RX-3
-
Upload
alfredo-mena -
Category
Documents
-
view
229 -
download
0
Transcript of RX-3
-
7/28/2019 RX-3
1/6
RX-3
HANGZHOU SILAN MICROELECTRONICS CO.,LTD REV:1.1 2005.12.29
Http: www.silan.com.cn Page 1 of 6
TOY CAR REMOTE CONTROL RECEIVER
DIP-16-300-2.54
SOP-16-225-1.27
DESCRIPTION
The RX-3 is a CMOS LSIs designed for remote controlled car
applications. The RX-3 has only 2 keys with 3 states, i.e. forward key
for forward function, backward key for backward function, and stop
function if there is no signal.
FEATURES
* Wide operating voltage range (VCC=2.2 ~ 12V)
* Few external components are needed
* Typical oscillator frequency 76KHz
* RX-3 built-in Zener 3V
* 2 functions remote controller including forward/backward
ORDERING INFORMATION
Part No. Package
RX-3 DIP-16-300-2.54
RX-3S SOP-16-225-1.27
BLOCK DIAGRAM
ABSOLUTE MAXIMUM RATINGS
Characteristics Symbol Value Unit
Supply Voltage VDC 0.3~15 V
Input / Output Voltage VI/O GND-0.3~VDD+0.3 V
Operating Temperature TOPR -10~60 C
Storage Temperature Tstg -25~125 C
http://www.silan.com.cn/http://www.silan.com.cn/ -
7/28/2019 RX-3
2/6
RX-3
HANGZHOU SILAN MICROELECTRONICS CO.,LTD REV:1.1 2005.12.29
Http: www.silan.com.cn Page 2 of 6
ELECTRICAL CHARACTERISTICS (VDD=6.0V,Fosc=76KHz, Tamb=25C, unless otherwise specified.)
Parameter Symbol Min Typ Max Unit
Operating Voltage VDD 2.2 6 12 V
Operating Current IDD -- 9 -- mA
O/P Driving Current Idrive -- 5 -- mA
Effect Decoding Frequency Variation Ftolerance -20% -- 20% --
PIN CONFIGURATION
PIN DESCRIPTION
Pin No. Symbol Description1 VO2 Inverter 2 output pin for signal amplify
2 NC No connection
3 GND Negative power supply
4 SI Input pin of the encoding signal
5 OSCI Oscillator input pin
6 NC No connection
7 OSCO Oscillator output pin
8 BACKWARD Backward output pin
9 NC No connection
10 NC No connection
11 FORWARD Forward output pin
12 VDD Positive power supply
13 NC No connection
14 VI1 Inverter 1 input pin for signal amplify
15 VO1 Inverter 1 output pin for signal amplify
16 VI2 Inverter 2 input pin for signal amplify
http://www.silan.com.cn/http://www.silan.com.cn/ -
7/28/2019 RX-3
3/6
RX-3
HANGZHOU SILAN MICROELECTRONICS CO.,LTD REV:1.1 2005.12.29
Http: www.silan.com.cn Page 3 of 6
TESTING CIRCUIT (Fosc=76 kHz)
Data Format
Forward Signal: F1=1 kHz
Backward Signal: F2=250Hz
F1=4F2 or F1=2F2 (Mask option)
TYPICAL APPLICATION CIRCUIT
M
12V
0V
SW
100F220F47F
47F
D1 IN41483303.3K 100
10PF
47PF
15PF
3.3F1.2K
5.6K
0.1F
0.002F
Q1
L1
0.01F3.3
K
330
3.9M
500P
F
3.3K
0.002F
91K
VR1
500K
1K
1K
100
Q9
Q11
Q12 Q13
Q10
Q8
0.02F100
330
3.9K
0.01F3.3K
9V
RX-3
82 3 4 5 6 71
14 13 12 11 10 916 15
VO2 NC GND SI OSCI NC OSCO
BACK
WARD
VI1VO1VI2 NC VDD FOR
WARD
NC NC
http://www.silan.com.cn/http://www.silan.com.cn/ -
7/28/2019 RX-3
4/6
RX-3
HANGZHOU SILAN MICROELECTRONICS CO.,LTD REV:1.1 2005.12.29
Http: www.silan.com.cn Page 4 of 6
PACKAGE OUTLINE
DIP-16-300-2.54 UNIT: mm
SOP-16-225-1.27 UNIT: mm
http://www.silan.com.cn/http://www.silan.com.cn/ -
7/28/2019 RX-3
5/6
RX-3
HANGZHOU SILAN MICROELECTRONICS CO.,LTD REV:1.1 2005.12.29
Http: www.silan.com.cn Page 5 of 6
Handling MOS devices:Electrostatic charges can exist in many things. All of our MOS devices are internally protected against
electrostatic discharge but they can be damaged if the following precautions are not taken:
Persons at a work bench should be earthed via a wrist strap.
Equipment cases should be earthed.
All tools used during assembly, including soldering tools and solder baths, must be earthed.
MOS devices should be packed for dispatch in antistatic/conductive containers.
Note: IC oscillator input mustn't be on the outside layer, thus to avoid the abnormal working when human body
touches the remote controller without crust in testing.
http://www.silan.com.cn/http://www.silan.com.cn/ -
7/28/2019 RX-3
6/6
RX-3
HANGZHOU SILAN MICROELECTRONICS CO.,LTD REV:1.1 2005.12.29
Http: www.silan.com.cn Page 6 of 6
ATTACHMENT
Revision History
Data REV Description Page
2004.08.03 1.0 Original
2005.12.29 1.1 Add the package of SOP-16-225-1.27
http://www.silan.com.cn/http://www.silan.com.cn/