S7-300 Module Data - Analog IO Module SM 334

7
Analog IO module SM 334; AI 4/AO 2 x 8/8 Bit; (6ES7334-0CE01-0AA0) Order number 6ES7334-0CE01-0AA0 Properties 4 inputs in one group and 2 outputs in one group Resolution 8 bits Programmable measurement type at each channel group Voltage Current Not programmable, measurement and output type defined by hardwiring Connected to potential of the backplane bus interface Electrically isolated to load voltage Terminal assignment The diagrams below show various wiring options. Note Note when wiring the SM 334: analog ground M ANA (terminal 15 or 18) is interconnected with chassis ground M of the CPU or interface module IM. Use a cable with a conductor cross-section of at least 1 mm 2 . The module will shut down if the ground connection between M ANA and M is missing. Inputs are read with 7FFF H , and outputs return a value of 0. The module may be destroyed if operated without ground over a longer period of time. the supply voltage for the CPU and/or the interface module (IM) may not be connected with reversed polarity. Reverse polarity will inevitably lead to the destruction of the module, because M ANA develops an impermissible high potential (+24 V.) S7-300 Module data Analog IO module SM 334; AI 4/AO 2 x 8/8 Bit; (6ES7334-0CE01-0AA0) Este documento es un extracto gratuito, compilado por el propio usuario, de la documentación ofrecida por Siemens para este producto. Se declina cualquier responsabilidad sobre la integridad de este documento. Esta previsto exclusivamente para fines propios e internos del usuario. No se permite su entrega a terceros. La documentación completa está disponible en https://www.automation.siemens.com/mdm/default.aspx?DocVersionId=6541330315&Language=en-US&TopicId=4920075787 4/9/2014

Transcript of S7-300 Module Data - Analog IO Module SM 334

Page 1: S7-300 Module Data - Analog IO Module SM 334

Analog IO module SM 334; AI 4/AO 2 x 8/8 Bit; (6ES7334-0CE01-0AA0)

Order number6ES7334-0CE01-0AA0

Properties

• 4 inputs in one group and 2 outputs in one group

• Resolution 8 bits

• Programmable measurement type at each channel group

― Voltage

― Current

• Not programmable, measurement and output type defined by hardwiring

• Connected to potential of the backplane bus interface

• Electrically isolated to load voltage

Terminal assignmentThe diagrams below show various wiring options.

Note

Note when wiring the SM 334:

• analog ground MANA(terminal 15 or 18) is interconnected with chassis ground M of the CPU orinterface module IM. Use a cable with a conductor cross-section of at least 1 mm2.

The module will shut down if the ground connection between MANA and M is missing. Inputs are readwith 7FFFH, and outputs return a value of 0. The module may be destroyed if operated without groundover a longer period of time.

• the supply voltage for the CPU and/or the interface module (IM) may not be connected with reversedpolarity. Reverse polarity will inevitably lead to the destruction of the module, because MANA developsan impermissible high potential (+24 V.)

S7-300 Module dataAnalog IO module SM 334; AI 4/AO 2 x 8/8 Bit; (6ES7334-0CE01-0AA0)

Este documento es un extracto gratuito, compilado por el propio usuario, de la documentación ofrecida por Siemens para este producto. Se declina cualquierresponsabilidad sobre la integridad de este documento. Esta previsto exclusivamente para fines propios e internos del usuario. No se permite su entrega a terceros.La documentación completa está disponible enhttps://www.automation.siemens.com/mdm/default.aspx?DocVersionId=6541330315&Language=en-US&TopicId=4920075787 4/9/2014

Page 2: S7-300 Module Data - Analog IO Module SM 334

Wiring: Current measurement and current output

① Internal supply

② Analog-to-Digital Converter (ADC)

③ Inputs: Current measurement

④ Outputs: Current output

⑤ Digital-to-Analog Converter (DAC)

⑥ Backplane bus interface

⑦ Equipotential bonding

⑧ Functional earthFigure 1 Wiring and block diagrams

S7-300 Module dataAnalog IO module SM 334; AI 4/AO 2 x 8/8 Bit; (6ES7334-0CE01-0AA0)

Este documento es un extracto gratuito, compilado por el propio usuario, de la documentación ofrecida por Siemens para este producto. Se declina cualquierresponsabilidad sobre la integridad de este documento. Esta previsto exclusivamente para fines propios e internos del usuario. No se permite su entrega a terceros.La documentación completa está disponible enhttps://www.automation.siemens.com/mdm/default.aspx?DocVersionId=6541330315&Language=en-US&TopicId=4920075787 4/9/2014

Page 3: S7-300 Module Data - Analog IO Module SM 334

Wiring: Voltage measurement and voltage output

① Internal supply

② Analog-to-Digital Converter (ADC)

③ Inputs: Voltage measurement

④ Outputs: Voltage output

⑤ Digital-to-Analog Converter (DAC)

⑥ Backplane bus interface

⑦ Equipotential bonding

⑧ Functional earthFigure 2 Wiring and block diagrams

S7-300 Module dataAnalog IO module SM 334; AI 4/AO 2 x 8/8 Bit; (6ES7334-0CE01-0AA0)

Este documento es un extracto gratuito, compilado por el propio usuario, de la documentación ofrecida por Siemens para este producto. Se declina cualquierresponsabilidad sobre la integridad de este documento. Esta previsto exclusivamente para fines propios e internos del usuario. No se permite su entrega a terceros.La documentación completa está disponible enhttps://www.automation.siemens.com/mdm/default.aspx?DocVersionId=6541330315&Language=en-US&TopicId=4920075787 4/9/2014

Page 4: S7-300 Module Data - Analog IO Module SM 334

Wiring: 4-wire transducers for current measurement and voltage output

① Internal supply

② Analog-to-Digital Converter (ADC)

③ Inputs: Current measurement with 4-wire transducer

④ Outputs: Voltage output

⑤ Digital-to-Analog Converter (DAC)

⑥ Backplane bus interface

⑦ Equipotential bonding

⑧ Functional earthFigure 3 Wiring and block diagrams

Technical data

Technical data

Dimensions and weight

Dimensions W x H x D (mm) 40 x 125 x 117

Weight approx. 285 g

Module-specific data

S7-300 Module dataAnalog IO module SM 334; AI 4/AO 2 x 8/8 Bit; (6ES7334-0CE01-0AA0)

Este documento es un extracto gratuito, compilado por el propio usuario, de la documentación ofrecida por Siemens para este producto. Se declina cualquierresponsabilidad sobre la integridad de este documento. Esta previsto exclusivamente para fines propios e internos del usuario. No se permite su entrega a terceros.La documentación completa está disponible enhttps://www.automation.siemens.com/mdm/default.aspx?DocVersionId=6541330315&Language=en-US&TopicId=4920075787 4/9/2014

Page 5: S7-300 Module Data - Analog IO Module SM 334

Technical data

Isochronous mode supported no

Number of inputs 4

Number of outputs 2

Cable length

• shieldedmax. 200 m

Voltages, currents, electrical potentials

Rated supply voltage of the rated electronics and load voltage L+ 24 VDC

Electrical isolation

• between channels and the backplane bus

• between channels and electronics power supply

noyes

between channels no

Maximum potential difference

• between inputs and MANA (CMV)

• between inputs (CMV)

1 VDC1 VDC

Isolation test voltage 500 VDC

Current consumption

• from the backplane bus

• from supply and load voltage L+ (no load)

max. 55 mAmax. 110 mA

Power loss of the module typ. 3 W

Generation of analog input values

Measuring principle

• Resolution (including overshoot range)Actual value conversion8 bits

Integration/conversion time (per channel)

• programmable

• Integration time in µs

no<500

Basic execution time of inputs max. 5 ms

Time constant of the input filter 0.8 ms

Generation of analog output values

• Resolution (including overshoot range) 8 bits

Conversion time (per channel)

• programmable

• Conversion time in µs

no<500

Basic execution time of outputs max. 5 ms

S7-300 Module dataAnalog IO module SM 334; AI 4/AO 2 x 8/8 Bit; (6ES7334-0CE01-0AA0)

Este documento es un extracto gratuito, compilado por el propio usuario, de la documentación ofrecida por Siemens para este producto. Se declina cualquierresponsabilidad sobre la integridad de este documento. Esta previsto exclusivamente para fines propios e internos del usuario. No se permite su entrega a terceros.La documentación completa está disponible enhttps://www.automation.siemens.com/mdm/default.aspx?DocVersionId=6541330315&Language=en-US&TopicId=4920075787 4/9/2014

Page 6: S7-300 Module Data - Analog IO Module SM 334

Technical data

Settling time

• with resistive load

• with capacitive load

• with inductive load

0.3 ms3.0 ms0.3 ms

Noise suppression, error limits for inputs

Noise suppression at F = n (f1 ± 1 %) (f1 = interference frequency)

• Common-mode noise (Vpp < 1 V) > 60 dB

Crosstalk between outputs > 50 dB

Operational error limit (across temperature range, relative to input range)

• Voltage input

• Current input± 0.9 %± 0.8 %

Basic error limit (operational error limit at 25 °C, relative to input range)

• Voltage input

• Current input± 0.7 %± 0.6 %

Temperature error (relative to input range) ± 0.005 %/K

Linearity error (relative to input range) ± 0.05 %

Repetition accuracy (in transient state at 25 °C, relative to input range) ± 0.05 %

Output ripple; range 0 Hz to 50 kHz (relative to output range) ± 0.05 %

Noise suppression, error limits of outputs

Crosstalk between outputs > 40 dB

Operational limit (across the temperature range, relative to output range)

• Voltage output

• Current output± 0.6 %± 1.0 %

Basic error limit (operational error limit at 25 °C, relative to output range)

• Voltage output

• Current output± 0.5 %± 0.5 %

Temperature error (relative to output range) ± 0.02 %/K

Linearity error (relative to output range) ± 0.05 %

Repetition accuracy (in transient state at 25 °C, relative to outputrange)

± 0.05 %

Output ripple (bandwidth relative to output range) ± 0.05 %

Status, interrupts, diagnostics

Interrupts none

Diagnostics functions none

Sensor selection data

S7-300 Module dataAnalog IO module SM 334; AI 4/AO 2 x 8/8 Bit; (6ES7334-0CE01-0AA0)

Este documento es un extracto gratuito, compilado por el propio usuario, de la documentación ofrecida por Siemens para este producto. Se declina cualquierresponsabilidad sobre la integridad de este documento. Esta previsto exclusivamente para fines propios e internos del usuario. No se permite su entrega a terceros.La documentación completa está disponible enhttps://www.automation.siemens.com/mdm/default.aspx?DocVersionId=6541330315&Language=en-US&TopicId=4920075787 4/9/2014

Page 7: S7-300 Module Data - Analog IO Module SM 334

Technical data

Input ranges (rated values) / input impedance

• Voltage

• Current

0 V to 10 V/100 k Ω0 mA to 20 mA/50 Ω

Maximum voltage at voltage input (destruction limit) max. 20 V continuous; 75 V for max. duration of 1 s(duty factor 1:20)

Maximum current at current input (destruction limit) 40 mA

Wiring of the signal sensors

• for voltage measurement

• for current measurement as 2-wire transducer as 4-wire transducer

using a 20-pin front connectorsupported

supported with external supply

Actuator selection data

Output ranges (rated values)

• Voltage

• Current

0 V to 10 V0 mA to 20 mA

Load impedance (in the rated output range)

• For voltage outputs― capacitive load

• For current outputs― inductive load

min. 5 kΩmax. 1 µFmax. 300 Ωmax. 1 mH

Voltage output

• Short-circuit protection

• Short-circuit current

yesmax. 11 mA

Current output

• noload voltagemax. 15 V

Destruction limit against external voltages/currents

• Voltage at outputs to MANA

• Current

max. 15 V, continuousmax. 50 mA d.c.

Wiring of the actuators

• for voltage output 2-wire connection 4-wire connection (measuring line)

using a 20-pin front connector

supported not supported

S7-300 Module dataAnalog IO module SM 334; AI 4/AO 2 x 8/8 Bit; (6ES7334-0CE01-0AA0)

Este documento es un extracto gratuito, compilado por el propio usuario, de la documentación ofrecida por Siemens para este producto. Se declina cualquierresponsabilidad sobre la integridad de este documento. Esta previsto exclusivamente para fines propios e internos del usuario. No se permite su entrega a terceros.La documentación completa está disponible enhttps://www.automation.siemens.com/mdm/default.aspx?DocVersionId=6541330315&Language=en-US&TopicId=4920075787 4/9/2014