Sample Data Sheet
3
BTI 7000 Series: Dual 10G Multiprotocol Transponder The Dual 10G Multiprotocol Transponder (10G DTPR) is a flexible service-extension module designed for use with a variety of protocols. It provides dedicated WAN connectivity and support for 10G protocols used in today’s service-provider and enterprise networks. The 10G DTPR’s dual transponder— two transponders-in-one—architecture offers high-density extension of two independent client services or resilient protection of a single client service, and can be leveraged as a WAN service on-ramp or regenerator module in reach-extension applications. It is available in two versions: the 10G DTPR and the 10G DTPR Lite, whose differences are explained below. 10G DTPR Overview The 10G DTPR has two multiprotocol Small Form Factor Pluggable (XFP) client ports used for interfacing to subtending equipment. Client ports are software programmable to address a protocol mix of 10 Gigabit Ethernet (10GbE) WAN/LAN PHY, G.709 OTN OTU-2, 10G Fibre Channel, and SONET (OC-192) / SDH (STM-64). Two XFP-based line ports utilize transparent line mapping (OTU2 G.709 digital wrapper) and facilitate WAN networking for extension of client services. Line and client ports support 850nm, 1310nm, 1550nm, CWDM, and DWDM XFP optics to provide support for various network configurations and to simplify sparing. The 10G DTPR can be configured in one of three ways: for unprotected dual line, for 1+1 facility, or as a regenerator for services emanating from other BTI Systems client service modules such as transponders, muxponders, or packetVX. Protocol Support Client Line Client Line Mapping Strategy 10GbE LAN PHY • • • • Semi-Transparent OTU-2 (10.709) 10GbE WAN PHY • • • • Transparent (OTU-2)/Section Regen G.709 OTN OTU-2 • • • • Transparent SONET OC-192 • • • • Transparent (OTU-2)/Section Regen SDH STM-64 • • • • Transparent (OTU-2)/Section Regen 10G Fibre Channel • • • • Transparent Features G.709 OTU-2 OTN Line Mapping By mapping client signals to the G.709 OTN OTU-2 protocol, the 10G DTPR makes use of an embedded management channel (GCC) for remote provisioning and enhanced forward error correction (FEC) for superior signal quality, and enjoys simplified interworking with foreign networks. Multiprotocol Support Client ports are software programmable to address a protocol mix of 10 Gigabit Ethernet (10GbE) WAN/LAN PHY, G.709 OTN OTU-2, 10G Fibre Channel, and SONET (OC-192) / SDH (STM-64). Flexible Configuration Options and XFP Versatility The 10G DTPR can be configured to carry two unprotected signals or one 1+1 facility protected signal, or to regenerate signals as a complement to the BTI Systems reach-extension portfolio offerings. Line and client ports support 850nm, 1310nm, 1550nm, CWDM, and DWDM XFP optics to provide support for various network configurations and simplified sparing. the network you need. BTI 7000 Series Dual 10G Multiprotocol Transponder Client Service Module Data Sheet
-
Upload
andrew-goldenberg -
Category
Documents
-
view
219 -
download
1
description
A data sheet put together by ASAP Print Management.
Transcript of Sample Data Sheet
BTI 7000 Series:
Dual 10G Multiprotocol TransponderThe Dual 10G Multiprotocol Transponder (10G DTPR) is a flexible service-extension module designed for use with a variety of protocols. It providesdedicated WAN connectivity and support for 10G protocols used in today’s service-provider and enterprise networks. The 10G DTPR’s dual transponder—two transponders-in-one—architecture offers high-density extension of two independent client services or resilient protection of a single client service,and can be leveraged as a WAN service on-ramp or regenerator module in reach-extension applications. It is available in two versions: the 10G DTPR andthe 10G DTPR Lite, whose differences are explained below.
10G DTPR OverviewThe 10G DTPR has two multiprotocol Small Form Factor Pluggable (XFP) client ports used for interfacing to subtending equipment. Client ports aresoftware programmable to address a protocol mix of 10 Gigabit Ethernet (10GbE) WAN/LAN PHY, G.709 OTN OTU-2, 10G Fibre Channel, and SONET(OC-192) / SDH (STM-64). Two XFP-based line ports utilize transparent line mapping (OTU2 G.709 digital wrapper) and facilitate WAN networking forextension of client services. Line and client ports support 850nm, 1310nm, 1550nm, CWDM, and DWDM XFP optics to provide support for variousnetwork configurations and to simplify sparing. The 10G DTPR can be configured in one of three ways: for unprotected dual line, for 1+1 facility, or as aregenerator for services emanating from other BTI Systems client service modules such as transponders, muxponders, or packetVX.
Protocol Support Client Line Client Line Mapping Strategy10GbE LAN PHY • • • • Semi-Transparent OTU-2 (10.709)
10GbE WAN PHY • • • • Transparent (OTU-2)/Section Regen
G.709 OTN OTU-2 • • • • Transparent
SONET OC-192 • • • • Transparent (OTU-2)/Section Regen
SDH STM-64 • • • • Transparent (OTU-2)/Section Regen
10G Fibre Channel • • • • Transparent
Features
G.709 OTU-2 OTN Line Mapping
By mapping client signals to the G.709 OTN OTU-2 protocol, the 10G DTPR makes use of an embedded management channel (GCC) for remoteprovisioning and enhanced forward error correction (FEC) for superior signal quality, and enjoys simplified interworking with foreign networks.
Multiprotocol Support
Client ports are software programmable to address a protocol mix of 10 Gigabit Ethernet (10GbE) WAN/LAN PHY, G.709 OTN OTU-2, 10G Fibre Channel,and SONET (OC-192) / SDH (STM-64).
Flexible Configuration Options and XFP Versatility
The 10G DTPR can be configured to carry two unprotected signals or one 1+1 facility protected signal, or to regenerate signals as a complement to theBTI Systems reach-extension portfolio offerings. Line and client ports support 850nm, 1310nm, 1550nm, CWDM, and DWDM XFP optics to providesupport for various network configurations and simplified sparing.
the network you need.
BTI 7000 Series Dual 10G Multiprotocol TransponderClient Service Module Data Sheet
Service Oriented Performance Monitoring
Physical layer, SONET/SDH, Ethernet, and G.709 OTN (OTU2) performance metrics are available. This allows for efficient network monitoring andenhanced Operations, Administration, and Maintenance (OAM) capabilities, and assurance of Service Level Agreements (SLAs) at all layers of thenetwork.
Automatic Protection Switching Based on Fault Detection
Rather than relying simply on loss of signal metrics for determining protection switches, the 10G DTPR constantly monitors signal quality to ensure thatprotection switches occur when faults occur or signal levels degrade.
Numerous Regeneration Options
The 10G DTPR can perform one or more of the following regeneration options: 2R (translation to assign the client signal to a proper WDM wavelength),3R (regeneration to extend the reach of the signal by performing an Optical-Electrical-Optical [O-E-O] regeneration) and 4R (reframe to modifyoverhead framing bytes of a signal).
Configuration Options
the network you need.
BTI 7000 Series Dual 10G Multiprotocol TransponderClient Service Module Data Sheet
Technical Specifications10G DTPR 10G DTPR Lite
Client Interface Ports 2 XFP 2 XFP
Client Protocols
10GbE LAN PHY 10.5 Gbps • •
10GbE WAN PHY 10 Gbps • •
G.709 OTN OTU-2 10.7 Gbps •
OC-192/SDH STM-64 10 Gbps • •
10G Fibre Channel 10 Gbps • •
Line Interface Ports 2 XFP 2 XFP
Line Rates 10 Gbps • •
Wavelengths Supported 850 nm/1310 nm/1550 nm • •
CWDM 8 λ 8 λ
DWDM 40 λ 40 λ
Line-Side Protection Unprotected (Dual Line) • •
Protected • •
Protection LOS • •
LO Synch •
Signal Degrade •
Reach Extension G.975 FEC •
Enhanced FEC •
In-band Management G.709 OTN GCC •
Transmission Testing Client- and Line-Side Loopbacks • •
Performance Monitoring Physical Layer, SONET/SDH,Ethernet, and G.709 OTN (OTU2)
Physical Layer
Loopback Facility Loopback • •
FPSD (Ethernet) • •
XFP Support 850 nm XFP/1310 nm XFP/1550 nm XFP • •
CWDM XFP • •
DWDM XFP • •
Storage Extension Certification Brocade Data Center Ready •
Environmental -5ºC to 55ºC • •
-20ºC to 65ºC • •
Module Variants BT7A49AA BT7A49AC
Module Dimensions Single (1W x 1H)Slots: 1 - 61
Single (1W x 1H)Slots: 1 - 62
Supported Platforms BTI 7060BTI 7030
BTI 7060BTI 7030
References* Slot 5 in BTI 7060 Expansion Shelf Only
** Slot 5 in BTI 7060 Expansion Shelf Only
Information in this document is subject to change without notice.BTI Systems, the BTI corporate logo, NETSTENDER, microWDM, packetVX, and proNX are trademarks of BTI Systems Inc. © 2009 BTI Systems Inc. All rights Reserved.For more information please contact us at [email protected] or call +1 613. 248. 9154 or +1 866. 626. 9154, (toll free in North America).
BTI 7000 Series Dual 10G Multiprotocol TransponderClient Service Module Data Sheet
