S 51193 PaperJack RZ EN 2 - STIHL
2
M3 M4 M1 M1 M2 M2 Chain saw AL4 R1 R2 R3 K5 K6 R4 R4 R3 R2 R1 AL5 AR4 AR5 Body M3 M4 B2 B3 Arm right AR1 AR2 AR2 AR3 AR3 AR4 AR5 AR1 Arm left AL1 AL2 AL2 AL3 AL3 AL4 AL5 AL1 STIHL-PaperJack No glue or tape necessary – all the parts can simply be tucked into each other. Have scissors and a box cutter ready: 1. Download the crafting template for forestry worker Jack and and print it out on A4 paper - somewhat thicker paper 2. Carefully cut out all seven patterns on both sides. 3. Fold and crease along the dotted white lines. 4. Cut along all the yellow lines using a box cutter. 5. Stick the light grey flaps into the slits with the matching label (for example, put the AL1 flap into 7. Put the seven individual patterns together: simply tuck the flaps into the slits with the respective label. Done! Have fun with Paper Jack! if possible (paper with 200 g/m2 is ideal). the AL1 slit).
Transcript of S 51193 PaperJack RZ EN 2 - STIHL
M3
M4
M1
M1
M2
M2
Chain saw
AL4
R1
R2 R3
K5 K6
R4
R4R3
R2
R1
AL5
AR4
AR5
Body
M3
M4
B2 B3
Arm right
AR1
AR2AR2
AR3
AR3
AR4AR5
AR1
Arm left
AL1
AL2 AL2
AL3
AL3
AL4 AL5
AL1STIHL-PaperJack
No glue or tape necessary – all the parts can simply be tucked into each other. Have scissors and a box cutter ready:
1. Download the crafting template for forestry worker Jack and and print it out on A4 paper - somewhat thicker paper
2. Carefully cut out all seven patterns on both sides.
3. Fold and crease along the dotted white lines.
4. Cut along all the yellow lines using a box cutter.
5. Stick the light grey flaps into the slits with the matching label (for example, put the AL1 flap into
7. Put the seven individual patterns together: simply tuck the flaps into the slits with the respective label.
Done!
Have fun with Paper Jack!
if possible (paper with 200 g/m2 is ideal).
the AL1 slit).
K1 K1
K2
K3
K4
K5
K6
K7
K7
K6
K5 K6K5
K4
K3
K2
Head
Helmet visor – please insert H1, H2 and H3 in the
slots above the face.
H1H2 H3
Legs
B1
B2 B3
B1
