S Commands - Cisco - Global Home Page · S Commands • setinservice, page 9 • show, page 10 •...

S Commands

• setinservice, page 9

• show, page 10

• show, page 11

• show aaa, page 12

• show aaa user default-role, page 13

• show adjacency vrf, page 14

• show bfd clients, page 15

• show bfd ipv4 neighbors, page 16

• show bfd ipv6 neighbors, page 17

• show bfd neighbors, page 18

• show cdp all, page 19

• show cdp entry, page 20

• show cdp global, page 21

• show cdp interface, page 22

• show cdp neighbors, page 23

• show cdp traffic interface, page 24

• show clock, page 25

• show copp policy, page 26

• show copp policy stats, page 27

• show copyright, page 28

• show cores, page 29

• show diagnostic content module, page 30

• show diagnostic result module, page 31

• show diagnostic status module, page 32

Cisco ACI Switch Command Reference, NX-OS Release 12.x 1

• show dpp policy, page 33

• show eigrp event vrf, page 34

• show eigrp interfaces, page 35

• show eigrp traffic vrf, page 36

• show eigrp vrf, page 37

• show eigrp vrf, page 38

• show endpoint, page 39

• show environment, page 40

• show environment fex, page 41

• show fcoe, page 42

• show fex, page 43

• show hardware, page 44

• show hostname, page 45

• show hsrp bfd-sessions, page 46

• show hsrp delay, page 47

• show hsrp +, page 48

• show hsrp summary, page 49

• show interface, page 50

• show interface brief, page 51

• show interface capabilities, page 52

• show interface counters, page 53

• show interface counters, page 54

• show interface counters brief, page 55

• show interface counters detailed, page 56

• show interface counters errors, page 57

• show interface counters errors, page 58

• show interface counters snmp, page 59

• show interface counters snmp, page 60

• show interface debounce, page 61

• show interface description, page 62

• show interface fex-fabric, page 63

• show interface flowcontrol, page 64

• show interface flowcontrol, page 65

Cisco ACI Switch Command Reference, NX-OS Release 12.x2

S Commands

• show interface mac-address, page 66

• show interface priority-flow-control, page 67

• show interface snmp-ifindex, page 68

• show interface status, page 69

• show interface status, page 70

• show interface switchport, page 71

• show interface transceiver, page 72

• show interface trunk, page 73

• show interface trunk, page 74

• show inventory, page 75

• show ip arp, page 76

• show ip community-list, page 77

• show ip dhcp client, page 78

• show ip dhcp global statistics, page 79

• show ip dhcp relay, page 80

• show ip extcommunity-list, page 81

• show ip igmp gipo joins, page 82

• show ip igmp interface, page 83

• show ip igmp snooping, page 84

• show ip igmp snooping explicit-tracking, page 85

• show ip igmp snooping groups + +, page 86

• show ip igmp snooping lookup-mode, page 87

• show ip igmp snooping mrouter, page 88

• show ip igmp snooping querier, page 89

• show ip igmp snooping statistics, page 90

• show ip igmp vrf all, page 91

• show ip interface, page 92

• show ip mroute, page 93

• show ip ospf database, page 94

• show ip ospf database detail, page 96

• show ip ospf interface, page 98

• show ip ospf neighbors, page 99

• show ip ospf neighbors vrf, page 100


S Commands

• show ip ospf route vrf, page 101

• show ip ospf summary-address vrf, page 102

• show ip ospf traffic, page 103

• show ip ospf vrf, page 104

• show ip pim group-range, page 105

• show ip pim interface, page 106

• show ip pim neighbor, page 107

• show ip pim oif-list, page 108

• show ip pim route, page 109

• show ip pim rp, page 110

• show ip pim statistics, page 111

• show ip prefix-list, page 112

• show ip process, page 113

• show ip route, page 114

• show ip static-route, page 116

• show ipv6 dhcp relay, page 117

• show ipv6 icmp adjacency, page 118

• show ipv6 icmp interface, page 119

• show ipv6 interface, page 120

• show ipv6 mld snooping, page 121

• show ipv6 mld snooping explicit-tracking, page 122

• show ipv6 mld snooping groups, page 123

• show ipv6 mld snooping lookup-mode, page 124

• show ipv6 mld snooping mrouter, page 125

• show ipv6 mld snooping querier, page 126

• show ipv6 mld snooping statistics, page 127

• show ipv6 nd interface, page 128

• show ipv6 prefix-list, page 129

• show ipv6 process, page 130

• show ipv6 route + vrf, page 131

• show ipv6 static-route, page 133

• show isis adjacency vrf, page 134

• show isis database vrf, page 135


S Commands

• show isis dteps vrf, page 136

• show isis interface vrf, page 137

• show isis protocol vrf, page 138

• show isis route vrf, page 139

• show isis statistics vrf, page 140

• show isis traffic vrf, page 141

• show lacp counters, page 142

• show lacp interface, page 143

• show lacp neighbor, page 144

• show lacp port-channel, page 145

• show lacp system-identifier, page 146

• show lldp dcbx interface, page 147

• show lldp entry, page 148

• show lldp interface, page 149

• show lldp neighbors, page 150

• show lldp timers, page 151

• show lldp tlv-select, page 152

• show lldp traffic, page 153

• show locator-led status, page 154

• show logging ip access-list cache, page 155

• show logging ip access-list drop-codes, page 156

• show logging ip access-list span, page 157

• show mac address-table +, page 158

• show module, page 159

• show module fex, page 160

• show npv external-interface-usage, page 161

• show npv flogi-table, page 162

• show npv flogi-table interface, page 163

• show npv status, page 164

• show npv traffic-map, page 165

• show ntp authentication-keys, page 166

• show ntp authentication-status, page 167

• show ntp peer-status, page 168


S Commands

• show ntp peers, page 169

• show ntp statistics peer ipaddr, page 170

• show ntp trusted-keys, page 171

• show ospfv3 database, page 172

• show ospfv3 database detail, page 174

• show ospfv3 interface, page 176

• show ospfv3 neighbors, page 177

• show ospfv3 neighbors vrf, page 178

• show ospfv3 route vrf, page 179

• show ospfv3 summary-address vrf, page 180

• show ospfv3 traffic, page 181

• show ospfv3 vrf, page 182

• show port-channel capacity, page 183

• show port-channel database, page 184

• show port-channel extended, page 185

• show port-channel summary, page 186

• show port-channel traffic, page 187

• show port-channel usage, page 188

• show porttrack, page 189

• show processes, page 190

• show processes cpu, page 191

• show processes cpu sort, page 192

• show processes memory, page 193

• show radius-server, page 194

• show redundancy status, page 195

• show route-map, page 196

• show san-port-channel database, page 197

• show san-port-channel summary, page 198

• show san-port-channel usage, page 199

• show service copy info, page 200

• show service redir info, page 201

• show snmp, page 202

• show snmp community, page 203


S Commands

• show snmp context, page 204

• show snmp engineID, page 205

• show snmp host, page 206

• show snmp summary, page 207

• show snmp user, page 208

• show sprom, page 209

• show switchname, page 210

• show system error-id, page 211

• show system redundancy status, page 212

• show system reset-reason, page 213

• show system reset-reason fex, page 214

• show system resources, page 215

• show system uptime, page 216

• show tacacs-server, page 217

• show users, page 218

• show version, page 219

• show version module, page 220

• show vlan, page 221

• show vlan all-ports, page 222

• show vlan brief, page 223

• show vlan fcoe, page 224

• show vlan id, page 225

• show vlan reserved, page 226

• show vlan summary, page 227

• show vpc, page 228

• show vpc consistency-parameters, page 229

• show vpc peer-keepalive, page 230

• show vpc role, page 231

• show vpc statistics peer-keepalive, page 232

• show vpc statistics vpc, page 233

• show vrf, page 234

• show vrf interface, page 235

• show vsan, page 236


S Commands

• show vsan membership, page 237

• show vsan membership interface, page 238

• show vsan usage, page 239

• show zoning-filter, page 240

• show zoning-rule +, page 241


S Commands

setinservicesetinservice

Syntax Description Put the node ports back in service.setinservice


S Commandssetinservice

showshow { { ip eigrp neighbors [detail] {iface0 | { [ address ] vrf {vrf-name| all} }}} | { ipv6 eigrp neighbors[detail] {iface0 | { [ ipv6-address] vrf {vrf-name| all} }}}}

Syntax Description Show running system information.show

Display EIGRP information for IPv4 address family.ip

Display EIGRP information for IPv6 address family.ipv6

Show EIGRP information.eigrp

Display information on EIGRP neighbors (peers).neighbors

Show detailed Information on Neighbors.detail

Show Peers on this interface only. The type is interface. The values are ethernet,port-channel, vlan, loopback.

iface0

Peer Address. The type is ipaddr.address

ipv6 Peer Address. The type is ipv6.ipv6-address

Show EIGRP information per-VRF.vrf

Name of the VRF. The type is string.vrf-name

Show EIGRP information for all VRF.all


S Commandsshow

showshow [path]

Syntax Description Show Command.show

directory of the mo. The type is string.path


S Commandsshow

show aaashow aaa {authentication | groups}

Syntax Description Show Information.show

aaa.aaa

Authentication.authentication

Groups.groups


S Commandsshow aaa

show aaa user default-roleshow aaa user default-role


aaa.aaa

User.user

Default role assigned by aaa-admin for remote authentication.default-role


S Commandsshow aaa user default-role

show adjacency vrfshow { ip | ipv6 } adjacency [ { interface | ip-addr } ] [ detail | summary | non-best ] vrf { vrf-name | all }


Display IP information.ip

Display IPv6 information.ipv6

Display adjacency table.adjacency

Display specific interface adjacencies only. The type is interface.interface

Show adjacency summary.summary

IPV4 source address. The type is ipaddr.ip-addr

Show both best/non-best entries.non-best

Show detail information of adjacency entries.detail

Display per-VRF information.vrf

VRF name. The type is string.vrf-name

Show adjacency entries for all vrfs.all


S Commandsshow adjacency vrf

show bfd clientsshow bfd clients


BFD commands.bfd

Bfd client list.clients


S Commandsshow bfd clients

show bfd ipv4 neighborsshow bfd ipv4 neighbors [{modulemodule_no}] [{interface intf_id}] [{application bfd_cli_client_names}][{src-ip src_ip}] [{dest-ip dest_ip}] [{vrf {vrf-name | all}}] [details] [sort-by {src-ip | dest-ip | interface}]


BFD commands.bfd

Ipv4 neighbors.ipv4

Neighbors.neighbors

Module.module

module number. The type is uinteger. to 32. The range is from 0module_no

Interface.interface

show bfd sessions based on interface id. The type is interface. Thevalues are ethernet, loopback, vlan, tunnel.

intf_id

Application.application

Application name. The type is string.bfd_cli_client_names

Source ip.src-ip

Source ip value. The type is ipaddr.src_ip

Destination ip.dest-ip

Destination ip value. The type is ipaddr.dest_ip



Display information for all VRFs.all

Details.details

Sort by.sort-by


S Commandsshow bfd ipv4 neighbors

show bfd ipv6 neighborsshow bfd ipv6 neighbors [{modulemodule_no}] [{interface intf_id}] [{application bfd_cli_client_names}][{src-ip src_ipv6}] [{dest-ip dest_ipv6}] [{vrf {vrf-name | all}}] [details] [sort-by {src-ip | dest-ip | interface}]


BFD commands.bfd

Ipv6 neighbors.ipv6

Neighbors.neighbors

Module.module


Interface.interface


intf_id



Source ip.src-ip

Source ipv6 value. The type is ipv6.src_ipv6


Destination ipv6 value. The type is ipv6.dest_ipv6




Details.details

Sort by.sort-by


S Commandsshow bfd ipv6 neighbors

show bfd neighborsshow bfd neighbors [{module module_no}] [{interface intf_id}] [{application bfd_cli_client_names}][{src-ip src_ip}] [{dest-ip dest_ip}] [{vrf {vrf-name | all}}] [details] [sort-by {src-ip | dest-ip | interface}]


BFD commands.bfd

Neighbors.neighbors

Module.module


Interface.interface


intf_id



Source ip.src-ip

Source ip value. The type is ipaddr.src_ip

Source ipv6 value. The type is ipv6.src_ipv6


Destination ip value. The type is ipaddr.dest_ip

Destination ipv6 value. The type is ipv6.dest_ipv6




Details.details

Sort by.sort-by


S Commandsshow bfd neighbors

show cdp allshow cdp all


Show Cisco Discovery Protocol information.cdp

Show all interfaces in CDP database.all


S Commandsshow cdp all

show cdp entryshow cdp entry { all | { name dev-id } }



Show CDP entries in database.entry

Show all CDP entries in database.all

Show a specific CDP entry matching a name.name

Device ID (Max Size 256). The type is string.dev-id


S Commandsshow cdp entry

show cdp globalshow cdp global



Show CDP global parameters.global


S Commandsshow cdp global

show cdp interfaceshow cdp interface arg0



Show CDP parameters for an interface.interface

Interface. The type is interface. The values are ethernet, mgmt.arg0


S Commandsshow cdp interface

show cdp neighborsshow cdp neighbors [ { interface arg0 } ] [ detail ]



Show CDP neighbors.neighbors

Show CDP neighbors on an interface.interface


Show CDP neighbors detailed.detail


S Commandsshow cdp neighbors

show cdp traffic interfaceshow cdp traffic interface arg0



Show cdp traffic statistics.traffic

Show cdp traffic statistics on an interface.interface



S Commandsshow cdp traffic interface

show clockshow clock


Display current Date.clock


S Commandsshow clock

show copp policyshow copp policy


Control Plane Policing (CoPP) information.copp

CoPP policies.policy


S Commandsshow copp policy

show copp policy statsshow copp policy stats


Control Plane Policing (CoPP) information.copp

CoPP policies.policy

CoPP policies packet statistics.stats


S Commandsshow copp policy stats

show copyrightshow copyright


Copyright information.copyright


S Commandsshow copyright

show coresshow cores [history]

Syntax Description Show information.show

Show all core dumps for the current vdc.cores

Show core dumps history.history


S Commandsshow cores

show diagnostic content moduleshow diagnostic content module { all | module_id }


Diagnostic commands.diagnostic

Show diagnostic test content.content

Module Keyword.module

Select all module ID.all

Module ID. The type is string.module_id


S Commandsshow diagnostic content module

show diagnostic result moduleshow diagnostic result module { all | { module_id [ { test test_id } ] } } [detail]



Show diagnostic test result.result

Module Keyword.module

Select all module ID.all

Diagnostic test selection.test

Detailed result.detail


Test ID. The type is string.test_id


S Commandsshow diagnostic result module

show diagnostic status moduleshow diagnostic status module module_id



Show test status(running/enqueued).status

<1-30> Module number.module



S Commandsshow diagnostic status module

show dpp policyshow dpp policy


Data Plane Policing (DPP) information.dpp

DPP policies.policy


S Commandsshow dpp policy

show eigrp event vrfshow {ip|ipv6} eigrp event vrf {vrf-name | all}




Display EIGRP status and configuration.eigrp

IP-EIGRP Events.event

Virtual Router Context.vrf

The type is string. VRF name.vrf-name



S Commandsshow eigrp event vrf

show eigrp interfacesshow { ip | ipv6 } eigrp interfaces [brief] { arg0 | { vrf { all | vrf-name } } }





Display information on EIGRP enabled interface.interfaces

Show only Brief information.brief

Interface. The type is interface. The values are ethernet, port-channel, vlan,loopback.

arg0





S Commandsshow eigrp interfaces

show eigrp traffic vrfshow { ip | ipv6 } eigrp traffic vrf { all | vrf-name }





Display EIGRP traffic Statistics.traffic

Show EIGRP information for a VRF.vrf

Show EIGRP information for all VRFs.all



S Commandsshow eigrp traffic vrf

show eigrp vrfshow {ip|ipv6} eigrp [detail] vrf {vrf-name | all}




Display EIGRP status and configuration.eigrp

Display detailed information.detail

Virtual Router Context.vrf




S Commandsshow eigrp vrf

show eigrp vrfshow { ip | ipv6 } eigrp {topology | route} [prefix | ipv6-prefix | active | pending | zero-successors | all-links]vrf {vrf-name | all}




Display information on EIGRP topology (routes).topology

Display information on EIGRP routes.route

Show Information on Active Routes only.active

Show Information on only the Routes pending on any replies.pending

Show Information on only the Routes having Zero Successors.zero-successors

Show all Nexthops of a Route, not just Feasible Successors.all-links

Show information on this Prefix only. The type is ipprefix.prefix

Show information on this ipv6 Prefix only. The type is ipv6_prefix.ipv6-prefix






S Commandsshow eigrp vrf

show endpointshow endpoint [ { { macmac-addr } | { ip ip-addr | ipv6-addr} [ detail ] } | { [ { vrf vrf-name } | { vlan vlan-id} | { interface interface-name } ] [ { summary | detail } ] } ]

Syntax Description End point commands.show

End point.endpoint

Mac address information.mac

IPv4/IPv6 address information.ip

VRF.vrf

VLAN.vlan

Interface.interface

Endpoint summary information.summary

Endpoint detailed information.detail

MAC Address. The type is ethernet.mac-addr

IP address. The type is ipaddr.ip-addr

IPV6 address. The type is ipv6.ipv6-addr

VRF Name. The type is string.vrf-name

VLAN ID. The type is integer. The range is from 1 to 4095.vlan-id

Interface name. The type is interface.interface-name


S Commandsshow endpoint

show environmentshow environment [ fan | power | temperature ]


Environment Information.environment

Fan Information.fan

Power supply Information.power

Sensor Temperature Information.temperature

In the command output of the show environment power command, the Total Power Allocated (budget)summary data will be provided only for Cisco Nexus 9504, 9508, and 9516 modular spine switches. TheTotal Power Allocated (budget) summary data will not be provided for Cisco Nexus 9336 fixed spineswitches or for leaf switches.

Note


S Commandsshow environment

show environment fexshow environment fex { fexid | all } [ { fan | power | temperature } ]


System environment information.environment

Show fex environment information.fex

FEX number. The type is integer. The range is from 101 to 164.fexid

Show information for all FEX.all

Fan information.fan

Power capacity and power distribution information.power

Temperature sensor information.temperature


S Commandsshow environment fex

show fcoeshow fcoe [ database ]


Show FCOE paramaters.fcoe

Show FCOE database.database


S Commandsshow fcoe

show fexshow fex [ { fexid [detail | version | transceiver] } | detail ]


Show FEX information.fex

Detailed information.detail

Show FEX.transceiver

Show the software version.version



S Commandsshow fex

show hardwareshow hardware


Show hardware information.hardware


S Commandsshow hardware

show hostnameshow hostname


Hostname.hostname


S Commandsshow hostname

show hsrp bfd-sessionsshow hsrp bfd-sessions [interface interface-id [to {addr_v4 | addr_v6}]] [ipv4 | ipv6]


Hot Standby Router Protocol (HSRP) information.hsrp

BFD sessions.bfd-sessions

Interface.interface

The type is interface. Interface. The values are ethernet, port-channel, vlan.interface-id

To IP address.to

IPv4 destination address for BFD session. The type is ipaddr.addr_v4

IPv6 destination address for BFD session. The type is ipv6.addr_v6

IPv4 groups only.ipv4

IPv6 groups only.ipv6


S Commandsshow hsrp bfd-sessions

show hsrp delayshow hsrp delay [{interface interface-id}]



Groups on this interface.interface

The type is interface. Interface. The values are ethernet, port-channel, vlan.interface-id

Group initialisation delay.delay


S Commandsshow hsrp delay

show hsrp +show hsrp [{interface interface-id}] [{group group-number}] [{active | init | learn | listen | speak | standby}]+ [all] [{brief [all1]} | {stats}] [{ipv4 | ipv6}]



Groups on this interface.interface

The type is interface. Interface. The values are ethernet, port-channel,vlan.

interface-id

Groups in active state.active

Groups in init state.init

Groups in learn state.learn

Groups in listen state.listen

Groups in speak state.speak

Groups in standby state.standby

Group number.group

The type is integer. Group Number. The range is from 0 to 4095.group-number

Include groups in disabled state.all

Brief output.brief

HSRP packet stats output.stats

HSRP V4 Groups.ipv4

HSRP V6 Groups.ipv6

Brief output.all1


S Commandsshow hsrp +

show hsrp summaryshow hsrp summary



Show HSRP summary.summary


S Commandsshow hsrp summary

show interfaceshow interface [ arg0 ]


Interface.interface

Interface. The type is interface_mrange.arg0


S Commandsshow interface

show interface briefshow interface [ arg0 ] brief


Interface.interface


Show brief info of interface.brief


S Commandsshow interface brief

show interface capabilitiesshow interface [ arg0 ] capabilities


Interface.interface

Ethernet Interface. The type is interface_mrange. The values are ethernet.arg0

Show interface capabilities information.capabilities


S Commandsshow interface capabilities

show interface countersshow interface arg0 counters


Show interface status and information.interface

Interface. The type is interface_mrange. The values are ethernet, port-channel,vlan, mgmt, vfc, vfc-port-channel.

arg0

Show interface counters.counters


S Commandsshow interface counters

show interface countersshow interface counters [ { fex fex-id } | { module mod-id } ]




Enter fex ID.fex

Enter FEX number. The type is integer. The range is from 101 to 164.fex-id

Limit display to interfaces on module.module

Enter module number. The type is integer. The range is from 1 to 30.mod-id


S Commandsshow interface counters

show interface counters briefshow interface arg0 counters brief



Interface. The type is interface_mrange. The values are ethernet, port-channel,vfc, vfc-port-channel.

arg0


Show interface counters in brief.brief


S Commandsshow interface counters brief

show interface counters detailedshow interface [ arg0 ] counters detailed [ { all [ snmp ] } | snmp ]



Interface. The type is interface_mrange. The values are ethernet, port-channel,vlan, mgmt, vfc, vfc-port-channel.

arg0


Show only non-zero counters.detailed

Show every interface counter.all

Show SNMP MIB values.snmp


S Commandsshow interface counters detailed

show interface counters errorsshow interface arg0 counters errors



Interface. The type is interface_mrange. The values are ethernet, port-channel,mgmt.

arg0


Show interface error counters.errors


S Commandsshow interface counters errors

show interface counters errorsshow interface counters errors [ { fex fex-id } | { module mod-id } ]




Show interface error counters.errors

Enter fex ID.fex





S Commandsshow interface counters errors

show interface counters snmpshow interface arg0 counters snmp



Interface. The type is interface_mrange. The values are ethernet, port-channel,vlan, mgmt.

arg0




S Commandsshow interface counters snmp

show interface counters snmpshow interface counters snmp [ { fex fex-id } | { module mod-id } ]





Enter fex ID.fex





S Commandsshow interface counters snmp

show interface debounceshow interface [ arg0 ] debounce



Interface. The type is interface_mrange. The values are ethernet.arg0

Show interface debounce time information.debounce


S Commandsshow interface debounce

show interface descriptionshow interface [ arg0 ] description


Interface.interface


Show interface description.description


S Commandsshow interface description

show interface fex-fabricshow interface fex-fabric



Show all FEX fabric ports.fex-fabric


S Commandsshow interface fex-fabric

show interface flowcontrolshow interface arg0 flowcontrol



Interface. The type is interface_mrange. The values are ethernet, port-channel.arg0

Show interface flowcontrol information.flowcontrol


S Commandsshow interface flowcontrol

show interface flowcontrolshow interface flowcontrol [ { fex fex-id } | { module mod-id } ]



Show interface flowcontrol information.flowcontrol

Limit display to interfaces on a FEX.fex





S Commandsshow interface flowcontrol

show interface mac-addressshow interface [ arg0 ] mac-address



Interface. The type is interface_mrange. The values are ethernet, port-channel,vlan, mgmt.

arg0

Show interface MAC address.mac-address


S Commandsshow interface mac-address

show interface priority-flow-controlshow interface [ arg0 ] priority-flow-control [ details ]




Show interface PFC information.priority-flow-control

Show interface PFC detail information.details


S Commandsshow interface priority-flow-control

show interface snmp-ifindexshow interface snmp-ifindex



Show snmp ifindex list.snmp-ifindex


S Commandsshow interface snmp-ifindex

show interface statusshow interface arg0 status [ err-disabled | err-vlans ]



Interface. The type is interface_mrange. The values are ethernet,port-channel, vlan, mgmt, loopback, tunnel.

arg0

Show interface line status.status

Show interface error disabled state.err-disabled

Show errored vlans.err-vlans


S Commandsshow interface status

show interface statusshow interface status [ down | err-disabled | err-vlans | { fex fex-id } | inactive | { module mod-id } | up ]



Show interface line status.status

Show interface down state.down

Show interface error disabled state.err-disabled

Show errored vlans.err-vlans



Show interface inactive state.inactive



Show interface up state.up


S Commandsshow interface status

show interface switchportshow interface [ arg0 ] switchport




Show interface switchport information.switchport


S Commandsshow interface switchport

show interface transceivershow interface [ arg0 ] transceiver [ fex-fabric ] [ calibrations | details | sprom ]


Interface.interface


Transceiver Information.transceiver

Show FEX interface transceiver information.fex-fabric

Show interface transceiver calibration information.calibrations

Show interface transceiver detail information.details

Show interface transceiver sprom information.sprom


S Commandsshow interface transceiver

show interface trunkshow interface arg0 trunk




Show interface trunk information.trunk


S Commandsshow interface trunk

show interface trunkshow interface trunk [ { vlan vlan-id } | { fex fex-id } | { module mod-id } ]



Show interface trunk information.trunk





Show per vlan information for trunk.vlan

Enter vlan range. The type is integer_mrange. The range is from 1 to 4095.vlan-id


S Commandsshow interface trunk

show inventoryshow inventory [ chassis | fans | power_supply | {module [arg0]} ]


system inventory information.inventory

system inventory module information.module

system inventory fan information.fans

system inventory chassis information.chassis

system inventory power supply information.power_supply

please enter the module number. The type is integer. The range is from 1to 30.

arg0


S Commandsshow inventory

show ip arpshow ip arp [ { ip-address | detail | static | interface | { summary [interface] } | { statistics [ interface ] } }] [ { vrf { all | vrf-name } } ]



Display ARP table and statistics.arp

Display ARP statistics.statistics

Display Static ARP entries.static

Display ARP adjacency summary.summary



Display all VRFs.all

Name of the Interface. The type is interface.interface

Ip Address. The type is ipaddr.ip-address



S Commandsshow ip arp

show ip community-listshow ip community-list [ strarg ]



List community-list.community-list

Name of prefix list (Max Size 100). The type is string.strarg


S Commandsshow ip community-list

show ip dhcp clientshow ip dhcp client [ statistics [ { interface intfname } ] ]



Show items in DHCP.dhcp

DHCP client.client

Statistics related to DHCP.statistics

DHCP client address of the interface.interface

Slot/chassis number. The type is interface. The values are ethernet,port-channel, vlan, loopback.

intfname


S Commandsshow ip dhcp client

show ip dhcp global statisticsshow ip dhcp global statistics




DHCP global stats.global



S Commandsshow ip dhcp global statistics

show ip dhcp relayshow ip dhcp relay [ { { statistics [ { interface intfname } ] } | { address [ { detail | { interface intfname [detail ] } } ] } | { discover [ { interface intfname } ] } | detail } ]




DHCP Relay.relay

DHCP relay address.address

DHCP relay node discovery.discover


DHCP relay detailed information.detail

DHCP relay address of the interface.interface


intfname


S Commandsshow ip dhcp relay

show ip extcommunity-listshow ip extcommunity-list [ strarg ]



List extcommunity-list.extcommunity-list



S Commandsshow ip extcommunity-list

show ip igmp gipo joinsshow ip igmp gipo joins



Display IGMP status and configuration.igmp

Show IGMP gipo information.gipo

Show IGMP gipo Join Summary.joins


S Commandsshow ip igmp gipo joins

show ip igmp interfaceshow ip igmp interface [intf] [brief] [vrf {vrf-name | all}]


Show IP information.ip

IGMP protocol events.igmp

IGMP Interface.interface

Display neighbors on single interface name. The type is interface. The valuesare brief, ethernet, loopback, port-channel, tunnel, vlan, vrf.

intf

Display properties on single IGMP interface in brief.brief


VRF name (Max Size 32).vrf-name



S Commandsshow ip igmp interface

show ip igmp snoopingshow ip igmp snooping [ { vlan vlan } ] [ extended ]



Show IGMP information.igmp

IGMP Snooping information.snooping

Display Vlan IGMP snooping membership information.vlan

Display Extended Vlan IGMP snooping membership information.extended

Specify vlan-id. The type is integer. The range is from 1 to 4095.vlan


S Commandsshow ip igmp snooping

show ip igmp snooping explicit-trackingshow ip igmp snooping explicit-tracking [ { vlan vlan } ] [ encap ] [ extended ]





Display explicit-tracking database for IGMPv3.explicit-tracking

Display Vlan explicit-tracking database.vlan

Display Encap Vlan explicit-tracking database.encap

Display Extended Vlan explicit-tracking database.extended



S Commandsshow ip igmp snooping explicit-tracking

show ip igmp snooping groups + +show ip igmp snooping groups [ group | source ]+ [ { vlan vlan } ] [ encap ] [ extended ] [ detail | summary]+




Show IGMP Snooping information.snooping

Display snooping information for group address.groups

Multicast IP address of single group to display. The type is ipaddr.group

Source IP address. The type is ipaddr.source

Display detailed information for the group.detail

Display snooping group summary.summary

Display Vlan IGMP snooping membership information.vlan

Display Encap Vlan IGMP snooping membership information.encap

Display Extended Vlan IGMP snooping membership information.extended



S Commandsshow ip igmp snooping groups + +

show ip igmp snooping lookup-modeshow ip igmp snooping lookup-mode [ { vlan vlan } ] [ extended ]





IGMP Snooping lkup mode information.lookup-mode

Display Vlan information.vlan

Display Extended Vlan IGMP snooping lkup mode information.extended



S Commandsshow ip igmp snooping lookup-mode

show ip igmp snooping mroutershow ip igmp snooping mrouter [ { vlan vlan } ] [ encap ] [ extended ] [ detail ]





Display multicast routers detected.mrouter

Display detailed mrouter information.detail

Display Vlan multicast router information.vlan

Display Encap Vlan IGMP snooping mrouter information.encap

Display Extended Vlan IGMP snooping mrouter information.extended



S Commandsshow ip igmp snooping mrouter

show ip igmp snooping queriershow ip igmp snooping querier [ { vlan vlan } ] [ extended ] [ detail ]





Display snooping querier information.querier


Display Vlan IGMP snooping querier information.vlan

Display Extended Vlan IGMP snooping Querier information.extended



S Commandsshow ip igmp snooping querier

show ip igmp snooping statisticsshow ip igmp snooping statistics [ { vlan vlan } ] [ extended ] [ global ]





Display packet/error counter statistics.statistics

Display global statistics.global

Display vlan statistics.vlan

Display Extended Vlan IGMP snooping statistics information.extended



S Commandsshow ip igmp snooping statistics

show ip igmp vrf allshow ip igmp vrf all



Display IGMP status and configuration.igmp




S Commandsshow ip igmp vrf all

show ip interfaceshow ip interface [ {brief [include-secondary]} | interface | ip-addr ] [ operational ] [ { vrf { all | vrf-name} } ]



Display IP related interface information.interface


Display summary of all IP addresses.include-secondary

Display only interfaces that are administratively enabled.operational



Name of the Interface. The type is interface. The values are ethernet,port-channel, vlan, mgmt, loopback, tunnel.

interface

Ip Address. The type is ipaddr.ip-addr


Display interface for local IP address. The type is string.local-addr


S Commandsshow ip interface

show ip mrouteshow ip mroute [[detail] | {summary [count | software-forwarded | rpf-failed]} | { [{{group [source][shared-tree | source-tree] }}] {[flags] | [detail] | [summary [software-forwarded | rpf-failed]]}}] [vrf{vrf-name | all}]





Display IP multicast routing table.mroute

Display route counts and packet rates.summary

Display route for *,G entries.shared-tree

Display route for S,G entries.source-tree

Display software switched route counts only.software-forwarded

Display RPF failure statistics.rpf-failed




Display route counts only.count

Display detailed route attributes.detail

Display detailed route attributes.flags


S Commandsshow ip mroute

show ip ospf databaseshow ip ospf database [[[network | asbr-summary | summary | router | opaque-link | opaque-area |nssa-external] [{area area-id-ip}]] | {external [{ext_tag tag_val}]} | opaque-as] [lsid] [self-originated |{adv-router advid} | {adv-router-name adv-name} ] [vrf {vrf-name | all}]



Display OSPF status and configuration.ospf

Link-state Database Summary.database

Display network LSAs.network

Display type 4 (asbr-summary) LSAs.asbr-summary

Display type 3 (network-summary) LSAs.summary

Display router LSAs.router

Display Opaque Link-Local LSAs.opaque-link

Display Opaque Area LSAs.opaque-area

Display type 7 (NSSA external) LSAs.nssa-external

Display only LSA's in this area.area

The type is ipaddr. Area Id as an integer or ip address.area-id-ip

Display type 5 (external) LSAs.external

Restrict display by tag.ext_tag

The type is uinteger. 32-bit tag value.tag_val

Display Opaque AS LSAs.opaque-as

The type is ipaddr. Restrict display by link state ID.lsid

Display only self-originated LSAs.self-originated

Restrict display by Advertising router.adv-router

The type is ipaddr. Advertising router ID.advid

Restrict display by Advertising router name.adv-router-name


S Commandsshow ip ospf database

The type is string. DNS Name of the Advertising router.adv-name





S Commandsshow ip ospf database

show ip ospf database detailshow ip ospf database [[[network | asbr-summary | summary | router | opaque-link | opaque-area |nssa-external] [{area area-id-ip}]] | {external [{ext_tag tag_val}]} | opaque-as] [lsid] [self-originated |{adv-router advid} | {adv-router-name adv-name} ] detail [vrf {vrf-name | all}]






Display type 4 (asbr-summary) LSAs.asbr-summary

Display type 3 (network-summary) LSAs.summary


Display Opaque Link-Local LSAs.opaque-link

Display Opaque Area LSAs.opaque-area





Restrict display by tag.ext_tag


Display Opaque AS LSAs.opaque-as







S Commandsshow ip ospf database detail


Display LSA in detail.detail





S Commandsshow ip ospf database detail

show ip ospf interfaceshow ip ospf interface { arg0 | { [ brief ] vrf { all | vrf-name } } }


Ipv4.ip


OSPF enabled interface.interface


arg0

Display summary of OSPF interfaces.brief



VRF name (Max Size 32). The type is string.vrf-name


S Commandsshow ip ospf interface

show ip ospf neighborsshow ip ospf neighbors arg0 [ { ip [ detail ] } | detail | summary ] [vrf { all | vrf-name } ]


Ipv4.ip


Neighbor list.neighbors

Router ID of neighbor. The type is ipaddr.ip

Show detailed neighbor display.detail


arg0

Summary of neighbors.summary





S Commandsshow ip ospf neighbors

show ip ospf neighbors vrfshow ip ospf neighbors [ { ip [ detail ] } | detail | summary ] vrf { all | vrf-name }


Ipv4.ip










S Commandsshow ip ospf neighbors vrf

show ip ospf route vrfshow ip ospf route [ summary | { ippfx [ longer-prefixes ] [ summary ] } | ip ] vrf { all | vrf-name }


Ipv4.ip


Internal OSPF routes.route

Show single OSPF route. The type is ipaddr.ip

Show single exact match OSPF route. The type is ipprefix.ippfx

Show route counts.summary

Show exact match and more specific routes.longer-prefixes





S Commandsshow ip ospf route vrf

show ip ospf summary-address vrfshow ip ospf summary-address vrf { all | vrf-name }


Ipv4.ip


Summary-address redistribution information.summary-address





S Commandsshow ip ospf summary-address vrf

show ip ospf trafficshow ip ospf traffic { arg0 | { vrf { all | vrf-name } } }


Ipv4.ip


Packet counters.traffic


arg0





S Commandsshow ip ospf traffic

show ip ospf vrfshow ip ospf vrf { all | vrf-name }


Ipv4.ip






S Commandsshow ip ospf vrf

show ip pim group-rangeshow ip pim group-range [group] [vrf {vrf-name | all}]



Display PIM status and configuration.pim

Display the various group-ranges.group-range

IP address of the group to display. The type is ipaddr.group


The type is string. VRF name (Max Size 32).vrf-name



S Commandsshow ip pim group-range

show ip pim interfaceshow ip pim interface [intf] [brief] [vrf {vrf-name | all}]




Display PIM interface related information.interface

Display properties on single PIM interface. The type is interface. The values arebrief, ethernet, loopback, port-channel, tunnel, vlan, vrf.

intf

Display one line status per PIM interface.brief





S Commandsshow ip pim interface

show ip pim neighborshow ip pim neighbor {[interface] | [ipaddr]} [vrf {vrf-name | all}]




Display PIM neighbor related information.neighbor

Display neighbors on single interface name. The type is interface. The valuesare ethernet, loopback, port-channel, tunnel, vlan, vrf.

interface

IP address of single neighbor to display. The type is ipaddr.ipaddr





S Commandsshow ip pim neighbor

show ip pim oif-listshow ip pim oif-list group [source] [vrf {vrf-name | all}]




Display interfaces for oif-list of PIM route.oif-list

Group address to display. The type is ipaddr.group

Source address to display. The type is ipaddr.source





S Commandsshow ip pim oif-list

show ip pim routeshow ip pim route [{group [source]}] [vrf {vrf-name | all }]




Display PIM route cache.route







S Commandsshow ip pim route

show ip pim rpshow ip pim rp [group] [vrf {vrf-name | all}]




Display PIM RP, Auto-RP, and BSR related information.rp

Display RP for group address. The type is ipaddr.group





S Commandsshow ip pim rp

show ip pim statisticsshow ip pim statistics [vrf {vrf-name | all}]




Display PIM Statistics per-VRF.statistics





S Commandsshow ip pim statistics

show ip prefix-listshow ip prefix-list [ strarg ]



List IP prefix lists.prefix-list



S Commandsshow ip prefix-list

show ip processshow ip process [ { vrf { all | vrf-name } } ]



Display IP global information.process





S Commandsshow ip process

show ip routeshow ip route { { [ ip-addr | { ip-prefix [{longer-prefixes|shorter-prefixes}] } ] [ bgp | eigrp | ospf ] [ {next-hop nh } | { interface intf } | { updated { [ { since stime } ] [ { until utime } ] } } ]+ [ summary | detail] vrf {vrf-name | all} } | { vrf {vrf-name | all} [ ip-addr | { ip-prefix [{longer-prefixes|shorter-prefixes}] } ][ { next-hop nh } | { interface intf } | { updated { [ { since stime } ] [ { until utime } ] } } ]+ [ summary |detail ] } }



Display routing information.route

Display single route longest match lookup. The type is ipaddr.ip-addr

Display single exact match route. The type is ipprefix.ip-prefix

Display matching routes with mask-lengths >= prefix.longer-prefixes

Display matching routes with mask-lengths <= prefix.shorter-prefixes

Display routes with this next-hop only.next-hop

Next hop address. The type is ipaddr.nh

Display routes with this output interface only.interface

Interface Name. The type is interface.intf

Display routes filtered by last updated time.updated

Display those routes updated since this time.since

Since this date/time [[CC]YY-][MM-DD-]HH:MM[:SS]. The type is string.stime

Display those routes updated until this time.until

Until this date/time [[CC]YY-][MM-DD-]HH:MM[:SS]. The type is string.utime

Display route counts.summary

Display routes in full detail.detail



bgp


S Commandsshow ip route

ospf

eigrp



S Commandsshow ip route

show ip static-routeshow ip static-route [ { vrf { all | vrf-name } } ]



Display configured static routes.static-route





S Commandsshow ip static-route

show ipv6 dhcp relayshow ipv6 dhcp relay [ { statistics } | { address [ { detail | { interface intfname [ detail ] } } ] } ]




DHCP Relay.relay

DHCP relay address.address

DHCP relay detailed information.detail

DHCP relay address of the interface.interface


intfname



S Commandsshow ipv6 dhcp relay

show ipv6 icmp adjacencyshow ipv6 icmp adjacency [interface] [detail] [vrf {vrf-name | all}]



Display ICMPv6 information.icmp

Show IPv6 dynamic learnt adjacency entry.adjacency




Interface name to display. The type is interface.interface



S Commandsshow ipv6 icmp adjacency

show ipv6 icmp interfaceshow ipv6 icmp interface [interface] [detail] [vrf {vrf-name | all}]

Syntax Description Display information for all VRFs.all

Show running system information.show

Show IPv6 dynamic learnt adjacency entry.interface




Display ICMPv6 information.icmp




S Commandsshow ipv6 icmp interface

show ipv6 interfaceshow ipv6 interface [ {brief [include-secondary]} | interface | ipv6-addr ] [ { vrf { all | vrf-name } } ]



Display IPv6 related interface information.interface


Display summary of all IPv6 addresses.include-secondary

Display only interfaces that are administratively enabled.operational



Name of the Interface. The type is interface. The values are ethernet,port-channel, vlan, mgmt, loopback, vrf.

interface

Ipv6 Address. The type is ipv6.ipv6-addr


Display interface for local IPv6 address. The type is string.local-addr


S Commandsshow ipv6 interface

show ipv6 mld snoopingshow ipv6 mld snooping [ { vlan vlan } ]


Show IPv6 information.ipv6

Show MLD information.mld

MLD Snooping information.snooping

Display Vlan MLD snooping membership information.vlan



S Commandsshow ipv6 mld snooping

show ipv6 mld snooping explicit-trackingshow ipv6 mld snooping explicit-tracking [ { vlan vlan } ] [encap]





Display explicit-tracking database for MLDv2.explicit-tracking

Display Vlan explicit-tracking database.vlan

Display Encap Vlan explicit-tracking database.encap



S Commandsshow ipv6 mld snooping explicit-tracking

show ipv6 mld snooping groupsshow ipv6 mld snooping groups [ { [ group ] [ source ] } [ { vlan vlan } ] ] [ detail | summary] [ encap ]




Show MLD Snooping information.snooping

Display snooping information for group address.groups

Multicast IP address of single group to display. The type is ipv6.group

Source IP address. The type is ipv6.source

Display detailed information for the group.detail

Display snooping group summary.summary

Display Vlan MLD snooping membership information.vlan

Display Encap Vlan MLD snooping membership information.encap



S Commandsshow ipv6 mld snooping groups

show ipv6 mld snooping lookup-modeshow ipv6 mld snooping lookup-mode [ { vlan vlan } ]





MLD Snooping lkup mode information.lookup-mode

Display Vlan information.vlan



S Commandsshow ipv6 mld snooping lookup-mode

show ipv6 mld snooping mroutershow ipv6 mld snooping mrouter [ { vlan vlan } ] [detail] [encap]





Display multicast routers detected.mrouter

Display detailed mrouter information.detail

Display Vlan multicast router information.vlan

Display Encap Vlan MLD snooping membership information.encap



S Commandsshow ipv6 mld snooping mrouter

show ipv6 mld snooping queriershow ipv6 mld snooping querier [ { vlan vlan } ] [detail]





Display snooping querier information.querier


Display Vlan MLD snooping querier information.vlan



S Commandsshow ipv6 mld snooping querier

show ipv6 mld snooping statisticsshow ipv6 mld snooping statistics [global | { vlan vlan } ]





Display packet/error counter statistics.statistics

Display global statistics.global

Display vlan statistics.vlan



S Commandsshow ipv6 mld snooping statistics

show ipv6 nd interfaceshow ipv6 nd interface [interface] [detail] [prefix] [vrf {vrf-name | all}]

Syntax Description Display information for all VRFs.all

Show running system information.show

Show IPv6 dynamic learnt adjacency entry.interface


Display List of ICMPv6 RA prefix.prefix



Display NDinformation.nd




S Commandsshow ipv6 nd interface

show ipv6 prefix-listshow ipv6 prefix-list [ strarg ]



List IPv6 prefix lists.prefix-list



S Commandsshow ipv6 prefix-list

show ipv6 processshow ipv6 process [ { vrf { all | vrf-name } } ]


Display IP information.ipv6

Display IP global information.process





S Commandsshow ipv6 process

show ipv6 route + vrfshow ipv6 route [ ipv6-addr | { ipv6-prefix [{longer-prefixes|shorter-prefixes}] } ] [ bgp | eigrp | ospf ] [{ next-hop next-hop } | { interface interface } | { updated { [since stime ] [until utime] } } ]+ [ summary |detail ] vrf {vrf-name | all}



Display routing information.route

Display single route longest match lookup. The type is ipv6.ipv6-addr

Display single exact match route. The type is ipv6_prefix.ipv6-prefix

Display matching routes with mask-lengths >= prefix.longer-prefixes

Display matching routes with mask-lengths <= prefix.shorter-prefixes

Display routes with this next-hop only.next-hop

Next hop address. The type is ipv6.next-hop

Display routes with this output interface only.interface

Interface Name. The type is interface.interface

Display routes filtered by last updated time.updated

Display those routes updated since this time.since

Since this date/time [[CC]YY-][MM-DD-]HH:MM[:SS]. The type is string.stime

Display those routes updated until this time.until

Until this date/time [[CC]YY-][MM-DD-]HH:MM[:SS]. The type is string.utime

Display route counts.summary

Display routes in full detail.detail



bgp

ospf


S Commandsshow ipv6 route + vrf

eigrp



S Commandsshow ipv6 route + vrf

show ipv6 static-routeshow ipv6 static-route [ { vrf { all | vrf-name } } ]



Display configured static routes.static-route





S Commandsshow ipv6 static-route

show isis adjacency vrfshow isis adjacency [{system-id sid}] [interface] [detail] vrf { all | vrf-name }


Display IS-IS status and configuration.isis

Display IS-IS adjacency information.adjacency

IS-IS interface. The type is interface. The values are ethernet.interface

Hostname or System ID.system-id

Hostname or System ID (in the form of XXXX.XXXX.XXXX). The type isstring.

sid

Display IS-IS detail adjacency information.detail

VRF name.vrf


Specify VRF Name. The type is string.vrf-name


S Commandsshow isis adjacency vrf

show isis database vrfshow isis database [level-1|l1] [lid] vrf { all | vrf-name }



Display IS-IS database information.database

Display IS-IS Level-1 routing link state database.level-1

Display IS-IS Level-1 routing link state database.l1

LSP ID in the form of XXXX.XXXX.XXXX.XX-XX. The type is lsp_id.lid

VRF name.vrf




S Commandsshow isis database vrf

show isis dteps vrfshow isis dteps vrf { all | vrf-name }



ISIS Dynamic Tunnel EndPoint database.dteps

VRF name.vrf




S Commandsshow isis dteps vrf

show isis interface vrfshow isis interface [ brief | intf_arg ] [level-1] vrf { all | vrf-name }



Display IS-IS interface information.interface

Display Level-1 interfaces.level-1

Brief display of IS-IS interfaces.brief

IS-IS interface. The type is interface. The values are ethernet.intf_arg

VRF name.vrf




S Commandsshow isis interface vrf

show isis protocol vrfshow isis protocol vrf { all | vrf-name }



Display IS-IS process information.protocol

VRF name.vrf




S Commandsshow isis protocol vrf

show isis route vrfshow isis route vrf { all | vrf-name }



Display IS-IS route information.route

VRF name.vrf




S Commandsshow isis route vrf

show isis statistics vrfshow isis statistics vrf { all | vrf-name }



Display IS-IS protocol statistics.statistics

VRF name.vrf




S Commandsshow isis statistics vrf

show isis traffic vrfshow isis traffic [interface] vrf { all | vrf-name }



Display IS-IS traffic information.traffic

IS-IS interface. The type is interface. The values are ethernet.interface

VRF name.vrf




S Commandsshow isis traffic vrf

show lacp countersshow lacp counters [ { interface arg0 } ]


LACP protocol.lacp

LACP counters.counters

Specify a port-channel.interface

Port Channel interface. The type is interface_mrange. The values areport-channel.

arg0


S Commandsshow lacp counters

show lacp interfaceshow lacp interface arg0


LACP protocol.lacp

Specify an interface.interface

Interface. The type is interface. The values are ethernet.arg0


S Commandsshow lacp interface

show lacp neighborshow lacp neighbor [ { interface arg0 } ]


LACP protocol.lacp

LACP interface neighbor.neighbor



arg0


S Commandsshow lacp neighbor

show lacp port-channelshow lacp port-channel [ { interface arg0 } ]


LACP protocol.lacp

LACP port-channels.port-channel



arg0


S Commandsshow lacp port-channel

show lacp system-identifiershow lacp system-identifier


LACP protocol.lacp

Show system-identifier information.system-identifier


S Commandsshow lacp system-identifier

show lldp dcbx interfaceshow lldp dcbx interface if0


Show information about lldp.lldp

Show dcbx information.dcbx

show lldp interface information.interface

The type is interface. Enter interface. The values are ethernet.if0


S Commandsshow lldp dcbx interface

show lldp entryshow lldp entry [ sys-name ]



Show lldp entry information.entry

Peer's System name. The type is string.sys-name


S Commandsshow lldp entry

show lldp interfaceshow lldp interface arg0



Show lldp interface information.interface



S Commandsshow lldp interface

show lldp neighborsshow lldp neighbors [ { interface arg0 } ] [ detail ]



Show lldp neighbor information.neighbors

Show lldp neighbor information on an interface.interface


Show lldp neighbor detail information.detail


S Commandsshow lldp neighbors

show lldp timersshow lldp timers



Show lldp timers.timers


S Commandsshow lldp timers

show lldp tlv-selectshow lldp tlv-select



Show lldp tlv-select.tlv-select


S Commandsshow lldp tlv-select

show lldp trafficshow lldp traffic [ { interface arg0 } ]



Show lldp counters.traffic

Show lldp interface information.interface



S Commandsshow lldp traffic

show locator-led statusshow locator-led status


Blink locator led on device.locator-led

Status.status


S Commandsshow locator-led status

show logging ip access-list cacheshow logging ip access-list cache { permit | deny }


logging information.logging

IP configuration.ip

Access-list.access-list

show entries in ACLLOG cache.cache

action is permit.permit

action is deny.deny


S Commandsshow logging ip access-list cache

show logging ip access-list drop-codesshow logging ip access-list drop-codes



IP configuration.ip


Drop Codes.drop-codes


S Commandsshow logging ip access-list drop-codes

show logging ip access-list spanshow logging ip access-list span



IP configuration.ip


show entries in ACLLOG span.span


S Commandsshow logging ip access-list span

show mac address-table +showmac address-table [ { static | dynamic } ] [ {addressmac-addr} | {vlan id} | {interface interface-name}]+


Mac addr information.mac

MAC Address Table.address-table

Display Static Entries.static

Display Dynamic Entries.dynamic

address.address1

VLAN.vlan1

address.address

Interface.interface

VLAN.vlan

MAC Address. The type is ethernet.mac-addr

VLAN ID. The type is integer. The range is from 1 to 4095.id

Interface name. The type is interface.interface-name


S Commandsshow mac address-table +

show moduleshow module [arg0]


Module.module

please enter the module number. The type is integer. The range is from 1 to30.

arg0


S Commandsshow module

show module fexshow module fex {all | fexid}


Show module information.module

Show fex module information.fex


Show information for all FEX.all


S Commandsshow module fex

show npv external-interface-usageshow npv external-interface-usage [ { server-interface arg0 } ]


Show Npv information.npv

Show external interface usage by server interfaces.external-interface-usage

Show external interface usage by a server interface.server-interface

Interface. The type is interface. The values are vfc, vfc-port-channel.arg0


S Commandsshow npv external-interface-usage

show npv flogi-tableshow npv flogi-table [ { vsan vsan-id } ]



Show information about FLOGI sessions.flogi-table

Show information about FLOGI sessions for a VSAN.vsan

Vsan-id. The type is integer_range. The range is from 1 to 4093.vsan-id


S Commandsshow npv flogi-table

show npv flogi-table interfaceshow npv flogi-table interface arg0



Show information about FLOGI sessions.flogi-table

Show information about FLOGI sessions for a server interface.interface



S Commandsshow npv flogi-table interface

show npv statusshow npv status [ { vsan vsan-id } ]



Show Npv Status.status

Show NPV status for a specific VSAN.vsan

Vsan-id. The type is integer_range. The range is from 1 to 4093.vsan-id


S Commandsshow npv status

show npv traffic-mapshow npv traffic-map [ { server-interface arg0 } ]



Show information about Traffic Map.traffic-map

Show information about Traffic map for a server interface.server-interface



S Commandsshow npv traffic-map

show ntp authentication-keysshow ntp authentication-keys


Show NTP information.ntp

Display authentication keys.authentication-keys


S Commandsshow ntp authentication-keys

show ntp authentication-statusshow ntp authentication-status



NTP Authentication Status.authentication-status


S Commandsshow ntp authentication-status

show ntp peer-statusshow ntp peer-status



Show the status for all the server/peers.peer-status


S Commandsshow ntp peer-status

show ntp peersshow ntp peers



Show all the peers..peers


S Commandsshow ntp peers

show ntp statistics peer ipaddrshow ntp statistics peer ipaddr arg0



Show the NTP statistics.statistics

Show the per-peer statistics counter of a peer..peer

Peer's IP address.ipaddr

The type is string. A.B.C.D.arg0


S Commandsshow ntp statistics peer ipaddr

show ntp trusted-keysshow ntp trusted-keys



Display trusted keys.trusted-keys


S Commandsshow ntp trusted-keys

show ospfv3 databaseshow ospfv3 [{vrf {vrf-name | all}}] database [[[[router | network | intra-area-prefix | {inter-area {irouter| iprefix}} | nssa-external | area-unknown | [[{link | link-unknown | grace} [interface]]]][{area area-id-ip}]]| {external [{tag tag_val}]} | as-unknown] [lsid] [self-originated | {adv-router advid} | {adv-router-nameadv-name} ]] [{vrf {vrf-name | all}}]


Display OSPFv3 status and configuration.ospfv3




Display Intra-Area-Prefix LSAs.intra-area-prefix

Display inter-area LSAs.inter-area

Display Inter-Area-Router LSAs.irouter

Display Inter-Area-Prefix LSAs.iprefix


Display area-scope unknown LSAs.area-unknown

Display Link LSAs.link

Display link-scope unknown LSAs.link-unknown

Display Grace LSAs.grace

The type is interface. Display only LSA's on this Interface.interface




Restrict display by tag.tag


Display as-scope unknown LSAs.as-unknown



S Commandsshow ospfv3 database










S Commandsshow ospfv3 database

show ospfv3 database detailshow ospfv3 [{vrf {vrf-name | all}}] database [[[[router | network | intra-area-prefix | {inter-area {irouter| iprefix}} | nssa-external | area-unknown | [[{link | link-unknown | grace} [interface]]]][{area area-id-ip}]]| {external [{tag tag_val}]} | as-unknown] [lsid] [self-originated | {adv-router advid} | {adv-router-nameadv-name} ]] detail [{vrf {vrf-name | all}}]






Display Intra-Area-Prefix LSAs.intra-area-prefix

Display inter-area LSAs.inter-area

Display Inter-Area-Router LSAs.irouter

Display Inter-Area-Prefix LSAs.iprefix


Display area-scope unknown LSAs.area-unknown

Display Link LSAs.link

Display link-scope unknown LSAs.link-unknown

Display Grace LSAs.grace

The type is interface. Display only LSA's on this Interface.interface




Restrict display by tag.tag


Display as-scope unknown LSAs.as-unknown



S Commandsshow ospfv3 database detail






Display LSA in detail.detail





S Commandsshow ospfv3 database detail

show ospfv3 interfaceshow [ipv6] ospfv3 interface { arg0 | { [ brief ] vrf { all | vrf-name } } }




OSPFv3 enabled interface.interface


arg0

Display summary of OSPFv3 interfaces.brief





S Commandsshow ospfv3 interface

show ospfv3 neighborsshow [ipv6] ospfv3 neighbors arg0 [ { ip [ detail ] } | detail | summary ] [vrf { all | vrf-name } ]








arg0






S Commandsshow ospfv3 neighbors

show ospfv3 neighbors vrfshow [ipv6] ospfv3 neighbors [ { ip [ detail ] } | detail | summary ] vrf { all | vrf-name }












S Commandsshow ospfv3 neighbors vrf

show ospfv3 route vrfshow [ipv6] ospfv3 route [ summary | { ipv6-prefix [ longer-prefixes ] [ summary ] } | ipv6-addr ] vrf {all | vrf-name }




Internal OSPFv3 routes.route

Show single OSPFv3 route. The type is ipv6.ipv6-addr

Show single exact match OSPFv3 route. The type is ipv6_prefix.ipv6-prefix

Show route counts.summary

Show exact match and more specific routes.longer-prefixes





S Commandsshow ospfv3 route vrf

show ospfv3 summary-address vrfshow [ipv6] ospfv3 summary-address vrf { all | vrf-name }




Summary-address redistribution information.summary-address





S Commandsshow ospfv3 summary-address vrf

show ospfv3 trafficshow [ipv6] ospfv3 traffic { arg0 | { vrf { all | vrf-name } } }




Packet counters.traffic


arg0





S Commandsshow ospfv3 traffic

show ospfv3 vrfshow [ipv6] ospfv3 vrf { all | vrf-name }








S Commandsshow ospfv3 vrf

show port-channel capacityshow port-channel capacity


Show port-channel information.port-channel

Capacity information.capacity


S Commandsshow port-channel capacity

show port-channel databaseshow port-channel database [ { interface if0 } ]



Show port-channel database.database


. The type is interface_mrange. The values are port-channel.if0


S Commandsshow port-channel database

show port-channel extendedshow port-channel extended [ { interface if0 } ]



Show port-channel extended.extended


. The type is interface. The values are port-channel.if0


S Commandsshow port-channel extended

show port-channel summaryshow port-channel summary [ { interface if0 } ]



Show port-channel summary.summary




S Commandsshow port-channel summary

show port-channel trafficshow port-channel traffic [ { interface if0 } ]



Show port-channel traffic statistics.traffic




S Commandsshow port-channel traffic

show port-channel usageshow port-channel usage



Show port-channel number usage.usage


S Commandsshow port-channel usage

show porttrackshow porttrack


Port Tracking.porttrack


S Commandsshow porttrack

show processesshow processes


Show processes.processes


S Commandsshow processes

show processes cpushow processes cpu



Show processes CPU Info.cpu


S Commandsshow processes cpu

show processes cpu sortshow processes cpu sort



Show processes CPU Info.cpu

Show processes CPU Info (Sorted by Cpu Util).sort


S Commandsshow processes cpu sort

show processes memoryshow processes memory



Show processes Memory Info.memory


S Commandsshow processes memory

show radius-servershow radius-server [sorted | {groups [grp-name]}]


Radius-server.radius-server

Sorted server list.sorted

Radius server groups.groups

Group Name. The type is string.grp-name


S Commandsshow radius-server

show redundancy statusshow redundancy status


Show system redundancy status.redundancy

Current redundancy status.status


S Commandsshow redundancy status

show route-mapshow route-map [ strarg ]


Route-map information.route-map

Route-map name (Max Size 100). The type is string.strarg


S Commandsshow route-map

show san-port-channel databaseshow san-port-channel database


Show san-port-channel information.san-port-channel

Show san-port-channel database.database


S Commandsshow san-port-channel database

show san-port-channel summaryshow san-port-channel summary



Show san-port-channel summary.summary


S Commandsshow san-port-channel summary

show san-port-channel usageshow san-port-channel usage



Show san-port-channel usage.usage


S Commandsshow san-port-channel usage

show service copy infoshow service copy info [ { group [ gid ] } | { destination [ { ip dip | dipv6 } { vnid dvnid | dvnidhex } ] } ]


Display service information.service

Display service copy information.copy

Display service copy information.info

Display group information.group

Display destination information.destination

ip address of destination.ip

ipv6 address of destination.ipv6

vnid address of destination.vnid

group number. The type is integer. The range is from 0 to 65535.gid

The type is ipaddr. IP address.dip

The type is ipv6. IPv6 address.dipv6

vnid number. The type is integer.dvnid

vnid number. The type is hex.dvnidhex


S Commandsshow service copy info

show service redir infoshow service redir info [ { group [ gid ] } | { destination [ { ip dip | dipv6 } { vnid dvnid | dvnidhex } ] } ]


Display service information.service

Display service redirect information.redir

Display service redirect information.info

Display group information.group

Display destination information.destination

ip address of destination.ip

vnid address of destination.vnid

group number. The type is integer. The range is from 0 to 65535.gid

The type is ipaddr. IP address.dip

The type is ipv6. IPv6 address.dipv6

vnid number. The type is hex.dvnidhex

vnid number. The type is integer.dvnid


S Commandsshow service redir info

show snmpshow snmp


Display SNMP information.snmp


S Commandsshow snmp

show snmp communityshow snmp community



Display SNMP Community information.community


S Commandsshow snmp community

show snmp contextshow snmp context



Display SNMP Context information.context


S Commandsshow snmp context

show snmp engineIDshow snmp engineID



Show snmp engineID.engineID


S Commandsshow snmp engineID

show snmp hostshow snmp host

Syntax Description Show commands.show

Show snmp internal information.snmp

show snmp hosts.host


S Commandsshow snmp host

show snmp summaryshow snmp summary



Display SNMP Summary.summary


S Commandsshow snmp summary

show snmp usershow snmp user



Display SNMP User information.user


S Commandsshow snmp user

show spromshow sprom { backplane | { module arg1 } | { fan arg0 } | { powersupply arg2 } | sup | stby-sup | all }


show SPROM contents.sprom

show all sproms contents.all

show powersupply sprom contents.powersupply

show linecard module sprom contents.module

show fan module sprom contents.fan

show stanby supervisor sprom contents.stby-sup

show supervisor sprom contents.sup

show backplane clock module sprom contents.backplane

please enter the fan number. The type is integer. The range is from 1 to 15.arg0


arg1

please enter the powersupply number. The type is integer. The range is from1 to 10.

arg2


S Commandsshow sprom

show switchnameshow switchname


Show the system's hostname.switchname


S Commandsshow switchname

show system error-idshow system error-id { list | i0 }


System-related show commands.system

Show description about errors.error-id

Show description about all error IDs.list

The type is hex. Show description about specific error. The range is from 0x0 to0xffffffff.

i0


S Commandsshow system error-id

show system redundancy statusshow system redundancy [ ha ] status



Show system redundancy status.redundancy

Current redundancy status.status

Vdc redundancy status.ha


S Commandsshow system redundancy status

show system reset-reasonshow system reset-reason [ { module arg0 } ]



Show last reset reason.reset-reason

Module.module

please enter the module number. The type is integer. The range is from 1to 30.

arg0


S Commandsshow system reset-reason

show system reset-reason fexshow system reset-reason fex fexid



Show last reset reason.reset-reason

Show fex last reset reason.fex



S Commandsshow system reset-reason fex

show system resourcesshow system resources



Show system resources.resources


S Commandsshow system resources

show system uptimeshow system uptime


System information.system

How long the system has been up.uptime


S Commandsshow system uptime

show tacacs-servershow tacacs-server [sorted | {groups [grp-name]}]


Tacacs-server.tacacs-server

Sorted server list.sorted

Tacacs server groups.groups

Group Name. The type is string.grp-name


S Commandsshow tacacs-server

show usersshow users


Show users logged onto the system and their sessions.users


S Commandsshow users

show versionshow version


Show running firmware version and basic system information.version


S Commandsshow version

show version moduleshow version module [arg0]


Show the software version.version

Module.module


arg0


S Commandsshow version module

show vlanshow vlan [extended]


VLAN status.vlan

VLAN extended info like encaps.extended


S Commandsshow vlan

show vlan all-portsshow vlan all-ports


VLAN status.vlan

Show all ports on VLAN.all-ports


S Commandsshow vlan all-ports

show vlan briefshow vlan brief


VLAN status.vlan

All VLAN status in brief.brief


S Commandsshow vlan brief

show vlan fcoeshow vlan fcoe [ vlan-id ]


VLAN status.vlan

FCOE Configuration.fcoe

VLAN ID 1-3967 or range(s): 1-5, 10 or 2-5,7-19. The type is integer_mrange.The range is from 1 to 4095.

vlan-id


S Commandsshow vlan fcoe

show vlan idshow vlan id vlan-id [extended]


VLAN status.vlan

VLAN status by VLAN id.id

VLAN ID 1-3967 or range(s): 1-5, 10 or 2-5,7-19. The type is integer_mrange.The range is from 1 to 4095.

vlan-id



S Commandsshow vlan id

show vlan reservedshow vlan reserved [extended]


VLAN status.vlan

reserved



S Commandsshow vlan reserved

show vlan summaryshow vlan summary


VLAN status.vlan

VLAN summary information.summary


S Commandsshow vlan summary

show vpcshow vpc [ { vpc-number | { brief [ { vpc vpc-number } ] } | { extended [ { vpc vpc-number } ] } } ]


Virtual Port Channel configuration.vpc

Brief display of vPC status.brief

Extended display of vPC status.extended

Enter a Virtual Port Channel number. The type is integer. to 4096. The rangeis from 1

vpc-number


S Commandsshow vpc

show vpc consistency-parametersshow vpc consistency-parameters { global | { interface if } | { vpc vpc-num } }



Show vPC Consistency Parameters.consistency-parameters

Global Parameters.global

Specify interface.interface

. The type is interface. The values are port-channel.if

Enter a Virtual Port Channel number. The type is integer. to 4096. Therange is from 1

vpc-num


S Commandsshow vpc consistency-parameters

show vpc peer-keepaliveshow vpc peer-keepalive



vPC keepalive status.peer-keepalive


S Commandsshow vpc peer-keepalive

show vpc roleshow vpc role



vPC role status.role


S Commandsshow vpc role

show vpc statistics peer-keepaliveshow vpc statistics peer-keepalive



Statistics.statistics

peer keepalive module related statistics.peer-keepalive


S Commandsshow vpc statistics peer-keepalive

show vpc statistics vpcshow vpc statistics vpc vpc_num



Statistics.statistics

Enter a Virtual Port Channel number. The type is integer. to 4096. The rangeis from 1

vpc_num


S Commandsshow vpc statistics vpc

show vrfshow vrf [vrf-name | all] [detail [extended]] [{order id}]


Display VRF information.vrf

VRF name. The type is vrf_name.vrf-name

Display VRF information for all VRFs.all

Specify ordering.order

Order by ID.id

Display VRF detail information.detail

Display extended VRF information.extended


S Commandsshow vrf

show vrf interfaceshow vrf [vrf-name | all ] interface [interface]


Display VRF information.vrf

VRF name. The type is vrf_name.vrf-name

Display VRF information for all VRFs.all

Display interface VRF information.interface

Display interface VRF information. The type is interface.interface


S Commandsshow vrf interface

show vsanshow vsan [ vsan-id ]


Show vsan information.vsan

VSAN is range <1-4078>. The type is integer_range. The range is from 1 to4078.

vsan-id


S Commandsshow vsan

show vsan membershipshow vsan [ vsan-id ] membership



Show membership information.membership

VSAN is range <1-4078>. The type is integer_range. The range is from 1to 4078.

vsan-id


S Commandsshow vsan membership

show vsan membership interfaceshow vsan membership interface { arg0 }



Show membership information.membership

Show membership information for interface(s).interface



S Commandsshow vsan membership interface

show vsan usageshow vsan usage



Show vsan usage in the system.usage


S Commandsshow vsan usage

show zoning-filtershow zoning-filter [ { filter id } ]


Display Zoning-Filter information.zoning-filter

Display Zoning-Filter information using this Filter.filter

Filter ID/string. The type is string.id


S Commandsshow zoning-filter

show zoning-rule +show zoning-rule [ { src-epg epg0 } | { dst-epg epg1 } | { scope scopeId } | { filter filt } ]+


Display Zoning-Rule information.zoning-rule

Display Source EPG information.src-epg

Source EPG number. The type is integer. The range is from 0 to 65535.epg0

Display Destination EPG information.dst-epg

Destination EPG number. The type is integer. The range is from 0 to 65535.epg1

Display Rules for this Scope.scope

Scope ID. The type is integer. The range is from 1 to 16777215.scopeId

Display Rules using this Filter.filter

Filter ID/string. The type is string.filt


S Commandsshow zoning-rule +


S Commandsshow zoning-rule +

S Commands - Cisco - Global Home Page · S Commands • setinservice, page 9 • show, page 10 •...

Documents

Transcript of S Commands - Cisco - Global Home Page · S Commands • setinservice, page 9 • show, page 10 •...