Salient characteristics / ApprovalsSalient characteristics / Approvals Non-illuminated SwitchesNon-illuminated Switches Illuminated SwitchesIlluminated Switches Pilot LightsPilot Lights Contact ElementsContact Elements

Control & Signalling Devices Control & Signalling Devices 22.5 Metal Series22.5 Metal Series

Salient characteristics / ApprovalsSalient characteristics / Approvals Economy of Space Aesthetically elegant Simple to fix Fixing method unaffected by excessive vibration Fixing method such that actuators are interchangeable Fixing distance 30mm x 40mm

Conforming StandardsConforming Standards ApprovalsApprovals

Degree of ProtectionDegree of Protection Ambient TemperatureAmbient Temperature

CSA C22.2 No 14-95 UL 508 EN 60497-5-1

CSA, UL, VDE 0660

IP 65 as per IEC 529 NEMA 4 x 12 as per UL 50

-25C to + 70C

Non Non IIlluminated Switcheslluminated SwitchesTypes of Actuators:Types of Actuators:

Flush Projecting Booted Recessed Relay Reset Mushroom

• Head 40 / 60 / 30• Momentary• Latching• Push-pull• Key lockable• Trigger type

Selectors Selectors Maintained contact, 2 pos. or 3 pos Spring return, 2 pos. or 3 pos Standard knob / Extended knob

Key Selectors Key Selectors Maintained contact 2 pos. or 3 pos Spring return two pos. or 3 pos Key removable in different positions

Twin Actuator Twin Actuator

Non Non IIlluminated Switcheslluminated Switches

Types of ActuatorsTypes of Actuators Flush Projecting Projecting Push Push Selector

• 2 pos. or 3 pos. maintained contact• 2 pos. or 3 pos. spring return

Twin illuminated Mushroom 40 push - pull

Types of Lamp Holders for above Illuminated Actuators Types of Lamp Holders for above Illuminated Actuators Filament Bulb Integral LED LED Bulb

IIlluminated Switcheslluminated Switches

Lamp holders for Lamp holders for IIlluminated Switcheslluminated Switches

Filament BulbFilament Bulb Direct connection up to 380V With resistor suitable for 24V, 48V, 110V and 230V AC/DC With resistor and diode suitable for 240V AC Bulb BA9S, 2 - 2.6 watts

LED Lamp HoldersLED Lamp Holders Advantages of LED v/s FilamentAdvantages of LED v/s Filament Bulb Bulb

LED Filament Long life up to 100,000 hrs Very low power consumption 0.5 watts Nominal change in temperature of the body above ambient

Normal life up to 2000 hrs Power consumption varying between 2 – 5 watts The body of the lamp holder gets heated up to 60º C above the ambient.

Lamp holders for Lamp holders for IIlluminated Switcheslluminated Switches

Integral LED lamp holdersIntegral LED lamp holders

LED’s fixed, cannot be replaced LED’s available with different colours Current consumption max. 20 mA Short circuit protection with built in fuse (optional) Voltage limits ± 20% of rated voltage Low voltage glow protection up to 20 % of operating voltage Available from 12V to 230V AC or DC, 415 V AC

Lamp holders for Lamp holders for IIlluminated Switcheslluminated Switches

LED Bulb Lamp HoldersLED Bulb Lamp Holders

BA9S, LED bulbs / max. 1 watt Different colours available Current consumption 20 mA max Voltage limits ± 20% of rated voltage Available for 24V AC/DC, 110V AC/DC and 230V AC or 220V DC

Lamp holders for Lamp holders for IIlluminated Switcheslluminated Switches

Pilot LightsPilot Lights

Filament Bulbs Integral LED LED Bulbs Universal LED Transformer

Universal LED HoldersUniversal LED Holders Integral LED, non-replaceable Wide band holder can be used from 24V AC/DC supply to 230V AC/DC supply Different colours available

Lamp Holders for Pilot LightsLamp Holders for Pilot Lights

Voltages ApplicableVoltages Applicable

Incoming voltage Voltage output at bulb point

230 V230 V230 V110 V110 V110 V

06 V12 V24 V06 V12 V24 V

Pilot LightsPilot LightsTransformer Type Lamp HolderTransformer Type Lamp Holder(option of Filament Bulb / LED Bulb)

Contact ElementsContact Elements

Rating AC 15 4A 415AC } as per IEC 60947-5-1-2000DC 13 0.5Amp 110V DC }

A600 Q600 } as per CSA 22.2 No 13–95, UL508

Self wiping Mechanical life over 2 million operations 1 NO or 1NC Actuator mounting / base mounting Standard Silver plated carriers Gold plated available for low voltage, low current switching circuits < 25mA Shrouded terminals

6 Contact elements stackable in case of individual mounting elements. 6 contact elements can be assembled incase of non-illuminated actuators and 4 contact elements incase of illuminated actuators

Contact ElementsContact ElementsSalient characteristicsSalient characteristics

AccessoriesAccessories

Anodised aluminium legend plates blank / legend Spare Filament Bulbs / LED Bulbs Spare lenses for pilot lights / illuminated actuators Boots for non illuminated flush actuators & twin actuators Boots for illuminated flush, projecting & twin actuators Blind plugs for blanking holes Bulb extractor Stainless steel guard for non illuminated flush / projecting / mushroom actuators Push pull mechanism to convert momentary actuators into latching type