Safety and environmental concerns Longer start up time ...€¦ · VENTIL Polakweg 6 2288 GE...
Transcript of Safety and environmental concerns Longer start up time ...€¦ · VENTIL Polakweg 6 2288 GE...
VENTIL Polakweg 62288 GE Rijswijk The NetherlandsT: +31 (0) 70 320 93 27F: +31 (0) 70 320 37 37 E: [email protected]: www.ventil.nl
VENTIL RUSSIA (Moscow)LARMAX International B.V.Представительство в Москвеул. Достоевского 21127473 МОСКВАРоссийская ФедерацияТ: +7 495 755 5713Ф: +7 495 755 6974E: [email protected]
VENTIL KAZAKHSTAN (Almaty)LARMAX International B.V.Представительство в Алматыпр. Абая 151/115, бизнес-центр «Алатау», оф. 1110050009 АЛМАТЫРеспублика КазахстанТ: +7 727 334 0703Ф: +7 727 2668536E: [email protected]
VENTIL USA904 Gemini St.Houston, TX 77058USAT: +1 281 280 0141F: +1 281 280 0838E: [email protected]: www.ventil-usa.com
VENTIL MIDDLE EAST FZCSharjah Airport International Free ZoneP.O. Box 8000, SharjahUnited Arab EmiratesE: [email protected]
Valve Academy, Focus on Flow Control
Valve Training Courses for;
Valve Professionals
Maintenance Technicians
Valve Engineers
Industrial valves and safety valves are final process elements and play a key role in the operation of a continuously
generating (petro)chemical process or power plant. They either block the pressure, regulate the fluid or protect the
process plant. Still 50 to 60% of the fugitive emission of industrial process plants is caused by leaking valves.
It is therefore obvious that the plant efficiency is directly affected by the non-performance of valves, either in terms
of output or in terms of reliability and availability.
Typical results of incorrect sizing, inferior quality and insufficient testing of valves are;
Safety and environmental concerns
Longer start up time
Loss of process availability and profitability
Frequent maintenance
Occasional plant trips
Collateral damage to other expensive plant equipment
A long and reliable working effect starts by selecting and sizing the right valve for each specific application.
Afterwards, the integrity, reliability and safety are only warranted when valves are given the right treatment.
The VENTIL VALVE ACADEMY is the guide to understanding valves, the process of selection,
maintenance and repair
WHAT SETS THE VENTIL VALVE ACADEMY APART?
The strength of the Ventil Valve Academy training program lays in the great practical character and independent
perspective to any valve manufacturer or brand.
OUR MISSION
Build Valve Professionals by delivering learning and development when, where and how the customer needs it.
OBJECTIVES
Provide the highest quality and brand independent information, giving plant management assurance that
they have the skilled people they need to maximize asset value.
Instructor-led training in different levels and tailored solutions for the specific application of the customer.
In-house courses, conducted at your company, anywhere in the world, on your schedule.
Ventil Valve AcademyBuilding the future, shared expertise
For more information, please visit our website:
www.ventilvalveacademy.com or e-mail to: [email protected]
As our industry evolves, and the big crew change marches on, knowledge and hands-on experience becomes
crucial. The Ventil Valve Academy is addressing this need through a variety of brand independent valve training
courses. The training courses have a great practical character and are conducted at one of the Ventil facilities or
organized in-house, wherever you want, whenever you want. Once you have followed a training course you have
access to our unlimited valve expert panel, ready to answer any practical or theoretical valve questions.
2
VENTIL Polakweg 62288 GE Rijswijk The NetherlandsT: +31 (0) 70 320 93 27F: +31 (0) 70 320 37 37 E: [email protected]: www.ventil.nl
VENTIL RUSSIA (Moscow)LARMAX International B.V.Представительство в Москвеул. Достоевского 21127473 МОСКВАРоссийская ФедерацияТ: +7 495 755 5713Ф: +7 495 755 6974E: [email protected]
VENTIL KAZAKHSTAN (Almaty)LARMAX International B.V.Представительство в Алматыпр. Абая 151/115, бизнес-центр «Алатау», оф. 1110050009 АЛМАТЫРеспублика КазахстанТ: +7 727 334 0703Ф: +7 727 2668536E: [email protected]
VENTIL USA904 Gemini St.Houston, TX 77058USAT: +1 281 280 0141F: +1 281 280 0838E: [email protected]: www.ventil-usa.com
VENTIL MIDDLE EAST FZCSharjah Airport International Free ZoneP.O. Box 8000, SharjahUnited Arab EmiratesE: [email protected]
Valve Academy, Focus on Flow Control
Valve Training Courses for;
Valve Professionals
Maintenance Technicians
Valve Engineers
Industrial valves and safety valves are final process elements and play a key role in the operation of a continuously
generating (petro)chemical process or power plant. They either block the pressure, regulate the fluid or protect the
process plant. Still 50 to 60% of the fugitive emission of industrial process plants is caused by leaking valves.
It is therefore obvious that the plant efficiency is directly affected by the non-performance of valves, either in terms
of output or in terms of reliability and availability.
Typical results of incorrect sizing, inferior quality and insufficient testing of valves are;
Safety and environmental concerns
Longer start up time
Loss of process availability and profitability
Frequent maintenance
Occasional plant trips
Collateral damage to other expensive plant equipment
A long and reliable working effect starts by selecting and sizing the right valve for each specific application.
Afterwards, the integrity, reliability and safety are only warranted when valves are given the right treatment.
The VENTIL VALVE ACADEMY is the guide to understanding valves, the process of selection,
maintenance and repair
WHAT SETS THE VENTIL VALVE ACADEMY APART?
The strength of the Ventil Valve Academy training program lays in the great practical character and independent
perspective to any valve manufacturer or brand.
OUR MISSION
Build Valve Professionals by delivering learning and development when, where and how the customer needs it.
OBJECTIVES
Provide the highest quality and brand independent information, giving plant management assurance that
they have the skilled people they need to maximize asset value.
Instructor-led training in different levels and tailored solutions for the specific application of the customer.
In-house courses, conducted at your company, anywhere in the world, on your schedule.
Ventil Valve AcademyBuilding the future, shared expertise
For more information, please visit our website:
www.ventilvalveacademy.com or e-mail to: [email protected]
As our industry evolves, and the big crew change marches on, knowledge and hands-on experience becomes
crucial. The Ventil Valve Academy is addressing this need through a variety of brand independent valve training
courses. The training courses have a great practical character and are conducted at one of the Ventil facilities or
organized in-house, wherever you want, whenever you want. Once you have followed a training course you have
access to our unlimited valve expert panel, ready to answer any practical or theoretical valve questions.
2
The Ventil Valve Academy training courses are offered in 3 levels; User, Maintenance and Engineering. Driven by
your job role and level of experience, other on-demand and multidiscipline courses are available to enhance the
relevance and usability of the technical content.
TEST SYSTEM OPERATOR DESIGNED FORIndividuals new to the use of the valve test equipment or technicians who wish to re-introduce themselves to the subject.
YOU WILL LEARN TO• Control the clamping system.• Operate the test system. • Select the test procedures.• Trace and measure leaks. • Understand and apply test standards.• Ensure safe operations.• Maintain / calibrate the test system. ABOUT THE COURSEThis course will provide the trainee with the knowledge to efficiently and safely use the test equipment and achieve accurate test results. This course is adapted to the type of test equipment and competence of the trainees.
VALVE OVERHAUL
DESIGNED FORMaintenance managers or supervisory personnel responsible for the process operations. Entrepreneurs who wish to get involved in valve repair.
YOU WILL LEARN TO• Design and manage the overhaul loop.• Understand all element of valve repair.• Identify / classify problems.• Understand the do’s and don’ts of valve repair.• Use OEM parts (repair or replace).• Apply registration and certification.
ABOUT THE COURSEBesides all the steps of the valve overhaul loop, this course gives a very good overview of the ‘business case’ of valve repair. The course includes a visit to a modern valve repair shop.
PROCESS LOOP ENGINEER
DESIGNED FORInstrument-, product- and process engineers who wish to understand the purpose and influence of control loop elements.
YOU WILL LEARN TO• Understand the ‘Control loop’.• Recognize the influences of control valve behavior.• Identify loop and control valve performance problems.• Use diagnostic process tools.
ABOUT THE COURSEThis course incorporates a balance between theory and applications. It provides an overview of all basic control elements of the process installation.
543
Training Levels and Multidiscipline Training Worldwide Training Courses*
*contact us for dates and locations
Basic, introductory training courses for valve users, traders and maintenance
engineers who have limited knowledge of valves and wish to gain a broader
perspective about their use and application. This is a ‘must’ for people new
to process controls, valve trading, valve repairers and supervisory personnel.
Multidiscipline training for maintenance / service engineers with a basic
knowledge of valve technology. The goal is to learn to recognize and solve
problems to restore the performance and integrity of the reconditioned valve
in order to enhance process reliability and reduce downtime.
Multidiscipline training intended for supervisory personnel or process
engineers seeking advanced training in specific subjects. These courses require
a basic knowledge of valve technology or needs to be preceded by a ‘user’
qualification.
USER
MAINTENANCE
ENGINEERING
SHUT-OFF VALVES DESIGNED FORIndividuals who have limited knowledge of valves and wish to gain a broader perspective about their use and application.
YOU WILL LEARN TO• Identify valve types and design principles.• Understand characteristics, strengths and weaknesses.• Recognize size and pressure class.• Understand basic selection criteria.
ABOUT THE COURSEThis course is a comprehensive guide to valves and valve technology. It is a ‘must’ for people new to process controls, valve trading or valve repair.
DESIGNED FORService engineers and valve repairers with basic experience or user qualification. YOU WILL LEARN TO• Recognize valve problems.• Run the overhaul loop.• Understand the do’s and don’ts.• Use OEM parts (replace or repair). • Execute pressure and performance tests.
ABOUT THE COURSEThis course gives a great practical inside in the valve repair process and enables the trainee to guarantee the integrity of the reconditioned valve.
DESIGNED FORSupervisory or process engineers involved in / or new to valve technology. This course requires a basic experience or ‘user’ qualification.
YOU WILL LEARN TO• Identify process conditions.• Select and size the right valve.• Recognize and solve valve problems.
ABOUT THE COURSEA comprehensive guide to all engineering fundamentals for selecting the right valve design for every industrial flow application.
VALVE AUTOMATION DESIGNED FORTechnicians / engineers involved in selecting valves who want to broaden their knowledge on Valve Automation.
YOU WILL LEARN HOW TO• Choose valve and actuator combinations• Understand torque and force spec. • Calculate actuator requirements.• Select instruments and accessories. • Read and understand valve and actuator specifications.
ABOUT THE COURSEThis course is a comprehensive guide to actuators and valve controls. It is a ‘must’ for people new to process controls, valve trading or valve repair.
SAFETY VALVES
DESIGNED FORTechnicians / engineers who use / select / install Safety valves or supervisory personnel responsible for process installations.
YOU WILL LEARN TO• Understand the purpose and application.• Understand the basic load constructions.• Recognize parts and components.• Understand operation, performance and opening characteristics.• Recognize DIN / ANSI design and application.
ABOUT THE COURSEThis course provides a basic understanding and overview of the design, working and application of Safety (relief) valves.
DESIGNED FORService engineers and valve repairers with basic experience or user qualification. YOU WILL LEARN TO• Recognize safety valve problems.• Run the overhaul loop.• Understand the do’s and don’ts.• Use of OEM parts (replace or repair). • (re)adjust and test.
ABOUT THE COURSEA very effective and practical course addressing all steps and elements of safety valve repair, reconditioning and testing.
DESIGNED FORSupervisory or process engineers new to Safety valve technology. This course requires a basic experience or ‘user’ qualification.
YOU WILL LEARN TO• Identify process criteria / conditions.• Select and size safety valves.• Recognize and solve safety valve problems.
ABOUT THE COURSEThis course will address all sizing and selection criteria including handling, plant conditions, installation advise and pipe work configurations.
IN-SITU TESTING OF SAFETY VALVES
DESIGNED FOROperators of In-Situ testers and supervisory personnel responsible for process installations and who can benefit from a broad overview.
YOU WILL LEARN TO• Understand the working and application in Vapor, liquid and steam service. • Choose the right diagnostic tools.• Operate the In-Situ tester.• Work in explosive atmospheres.• Identify PSV performance problems.
ABOUT THE COURSEThe course takes a very practical approach to In-situ testing of safety valves. The broad applications and limitations. In addition to the theory, the course contains practical use of the Ventil PreVenTest system.
CONTROL VALVES
DESIGNED FORTechnicians / engineers involved in control systems. Operators or supervisory personnel who can benefit from a broad overview of the ‘final’ control element.
YOU WILL LEARN TO• Understand the ‘Control loop’.• Recognize types and characteristics.• Recognize trim types and styles.• Recognize and understand actuators.• Understand the application of other accessories. ABOUT THE COURSEThis course provides a comprehensive overview of all basic control valve designs and explains how control valves regulate and condition the process.
DESIGNED FORService engineers and valve repairers with basic experience or user qualification. YOU WILL LEARN TO• Recognize and understand Control valve wear, flashing, cavitation and noise.• Execute control valve diagnostics.• Run the overhaul loop.• Execute stroking, seat leakage classifica-tion and pressure testing.
ABOUT THE COURSEThis course will provide the trainee with the knowledge to identify control valve problems, all steps of control valve over-haul, ‘stroking’ the trim and testing.
DESIGNED FORPracticing engineers and technicians who are seeking advanced training in sizing and problem solving. This course requires a basic experience or ‘user’ qualification.
YOU WILL LEARN TO• Select the proper valve characteristic and style for a given process.• Size control valves and actuators.• Properly apply controls and instrumentation. ABOUT THE COURSEThis course explains how to select the correct control valve, actuator and accessories to operate through the full range of process conditions. It addresses general applications and emphasizes the sizing and selection methods for a broad variety of control valves and actuators.
FUGITIVE EMISSION TESTING
DESIGNED FORTechnicians / engineers new to fugitive emission testing of valves or supervisory personnel responsible for the inspection of valves intended for application in volatile air pollutants and hazardous fluids
YOU WILL LEARN TO• Understand applications and requirements.• Select the right test method.• Use tracer gas and leak detectors.• Understand leak rates. • Understand and apply the test standards.
ABOUT THE COURSEEmissions standards for valves continue to tighten up. The course presents an overview of all different procedures and standards.
MA
INTE
NA
NC
EU
SER
ENG
INEE
RIN
G
The Ventil Valve Academy training courses are offered in 3 levels; User, Maintenance and Engineering. Driven by
your job role and level of experience, other on-demand and multidiscipline courses are available to enhance the
relevance and usability of the technical content.
TEST SYSTEM OPERATOR DESIGNED FORIndividuals new to the use of the valve test equipment or technicians who wish to re-introduce themselves to the subject.
YOU WILL LEARN TO• Control the clamping system.• Operate the test system. • Select the test procedures.• Trace and measure leaks. • Understand and apply test standards.• Ensure safe operations.• Maintain / calibrate the test system. ABOUT THE COURSEThis course will provide the trainee with the knowledge to efficiently and safely use the test equipment and achieve accurate test results. This course is adapted to the type of test equipment and competence of the trainees.
VALVE OVERHAUL
DESIGNED FORMaintenance managers or supervisory personnel responsible for the process operations. Entrepreneurs who wish to get involved in valve repair.
YOU WILL LEARN TO• Design and manage the overhaul loop.• Understand all element of valve repair.• Identify / classify problems.• Understand the do’s and don’ts of valve repair.• Use OEM parts (repair or replace).• Apply registration and certification.
ABOUT THE COURSEBesides all the steps of the valve overhaul loop, this course gives a very good overview of the ‘business case’ of valve repair. The course includes a visit to a modern valve repair shop.
PROCESS LOOP ENGINEER
DESIGNED FORInstrument-, product- and process engineers who wish to understand the purpose and influence of control loop elements.
YOU WILL LEARN TO• Understand the ‘Control loop’.• Recognize the influences of control valve behavior.• Identify loop and control valve performance problems.• Use diagnostic process tools.
ABOUT THE COURSEThis course incorporates a balance between theory and applications. It provides an overview of all basic control elements of the process installation.
543
Training Levels and Multidiscipline Training Worldwide Training Courses*
*contact us for dates and locations
Basic, introductory training courses for valve users, traders and maintenance
engineers who have limited knowledge of valves and wish to gain a broader
perspective about their use and application. This is a ‘must’ for people new
to process controls, valve trading, valve repairers and supervisory personnel.
Multidiscipline training for maintenance / service engineers with a basic
knowledge of valve technology. The goal is to learn to recognize and solve
problems to restore the performance and integrity of the reconditioned valve
in order to enhance process reliability and reduce downtime.
Multidiscipline training intended for supervisory personnel or process
engineers seeking advanced training in specific subjects. These courses require
a basic knowledge of valve technology or needs to be preceded by a ‘user’
qualification.
USER
MAINTENANCE
ENGINEERING
SHUT-OFF VALVES DESIGNED FORIndividuals who have limited knowledge of valves and wish to gain a broader perspective about their use and application.
YOU WILL LEARN TO• Identify valve types and design principles.• Understand characteristics, strengths and weaknesses.• Recognize size and pressure class.• Understand basic selection criteria.
ABOUT THE COURSEThis course is a comprehensive guide to valves and valve technology. It is a ‘must’ for people new to process controls, valve trading or valve repair.
DESIGNED FORService engineers and valve repairers with basic experience or user qualification. YOU WILL LEARN TO• Recognize valve problems.• Run the overhaul loop.• Understand the do’s and don’ts.• Use OEM parts (replace or repair). • Execute pressure and performance tests.
ABOUT THE COURSEThis course gives a great practical inside in the valve repair process and enables the trainee to guarantee the integrity of the reconditioned valve.
DESIGNED FORSupervisory or process engineers involved in / or new to valve technology. This course requires a basic experience or ‘user’ qualification.
YOU WILL LEARN TO• Identify process conditions.• Select and size the right valve.• Recognize and solve valve problems.
ABOUT THE COURSEA comprehensive guide to all engineering fundamentals for selecting the right valve design for every industrial flow application.
VALVE AUTOMATION DESIGNED FORTechnicians / engineers involved in selecting valves who want to broaden their knowledge on Valve Automation.
YOU WILL LEARN HOW TO• Choose valve and actuator combinations• Understand torque and force spec. • Calculate actuator requirements.• Select instruments and accessories. • Read and understand valve and actuator specifications.
ABOUT THE COURSEThis course is a comprehensive guide to actuators and valve controls. It is a ‘must’ for people new to process controls, valve trading or valve repair.
SAFETY VALVES
DESIGNED FORTechnicians / engineers who use / select / install Safety valves or supervisory personnel responsible for process installations.
YOU WILL LEARN TO• Understand the purpose and application.• Understand the basic load constructions.• Recognize parts and components.• Understand operation, performance and opening characteristics.• Recognize DIN / ANSI design and application.
ABOUT THE COURSEThis course provides a basic understanding and overview of the design, working and application of Safety (relief) valves.
DESIGNED FORService engineers and valve repairers with basic experience or user qualification. YOU WILL LEARN TO• Recognize safety valve problems.• Run the overhaul loop.• Understand the do’s and don’ts.• Use of OEM parts (replace or repair). • (re)adjust and test.
ABOUT THE COURSEA very effective and practical course addressing all steps and elements of safety valve repair, reconditioning and testing.
DESIGNED FORSupervisory or process engineers new to Safety valve technology. This course requires a basic experience or ‘user’ qualification.
YOU WILL LEARN TO• Identify process criteria / conditions.• Select and size safety valves.• Recognize and solve safety valve problems.
ABOUT THE COURSEThis course will address all sizing and selection criteria including handling, plant conditions, installation advise and pipe work configurations.
IN-SITU TESTING OF SAFETY VALVES
DESIGNED FOROperators of In-Situ testers and supervisory personnel responsible for process installations and who can benefit from a broad overview.
YOU WILL LEARN TO• Understand the working and application in Vapor, liquid and steam service. • Choose the right diagnostic tools.• Operate the In-Situ tester.• Work in explosive atmospheres.• Identify PSV performance problems.
ABOUT THE COURSEThe course takes a very practical approach to In-situ testing of safety valves. The broad applications and limitations. In addition to the theory, the course contains practical use of the Ventil PreVenTest system.
CONTROL VALVES
DESIGNED FORTechnicians / engineers involved in control systems. Operators or supervisory personnel who can benefit from a broad overview of the ‘final’ control element.
YOU WILL LEARN TO• Understand the ‘Control loop’.• Recognize types and characteristics.• Recognize trim types and styles.• Recognize and understand actuators.• Understand the application of other accessories. ABOUT THE COURSEThis course provides a comprehensive overview of all basic control valve designs and explains how control valves regulate and condition the process.
DESIGNED FORService engineers and valve repairers with basic experience or user qualification. YOU WILL LEARN TO• Recognize and understand Control valve wear, flashing, cavitation and noise.• Execute control valve diagnostics.• Run the overhaul loop.• Execute stroking, seat leakage classifica-tion and pressure testing.
ABOUT THE COURSEThis course will provide the trainee with the knowledge to identify control valve problems, all steps of control valve over-haul, ‘stroking’ the trim and testing.
DESIGNED FORPracticing engineers and technicians who are seeking advanced training in sizing and problem solving. This course requires a basic experience or ‘user’ qualification.
YOU WILL LEARN TO• Select the proper valve characteristic and style for a given process.• Size control valves and actuators.• Properly apply controls and instrumentation. ABOUT THE COURSEThis course explains how to select the correct control valve, actuator and accessories to operate through the full range of process conditions. It addresses general applications and emphasizes the sizing and selection methods for a broad variety of control valves and actuators.
FUGITIVE EMISSION TESTING
DESIGNED FORTechnicians / engineers new to fugitive emission testing of valves or supervisory personnel responsible for the inspection of valves intended for application in volatile air pollutants and hazardous fluids
YOU WILL LEARN TO• Understand applications and requirements.• Select the right test method.• Use tracer gas and leak detectors.• Understand leak rates. • Understand and apply the test standards.
ABOUT THE COURSEEmissions standards for valves continue to tighten up. The course presents an overview of all different procedures and standards.
MA
INTE
NA
NC
EU
SER
ENG
INEE
RIN
G
The Ventil Valve Academy training courses are offered in 3 levels; User, Maintenance and Engineering. Driven by
your job role and level of experience, other on-demand and multidiscipline courses are available to enhance the
relevance and usability of the technical content.
TEST SYSTEM OPERATOR DESIGNED FORIndividuals new to the use of the valve test equipment or technicians who wish to re-introduce themselves to the subject.
YOU WILL LEARN TO• Control the clamping system.• Operate the test system. • Select the test procedures.• Trace and measure leaks. • Understand and apply test standards.• Ensure safe operations.• Maintain / calibrate the test system. ABOUT THE COURSEThis course will provide the trainee with the knowledge to efficiently and safely use the test equipment and achieve accurate test results. This course is adapted to the type of test equipment and competence of the trainees.
VALVE OVERHAUL
DESIGNED FORMaintenance managers or supervisory personnel responsible for the process operations. Entrepreneurs who wish to get involved in valve repair.
YOU WILL LEARN TO• Design and manage the overhaul loop.• Understand all element of valve repair.• Identify / classify problems.• Understand the do’s and don’ts of valve repair.• Use OEM parts (repair or replace).• Apply registration and certification.
ABOUT THE COURSEBesides all the steps of the valve overhaul loop, this course gives a very good overview of the ‘business case’ of valve repair. The course includes a visit to a modern valve repair shop.
PROCESS LOOP ENGINEER
DESIGNED FORInstrument-, product- and process engineers who wish to understand the purpose and influence of control loop elements.
YOU WILL LEARN TO• Understand the ‘Control loop’.• Recognize the influences of control valve behavior.• Identify loop and control valve performance problems.• Use diagnostic process tools.
ABOUT THE COURSEThis course incorporates a balance between theory and applications. It provides an overview of all basic control elements of the process installation.
543
Training Levels and Multidiscipline Training Worldwide Training Courses*
*contact us for dates and locations
Basic, introductory training courses for valve users, traders and maintenance
engineers who have limited knowledge of valves and wish to gain a broader
perspective about their use and application. This is a ‘must’ for people new
to process controls, valve trading, valve repairers and supervisory personnel.
Multidiscipline training for maintenance / service engineers with a basic
knowledge of valve technology. The goal is to learn to recognize and solve
problems to restore the performance and integrity of the reconditioned valve
in order to enhance process reliability and reduce downtime.
Multidiscipline training intended for supervisory personnel or process
engineers seeking advanced training in specific subjects. These courses require
a basic knowledge of valve technology or needs to be preceded by a ‘user’
qualification.
USER
MAINTENANCE
ENGINEERING
SHUT-OFF VALVES DESIGNED FORIndividuals who have limited knowledge of valves and wish to gain a broader perspective about their use and application.
YOU WILL LEARN TO• Identify valve types and design principles.• Understand characteristics, strengths and weaknesses.• Recognize size and pressure class.• Understand basic selection criteria.
ABOUT THE COURSEThis course is a comprehensive guide to valves and valve technology. It is a ‘must’ for people new to process controls, valve trading or valve repair.
DESIGNED FORService engineers and valve repairers with basic experience or user qualification. YOU WILL LEARN TO• Recognize valve problems.• Run the overhaul loop.• Understand the do’s and don’ts.• Use OEM parts (replace or repair). • Execute pressure and performance tests.
ABOUT THE COURSEThis course gives a great practical inside in the valve repair process and enables the trainee to guarantee the integrity of the reconditioned valve.
DESIGNED FORSupervisory or process engineers involved in / or new to valve technology. This course requires a basic experience or ‘user’ qualification.
YOU WILL LEARN TO• Identify process conditions.• Select and size the right valve.• Recognize and solve valve problems.
ABOUT THE COURSEA comprehensive guide to all engineering fundamentals for selecting the right valve design for every industrial flow application.
VALVE AUTOMATION DESIGNED FORTechnicians / engineers involved in selecting valves who want to broaden their knowledge on Valve Automation.
YOU WILL LEARN HOW TO• Choose valve and actuator combinations• Understand torque and force spec. • Calculate actuator requirements.• Select instruments and accessories. • Read and understand valve and actuator specifications.
ABOUT THE COURSEThis course is a comprehensive guide to actuators and valve controls. It is a ‘must’ for people new to process controls, valve trading or valve repair.
SAFETY VALVES
DESIGNED FORTechnicians / engineers who use / select / install Safety valves or supervisory personnel responsible for process installations.
YOU WILL LEARN TO• Understand the purpose and application.• Understand the basic load constructions.• Recognize parts and components.• Understand operation, performance and opening characteristics.• Recognize DIN / ANSI design and application.
ABOUT THE COURSEThis course provides a basic understanding and overview of the design, working and application of Safety (relief) valves.
DESIGNED FORService engineers and valve repairers with basic experience or user qualification. YOU WILL LEARN TO• Recognize safety valve problems.• Run the overhaul loop.• Understand the do’s and don’ts.• Use of OEM parts (replace or repair). • (re)adjust and test.
ABOUT THE COURSEA very effective and practical course addressing all steps and elements of safety valve repair, reconditioning and testing.
DESIGNED FORSupervisory or process engineers new to Safety valve technology. This course requires a basic experience or ‘user’ qualification.
YOU WILL LEARN TO• Identify process criteria / conditions.• Select and size safety valves.• Recognize and solve safety valve problems.
ABOUT THE COURSEThis course will address all sizing and selection criteria including handling, plant conditions, installation advise and pipe work configurations.
IN-SITU TESTING OF SAFETY VALVES
DESIGNED FOROperators of In-Situ testers and supervisory personnel responsible for process installations and who can benefit from a broad overview.
YOU WILL LEARN TO• Understand the working and application in Vapor, liquid and steam service. • Choose the right diagnostic tools.• Operate the In-Situ tester.• Work in explosive atmospheres.• Identify PSV performance problems.
ABOUT THE COURSEThe course takes a very practical approach to In-situ testing of safety valves. The broad applications and limitations. In addition to the theory, the course contains practical use of the Ventil PreVenTest system.
CONTROL VALVES
DESIGNED FORTechnicians / engineers involved in control systems. Operators or supervisory personnel who can benefit from a broad overview of the ‘final’ control element.
YOU WILL LEARN TO• Understand the ‘Control loop’.• Recognize types and characteristics.• Recognize trim types and styles.• Recognize and understand actuators.• Understand the application of other accessories. ABOUT THE COURSEThis course provides a comprehensive overview of all basic control valve designs and explains how control valves regulate and condition the process.
DESIGNED FORService engineers and valve repairers with basic experience or user qualification. YOU WILL LEARN TO• Recognize and understand Control valve wear, flashing, cavitation and noise.• Execute control valve diagnostics.• Run the overhaul loop.• Execute stroking, seat leakage classifica-tion and pressure testing.
ABOUT THE COURSEThis course will provide the trainee with the knowledge to identify control valve problems, all steps of control valve over-haul, ‘stroking’ the trim and testing.
DESIGNED FORPracticing engineers and technicians who are seeking advanced training in sizing and problem solving. This course requires a basic experience or ‘user’ qualification.
YOU WILL LEARN TO• Select the proper valve characteristic and style for a given process.• Size control valves and actuators.• Properly apply controls and instrumentation. ABOUT THE COURSEThis course explains how to select the correct control valve, actuator and accessories to operate through the full range of process conditions. It addresses general applications and emphasizes the sizing and selection methods for a broad variety of control valves and actuators.
FUGITIVE EMISSION TESTING
DESIGNED FORTechnicians / engineers new to fugitive emission testing of valves or supervisory personnel responsible for the inspection of valves intended for application in volatile air pollutants and hazardous fluids
YOU WILL LEARN TO• Understand applications and requirements.• Select the right test method.• Use tracer gas and leak detectors.• Understand leak rates. • Understand and apply the test standards.
ABOUT THE COURSEEmissions standards for valves continue to tighten up. The course presents an overview of all different procedures and standards.
MA
INTE
NA
NC
EU
SER
ENG
INEE
RIN
G
VENTIL Polakweg 62288 GE Rijswijk The NetherlandsT: +31 (0) 70 320 93 27F: +31 (0) 70 320 37 37 E: [email protected]: www.ventil.nl
VENTIL RUSSIA (Moscow)LARMAX International B.V.Представительство в Москвеул. Достоевского 21127473 МОСКВАРоссийская ФедерацияТ: +7 495 755 5713Ф: +7 495 755 6974E: [email protected]
VENTIL KAZAKHSTAN (Almaty)LARMAX International B.V.Представительство в Алматыпр. Абая 151/115, бизнес-центр «Алатау», оф. 1110050009 АЛМАТЫРеспублика КазахстанТ: +7 727 334 0703Ф: +7 727 2668536E: [email protected]
VENTIL USA904 Gemini St.Houston, TX 77058USAT: +1 281 280 0141F: +1 281 280 0838E: [email protected]: www.ventil-usa.com
VENTIL MIDDLE EAST FZCSharjah Airport International Free ZoneP.O. Box 8000, SharjahUnited Arab EmiratesE: [email protected]
Valve Academy, Focus on Flow Control
Valve Training Courses for;
Valve Professionals
Maintenance Technicians
Valve Engineers
Industrial valves and safety valves are final process elements and play a key role in the operation of a continuously
generating (petro)chemical process or power plant. They either block the pressure, regulate the fluid or protect the
process plant. Still 50 to 60% of the fugitive emission of industrial process plants is caused by leaking valves.
It is therefore obvious that the plant efficiency is directly affected by the non-performance of valves, either in terms
of output or in terms of reliability and availability.
Typical results of incorrect sizing, inferior quality and insufficient testing of valves are;
Safety and environmental concerns
Longer start up time
Loss of process availability and profitability
Frequent maintenance
Occasional plant trips
Collateral damage to other expensive plant equipment
A long and reliable working effect starts by selecting and sizing the right valve for each specific application.
Afterwards, the integrity, reliability and safety are only warranted when valves are given the right treatment.
The VENTIL VALVE ACADEMY is the guide to understanding valves, the process of selection,
maintenance and repair
WHAT SETS THE VENTIL VALVE ACADEMY APART?
The strength of the Ventil Valve Academy training program lays in the great practical character and independent
perspective to any valve manufacturer or brand.
OUR MISSION
Build Valve Professionals by delivering learning and development when, where and how the customer needs it.
OBJECTIVES
Provide the highest quality and brand independent information, giving plant management assurance that
they have the skilled people they need to maximize asset value.
Instructor-led training in different levels and tailored solutions for the specific application of the customer.
In-house courses, conducted at your company, anywhere in the world, on your schedule.
Ventil Valve AcademyBuilding the future, shared expertise
For more information, please visit our website:
www.ventilvalveacademy.com or e-mail to: [email protected]
As our industry evolves, and the big crew change marches on, knowledge and hands-on experience becomes
crucial. The Ventil Valve Academy is addressing this need through a variety of brand independent valve training
courses. The training courses have a great practical character and are conducted at one of the Ventil facilities or
organized in-house, wherever you want, whenever you want. Once you have followed a training course you have
access to our unlimited valve expert panel, ready to answer any practical or theoretical valve questions.
2