Saint Martin BMX 2012
18
2012 PRODUCTS CATALOG
-
Upload
bmx-groupment -
Category
Documents
-
view
242 -
download
5
description
Saint Martin BMX 2012 catalog
Transcript of Saint Martin BMX 2012
2 0 1 2 p r o d u c t s c a t a l o g
alex Jumelinphoto : Fat Tony
cover : Nao YoshidaPhoto : Urry
Darwin Complete Bike p.3
AJ LINE
Foot Jam Frame p.5
aJ Fork / aJ handelbar p.6
aJ Fork Risers / aJ Pegs p.7
aJ seat p.8
evo LINE
Evo Frame p.10
Evo Crank Two Pieces / Evo Crank splined p.11
Evo Rim / Front hub / Pegs p.12
Evo Front Wheel / sprockets p.13
parts
Cd sprockets / Freecoaster hub p.14
X26 stem / Pivotal seatpost p.15
small Parts p.16
Table of Contents
DARWINComplete Bike
Features
100 % cr-mo frame100 % cr-mo fork, 0 mm offsetintegrated headset8’’ Evo-style handelbar30 mm reach stem152 mm 3-pc tubular cr-mo crank25/9 gear ratiosealed spanish BB setTaska U-free sealed freecoaster hub36 holes alloy rimsloose balls front hub20×1.75 Kenda tiresTektro U-brake, Rush leversPivotal slim plastic seat2012 colors : black / matt whiteweight : 10.9 kg / 24 lbs
Specs
Frame St-Martin Darwin, full 4130 Cr-Mo, integrated head tube, Spanish BB, removable gyro tabs, 5mm laser cut dropouts, weld-on seat clamp
Fork St-Martin full 4130 Cr-Mo, 0mm offset, long steer tube (180 mm), M25 threaded top cap with big hole, 5 mm laser cut dropouts
Head set Integrated, Campagnolo style sealed bearings + 6 spacers (4 mm each)
stem Short frontload, 30 mm reach
Handlebar St-Martin 2 pcs, raise 8”, width 24.5”, low crossbar
grips Kraton, 130 mm, no flanges, with plastic bar ends
crank Tubular Cr-Mo 152 mm arms, 8 splines axle
bb set Spanish BB sealed bearings
sprocket 25T, 5 mm thick alloy
cHain KMC Z410, 1/2” x 1/8”
pedals Wellgo plastic, Cr-Mo axle
rims Lightweight alloy, single wall, 36 holes, machined sidewalls
Front Hub 36 holes, low flanges, loose balls, 3/8’’ Cr-Mo axle
rear Hub Taska U-free freecoaster, sealed bearings, with 9T driver, 36 holes, 3/8” Cr-Mo axle
spokes Front : 1-cross, rear : 3-cross
tires Kenda Kontact 20×1.75’’
pegs Knurling, 38 mm, 110 mm, alloy, rounded end, 4 pcs
seat post Pivotal 300 mm
seat Pivotal slim, plastic
levers Rush 2 fingers
u-brakes Tektro
detangler Standard detangler, 2-in-1 short cables
Frame geometry
Top tube : 18.9’’Chain stay : 12,6’’ slammedHead angle : 75°Seat angle : 71°BB height : 11,8’’
Only one St-Martin complete bike : the Darwin. All you can expect from a complete flatland bikeupgradesFrom 2011 darwinnew front triangle with straight tubes18.9’’ top tube12.6’’ chain stays
AJ LineBrand new Saint Martin products line developped by Alex JumelinFor riders who expect modern riding
alex Jumelinphoto : Vincent Perraud
foot jamframeAJ Line
geometry
100 % Sanko cr-mo tubingtop tube : 18.7” or 19.4”chainstays : 12.6”head angle : 75°seat angle : 71°BB height : 12.8”1.84 kg / 4.1 lbs
Alex Jumelin signature frame. Ultra-street looking frame
specs
thick tubesshort head tube, Campagnolo standardhigh BB position, Spanish standardbulged seat stays near seat tubenarrow rear triangle : seat stays and chain stays are welded inside dropouts to reduce overall width4 mm dropouts for 3/8” axleintegrated chain tensioners inside dropoutsinternal seat clamp in top tube, Strawberry patentbrakeless only2012 colors : matt black / smoked chrome
alex Jumelinphoto : simon Cassol
aj fork100 % heat treated Cr-Mo28.6 mm butted legs0° degree offsetvery narrow lower legssmall 5mm dropoutsintegrated crown cone for integrated headset onlyM25 top cap, 7075-T6 alloy (17 grams / 0.6 lb), available separatelybrakeless or with welded low-stack brake pivots180 mm long steer tubeV-cut steer tube for optimized cable route2 risers included : + 7 mm or + 14mm820 grams / 29.3 oz 2012 colors : black / smoked chrome
aj handlebar2-pc street-style handlebar8.75” high27.2” wide2° back sweep1° up sweep100 % heat treated strong and thick Cr-Mo19 mm crossbar3 saw lines each side for a clean cut858 grams / 30.6 oz2012 colors : black / smoked chrome
AJ Line
nao YosHida photo : Urry
AJ Line
aj pegsAlex Jumelin’s idea : very short pegs45 mm long6061-T6 alloy38 mm O.D.rounded endknurling surface45 grams / 1.6 oz (pc) 2012 colors : black / bronze
aj fork risersput one of them under your lower headset bearing to raise the front end of your bikemore space between front tire and frame downtube2 sizes : 7 mm and 14 mm7 mm model modifies the head angle of minus 0.5° (from 75.0° to 74.5° for example)14 mm model modifies the head angle of minus 1.0° (from 75,0° to 74,0° for example)for intregrated headset only
alex Jumelinphoto : Vincent Perraud
aj seatPivotal seatslim profileslim rear bumperskevlar coverAJ embroded logo246 grams / 8.8 oz 2012 color : black
AJ Line
nao YosHida photo : Urry
EVO LineClassic saint martin products line Revisited for modern riding
manu massabovaphoto : Laurent Chazoule
evoframeevo Line
geometry
100 % Sanko cr-mo tubingtop tube : 18.5” or 19.2”chainstays : 12.1”head angle : 75°seat angle : 71°BB height : 12.0”1.84 kg / 4.1 lbs
Double diamond frame with regular BB position
specs
thick tubesshorter seat tubelonger chainstaysCampagnolo standard head tubeSpanish bottom bracketnarrow rear triangle : seat stays and chain stays are welded inside dropouts to reduce overall width4 mm dropouts for 3/8” axleintegrated chain tensioners inside dropoutsholes for removable brake/gyro parts, sold separatelyno weld-on seat clamp2012 colors : ED-black / bronze clear coated
romain georgesphoto : Benoit Linard
evo crank splinedstrong tubular flatland 3-pc crankfor splined sprocket only (no pin drive)19 mm heat treated cr-mo hollow axle155 mm heat treated cr-mo armsvery low profile, ankle-friendly arms765 grams / 27.3 oz 2012 colors : black / smoked chrome
evo Line
evo crank two piecesstrong tubular flatland 2.5-pc crank19 mm heat treated cr-mo hollow axle150 mm heat treated cr-mo round armspin drive for micro sprocketssmooth edges at axle area, with flush bolt on left sideright side drive onlyremoval tool included718 grams / 25.6 oz 2012 color : black aleksey prosHin
photo : alexander Bivol
evo rimbrakeless welded rim36 holesrounded profilesmooth, does not hurt handsSt-Martin white nylon rim tape included (also available separately)439 grams / 15.6 oz2012 colors : black
evo pegsregular pegs105 mm long6061-T6 alloy38 mm O.D.rounded endknurling surface82 grams / 2.9 oz (pc) 2012 colors : black / bronze
evo Line
evo hubfront36 holes7075-T6 alloy thick female axle6061-T6 alloy bi-taper bodythick flanges3/8” x 24 tpi cr-mo CNC hex boltshardware available separately235 grams / 8.4 oz including Cr-Mo bolts2012 color : black
Jason Fordephoto : Chris hill scott
evo Line
evo wheelfrontlightweight brakeless front wheelSt-Martin Evo welded rimSt-Martin Evo front hub36 strong stainless steel spokes, 1 cross840 grams / 1.85 lbs2012 color : all black
evo sprocket splined8-spokes sprocket7075-T6 alloy5 mm thicksplined central holeno need pin bolt, fits most 3-pc cranks with long splined area20T = 46 grams / 1.6 oz24T = 59 grams / 2.1 oz2012 color : black
Yoshihiro taka nisHikawaphoto : Nacky
parts
tomoaki YosHimuraphoto : Yasuto Watanabe
compact discsprocketcompact disc strong sprocket7075-T6 alloy3 mm thick22 mm hole + 19 mm adaptor 18T = 35 grams / 1.2 oz21T = 46 grams / 1.6 oz24T = 63 grams / 2.2 oz2012 color : black
freecoasterhubthis freecoaster hub comes as original equipment on the Darwin complete bikeuses KHE internal system36 holes6061-T6 alloy body3/8” Cr-Mo female axlesealed bearings1 pc Cr-Mo driver, 9T575 grams / 20.5 oz2012 colors : black
parts
X twenty six stem6061-T6 alloy26 mm reach4 hollow bolts (25 mm long)wedge clamp solution170 grams / 6.0 oz reusable packing : St-Martin sweat-band2012 color : black
pivotal seatpostfor Pivotal seats only6061-T6 alloy1”/25.4 mm O.D.330 mm long235 grams / 8.4 oz minimal packing for waste reduction2012 colors : black / silver
Yuji otaphoto : Nabeo
adrian lowkaJtisphoto : Kuba Banak
hub boltsfor female hub3/8” x 24 tpi, 30 mm longCNC from cr-mo material, for great strengthfor 17 mm socket wrenchsold as 2 pieces
RIM TAPESvinyl coated plastic20 mm widesold as pair
REMOVABLE BRAKE STUFFcomplete set for 2012 Evo frame : pivots, stoppers, gyro tabscompatible with any 2009-2012 St-Martin framescompatible with many frames on the market
parts
FORK TOP CAPcompatible with AJ forkcompatible with any fork using M25 thread7075-T6 alloyFor M8 allen key17 grams / 0.6 lb
Worldwide Distribution
aleksey prosHinphoto : alexander Popov
AUSTRIA
la Finca (Germany)[email protected]
AUSTRALIANEW ZEALAND
BELARUS
bmX.bY shopwww.bmx-shop.by / [email protected]
BELGIUMLUXEMBOURG
CANADA
unicorn bicycle distributionwww.unicorndistribution.blogspot.comUnicornbikes@gmail.com
CENTRAL EUROPE
gorb-X / [email protected]
CHINA
china bmXwww.chinabmx.com
COLOMBIA
tienda [email protected]
CZECH REPUBLIC
DENMARK
signature bmX (Finland)[email protected]
ESTONIA
signature bmX (Finland)[email protected]
FINLAND
signature [email protected]
FRANCE
GERMANYAUSTRIA
HONK HONG
cavalier [email protected]
HUNGARYCENTRAL EUROPE
gorb-X / [email protected]
INDONESIA
artell pro [email protected]
ITALY
Frontocean [email protected]
JAPAN
delirium [email protected]
KOREA
LATVIA
MEXICO
ortiz [email protected]
THE NETHERLANDS
NORWAYSWEDEN
PHILIPPINES
Flip [email protected]
POLAND
proletaryat [email protected]
RUSSIA
SINGAPORE
20 inch [email protected]
SPAIN
action wheels [email protected]
SWEDEN
element (see Norway)signature BMX (see Finland)
SWITZERLAND
TAIWAN
Friendly distributionwww.wretch.cc/blog/vickykatie
UNITED KINDGOM
Zeal [email protected]
USA
sidewall distributionwww.sidewalldistro.com
OTHERS COUNTRIESPlease contact us for distribution solutions : [email protected]
Warrantyst-Martin handles warranty case by case, with positive issue in most cases. however we might not replace all damaged frames or parts, because warranty does not cover normal wear and tear, misuse or neglect, or modification of the frame or part. Warranty applies only to the original owner and is not transferable. st-Martin shall not be responsible forincidental or consequential damages.
Contact us for any warranty issue : [email protected]
www.stmartinbmx.com
