SAE Test Plan Software for MIL-STD-1553 PBA.pro-SCR-PTP-P ......
Transcript of SAE Test Plan Software for MIL-STD-1553 PBA.pro-SCR-PTP-P ......
SAE Test Plan Software
PBA.pro-SCR-PTP-PPBA.pro-SCR-VTP-PPBA.pro-SCR-PTP-E
SAE Test Plan Software for MIL-STD-1553
AIM’s PBA.pro-SCR-PTP-P, PBA.pro-SCR-VTP-P
and PBA.pro-SCR-PTP-E scripting packages
offer integrated solutions for the performance
of the ‘SAE AS4111’ and ‘SAE AS4112’ Test
Plans.
These script packages work together with AIM’s
MIL-STD-1553 test & simulation cards and the
PBA.proTM Databus Test & Analysis Software.
The PBA.pro-SCR-PTP-E script package takes full
advantage of AIM’s MILScopeTM cards which
have the onboard integrated Digital Scope
function.
PBA.pro-SCR-PTP-P (Production Test Plan)
AIM's PBA.pro-SCR-PTP-P dedicated scripting package is designed to run the MIL-STD-1553 'Protocol Tests' in accordance with the 'SAE AS4112' Remote Terminal Production Test Plan. This package requires the use of AIM's
MIL-STD-1553 test & simulation cards and the PBA.proTM
Databus Test & Analysis Software including the Test & Script Manager Component.
Avionics Databus Solutionswww.aim-online.com
DatabaseManager
Components
Test & ScriptManager
AIM ResourceComponents
CustomerComponents
3rd Party Resource
Components
RemoteControl
Components
Utility Resource
Components
Core Functionality
Framework & Designer
Components
PBA.proTM a modular,
scalable and integrated
approach for a broad
range of avionics and
more applications.
Right on Target
General:
The Scripting Packages offer full simulation of a
MIL-STD-1553 testing device. The independent Bus
Monitor functionality of the interface modules supports
an optional monitoring of the entire test procedure
MIL-STD-1553 traffic, extended by corresponding
‘Event Markers’ for an easy correlation between the
captured traffic and the performed test cases.
Setup of UUT parameters (e.g. subaddresses, illegal
commands) as well as global test parameters is done
via a simple ASCII encoded configuration file.
Dedicated script package related PBA.proTM dialogs
allows the user to run and configure the test procedures
with a minimum of operator interaction, e.g. for
production testing. However, full access to the test
procedure via the PBA.proTM Test and Script Manager
also supports UUT integration testing by manual
execution of test steps, if required.
AIM Office Contacts:
AIM GmbH Sasbacher Str.279111 FreiburgGermany
Tel: +49 761 45 22 90 Fax: +49 761 45 22 93 3 email: [email protected]
AIM UK Cressex Enterprise CentreLincoln Road, High WycombeBucks, HP12 3RB UK
Tel: +44 1494 446844 Fax: +44 1494 449324 email: [email protected]
Ordering Information
PBA.pro-SCR-PTP-P PBA.pro Python Scripts (Protocol Testing): For Supporting Protocol Testing of RT Production Test Plan (SAE AS4112)
PBA.pro-SCR-VTP-P PBA.pro Python Scripts (Protocol Testing): For Supporting Protocol Testing of RT Validation Test Plan (SAE AS4111)
PBA.pro-SCR-PTP-E PBA.pro Python Scripts (Electrical Testing): For Supporting Electrical Testing of RT Production Test Plan (SAE AS4112) Note: Requires AIM MIL-STD-1553 Interface with Digitising Scope Option
PBA.pro-SCR-VTP-P (Validation Test Plan)
AIM's PBA.pro-SCR-VTP-P dedicated scripting package is designed
to run the MIL-STD-1553 'Protocol Tests' in accordance with the
'SAE AS4111' Remote Terminal Validation Test Plan. This package
requires the use of AIM's MIL-STD-1553 test & simulation cards and
the PBA.proTM Databus Test & Analysis Software including the Test
& Script Manager Component.
PBA.pro-SCR-PTP-E (Electrical Waveform Test)
AIM's PBA.pro-SCR-PTP-E dedicated scripting package supports the
validation of MIL-STD-1553 'Electrical Waveform Tests' in
accordance with the 'SAE AS4112' Remote Terminal Production Test
Plan.
This package takes full advantage of AIM's MILScope MIL-STD-1553
test & simulation cards which have the onboard integrated Digital
Scope function used together with the PBA.proTM Databus Test &
Analysis Software for capturing and measuring MIL-STD-1553
waveforms in accordance with the test plan.
A detailed ‘White Paper’ which lists the supported tests as well as
further requirements for the use of the Scripting packages is
available on request.
Integration Support and Training
UUT Integration Support and/ or Training on the Scripting Packages
can be offered as additional costed options, based on the PBA.proTM
1-day or 2-day Training Packages.
Commercially, this product includes the PBA.pro-SCR-PTP-P.
Common Features for PBA.pro-SCR-PTP-P and
PBA.pro-SCR-VTP-P
Comprises a set of test scripts and user dialogs which fully
automates the 'Protocol Test' requirements
Setup of test configuration information (Operator, Inspector,
Tester, UUT)
Manual, semi-automatic or fully automated Test Sequences
Automatic generation of Test Reports & Logs
User configurable Test Reports (ASCII, XML, PDF Formats)
Automatic or manual Test Result Evaluation
MIL-STD-1553 Bus Monitoring and Logging to Disk of entire
Test Procedure traffic supported
Built-in provisions for automated UUT commanding (typically
subject to further UUT specific adaption/ integration of the
scripting package)
Comprises a set of test scripts and user panels which fully
automates the 'Electrical Waveform Tests' requirements
Setup of configuration data (Operator, Inspector, Tester, UUT)
Manual, semi-automatic or fully automated Test Sequences
Automatic generation of Test Reports & Logs
User configurable Test Reports (ASCII, XML, PDF Formats)
Automatic or manual Test Result Evaluation
Provisions for export of captured waveforms via the
MILScopeTM
© A
IM G
mbH
PBA
-pro
-SAE
_23M
ar20
12 •
Spe
cific
atio
ns a
re su
bjec
t to
chan
ge w
ithou
t not
ice.
AIM-USASeven Neshaminy InterplexSuite 211Trevose, PA 19053USATel: 267-982-2600Fax: 215-645-1580email: [email protected]
Right on Target