S450TX Mini Skid Steer Sales Presentation
Transcript of S450TX Mini Skid Steer Sales Presentation
• Dimensions
• Lifting point
• Operator’s station
• Operational controls
• Ground drive
• Undercarriage
• Tracks
• Engine
• Loader arms
• Safety The S450TX takes the place of the S400TX
in the Vermeer lineup.
S450TX Mini Skid Steer
Machine Dimensions
Width 35.75”
(90.8 cm)
Hinge pin
71.9” (182.9 cm)
Height
53.4” (135.6 cm)
Length 75.4”
(191.5 cm)
Prototype shown
Power Performance Specifications
• 500 lb (226.8 kg) SAE-rated
operating capacity
• 1430 lb (648.6 kg) tipping load
rated for a variety of material-
handling tasks
Power
• Equipped with 24.8 hp
(18.2 kW) Kubota D902
diesel engine
• Liquid-cooled
• 12.5 gpm (47.3 L/min)
at 2950 psi (203.4 bar)
hydraulic flow
Engine/Hydraulics
Prototype shown
Fluid Capacities
Fuel:
7.5 gal (28.4 L)
diesel
Hydraulic fluid:
8 gal (30.3 L)
lockable cap
Prototype shown
Operator’s Station
• Cushioned support
– Cushions offer support to
operator
• Ride-on platform
– Spring-cushioned platform keeps
operator out of mud and debris
– Integrates the unit’s operator presence system
Prototype shown
Controls
Ground drive
control
Auxiliary
control
Loader arm
control
Throttle
Easy-to-operate manual joystick controls are designed and
positioned for quick learning and performance.
S400TX S450TX
Hydraulic System
• Four-pump system • Left Track (3250 psi)
• Right Track (3250 psi)
• Auxiliary (2950 psi)
• Loader Arm and Auxiliary (2950 psi)
Pump pressure: 4500 psi (310.3 bar)
Tracks
• Tracks – 7” (17.8 cm) track
• Ground pressure: 4 psi (.3 bar)
• Narrow footprint to access traditional 36” (91.4 cm) gate
entrances
– 9” (22.9 cm) track • Ground pressure: 3.1 psi (.2 bar)
• Reduced ground pressure for increased flotation
Undercarriage
• High track-mounted sprocket – Reduces premature wear on sprocket from rocks
– ADI cast sprocket is heat-treated for longer life
– Increases torque to ground drive
– New four-lip seal replaces the current two-lip seal
for improved life and lower cost of operation
Loader Arms
• Loader arm – Loader geometry
• Up-and-away-style arms
• 72” (182.9 cm) hinge pin height
enables operator to load into the
back of most pickup trucks
Prototype shown
Safety
• Operator presence system – If operator is not standing on the OPS
platform, hydraulic functions are disabled
• Lift arm support bar – Safety lock is used for service under raised
loader arms
Commonality
• Why is it important? – Parts stocking made simpler
– Reassurance of proven components
– Common components with other mini skid
steers: • Loader valve – S650TX
• Track [7” and 9” (17.8 cm and 22.9 cm)], rollers, bearings – S650TX
• Wheel motors – S650TX
• Operator presence system – S800TX, S650TX
Vermeer Corporation reserves the right to make changes in engineering, design and specifications;
add improvements; or discontinue manufacturing at any time without notice or obligation.
Vermeer and the Vermeer logo are trademarks of Vermeer Corporation in the U.S. and other
countries. Kubota is the trademark of Kubota Engine America Corporation.
© 2012 Vermeer Corporation
All Rights Reserved.