Ryan P. Quilala CV
-
Upload
ryan-quilala -
Category
Documents
-
view
295 -
download
2
Transcript of Ryan P. Quilala CV
QUILALA, RYAN PINEDA
Nationality : Filipino
Date of Birth : September 26, 1984
Address : Apt/Blk 43 Holland Drive. #03-51,
Singapore 270043
Email address : [email protected]
Contact Nos. : (+65)85104187
NRIC/FIN No.: G5155131T
PROFILE:
With enriched experience and knowledge in the field for Mechanical, Piping,
Instrumentation and Electrical work. Have been involved with various QA/QC and
Technical Inspection and Testing of plant construction equipments and materials with
accordance to the project standards and specifications.
JOB EXPERIENCE:
MUN SIONG ENGINEERING LIMITED
Mun Siong Engineering Limited
35 Tuas Road, Singapore 638496
July 16, 2012 – Present
ACTIVITIES:
• Senior QA/QC Supervisor/Lead
• Preparations of documents and presentation for Project Pre-Inspection
Meeting.
• Coordinate and attend weekly meeting with Client’s Project Managers,
Project Engineers and Project Supervisors for progress status of updates.
• Conduct meeting and briefing for the Project requirements and standard
procedure.
• Allocate workloads and schedules to corresponding Project QC Inspectors.
• Review and check construction documents being used at site such as:
Method of Statement, ITP, Work Procedure, etc.
• Coordinate with the Material Engineer all relevant material deliveries such
as acceptance and/or rejections.
• Coordinate with engineering and field operation group for the study of
installation works considering technical aspect and work execution.
• Review, check and verify that works are carried according to the required
quality standard and specifications.
• To undertake QC functions in the workplace for daily QC activities.
• Maintenance QA/QC SUPERVISOR (Piping and Mechanical)
• Ensure that safety practices were followed prior to commencement of
work.
• Review and check construction documents being used at site such as:
Method of Statement, ITP, Work Procedure, etc.
• Coordinate with the Material Engineer all relevant material deliveries such
as acceptance and/or rejections.
• Coordinate with engineering and field operation group for the study of
installation works considering technical aspect and work execution.
• Review, check and verify that works are carried according to the required
quality standard and specifications.
• To undertake QC functions in the workplace for daily QC activities.
• To interface and coordinate with clients QC matters with for all related
inspection activities.
• Prepare and submit relevant report such as but not limited to weekly or
monthly and other report as may be requested by the Project QC Manager.
• Performing and carrying out all standard NDT and Testing requirements.
• Visual inspection and dimensional of completed weld against the
specifications requirements and drawing. Reviewing of hydro test package
and conduct line checking/ punch listing (to ensure that all welds on lines
are completed) prior for hydro testing.
• QCT Engineer for TFA ( TOTAL FLANGE ASSURANCE )
• Ensure proper coordination with the main contractor (SEPL).
� Develop QC measurements model at Bolt-UTG as per given TFA
specification for bolted joints for zone 2-4.
� Support activities of Authorize Foreman and deliver full range of QC
duties at flanges assigned for Bolt-UT measurements by TFA
specification.
� Witness and inspect hydrostatic testing for Vessels, Columns and
Exchangers.
� Take Reference and Final Bolt-UT readings for bolted joints at zone 2-4.
� Accept or Reject joint tightness based on Bolt-UT measurements and
result of visual inspection
� Put a seal on accepted flanges
� Advise Authorize Foreman on failure mitigation actions in case of flange
rejection.
� Report to SEPL Executing Engineer QC progress and all cases of TFA
non-compliance.
� Manage data files and prevent data corruption or losses.
� Cooperate with Tensioning / Hydraulic torquing supervisor (supplied by
TET Alliance) to acquire Reference and Final measurements of stud bolt
loading for all tensioning / Hydraulic torquing job
CWT ENGINEERING PTE. LTD.
47 Jalan Buroh, Singapore 619491
June 10, 2011 – July 14, 2012
ACTIVITIES:
• SUPERVISOR
• Ensure that safety practices were followed prior to commencement of work.
• Supervision in allocation of manpower to ensure the quality of production
for mechanical materials with accordance to the clients standards.
• Material Receiving, Inspections and Measurement of Fabricated Materials.
Pipes, Steel Plates, Beams and Metal profiles prior to Blasting and
Painting.
• Coordination with client QC for the required paint and specification.
• Implementation of inspection standards for Blasting and Painting of Pipes
and Steel Plates.
• Testing of WFT and DFT of painted materials with accordance with the
client standards and specifications.
• MAINTENANCE ENGINEER
• Maintaining the condition of all blasting and painting machine.
• Ensure quick solution and fixed up upon machine breakdown for
continuous production.
QATAR SHELL PEARL - GTL PROJECT
S.E.C / CHIYODA HYUNDAI HEAVY INDUSTRIES
RAS LAFFAN Industrial City, Qatar
December 01, 2009 – December 01,2010 (End of Contract)
ACTIVITIES:
• INSTRUMENT and ELECTRICAL QA/QC INSPECTOR
• Implementation of final installation standards and inspection for Field
Instruments, Stanchions and Cable Trays.
• Installation and Leak Testing of Air / Impulse tubing for various
instruments.
• Insulation resistance and Continuity testing of Control Cables, Power
Cables and Instrument Cables.
• Cable Installation, including Tray, Earthing and Bonding jumper
installation inspection.
• Lighting, Switch, Receptacle, Junction Box cable testing and installation
inspection,
SHARQ 3RD
EXPANSION, ETHYLENE PLANT
AL – RUSHAID CONSTRUCTION Co. Ltd / EEI CORPORATION .ph
Industrial City, Al – Jubail, Kingdom of Saudi Arabia
February 27, 2008 – October 16, 2009 (End of Contract)
ACTIVITIES:
• INSTRUMENT QA/QC INSPECTOR
• Material Receiving / Inspection of Construction, Electrical and Instrument
equipments.
• Calibration of Field Instruments.
• Implementation of the installation standards for Field Instruments,
Instrument Panels, Stanchions, Racks and Cable Trays.
• Installation and Leak Testing of Air / Impulse tubing for various
instruments.
• Insulation resistance and Continuity testing of Control Cables, Power
Cables and Instrument Cables.
• PUNCHLIST LEAD QC / COORDINATOR
• Coordinate the inspections of instruments within a given System /
Subsystem with the client (SHARQ PMT) and main contractor ( Shaw
Stone and Webster PMT ).
• Assisting in the supervision of the Field Operation Group (FOG) to ensure
the rectification and closing of punch lists for the compliance with the
project standards and specifications.
• PIPING QA/QC INSPECTOR
• Ensure that safety practices were followed prior to commencement of
work.
• Review and check construction documents being used at site such as:
Method of Statement, ITP, Work Procedure, etc.
• Coordinate with the Material Engineer all relevant material deliveries such
as acceptance and/or rejections.
• Coordinate with engineering and field operation group for the study of
installation works considering technical aspect and work execution.
• Review, check and verify that works are carried according to the required
quality standard and specifications.
• To undertake QC functions in the workplace for daily QC activities.
• To interface and coordinate with clients QC matters with for all related
inspection activities.
• Prepare and submit relevant report such as but not limited to weekly or
monthly and other report as may be requested by the Project QC Manager.
• Visual inspection and dimensional of completed weld against the
specifications requirements and drawing.
• Reviewing of hydro test package and conduct line checking/ punch listing
(to ensure that all welds on lines are completed) prior for hydro testing.
• INSTRUMENT AND PIPING TURN OVER REVIEWER
• Ensures that all documents and drawings required per loop are attached
and presented.
• Interpretations of Piping and Instrument Drawing ( P&ID ), Instrument
Loop Diagram ( ILD and other relevant drawings to ensure the testing or
inspection required for the instruments per loops to be accomplished and
properly documented.
• Review of Isometric Drawing and other relevant documents to ensure the
testing or inspection required per packages to be accomplished and
properly documented.
JUAYMAH CAMP RESIDENTIAL EXPANSION
AL – RUSHAID CONSTRUCTION Co. Ltd / EEI CORPORATION .ph
Industrial City, Al – Jubail, Kingdom of Saudi Arabia
February 18, 2008 – February 27, 2008
ACTIVITIES:
• ELECTRICAL QA/QC INSPECTOR
• Material Receiving and Inspections of residential cabins, power cables and
equipments.
• Insulation resistance and Continuity testing of electrical cables.
• Installation of electrical panel.
• Cable Installation, including Tray, Earthing and Bonding jumper
installation inspection.
GV – RADIO BROADCASTING NETWORK
Angeles City, Pampanga, Philippines
August – October 2007
ACTIVITIES:
• STATION TECHNICIAN
• Monitor and Ensures the smooth broadcasting of the station’s programs.
• Maintenance of the subscribe radio frequency output and other
communication equipments.
EDUCATIONAL ATTAINMENT:
B.S in Electronics and Communication Engineering - Holy Angel University
Angles City, Pampanga, Phil.
AWARDS / CITATIONS:
Top Performer (Best QC for 2014) - AWARDEE
Mun Siong Engineering Ltd.
Shell Bukom
Top Performer (Best QC for 2013) - AWARDEE
Mun Siong Engineering Ltd.
Shell Bukom
CERTIFICATE for EXCELLENCES - AWARDEE
SHARQ 3RD
EXPANSION PROJECT
Al-Jubail, Kingdom of Saudi Arabia
Institute of Electronics and Communication Engineers - MEMBER
National Chapter, Philippines
Holy Angel University - PESO SCHOLAR
Angeles City, Philippines
Republic Central Colleges - MODEL STUDENT
Angeles City, Philippines
Special Science High School - SCHOLAR
Angeles City, Philippines
SEMINARS / SPECIAL COURSES:
� PT Level II (CUTECH Quality Solutions PTE. LTD.)
� WORKING AT HEIGHT COURSE FOR SUPERVISORS (K2S Safety
Consultancy PTE LTD)
� ASME SEC VII DIV 1 (ABS Consulting)
� RI Level II (CUTECH Quality Solutions PTE. LTD.)
� Pre-commissioning induction (PEARL – GTL Project)
� Total Quality Management ( ISO 9001 AWARNESS )
� Pre-Commissioning Training and Seminar (SHARQ 3rd
EXPANSION)
� H2S Safety Evacuation Seminar (SHARQ 3rd
EXPANSION)
� Power Cables (PHELPS DODGE Phils. ENERGY PRODUCTS) SYSTEM SOFTWARES, CODES and STANDARDS:
� ASME Standards
� SABIC Standards
� ARAMCO Standards
� Microsoft Windows Office
� Cisco Networking
� Autocad