Ruwac USA Industrial Vacuums WSP 2000 & 4000 (Wet Vac) … MANUALS/WSP 2000 an… · 9 27014 Motor...

Ruwac® USA Industrial Vacuums WSP 2000 & 4000 (Wet Vac) Series

Parts Manual Model No. Serial No. Start-Up Date

Contents__ Warranty Safety Parts

Ruwac USA - 54 Winter St. - Holyoke, Ma. 01041 - Tel# 413-532-4030 - Fax# 413-532-4039 REVISION - B 4/29/10

Warranty

RUWAC warrants that new equipment which are complete units and are sold and/or manufactured by RUWAC, Inc. will be free from defects in material and workmanship for a period of 18 months from date of shipment or 12 months from date of start-up, whichever come first. RUWAC warrants that replacement parts sold hereunder will be free from defects in material or workmanship for a period of 120-days after the date of shipment. RUWAC machines that have been completely re-built at the factory will carry a 180-day warranty from date of shipment. All field repairs preformed by authorized RUWAC service personnel are covered by a 120-day parts only warranty.

RUWAC, Inc. will not assume any responsibility under the terms of this limited warranty on

equipment, which has not been paid in full. This warranty does not apply to any equipment that has been disassembled, repaired, or otherwise altered by any person without the written authorization of RUWAC’S service department, nor does it apply to any product that has been subjected to failure sure to corrosive or abrasive attack, misused, damaged, or improperly installed, nor does it apply to motors, controls, and components not manufactured by RUWAC, Inc. Motors, controls, and other Sub vendor’s components therefor are warranted only to the extent of the manufacture’s warranty. All warranty work on such products must be authorized by RUWAC, Inc. and must be performed in an authorized shop as designated by the manufacturer. RUWAC sole liability and buyer’s sole and exclusive remedy hereunder is the replacement or repair at RUWAC’S option of products not complying with this warranty. Such repair or replacement shall be F.O.B. RUWAC’S factory, and RUWAC reserves the right to invoice all expenses incurred when repairs are made in the field at the request of the customer, except as specifically set forth herein, RUWAC makes no warranty express or implied, with respect to the products and/or service supplied hereunder, this warranty is in lieu of and excludes all other warranties, including without limitation, any warranty of merchantability, fitness for a particular purpose, or conformance to purchaser’s specifications.

Safety CAUTION: Standard Ruwac WSP machines are designed for intermittent use, i.e. not more then 2 hours continuously. If you are unsure about your application requirements consult your Ruwac representative. CAUTION: Disconnect the machine from the power source before and during inspection and/or maintenance.

A 9

8

11

10

12

24

3

1

6

7

5

13

14

15

26

DETAIL A SCALE 2 : 5

2120

19

22

25 23

17

16

24

WSP MOTOR DECK ASM

000 E 0144 US A

4/19/07 D.J.S.

A E.C.O. # 667 5/13/09 D.J.S.

ITEM NO. PART # DESCRIPTION QTY.1 90223WSP Motor Deck, Red, WSP 12 34817A M6 Blind Pem 23 26603 M6 Motor Hold Down Knob 24 20020 Hold Down Bracket, WNS Notor 25 PH92800B Motor Head Assembly, 120V, 1200 Watt, WSP 1

6 34870 Inlet Gasket, 50mm 17 31963 Inlet, 50mm, GFK Black Plastic 18 32988 #8-1 Phillips Truss Head, Zinc 4

9 21679 Inlet Deflector, 50mm, Wet Vac 110 31407 Small Clamp Hook 2

11 25049 #8-32 hEX Nut 412 25048 #8-32x3/4 Phillips Flat Head Screw 4

13 21630 WSP Junction Box Bracket 114 3481701 M6x25 Allen Head Screw 215 32904 M6x16 Allen Head Screw 216 25067 M6 Flat Washer 417 34876 M6 Lock Nut, Zinc 418 32867 M5 Ext Tooth Lock Washer, Zinc 419 E989NNJ ENCLOSURE,PVC,4X4X2.5" 120 34862 PG-11 Cable Protector 221 27017l Switch,Rocker,1000/1200,Illuminated 122 34955 PG-16 Cable Protector 123 34955-1 PG-16 Nut 124 34862-1 PG-11 Nut with Flange 225 21095 Wire Nut, Twisting, Beige 3

26 2005531 Power Cord, 12/3 SJO, Molded Plug (Removed for 220v) 1

D

C

B

AA

B

C

D

12345678

8 7 6 5 4 3 2 1

THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFRUWAC. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF RUWAC IS PROHIBITED.

PROPRIETARY AND CONFIDENTIAL

NEXT ASSY USED ON

APPLICATION

DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/16"ANGULAR: MACH 30' BEND 30'TWO PLACE DECIMAL .05THREE PLACE DECIMAL .030

BREAK SHARP EDGESMATERIAL

FINISH --

DRAWN

CHECKED

ENG APPR.

MFG APPR.

Q.A.

COMMENTS:

DATE NAME 54 Winter St.Holyoke, Ma. 01040

TITLE:

SIZE

BDWG. NO. REV

SHEET 1 OF 1WEIGHT:SCALE: 1:4

REVISIONS

REV. DESCRIPTION DATE NAME

UNLESS OTHERWISE SPECIFIED:

--

10

9

11

15

8

6

7

1

20

16

22

21

3

19

2

4

5

18

23

14

17

13

12

24

MOTOR HEAD120V, 1200W

WET VAC

000 E 0225 US

4/7/09 D.J.S.

PH92800B

ITEM NO. PART NUMBER DESCRIPTION QTY.1 27001 Motor Head, Aluminum 12 8021 Protection Screen, Motor Head 13 27004 Motor Head Gasket, WNS 14 2509811 Neoprene Sponge Gasket, .375 Thick, 5in ODx 2.25in ID 1

5 27000 Motor, 2 Stage, Bi-Pass, 1200W, 120V 16 31715 Terminal, 90deg, 16-14 Gauge, Blue 27 27007 Separator Plate, WNS Motor Head 1

8 25064 #8x 5/8 Pan Head Screw 29 27014 Motor Housing, Single Motor 110 27015 Housing Cover, Single Motor 111 8004 Support Ring for Single Motor 112 25211 Male IEC Plug 1

13 27017 Rocker Switch, 1000/1200watt 114 27011 #6x 1/2 Sharp Point Screw 2

15 27012 #8x 1/2 Pan Head Screw 316 27003 #8-2 Phillips Pan Head, Zinc 617 34905A Wire Assembly, Plug to Switch, WNS 2

18 32989 #10-16 x 5/8 Hex Washer Tek Screw 119 34817 M6x20 Allen Head Screw 420 372900 Float,Plastic Float w/ Steel Cage 1

21 25067 M6 Flat Washer 422 34876 M6 Lock Nut, Zinc 423 25209 Female IEC Plug 1

24 372901 Pre-Clean Filter, Green, Wet Vac Float 1

D

C

B

AA

B

C

D

12345678

8 7 6 5 4 3 2 1



NEXT ASSY USED ON

APPLICATION



FINISH --

DRAWN

CHECKED

ENG APPR.

MFG APPR.

Q.A.

COMMENTS:

DATE NAME 54 Winter St.Holyoke, Ma. 01040

TITLE:

SIZE

BDWG. NO. REV


REVISIONS



--

WSP2000 PUMP ASSEMBLY

PART NUMBER DESCRIPTION QTY27910 DUSTCAP,1.5",POLYPRO 127906 CAMLOCK,1.5"MALE CAM X MNPT,POLYPRO 127914 BULKHEAD,1.5",TXT,POLYPRO 127919 NIPPLE,1-1/2" X CLOSE,PVC 127902 UNION,1.5 (F)T-T,PVC 127901 NIPPLE,1.5 X 3,80 THREAD,PVC 1279041 ELBOW,90,1.5",SLIP X SLIP,PVC SCHEDULE 80 131672 REDUCING BUSHING,1-1/2"X1-1/4" PVC,SLIP X FNPT 1279190 NIPPLE,1-1/4" X CLOSE,PVC SCHEDULE 80 19316 PUMP,SUBMERSIBLE,.25HP,115VAC 1

WSP4000 PUMP ASSEMBLY

PART NUMBER DESCRIPTION QTY27910 DUSTCAP,1.5",POLYPRO 127906 CAMLOCK,1.5"MALE CAM X MNPT,POLYPRO 127914 BULKHEAD,1.5",TXT,POLYPRO 127919 NIPPLE,1-1/2" X CLOSE,PVC 127902 UNION,1.5 (F)T-T,PVC 127901 NIPPLE,1.5 X 3,80 THREAD,PVC 1279041 ELBOW,90,1.5",SLIP X SLIP,PVC SCHEDULE 80 127892 SLIP CONNECTOR,1.5",PVC,SCH40 131672 REDUCING BUSHING,1-1/2"X1-1/4" PVC,SLIP X FNPT 1279190 NIPPLE,1-1/4" X CLOSE,PVC SCHEDULE 80 19316 PUMP,SUBMERSIBLE,.25HP,115VAC 1

A

B C

D

7

18

4

5

3

13

20

1

2

19

17

34

35

36

WSP 4000 BASE ASM HAS ADDITIONALLARGE RING - #34820 (QTY. 1)

M6 LOCK NUT - #34876 (QTY. 2)M6 FENDER WASHER - #34819 (QTY. 2)

M6x25 SCREW - #3481701 (QTY. 2)STAR WASHER - #25000 (QTY. 2)

B E.C.O. # 589 9/26/08 D.J.S.

C E.C.O. # 647 4/1/09 D.J.S.

4/30/07 D.J.S.

WSP BASE ASM

000 E 0194 US C

PART # ITEM # DESCRIPTION QTY.21686 1 Wheel Frame Assembly 1

30010000 2 Caster, Swivel, 125mm, with Stud and Brake 2

21677 3 Foot Release, Water Vac 1

21655 4 Wheel, Pneumatic, 300mm 2

31802 5 Collar, 20mm/.75in 2

31805 6 M1x40 Reinforcement Caster Peg 2

25080 7 Push Handle, D1,W2 1

20044 8 M8 Hex Nut, Zinc 2

25061 9 M8 Flat Washer, Zinc 14

30029 10 M8 Lock Nut, Zinc 4

25031 11 M8x30 Hex Cap, Zinc 2

Default 12 M6x30 Allen Head Screw 2

34876 13 M6 Lock Nut, Zinc 6

25067 14 M6 Flat Washer 10

200656 15 Spacer, Filter Cage 4



21497 18 Cone, D1/W2, 200mm Opening, Red 1

31910 19 Gate Valve, 2in MNPT x FNPT, PVC, Black 1- 20 Sludge Discharge Asembly 1

20039 21 M6 Split Lock Washer, Zinc 6

25037 22 M8 External Washer, Zinc 2

21556 23 M10x30 Hex Cap 2

20192 24 M10 Flat Washer, Zinc 2

34817 25 M6x20 Allen Head Screw 2

50004 26 1/2" Hex Nut 2

50002 27 1/2" Split Lock Washer, Zinc 2

50001 28 1/2" Flat Washer 2

34852 29 Dust Pan Tension Lever 2

20027 30 Flat steel Pivot, 20x5x45mm 2

34922 31 Pin, D6x19mm 2

34923 32 C Spring Clip, Zinc 2

5060E 33 Wheel, Plastic, For Floor Tool 2

34820 34 Large Housing Spacer, Red 1

32039 35 Handle Support, Plastic 2

32988 36 #8-1 Phillips Truss Head, Zinc 4

3481701 37 M6x25 Allen Head Screw 2

25000 38 1/4" External Star Washer 2

34819 39 M6 Fender Washer 2

300452 40 Lock Washer, M10, Zinc 2

D

C

B

AA

B

C

D

12345678

8 7 6 5 4 3 2 1



NEXT ASSY USED ON

APPLICATION



FINISH

--

--

DRAWN

CHECKED

ENG APPR.

MFG APPR.

Q.A.

COMMENTS:

DATE NAME 54 WINTER ST.Holyoke, Ma. 01040

TITLE:

SIZE

BDWG. NO. REV


REVISIONS



DETAIL B SCALE 1 : 2

1721

14

26

27

28

DETAIL C SCALE 1 : 2

16

22

9

6

23

24

C E.C.O. # 647

E.C.O. # 589B

DETAIL D SCALE 1 : 3

251721

1

4/30/07 D.J.S.

37

38

39

13

DETAIL A SCALE 1 : 2

33

32

14

10

9

29 98 9 11

31

12

14 16

9

109

13 1430

15

30

3

WSP BASE ASM

000 E 0194 US C

9/26/08 D.J.S.

D.J.S.4/1/09

D

C

B

AA

B

C

D

12345678

8 7 6 5 4 3 2 1



NEXT ASSY USED ON

APPLICATION



FINISH

--

--

DRAWN

CHECKED

ENG APPR.

MFG APPR.

Q.A.

COMMENTS:

DATE NAME 54 WINTER ST.Holyoke, Ma. 01040

TITLE:

SIZE

BDWG. NO. REV


REVISIONS



Ruwac USA Industrial Vacuums WSP 2000 & 4000 (Wet Vac) … MANUALS/WSP 2000 an… · 9 27014 Motor...

Documents

Transcript of Ruwac USA Industrial Vacuums WSP 2000 & 4000 (Wet Vac) … MANUALS/WSP 2000 an… · 9 27014 Motor...