RZ-4 Advanced

Innovation for better mobilityInnovation for better mobility

The industry’s most advanced video detection cameraThe RZ-4 Advanced WDR (RZ-4A WDR) is Iteris’ premium video detection camera. Optimized for traffic video detection, the RZ-4A WDR combines Iteris’ best-in-class all-weather performance video detection with Wide Dynamic Range (WDR) technology – using the advanced imager technology to handle extremes in light, dark, and severe glare conditions. In harsh backlit conditions, vehicles can be detected with >100dB of dynamic range; the camera can handle the most complicated scene. The RZ-4A WDR’s simple installation, backward compatibility, and the capability to adjust the camera from the cabinet provides an advanced, easy-to-use solution for video vehicle detection.

RZ-4 Advanced™ WDRAdvanced video detection enhanced with

wide dynamic range technology

The RZ-4A WDR detects vehicles in any lighting and weather conditions. In contrast to other CCTV type or thermal imaging cameras, the RZ-4A WDR delivers a video signal that is optimized for processing by the Vantage® video detection systems.

Bid 09-16 Exhibit B1

Innovation for better mobility

RZ-4 Advanced™ WDRAdvanced video detection enhanced with

wide dynamic range technologyBenefits

SpecificationsImager 811 x 508 effective pixels

540 TV lines minimum Automatic white balance >50 dB S/N ratioDynamic range >100 dB .003 lux capable 3D-DNR Noise Reduction

Lens Focal length and focus adjustable at the rear of housing for a horizontal field of view ranging from 4.5°tele to 48° wide12x zoom

Focus Adjustable/auto focus Connections Terminal block type connection Physical Dimensions 17” (43.2cm) long x 5” (12.7cm) diameter (without

mounting bracket) Weight 5.7 pounds (2.6 Kg), including camera, lens, using,

sunshield, and mounting bracket EnvironmentTemperature –31° F to +165° F (–35° C to +74° C)Humidity 0% to 100% Vibration 0.5G, 3 axes, 5-30 HzShock 10G in all 3 axesPowerStandard 115/230 VAC (5W typical, 25W max.) 50/60 Hz Heater Indium Tin Oxide, proportional power

Easy to install and maintainThe RZ-4A WDR camera also has the capability to set up the field of view (FOV) from the bucket truck or from the ground at the cabinet.

ISO 9001:2008

Copyright © 2015 Iteris, Inc. All rights reserved.

NOTICE: Iteris, Inc. reserves the right to change product specifications without notice. Information furnished is for informational purposes only. This information may not be complete or the latest revision. For the most up-to-date information, please contact Iteris, Inc.

Sept 2015 ver3www.iteris.com

• Specifically designed for vehicle andbicycle detection applications

• Improved color and clarity of the videoimage, ideal for connection to a VantageEdgeConnect™

• Quick-Click connectors and adjustablecamera mount streamline installationand minimize setup time - no crimpingtools required!

• Set up and configure at the camera orfrom the ground using the AdvancedLens Adjustment Module (soldseparately).

• Cable termination located at the rear ofthe camera simplifies cable connection

• Performs in the most challenginglighting conditions

• Advanced heater enables optimal videodetection performance in adverseweather conditions.

• Advanced self-cleaning lens ensures lower camera maintenance.

Iteris Resource Center AppAccess Iteris product support documentation, specifications, and much more.


https://itunes.apple.com/nl/artist/iteris-inc./id520177092?l=en

https://itunes.apple.com/nl/artist/iteris-inc./id520177092?l=en

https://play.google.com/store/apps/developer?id=Iteris,+Inc.&hl=en

https://play.google.com/store/apps/developer?id=Iteris,+Inc.&hl=en


Superior performance for the toughest environmentMany traffi c management agencies using span-wire mounted signals have not previously been able to widely deploy video vehicle detec on, as it has tradi onally been mounted on rigid traffi c signal mast arms. Un l now, span-wire mounted cameras provided tough challenges for image processing algorithms, due to uncontrolled and random camera movement.

As the global leader in video vehicle detec on, Iteris provides SmartSpan with Dynamic Zone Stabiliza on (DZS) algorithms. With DZS, camera movement is tracked and compensated to provide accurate stop-bar and advanced detec on, as well as fi eld proven Vantage® traffi c data collec on in a single solu on.

S S ®

All the power of Iteris video detection for span-wire applications

Simple to install and set upBoth experienced and new users of video detec on will fi nd the installa on and confi gura on of SmartSpan to be simple and quick. The system may be rack or shelf mounted inside a traffi c cabinet, and is NEMA and Type 170/2070/ATC traffi c controller compa ble. The system has the capability to perform well in either isolated or networked intersec ons.

Video-based stop-bar, advanced detec on and traffi c data collec on for span-wire equipped intersec ons



S S ®

All the power of Iteris video detection for span-wire applications

B

• Ideal for work zone and temporary intersec on detec on

• Stop-bar detec on

• Advanced detec on

• Traffi c data collec on

• Non-intrusive to reduce installa on and maintenance costs

• Simple and fl exible installa on and set up

• Full mo on color video provides detec on verifi ca on

• Compact, lightweight, and inconspicuous camera design

• For dual or single-tether span wires

SProcessorPower 12 or 24 VDC, 7W maximumVideo Input NTSC, PAL, 75 Ohm 1 VppCommunica ons RS-232 serial port / USBDetector Outputs /Inputs 4 / 4Status Indicators 4 LEDs indicate output detec on stateEnvironmental -35oF to +165oF (-37oC to +74oC)Humidity 0% to 95% non-condensing 0.5G, 3 axes, 5-30Hz vibra on tested 10G in all 3 axes for shock tes ngMechanical 7” L x 4.5” H x 2.31” W / 0.8lbWarranty 3 years limited warrantyRegulatory NEMA TS-2 compliant FCC part 15, Class ACameraImager 768 x 494 eff ec ve pixels 530 TV lines minimum Automa c white balance >50 dB S/N ra o 1.0 to 10,000 luxLens From 4.6° wide to 46.0° wideFocus Auto focusConnec ons Terminal block type connec onMechanical 11” L x 11” D / 6.00 lbsEnvironmental –31° F to +140° F (–35° C to +60° C)Humidity 0% to 100%Vibra on 0.5G, 3 axes, 5-30 HzPower 115VAC (5W typical, 10W max.) 50/60 HzHeater Indium Tin Oxide, propor onal power


NOTICE: Iteris, Inc. reserves the right to change product specifi ca ons without no ce. Informa on furnished is for informa onal purposes only. This informa on may not be complete or the latest revision. For the most up-to-date informa on, please contact Iteris, Inc.ISO 9001:2008

April 2015 Ver 3

www.iteris.com



The proven power of video… and moreVantage Vector® is an all-in-one vehicle detec on sensor with a wide range of capabili es: stop bar detec on, advanced-zone detec on, and sensing that enables advanced safety and adap ve control applica ons.

It includes all the proven benefi ts of Iteris video detec on: high accuracy, high availability, the video image for remote viewing, no trenching or pavement cu ng for installa on, and SmartCycle technology.

Enhanced dilemma-zone precisionVantage Vector off ers high precision for dilemma zone detec on by integra ng the video fi eld-of-view with radar sensing. Enhanced informa on includes the number of vehicles, speed, and distance in user confi gurable zones, that can be used for special applica ons.

V V ®

The power of video and radar sensor fusion

Extended range for higher speed approachesThe extended range of the advanced zone includes enhanced count, speed, and occupancy (CSO) measurements, where data from advanced detec on zones is desired.



www.iteris.com

V V ®

The power of video and radar sensor fusion

March 2015 Ver4

Richer data enabling new applica onsVantage Vector enables an exci ng new range of speed related intersec on safety func ons with the availability of vehicle loca on and speed data.



SVector Sensor Electrical 110/220 VAC, 10W (typical), 20W (peak) Physical Weight – 10lbs (4.55 kg) Size – 14”H x 15”W x 17”D (35.6cm x 38.1 cm x 43.2 cm) EPA – Less than 1.5 sq. . IP67 rated enclosureOpera ng Temp. -35oF to +165oF (-37oC to +74oC)Humidity 0 - 100% RHVibra on 0.5G, 3 axes, 5-30HzShock 10G in all 3 axesRegulatory FCC part 15, Class A NEMA TS-2 compliantRadar Frequency – 24GHz (K-band) Accuracy – Speed 0 to 150 mph ± 1 mph (240 kph ± 1.5 kph) Tracked objects – Up to 20 Detec on – Across 4 lanes of traffi cImage Sensor 1/4” CCD 380,000 eff ec ve pixels 550 Horizontal TV lines > 50 dB S/N ra o 1.0 lux minimum illumina on 2D/3D Noise Reduc on Automa c white balance 1 Vpp (sync nega ve) 12x op cal zoom lens f=3.7 mm (wide) to 44.4 mm (tele)Communica ons Via data embedded on video signalWarranty 3 years limited warranty

Vector Processor Electrical 12 or 24 VDC, 7W maximum 490mA @ 12 VDC 280mA @ 24 VDCPhysical Weight - 0.8lb (.363Kg) Size - 7” L x 4.5” H x 2.31” W (17.78cm x 11.43cm x 5.86cm)Opera ng Temp. -35oF to +165oF (-37oC to +74oC)Humidity 0 - 95% RH non-condensingVibra on 0.5G, 3 axes, 5-30HzShock 10G in all 3 axesRegulatory FCC part 15, Class A NEMA TS-2 compliantDetector I/O Outputs (open collector +24VDC nominal 50mA) 4 outputs on rear edge of module 4 inputs on rear edge of module 24 detec on zones per camera channel 24 total output channels per video input using extension modulesVideo NTSC or PAL, 75 Ohm 1 Vpp 1 input channel – single BNC 2 input channel – dual BNC 1 output channel – single BNCStatus Indicators 4 LEDs indicate output detec on state 4 LEDs indicate video sourceCommunica on EIA-232 serial port USB port for pointer control or fi rmware upgradeWarranty 3 years limited warranty



Versa lity with valueVersiCam™ is an integrated machine vision processor and camera solu on, designed for small or semi-actuated intersec ons. VersiCam off ers the same high performance as our Vantage® video detec on products in a low-cost package.

VersiCam is a versa le, high resolu on video traffi c camera specially op mized for machine vision processor technology. The camera off ers remote zoom and focus func ons to simplify setup and includes a high sensi vity color imager (CCD) to ensure accurate vehicle detec on in all ligh ng condi ons.

The VersiCam solu on includes the Interface Communica on Controller (ICC) that resides in the roadside cabinet. All user interface func ons are performed through the ICC such as virtual zone placement, detector output assignment, and video monitoring.

V C ™

Powerful yet affordable

Aff ordable and accurateVersiCam compliments the exis ng Vantage range of Edge®2 video detec on products by providing entry-level video detec on and output presence detec on at a cost-effi cient price. Your investment is future-proofed by VersiCam’s fl exible design that can support simple fi rmware upgrades.

$



B• Op mized for outdoor traffi c situa ons that aids video detec on

• Integrated moun ng brackets reduce installa on and setup me

• Connectors located on back faceplate simplifi es cable connec on

• Propor onal power-controlled internal heater prevents ice and condensa on resul ng in improved video detec on performance in adverse weather condi ons.

• ICC Card – fi ts in all 170 input fi les, NEMA TS-1 and TS-2 cabinets

• ICC Shelf-mount - available for non-rack applica ons

• Bracket – fl exible and adaptable camera moun ng bracket

• Cabinet set-up using monitor and mouse

S V C ICC-M ICC-S M Features • Color imager • 170 input fi le compa ble • Compact enclosure

• 768 x 494 eff ec ve pixels • TS-1 and TS-2 compa ble

• 530 TV Lines • 2 open collector outputs • 2 open collector outputs

• Automa c white balance • 8 zones • 8 zones

• >50dB S/N ra o

• 1.0 to 10,000 lux

Lens Focal length and focus

adjustable for horizontal

FOV ranging from 4.6o

wide to 46.0o wide

(65o wide for VersiCam Flex)

Connec ons Pluggable terminal–6 way Connector (6-way) for camera & Connector (6-way) for camera &

• 2 x DC Power 3-way for op onal AC power input 3-way for op onal AC power input

• 2 x Diff eren al video BNC video output, NTSC composite BNC video output, NTSC composite

• 2 x Diff eren al control 1V p-p@75 Ohm 1V p-p@75 Ohm

USB mouse port USB mouse port

RS-232 serial port RS-232 serial port

Mechanical

Dimensions 13.5” (L) x 4” (D) 7” (L) x 4.5” (H) x 2.31” (W) 8.3” (L) x 5” (H) x 2.8” (W)

34.3cm x 10.2cm 17.78cm x 11.43cm x 5.85cm 21cm x 12.7cm x 7.2cm

Without bracket

Weight 4.25lb (1.92kg) 1.05lbs /0.48Kgs 2.40lbs /1.09Kg

Environment

Temperature -31oF to +165oF -35oF to +165oF -35oF to +165oF

(-35oC to +74oC) (-37oC to +74oC) (-37oC to +74oC)

Humidity 0 – 100% rela ve 0 – 95% rela ve 0 – 95% rela ve

Vibra on Non-condensing Non-condensing

0.5G, 3 axes, 5-30Hz 0.5G, 3 axes, 5-30Hz 0.5G, 3 axes, 5-30Hz

Shock 10G, all 3 axes 10G, all 3 axes 10G, all 3 axes

Power

Input 24 to 48VDC, 11W typical, 22W max 100-240VAC 50/60Hz 0.7A 100-240VAC 50/60Hz 0.7A

V C ™Powerful yet affordable

ICC Module

The Iteris VersiCam is a complete video vehicle detec on solu on that is a cost eff ec ve replacement to induc ve loops and other sensor technologies for many smaller intersec ons. Other applica ons include advance detec on, highway, ramp metering, and construc on-work zones.



July 2012 Ver1

www.iteris.com

$



State-of-the-art video detec on processorThe Vantage Edge®2 processor is a key component in the family of Vantage® video detec on solu ons. The module combines state-of-the-art technology with sophis cated algorithms to deliver dependable vehicle detec on required for today’s complex transporta on systems. The Edge2 processor features single, dual, or quad video inputs to maximize confi gura on effi ciencies for intersec on control, highway monitoring, and ramp metering fl ow control applica ons.

Maximum fl exibility with op onal modulesThe processor module is complimented by mul ple Input/Output and Extension Modules that provide fl exible and expandable solu ons to meet the needs of larger and more complex intersec on confi gura ons.

V E ®2A machine vision processor that delivers superior performance

The Edge2 processor module and its associated expansion modules fi t into standard detector racks to simplify installa on and setup. All modules are designed as a simple and cost-eff ec ve replacement for the induc ve loop amplifi er module confi gura on.

Bid 09-16 Exhibits B5 - B7


www.iteris.com

V E ®2 A machine vision processor that delivers

superior performance

B• “Plug and play” opera on enables use of exis ng detector rack

• Simple to use interface reduces training me and improves produc vity levels

• Ease of set up and minimal lane closure me reduces manpower cost and keeps traffi c fl owing during equipment installa on

• Expandable and modular system allows for op mal confi gura on that helps to reduce cost while preserving room for incremental growth

SPower 12 or 24 VDC, 7W maximum Consump on • @12VDC - 490mA • @24VDC - 280mAVideo Input type • NTSC, PAL • 75 Ohm 1 Vpp 1 input channel • Single BNC connector 2 input channel • Dual BNC connector 4 input channel • DB15 video input connector (cable supplied) Output – All models • Single BNC connectorCommunica ons RS-232 serial port USB port for pointer controlDetector I/O Outputs (open collector +24VDC nominal 50mA) • 4 on rear edge of module Inputs • 4 on rear edge of module 24 detec on zones per camera channel Status Indicators 4 LEDs indicate output detec on state 4 LEDs indicate video sourceEnvironmental -35oF to +165oF (-37oC to +74oC) 0% to 95% humidity non-condensing 0.5G, 3 axes, 5-30Hz vibra on tested 10G in all 3 axes for shock tes ngMechanical 7” L x 4.5” H x 2.31” W. (17.78cm x 11.43cm x 5.86cm) 0.8lb (.363Kg)Warranty 3 years limited warrantyRegulatory NEMA TS-2 compliant FCC part 15, Class A

ISO 9001:2008


NOTICE: Iteris, Inc. reserves the right to change product specifi cations without notice. Information furnished is for informational purposes only. This information may not be complete or the latest revision. For the most up-to-date information, please contact Iteris, Inc.

Edge2 Dual Edge2 Single

Edge2 Quad

The Edge2 processor and all of its associated modules can be completely confi gured by using a mouse and video monitor only, elimina ng the need for expensive laptops or PDA devices.

July 2012 Ver1



Iteris’ VantageView™ advanced video detec on management so ware, u lizing our EdgeConnect™ quadview communica ons module, provides the ability to collect and report data in addi on to this, its integrated so ware pla orm enables users to manage and see video feeds from Iteris’ Vantage® video detec on assets remotely over a network connec on. With VantageView’s intui ve graphical interface, users can archive video and intersec on confi gura on informa on, modify local video detec on se ngs from one central loca on, collect data, and see as many as 36 approaches at a me.

Using a web-based and map-centric approach, VantageView allows the user to see a street map display or “bird’s eye view” of the road network with all devices. Working with EdgeConnect, and select 3rd party

V V ™

Central software for video detection management, data collection, and intersection surveillance

communica on devices, VantageView allows the user to view streaming video of each connected Iteris camera ― one mouse click provides real- me access to live video to see what is happening.



www.iteris.com

V V ™

Central software for video detection management, data collection, and intersection surveillance

B

• Facilitates centralized video detec on infrastructure management by providing both sta c and dynamic informa on; opera onal status; and remote confi gura on of video detec on devices in the fi eld

• Provides centralized maintenance and inventory management capabili es

• Enables real me visual monitoring of the road network by providing a centralized means to remotely access real me video feeds from the video detec on cameras

• Cuts the expense and risk of obtaining turning movement counts data with staff or contractors

• Char ng and graphing shows volume, speed, occupancy, and vehicle size classifi ca on data

• Helps collect data for average annual daily traffi c counts

• Provides turning movement counts, data char ng, and expor ng to a variety of formats

VantageView’s device management capabili es can eliminate the need for fi eld visits to reconfi gure intersec ons. The system provides for easy, centralized confi gura on of zones and camera setup func ons to op mize performance straight from the desktop in the traffi c center or any other loca on with web and network access.

Mul ple users can access VantageView over a standard web browser from any loca on with Internet and network access.

SSystem: Mul -user, web basedSupported browsers: Internet Explorer version 8.xBrowser: Internet Explorer 8Server Processor: Intel Xeon® X3430, 2.4 GHzServer RAM: 4 GB, 1333 MHzServer Hard Drive: 250 GBServer Moun ng: Standard rack mountServer Network Adapter: On-board dual gigabitServer Database: Microso ® SQL Server™ 2008 ExpressServer Opera ng System: Win 7 Professional, 32 Bit

36See as many as

approaches at one me.



August 2012 Ver1



Ethernet connec vity with streaming videoVantage EdgeConnectTM is a unique “technology fi rst” product that enhances connec vity between systems in the fi eld and a remote management system. Iteris’ EdgeConnect quad-view remote communica ons module provides both local and remote management of data and video over Ethernet — enabling system operators to manage their Vantage® video detec on systems more effi ciently and eff ec vely by allowing the user to view real- me video and move data from the fi eld to a central loca on.

Highly fl exible for unique user experienceVantage EdgeConnect’s advanced MPEG4/H.264 video compression ability minimizes bandwidth usage, and is scalable to fi t the bandwidth available.

V E C ™

Quad-view remote communications module

Data rates can be set as low as 32 kbps or as high as 7 Mbps. Variable video frame rates between 5 and 30 frames per second also allow the user to op mize the streaming video to fi t their specifi c applica on.



V E C ™

Quad-view remote communications module

B

• Quickly review the opera on of an en re intersec on on one screen

• MPEG4/H.264 video compression ability is scalable to fi t the bandwidth available

• “Plug and play” opera on enables use of exis ng detector rack, minimizing the need for reconfi guring the controller cabinet

• Simple-to-use interface reduces training me and improves produc vity levels

• Ease of setup and remote access reduces me and cost of installa on and maintenance of equipment

• Single quad view video stream or four independent single streams

4Accommodates up to

video sourceinputs

S Connec ons 4 BNC connectors for video input (via DB15 spider cable) 4 RJ45 Edge2 Extension Module interface 1 RJ45 Ethernet connector 1 EIA-232 local access port USB mouse port 1 BNC composite video out connector Mechanical Size 7.0” long, 4.5” high, 2.3” wide (17.8 cm long, 11.4 cm high, 5.8 cm wide) Weight 0.64 lbs. (0.29 kg) Environment Temperature -35° F to +165° F (-37° C to +74° C) Humidity 0% to 95% non-condensing Vibra on 0.5G, 3 axes, 5-30 Hz Shock 10G in all 3 axes Electrical 12/24 VDC (500/260 mA) - 6.25 W max



July 2012 Ver1

www.iteris.com

The EdgeConnect module provides the ability to view up to four camera feeds through a single IP connec on, enabling the user to quickly review the opera on of an en re intersec on on one screen. The easy-to-use, browser-based user interface simplifi es the management of video streams.



Simplicity at its best - Integrated Iteris video detec onThe IDM-M50 combines the power of Iteris Edge®2 video detec on processor and EdgeConnect™ communica ons module with the Siemens M50® NEMA Controller. This advanced module easily provides 64 channels of detec on, elimina ng the need for mul ple Input/Output and Extension Modules, saving you money.

The new Iteris IDM-M50 reduces or eliminates the need for a detector rack and addi onal hardware in the tra c cabinet, allowing for smaller more compact cabinets that can be pole mounted. Cabinets housing loops or other detec on technology bene t with addi onal detec on capabili es from the IDM-M50 con gura on without adding more detector racks or the wiring that is required for installa on.

IDM-M50Integrated Detection Module (IDM) for the Siemens® M50 NEMA controller

Programming and mapping the detec on to the correct phase in the controller is simple using Iteris Vantage® so ware.



F• Integrated Iteris Vantage video detec on system for Siemens M50 Series controllers

• Supports a variety of cabinet styles including the NEMA TS-1, TS-2 Type 1, and TS-2 Type 2

• Built-in 10/100 Base-T Ethernet port

• MPEG4/H.264 video compression is scalable to t the available bandwidth

B• Quickly review the opera on of an en re intersec on on one screen

• Easy setup and remote access reduces me and cost of installa on and maintenance of equipment

• Plug and play opera on enables use of exis ng 3U expansion slots in the M50 Series controller

IDM-M50Integrated Detection Module (IDM) for the

Siemens M50 NEMA controller


NOTICE: Iteris, Inc. reserves the right to change product speci ca ons without no ce. Informa on furnished is for informa onal purposes only. This informa on may not be complete or the latest revision. For the most up-to-date informa on, please contact Iteris, Inc.ISO 9001:2008

July 2014 Ver5

www.iteris.com

SPower 12 or 24VDC 13.25 W maximumVideo NTSC, 75 Ohm 1Vpp Maximum 4 cameras 24 Detec on Zones per cameraCommunica ons One RS-232 serial port USB port for pointer control Ethernet for data transfer and setupConnec ons One 2 terminal, pluggable connector for power input Four BNC connectors for video input (via DB15 spider cable) Two RJ45 Edge2 Extension Module Bus interface One BNC composite video out connector One #10 Terminal for Chassis GroundDetector I/O Via Ethernet PortStatus Indicators Four LEDs indicate output detec on state One Online LED One Video Lock LEDEnvironmental Temperature -35° F to +165° F (-37° C to +74° C)Humidity 0% to 95% non-condensingVibra on 0.5G, 3 axes, 5-30 HzShock 10G in all 3 axesMechanical Size Size 7.9” long, 7.0” high, 3.25” wide (20.1cm long, 17.8cm high, 8.3cm wide)Weight 1.65lbs (.75kg)Warranty 3 years limited warrantyRegulatory NEMA TS-2 compliant FCC part 15, Class AController Requirements Siemens M50 series with rmware Ver 3.34g or higher

Iteris, Edge, and EdgeConnect are registered trademarks of Iteris.Siemens and M50 are registered trademarks of Siemens.



State-of-the-art video detec on systemVantageNext® is Iteris’ next genera on video detec on system that capitalizes on the latest technology. VantageNext uses a powerful processor that enables future func onal growth while maintaining proven Iteris video detec on performance and reliability. The architecture supports expanding ITS applica ons and easily integrates with exis ng and future technologies.

Today’s traffic engineers and planners need real-time data to ensure maximum efficiency and effectiveness of traffic management solutions. VantageNext captures all the data necessary to allow the local traffic controller to manage the intersection remotely while delivering network-wide data back to the traffic management center.

V N ®

State-of-the-art video detection that deliverssuperior performance on a scalable platform

Simple to install and set upVantageNext improves the lifecycle cost by simplifyingthe cabling between the camera and the tra c cabinet and within the cabinet itself. No special tools are required for installa on. Excep onal vehicle detec onthrough advanced algorithm design.



www.iteris.com

V N ®

State-of-the-art video detection system that deliverssuperior performance on a scalable platform

B• Low lifecycle cost• Easy to install, con gure, and maintain• CAT5 cable connec ons• Simple and convenient access• Flexible and scalable• Automa c tra c coun ng• FOV set up from the ground

F• New and enhanced graphical user interface for operator ease-of-use• Integrated streaming video• Advanced video detec on performance• VantageNext video viewer - Windows® and iOS®• Shareable inputs and outputs• Integrated surge protec on• Remote rmware upgrade• Integrated SLDC• 32 zones per camera

ISO 9001:2008


NOTICE: Iteris, Inc. reserves the right to change product speci cations without notice. Information furnished is for informational purposes only. This information may not be complete or the latest revision. For the most up-to-date information, please contact Iteris, Inc.

July 2014 Ver5

SVideo ProcessorPower 12 or 24 VDC, 5W typical Video Output Compressed Digital StreamDetector I/O 4 open-collector outputs and 4 inputs per processor card 128 total outputs /64 total inputs using extension modulesStatus Indicators Primary power Video input status Detec on outputsCommunica ons Ethernet, DCAM I/FCCUPower 110/220 50/60Hz 20W max.Communica ons Ethernet USB Type A (x2) Wi-Fi SDLC communica onsVideo Output MPEG-4 and H.264 Resolu on D1/VGA/CIF Frame rate 30fpsCameraPower 48VDC, 5W Connec ons Terminal BlockCommunica ons DCAM I/FEnvironmental IP-67GeneralEnvironmental -35oF to +165oF (-34oC to +74oC) 0% to 95% humidity non-condensing 0.5G, 3 axes, 5-30Hz vibra on 10G in all 3 axes for shockWarranty 3 years limited warrantyRegulatory NEMA TS-2 compliant FCC part 15, Class A

Windows is a registered trademark of Microso .iOS is a registered trademark of Apple.



Rack confi gura ons available for any needVantage Edge®2 video detec on products are designed to fi t easily and seamlessly into standard detector racks, such as NEMA TS-1, NEMA TS-2 Type1 and 2, and Caltrans 170/2070 input fi les. For video detec on applica ons that require a separate detector rack system, Iteris off ers the VRack system as a fl exible and expandable shelf-mounted detector rack solu on.

The VRack system can be tailored to meet a variety of applica on confi gura ons. Whether you need a system for a single camera or for mul ple camera confi gura ons, the VRack system can be integrated easily into your exis ng traffi c signal controller cabinet confi gura on. VRack provides an elegant and cost-eff ec ve video detec on solu on for intersec on control, ramp metering, or highway monitoring applica ons.

V ® VRA fl exible and expandable rack system

VRack is off ered in various confi gura ons to accomodate any applica on including a single slot rack to versions that support TS-1 and TS-2 applica ons.

The VRack system can also be confi gured to include addi onal input and output modules or the Vantage EdgeConnect communica on module. Whatever your video detec on requirements, VRack can be op mized and tailored to suit your specifi c applica on needs. Just tell us what you need!



V ® VRA fl exible and expandable rack system

B

• Flexible and expandable system allows for op mal confi gura on that helps to reduce cost while preserving room for incremental growth

• Separate module and power supply racks enable maximum use of available space in crowded or ght cabinet enclosures

• Easy set up and confi gura on minimizes installa on me and cost

• Field-proven reliability and durability reduces maintenance and service overhead

SPower PS2420 power supply module 110-240VAC auto sensing (81.7W@ 0.71A, 115VAC) +24VDC output @1.6Amps with DC hold @50ms (38.4W) DC Input for VRack One, TS1 and TS2 3-pin input block connector on rear DC Output for VRack 1 and PS 3-pin output block connector on rear AC Output for VRack TS1 and TS2 3-pin output block to support daisy-chaining of VRack systemDetector Channel Output (Excludes VRack PS) Mul ple DB9 connector for contact closure output channelsDetector Channel Input Mul ple inputs available on rear with logic groundVRack Communica on (Excludes VRack PS) RJ45 receptacle to support communica on between VRack systemsEnvironmental -35oF to +165oF (-37oC to +74oC) 0% to 95% humidity non-condensing 0.5G, 3 axes, 5-30Hz vibra on tested 10G in all 3 axes for shock tes ngMechanical NOTE: Foot brackets, if fi ed, increase height of detector rack by 0.6” (1.6cm) VRack1 5”High x 2.8”Wide x 8.27”Deep (12.7cm x 7.2cm x 21cm) 1.34lbs (0.61Kg) Vantage PS 5”High x 2.8”Wide x 8.27”Deep (12.7cm x 7.2cm x 21cm) 2.20lbs (0.99Kg) – with power supply module 1.34lbs (0.61Kg) – without power supply module VRackTS1 5”High x 12.87”Wide x 8.27”Deep (12.7cm x 32.7cm x 21cm) 3.97lbs (1.80Kg) – with power supply module 3.13lbs (1.42Kg) – without power supply module VRackTS2 5”High x 12.87”Wide x 8.27”Deep (12.7cm x 32.7cm x 21cm) 3.97lbs (1.80Kg) – with power supply module 3.13lbs (1.42Kg) – without power supply moduleWarranty 3 years limited warranty


NOTICE: Iteris, Inc. reserves the right to change product specifi ca ons without no ce. Informa on furnished is for informa onal purposes only. This informa on may not be complete or the latest revision. For the most up-to-date informa on, please contact Iteris, Inc.

ISO 9001:2008

July 2012 Ver1

www.iteris.com


RZ-4 Advanced

Documents

Transcript of RZ-4 Advanced