SAE Ferrous Material
3
1. Introduction 2. SAE Ferrous Materials Technical Reports 2.1 Numbering System SAE J402 MAY1997–SAE Numbering System for Wrought or Rolled Steel SAE J1086 JUL1995 and ASTM E527–Numbering Metals and Alloys 2.2 Carbon and Alloy Steels * ASTM A514/A514M-00a–Standard Specification for High-Yield- Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding * SAE J401 APR2000–Selection and Use of Steels * SAE J403 NOV2001–Chemical Compositions of SAE Carbon Steels * SAE J404 JUN2000–Chemical Compositions of SAE Alloy Steels SAE J409 FEB1995–Product Analysis-Permissible Variations from Specified Chemical Analysis of a Heat or Cast of Steel SAE J411 SEP1997–Carbon and Alloy Steels SAE J412 OCT1995–General Characteristics and Heat Treatments of Steels * SAE J413 FEB2002–Mechanical Properties of Heat Treated Wrought Steels SAE J415 JUL1995–Definition of Heat Treating Terms * SAE J450 FEB2002–Use of Terms Yield Strength and Yield Point * SAE J935 FEB2002–High-Strength Carbon and Alloy Die Drawn Steels * SAE J1081 NOV2000–Potential Standard Steels * SAE J1249 JUN2000–Former SAE Standard and Former SAE EX-Steels SAE J1397 MAY1992–Estimated Mechanical Properties and Machinability of Steel Bars * SAE J1442 SEP2003–High-Strength, Hot-Rolled Steel Bars SAE J2281 MAY1997–Selecting and Specifying Hot-Rolled Steel Bar Products 2.3 Carbon and Alloy Steel Hardenability SAE J406 MAY1998–Methods of Determining Hardenability of Steels SAE J1268 MAY1995–Hardenability Bands for Carbon and Alloy H Steels SAE J1868 SEP1993–Restricted Hardenability Bands for Selected Alloy Steels SAE J1975 NOV1997–Case Hardenability of Carburized Steels 2.4 Sheet and Strip Steel SAE J126 JUN1986–Selecting and Specifying Hot and Cold Rolled Steel Sheet and Strip SAE J810 MAR1996–Classification of Common Surface Imperfections in Sheet Steel SAE J863 JUN1986–Methods for Determining Plastic Deformation in Sheet Metal Stampings SAE J911 MAR1998–Surface Roughness and Peak Count Measurement of Cold-Rolled Steel Sheet SAE J940 OCT1994–Glossary of Carbon Steel Sheet and Strip Terms SAE J1058 DEC1999–Standard Sheet Steel Thickness and Tolerances SAE J1562 DEC1999–Selection of Zinc and Zinc-Alloy (Hot-Dipped and Electrodeposited) Coated Steel Sheet SAE Ferrous Materials Standards Manual 2004 Edition Table of Contents: + indicates New Report; * indicates Technical Revision
Transcript of SAE Ferrous Material
1. Introduction2. SAE Ferrous Materials Technical Reports 2.1 Numbering System SAE J402 MAY1997–SAE Numbering System for Wrought or Rolled Steel SAE J1086 JUL1995 and ASTM E527–Numbering Metals and Alloys 2.2 Carbon and Alloy Steels * ASTM A514/A514M-00a–Standard Specification for High-Yield- Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding * SAE J401 APR2000–Selection and Use of Steels * SAE J403 NOV2001–Chemical Compositions of SAE Carbon Steels * SAE J404 JUN2000–Chemical Compositions of SAE Alloy Steels SAE J409 FEB1995–Product Analysis-Permissible Variations from Specified Chemical Analysis of a Heat or Cast of Steel SAE J411 SEP1997–Carbon and Alloy Steels SAE J412 OCT1995–General Characteristics and Heat Treatments of Steels * SAE J413 FEB2002–Mechanical Properties of Heat Treated Wrought Steels SAE J415 JUL1995–Definition of Heat Treating Terms * SAE J450 FEB2002–Use of Terms Yield Strength and Yield Point * SAE J935 FEB2002–High-Strength Carbon and Alloy Die Drawn Steels * SAE J1081 NOV2000–Potential Standard Steels * SAE J1249 JUN2000–Former SAE Standard and Former SAE EX-Steels
SAE J1397 MAY1992–Estimated Mechanical Properties and Machinability of Steel Bars * SAE J1442 SEP2003–High-Strength, Hot-Rolled Steel Bars SAE J2281 MAY1997–Selecting and Specifying Hot-Rolled Steel Bar Products 2.3 Carbon and Alloy Steel Hardenability SAE J406 MAY1998–Methods of Determining Hardenability of Steels SAE J1268 MAY1995–Hardenability Bands for Carbon and Alloy H Steels SAE J1868 SEP1993–Restricted Hardenability Bands for Selected Alloy Steels SAE J1975 NOV1997–Case Hardenability of Carburized Steels 2.4 Sheet and Strip Steel SAE J126 JUN1986–Selecting and Specifying Hot and Cold Rolled Steel Sheet and Strip SAE J810 MAR1996–Classification of Common Surface Imperfections in Sheet Steel SAE J863 JUN1986–Methods for Determining Plastic Deformation in Sheet Metal Stampings SAE J911 MAR1998–Surface Roughness and Peak Count Measurement of Cold-Rolled Steel Sheet SAE J940 OCT1994–Glossary of Carbon Steel Sheet and Strip Terms SAE J1058 DEC1999–Standard Sheet Steel Thickness and Tolerances SAE J1562 DEC1999–Selection of Zinc and Zinc-Alloy (Hot-Dipped and Electrodeposited) Coated Steel Sheet
SAE Ferrous Materials Standards Manual 2004 Edition
Table of Contents:
+ indicates New Report; * indicates Technical Revision
* SAE J1392 FEB2001–Steel, High Strength, Hot Rolled Sheet and Strip, Cold Rolled Sheet, and Coated Sheet SAE J2329 MAY1997–Categorization and Properties of Low-Carbon Automotive Sheet Steels SAE J2340 OCT1999–Categorization and Properties of Dent Resistant, High Strength, and Ultra High Strength Automotive Sheet Steel + SAE J2375 AUG1997–The Selection of Adhesives for the Attachment of Exterior Aftermarket Accessories 2.5 Corrosion Resistant Steels SAE J405 JUN1998–Chemical Compositions of SAE Wrought Stainless Steels 2.6 Automotive Iron and Steel Castings * SAE J431 DEC2000–Automotive Gray Iron Castings * SAE J434 FEB2004–Automotive Ductile (Nodular) Iron Castings * SAE J435 OCT2002–Automotive Steel Castings 2.7 Tool Materials SAE J437a APR1970–Selection and Heat Treatment of Tool and Die Steels SAE J438b MAY1970–Tool and Die Steels SAE J439a FEB1977–Sintered Carbide Tools SAE J1072 FEB1977–Sintered Tool Materials 2.8 Spring Wire ASTM A227/A 227M-99–Standard Specification for Steel Wire, Cold- Drawn for Mechanical Springs * ASTM A228/A 228M-02–Standard Specification for Steel Wire, Music Spring Quality ASTM A229/A 229M-99–Standard Specification for Steel Wire, Oil- Tempered for Mechanical Springs
ASTM A230/A 230M-99–Standard Specification for Steel Wire, Oil- Tempered Carbon Valve Spring Quality ASTM A232/A 232M-99–Standard Specification for Chromium- Vanadium Alloy Steel Valve Spring Quality Wire * ASTM A313/A 313M-03–Standard Specification for Stainless Steel Spring Wire * ASTM A401/A 401M-03–Standard Specification for Steel Wire, Chromium-Silicon Alloy * ASTM A679/A 679M-00–Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn 2.9 Ferrous Powdered Metals SAE J471d AUG1973–Sintered Powdered Metal Parts: Ferrous 2.10 Elevated Temperature Properties of Ferrous Materials SAE J125 MAY1988–Elevated Temperature Properties of Cast Irons SAE J775 AUG1993–Engine Poppet Valve Information Report SAE J1682 SEP1993–Valve Guide Information Report SAE J1692 AUG1993–Valve Seat Insert Information Report SAE J2515 AUG1999–High Temperature Materials for Exhaust Manifolds 2.11 Abrasive Wear of Ferrous Metals SAE J965 AUG1966–Abrasive Wear 2.12 Test Procedures * ASTM A751-01–Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products * ASTM E8-03–Standard Test Methods for Tension Testing of Metallic Materials * ASTM E45-97 (Reapproved 2002)– Standard Test Methods for Determining the Inclusion Content of Steel
SAE Ferrous Materials Standards Manual 2004 Edition
+ indicates New Report; * indicates Technical Revision
ASTM E112-96–Standard Test Methods for Determining Average Grain Size * ASTM E140-02–Standard Hardness Conversion Tables for Metals * ASTM E1077-01–Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens * ASTM E1806-96 (Reapproved 2001)– Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition SAE J349 FEB1991–Detection of Surface Imperfections in Ferrous Rods, Bars, Tubes, and Wires SAE J358 FEB1991–Nondestructive Tests SAE J359 FEB1991–lnfrared Testing SAE J417 DEC1983–Hardness Tests and Hardness Number Conversions [See also ASTM E140-02£1] SAE J419 DEC1983–Methods of Measuring Decarburization [See also ASTM E1077-01] SAE J420 MAR1991–Magnetic Particle Inspection SAE J422 DEC1983–Microscopic Determination of Inclusions in Steels [See also ASTM E45-97 (Reapproved 2002)] SAE J423 FEB1998–Methods of Measuring Case Depth SAE J425 MAR1991–Electromagnetic Testing by Eddy Current Methods SAE J426 MAR1991–Liquid Penetrant Test Methods
SAE J427 MAR1991–Penetrating Radiation Inspection SAE J428 MAR1991–Ultrasonic Inspection SAE J864 MAY1993–Surface Hardness Testing with Files SAE J1242 MAR1991–Acoustic Emission Test Methods SAE J1267 DEC1988–Leakage Testing 2.13 Rollover and Falling Object Protective Structures * SAE J1119 SEP2002–Steel Products for Rollover Protective Structures (ROPS) and Falling Object Protective Structures (FOPS)3. Key Word Index4. Examples of Related SAE Technical Papers
Find the technical resources that you need at sae.org/standards
SAE Ferrous Materials Standards Manual 2004 Edition
+ indicates New Report; * indicates Technical Revision
