S3 Standard Grade C & D Woodwork Machine Tools. Next Slide >< Previous Slide Mr A. Atkinson Circular...
-
Upload
joe-canion -
Category
Documents
-
view
216 -
download
1
Transcript of S3 Standard Grade C & D Woodwork Machine Tools. Next Slide >< Previous Slide Mr A. Atkinson Circular...
S3 Standard Grade C & D
Woodwork Machine Tools
Next Slide >< Previous Slide
Circular Saw
Machine 1 Machine 2
Bandsaw
Next Slide >< Previous Slide
Pillar/Vertical Drill
Machine 3 Machine 4
Horizontal Drill
Next Slide >< Previous Slide
Sanding Machine
Machine 5 Machine 6
Wood Turning Lathe
Next Slide >< Previous Slide
Mortising Machine
Machine 7 Machine 8
Router
Next Slide >< Previous Slide
Planer/Thicknesser
Machine 9 Machine 10
Flatbed Grinder
Next Slide >< Previous Slide
Circular Saw – Used for ripping and cross cutting; adjustable fence and tilting blade allows quick accurate cutting. Riving knife splits timber and prevents binding; various blades available.
Definitions
Band Saw – A toothed band of steel is tensioned and driven round two pulley wheels. Blade runs between guides; use mainly for cross cut work, cutting ply and sheet material.
Pillar/Vertical Drill – Fixed machine for accurate drilling of holes. Drill held in a Jacob’s Chuck. Various Speeds available; adjustable table for height and angle.
Next Slide >< Previous Slide
Horizontal Drilling Machine – Fixed machine for accurate drilling of holes; drill held in a Jacob’s Chuck. Drill and work piece held horizontally. Often used to produce dowel joints.
Definitions
Sanding Machine – abrasive disc rotates ant high speed; work piece held on table and fed towards down turning wheel. Adjustable fence allows accurate sanding of end grain and mitre joints etc.
Next Slide >< Previous Slide
Mortising Machine – Often called hollow chisel mortiser; drill rotates inside a hollow, four sided chisel to drill and cut square holes. Work piece clamped to table and fed underneath chisel.
Definitions
Router – A hand held power tool used to cut housings, mouldings etc. can be table mounted (as shown). Variable depth and a large cutter selection allows a great range of profiles to be cut.
Wood Turning Lathe – Used for wood turning between centres and faceplate turning. Wood held and rotated by lathe whilst operator cuts using chisels and gouges resting on a tool rest. Variable speed.
Next Slide >< Previous Slide
Horizontal or Flatbed Grinding Machine – A power driven, horizontal, artificial grindstone; used to grind chisels and plane irons prior to honing. Adjustable clamp ensures accuracy. Oil feed keeps work piece cool.
Definitions
Planer/Thicknesser – Blades are held in a rotating, balanced block and wood is passed over the top to produce a high planed finish. Adjustable thickness enables accurate dressing of wood.