P R O D U C T S F O R A

G R O W I N G W O R L D

O F T E C H N O L O G Y

S E L F - S U P P O R T I N G T O W E R S

The ROHN SSV Series of Self -Supporting Towers provide an excellent strength to cost ratio proven by

years of use. In production over 20 years, the SSV has evolved into a highly efficient and wide ranging

system of custom towers produced from pre-engineered sections.

T I M E T E S T E D S T R E N G T H A N D D E S I G N

W O R L D W I D E M U L T I P L E U S E S

S E L F - S U P P O R T I N G T O W E R S

SSV towers are in use Worldwide for two way communications,

microwave, cellular, PCS, public safety, broadcast, STL, surveillance

camera mounts, solar power stations, weather stations and even high

level lighting of sports stadiums.

U N M A T C H E D

A T T E N T I O N

T O D E T A I L

Backed by one of the largest manufacturers of

communications towers in the world, ROHN Self-

Supporting Towers are produced with unmatched

attention to detail. As with all ROHN products,

SSV Towers are Hot Dip Galvanized after fabrica-

tion to assure years of corrosion free use. In this

process each section of the tower is totally

immersed in molten zinc, allowing every square

inch of the tower, inside and out, to be com-

pletely covered. Hot Dip Galvanizing protects all

points of welding and construction against rust

and corrosion while providing an attractive finish.

SSV Structures are available with a wide variety

of pre-designed accessories including platforms,

antenna mounts, ladders, lighting accessories,

mounts, ice shields and safety climbing devices.

Most SSV sections use angle steel cross bracing,

with lighter upper sections using a Zig-Zag® brace

pattern. SSV sections can be combined with “K”

braced SSMW tower sections for added height

and strength when needed.

S S V T O W E R -F E A T U R E S :

• Time tested design

• Tubular or solid steel leg design

• For applications to 300 feet

• Custom designs from pre-engineered sections

• Available with a free 20 year warranty

• All parts Hot Dip Galvanized after fabrication

Standard SSV Towers are available for applications

not requiring site specific engineering analysis see

section for details.

Form No. 98-2858

6718 West Plank Road • Peoria, Illinois 61604 USAPhone: 309 - 697 - 4400 • FAX: 309 - 697 - 5612 Website: http://www.rohnnet.com • E-mail: mail@rohnnet.com