SAFETY DATA SHEET Dielectric Grease - Cyclo Australia · 2020. 4. 15. · Revision: 09/26/2017...
4
09/26/2017 Revision: Page: 1 Dielectric Grease SAFETY DATA SHEET 05/22/2014 Supersedes Revision: C706 Product Code: Dielectric Grease Product Name: CYCLO INDUSTRIES, INC. Company Name: 902 SOUTH US HIGHWAY 1 JUPITER, FL 33477 First Aid Emergency Emergency Contact: (800)752-7869 CHEMTREC (703) 527-3887 (800)424-9300 First Aid Emergency (Outside U.S.) Information: (312)906-6194 (800)843-7813 Phone Number: Dielectric Grease Intended Use: www.cyclo.com Web site address: 1. Product and Company Identification [email protected] Email address: 2. Hazards Identification No phrases apply. GHS Precaution Phrases: P301+330+331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P304+340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. P303+361+353: IF ON SKIN (or hair): Remove/take off immediately all contaminated clothing. Rinse skin with water/shower. P363: Wash contaminated clothing before reuse. P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P309+311: Call a POISON CENTER or doctor/physician if exposed or you feel unwell. GHS Response Phrases: P501: Dispose of contents/container in accordance with local/regional/national/international regulation. GHS Storage and Disposal Phrases: No phrases apply. GHS Hazard Phrases: None GHS Signal Word: CAS # Hazardous Components (Chemical Name) 3. Composition/Information on Ingredients Concentration 4. First Aid Measures If swallowed, do not induce vomiting. If inhaled, remove to fresh air. If in eyes, rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. In case of skin contact, remove contaminated clothing. Flush exposed area with large quantities of water. Call physician immediately if adverse reaction occurs. Emergency and First Aid Procedures: MIRS MSDS, (c) A V Systems, Inc. GHS format
Transcript of SAFETY DATA SHEET Dielectric Grease - Cyclo Australia · 2020. 4. 15. · Revision: 09/26/2017...
09/26/2017Revision:
Page: 1
Dielectric GreaseSAFETY DATA SHEET
05/22/2014Supersedes Revision:
C706Product Code:Dielectric GreaseProduct Name:CYCLO INDUSTRIES, INC.Company Name:902 SOUTH US HIGHWAY 1JUPITER, FL 33477
First Aid EmergencyEmergency Contact: (800)752-7869CHEMTREC (703) 527-3887 (800)424-9300First Aid Emergency (Outside U.S.)Information: (312)906-6194
(800)843-7813Phone Number:
Dielectric GreaseIntended Use:
www.cyclo.comWeb site address:
1. Product and Company Identification
[email protected] address:
2. Hazards Identification
No phrases apply.GHS Precaution Phrases:P301+330+331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.P304+340: IF INHALED: Remove victim to fresh air and keep at rest in a positioncomfortable for breathing.P303+361+353: IF ON SKIN (or hair): Remove/take off immediately all contaminatedclothing. Rinse skin with water/shower.P363: Wash contaminated clothing before reuse.P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Removecontact lenses, if present and easy to do. Continue rinsing.P309+311: Call a POISON CENTER or doctor/physician if exposed or you feel unwell.
GHS Response Phrases:
P501: Dispose of contents/container in accordance withlocal/regional/national/international regulation.
GHS Storage and DisposalPhrases:
No phrases apply.GHS Hazard Phrases:NoneGHS Signal Word:
CAS # Hazardous Components (Chemical Name)
3. Composition/Information on IngredientsConcentration
4. First Aid MeasuresIf swallowed, do not induce vomiting. If inhaled, remove to fresh air. If in eyes, rinsecautiously with water for several minutes. Remove contact lenses, if present and easy todo. Continue rinsing. In case of skin contact, remove contaminated clothing. Flushexposed area with large quantities of water. Call physician immediately if adversereaction occurs.
Emergency and First AidProcedures:
MIRS MSDS, (c) A V Systems, Inc. GHS format
09/26/2017Revision:
Page: 2
Dielectric GreaseSAFETY DATA SHEET
05/22/2014Supersedes Revision:
5. Fire Fighting MeasuresFlash Pt: > 500.00 F (260.0 C) Method Used: Cleveland Open Cup
Avoid use of water streams. If ignited, product may produce dense smoke. Firefightersshould wear self-contained breathing apparatus.
Fire Fighting Instructions:
Drums or pails heated by fire can support combustion.Flammable Properties andHazards:
Autoignition Pt: No data.Explosive Limits: LEL: No data. UEL: No data.
Carbon dioxide, dry chemical, foam.Suitable Extinguishing Media:
No data available.Hazardous CombustionProducts:
6. Accidental Release MeasuresMop up or otherwise absorb and hold for disposal.Steps To Be Taken In Case
Material Is Released OrSpilled:
7. Handling and StorageKeep out of the reach of children.Precautions To Be Taken in
Handling:Keep container closed during storage.Precautions To Be Taken in
Storing:
8. Exposure Controls/Personal ProtectionOSHA TWA ACGIH TWACAS # Partial Chemical Name Other Limits
No data available.Respiratory Equipment(Specify Type):
Safety glasses or face shield if method of dispensing promotes splashing.Eye Protection:Rubber or plastic recommended.Protective Gloves:No data available.Other Protective Clothing:No data available.Engineering Controls
(Ventilation etc.):
9. Physical and Chemical PropertiesPhysical States: [ ] Gas [ X ] Liquid [ X ] Solid
Melting Point: No data.Boiling Point: >= 300.00 F (148.9 C)Flash Pt: > 500.00 F (260.0 C) Method Used: Cleveland Open Cup
Explosive Limits: LEL: No data. UEL: No data.Vapor Pressure (vs. Air ormm Hg):
No data.
Vapor Density (vs. Air = 1): No data.
Evaporation Rate: < 1
pH: No data.Translucent white paste with oily texture.Appearance and Odor:
Flammability (solid, gas): No data available.
MIRS MSDS, (c) A V Systems, Inc. GHS format
09/26/2017Revision:
Page: 3
Dielectric GreaseSAFETY DATA SHEET
05/22/2014Supersedes Revision:
Specific Gravity (Water = 1): 1.03Solubility in Water: Less than 1%
Decomposition Temperature: No data.Autoignition Pt: No data.
Viscosity: No data.
Octanol/Water PartitionCoefficient:
No data.
10. Stability and Reactivity
No data available.Conditions To Avoid -Instability:
Unstable [ ] Stable [ X ]Stability:
Strong oxidizers, concentrated oxygen.Incompatibility - Materials ToAvoid:
Oxides of carbon and silicon.Hazardous Decomposition orByproducts:
Will occur [ ] Will not occur [ X ]Possibility of HazardousReactions:
No data available.Conditions To Avoid -Hazardous Reactions:
CAS # Hazardous Components (Chemical Name) NTP
11. Toxicological InformationNo data available.Toxicological Information:
IARC ACGIH OSHA
No data available.12. Ecological Information
Dispose of contents/container in accordance with local/regional/national/internationalregulation.
Waste Disposal Method:13. Disposal Considerations
14. Transport Information
Not-RegulatedDOT Proper Shipping Name:DOT Hazard Class:UN/NA Number:
LAND TRANSPORT (US DOT):
Not-RegulatedADR/RID Shipping Name:LAND TRANSPORT (European ADR/RID):
UN Number:Hazard Class:
Not-RegulatedIMDG/IMO Shipping Name:MARINE TRANSPORT (IMDG/IMO):
Not-RegulatedICAO/IATA Shipping Name:AIR TRANSPORT (ICAO/IATA):
MIRS MSDS, (c) A V Systems, Inc. GHS format
09/26/2017Revision:
Page: 4
Dielectric GreaseSAFETY DATA SHEET
05/22/2014Supersedes Revision:
CAS # Hazardous Components (Chemical Name)
15. Regulatory Information
S. 302 (EHS) S. 304 RQ S. 313 (TRI)EPA SARA (Superfund Amendments and Reauthorization Act of 1986) Lists
CAS # Hazardous Components (Chemical Name) Other US EPA or State Lists
CAS # Hazardous Components (Chemical Name) International Regulatory Lists
16. Other Information
No data available.Additional Information AboutThis Product:
Hazard Rating System: Instability
Special Hazard
Health
Flammability
Cyclo Industries, Inc. provides the information contained herein in good faith but makesno representation as to its comprehensiveness or accuracy. Individuals receiving thisinformation must exercise their independent judgment in determining its appropriatenessfor a particular purpose. Cyclo Industries, Inc. makes no representations or warranties,either expressed or implied, of merchantability, fitness for a particular purpose withrespect to the information set forth herein or to the product to which the informationrefers. Accordingly, Cyclo Industries, Inc. will not be responsible for damages resultingfrom use of or reliance upon this information.
Company Policy orDisclaimer:
10
0
09/26/2017Revision Date:
NFPA:
MIRS MSDS, (c) A V Systems, Inc. GHS format
