S3-C1
-
Upload
le-duc-anh -
Category
Documents
-
view
223 -
download
0
Transcript of S3-C1
-
8/3/2019 S3-C1
1/10
1 Which layer of the hierarchical network design model is refered to as the high-speed b
internetwork, where high availability and redundancy are critical?
access layer
core layer
data-link layer
distribution layer
network layer
physical layer
Observable Description Max Value
1correctness of
response
2 points for Option 2
0 points for any other
option
2
This item references content from the following areas:CCNA Exploration: LAN Switching and Wireless
1.1.1 The Hierarchical Network Model
2 Which layer of the hierarchical design model provides a means of connecting devices
and controlling which devices are allowed to communicate on the network?
application
access
distribution
network
core
Observable Description Max Value
1correctness ofresponse
2 points for Option 20 points for any other
option
2
This item references content from the following areas:CCNA Exploration: LAN Switching and Wireless
1.1.1 The Hierarchical Network Model3 Which hierarchical design model layer controls the flow of network traffic using polic
delineates broadcast domains by performing routing functions between virtual LANs
application
access
distribution
-
8/3/2019 S3-C1
2/10
network
core
Observable Description Max Value
1 correctness ofresponse
2 points for Option 30 points for any other
option
2
This item references content from the following areas:
CCNA Exploration: LAN Switching and Wireless
1.1.1 The Hierarchical Network Model
4 What is the likely impact of moving a conventional company architecture to a comple
network?
Local analog phone service can be completely outsourced to cost-effective provid
The Ethernet VLAN structure is less complex.
A shared infrastructure is created resulting in a single network to manage.
QoS issues are greatly reduced.
There is less bandwidth competition between voice and video streams.
Observable Description Max Value
1correctness ofresponse
2 points for Option 30 points for any other
option
2
This item references content from the following areas:CCNA Exploration: LAN Switching and Wireless
1.1.3 What is a Converged Network?
5 Link aggregation should be implemented at which layer of the hierarchical network?
core only
distribution and core
access and distribution
access, distribution, and core
Observable Description Max Value
1correctness of
response
2 points for Option 4
0 points for any other
option
2
This item references content from the following areas:
-
8/3/2019 S3-C1
3/10
CCNA Exploration: LAN Switching and Wireless
1.2.3 Switch Features in a Hierarchical Network
6 What statement best describes a modular switch?
a slim-line chassis
allows interconnection of switches on redundant backplane
defined physical characteristics
flexible characteristics
Observable Description Max Value
1correctness ofresponse
2 points for Option 4
0 points for any otheroption
2
This item references content from the following areas:CCNA Exploration: LAN Switching and Wireless
1.2.2 Switch Features
7 Which feature supports higher throughput in switched networks by combining multip
convergence
redundant links
link aggregation
network diameter
Observable Description Max Value
1correctness of
response
2 points for Option 3
0 points for any otheroption
2
This item references content from the following areas:
CCNA Exploration: LAN Switching and Wireless
1.1.2 Principles of Hierarchical Network Design
8 Configuring communication between devices on different VLANs requires the use of
the OSI model?
Layer 1
Layer 3
Layer 4
Layer 5
Observable Description Max Value
-
8/3/2019 S3-C1
4/10
1correctness of
response
2 points for Option 2
0 points for any other
option
2
This item references content from the following areas:
CCNA Exploration: LAN Switching and Wireless
1.2.2 Switch Features
9 Which two characteristics are associated with enterprise level switches? (Choose two
low port density
high forwarding rate
high latency level
support link aggregation
predefined number of ports
Observable DescriptionMax
Value
1correctness ofresponse
Option 2 and Option 4 are correct.
1 point for each correct option.0 points if more options are selected
than required.
2
This item references content from the following areas:CCNA Exploration: LAN Switching and Wireless
1.2.2 Switch Features
10 Which two features are supported at all three levels of the Cisco three-layer hierarch
(Choose two.)
Power over Ethernet
load balancing across redundant trunk links
redundant components
Quality of Service
link aggregation
Observable Description MaxValue
1correctness ofresponse
Option 4 and Option 5 are correct.
1 point for each correct option.0 points if more options are selected
than required.
2
-
8/3/2019 S3-C1
5/10
This item references content from the following areas:
CCNA Exploration: LAN Switching and Wireless
1.2.3 Switch Features in a Hierarchical Network
11 A network administrator is selecting a switch that will operate at the network core. W
features should the switch support for optimum network performance and reliability?three.)
port security
security policies
10 Gigabit Ethernet
quality of service (QoS)
hot-swappable hardware
Power over Ethernet (PoE)
Observable Description MaxValue
1correctness of
response
Option 3, Option 4, and Option 5
are correct.1 point for each correct option.
0 points if more options are selected
than required.
3
This item references content from the following areas:
CCNA Exploration: LAN Switching and Wireless
1.2.3 Switch Features in a Hierarchical Network12 Which hierarchical design characteristic would be recommended at both the core and
layers to protect the network in the case of a route failure?
PoE
redundancy
aggregation
access lists
Observable Description Max Value
1correctness ofresponse
2 points for Option 20 points for any other
option
2
This item references content from the following areas:
CCNA Exploration: LAN Switching and Wireless
1.1.2 Principles of Hierarchical Network Design
-
8/3/2019 S3-C1
6/10
13 At which heirarchical layer are switches normally not required to process all ports at w
core layer
distribution layer
access layer
entry layer
Observable Description Max Value
1correctness of
response
2 points for Option 3
0 points for any other
option
2
This item references content from the following areas:
CCNA Exploration: LAN Switching and Wireless
1.2.2 Switch Features
14 For organizations that are implementing a voice over IP solution, what functionality s
enabled at all three layers of the hierarchical network?
Power over Ethernet
quality of service
switch port security
inter-VLAN routing
Observable Description Max Value
1 correctness ofresponse
2 points for Option 2
0 points for any otheroption
2
This item references content from the following areas:
CCNA Exploration: LAN Switching and Wireless
1.2.3 Switch Features in a Hierarchical Network
15
-
8/3/2019 S3-C1
7/10
Refer to the exhibit. Beginning with HR servers and workstations, a network engineer is des
security structure for the network. Which set of policies adheres to the hierarchical network principles?
Implement Layer 3 switching on S1 to reduce the packet processing load on D1 and D2
security processing on S1 to reduce network traffic load.Configure port security options on S1. Use Layer 3 access control features on D1 and D
access to the HR servers to just the HR subnet.Move all HR assets out of the data center and connect them to S1. Use Layer 3 security to deny all traffic into and out of S1.
Perform all port access and Layer 3 security functions on C1.
Observable Description Max Value
1correctness
of response
2 points for Option 2
0 points for any other option2
This item references content from the following areas:
CCNA Exploration: LAN Switching and Wireless
1.1.1 The Hierarchical Network Model
16 A network technician is asked to examine an existing switched network. Following t
examination, the technician makes recommendations for adding new switches where
replacing existing equipment that hampers performance. The technician is given a buto proceed. Which two pieces of information would be helpful in determining necess
for new switches? (Choose two.)
-
8/3/2019 S3-C1
8/10
forwarding rate
traffic flow analysis
expected future growth
number of required core connections
number of hubs that are needed in the access layer to increase performance
Observable DescriptionMax
Value
1correctness ofresponse
Option 2 and Option 3 are correct.
1 point for each correct option.0 points if more options are selected
than required.
2
This item references content from the following areas:
CCNA Exploration: LAN Switching and Wireless
1.2.1 Considerations for Hierarchical Network Switches
17 A technician is attempting to explain Cisco StackWise technology to a client that is sestackable switches. Which explanation accurately describes StackWise technology?
StackWise technology allows up to eight ports to be bound together to increase av
bandwidth.StackWise technology allows the switch to deliver power to end devices by using
Ethernet cabling.
StackWise technology allows the switch capabilities and ports to be expanded by
line cards.
StackWise technology allows up to nine switches to be interconnected via the useredundant backplane.
Observable Description Max Value
1correctness of
response
2 points for Option 4
0 points for any other
option
2
This item references content from the following areas:
CCNA Exploration: LAN Switching and Wireless
1.2.2 Switch Features
18 Which three features are commonly supported at the distribution layer of the Cisco hnetwork model? (Choose three.)
security policies
Power over Ethernet
switch port security
-
8/3/2019 S3-C1
9/10
quality of service
Layer 3 functionality
end user access to network
Observable Description MaxValue
1correctness of
response
Option 1, Option 4, and Option 5are correct.
1 point for each correct option.
0 points if more options are selectedthan required.
3
This item references content from the following areas:
CCNA Exploration: LAN Switching and Wireless
1.2.3 Switch Features in a Hierarchical Network19 Which layer of the OSI model does an access layer LAN switch use to make a forwar
Layer 1
Layer 2
Layer 3
Layer 4
Observable Description Max Value
1
correctness of
response
2 points for Option 2
0 points for any otheroption
2
This item references content from the following areas:
CCNA Exploration: LAN Switching and Wireless
1.2.2 Switch Features
20
-
8/3/2019 S3-C1
10/10
Refer to the exhibit. What characteristic of hierarchical network designs is exhibited by havi
connected to both SW1 and Sw2?
scalability
security
redundancy
maintainability
Observable Description Max Value
1 correctnessof response
2 points for Option 30 points for any other option
2
This item references content from the following areas:
CCNA Exploration: LAN Switching and Wireless
1.1.1 The Hierarchical Network Model