SA Mechanical Engineer Feb 12

THE SOUTH AFRICAN MECHANICAL ENGINEER VOL 62 February 2012 1

www.cbz.co.za

2 THE SOUTH AFRICAN MECHANICAL ENGINEER VOL 62 February 2012

Objet Eden Family

Objet Desktop Family Objet Connex Family

The Power to Create

www.objet.com [email protected]

Objet Blog

Can you believe this came out of a printer?

Yes, this entire hair brush, was produced in a single print job on the Objet Connex multi-material 3D printer.Objet’s 3D printing systems give designers, engineers and manufacturers the power to rapidly create functional prototypes straight from a CAD or 3D file. Using this technology you gain a true idea of how an intended product will look, feel and perform before it’s produced for real – saving your company both time and money. With Objet’s 3D printing systems you can more easily perfect your product designs and get them to market faster than ever before. Now that’s power! For more information on Objet’s 3D printing systems call 011 462 2990

......................................................................................................................................................................................................................

OBjeT – The Innovation Leader in 3D Printing for Rapid Prototyping and Additive Manufacturing

011 462 [email protected]

http://www.objet.com

mailto:[email protected]


http://www.demaplastech.co.za


AN ENGINEER’S VIEW

Chris ReayChairman of the Working

Committee: Communications(SA Institution of Mechanical

Engineering)

One can only conclude that it is politically driven distortion, nothing we do not now expect from the ANC government that has earned itself a dominant fail mark in

handling the country’s education system. Here’s the celebratory bit, ably enthused about by our Minister of Education.

“The overall matric pass rate for 2011 was 70%, up from 61% two years previously”. Compared with the previous year, there was a 40 % higher number of dropouts who did not write matric, thus enabling a higher percentage pass rate.

“The average mark for the maths paper was 29%, for physical science 32% and for life sciences 38% (after being adjusted up from 34.9%).” To obtain a final mark, Minister Umalusi adjusts some of the marks either up or down based on various statistical factors. Umalusi refuses to explain how this is done, claim-ing it is a highly complex, technical and qualitative process, and presumably, they conclude, is beyond the comprehension of the public to understand.

How low can you go?Unofficially, insider comment is that it is done because learners could lose bursaries, universities would scoff at the unadjusted grades, it could jeopardise those intending to study abroad, and it could prejudice those with good marks whose figures were not adjusted.

Overall, it is beyond reason that the acceptable pass rate for maths and science is 30%.One wonders if we can envisage how such low levels can produce candidates capable of mastering simple, daily nu-meracy let alone designing structures, undertaking complex medical operations and carrying out actuarial evaluations.

Such pass levels, however, are clearly sufficient to qualify to become politicians. For it was they who disbanded the Teachers Training Colleges which had historically provided a standard of teacher required

to understand the subjects they had to teach. It was they who decided after many expensive over-seas trips and conferences to introduce the OBE system against the advice of many countries and academics who had experience of it, if not for the simple reason that it only works in highly cognitively advanced environments. It was they who have now got the teachers’ trade unions into such a state of self protection and poor work ethic that is pervasive at public schools. All I can say is thank goodness for private institutions and parental involvement that are producing a high grade of students, albeit very small in real numbers.

It is imperative to address this alarming state of affairs by getting to the root cause of the problem: surely teacher quality and work ethic. Fudging numbers to give the veneer of success achieves nothing and in fact hides the reality that results in our current skills, unemployment and service delivery crises.

Get realInsofar as the feedstock to the engineering profes-sion is concerned, I was amazed at some recent edicts that we must draw on our rural communities (many serviced by under-provided schools) for our future engineering resources, clearly motivated by a strong dose of political correctness. When will this level of thinking which should know better about the challenges facing the professions that require a high standard of maths and science get real? It is imperative to draw their feedstock now from the top schools that produce the distinctions to keep the numbers flowing to the tertiary institutions.

The real issue is that SA is being steadily duped by a government that has evolved some sort of DNA that controls a process that achieves the lowest common denominator, not the highest common factor. Certainly this is not a formula for a com-petitive country.

Lowest Common Denominator?It has been interesting, if nothing else, to read the various news reports on the recent matriculation results. What they convey is that the Education Ministry

itself is not exactly a star performer in matters of mathematical interpretation or statistical determination. Celebrations have taken place to highlight certain so-called achievements that, when the numbers are studied in cold, hard reality, leave a seriously sub-standard and effectively deteriorating situation overall.

Beyond reason that the acceptable pass rate for maths and science is 30%


Atlas Copco Compressor Technique

P O Box 14110, Witfield 1467

Tel: (011) 821 9000, Fax: (011) 821 9106/7

E-Mail: [email protected]

www.atlascopco.com / www.atlascopco.co.za


http://www.atlascopco.com

http://www.atlascopco.co.za


Monthly Column9 Prominent Professionals

HVAC11 Hard-earned Experience

Pipes, Pumps & Valves13 Maintenance is Crucial15 Linking Design and Manufacturing

POWER GENERATION TODAY17 Mobile Traffic Control21 South African Ingenuity25 Power Generation News

Materials & Machine Tools27 Hard Work Pays Off

Produced by:PROMECH PUBLISHING,P O Box 373, Pinegowrie, 2123Republic of South AfricaTel: (011) 781-1401, Fax: (011) 781-1403Email: [email protected]: www.promech.co.zaManaging Editor Susan CustersEditor Kowie HammanAdvertising Mark BennettCirculation Catherine MacdivaDTP Zinobia Docrat/Donovan VadivaluDisclaimerPROMECH Publishing and The South African Institution of Mechanical Engineering as well as any other body do not take responsibility for the opinions expressed by individuals.Printed by: Typo Colour Printing, Tel: (011) 402-3468/9

Official Publication ofTHE SA INSTITUTION OF MECHANICAL ENGINEERINGand endorsed by:

CORROSION INSTITUTE OF SA SA PUMP MANUFACTURERS ASSOCIATION SA VALVE AND ACTUATORS MANUFACTURERS ASSOCIATION THE SA INSTITUTE OF TRIBOLOGY NUCLEAR INSTITUTE SA INSTITUTE FOR NON-DESTRUCTIVE TESTING NATIONAL SOCIETY OF BLACK ENGINEERS INSTITUTE FOR CERTIFICATED MECHANICAL AND ELECTRICAL ENGINEERS SOUTH AFRICAN ASSOCIATION OF CONSULTING ENGINEERS ASSOCIATION OF SOCIETIES FOR OCCUPATIONAL SAFETY AND HEALTH

Letter to the Editor30 Under-utilised

Compressors, Air Motors, Vacuum Pumps31 Streamlining Service Delivery33 Friction Free

Regulars3 An Engineer’s View

6 Institution News

8 SAINT

29 SAIT

36 Market Forum

Contents

The monthly circulation is 4 242

CopyrightAll rights reserved. No editorial matter published in “SA Mechani-cal Engineer” may be reproduced in any form or language without written permission of the publish-ers. While every effort is made to ensure accurate reproduction, the editor, authors, publishers and their employees or agents shall not be responsible or in any way liable for any errors, omissions or inaccuracies in the publication, whether arising from negligence or otherwise or for any consequences arising therefrom. The inclusion or exclusion of any product does not mean that the publisher or editorial board advocates or rejects its use either generally or in any particular field or fields.

February 2012 VOLUME 62 NUMBER 2

On the cover:Your partner for energy ef-ficiency and environmental technologies. Managing effective solutions, achieving targeted results for sustainable industries and environments.

Clyde BergemannTel: (011) 704-0580Fax: 086 734 0135

Email: [email protected] www.cbz.co.za


http://www.promech.co.za


http://www.cbz.co.za


Council 2011/2012

Office BearersPresident .......................... . . . . . . . . . . . . . . . . . . . . . . . . G Barbic (George)Vice President ............................ . . . . . . . . . . . . . . . ... D Findeis (Dirk)National Treasurer ............................... KK Nyangoni (Kudzai)

Branch ChairpersonsCentral ..................................... . . . . . . . . . . . . . . . . . M Cramer (Mike)Eastern Cape ................................................ W Rall (William)KwaZulu/Natal ................................................. J Moto (John)Mpumalanga Highveld.............................. L Odendaal (Louis)Western Cape ........................................... Dr D Blaine (Debbie)

Portfolios:Communications/Strategic Planning/Specialist Group..................................................CD Reay (Chris)Young Engineers Forum................Prof B Collier-Reed (Brandon)Education: Universities of Technology............... E Zawilska (Ewa)Membership .................................................... E Zawilska (Ewa)Professional Development Programme..........M Black (Malcolm)Technology Programme ................................. SZ Hrabar (Steve)To be confirmed....................................................A Roos (Andre)To be confirmed.........................................G Bartholomew (Bart)

Chief Executive Officer: Vaughan Rimbault

National Office Manager: Anisa Nanabhay

PO Box 511, Bruma, 2026

Tel: (011) 615-5660, Fax: (011) 388-5356

Email: [email protected]

Website: www.saimeche.org.za

Membership: Central, Eastern Cape, Mpumalanga & KZN:

[email protected]

Membership: Western Cape: [email protected]

Company Affiliates

Alstom Power Service SA

Babcock Africa Limited

Bateman Engineered Technologies

Bosch Projects

Fluor SA

GEA Air-cooled Systems

Hansen Transmissions SA

Hatch Africa

Howden Power

Howden Projects

Industrial Water Cooling

MBE Minerals (SA) (Pty) Ltd (previously KHD Humboldt Wedag SA)

Megchem Eng & Drafting Services

THE SA INSTITUTION OF MECHANICAL ENGINEERING

Osborn Engineered Products SA

Rotek Engineering

RSD a division of DCD-Dorbyl

S.A.M.E Water

Sasol Technologies

SEW Eurodrive

Siemens

SNC-Lavalin SA

Spicer Axle SA

Spirax Sarco SA

Thyssenkrupp Engineering

Transvaal Pressed Nuts & Bolts

Ultra-Flow Engineering Services

Vital Engineering

Weir Minerals Africa

Winder Controls

At the top of my wish list is to see more SAIMechE members using

the SAIMechE web plat-form for their own benefit. I hope to see members f inding employment through the site’s career section, and for other members to earn place-ment and referral fees. I hope to see members selling their intellectual property through the site, in electronic formats such as PDFs, spreadsheets, videos, audio files. I hope to see members launching successful newsletters for paying subscribers. All these good things are available to all members at no charge - just some effort on their part.

I hope SAIMechE will launch the Professional Development Programme (PDP) in 2012, aimed at providing a structured framework within which Candidates can develop towards professional registration.

I wish for some meaningful progress in the identi-fication of engineering work, and that those who have been trying to get this issue resolved for the past decade will step aside and make way for others to have a try.

Finally, I wish for a significant South African com-pany to become the Patron of SAIMechE, and to support our efforts at developing the Mechanical Engineering profession in South Africa.

Oh yes, I am also wishing for a 4-week surfing holiday in Hawaii.

Until then, it’s shoulder to the wheel. Have fun.

Vaughan Rimbault, SAIMechE CEO

Message from the CEO

Compliments of the season to you all. I trust you have survived another silly

season, and by now you are probably back in the swing of things and looking forward

to the year ahead. That’s where I find myself and so I thought I would share my wish list with you concerning some of the bigger SAIMechE issues which I hope will

see some action in 2012.

Vaughan Rimbault


http://www.saimeche.org.za




THE SA INSTITUTION OF MECHANICAL ENGINEERING

Why SAIMechE should be your company’s preferred training partnerSouth African industry and the engineering fraternity are experiencing advertising overload of technical training offered by local and international confer-ence organisers. Catchy layouts and fancy graphics are employed to attract customers. So why choose SAIMechE as your preferred mechanical engineer-ing training partner? Well, the reasons why are:

• We strive for development and presentationconsistency, whereby tried and tested training methods are used. (We’ve set a transfer of infor-mation standard to which our workshop material developers are required to adhere).

• Ourpricesarecompetitiveagainstthoseofmanycommercial conference organisations.

• SAIMechEmembersmayclaima20%delegatefee reduction on all training events.

• SAIMechE members may apply to developand present workshops for which they are fairly remunerated.

• AllworkshopsareavailabletobeheldIn-Houseat a discount rate.

• Weendeavourtopresentatailormadework-shop that best suits the client’s needs.

• Weuseconcise,no-frillspromotionalinforma-tion of events offered.

• Theefficiencyofouradministrationisconsis-tent, friendly and reliable.

Now, you know why using SAIMechE, your 120 year old mechanical engineering custodian body, as your short course training supplier is a great choice! You can view a comprehensive list of avail-able workshops by following ‘Training Events’ on www.saimeche.org.za.

2012 Scheduled Workshops – March to SeptemberNational Events Department - Tel. (031) 764-7136

Enquiries, Registration & Accounts: Carey Evans, National Events Administrator, E-mail - [email protected] Workshop Bookings/ Event Planning & Speaker Recruitment: Linda Robinson, National Events Manager,

Email - [email protected]

Event Code Title Date - Start Date - End RegionA2212 Lean Manufacturing 28-February 2012 1 Mar 12 Durban

B2312 Emergency Planning for Evacuation 7 March 2012 7 March 2012 Port Elizabeth

E2312 Emergency Planning for Evacuation 14 March 2012 14 March 2012 East Rand

A6112 Leadership and Management Principles & Practice 14 March 2012 15 March 2012 Durban

E2212 Lean Manufacturing 27 March 2012 29 March 2012 East Rand

K2312 Emergency Planning for Evacuation 28 March 2012 28 March 2012 Free State

B6112 Leadership and Management Principles & Practice 11 April 2012 12 April 2012 Port Elizabeth

C2212 Lean Manufacturing 1 May 2012 3 May 2012 Cape Town

F6112 Leadership and Management Principles & Practice 2 May 2012 3 May 2012 Secunda

A2412 Predictive & Preventive Maintenance Best Practice 8 May 2012 8 May 2012 Durban

F2412 Predictive & Preventive Maintenance Best Practice 15 May 2012 15 May 2012 Secunda

C6112 Leadership and Management Principles & Practice 23 May 2012 24 May 2012 Cape Town

B2212 Lean Manufacturing 29 May 2012 31 May 2012 Port Elizabeth

KHY12 Hydraulics Seminar Seminar 30 May 2012 30 May 2012 Free State

C2412 Predictive & Preventive Maintenance Best Practice Workshop 5 Jun 2012 5 Jun 2012 Cape Town

AWF12 Welding & Fabrication Seminar 6 Jun 2012 7 Jun 2012 Durban

B2412 Predictive & Preventive Maintenance Best Practice Workshop 12 Jun 2012 12 Jun 2012 Port Elizabeth

E2512 Effective Management Roles Workshop 13 Jun 2012 12 Jun 2012 East Rand

K2412 Predictive & Preventive Maintenance Best Practice Workshop 19 Jun 2012 19 Jun 2012 Bloemfontein

CWF12 Welding & Fabrication Seminar 20 Jun 2012 21 Jun 2012 Cape Town

E2412 Predictive & Preventive Maintenance Best Practice Workshop 21 Jun 2012 21 Jun 2012 East Rand

FWF12 Welding & Fabrication Seminar 27 Jun 2012 28 Jun 2012 Secunda

A2512 Effective Management Roles Workshop 4 Jul 2012 4 Jul 2012 Durban

BWF12 Welding & Fabrication Seminar 11 Jul 2012 12 Jul 2012 Port Elizabeth

EWF12 Welding & Fabrication Seminar 18 Jul 2012 19 Jul 2012 East Rand

KWF12 Welding & Fabrication Seminar 25 Jul 2012 26 Jul 2012 Bloemfontein

B2512 Effective Management Roles Workshop 1 Aug 2012 1 Aug 2012 Port Elizabeth

F2512 Effective Management Roles Workshop 15 Aug 2012 15 Aug 2012 Secunda

C2512 Effective Management Roles Workshop 12 Sep 2012 12 Sep 2012 Cape Town

http://www.saimeche.org.za




SAINT

During 2011, SAINT mentioned the stag-ing of the 18th WCNDT in Durban from 16 to 20 April 2012 in 4 issues of this magazine. Now that 2012 has arrived,

SAINT would like to give the final figures to the engineering industry thereby whetting their appetite and encouraging them to attend.

The facts for the event are as follows:

• 120 companies involved in the NDT field, either as equipment or service providers have purchased exhibition space. The exhibition cov-ers a surface area of around 9500 m2, which is approximately the size of a rugby field. In this exhibition the NDT industry is showcasing the state-of-the-art NDT technology to the world. What an opportunity to have such an exhibition in our country; what a privilege to be able to communicate with the major players in the field of NDT on our doorsteps. Please make use of this opportunity by attending the conference.

• 5 plenary speakers and 25 overview speakers have accepted the invitation to present the state-of-the-technology to the international NDT community. These lectures will have as a purpose the outlining of the NDT industry in the various technologies. Everyone will learn from these papers.

• 520 papers will be read in 8 parallel sessions, or will be presented in the form of posters, which will give the opportunity for one-on-one discus-sions. Here the industry communicates regarding developments which are on the go. Please make use of this unique opportunity to become aware of the latest developments.

• A number of discussion sessions and podium discussions have been scheduled on topics of interest to various sectors in the industry.

• The programme has been submitted to SAIMechE for the awarding of CPD points for attendees, who need to gain the points for 2012. Please make this the event to gain at least 3 of the CPD points for 2012.

As can be seen this will be a world class event. Please make use of the opportunity to become conversant in NDT and to be part of this presti-gious event. Such an opportunity will not come to South Africa again in our lifetime. All information is available on www.wcndt2012.org.za.

Dr. Manfred JohannesPresident SAINT

All systems go for the 18th World Conference on Non-Destructive Testing

(WCNDT) in Durban during April this year.

All Systems Go

http://www.wcndt2012.org.za

www.chemsystems.co.za

www.ceccato-compressors.com


MONTHLY COLUMN

Mathau Botsane Pr.Eng, Senior Engineer

Academic

SchoolHigh School in Virginia in the Free State

Graduate studiesMechanical Engineering at Wits University

Post-GraduateMBL through Unisa; Post-graduate diploma in Mining Engineering at Unisa

Professional BodiesSouth African Institution of Mechanical Engineering; ECSA registered; serve on ECSA QEC committee member; Mem-ber of the accreditation committee for Universities.

Career Path - First employerAnglo Coal at open cast mine in Vereeniging

Growth pathAnglo Coal; Sasol Mining, from foreman to section engineer; Goldfields Mine; Exxaro as engineering manager; Anglo Platinum as engineering manager; Murray & Roberts.

Present employer & positionMurray & Roberts – senior engineer

Achievements

A projectTo develop a multi-billion rand mine right from the Green-field stage through to an operating concern requires a broad knowledge of all the various engineering technologies and is a very satisfying achievement. Using engineering method-ologies, you have to design an entire mine into a workable solution which has to be constructible.

Future – a concept, a dream or a wishIt’s been a passion for quite a long time to play a role in the development of fully automated mining. Traditionally, and even today, the mining industry does not portray a technology-rich model which attracts intelligent young people. This is a mindset which should change. There are so many opportunities to employ advanced technologies to optimise the mining processes. The technologies are there, we must

Prominent Professionalsjust integrate them so that the mines of the future are fully automated. The wealth of Africa is underground, but we must exploit this cost effectively.

Projects

Most challenging and rewardingAlthough designing a new mine pro-vides an opportunity to implement new technologies and improve on old ones, the challenge lies in getting it all right at the design stage. It requires diligence, experience and good judge-ment to integrate the various elements of mechanical engineering to make it feasible and workable. It’s basically a complex problem-solving exercise.

Commentary

Are there shortcomings in the Mechanical Engineering Industry in South Africa?One major shortcoming in terms of mechanical engineering is that the public only hears about us when failures of sig-nificant multitude happen. The perception is we’re only there to fix failures because we’re responsible for them anyway. We as mechanical engineers should be more proactive and do much more marketing of the profession in the eyes of society and the general public.

How would you mend this?Mechanical engineers should start getting out there to market the things we do. Take the Gautrain and World Cup projects, for instance. The engineers never came forward and boasted, this is what we’ve done to bring these great projects to realisation. Had it not gone well, the engineers would have had to explain why.

Message to young engineersLooking at the African continent in terms of engineering, there is a lot of room for improvement. The young engineers of today will have to take it to the high end. They’re flex-ible, dynamic, think fast and are much more daring. It is dependent on them to take it further, create a balance and shape the future of the engineering profession.

Mathau Botsane

www.pps.co.za

10 THE SOUTH AFRICAN MECHANICAL ENGINEER VOL 62 February 2012 ZEST Electric Ghana LimitedCAPE

Passion Through Our People

0861 00 ZEST | www.zest.co.za

Cora

lynne

&Ass

oci

ate

s+27

(011

)422

1949

http://www.zest.co.za


The standard, simplest roots blower we manufacture is a low pressure machine usually with pressures below one bar

HVAC

SA Mechanical Engineer” speaks to Brian Volk of PHC Projects in Midrand, a company specialising in the design and manufacture of process air, vacuum, refrigeration and indus-

trial cooling & heating solutions. “When business tapered down a bit on the industrial cooling side we started getting more involved in waste water treatment in terms of aeration blower system design and manufacture,” he says. “This machinery be-ing very similar to gas recovery systems naturally led to us getting involved in this aspect of blower technology and applications.

Roots blowers“The standard, simplest roots blower we manufacture is a low pressure machine usually with pressures below one bar used in the aeration of sewerage or mine flotation cell applications,” Brian explains. “Although the principles are simple, each applica-tion has to be treated individually and the system designed accordingly to achieve optimum efficiency.”

The basic blower is imported and then custom-built to each application in terms of duty, frame structure, acoustic requirements and control sys-tems. “Our most recent large order was seven roots blower units for a waste water treatment plant in Namibia,” Brian elaborates. “The client wanted the units built into acoustic enclosures so we had to change the configuration to fit into space available. Instead of the silencers being fitted vertically as is usually the case, we configured them horizontally. Additional cooling fans were then mounted into the enclosure structure.

“Prior to fulfilling this order we had manufactured similar units in acoustic enclosures, but on a much larger scale, for a mining flotation cell application” Brian adds. “Driven by 200 kW motors they are the biggest we’ve built, in fact, we had to do the final fitting into the enclosures outside our workshop due to their sheer size.”

Gas recoveryBased on the same basic principle, but with ad-

ditional components such as heat exchangers and a cooling tower making up part of the gas and air flow circuit, Brian recently designed and built a skid mounted gas recovery system. “The client wanted to take the gas off a diesel powered furnace, compress it, cool it and use it in other processes in order to save on certain chemicals,” explains Brian. “The CO2

recovered from the outlet gas is then used to complement one of the chemical processes on their production line.

“From the gas discharge of the furnace, the gas enters the unit through a finned coil heat exchanger which is cooled from a dedicated cooling tower, then flows through a liquid ring blower and into a separator vessel from where it goes to the point of use,” explains Brian. “This is a system we designed from scratch, specific for this application, complete with flow meter and control system. It was a steep learning curve, but now we have yet another solution

Hard-earned Experience

An industrial blower could range from a straightforward roots blower through to highly-sophisticated turbo

compressors, each with its own technology suitable for specific applications.

Blowers built into accoustic enclosures

Brian Volk of PHC Projects


to offer the South African industry.”

Turbo blowersOn an even bigger scale, for large waste water treatment plants, PHC is now an agent in South Africa for the more sophisticated, higher capacity blowers made by HWT, Howden Water Technology, a joint venture company of Howden International formed specifically to serve the water treatment industry internationally. “Originally this turbo blower was built by Howden for the petrochemical industry, but it proved to be too costly for the water treatment industry,” explains Brian. “HWT took the basic machine, removed all the sophistication not needed for water treatment applications and

The standard, simplest roots blower manufactured is a low pressure machine usually with pressures below one bar

came up with a more affordable turbo compressor for this industry.

“In essence we now have a simpler, more affordable machine. Several similar machines are in operation at various sites around the country.” Brian adds. “It’s a highly-efficient machine which allows us to offer a comprehensive range of solutions to all sizes of water treatment plants in the sewerage and mining industries.”

At the heart of this range of single stage turbo compressors is the impeller design. “The integration of an overhung high efficiency impeller, precision gears and high stability bearings results in smooth, minimum power loss transmission,” explains Brian. “It is fitted with a pressurised oil lubrication sys-tem with high integrity protection which ensures maximum reliability and hence availability of the equipment.

ApplicationsApart from providing aeration for the treatment of industrial effluent, these blowers can be used in the petrochemical industry as air blowers for sulphur recovery, providing reaction air for the catalytic recovery of sulphur, in sulphuric acid plants as combustion air blowers and in the flue gas desulphurisation process as oxidation air blowers associated with the cleaning of flue gases produced within power and heavy industry.

They’re also used as air suppliers in furnaces, smelters and reactors, as process gas and fuel gas blowers as well as air blowers associated with biochemical fermentation in the pharmaceutical and the yeast production industries.

“We’ve been in this market for the past five years and now have the right products to offer a com-prehensive service to a wide range of industries in South Africa,” Brian concludes. “Apart from our wide range of standard machinery, we’re able to design and build specialised solutions while continuously striving for optimum efficiency.”

Brian Volk, PHC Projects, Tel: (011) 805-5221, Email: [email protected]

HVAC

A comprehensive range of solutions to all sized water treatment plants in the sewerage and mining industries

PIPES, PUMPS & VALVES


www.airconduct.com


SA Mechanical Engineer” visits WPS (Water-pump Services) in Pretoria north, a company which, among many other pump applications, specialises in waste water treatment pump

repairs and installation.

Aged equipment“The company has been around since 1980, focus-sing mainly on sewerage works at municipalities, fresh water plants and waste water treatment plants at mines right across South Africa,” says manager Riaan Seegers. “Across the board, the main problem which leads to waste water plants bursting at the seams can be ascribed to aged piping and pump equipment which has not been maintained properly for extended periods of time.

“At many of the pump houses we get called out to inspect, we find that it’s not really a case of increased capacity causing overflow, but rather pumps which are sometimes over sixty year old,” Riaan adds. “First off, there are no longer any spares available for these old pumps and secondly, they’re in a poor state having been neglected for years resulting in seals starting to leak all over the place while pipe work simply collapses due to severe corrosion.”

TheftAnother major problem which is not only affecting pump stations in the water treatment industry, but also farmers and other pump stations located in remote areas, is theft. “Many pump installations out in the bundu, away from any activity, are frequented by thieves even though they’re often housed in a pump house structure,” says Riaan. “The culprits break in and take everything, from the pump to the wiring and control panels. Not necessarily to sell as pumps, but purely to sell as scrap metal.

“Borehole pump installations are plagued with the same problem,” he adds. “Just in our immediate area around Pretoria North, and we’re not the only suppliers here, we’re doing around 10 to 15 borehole pump replacements a month due to theft. Sometimes thieves vandalise pump installations only to steal a piece of electric cable half a metre long.”

Products & ServicesWalking through the product display area at the

It’s not really a case of increased capacity, but rather pumps which are sometimes over sixty year old

Maintenance is CrucialThey say that after electricity, the next crisis looming is our

water supply. Much of the problem seems to stem from a dire lack of engineering skills in our municipalities exacerbated by

a distinct lack of maintenance.


Riaan Seegers of Water Pump Services

Before - An incoming pump at WPS


company’s premises in Hermanstad it becomes clear that WPS supplies just about any type of pump from all the major pump manufacturers around the world for all industry sectors. “Our scope of work includes the erection of sectional water tanks and tank stands, as well as repairs to

Problems with sufficient water pressure in high-rise buildings seem to be on the increase at several municipalities


After - A pump after its overhauled

A complete pump system built by WPS

all types of pumps and bio-filters for purification plant,” explains Riaan. “Apart from servicing a large client base of private borehole customers, numer-ous high rise buildings in Pretoria call on us for the maintenance and repair of their booster pumps and subterranean drainage pumps, including chiller pumps on air conditioning units. We also service pool pump units, filters, chlorine dosing units and water purification systems.”

New problemsProblems with sufficient water pressure in high-rise buildings seem to be on the increase at some municipalities. “Lately we’ve had several cases where the fresh water pressure is insufficient for the proper flow of water throughout the building,” explains Riaan. “We go out to investigate each case, but generally, installing a water storage tank fed by the municipal feed followed by taking it through a booster pump into the building, solves this problem.

“In some areas in Johannesburg, for instance, there are regular water cut-offs as old rusty pipes from the main supply burst. Buildings and factories are without water for several days while they repair the pipes,” adds Riaan. “Our custom-designed storage and booster system ensures enough water under pressure, a critical factor particularly when factories depend on constant water flow. One of our bigger installations is the provision of an 80 000 litre water storage solution to a shopping centre. Booster pumps supply all the tenants while keeping the fire extinguishing system under constant pressure.”

Pump selectionIn Riaan’s book, the key factor lies in selecting the right pump for an application. “You have to start off the selection process with as much informa-tion as possible about the application and what the customer expects from the pump system,” he says in conclusion.

“Selecting a pump which will run off its curve leads to cavitations, impeller damage and the overheating of the motor and bearings which in turn results in premature failure. Also, once the system is installed, the most critical factor for long pump life is regu-lar preventative maintenance, something grossly neglected in many pump stations.”

Riaan Seegers, WPS, Tel: (012) 377-0668/0407, Email: [email protected]


www.horne-group.com


As new developments in CNC machining come to the fore, so engineers can push the design frontier not only for new products but also by tweaking existing designs.

Refinements and even subtle changes can result in dramatic improvements in efficiencies.

Linking Design and Manufacturing

Engineering designers can push the envelope but, at the end of the day, it’s no use to anyone if it’s impractical to manufacture.

New pump rangeThis is essentially what happened in the development of a new range of VersaFlo vertical spindle pumps manufactured by Walter Meano Engineering (WME) in Germiston. “SA Mechanical Engineer” speaks to managing director of WME, Detlev Börner, about the new features of this popular mine dewatering pump. “The new design of the VSE series addresses the most common failures users have been experiencing in vertical spindle pumps,” he says.

“A while back, we were doing training at a workshop that was flooded with repairs on these pumps, we reviewed the basic design and realised there’s plenty of room to make improvements” Detlev adds. “That’s when we started the development of our own design, specifically to increase reliability and

reduce maintenance costs. With better machining technology at our disposal today we’re able to make design changes which simply weren’t possible or cost-effective in the past.”

Features The new range is represented by three main models, the VSE 50, VSE 80 and VSE 100, with the numbers indicating the diameter of the outlet of each model. “The VersaFlo VSE vertical spindle pump design was complemented strongly by our design experience over the past 30 years, gained with the well-known Pompie pump used on mines for decades. The same applies to the VPM air driven pump as well as the VPM electric vertical spindle pump,” Detlev says.

“The new design features a one-piece column with its bearings located closer to the impeller, Detlev Börner of Walter Meano Engineering at his design station

We started the development of our own design, specifically to increase reliability and reduce maintenance costs



The VSE series of electric spindle pumps

resulting in lower loads and a much longer life span. It also has a separate wear plate and inlet screen, resulting not only in reduced maintenance cost, but also easier maintenance.”

New tricksNormally on a vertical spindle pump the shaft would be contained in a protective housing. This is split halfway along the shaft to mount the bearing because the original designers of the shaft system did not want the lower bearing to be submerged with the volute of the pump.

“With new bearing and seal technology that al-lows for the submersion of this bearing, we could remove the flange arrangement halfway along the housing and put the bearing right down the bottom of the shaft,” says Detlev. “This not only provides more stability in the long shaft, but it’s easier to manufacture the housing and it will be easier to carry out maintenance on the bearing.

Engineering“Having a full engineering facility in-house provides us with the competitive advantage of always hav-

ing stock, built up when the engineering side of the business is quiet,” adds Detlev. “In addition to manufacturing submersible pumps, we also provide machining services in the light engineering field to OEMs in the mining, motor and defence industries.”

Although the new pumps look a lot like older designs and other makes on the market at face value, the changes have brought about a pump design with improved performance. “Although we have had to keep in mind that the basic components of the new range of pumps need to be interchangeable with existing designs in the market, we’ve been able to bring in unique features in our design,” explains Detlev.

“For example, the way we manufacture the spindle on a machining centre is unique. The fact that not many companies have this facility is probably the main reason it hasn’t been copied yet. Our competi-tive advantage lies in our human resource skills, CAD (computer-aided design) and computer-aided machining (CAM) software which allow us to utilise the full capability of our machines to produce high-quality products at competitive prices.”

SavingsThe first VPM-E vertical spindle pump design from WME was well received in the market a couple of years ago, but before long the mines started ask-ing for bigger pumps which prompted Detlev to extend the range while simultaneously improving the design. “The more electricity rates increase, the more viable it becomes to gain just 5 to 10 % on the actual efficiency on a pump and if you can simplify maintenance at the same time, it all adds up in the long run,” he says.

Detlev does all the design work himself, using SolidWorks 3D CAD software. “To exploit the full potential of modern CNC machining we’ve now invested in a flow analysis package from SolidWorks called Flow,” Detlev remarks in conclusion. “This will allow us to explore further improvements of our pump designs, particularly in terms of the efficiency of pump performance.”

Detlev Börner, Walter Meano Engineering, Tel: (011) 873-8620, Email: [email protected]

Although the new pumps look a lot like older designs, the changes have brought about a pump design with improved performance


Engineer PlacementsAre you looking for engineering resources?Consider the following:• A specialist service • Operated by Professional Engineers • That speak engineering language • Has a large, live local skills database• A network with access to scarce skills• Advanced searching for future needs

Contact us for a win-win [email protected]




PROMECH PUBLISHINGTel: (011) 781-1401Fax: (011) 781-1403Email: [email protected]: www.promech.co.zaManaging Editor: Susan CustersEditorial: Kowie Hamman, Eleanor SeggieAdvertising: Mark BennettCirculation: Catherine MacdivaDTP: Zinobia Docrat/ DonovanVadivaluDisclaimerPROMECH Publishing does not take responsibility for the opinions expressed by individuals.

CopyrightAll rights reserved. No editorial matter published in “Power Generation Today” may be reproduced in any form or language without written per-mission of the publishers. While every effort is made to ensure accurate reproduction, the editor, authors, publishers and their employees or agents shall not be responsible or in any way liable for any errors, omissions or inaccuracies in the publication, whether arising from negligence or otherwise or for any consequences aris-ing therefrom. The inclusion or exclusion of any product does not mean that the publisher or editorial board advocates or rejects its use either gener-ally or in any particular field or fields.

POWER GENERATION

TICK

ER T

APE

My first thought was what a great thing to take back to South Africa,” Pierre says excitedly. “Toying with the idea really

got me thinking which is when the idea of a mobile traffic light sprang to mind. These would be very handy when traffic lights go out, much better than a points-man,” he adds. “I made some sketches there and then, thought a lot more about it and when I got back to South Africa I had the drawings made up of how this battery-powered traffic light would be fitted onto the Chinese bicycle. The next step

was to patent the invention, a procedure which special patent attorneys in Pretoria formalised and carried out for us.”

Pierre is one of those fortunate people who not only invent new things, but can also make them himself in his workshop in Turffontein, south of downtown Johan-nesburg. “While waiting for the patent to be registered, we started building the first mobile traffic light onto the electric bicycle, now known as the Motralite,” he explains. “This one we painted in the colours and logo of EMPD (Ekurhuleni Metro Police Depart-ment) while the second one became JMPD for the Johannesburg police department.

How it works“We built the box housing the traffic lights, battery and control electronics, adapted a tripod to fit onto the side of the bicycle so

I had the drawings made up of how this battery-powered traffic light would be fitted onto the Chinese bicycle

Mobile Traffic Control

Pierre Sanan is a thinker, not in a philosophical way, but rather in a mechanical way. He invents a thing, patents it and then produces it as a South African product. Not too long ago he visited China and while sipping his first morning cuppa in a shop overlooking a busy intersection, he spotted Chinese traffic cops one after the other zipping through the congested intersection on

an electric bicycle to get to work.

An umbrella body, provisionally called the SA Renewable Energy Council, will be launched by four industry-related associations to act as a voice for the renewable energy industry in South Africa

The volume of electricity consumed in SA grew by 0.2% (48 Gigawatt-hours) year on year (y/y) in November, and electricity for the first eleven months of 2011 rose by 0.9% y/y, says Statistics SA.

The Department of Energy plans to centralise the regulation of the entire energy sector, including fuel and liquefied petroleum gas, under Nersa.

South Africa’s future energy mix envisioned in the IRP2 is putting the competitiveness of the coal industry in danger and is too ambitious for the local, vastly coal-dependent economy, says XMP Consulting senior coal analyst, Xavier Prevost.


http://www.promech.co.za


POWER GENERATIONTI

CKER

TA

PE

that it can either operate in situ on the bike, or be taken off and placed in an intersection to control traffic as any normal traffic light would do,” explains Pierre. “The traffic cop simply drives the bike into an intersection, lifts it onto its stand, raises the light up on the tripod and switches it on with a remote control. At first the lights in all directions flash red for a couple of seconds and then auto-matically switch into a normal sequence with the right-turning arrow being last.”

Pierre Sanan in his workshop with his patented mobile traffic control solution

Now that the mobile traffic light is patented, Pierre has already come up with more features such as a solar panel fitted on top of the light box, not only to charge the light’s battery, but also the bi-cycle’s battery. “At a recent traffic convention held in KwaZulu Natal we exhibited the bicycles and everyone, even a local traffic light manufacturer, loved the concept,” Pierre says. “Back in Joburg the municipality invited us over to demonstrate the bikes in their yard to a gathering of all their

A solar panel fitted on top of the light box, not only to charge the light’s battery, but also the bicycle’s battery

Eskom's generation division says that while it agrees with moves towards cleaner forms of energy, it will not do away with coal. Meanwhile, Numsa is calling for a socially-owned energy renewable sector to boost job creation.

Energy Minister Dipuo Peters said that foreign inves-tors are welcome to invest in South Africa's energy sector but they must bring their technology with them so local firms can adopt it.

Last year, the world market for wind turbines reached a total size of 41 GW, after 37,6 GW in 2010. Pre-liminary data by WWEA shows that total capacity worldwide has come close to 239 GW.

Irish developer Mainstream Renewable Power, that plans to spend R9.9-billion building 18 wind farms in South Africa over five years, is on track to build its first facility at Jeffreys Bay next year.


POWER GENERATION

traffic officers. So far reactions have been favourable and hopefully some orders will follow soon.”

Comfy seatingOne problem we envisage is that South Africans simply aren’t built like the Chinese and this little electric bike could very well take some strain or become quite uncomfortable under the weight of some of our traffic officers, so we asked Pierre about this. “The standard saddle is spring-loaded and quite comfortable, but if it becomes a problem, we’ll simply fit a bigger saddle,” he says with a chuckle. “However, we’re already negotiating with a Chinese manufacturer to also bring in an electric scooter which is a little bigger, has more power and has a wider seat than the bicycle.”

Pierre Sanan, Tel: (011) 683-8383, Email: [email protected]

The four-directional traffic light is powered by a battery, charged by a solar panel on top of the box

TICK

ER T

APE

California-based BrightSource and its partner Alstom will partner with Sasol to conduct a FEED study for a solar thermal power plant. Sasol will use the study to determine how best to deploy BrightSource's technology in the markets it serves.

Suzlon Energy, a global wind-power company based in India, is considering two possible manufacturing sites in SA. It has also been awarded a contract to supply 2,1MW turbines in the Eastern Cape.

The electric motor for the bicyle is built onto the hub of the rear wheel. Pierre’s tripod holder allows in situ operation or thelight can stand on its own

South Africans simply aren’t built like the Chinese and this little electric bike could very well take some strain


www.gemue.co.za


Created by:

RE

GIS

TE

R N

OW

FO

R F

RE

E E

NT

RY

www.terrapinn.com/powerafrica

Win an iPadTell us how you heard about the show...When registering as a visitor, enter the promo code “ADVERT 2” for your chance to win.

NB: all entries must attend the exhibition for a chance to win. Register online now at www.terrapinn.com/powerafrica and use promo code “ADVERT 2”.

Diamond partner: Gold sponsors:

Other sponsors & partners:

http://www.terrapinn.com/powerafrica

http://www.terrapinn.com/powerafrica


ENERGY EFFICIENCY

South African IngenuityIndustrial CategoryColgate Palmolive — a ten-year lighting programme has reduced energy consumption by 45% while increasing production by 100%.

Anglogold Ashanti — compressor and pipe optimisa-tion project leading to a saving of 5.2MW per year.

Residential CategorySolek — reduced demand from the grid by 450MW per year through solar water heating and photovol-taic project at Kleinmond low-cost housing project.

“Architect & Specificator” was delighted to attend annual Eskom’s eta Awards which, as usual, spawned some novel ideas.

Commercial CategoryPower Optimisa — optimising fluctuating and excess voltages led to savings of R105 523 per year at Woolworths Bridge store in Tyger Valley, Cape Town.

Woolworths — an automatic load transfer system switches off non-essential appliances such as geysers, lighting and airconditioning resulting in an annual saving of R8.366 million.

First National Bank — hailed as a green building

Colgate Palmolive, Roy Mwanzia AngloGold Ashanti, Jean Greyling Solek, Adriaan Rootman

Power Optimisa, Alan PalmerAnton Killian (left) of Woolworths and Craig Webb of UGU Engineering Solutions


First National Bank, left to right: Rajen Reddy, Willam Cass, and Riaan van Wyngaardt

Deborah Schuiling Funisile Zothe

in its day, the First Rand Office Park in Fairlands, Johannesburg underwent further interventions in lighting, water heating etc, to arrive at an annual saving of R7.5 million per annum.

Efficiency Champion: Community CategoryDeborah Schuiling — Ekanah House School started with 100 pupils in 1997 growing to 1 300 pupils today all of whom are educated in green principles, recycling litter from the community, while being schooled in a building with an indigenous garden, natural ventilation, water-less urinals etc.

Funisile Zothe — the driving force at Three Crowns Junior Secondary School in Lady Frere, Kavali village, eastern Cape, Funisile has introduced a worm farm, solar cooking,

Simon Grier

James Cruickshank Marlene Snowdon

ENERGY EFFICIENCY


Iweathar, Russell Witthuhn

Utillabs, Themba Gama and Paroshen Naidoo

Nicholas Nouwens

a typical low-income home.

Meinhard Fourie — designed a prototype of a pool pump achieving a saving of around 3Kw per day.

Utillabs — manufacturer of plug-and-play devices that fit into any three-pin plug socket and monitor/

Trevor McLachlan of Pick n Pay and Manie de Waal of Energy Partners

waste-water treatment, biogas facility and a wind/solar hybrid system at the school.

Efficiency Champion: Industry CategorySimon Grier — covered three roofs of their wine estate, Villiera Wines in the Stellenbosch with 539 solar modules capable of providing more than 132Kw of power per day.

James Cruickshank — champions energy-saving water heating at the Mediclinic private hospital group across the country saving R1.8 million per year.

Marlene Snowdon — as CEO and founder of Inti Solar, Marlene is rolling out solar water heaters to RDP homes across the country

Innovation CategoryIweathar — creator of an efficient vertical wind turbine for coastal regions producing around 500Kw of electricity per month, enough to power

ENERGY EFFICIENCY

Meinhard Fourie


Keegan Cordeiro

Teacher Susan McDonald with some of the learners from Greenwood Independent School

Shri Vishnu Primary

display a household’s energy consump-tion in real time.

Nicholas Nouwens — designed a mul-tiple cavity water heater system that subdivides a geyser into two cavities whereby the outside cavity insulates the interior one. Reduces heat losses by 30 to 40% and delivers up to 70% more hot water.

Energy Efficiency Awareness CategoryPick n Pay — an energy ‘dashboard’ is sent daily to store managers to enable active energy management and improve-ments to be tracked.

Young Designers CategoryKeegan Cordeiro (16 years old) — built a solar system that can charge a cellphone and run various small appliances.

Laura Andreas (16 years old) — has built a solar furnace that desalinates salt water and generates electricity.

Greenwood Independent School (Plettenburg Bay) — researched ways to improve RDP houses through better building orientation and insulation. They presented their findings to their local mayor.

Shri Vishnu Primary (Pietermaritzburg) — devised a solar cooker using an old satellite dish and CD’s which can boil two litres of water in 25 minutes.

Annamarie Murray, Tel: (011) 800-2847, Email: [email protected]

ENERGY EFFICIENCY

Laura Andreas



POWER GENERATION NEWS

Horne SA has secured the order for all soft-mounted rail fasteners to be in-stalled in the Kusile power station coal

Gantrail soft-mounted rail fastening system

Rail fasteners

Powertech IST Otokon was awarded the En-ergy Project of the Year at the Southern African Association for Energy Efficiency (SAEE) Awards. As the largest industrial Eskom DSM peak clip-ping project, Powertech IST Otokon’s compressed air project at Goldfields Driefontein had a peak clipping target of 12MW, but it has over-performed by 40% and resulted in avoiding 33t of CO2 emssions. These are only the contracted savings reported through the re-quired Measurement and Verification (M&V), and not the savings in their entirety.

The project encompasses an open architecture SCADA system controlling

Richard du Preez, programme manager receives Powertech IST Otokon’s Energy Project of the Year Award for 2011 from the Southern African Asso-ciation for Energy Efficiency (SAEE) Board Member, Dr Tsakani Mthombeni

Energy Project of the Year

compressor controls, all part of an inclusive design process that was followed with the client’s involvement to ensure the successful performance of the system. Goldfields are not only saving energy and the environment but due to the proper design, imple-mentation, measurement and verification of the project installation, the energy sav-ings will be sustained and not diluted over time.

Prof LJ Grobler, President of the SAEE comments, “It is not uncommon for energy efficiency projects to over-perform, especially if standards and M&V are applied to ensure that sav-ings aren’t only a one-off occurrence, but sustainable. The successful integration of various technologies at Drief-ontein highlights the fact that successful energy efficiency is a holistic approach that delivers performance figures as Powertech IST Otokon has proven here.”

SAEE, Tel: (041) 367-1041, Email: [email protected], www.saee.org.za

50 underground valves, instruments, PLC systems, compressor efficiency,

stockyard, currently under construction near Delmas, Mpumalanga.

The fasteners, to be supplied by Brit-

ish company Gantrail, will secure rail lines for the stockyard’s coal stacking and reclaiming machines. Horne is the authorised distributor in South Africa for Gantrail fastening systems. The multi-million rand order is the single biggest yet placed for Gantrail products in South Africa.

For Kusile’s stockyard, Gantrail will sup-ply rail fasteners from the manufactur-

ing facility in Gloucester, England. Supporting sole plates in four

different sizes will be manu-factured locally by Horne SA.

Horne’s group managing director, André du Preez, says

he is delighted with the large portion of the order that will be manufactured locally at the Spartan works. “The local manufacturing portion of the contract is important, and will supply useful work for our factory through to the May 2012 delivery date,” said du Preez.

Horne Group, André du Preez, Tel: (011) 974-1004, Fax: (011) 392-5650, E-mail: [email protected]

http://www.saee.org.za


The largest Awadukt Thermo ground-air heat exchanger system has been installed in Scotland at the newly refurbished and extended Banff and Buchan College in Fraserburgh.

The Rehau system draws air from out-side at a rate of 16000m³/hr through a 42m x 30m grid of Awadukt Thermo polypropylene pipework, 1.5m below the playing fields of the college. This

Ground-air heat exchanger

allows optimal heat transfer to take place between the ground and the air, resulting in the air being warmed by up to 9ºC in winter and cooled by as much as 14ºC in summer by the time it reaches the air handling unit (AHU).

This will have a significant impact on the energy loading of the AHU and will eliminate the requirement for refrigerant-based mechanical cooling to counter

the heat gain in the building generated by high occupancy levels and large amounts of glazing, particularly in the atrium.

Senior Mechanical Engineer, Alan Gibb from KJ Tait Engineers says: “On a sunny summer day when the external ambient temperature could be as high as 25ºC, the system will deliver air to cool the atrium which has been pre-cooled by the ground- air heat exchanger to around 10-11ºC using

Awadukt thermo pipe system

Book NOW for 2012

April• Computers in engineering• HVAC • Pipes, pumps and valves • Power Generation• Materials and Machine Tools

May • Power transmission• Steam, turbines and boilers• Filters and filtration• Power Generation

June• Bearings and lubrication• Computers in engineering• Pipes, pumps and valves• Power Generation• Materials and Machine Tools

Contact Mark Bennett on Tel: (011) 781-1401 or E-mail: [email protected]

for further details

POWER GENERATION NEWS

minimal amounts of energy and with almost zero running costs. For a building which has no mechanical cooling, this will be hugely rewarding.

KJ Tait will be monitoring the tempera-ture of the air entering the air handling unit via BMS readings as it evaluates the performance and payback of the Rehau Awadukt Thermo system over its first year in operation.

Rehau, Tel: (011) 201-1300, Sharecall: 0860 0REHAU, E-Mail: [email protected], www.rehau.co.za


http://www.rehau.co.za


www.kiravalves.co.za


Hard Work Pays Off

O ver 550 students (foundation level and 1st year apprentices) have been deployed at over 189 participating companies across six provinces, for

their on-the-job training (workplace training) phase.

The Toolmaking Association of SA’s (TASA) partnership with the Department of Trade and Industry (dti) into improving the sector’s future competitiveness position is gaining momentum. Two important milestones have

been accomplished in recent months.

Also, a national benchmarking exercise has been completed where 36 local companies were identified to be benchmarked against international competi-tiveness standards by the Fraunhofer Institute of the University of Aachen in Germany. Twenty two

of these companies were successfully benchmarked by end of September 2011.

This is a clear demonstration of industry’s commitment to be part of the solution in making an investment in their future.

The benchmark methodology focused on key enabling factors within companies such as business processes, resources, organisation, strategy and leadership and key company results such as financial results, customer service results and product results.

Key factsThe benchmarking results confirmed some key facts about the status of the South African TDM sector:

Hands on training at the NTIP's pre-apprenticeship programme

Students learn from experience and each other

• Local tooling companies have very little diversification into foreign markets

• Local tooling companies are less than 50% as profitable (sales per employee) as the best in class (international)

• Cash-flow on average per employee is only 17% of that of best in class

• Net income is on average 41% of best in class

• Value add per employee is on average only 32% of best in class

• Reinvestment rate (in new technology and equipment) is on average 33% of best in class

• Labour costs are less than half of best in class in Europe, but companies are failing to turn this to an advantage

• Top of class European tool rooms have 0% unskilled labour where local companies have on average 28% unskilled labour

• Local tooling companies spend only 30% of that spent by international companies on design

• The SA market mainly has the ca-

MATERIALS & MACHINE TOOLS


•Ontimedeliveryis managed in less than 50% of the time, where best in class achieves 80%

•ManySAtoolingcompanies have no marketing materials or websites

•Machineutilisation(eg, milling) less than 43% of best in class, creates the opportunity that SA tooling companies can drop their ma-chine rates if they increase utilisation, ie, second shift op-eration

•Underquotingisfrequently done in local business to stay busy

•Processandtoolsimulationtechnologyusageis only 30% against best in class

As a next stage to the benchmarking, the NTI with its regional and international partners, will develop interventions with the benchmarked companies to develop:

• Focus

• Supplymanagementsystems

• Technologyandknow-howdeployment

• Employeeskillssets,and

• Strategicmanagementcapacity.

TurnaroundThis is part of the interventions towards demon-strating the turnaround capabilities of the local tooling industry towards competitiveness.

A specific pilot partnership with the Gauteng Economic Propeller (GEP) will lead to the appli-cation of the above interventions in 10 Gauteng benchmarked companies to develop a "franchise" type model for SA tool room restructuring. GEP is investing R 1,6 million into this project through the Gauteng Tooling Initiative (GTI) and will be followed by similar partnerships in the other provinces.

Developing the sectorTASA is hereby demonstrating that the National Tooling Initiative (NTI), as a successful partner-ship between industry and government, has the key ingredients and capacity to develop the sector towards increased competitiveness in the medium to long term.

Robert Williamson, Tel: (021) 531-3138, Fax: (021) 531-5074, Email: [email protected]

Students work on one of the lathes at the South West Gauteng College

pacity to produce smaller less complex tools for which there is higher competition from Far East suppliers

MATERIALS & MACHINE TOOLS


www.smmh2012.co.za


T here are a number of different types of chains, all of which require lubrication in some way. It is known that 60% of chain failures are due to the lubricant or lubri-

cation system. It is therefore essential to use the right product for the right application in order to optimise chain life.

Wear occurs main-ly along the shaft - sleeve - roller contact points, which causes the chain to stretch. If stretching is excessive, gear meshing will be downgraded and increase stretching further. Stretching is acceptable when it is in the order of 1 to 3%.

The role of the lubricant is to de-crease wear on the chain but also to protect the chain from corrosion; re-duce transmission noise and improve transmission ef-ficiency.

The lubricant acts on the chain in the friction areas of the rotating parts, in the gaps between the main shafts, sleeves, rollers and links. It is in these gaps that the oil has to reduce the contact between the different moving parts. It is important for the lubri-cant to be able to penetrate between the links in order to lubricate the sleeve and the shaft.

There are a number of different types of wear mechanisms that occur, namely:

• Friction wear: Due to micro-welding causedby metal-to-metal contact and shear arising from friction.

Lubrication of Mechanical Chains

Steel chains are widely used in all types of industries because of the real advantages of this type of transmission system, which eliminate sliding, are flexible, are compact and have high transmission capacities.

A chain well maintained, will give efficiency around 98% due to the inherent low friction losses.

• Abrasivewear:Duetofrictionofabrasiveforeignparticles which penetrate the chain moving parts.

• Fretting:Whenrunningoveragearwheel,vibra-tion causes wear on the metal and micro-cracking if there is insufficient lubrication.

• Corrosivewear:Duetothecorrosiveeffectoftheenvironment followed by removal of this corrosion due to friction.

It is important to lubricate the chain components in the minimum chain load area, to allow the lu-bricant to penetrate.

CriticalSeveral types of products can be used for chain lubrication, depending on the type of chain and operating conditions. The oil should have sufficient fluidity to penetrate the internal surfaces of the link, sufficient thickness to maintain the oil film under a heavy load, sufficient adherence of greases to stick to the chain, good anti-corrosion properties and in some cases good temperature resistance.

In all instances, reducing friction reduces wear and minimises wasted energy lost in transmission. It is critical that the chain is sufficiently lubricated on a regular basis, with the correct lubricant to ensure that the high power transfer is maintained and energy consumption is reduced. The question is when last did you look at your chain lubrication strategy?

Thomas Surmon & John Fitton, SAIT Committee MembersGill Fuller, Tel: (011) 802-5145, [email protected]

SAIT



Under-utilisedWe have met, many years ago, most likely during my time with Mondi in Richards Bay, but I have also worked with Goldfields, SA Breweries, CG Smith Sugar, Richards Bay Minerals and finally Pöyry Southern Africa.

I read the September issue of ‘An Engineers View’ about ‘older’ engineers with interest and found it particularly pertinent to my situation.

At 56 years of age I am probably in what you describe as the ‘ centre of gravity of the (engineer-ing) skills’ yet I am for all intents and purposes, unemployed since my retrenchment at the end of 2008. Since my first job at Goldfields I gravitated towards Project Management and have managed major investments in the pulp & paper industry both locally and in Poland. My last job was in the position of MD of the South African office of one of the worlds largest engineering consulting companies.

I was retrenched when Executives in Helsinki decided to close the South African office due to

diminished investments in the local pulp and paper industry. I have applied for countless jobs and no-one can (or cares to take the trouble) to explain to me why I appear to be unemployable. I have an excellent track record, excellent refer-ences and feel so young and fit I could work ef-fectively until I am at least 70. Be assured that I am not only applying for top level positions, but all Project Manager jobs. I have sometimes won-dered if coming from a position of MD, somehow works to my disadvantage and I am sure that 56 is considered over the top.

Last year I started my own company, and have also done a little part-time consulting on project management, but all this activity falls way short of my aspirations and income requirements.

Your comment that “we are failing to utilise the experiential skills in a mentoring role for younger resources” is very true.

Kind regards

Derrick

LETTER TO THE EDITOR

Dear Chris

www.pumpsealserv.co.za

www.multialloys.co.za


COMPRESSORS, AIR MOTORS, VACUUM PUMPS

F illing out the job card is usually done in a hurry so the technician can get back on the road to the next job, resulting in a piece of paper which even the technician himself

can’t read afterwards. Now the service manager, usually days later, has to create an invoice and service record from an indecipherable job card.

Illegible reportsAllen Cockfield, MD of Artic Dryers decided to do something about it. He tells “SA Mechanical Engi-neer”: “We recently did a survey with our customers to find out how we can improve our services,” he explains. “A major issue across the board was the fact that customers could not read the handwriting of our technicians. So, over the past six months we’ve introduced a new system whereby our techni-cians are each issued with an internet-connected iPad tablet computer containing all the templates to complete service reports which are then sent back to our office immediately.

“We appointed an IT specialist who developed and implemented the system which not only benefits the customers, but our service manager can update

service data in the office just minutes after a job has been completed anywhere in South Africa,” Allen adds. “The service teams collect their job sheets for the day off the internet with complete details of the address, contact number and map of where the job is, ensuring there are now no excuses of getting lost between jobs.”

Instant reportingOnce the job is completed, the technician can take

Streamlining Service DeliveryOne of the most tedious tasks of any service crew is filling out job cards. This report is essential not only for

invoicing purposes, but also to provide a record, for both the service provider and the customer, of what’s been done.

Allen Cockfield of Artic Dryers

Artic supplies the full spectrum of compressed air drying requirements

Resulting in a piece of paper which even the technician himself can’t read afterwards



quicker, but technicians can also solve problems on site timeously because they can communicate ‘live’ with the service manager when encountering problems on site.

“For example, if the technician isn’t sure about what filter to use when replacing an old one, all he does is take a photo of the system, send it to the service manager via the internet and the problem is resolved within minutes. Aside from making our life easier, the customers’ major benefit is that they receive a comprehensive, legible report in electronic form which they can utilise for their own records. An added assurance is that the system is designed to automatically add any new capital equipment to a database we’ve built up for each one of our clients on our side.”

Clean airArtic supplies the full spectrum of compressed air drying requirements, from low to high quality drying and filtration to ultra dry air demands with desiccant rich low dew point chemical dryers. “In among this wide range of options we now also have a catalytic converter for compressed air systems where any oil contamination in the compressed air is converted into water,” says Allen. “This is very new on the market, used to attain 100% guaranteed pure oil-free air from an oil lubricated compressor. It can be installed at the compressor house, or as a de-centralised function closer to the point of use.

“Although filtration systems do remove most of the oil in a compressed air network, the catalytic converter will clean up the rest,” adds Allen. “The waste from filtration and dryers, all contain oily waste water which has to be managed to avoid environmental contamination. To solve this problem we offer the Sepura range of separators for the management of oily condensates drained from air systems.

“Condensate must be purified to strict legal levels before the water content from the condensate may be discharged into a drain,” concludes Allen. “Discharging of contaminated condensates not only damages the environment, but is now illegal and leaves operators and CEO’s open to substantial fines.”

Allen Cockfield, Artic Dryers International, Tel: (011) 425-3484, Email: [email protected]

pictures, or even 3 dimensional composite photos of the plant with the iPad to accompany the job sheet which is signed off on the tablet by the client. Says Allen, “The technician then simply hits the ‘send’ button and we have a complete report back in the office within seconds. The data is processed here to produce an invoice, a complete 3-page report with pictures and a signature to send back to the client within the hour.”

Artic offer multi-brand servicing, “As a result, our service teams are extremely busy and out on the road for several days at a time, which means we were getting the job cards days afterwards in some cases,” says Allen. “Now we not only invoice

Ensuring there are now no excuses of getting lost between jobs


www.verder.co.za


The claw technology used in the working chamber of the new vacuum pump from Elmo Rietschle is based on this principle where two claw-shaped rotors roll together very

closely but without actually touching, forming the compression chamber which causes the vacuum.

“SA Mechanical Engineer” visits the South African distributor of this equipment, Air & Vacuum Tech-nologies (A&VT) in Midrand, to speak to product specialist, Mark Burn, about the principle of these vacuum pumps now catching on widely locally. “Elmo Rietschle is a Gardner Denver company and the only manufacturer which makes a claw vacuum pump with a capacity of 1 000 cubic metres an hour,” he says. “We’ve now installed a number of these units with great success locally.”

Claw technologyThese claw pumps are oil-free and frictionless

Friction FreeThe less friction between the moving parts of machinery, the less energy required to move those parts. If the moving parts don’t touch each other at all, there is no friction and so no

energy usage.

These claw pumps are oil-free and frictionless reducing the energy requirements which would be needed for the same duty in other types of vacuum pumps


reducing the energy requirements which would be needed for the same duty in other types of vacuum pumps and low pressure compressors, quite dra-matically. Apart from energy savings, maintenance costs are reduced significantly as well. He adds, “We’ve just replaced old carbon vane-type, water-cooled vacuum pumps with these units. The blades on the old units, for example, used to break on a regular basis, adding to maintenance costs with vane replacements taking place about every six to eight months.”

To achieve the capacity of 1 000 cubic metres per hour for his operation, an A&VT client previously had to have two vane machines. These have now been replaced with one claw-type machine. “With the claw units there is no friction whatsoever, re-ducing this client’s running costs in terms of spare parts for regular blade replacements,” says Mark. “There are also no costs in oil or water because the claw pump runs completely dry and is air-cooled. Environmentally the air released from the system is cleaner and contains no carbon dust or oil vapour to contaminate the working environment.”

The principleThe dry running Elmo-Rietschle C-Series generates contact-free vacuum or compressed air efficiently and economically due to the principle of internal compression. Ross Sinclair, product manager at

A&VT explains, “This results in considerable energy savings compared with the tradi-tional rotary vane design.” The claws of the C-Series pump are an optimised, high

precision shape which roll together without making contact, made possible through the syn-chronisation of the rotors by a precision gear set.

Special seals separate the compression chamber and the gearbox to ensure there’s no oil in the chamber. The claw rotors control the transportation of the medium by opening and closing the inlet and outlet channels and, therefore, no sealing fluid is needed in the compression chamber.

From left: Ross Sinclair and Mark Burn of AV&T



A claw pump consists of two rotors (1 and 2). They turn in opposite directions in a compressor housing (7) without contact observing very tight clearances. They are synchronised via a precision gear. As the claw moves over the suction connection (3) and the axial suction channel inlet (4) the gas is sucked into the com-pression chamber.As the rotors revolve, the gas moves from the suction side to the pressure side. Then it is compressed by the reduction of the volume between the rotors until the lower rotor uncovers the discharge channel (5). This “internal compression” leads to high differential pressures at efficien-cies of more than 60 %. Afterwards the pre-compressed gas is discharged via the pressure connection (6). To remove the heat generated by the compression process, cooling air is sucked in between the compression housing (7) and a silencing cover (8) before it leaves the pump.

the gas is sucked into the compression chamber.

As the rotors revolve, the gas moves from the suc-tion side to the pressure side where it is then com-pressed by the reduction of the volume between the rotors until the lower rotor uncovers the discharge channel. This ‘internal compression’ leads to high differential pressures at efficiencies of more than 60 %. Afterwards the pre-compressed gas is dis-charged via a pressure connection. To remove the heat generated by the compression process, cooling air is sucked in between the compression housing and a silencing cover before it leaves the pump.

Wide selection choice“The C-VLR ZEPHYR Claw vacuum pump range come in capacities ranging from 60 to 1000 m³/h and maximum continuous vacuum up to 50 mbar,” Ross elaborates. “Our pump has a steady perfor-mance curve over the entire operating range. The integrated air cooling principle has proved to be

The dry running Elmo-Rietschle C-Series generates contact free vacuum or compressed air efficiently and economically

How it worksMuch like rotary vane and rotary lobe pumps, the claw compressors and vacuum pumps of the C-Series are based on a static compression system but unlike rotary lobes, compres-sion happens internally by volume contraction. A claw pump consists of two ro-tors which turn in opposite directions in a compressor housing without making contact by observing very tight clearances. They are synchronised via a set of precision gear so that as the claw moves over the suction con-nection and the axial suction channel inlet,

A claw pump consists of two rotors which turn in opposite directions in compressor housing without making contact


Several type of vacuum pumps for various applications


highly effective and no additional cooling is necessary. This range is also available with optional variable speed drive while Atex compliant versions are also available.” The C-KLR claw combination (vacuum/pressure) pumps are also available up to 140m³/h. This version has been well received in the printing industry and the C-DLR low pres-sure compressors also have a wide scope of uses.

“This technology has been around for a couple of years, is thoroughly proven in many installations across all industries in Europe, but is only now catching on lo-cally,” says Mark in conclusion. “Anyone considering upgrading old plant, be it vane technology or liquid ring vacuum technol-ogy, should take a serious look at switching to claw technology altogether. Besides the small footprint of a high capacity vacuum machine, there are so many advantages over the old technology which all translate into direct savings and consistent machine availability.”

Ross Sinclair, A&VT, Tel: (011) 318-3241/5, Email: [email protected], Website: www.vactech.co.za


http://www.vactech.co.za

www.schaeffler.com


MARKET FORUM

Going green Engen’s pursuit of a ‘greener’ bulk transport fleet and operation was boosted recently with the purchase of two environmentally-friendly vehicles from Scania.

According to Engen Transport operations manager, Llewellyn Snyman, the bulk transport vehicles both contain Euro 4 spec engines, which run on ADO 50 ppm diesel. They also sport exhaust gas recirculation and particulate filter technology which translates into fuel consumption savings.

“These are the first vehicles with reduced emissions technology to be owned by Engen. Not only do they offer great fuel consumption and advanced technology but they also have safety features such as driver airbags and pre-tension seat belts, which are unique in the market,” says Llewellyn.

These vehicles will be operating out of Engen’s Cape Town and Langlaagte terminals. Additional ‘green’ vehicles’ will be purchased in accordance with the company’s fleet replacement programme and roll-out of ADO 50ppm nationally.

“The Engen Transport Department will be monitor-ing the performance of these two vehicles and, pending their efficiency and sustainability, will pursue further roll-out,” says Llewellyn. With ADO 50ppm diesel being the future, investing in a ‘greener’ fleet is definitely a step in the right direction for the company and surety to sustainability.

Gavin Smith, Engen Petroleum Limited, Tel: (021) 403-4312, Email: [email protected]


www.afzelia.co.za


MARKET FORUM

An exclusive distribution agreement concluded with Australian manufacturer, AllightSykes, allows Barloworld Power to sell, rent and support the Sykes-branded pump range within its southern Africa territories.

From its production facilities in Australia and Dubai, Sykes has helped shape the world’s construction and mine de-watering market for more than 40 years. Core products in the Sykes line comprise the Contractors, HIMAX, and the Xtra pump ranges.

Much of Sykes’ success has stemmed from its priming systems, which improve fluid handling efficiencies and greatly reduce maintenance requirements. A

‘snore’ facility built into its ground-breaking auto-priming pumps means they can run dry without damage for extended periods.

Comments Barloworld Power assistant general manager, Graeme de Villiers, “AllightSykes’ diesel driven pump prod-ucts are powered by Cat engines and so the strategic alliance leverages off our clear synergies.

“For customers in South Africa and our other key territories, such as Zambia, Botswana, Namibia, Mozambique and Angola, it means Barloworld Power can provide a seamless after-sales support strategy alongside our allied Cat power solutions.”

On site at Barloworld Power’s facility in Boksburg, Gauteng are (from left to right) Graeme de Villiers, assistant general manager, Barloworld Power; and AllightSykes’ executive general manager for Africa, Peter Breen

Pump Leader

AllightSykes sales and marketing di-rector, Paul Sowerby, explains, “Most pumps in this corner of the de-watering market are imported and then retro-fitted with various technologies in a bid to help them cope with southern Africa’s notoriously tough operating environments,” he expands. “Having all the crucial components designed, engineered and then factory-fitted in Australia means the new Sykes MH300i reaches Barloworld Power ’s target markets tailor-made to make projects more efficient and productive.”

Theo Jooste, Barloworld Power, Tel: (011) 898-0450, E-mail: [email protected]

ABB has signed a five-year, ABB Full Service contract with Nampak Cor-rugated, to manage maintenance and improve overall efficiency at the com-pany’s Rosslyn Paper Mill in Pretoria. Under the agreement, ABB will manage all maintenance operations at the paper mill to improve equipment efficiency and increase production output while reducing operating costs. 62 Nampak maintenance employees transferred to ABB when the contract took effect on 1 December 2011.

The Rosslyn mill manufactures recycled

based paper for a variety of corrugated packaging products, supplied by Nam-pak’s Corrugated operations.

Under the agreement, ABB will manage all maintenance to improve productivity and equipment reliability at the mill, and retain and develop all existing main-tenance staff and management. ABB will train the staff in pulp and paper industry-specific predictive maintenance and management practices. In addition, ABB will provide process optimisation, energy consulting, equipment lifecycle services at the site, as well as manage all

third-party subcontractors and suppliers.

“We are not only looking forward to improved maintenance processes and practices, but the performance guar-antees will ensure the relationship is a true partnership with the parties working closely together to improve operations, and value is added in a much wider context than pure maintenance services”, says Christiaan Burmeister, managing director of Nampak Corrugated.ABB, Tamara Chetty, Tel: (010) 202-5093, Email: [email protected], www.abb.com

Wider context



www.abb.com


DRC-based Boss Mining SPRL has awarded FLSmidth four different orders for equipment at its copper operation in Kakanda in the Katanga Province of the Democratic Republic of Congo (DRC).

The bundled package comprises a mill contract and a gyratory crusher contract, both awarded in June 2011, and two contracts — for thickeners and flotation equipment respectively — signed in Sep-tember 2011. Most of the equipment is scheduled to be on site at Kakanda by the third quarter of 2012 with installa-tion starting before the end of this year leading into commissioning in 2013.

FLSmidth’s Terence Osborn says, “Our 22 foot diameter ball mill at Tenke Fungurume in the DRC copper belt is very similar to that required at Kakanda and a similar flow sheet comprising a gyratory crusher, grinding mills, flotation cells and thickeners is in operation at Lumwama.

“The mill required at Kakanda is specified for 11 000 kW of installed power, which requires a dual pinion drive. FLSmidth is the leader in this technology in the southern African market. We understand copper belt operations and have two full-time agents based in Northern Zambia

to support our customers in the region.”

Terence says apart from the obvious financial benefits, there are many other advantages to bundled packages. These include leveraging economies of scale and optimising project execution and on site resources.

“This means that we need deploy only two project managers to oversee the entire project package and only one multi-disciplinary crew will be on site for installation and commissioning,” he explains.

Marinda Kerr, FLSmidth, Tel: (010) 210-4820, Email: [email protected]

A single stage SAG mill with Krebs cyclones at a mine in Africa

MARKET FORUM

Bundled Package

First Cut has been awarded the sole distributorship rights in Southern Africa by Bystronic’s, says area and sales manager (South Africa), Phillip Burgener.

Bystronic has maintained a presence in South Africa since its inception in the late 1980’s but has increasingly felt that its potential for growth and market penetration was not being fully realised through its existing channels.

More Exposure

Phillip Burgener

“We had received a number of calls and emails from customers in South Africa recommending First Cut as a possible distributor of choice for our products. Based on the enthusiasm and feedback we received from these customer companies, we were motivated to contact First Cut to discuss the opportunities for both organisations,” says Phillip.

“Within a short space of time we decided to cement our relation-ship. Bystronic has an extensive range of laser and waterjet cutting solutions developed for a range of customers, from small job shops up to large engineering conglomerates. While the laser cutting equipment is already proving popular with a number of local customers, waterjet cutting technology has not been given the exposure it needs in the market. We have already implemented plans to increase customer awareness,” says Phillip.

Andrew Poole, First Cut, Tel: (011) 614-1112, Email: [email protected]


http://www.flsmidth.com



Hytec’s new DC Power Pack features pressure ratings of up to 250 bars, and is available in 12 and 24 volt variations

Hytec has broadened its range of mobile hydraulic components suitable for ap-plication in the mid-tier mobile and industrial market segments.

“The new range includes hand pumps, cartridge valves, hand control valves, selector valves, and DC power packs,” says Freddie Kühn, regional manager, Hytec. “What excites us is that all new technolo-gies offered are very competitively priced and provide trusted European engineering excellence.”

This extensive hydraulics product range is brought to the market through the Hytec Group network of 25 branches and distributors throughout southern Africa. The company has also invested in continuous staff training, aiming to ensure all customers get the best possible service from these branches.

Willem Gijzelaar, Hytec Holdings, Tel: (011) 979 4630, Fax: (011) 979 4635, E-mail: [email protected]

in a very short time frame,” he says. “In fact, manufacturing the 1 000 NB unit went very smoothly, because we had trialled and debugged the system while expediting the order for the 855 NB unit last year.”

Rene Calitz, Weir Minerals Africa (Pty) Ltd, Tel: (011) 929-2622, www.weirminerals.com

Weir Minerals Africa has just dispatched the biggest hose bend manufactured on the African continent — a 1 000 nominal bore (NB) hose weighing 1.4 ton and a mandrel weighing 1.4 ton — to a customer in Australia

MARKET FORUM

Hydraulics Systems

Topping Its Own Record

Weir Minerals Africa has just dispatched the biggest hose bend manufactured on the

African continent — a 1 000 nominal bore (NB) hose weighing 1.4 ton and a mandrel weighing 1.4 ton — to a customer in Australia and is currently working on an enquiry for an even bigger unit of 1 100 NB.

These orders follow the successful completion in 2010 of what was then the biggest hose bend to be produced on the continent, an 855 NB unit.

“Before we entered this market segment, there were only three suppliers in the world capable of manufacturing hose bends of this magnitude,” Weir Miner-als Africa’s Grant Ramsden, says. “We

recognised that demand was greater than supply and took a strategic deci-sion to develop the capacity to produce these units as an additional specialised product line.

“Tooling design has been carried out in-house by our engineering department in Isando and we’ve been fortunate enough to find an engineering company based in KwaZulu-Natal to manufacture the hose mandrel and the bend former for us.”

Grant adds that other challenges included the physical handling of the massively heavy hose bends and the manner of extracting the large mandrel from the cured product.

“In the end we devised a highly innova-tive solution for extracting the mandrel


http://www.weirminerals.com


“The demands of modern engineering make the choice of the right sealing product an important consideration, both in the design of new equipment and in selecting products to re-place those that are no longer suitable,” says Deidre le Roux, BMG’s seals division. “BMG’s range of gaskets, which is manufactured accord-ing to stringent quality controls, is designed for product conformance to specifications and uniformity that results in unvarying performance, even in demanding en-vironments.

“The definition of a seal has changed dramati-cally over the years and leakage measure-ments have advanced from drops per minute, to parts per million (1mg/kg = 1 part per million. This is the commonly used term to describe very small amounts of contaminants in the environment.

“The selection of the correct gasket for a specific sealing application involves consideration of variables present in a flanged connection. Traditionally, these factors include temperature, applica-

Included in BMG’s extensive range of sealing products are quality branded gaskets, designed for reliability, chemical and corrosion resistance, extended service life and easy installation

MARKET FORUM

Multotec is expanding extensively into other parts of the African continent — and beyond. The company recently established branches in Mozambique, Zambia and Ghana, with an agent in Zimbabwe, and Thomas Holtz, Multotec chief executive officer says business is “flourishing” in all these areas.

“Our growing branch infra-structure is help-ing us transition from pure equip-ment sales into the field service ma in t enance arena,” he says. “Today we’re in the business of delivering peace of mind — work-ing closely with our customers to provide condition monitoring and process optimisation services for the lifetime of the equipment we supply. We stand by our product and staying with it in the field, ensures it provides a maximum return on investment to our customers.

Multotec is also playing on an in-creasingly global platform, focusing on benchmarking its product offering against international leaders.

“For example, in an African context, several Australian companies are op-erating very successfully in our part of the world,” Thomas says. “We want to establish ourselves just as successfully in Australia in order to be able to pro-vide a reference base that proves our capabilities in the international arena.

“Although research and product develop-ment keeps our products state-of-the-art and able to hold their own against international competition, having local specialists takes time and money. This process has to be nurtured and built up from scratch to establish a local track record,” Thomas says.

“We’ve realised, however, that we need to operate very selectively in certain foreign markets, initially establishing critical mass. We can’t be all things in all markets, but we’re moving forward in a steady and promising fashion by leveraging the local model that is working so well for us.”

Bernadette Wilson, Multotec Group, Tel: (011) 923-6193, www.multotec.com

Thomas Holtz, Multotec Chief Executive Officer

Going Global

Maintaining the Seal

tion, media and pressure. Variables, like the flange metallurgy, bolt thread embedment, flange rotation, bolt stretch, additives to the media and the flange surface finish, now determine how well a gasket performs.”

Deidre le Roux, BMG, Tel: (031) 576-6254, Fax: 086 242 5973, www.bmgworld.net

Actom Electrical Machines has launched a new range of cast-iron medium voltage motors into the market that incorporates state-of-the-art technology, as well as world class electrical steel and insula-tion systems.

Developed by the company over the past few years, the new high specifica-tion range – dubbed the MS4 series – comprises totally-enclosed fan cooled (TEFC) motors in the 300 kW to 800 kW power range, with frame sizes of between 355 and 500 and voltages of 3,3 kV, 6,6 kV and 11 kV.

“The MS4 series represents a significant advance over the TEFC range of motors

High Spec Range

http://www.multotec.com

http://www.bmgworld.net


MARKET FORUM

we previously produced and sup-plied,” says Paul Lepora, Actom Electrical Machines’ commercial & marketing manager.

“The MS4’s, which are fully inter-changeable with our previous 1LA1 range, incorporate sound proofing systems that greatly reduce full load running noise levels, and new large format terminal boxes that facilitate ease of installation and reduce the risk of flashovers during operation.

Actom formerly traded under the name Alstom South Africa and re-branded to Actom in September 2009.

Paul Lepora, Actom Electrical Machines Tel (011) 899-1114 Fax (011) 899-1371E-mail [email protected]

Through the recent establishment of the four new SKF authorised distributors in Kwazulu Natal, Bear-

ing Services Africa has acquired SKF’s Durban, Pietermaritzburg, Mandini and Richards Bay branches. This is part of SKF’s ongoing commitment to deliver complete product and service solutions to the customer’s doorstep.

Discussing the objectives behind the distributor programme, SKF South Africa managing director, Barry Dailly, says that it is in line with the company’s 2008 strategic decision to restructure its South African branches and establish an authorised SKF distributor network. “SKF has over 100 years experience in bearing and rotating technology. We aim

From left to right: Robin Briggs - distributor development manager - SKF, Barry Everitt managing director - Bearing Services and Barry Dailly, manag-ing director, SKF South Africa

National Footprintto provide customers with added value across the board by delivering SKF’s core technologies - bearings and units, seals, lubrication systems, power transmission, mechatronics, and mechanical and reli-ability engineering services.

“However, because it is impossible for us to be everywhere, our authorised independent industrial distributors, who are an extension of our product and service delivery, give us the best route to market and enable us to place SKF appropriate resources and skills where they are required, in other words, equip our customers with SKF knowledge”.SKF South Africa (Pty) Ltd, Samantha Jou-bert, Tel: 011 821 3500 / Fax: 011 821 3501, [email protected], www.skf.co.za

Actom Electrical Machines’ Projects Manager Brian Lindsay with two of the new high specification MS4 series medium voltage motors now being produced by the company

Lifting

65 ton boilerJohnson Crane Hire (JCH) recently carried out two lifts to install a new coal fired boiler at Impala Platinum’s platinum refinery and production facility in Springs, on the East Rand, during a plant shutdown.

“Safety during this kind of opera-tion is of optimum importance,” says JCH’s Malcolm McNicholas. “That’s why at least 50% of the effort on a project like this goes into planning, taking in account factors such as the dimensions and details of the unit to be lifted, lift information, the geological conditions on site and any existing obstructions.”

The new boiler weighed in at 65 ton and the only possible position in the plant for the crane to be located was in the coal bunker area. As a result, Impala Platinum personnel had to move hundreds of tons of coal out of the area to a temporary storage site to clear the necessary space.

“The boiler arrived by road from Cape Town and, in order to enter the site, had to be lifted over a pipe bridge near the site entrance,” says Malcolm. At 5.3 metre high, the boiler would not pass underneath the bridge. “We were aware that this would be a requirement and we set up our crane in the first lift position near the pipe bridge. The boiler was lifted off the transport vehicle, over the top of the bridge and replaced back onto the vehicle to proceed closer to the final lift position. The crane then had to be dismantled and moved to the second lifting position.”

Johnson Crane Hire, Alison Dickson, Tel: (011) 455-9258, www.jch.co.za



http://www.skf.co.za

http://www.jch.co.za


MARKET FORUM

The submersible pump MS-T from Ritz Pumps does not have a continuous shafts and is therefore easily adapted to changing water levels and is extremely easy to maintain. The single suction submersible pumps they manufacture

Water Transfer

range from 30 m³/h up to 900 m³/h for heads up to 550 m, and are manu-factured in materials suitable for mine dewatering and acid mine dewatering.

The submersible MC-T mining motors are customised for the individual ap-plication and therefore last extremely long. The motors are available from 30 kW up to 6 500 kW in voltages from 380 V up to 14 000 V. The company also offers models for off-shore and

subsea applications.

The double suction axial thrust free dewatering pump, HDM, for capacities between 200 m³/h to 6500 m³/h and heads up to 1500 metres with motors up to 6.5 MW is the company’s special-ity for mine and acid mine dewatering.Ritz Pumps, Tel: (0) 87 805 7267, Email: [email protected], [email protected], [email protected]

Companies will find it more and more challenging to cool increasing loads in their data centres, says Perpetual Power Systems CEO, Mark van Heerden.

“Maintaining effective precision cool-ing for increased loads of nearly 10 times the current load, in high density server racks is becoming more difficult, especially within traditional data centre environments which are not suitable for these applications.

“In essence, companies will be dealing with legacy systems, while still main-

Increased loads




MARKET FORUM

On 1 November 2011, the pump and valve manufacturer, KSB, inaugurated a new factory for globe and gate valves in Changzhou, China. The production halls as well as a logistics and storage centre which span an area of 45 000 square metres were constructed over a period of ten months.

“By opening this new production site we have reached another milestone on our way to expanding our activities in the local Chinese market as well as in valve business worldwide,” states Dr. Peter Buthmann, representing the Board of Management at the opening ceremony in Changzhou.

taining current business continuity and trying to rebuild, introduce and manage a new way of cooling IT equipment in their data centres,” he explains.

However, there are a number of new technological advances in cooling, racking, data centre management and power supply and generation that can help companies deal with the chal-lenges they face as a result of growing IT equipment loads. New technology in data centre cooling is able to contain hot and cold aisles, separating the cold

air from the hot return air, thereby improving the efficiency of data centre cooling.

“Instead of producing nearly four times the cooling capacity that was needed previously, we can now optimise our capacity and produce only what is needed, resulting in electricity savings,” explains Mark.Perpetual Power Systems, Mark van Heerden, Tel: 0861 777 877, www.perpetualpower.co.za

New valve factory in ChinaFor KSB, China is one of the strategi-cally most important markets. Today, the manufacturer of pumps and valves has five production sites, seven sales offices, four agencies and two service centres in this country. More than 1 300 employees work there for KSB.

Website: www.ksbpumps.co.za

http://www.perpetualpower.co.za

http://www.ksbpumps.co.za

www.atlascopco.com


MARKET FORUM

The Omsa Group has supplied over 100 Praher PVC butterfly valves to U’Shaka Marine World in Durban which is the larg-est aquarium in the Southern Hemisphere.

One of the major considerations for Omsa was the internal and external corrosion risk of underground piping in such a water-filled environment thus contaminating the water, a pos-sibility with metal or steel valves. This made the Praher PVC but-terfly valve the preferred choice due to its on-site economic and environmental benefits.

Roger Kuch Omsa’s business development manager says, “The quality of the Praher PVC butterfly valve provides a long

Aesseal’s new PFR-throat bushing

Bushing BenefitsLocal pump manufacturing and repair companies are set to benefit from a new, high quality PFR throat bushing recently launched by Aesseal. The bushing has been developed over several years for pump stuffing boxes, where it allows softer wearing packing to be used. This re-duces gland packing costs and delivers a more effective sealing arrangement.

Spiral grooves and special flow geom-etry are the main features of the new bushing. These work together to reduce flush water usage and prevent solids from entering the stuffing box, resulting in less wear on the shaft and packing surfaces. Aesseal's PFR-throat bushing harnesses the displacement and orien-

lasting solution to U’Shaka Marine’s valve problems. Reli-ability was a key factor for the aquarium. We have supplied over 100 valves to the U’Shaka project, all are functioning well and sizes range from 80-600 mm diameter.The majority are butterfly type, but there are also some ball and diaphragm valves which are purpose-specific.

The Praher valves are used from the seawater intake, throughout the entire aquarium plant includ-ing the quarantine area which houses the more vulnerable animals. The contract is ongoing.

Lizelle Nel, OMSA, Tel: (011) 793-5562 or email: [email protected] www.Omsa.co.za

Safe and Sound

tation of the flow medium around the rotating shaft, using the spiral grooves to collect any solids between the shaft and the bushing, and expelling them by means of the induced flush stream.

A narrow gap to the shaft allows the

bushing to con-trol flushing water

volume, minimising leakage and reducing

the water requirement by up to 80 percent.

Aesseal (Pty) Ltd, Rob Waites, Tel: (011) 466-6500, E-mail: [email protected]


http://www.Omsa.co.za



Amec Minproc has appointed a new commercial man-ager Vilashika de la Guerre.

Bosch has appointed a new chief executive, Michael Gibbon.

Gerard Derbesy, CEO of BP Southern Africa (BPSA) has been elected chairperson of the South African Petroleum Industry Association as of January 2012.

African Oxygen Limited (Afrox) has announced that South African Brett Kimber, currently chief executive of industrial gases company Linde Korea, is to become the new managing director of industrial gases, welding and safety products group, Afrox.

Mohammed Sali-Ameen is the strategic market leader for South and Sub-Saharan Africa for Honeywell.

Des Pearson has joined Metso as general manager projects and sales support.

Chris le Roux has been appointed production manager, SEW Johannesburg.

Quadrant Engineering Plastic Products has divested of its filtration products business through a management buy-out process, and put its two fully-owned South African units, Quadrant PHS and Quadrant Chemplast, under the common leadership of Johan van der Westhuizen, who has served as Managing Director of the Chemplast business since 2007.

Vilashika de la Guerre Michael Gibbon Gerard Derbesy Brett Kimber

Chris le Roux

Mohammed Sali-Ameen

Johan van der Westhuizen

On the Move

“One of the ways in which Mining Pressure Systems (MPS) estab-lished commitment to mining is through a unique process known as pipe reclamation,” says Fred Crabbia, managing director of MPS. “During this process, MPS takes piping already utilised by the mine and exposes these pipes to rigorous testing, checking thick-ness, quality and whether the pipes are reclaimable. If the pipes are suitable they are cleaned and HDPE lined.”

The company has perfected a unique patented process of lining large bore steel piping using high density polyethylene (HDPE) liners. Using its unique ‘Tight Lining’ process, they developed a system which

enables HDPE liners to be easily and permanently installed conforming to old and new steel piping regulations. The HDPE pipe is drawn into the steel pipe by a mandrill through a converging throat and inlet ring and sealing mechanism, which introduces water at high pressure into the annular space between the in-ner wall of the steel pipe and the outer wall of the plastic (HDPE) pipe. This has the effect of reducing the outside diameter of the liner (HDPE pipe) and facilitating easy insertion into the host (steel outer pipe).

“This simple but effective process means that old pipes can be reclaimed at a fraction of the cost of replacing the entire pipe, and even extends the life of the pipe by 20 to 25 years,” says Fred.

“Many old pipes would have become

redundant” says Glen Anderson, Plant Engineer at AngloGold Ashanti. “After the pressurisation tests were performed by MPS, the pipes were lined with HDPE. This resulted in a significant cost-saving for Anglo-Gold Ashanti. Due to the high wear resistance of the HDPE, these lined pipes shouldn’t need replacement. “

“MPS is currently testing a new system which utilises a large di-ameter refrigeration pipe column, which will enhance and improve working conditions in the mine, thereby optimising efficiency,” concludes Fred.

Fred Crabbia, Mining Pressure Systems (MPS), Tel: (011) 660-8058Email: [email protected]

Pipe reclamation

MARKET FORUM

Des Pearson


http://www.miningppressure.co.za


Index to Advertisers

Airconduct 12

Altas Copco 4, 43

Ceccato 8

Chemsystems 8

Clyde Bergemann Africa Outside Front Cover

Dermaplastech Inside Front Cover

Engineer Placements 16

Gemü 19

Horne 14

Kira Engineering 26

Multi-Alloys 30

Power Africa 20

PPS 9

Pump & Seal Services 30

SAISC 28

Schaeffler 34

Spectra Carbide Tooling Inside Back Cover

Verder 32

Weir Minerals Outside Back Cover

Zest 10

Please fax us if you wish to subscribe to “SA Mechanical Engineer” at R405,00 (incl postage and VAT) per year; R1 020,00 per year for Africa/Overseas. We will post you an invoice on receipt of your fax.

PROMECH PUBLISHING

Fax No: (011) 781-1403

From:...................................................

(insert your name)

Title: ....................................................

Company: ...........................................

Address: ............................................

.............................................................

..........................................Code: ..............

Telephone: ( ) ...................................

Fax: ( ) ..............................................

Email:...................................................

Subscription

MARKET FORUM

In an important case, a South African malpractice law firm is pursuing one of the largest medical appliance firms in the world for damages caused by their hip implants.

Pretoria-based Law firm CP can Zyl At-torneys Inc. will be assisting clients in their claims against DePuy, part of the Johnson & Johnson “Family of Compa-nies” representing seven patients who had received the hip implants. One of the patients who is pursuing DePuy is Petro Pretorius whose hip bone eroded to the point where she had to have bone from a calf implanted prior to the fitting of the second replacement hip joint.

Petro had a left sided hip replacement using ASR Cup of DePuy on 23 Sep-tember 2006. CP van Zyl Attorneys Inc. are seeking compensation damages from DePuy on behalf of Pretorius and six other patients who had received the prosthesis. Sunelle van Heerden a professional consultant with CP van Zyl Attorneys Inc. said the prosthesis, manufactured by DePuy failed about two years ago and in addition to releasing heavy metals eroded Pretorius’ hip bone.

Information provided by DePuy shows that, based on data from the UK, one in eight of the surgeries done with the implant used on Pretorius had to have second hip replacement operations (revision surgery).

The DePuy documentation states that the company had decided to recall the ASR XL Acetabular and the DePuy Hip Resurfacing System.

Sunelle van Heerden, CP van Zyl Attorneys, Tel: (012) 460-7050

Fry’s Metal, involved in the secondary smelting and refining of lead, antimony and tin alloys and the production of lead and lead alloys in ingot form, has installed Apex Strip Curtains in its newly commissioned battery breaker plant.

Apex Strip Curtains feature a patented Balledge design which ensures a posi-tive thermal seal. This means that the strip curtain effectively prevents the ingress of dust into cordoned-off areas.

This is especially important in produc-tion applications where a dust-free environment is required. The actual strips overlap in a way that allows easy access for personnel and equipment, but still ensures a positive closure.

The company’s Rod Hedley says the order was placed with Apex Strip Cur-tains based on its “always immediate and excellent service”.

The curtains are suitable for small, medium and large openings where it is necessary to prevent the ingress of hot or cold air, dust, insects and any other contaminants. This system is suitable for areas where both people and vehicular traffic pass through and the strips are transparent, which promotes both visibility and safety. The specially formulated PVC material does not become brittle with age and can be used in areas where temperatures go down to minus 400C.

Wim Dessing, Apex Strip Curtains, Tel: (011) 452 8723, Email: www.apexstrip.co.za

The patented Balledge design on Apex Strip Curtains ensures a positive thermal seal

Multiple legalactions

Strip curtains in battery

breaker plant

http://www.apexstrip.co.za


ww

w.k

raas

-lac

hman

n.co

m

Competitor

Tiger·tec®

Tiger·tec® Silver

New Tiger,new benchmark:

100%performance

increase

upto

Tiger·tec® Silver is the high-performance miracle tool for steel and cast-iron milling from Walter. Extremely tough, extremely hard and extremely long-wearing, it improves performance by up to 100%.

The machining age is over. It’s time to Tiger.

Spectra Carbide Tooling Technology (PTY) Ltd. 24 Desmond Street, Korsten, Port Elizabeth PO Box 2631, North End, 6056 Tel: 0860 23 23 23 · Fax: 0860 33 22 33 [email protected] · www.spectra-sa.co.za www.walter-tools.com

WALTE-11-074_AdvMatToday_SA.indd 1 12.12.11 09:16

http://www.kraas-lachmann.com





http://www.spectra-sa.co.za

http://www.walter-tools.com

www.walter-tools.com


ExcellentMineralsSolutions

For more information contact us on: +27 (0)11 9292600www.weirminerals.com

Lower your operational costs with the Weir Minerals Solution

Weir Minerals is committed to delivering market leading products and services which meet the technical and commercial challenges across the full spectrum of mineral processing and power & industrial applications.

Robust design and rugged heavy-duty construction, the Isogate® slurry knife gate valve ensures long life and high reliability.

Isogate® valves now also include Autoball™ 3 way check valves, swing check valves, and a diverse range of mechanical and pneumatic pinch valves.

Expertise where it counts

ISOGATE®Slurry Valves

http://www.weirminerals.com

www.wierminerals.com

SA Mechanical Engineer Feb 12

Documents

Transcript of SA Mechanical Engineer Feb 12