TIPS TO FOLLOW WHEN USING

OSCILLATINGMULTI-TOOLS5

OSCILLATING MULTI-TOOLS CAN BE USE TO:

• Cut• Scrape• Sand• Slice• They can do this on a wide range of materials including wood, metal, cardboard, and plastic, etc.

#1 – FOLLOW USER MANUAL

• Do not begin without reading the manual.

• Refer to the manual when attaching accessories or performing various tasks.

• Not using the manual invalidates the warranty.

#2 – WEAR PROTECTIVE GEAR

• Protect your eyes from fine dust with safety glasses.

• Use earmuffs to protect your ears from loud sounds.

• Wear gloves to protect your hands from injury.

#3 – AVOID USING THE TOOL IN WET AREAS

• Prevent fire hazards by keeping the tool away from water.

• Ensure water sources are turned off if you are working near them.

• Keep the work area dry.

#4 – STORE THE MULTI-TOOLSAFELY

• Keep the tool away from children.

• Store it in a cool, dry place away from the sun.

• Remove batteries and oscillating tool blades• when not in use.

#5 – TO CHANGE THE BLADE

• Switch off the tool and unplug it.

• Do not unplug the cord by pulling it.

• Allow the blade to cool before removing it.

Visit - https://fitzallblades.com/