SAFETY WITHOUT COMPROMISEuni en iso 6330:2012 water penetration resistance > 13000 pa uni-en...
4
SAFETY WITHOUT COMPROMISE TECHNIFORT SERIES MULTIPROTECT TEXTILE TECHNIFORT SERIES
Transcript of SAFETY WITHOUT COMPROMISEuni en iso 6330:2012 water penetration resistance > 13000 pa uni-en...
SAFETY WITHOUTCOMPROMISE
TECHNIFORT SERIES
MULTIPROTECT
TEXTILE
TECHNIFORT SERIES
A new concept of versatility arises frommulti-norms fabric scenario, combining together the best protection propertiesin one only fabric.
FeaturesThis fabric has extraordinary qualities thatmakes it unique in its type:
• High tensile strength and tear
• Two PTFE layers ensuring waterproof properties and breathability over the time
• Weave guaranteeing excellent abrasion resistance and tensile strength
• Protection against contact, radiant and convective heat, and molten metal splashes
• High protection against chemical and organic agents
• Excellent visibility thanks to fluorescent colours also in poor light condition (high visibility)
• Permanent electrostatic charges dissipation
• Flash arc certificate – class 1
• Nitrogen colourant and aromatic carcinogen ammine free that guarantees a complete safety and anti-allergen
SectorsMulti-utility - Industry - Oil&Gas - AIBHigh Visibility – Flash Arc
Technical description • Technical fabric - weft: Twill functional layer made of PTFE two-component membrane • Perfectly waterproof and breathable • Fire resistant- Flame Retardant• Tear and tensile strength • Permanent antistatic properties • Anti-acid treatment maintaining resistance after 50 washing cycles at 60°• Excellent puncture resistance• Excellent light fastness • High breathability, excellent Ret value• Nitrogen-free and Oeko-Tex Standard 100 certificate
Tensile strenght N
1000
weft
warp
800
600
400
valuenorm20471
valuenorm11611
valuenorm11612
valuenorm343
reached values during Cadmio
fabric test
200
580
1300
Resistance to washing Resistance to intensive maintenance, tested for 50 washing cycles ISO 6330
tensile strength/breakingafter 50 wash at 60°
1 2 3 4 5 6
Martindale abrasion resistance after50 washing at 60° > 2000 cycles - Level 6
Sweat
PTFE membranebreathable
ColdWaterMolten metal splash
Wind
Watervapour
Comfort• High breathability
MULTIPROTECT
TEXTILE
TECHNIFORT SERIES
PLEASE NOTICE: for other colours you need to ask for their availability
Certificates • UNI EN ISO 20471 high visibility
• UNI EN ISO 11612 A1-B1-C1-E2-F1 heat and flame protection
• UNI EN 1149-3-5 antistatic
• UNI EN 13034 limited chemical protection
• UNI EN ISO 11611 A1+A2 CL.1 protection for welder and related activities
• UNI EN ISO 14116 3/50H/60 heat and flame protection
• CEI EN 61482-1-2 index 3 Cl. 1 e 2 flash arc protection
• UNI EN 343 3/3 waterproof and breathable
class 3
class 2
Cadmio fabric RET < 5
class 1
RET ≤ 20
RET > 40
≥ 20 RET ≤ 40
Water vapour resistanceRET (M2Pa/W)
high breathability
low breathability
DESCRIPTION FEATURES NORMS
COMPOSITION
75 % COTTON
24 % POLYESTER
1 % ANTISTATIC FIBER
FUNCTIONAL LAYER TWO-COMPONENTS PTFE MEMBRANE
WEGHT [g/m2] 285 g/m2 (+/- 10%) UNI EN 40339-2002
TOTAL WIDTH cm. N/A
CUTTABLE WIDTH cm 147
WEAVE TWILL/BATAVIA
PHYSICAL ANALYSIS
TEAR STRENGHT (N ) WARP > 135 WEFT > 80
UNI EN ISO 4674+ UNI EN ISO 6330:2012
TENSILE STRENGHT (N ) WARP > 1290WEFT > 580
UNI EN ISO 13934-1+ UNI EN ISO 6330:2012
SHRINKAGE TO WASHING(%) WARP +/- 3% MAX.WEFT +/- 3% MAX. UNI EN ISO 6330:2012
PUNCTURE RESISTANCE (N ) > 40 - CLASS 3 UNI EN 863: 1996 + UNI EN ISO 6330:2012
ABRASION RESISTANCE CLASS ≥ 6 UNI EN 530:2011 Method 2
MARTINDALE ABRASION RESISTANCE >2000 CYCLES - LEVEL ≥ 6 UNI-EN 530:2011 Method 2 + UNI EN ISO 6330:2012
WATER PENETRATION RESISTANCE > 13000 Pa UNI-EN 20811:1993 + UNI EN ISO 6330:2012
WATER VAPOUR RESISTANCE Ret (m2Pa/W) < 5 ISO 11092:2014
LIGHT FASTNESS > 4 UNI EN ISO 105
OTHER FEATURES
MAINTENANCE SYMBOL
CERTIFICATES
EN ISO 1149-3-5 EN ISO 61482-1-2 4kA Class 1
EN ISO 13034 Type 6 14116 index 3/50H/60
EN ISO 11612 A1-A2-B1-C1-E1-F1 11611 Class 1 A1+A2
EN ISO 20471 50 cycles
FABRIC TECHNICAL DATA
CADMIO
