RUST CONVERTER - Amazon S3 · Learn more at RUST CONVERTER Automotive repairs and restoration no...

2
Learn more at w.fertan.com RUST CONVERTER Automotive repairs and restoration no longer require deep scrubbing and sandblasting. With its simple application, FERTAN ® Rust Converter pulverizes rust, converting automotive surfaces into a blackened metal that’s ideal as a fresh paint base. FERTAN Rust Converter also leaves a protective zinc coating that prevents recurrent rusting for up to 6 months. Recommended for: Long-term, protective rust treatment for maintenance interventions on previously painted, oxidized metal parts alication instructions 1. Sand to create smooth surface (if needed). 2. Use silicate remover to remove residue. 3. Rinse surface with clean water. 4. Apply FERTAN with a brush, roller, sponge or spray. 1 liter covers approximately 130–160 ft 2 (12–15 m 2 ) of oxidized metal surface. Note: Wet surfaces are optimal. In dryer conditions, wet surfaces with a light water fog. 5. Wash off any spatters of FERTAN within 1 hour of application. 6. Wait at least 48 hours and check that rust is completely converted to a black layer. 7. When the area turns a blue/gray color, rinse FERTAN off completely with water. 8. Once dry, FERTAN Rust Converter can be primed and painted right away, or if needed, can be left for up to 6 months untreated before rust will begin to reoccur. Two steps in one – rust removal & zinc protection Prevents future rusting Easy application 48 hour conversion time Cost effective compared to sandblasting Water-based, non-toxic & nonflammable Completely removes rust instead of masking Can be applied by roller, sponge, or spray Unlimited shelf life, even after opening Reacts well on wet surfaces & in wet conditions Cleans off unwanted surfaces with water product highlights differentiators

Transcript of RUST CONVERTER - Amazon S3 · Learn more at RUST CONVERTER Automotive repairs and restoration no...

Learn more at www.fertan.com

RUST CONVERTER

Automotive repairs and restoration no longer require deep scrubbing and sandblasting. With its simple application, FERTAN® Rust Converter pulverizes rust, converting automotive surfaces into a blackened metal that’s ideal as a fresh paint base. FERTAN Rust Converter also leaves a protective zinc coating that prevents recurrent rusting for up to 6 months.

Recommended for: Long-term, protective rust treatment for maintenance interventions on previously painted,

oxidized metal parts

application instructions1. Sand to create smooth surface (if needed).

2. Use silicate remover to remove residue.

3. Rinse surface with clean water.

4. Apply FERTAN with a brush, roller, sponge or spray. 1 liter covers approximately 130–160 ft2 (12–15 m2) of oxidized metal surface.

Note: Wet surfaces are optimal. In dryer conditions, wet surfaces with a light water fog.

5. Wash off any spatters of FERTAN within 1 hour of application.

6. Wait at least 48 hours and check that rust is completely converted to a black layer.

7. When the area turns a blue/gray color, rinse FERTAN off completely with water.

8. Once dry, FERTAN Rust Converter can be primed and painted right away, or if needed, can be left for up to 6 months untreated before rust will begin to reoccur.

• Two steps in one – rust removal & zinc protection• Prevents future rusting • Easy application• 48 hour conversion time• Cost effective compared to sandblasting

• Water-based, non-toxic & nonflammable• Completely removes rust instead of masking• Can be applied by roller, sponge, or spray• Unlimited shelf life, even after opening• Reacts well on wet surfaces & in wet conditions• Cleans off unwanted surfaces with water

product highlights

differentiators

Learn more at www.fertan.com

Safety Precaution: In case of contact with skin, wash with plenty of running water.

ADVANTAGES / COMPETITORS FERTAN vs SANDBLASTING

Specification of service

unit time per unit Price per unit coverage area Total price Total time

Sandblasting Square Foot (ft2) 6 min $3.90 172 ft2 $62.40 96 min

Protection withZinc spray

Square Foot (ft2) 6 min $13.44 172 ft2 $215.04 96 min

TOTAL Square Foot (ft2) 12 min $17.34 172 ft2 $277.44 192 min

FERTAN Square Foot (ft2)1 min

(by spray)$1.40 172 ft2 $22.40 16 min

a simple sandblasting alternativefertan® rust converter offers a 64% cost savings as compared to sandblasting

©2015 CRP Industries® Inc. All Rights Reserved. FERR

C-1

www.crpautomotive.com | [email protected] | 800-526-4066