons in the

following sequence, which resets the PIN to 0-0-0-0: POWER (Off), MUTE, 8, 2, 4, POWER (On).

• The V-Chip function only works in TV, AV mode and S-Videomode.

V-Chip

V-Chip Lock : Off √

TV Parental Guidelines √

MPAA Rating √

Canadian English √

Canadian French √

Downloadable U.S. Rating √

Change PIN √

Move Enter Return

0 9

ReturnEnter PIN0 9

Setup


Time √

Game Mode : Off √

V-Chip √

Caption √



Move Enter Return

† More

BP68-00586F-00Eng(084~103) 3/30/06 7:16 PM

1 Press the MENU button.Press the … or † button toselect “Setup”, then press the ENTER button.Press the … or † button toselect “V-Chip”, then pressthe ENTER button.


3 “V-Chip” screen will appear.To enable the V-Chip feature,press the ENTER button sothat “V-Chip Lock” field is“On”. (Pressing the … or †button will alternate between“Off” and “On”.) Press the ENTER button.


Special Features

English - 88

How to Enable/Disable the Rating Controls

V-Chip

V-Chip Lock : OffTV Parental GuidelinesMPAA RatingCanadian EnglishCanadian FrenchDownloadable U.S. RatingChange PIN

Move Enter Return

V-Chip

Return

Enter PIN

*

Enter PIN0 9

Setup


Time √

Game Mode : Off √

V-Chip √

Caption √



Move Enter Return

† More

OffOn

BP68-00586F-00Eng(084~103) 3/30/06 7:16 PM

English - 89

How to Set up Restrictions Using “TV Parental Guidelines”

The parental restrictions can be set up using either of two methods: “TV Parental Guidelines” or“MPAA Rating”.



3 Press the … or † buttonto select “TV ParentalGuidelines”, then press theENTER button.

continued...

V-Chip

Return

Enter PIN

*

Enter PIN

V-Chip

V-Chip Lock : On √


MPAA Rating √


Canadian French √


Change PIN √

Move Enter Return

0 9

Setup


Time √

Game Mode : Off √

V-Chip √

Caption √



Move Enter Return

† More

BP68-00586F-00Eng(084~103) 3/30/06 7:16 PM

Special Features

English - 90

4 You can independently lock the TV ratings. The locked TV (FCC) ratings areindicated by the symbol “ ”. To unlock a locked channel, press theENTER button again.

Press the …/†/œ/√ buttons and theENTER button to activate the appropriaterestrictions for TV (FCC) rating system.

TV-Y : Young childrenTV-Y7 : Children 7 and overTV-G : General audienceTV-PG : Parent GuidanceTV-14 : Viewers 14 and overTV-MA : Mature Audience


NOTES• These categories consist of two separate groups: “TV-Y” and “TV-Y7” (young children

through age 7), and “TV-G” through “TV-MA” (everybody else).• The restrictions for these two groups work independently: If a household includes

very young children as well as young adults, the TV parental guidelines must be set up separately for each age group. (See page 92.)

TV Parental Guidelines

ALL FV V S L DTV-YTV-Y7

TV-GTV-PGTV-14TV-MA

Move Enter Return

Allow All

Block All

NOTES• Allow All : Press to unlock

all TV ratings.• Block All : Press to lock all

TV ratings.

BP68-00586F-00Eng(084~103) 3/30/06 7:16 PM

English - 91

How to Set up Restrictions Using “MPAA Rating”

The Movie rating system uses “MPAA” (Motion Picture Association of America) system, and its mainapplication is for movies.When the rating control is on, the TV will automatically block any programs that are coded withobjectionable ratings (either “MPAA Rating” or “TV Parental Guidelines”).

1 Press the MENU button.Press the … or † button toselect “Setup”, then press the ENTER button.Press the … or † button toselect “V-Chip”, then pressthe ENTER button.


3 Press the … or † button toselect “MPAA Rating”, thenpress the ENTER button.

4 You can independently lockthe movie ratings. The lockedmovie ratings are indicatedby the symbol “ ”.To unlock a locked channel,press the ENTER buttonagain.

Press the …/†/ENTER buttons to activate theappropriate restrictions formovie rating system.


MPAA Rating

Input

Picture

Sound

Channel

Setup

GuideMove Enter Return

BlockGPGPG-13RNC-17X

NR

Allow All

Block All

NOTES• Allow All : Press to unlock all movie ratings.• Block All : Press to lock all movie ratings.

V-Chip

Return

Enter PIN

*

Enter PIN

V-Chip



MPAA Rating √


Canadian French √


Change PIN √

Move Enter Return

0 9

Setup


Time √

Game Mode : Off √

V-Chip √

Caption √



Move Enter Return

† More

BP68-00586F-00Eng(084~103) 3/30/06 7:16 PM

Special Features

English - 92

Important Notes About Parental LocksExplanation of the MPAA and TV (FCC) Rating Systems:

TV (FCC) Age-Based Ratings

TV-MAMature audiences only. This program may contain mature themes, profane language,graphic violence and explicit sexual content.

TV-14Parents strongly cautioned. This program maycontain sophisticated themes, sexual content,strong language and more intense violence.

TV-PGParental guidance suggested. The programmay contain infrequent coarse language,limited violence, some suggestive sexual dialog and situations.

TV-GGeneral audience. It contains little or no violence, no strong language, and little or nosexual dialog or situations.

TV-Y7Directed to older children. Themes and elements in this program may include mildphysical or comedic violence, or may frightenchildren under the age of seven.

TV-YAll children. The themes and elements in thisprogram are specifically designed for a veryyoung audience, including children from agestwo – six.

TV (FCC) Content Category

V Violence.S Sexual content.L Offensive language.D Dialog sexual innuendo.FV Fantasy or cartoon violence.

MPAA Rating System (Movies)G General audience. No restriction.

PG Children under 13 should be accompaniedby an adult.

PG-13 Parental guidance suggested. Childrenunder 13 should be accompanied by anadult.

R Restricted. Viewers should be 17 or older.

NC-17 Not classified. Viewers should be 17 orolder.

X Adults only.

NR Not rated.

• TV (FCC) ratings : The particular rating that you have selected will be locked (and indicated as a red “L” on a blue background). Also, all of the age-based ratings will be locked within the particular group (i.e., “group 1” or “group 2”). Suppose that the TV-G rating and all of its contents (V, S, L, and D) are locked. In that case, more restrictive ratings (TV-PG, TV-14, and TV-MA) and all of their contents (V, S, L, and D) are automatically locked as well.

• MPAA ratings : The particular rating that you have selected will be locked. In addition, morerestrictive ratings will be locked as well.

• Neither TV (FCC) ratings nor MPAA ratings apply to news programs.

BP68-00586F-00Eng(084~103) 3/30/06 7:16 PM

English - 93

How to Set up Restrictions Using Canadian English


Press the … or † button toselect “V-Chip”, then pressthe ENTER button.


3 Press the … or † button toselect “Canadian English”,then press the ENTER button.

continued...

V-Chip

Return

Enter PIN

*

Enter PIN

V-Chip



MPAA Rating √


Canadian French √


Change PIN √

Move Enter Return

0 9

Setup


Time √

Game Mode : Off √

V-Chip √

Caption √



Move Enter Return

† More

BP68-00586F-00Eng(084~103) 3/30/06 7:16 PM

Special Features

English - 94

4 Press the … or † button to select aappropriate restriction.

Press the ENTER button to activate therestriction selected.“ ” symbol is indicated. To unlock a locked channel, press theENTER button again.


E Exempt programming includes...news, sports, documentaries and other information programming, talk shows, music videos, and variety programming.

C Programming intended for children under age 8.

C8+ Programming generally considered acceptable for children 8 years and over to watch on their own.

G General programming, suitable for all audiences.

PG Parental Guidance.

14+ Programming contains themes or content which may not be suitable for viewers under the age of 14.

18+ Adult programming.

Canadian English

Move Enter Return

Allow All

Block All

BlockE

CC8+GPG14+18+



TV ratings.

BP68-00586F-00Eng(084~103) 3/30/06 7:16 PM

English - 95

How to Set up Restrictions Using Canadian French


Press the … or † button toselect “V-Chip”, then pressthe ENTER button.


3 Press the … or † button toselect “Canadian French”,then press the ENTER button.

continued...

V-Chip

Return

Enter PIN

*

Enter PIN

V-Chip



MPAA Rating √


Canadian French √


Change PIN √

Move Enter Return

0 9

Setup


Time √

Game Mode : Off √

V-Chip √

Caption √



Move Enter Return

† More

BP68-00586F-00Eng(084~103) 3/30/06 7:16 PM

Special Features

English - 96

4 Press the … or † button to select aappropriate restriction.

Press the ENTER button to activate therestriction selected.“ ” symbol is indicated. To unlock a locked channel, press theENTER button again.


E Exempt programming includes...news, sports, documentaries and other information programming, talk shows, music videos, and variety programming.

G General.

8 ans+ Not recommended for young children.

13 ans+ Programming may not be suitable for children under theage of 13.

16 ans+ Programming is not suitable for children under the age of16.

18 ans+ Programming restricted to adults.

Canadian French

Move Enter Return

Allow All

Block All

BlockE

G8 ans+

13 ans+16 ans+18 ans+



TV ratings.

BP68-00586F-00Eng(084~103) 3/30/06 7:16 PM

English - 97

Using the V-Chip for Digital channelsParental restriction information can be used while watching DTV channels.



3 Press the … or † buttonto select “DownloadableU.S. Rating”, then press theENTER button.

NOTES• If information is not downloaded from the broadcasting station,

the Downloadable US -rating menu is deactivated.• Parental restriction information is automatically downloaded while

watching DTV channels. It may take several seconds.• The downloadable US rating menu is available for use after

information is downloaded from the broadcasting station.However, depending on the information from the broadcastingstation, it may not be available for use.

Continued...

V-Chip

Return

Enter PIN

*

Enter PIN

V-Chip



MPAA Rating √


Canadian French √


Change PIN √

Move Enter Return

0 9

Setup


Time √

Game Mode : Off √

V-Chip √

Caption √



Move Enter Return

† More

BP68-00586F-00Eng(084~103) 3/30/06 7:16 PM

Special Features

English - 98

4 You can independently lock the TV ratings. The locked TV ratings areindicated by the symbol “ ”. To unlock a locked channel, press theENTER button again.

Press the …/†/œ/√ buttons and theENTER button to activate the appropriaterestrictions for TV rating system.


NOTES• Allow all: Press to unlock all TV ratings. / Block all: Press to lock all TV ratings.• Parental restriction levels differ depending on the broadcasting station.• The default menu name and Downloadable US rating changes depending on the

downloaded information.• Even if you set the On-screen display to your desired language, the

"Downloadable U.S. Rating" menu will appear in English only.• The rating will automatically block certain categories that are more restrictive.• The rating titles (For example : Violence Level.etc) and TV ratings (For example :

NV, MV, V..etc) may differ depending on the broadcasting station.

Downloadable U.S. Rating

NVMVV

VVEV

Move Enter Return

Allow All

Violence Level

Block All

√ 1/2

Rating title

The number ofcurrent ratingtitle

The number ofall rating title

BP68-00586F-00Eng(084~103) 3/30/06 7:16 PM

English - 99

Viewing Closed Captions (On-Screen Text Messages)The Analog Caption function operates in either analog TV channel mode or external signal mode.(Depending on the broadcasting signal, the Analog Caption function may operate on digital channels.)


2 Press the … or † button toselect “Caption”, then pressthe ENTER button.

3 Press the ENTER button toselect “Caption”.

Press the … or † button toselect “On”, then press theENTER button.

continued...

Caption

Caption : OnCaption Mode : DefaultCaption Options

Move Enter Return

Analog

Setup


Time √

Game Mode : Off √

V-Chip √

Caption √



Move Enter Return

† More

Setup


Time √

Game Mode : Off √

V-Chip √

Caption √



Move Enter Return

† More

OffOn

BP68-00586F-00Eng(084~103) 3/30/06 7:16 PM

Special Features

English - 100

4 Press the … or † button to select“Caption Mode”, then press the ENTERbutton.Press the … or † button to select submenu(CC1~CC4 or Text1~Text4) you want,then press the ENTER button.


NOTES• The default is “CC1”.

CC1 : The Primary Synchronous Caption Service. These are captions in the primary language that must be in sync with the sound, preferably matched to a specific frame.

CC2 : The Special NonSynchronous Use Captions. This channel carries data that is intended to augment information carried in the program.

CC3 : Secondary Synchronous Caption Service. Alternate program-related caption data, typically second language captions.

CC4 : Special Non-Synchronous Use Captions. Similar to CC2.Text1 : First Text Service. This may be various non-program related data.Text2 : Second Text Service. Additional data, usually not program related.Text3/Text4 : Third and Fourth Text Services. These data channels are used

only if Text1 and Text2 data bandwidths not sufficient.• The Caption feature only works in TV, AV and S-Video mode.• The availability of captions depends on the program being broadcast.

Caption


Move Enter Return

DefaultCC1CC2CC3CC4Text1Text2

▼

BP68-00586F-00Eng(084~103) 3/30/06 7:16 PM

English - 101

Viewing Closed Captions (On-Screen Text Messages)The Digital Captions function operates on digital channels.


2 Press the … or † button toselect “Caption”, then pressthe ENTER button.

3 Press the ENTER button toselect “Caption”.

Press the … or † button toselect “On”, then press theENTER button.

4 Press the … or † button toselect “Caption Mode”, thenpress the ENTER button.Press the … or † button toselect submenu (Service 1~Service 6, CC1~CC4 orText1~Text4) you want, thenpress the ENTER button.

5 Press the … or † button toselect “Caption Options”,then press the ENTER button.

continued...

NOTE• “Caption Options” are

available only when“Service1~ Service6” canbe selected in “CaptionMode”.

Digital

Caption


Move Enter Return

Setup


Time √

Game Mode : Off √

V-Chip √

Caption √



Move Enter Return

† More

Setup


Time √

Game Mode : Off √

V-Chip √

Caption √



Move Enter Return

† More

Caption

Caption : On √

Caption Mode : Default √

Caption Options √

Move Enter Return

Caption


Move Enter Return

DefaultService 1Service 2 Service 3Service 4 Service 5 Service 6

▼

OffOn

BP68-00586F-00Eng(084~103) 3/30/06 7:16 PM

Special Features

English - 102

6 Press the … or † button to select “Size”,then press the ENTER button.Press the … or † button to select one youwant, then press the ENTER button.Set other listed options below using thesame method as above.Press the EXIT button to exit.

NOTE• The availability of captions depends on the program being broadcast.

Alternate methodPress the CAPTION button on the remotecontrol repeatedly to select “On” or “Off”.

SizeThis option consists of “Default”, “Small”, “Standard”, and “Large”.The default is “Standard”.

Font StyleThis option consists of “Default”, “Style0 ~ Style 7”. You can change the font you want. The default is “Style 0”.

Foreground ColorThis option consists of “Default”, “White”, “Black”, “Red”, “Green”,“Blue”, “Yellow”, “Magenta”, and “Cyan”. You can change the color of the letter. The default is “White”.

Background ColorThis option consists of “Default”, “White”, “Black”, “Red”, “Green”,“Blue”, “Yellow”, “Magenta”, and “Cyan”. You can change the background color of the caption. The default is “Black”.

Foreground OpacityThis option consists of “Default”, “Transparent”, “Translucent”, “Solid”, and “Flashing”. You can change the opacity of the letter.

Background OpacityThis option consists of “Default”, “Transparent”, “Translucent”, “Solid”, and “Flashing”. You can change the background opacity ofthe caption.

Return to DefaultThis option sets each of “Size”, “Font Style”, “Foreground Color”,“Background Color”, “Foreground Opacity”, and “BackgroundOpacity” Color to its default.

Caption : On

Caption

Size : Default √

Font Style : Default √

Foreground Color : Default √

Background Color : Default √

Foreground Opacity : Default √

Background Opacity : Default √

Return to Default

Move Enter Return

BP68-00586F-00Eng(084~103) 3/30/06 7:16 PM

PC Display

BP68-00586F-00Eng(084~103) 3/30/06 7:16 PM

PC Display

English - 104

Using Your TV as a Computer (PC) Display

How to Connect Your PC to the TVThis figure shows the Standard Connector-jack panel. The actual configuration on your TV may be different, depending on the model.

Connecting a PC (15p D-SUB) to the TV

1 Connect a PC cable betweenthe PC Output jack on the PC and the RGB input jack (PC IN) on the TV.

2 Connect a Audio cablebetween the Audio jack on the PC and the Audio input jack (PC AUDIO IN) on the TV.

NOTE• You cannot connect this TV to a

PC via HDMI/DVI.

15Pin (D-Sub)Cable

PC

Audio Cable

TV Rear Panel

1 2

BP68-00586F-00Eng(104~113) 3/30/06 7:18 PM

English - 105

Setting up Your PC Software (Based on Windows XP)

The Windows display-settings for a typical computer are shown below. But the actual screens on yourPC will probably be different, depending upon your particular version of Windows and your particularvideo card. But even if your actual screens look different, the same, basic set-up information will applyin almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)

1. Right click the mouse on the Windows Desktop, then click on Properties. The Display Dialog-Box will be displayed.

continued...

2 Click on Settings, then set the Display Mode withreference to the Display Modes Table. You do notneed to change the Colors settings.

3 Click on Advanced. A new settings dialog boxwill be displayed.

4 Click on the Monitor tab, then set the ScreenRefresh Rate with reference to the Display ModesTable. Set the Vertical Frequency and HorizontalFrequency individually if you can do so, instead of setting the Screen Refresh Rate.

5 Press the OK button, close the window, then press the OK button on the Display RegistrationInformation window. Automatic re-booting maycommence at this moment.

6 Shutdown the PC, and connect it to your TV.* The actual screens on your PC may look

different, depending on your particular version of Windows and the type of your PC.

* When you use your TV as a PC monitor, it supports Colors up to 32 bits.

* In this case, the display on the TV may look different depending on your particular version of Windows or the PC manufacturer.

* When connecting a PC, you must set it to the display settings that are supported by the TV. Otherwise, the message Out of input range will be displayed.

2

3

4

5

BP68-00586F-00Eng(104~113) 3/30/06 7:18 PM

PC Display

English - 106

NOTES• The PC text quality is optimum in XGA mode (1024 x 768@60Hz).• Both screen position and size will vary, depending on the type of PC monitor and its resolution.

The table above shows all of the display modes that are supported:* The interlace mode is not supported.* The TV will operate abnormally if a non-standard video format is selected.

• When this TV is used as a PC display, 32-bit color is supported (over 16 million colors).• Your PC display screen might appear different, depending on the manufacturer (and depending on

your particular version of Windows). Check your PC instruction book for information about connect-ing your PC to a TV display-monitor.

• Same modes as PC are supported for the signal input to the DVI jack. Only a separate sync signal is supported.

Resolution640 x 350720 x 400640 x 480

800 x 600

1024 x 768

640 x 480

720 x 400800 x 600

1024 x 768

1920 x 1080i1280 x 720p720 x 483p

Horizontal Frequency [KHz]31.4731.4731.4735.0037.8637.5035.1637.8848.0846.8748.3656.4060.02

35.00043.26937.92743.75057.67268.67733.7545.0031.47

Vertical Frequency [Hz]70.0070.0060.0066.7072.8075.0056.3060.3072.2075.0060.0070.1075.0070.00085.00885.03970.00072.00084.997

606060

Pixel Clock [MHz]25.17528.32225.17530.2431.5031.5036.0040.0050.0049.5065.0075.0078.7528.636.035.545.578.494.574.2574.25

27

Sync Polarity (H/V)+/--/--/+-/--/--/--+/-+/+-+/++/+-/--/-+/--/+-/-+/--/+-/++/+

XXX

ModeVGA

SVGA

XGA

VESA

DTV

Display Modes

BP68-00586F-00Eng(104~113) 3/30/06 7:18 PM

English - 107

Adjusting the Picture QualityThe purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is notremoved by fine tuning alone, then do the frequency adjustments to the utmost and fine tune again.After the noise has been reduced, re-adjust the picture so that it is aligned to the center of screen.

1 Press the SOURCE button to select “PC”.


3 Press the … or † button toselect “PC”, then press theENTER button.

4 Press the ENTER button toselect “Image Lock”, thenpress the ENTER button.

5 Press the … or † button toselect “Coarse” or “Fine”,then press the ENTER button.

6 Press the œ or √ button toremove the picture noise.

Press the EXIT button to exit.NOTE• This feature may change

the width of the image.If necessary, adjust theposition to center.

• You can also selectthese options (Coarse,or Fine) by pressing the… or † button.

Image Lock

Move Enter Return

Coarse 50Fine 0

50

Image Lock

AdjustMove Return

▲

Coarse▼

0

Image Lock

AdjustMove Return

▲

Fine▼

Setup


Time √

Game Mode : Off √

V-Chip √

Caption √



Move Enter Return

Setup

Color Weakness √

PC √


Move Enter Return

† More

… More

PC

Image Lock √

Position √

Auto AdjustmentImage ResetResolution : 1024x768 @75Hz

Move Enter Return

BP68-00586F-00Eng(104~113) 3/30/06 7:18 PM

PC Display

English - 108

Changing the Picture PositionAfter connecting the TV to your PC, adjust the position of picture if it is not well-aligned.




4 Press the … or † button toselect “Position”, then pressthe ENTER button.

5 Adjust the position of pictureby pressing the …/†/œ/√button.


Position

Input

Picture

Sound

Channel

Setup

ListingsMove Enter Return

▲

▼

▼

▼

Setup


Time √

Game Mode : Off √

V-Chip √

Caption √



Move Enter Return

Setup

Color Weakness √

PC √


Move Enter Return

† More

… More

PC

Image Lock √

Position √


Move Enter Return

BP68-00586F-00Eng(104~113) 3/30/06 7:18 PM




4 Press the … or † button toselect “Auto Adjustment”,then press the ENTER button.The picture quality andposition are automaticallyadjusted, and the picturereturns to original view a few seconds later.


English - 109

Adjusting the Picture Quality and Position AutomaticallyThis feature allows the TV to self-adjust to the incoming video signal. The values of fine, coarse andposition are adjusted automatically.

Setup


Time √

Game Mode : Off √

V-Chip √

Caption √



Move Enter Return

Setup

Color Weakness √

PC √


Move Enter Return

† More

… More

PC

Image Lock √

Position √


Move Enter Return

i Auto Adjustment in ProgressPlease Wait.

BP68-00586F-00Eng(104~113) 3/30/06 7:18 PM

PC Display

English - 110

Changing the Picture Size (PC Mode)You can select the picture size which best corresponds to your viewing requirements.


2 Press the MENU button.Press the … or † button toselect “Picture”, then pressthe ENTER button.Press the … or † button toselect “Size”, then press theENTER button.

3 Press the … or † button toselect the screen format youwant, then press the ENTERbutton.


NOTES• “Wide TV”: Scales the picture to the size of the TV screen,

regardless of the aspect ratio of the input source.• “Wide PC”: Scales the picture to 92% of the TV screen,

regardless of the aspect ratio of the input source. The picture position ( , ) and size ( ) adjustment are available bypressing the …/†/œ/√ button.

• “4:3”: Displays the picture as it is without changing the aspectratio of input source.

Alternate method

Press the P.SIZE button on theremote control repeatedly tochange the picture Size.

Mode : Dynamic √

Size : Wide PC √

Digital NR : On √

DNIe : Off √


Film Mode : Off √

Size

Move Enter Return

Wide TV

Wide PC

4:3

Move Enter Return

Picture

Wide PC…

†

BP68-00586F-00Eng(104~113) 4/21/06 4:41 PM

English - 111

Viewing the Current ResolutionYou can get the resolution information of your PC.




The resolution informationis displayed on the screen.


NOTE• To change the resolution, see pages 105~106.

Setup


Time √

Game Mode : Off √

V-Chip √

Caption √



Move Enter Return

Setup

Color Weakness √

PC √


Move Enter Return

† More

… More

PC

Image Lock √

Position √


Move Enter Return

BP68-00586F-00Eng(104~113) 3/30/06 7:18 PM

PC Display

English - 112

Initializing the Picture SettingsYou can replace all picture settings with the factory default values.




4 Press the … or † button toselect “Image Reset”, thenpress the ENTER button.The picture settings arereplaced with the factorydefault values.


Setup


Time √

Game Mode : Off √

V-Chip √

Caption √



Move Enter Return

Setup

Color Weakness √

PC √


Move Enter Return

† More

… More

PC

Image Lock √

Position √


Move Enter Return

i Image Reset is completed.

BP68-00586F-00Eng(104~113) 3/30/06 7:18 PM

Appendix

BP68-00586F-00Eng(104~113) 3/30/06 7:18 PM

Appendix

English - 114

Replacing the Lamp

• Why do I need to replace the lamp?The lamp used in a DLP TV has a limited lifespan. For the best screen quality it needs to be replaced periodically. After replacing the lamp, the screen quality will be bright and clear as new.

• When do I need to replace it?It should be replaced when the screen becomes darker, less clear or when all three LEDs on thefront (TIMER, LAMP, & STAND BY/TEMP) are flashing.

• Check before lamp replacement 1. The lamp must be the same code number and type. 2. The lamp type is indicated on the right side of the TV. It is also indicated on the lamp case. 3. After checking the code number for the lamp, give the code number to the store where you

purchased the TV or to a Samsung Service center.

• Caution1. Replace with the correct code numbered lamp to avoid damage to the TV. 2. Turn the power off and wait for 30 minutes before replacing the lamp as it will be hot. 3. Do not touch the glass part of the lamp with your bare hands or insert any foreign object inside

the cover as it may cause poor screen quality, electric shock or fire.4. Do not place the old lamp near flammable objects or within the reach of children. 5. Be sure to connect this TV directly to an AC wall outlet. If the TV’s AC plug is connected to a

cable box or other source, it will not allow for proper cool down time.

BP68-00586F-00Eng(114~119) 3/30/06 7:19 PM

English - 115

• For replacement, you will need a 5.91-Inch screwdriver and a pair of gloves.

1 Unplug TV, then use a screwdriver to remove the screws.

2 Remove the Lamp cover.

3 Remove the Lamp cover ductholding the locker and pullingit out.

4 Remove the screw securingthe Lamp by using ascrewdriver.

5 Separate the Lamp from theengine by holding the handleand pulling it out.

NOTES• Be sure the replacement Lamp is the same type.• After replacing the lamp, align the lamp cover with the groove and secure the screws.• The TV will not turn on if the lamp cover is not correctly closed (as this will activate the protective

circuit).

BP68-00586F-00Eng(114~119) 3/30/06 7:19 PM

Appendix

English - 116

Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of thesetroubleshooting tips apply, then call your nearest Samsung authorized service center.

Possible SolutionTry another channel. Adjust the antenna.Check all wire connections.

Try another channel. Adjust the antenna.Make sure the MUTE button is off.

Try another channel. Press the SOURCE button.Make sure the TV is plugged in.Check the antenna connections.Check that the Mute feature is off.

Make sure the program is broadcasted in color.Adjust the picture settings.

Adjust the antenna. Check all wire connections.If you are using a VCR, check the tracking.

Unplug the TV for 30 seconds, then try operating itagain.

Press the “TV” button to put your remote control into “TV” mode. Make sure the remote has batteries.

Make sure the wall outlet is working. Make sure the TV is plugged in. Make sure the remote has batteries.

Please check the digital signal strength and inputantenna.

The visual qualities of digital channels may varydepending on the original production method (analogor digital). ➔ If the original production method is digital: High

visual quality program.➔ If the original production method is analog: The

digital program displayed on the screen is originally an analog program which has been converted. The visual quality is of an SD grade.

The HD caption that appears when switching channelsor when pressing the Information button on the remotecontrol means the selected channel is simply a digitalchannel. If the broadcasting station converts an analog signal into digital and transmits the signal, the visual quality may not be perfect.(Applied to Set Top Box built-in model only.)

ProblemPoor picture quality.

Poor sound quality.

No picture or sound.

No color, wrong colors or tints.

Picture rolls vertically.

The TV operates erratically.

Your remote control does not operate your TV.

The TV won’t switch on.

Digital broadcasting screen problem.

The visual qualities of digital channels vary.

Although the TV caption shows HD,the visual quality is not satisfactory.

• The display panel used for the DLP TV is composed of many tiny pixels.These pixels may occasionally appear on the screen.

BP68-00586F-00Eng(114~119) 3/30/06 7:19 PM

English - 117

Cleaning and Maintaining Your TVPlease follow these guidelines to get the maximum performance from your TV.

Placement• Do not put the TV near extremely hot, cold, humid or dusty places.• Do not place the TV near appliances with electric motors that create magnetic fields, such as

vacuum cleaners.• Keep the ventilation openings clear; do not place the TV on a soft surface, such as cloth or

paper.• Place the TV in a vertical position only.

Liquids• Do not handle liquids near or on the TV. Liquids that spill into it can cause serious damage.

Cabinet• Never open the cabinet or touch the parts inside.• Wipe your TV with a clean, dry cloth. Never use water, cleaning fluids, wax, or chemicals.• Do not put heavy objects on top of the cabinet.• This DLP TV projects the image onto a large screen by applying an optical system.

If you place the TV set face down, it might cause a problem because dirt, or some other contaminant may become attached to the inside of the TV set.

Temperature• If your TV is suddenly moved from a cold to a warm place, unplug the power cord, and allow

at least two hours for moisture that may have formed inside the unit to dry completely.

Using Your TV in Another CountryIf you plan to take your TV with you to a foreign country, please be aware of the different television systems that are in use around the world. A TV designed for one system may not workproperly with another system due to differences in the TV channel frequencies.

Specifications

Model

Voltage

Frequency of Operation

Power Consumption

Dimensions(W x D x H)

Weight

HL-S4265W

AC 110-120V

60Hz

200 watts

39.33 x 13.03 x 29.74 inches999 x 331 x 755.5 mm

25.5 Kg / 56.2 lbs

HL-S5065W

AC 110-120V

60Hz

200 watts

46.54 x 14.00 x 34.25 inches1182 x 355.5 x 870 mm

30.5 Kg / 67.2 lbs

HL-S5665W

AC 110-120V

60Hz

200 watts

52.36 x 15.26 x 37.87 inches1330 x 387.5 x 962 mm

34.2 Kg / 75.4 lbs

HL-S6165W

AC 110-120V

60Hz

200 watts

56.93 x 18.37 x 41.59 inches1446 x 466.5 x 1056.5 mm

40.4 Kg / 89.1 lbs

HL-S6765W

AC 110-120V

60Hz

200 watts

62.36 x 19.78 x 45.06 inches1584 x 502.5 x 1144.5 mm

47.3 Kg / 104.3 lbs

HL-S5055W

AC 110-120V

60Hz

200 watts

46.54 x 14.76 x 34.25 inches1182 x 375 x 870 mm

29.8 Kg / 65.7 lbs

BP68-00586F-00Eng(114~119) 4/3/06 3:07 PM

This page is intentionallyleft blank.

BP68-00586F-00Eng(114~119) 3/30/06 7:19 PM

BP68-00586F-00

Contact SAMSUNG WORLD-WIDEIf you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.

Country

CANADA

U.S.A

Customer Care Center �

1-800-SAMSUNG (7267864)

1-800-SAMSUNG (7267864)

Web Site

www.samsung.com/ca

www.samsung.com

AddressSamsung Electronics Canada Inc., Customer Service55 Standish Court Mississauga, Ontario L5R 4B2CanadaSamsung Electronique Canada Inc., Service à la Clientèle55 Standish Court Mississauga, Ontario L5R 4B2CanadaSamsung Electronics America, Inc.105 Challenger RoadRidgefield Park, NJ 07660-0511

BP68-00586F-00Eng(cover) 3/30/06 7:07 PM Page 2

Samsung DLP TV HL Series Manual

Documents

Transcript of Samsung DLP TV HL Series Manual