Sanitary Sample ValvesMade in the USA

Designed and manufactured to a higher standard of quality.

Why choose our sanitary sampling valves? • 316L SS construction machined to less than 20 Ra. • Pressure Rating: 300 PSI at 200˚F. • Optional 45˚, 90˚ or Inline models with 1/2”, 3/4”, 1”, 1 1/2” and 2” Ferrule, 1/4” and 1/2” NPT or weld body. • Aseptic process connection utilizing a zero dead leg and a Teflon port seal” on inside front cover. • 45 and 90 degree valves with sampling stems can be configured to point the mitered end into the flow of the product. Stems continually flush with a hole at the base oppo- site the miter to provide a clean sample at any time. 1 1/8” stems are intended for up to 1 1/2” OD tube runs and 2” for 2” OD and larger. • Complete cleaning is obtained inside of a stainless steel sanitizing wash cham- ber. Cleaner and sanitizer are circulated via spray arms as well as through individual injectors directly inside of valve sub-assemblies. After cleaning parts are rinsed with deionized water and dried via HEPA filtration. • 3/8” Diameter Hose Barb product discharge. • Minimized dead space for possible contamination. • Limited stem travel for safety. • Solid Delrin® knob standard with 17-4 SS knob optional. • Spare Parts and Repair/Maintenance Kits are available. SV&E valves are easily unassembled to be cleaned or maintained. • Autoclavable assembled or unassembled. • All valves are individually packaged and labeled. • Certificate of Compliance and Material Certs are provided with each order. • Electropolishing is available upon request.

Part Numbering TableStyle Connection Sampling

StemO-Ring Knob Flow

DirectionIL: Inline F: 1/2” – 3/4”

FerruleNone: No Sampling Stem

None: Standard Red Silicone

None: Stan-dard Delrin® Knob

-UP: Up

90: 90 Degree F1: 1” – 1.5”Ferrule

1.13EXT: 1 1/8” Sam-pling Stem

-US: USP Class VI Clear Silicone

-SK: Stainless Knob

-DN: Down

45: 45 Degree F2: 2” Ferrule 2EXT: 2” Sampling Stem

-V: Viton® -RL: Right to Left

N: 1/4” NPT -E: EPDM -LR: Left to Right

1/2N: 1/2” NPT

-K Kalrez® 6375

W: Weld

TABLE OF CONTENTS

Valve Cleanroom/Assembly 4Valve Packaging/Laser 5Valve Pro�lometer/Sanitizer 6OFSVILF: In-Line 1/2" – 3/4" Ferrule 7OFSVILF-1.13EXT: In-Line 1/2" – 3/4" Ferrule with 1-1/8” Stem 7OFSVILF-2EXT: In-Line 1/2" – 3/4" Ferrule with 2” Stem 8OFSV90F: 90 Degree 1/2" – 3/4" Ferrule 8OFSV45F: 45 Degree 1/2" – 3/4" Ferrule 9OFSV180F: 180 Degree 1/2" – 3/4" Ferrule 9OFSV90F-1.13EXT-DN: 90 Degree 1/2" – 3/4" Ferrule with 1-1/8” Stem – Downward Flow 10OFSV90F-1.13EXT-UP: 90 Degree 1/2" – 3/4" Ferrule with 1-1/8” Stem – Upward Flow 10OFSV90F-1.13EXT-RL: 90 Degree 1/2" – 3/4" Ferrule with 1-1/8” Stem – Right to Left Flow 11OFSV90F-1.13EXT-LR: 90 Degree 1/2" – 3/4" Ferrule with 1-1/8” Stem – Left to Right Flow 11OFSV90F-2EXT-DN: 90 Degree 1/2” – 3/4" Ferrule with 2" Stem – Downward Flow 12OFSV90F-2EXT-UP: 90 Degree 1/2” – 3/4" Ferrule with 2" Stem – Upward Flow 12OFSV90F-2EXT-RL: 90 Degree 1/2” – 3/4" Ferrule with 2" Stem – Right to Left Flow 13OFSV90F-2EXT-LR: 90 Degree 1/2” – 3/4" Ferrule with 2" Stem – Left to Right Flow 13OFSVILF-1: In-Line 1” – 1-1/2” Ferrule 14OFSVILF-1-2EXT: In-Line 1” – 1-1/2” Ferrule with 2” Stem 14OFSV90F-1: 90 Degree 1” – 1-1/2” Ferrule 15OFSV45F-1: 45 Degree 1” – 1-1/2” Ferrule 15OFSV90F-1-2EXT-DN: 90 Degree 1” – 1-1/2” Ferrule with 2” Stem – Downward Flow 16OFSV90F-1-2EXT-UP: 90 Degree 1” – 1-1/2” Ferrule with 2” Stem – Upward Flow 16OFSV90F-1-2EXT-RL: 90 Degree 1” – 1-1/2” Ferrule with 2” Stem – Right to Left Flow 17OFSV90F-1-2EXT-LR: 90 Degree 1” – 1-1/2” Ferrule with 2” Stem – Left to Right Flow 17OFSVILF-2: In-Line 2” Ferrule 18OFSVILF-2-2EXT: In-Line 2” Ferrule with 2” Stem 18OFSV90F-2: 90 Degree 2” Ferrule 19OFSV45F-2: 45 Degree 2” Ferrule 19OFSVILN: In-Line 1/4” NPT 20OFSVILN-1.13EXT: In-Line 1/4” NPT with 1-1/8” Stem 20OFSVILN-2EXT: In-Line 1/4” NPT with 2” Stem 21OFSV90N: 90 Degree 1/4” NPT 21OFSV45N: 45 Degree 1/4” NPT 22OFSVIL1/2N: In-Line 1/2“ NPT 22OFSVILW: In-Line Weld 23OFSVILW-1.13EXT: In-Line Weld with 1-1/8“ Stem 23OFSVILW-2EXT: In-Line Weld with 2” Stem 24OFSV90W: 90 Degree Weld 24OFSV45W: 45 Degree Weld 25OFSV45PR: 45 Degree Perlick Replacement Body 25OFSVSPL1.5F: 1-1/2“ Ferrule Spool with Welded Valve 26OFSV90FFV: 90 Degree 1/2” Ferrule with Side Flushing Valve 26OFSV45F-1.13EXT-RL: 45 Degree 1/2" – 3/4" Ferrule with 1-1/8” Stem – Right to Left Flow 27OFSVIL1/2N-1.13EXT: Inline 1/2” NPT 1 1/8” Sampling Stem 27OFSV901/2N-1.13EXT-LR: 90 Degree 1/2” NPT 1 1/8” Sampling Stem – Left to Right Flow 28OFSV451/2N: 45 Degree 1/2“ NPT 28OFSV45F-2EXT-RL: 45 Degree 1/2" – 3/4" Ferrule with 2” Stem – Right to Left Flow 29OFSV451/2N-1.13EXT-LR: 45 Degree 1/2” NPT 1 1/8” Sampling Stem – Left to Right Flow 29OFSVILF-SSK: In-Line 1/2" – 3/4" Ferrule with Stainless Steel Knob 30

VALVE ASSEMBLY

VALVE CLEANROOM

4

VALVE PACKAGING

5

VALVE LASER

6

VALVE PROFILOMETERSurface Finish Veri�cation

WASHER/SANITIZER

7

DESCRIPTION:In-Line 1/2” – 3/4” Ferrule

PART NUMBER:OFSVILF

DESCRIPTION:In-Line 1/2” – 3/4” Ferrule with

1-1/8” Stem

PART NUMBER:OFSVILF-1.13EXT

8

DESCRIPTION:In-Line 1/2” – 3/4” Ferrule with

2” Stem

PART NUMBER:OFSVILF-2EXT

DESCRIPTION:90 Degree 1/2” – 3/4” Ferrule

PART NUMBER:OFSV90F

9

DESCRIPTION:45 Degree 1/2” – 3/4” Ferrule

PART NUMBER:OFSV45F

DESCRIPTION:180 Degree 1/2” – 3/4” Ferrule

PART NUMBER:OFSV180F

10

PART NUMBER:OFSV90F-1.13EXT-DN

DESCRIPTION:90 Degree 1/2” – 3/4” Ferrule with

1-1/8” Stem – Downward Flow

DESCRIPTION:90 Degree 1/2” – 3/4” Ferrule with

1-1/8” Stem – Upward Flow

PART NUMBER:OFSV90F-1.13EXT-UP

11

DESCRIPTION:90 Degree 1/2” – 3/4” Ferrule with

1-1/8” Stem – Right to Left Flow

PART NUMBER:OFSV90F-1.13EXT-RL

PART NUMBER:OFSV90F-1.13EXT-LR

DESCRIPTION:90 Degree 1/2” – 3/4” Ferrule with

1-1/8” Stem – Left to Right Flow

12

DESCRIPTION:90 Degree 1/2” – 3/4” Ferrule with

2” Stem – Downward Flow

PART NUMBER:OFSV90F-2EXT-DN

DESCRIPTION:90 Degree 1/2” – 3/4” Ferrule with

2” Stem – Upward Flow

PART NUMBER:OFSV90F-2EXT-UP

13

DESCRIPTION:90 Degree 1/2” – 3/4” Ferrule with

2” Stem – Right to Left Flow

PART NUMBER:OFSV90F-2EXT-RL

DESCRIPTION:90 Degree 1/2” – 3/4” Ferrule with

2” Stem – Left to Right Flow

PART NUMBER:OFSV90F-2EXT-LR

14

DESCRIPTION:In-Line 1” – 1-1/2” Ferrule

PART NUMBER:OFSVILF-1

DESCRIPTION:In-Line 1” – 1-1/2” Ferrule with

2” Stem

PART NUMBER:OFSVILF-1-2EXT

15

DESCRIPTION:90 Degree 1” – 1-1/2” Ferrule

PART NUMBER:OFSV90F-1

DESCRIPTION:45 Degree 1” – 1-1/2” Ferrule

PART NUMBER:OFSV45F-1

16

DESCRIPTION:90 Degree 1” – 1-1/2” Ferrule with

2” Stem – Downward Flow

PART NUMBER:OFSV90F-1-2EXT-DN

DESCRIPTION:90 Degree 1” – 1-1/2” Ferrule with

2” Stem – Upward Flow

PART NUMBER:OFSV90F-1-2EXT-UP

17

DESCRIPTION:90 Degree 1” – 1-1/2” Ferrule with

2” Stem – Right to Left Flow

PART NUMBER:OFSV90F-1-2EXT-RL

DESCRIPTION:90 Degree 1” – 1-1/2” Ferrule with

2” Stem – Left to Right Flow

PART NUMBER:OFSV90F-1-2EXT-LR

18

DESCRIPTION:In-Line 2” Ferrule

PART NUMBER:OFSVILF-2

DESCRIPTION:In-Line 2” Ferrule with 2” Stem

PART NUMBER:OFSVILF-2-2EXT

19

DESCRIPTION:90 Degree 2” Ferrule

PART NUMBER:OFSV90F-2

DESCRIPTION:45 Degree 2” Ferrule

PART NUMBER:OFSV45F-2:

20

DESCRIPTION:In-Line 1/4” NPT

PART NUMBER:OFSVILN

DESCRIPTION:In-Line 1/4” NPT with 1-1/8” Stem

PART NUMBER:OFSVILN-1.13EXT

21

DESCRIPTION:In-Line 1/4” NPT with 2” Stem

PART NUMBER:OFSVILN-2EXT

DESCRIPTION:90 Degree 1/4” NPT

PART NUMBER:OFSV90N

22

DESCRIPTION:45 Degree 1/4” NPT

PART NUMBER:OFSV45N

DESCRIPTION:In-Line 1/2“ NPT

PART NUMBER:OFSVIL1/2N

23

PART NUMBER:OFSVILW-1.13EXT

DESCRIPTION: In-Line Weld with 1-1/8“ Stem

DESCRIPTION:In-Line Weld

PART NUMBER:OFSVILW

24

DESCRIPTION:90 Degree Weld

PART NUMBER:OFSV90W

DESCRIPTION:In-Line Weld with 2” Stem

PART NUMBER:OFSVILW-2EXT

DESCRIPTION:45 Degree Weld

PART NUMBER:OFSV45W

25

PART NUMBER:OFSV45PR

DESCRIPTION:45 Degree Perlick Replacement Body

DESCRIPTION:90 Degree 1/2” Ferrule

with Side Flushing Valve

PART NUMBER:OFSV90FFV

26

DESCRIPTION:1-1/2“ Ferrule Spool with

Welded Valve

PART NUMBER:OFSVSPL1.5F

27

DESCRIPTION:45 Degree 1/2” – 3/4” Ferrule with

1-1/8” Stem – Right to Left Flow*Optional Flow Directions Available

PART NUMBER:OFSV45F-1.13EXT-RL

DESCRIPTION:In-line 1/2” NPT 1 1/8”

Sampling Stem

PART NUMBER:OFSVIL1/2N-1.13EXT

28

DESCRIPTION:45 Degree 1/2“ NPT

PART NUMBER:OFSV451/2N

DESCRIPTION:90 Degree 1/2” NPT 1 1/8” Sampling

Stem Left to Right Flow*Optional Flow Directions Available

PART NUMBER:OFSV901/2N-1.13EXT-LR

29

DESCRIPTION:45 Degree 1/2” NPT 1 1/8” Sampling

Stem Left to Right Flow*Optional Flow Directions Available

PART NUMBER:OFSV451/2N-1.13EXT-LR

DESCRIPTION:45 Degree 1/2” – 3/4” Ferrule with

2” Stem – Right to Left Flow*Optional Flow Directions Available

PART NUMBER:OFSV45F-2EXT-RL

30

DESCRIPTION:In-Line 1/2” – 3/4” Ferrule with

Stainless Steel Knob*Stainless Steel Knob Available

For All Models

PART NUMBER:OFSVILF-SSK

31

Sample Valves &

Equipment

3725 Interpark Drive

Colorado Springs, CO 80907